The second 1.16 bug-fix release (1.16.2) was released on 3 December 2019.
This release only contains bugfixes and it should be safe to update from 1.16.1.
Highlighted bugfixes in 1.16.2
Interlaced video scaling fixes
CineForm video support in AVI
audiorate: avoid glitches due to rounding errors after changing rate
Command line tool output printing improvements on Windows
various performance improvements, memory leak fixes and security fixes
VP9 decoding fixes
avfvideosrc: Explicitly request video permission on macOS 10.14+
wasapi: bug fixes and stability improvements
webrtc-audio-processing: fix segmentation fault on 32-bit windows
tsdemux: improved handling of certain discontinuities
vaapi h265 decoder: wait for I-frame before trying to decode
gstreamer
gst-launch: Fix ugly stdout on Windows
tee: Make sure to actually deactivate pads that are released
bin: Drop need-context messages without source instead of crashing
gst: Don't pass miniobjects to GST_DEBUG_OBJECT() and similar macros
tracers: Don't leak temporary GstStructure
gst-plugins-base
xvimagepool: Update size, stride, and offset with allocated XvImage
video-converter: Fix RGB-XYZ-RGB conversion
audiorate: Update next_offset on rate change
audioringbuffer: Reset reorder flag before check
audio-buffer: Don't fail to map buffers with zero samples
videorate: Fix max-duplication-time handling
gl/gbm: ensure we call the resize callback before attempting to draw
video-converter: Various fixes for interlaced scaling
gstrtspconnection: messages_bytes not decreased
check: Don't use real audio devices for tests
riff: add CineForm mapping
glfilters: Don't use static variables for storing per-element state
glupload: Add VideoMetas and GLSyncMeta to the raw uploaded buffers
streamsynchronizer: avoid pad release race during logging.
gst-play: Use gst_print* to avoid broken stdout string on Windows
gst-plugins-good
vp9dec: Fix broken 4:4:4 8bits decoding
rtpsession: add locking for clear-pt-map
rtpL16depay: don't crash if data is not modulo channels*width
wavparse: Fix push mode ignoring audio with a size smaller than segment buffer
wavparse: Fix push mode ignoring last audio payload chunk
aacparse: fix wrong offset of the channel number in adts header
jpegdec: Fix incorrect logic in EOI tag detection
videocrop: Also update the coordinate when in-place
jpegdec: don't overwrite the last valid line
vpx: Error out if enabled and no features found
v4l2videodec: ensure pool exists before orphaning it
v4l2videoenc: fix type conversion errors
v4l2bufferpool: Queue number of allocated buffers to capture
v4l2object: fix mpegversion number typo
v4l2object: Work around bad TRY_FMT colorimetry implementations
gst-plugins-bad
avfvideosrc: Explicitly request video permission on macOS 10.14+
wasapi: Various fixes and a workaround for a specific driver bug
wasapi: Move to CoInitializeEx for COM initialization
wasapi: Fix runtime/build warnings
waylandsink: Commit the parent after creating subsurface
msdkdec: fix surface leak in msdkdec_handle_frame
tsmux: Fix copying of buffer region
tsdemux: Handle continuity mismatch in more cases
tsdemux: Always issue a DTS even when it's equal to PTS
openexr: Fix build with OpenEXR 2.4 (and also OpenEXR 2.2 on Ubuntu 18.04)
ccextractor: Always forward all sticky events to the caption pad
pnmdec: Return early on ::finish() if we have no actual data to parse
ass: avoid infinite unref loop with bad data
fluidsynth: add sf3 to soundfont search path
webrtcdsp/webrtcechoprobe segmentation fault on windows (1.16.0 x86)
gst-libav
avvidenc: Fix error propagation
avdemux: Fix segmentation fault if long_name is NULL
avviddec: Fix huge leak caused by circular reference
avviddec: Enforce allocate new AVFrame per input frame
avdec_mpeg2video (and probably more): Huge memory leak in git master
gst-rtsp-server
rtsp-media: Use lock in gst_rtsp_media_is_receive_only
rtsp-client: RTP Info when completed_sender
rtsp-client: fix location uri-format by getting uri directly from context instead
gstreamer-vaapi
meson build: halt configuration if no renderer API
libs: decoder: h265: skip all pictures prior the first I-frame
libs: window: x11: Avoid usage of deprecated API
gst-editing-services
Initialize debug categories before usage
gst-build
gst-env: Use locally built GStreamer utility programs
1.16.1
The first 1.16 bug-fix release (1.16.1) was released on 23 September 2019.
This release only contains bugfixes and it should be safe to update from 1.16.0.
Highlighted bugfixes in 1.16.1
GStreamer-vaapi: fix green frames and decoding artefacts in some cases
OpenGL: fix wayland event source burning CPU in certain circumstances
Memory leak fixes and memory footprint improvements
Performance improvements
Stability and security fixes
Fix enum for GST_MESSAGE_DEVICE_CHANGED which is technically an API break, but this is only used internally in GStreamer and duplicated another message enum
hls: Make crypto dependency optional when hls-crypto is auto
player: fix switching back and forth between forward and reverse playback
decklinkaudiosink: Drop late buffers
openh264enc: Fix compilation with openh264 v2.0
wasapisrc: fix segtotal value being always 2
android: Fix gnutls issue causing a FORTIFY crash on Android Q
windows: Fix two crashes due to cross-CRT free when using MSVC
gstreamer core
device: gst_device_create_element() is transfer floating, not transfer full
filesink, fdsink: respect IOV_MAX for the writev iovec array (Solaris)
miniobject: free qdata array when the last qdata is removed (reduces memory footprint)
bin: Fix minor race when adding to a bin
aggregator: Actually handle NEED_DATA return from update_src_caps()
aggregator: Ensure that the source pad is created as a GstAggregatorPad if no type is given in the pad template
latency: fix custom event leaks
registry: Use plugin directory from the build system for relocateable Windows builds
message: fix up enum value for GST_MESSAGE_DEVICE_CHANGED
info: Fix deadlock in gst_ring_buffer_logger_log()
downloadbuffer: Check for flush after seek
identity: Non-live upstream have no max latency
identity: Fix the ts-offset property getter
aggregator: Make parsing of explicit sink pad names more robust
bufferpool: Fix the buffer size reset code
fakesink, fakesrc, identity: sync gst_buffer_get_flags_string() with new flags
multiqueue: never unref queries we do not own
concat: Reset last_stop on FLUSH_STOP too
aggregator: fix flow-return boolean return type mismatch
gstpad: Handle probes that reset the data field
gst: Add support for g_autoptr(GstPromise)
gst-inspect: fix unused-const-variable error in windows
base: Include gstbitwriter.h in the single-include header
Add various Since: 1.16 markers
GST_MESSAGE_DEVICE_CHANGED duplicates GST_MESSAGE_REDIRECT
Targetting wrong meson version
meson: Make get_flex_version.py script executable
meson: Link to objects instead of static helper library
meson: set correct install path for gdb helper
meson: fix warning about configure_file() install kwarg
gst-plugins-base
video-info: parse field-order for all interleaved formats
tests: fix up valgrind suppressions for glibc getaddrinfo leaks
meson: Reenable NEON support (in audio resampler)
audio-resampler: Update NEON to handle remainders not multiples of 4
eglimage: Fix memory leak
audiodecoder: Set output caps with negotiated caps to avoid critical info printed
video-frame: Take TFF flag from the video info if it was set in there
glcolorconvert: Fix external-oes shader
video-anc: Fix ADF detection when trying to extract data from vanc
gl/wayland: fix wayland event source burning CPU
configure: add used attribute in order to make NEON detection working with -flto.
audioaggregator: Return a valid rate range from caps query if downstream supports a whole range
rtspconnection: data-offset increase not set
rtpsconnection: Fix number of n_vectors
video-color: Add compile-time assert for ColorimetryInfo enum
audiodecoder: Fix leak on failed audio gaps
glupload: Keep track of cached EGLImage texture format
playsink: Set ts-offset to text sink.
meson.build: use join_paths() on prefix
compositor: copy frames as-is when possible
compositor: Skip background when a pad obscures it completely
rtspconnection: Start CSeq at 1 (some servers don't cope well with seqnum 0)
viv-fb: fix build break for GST_GL_API
gl/tests: fix shader creation tests part 2
gl/tests: fix shader creation tests
wayland: set the event queue also for the xdg_wm_base object
video: Added GI annotation for gstvideoaffinetransformationmeta apply_matrix
compositor: Remove unneeded left shift for ARGB/AYUV SOURCE operator
Colorimetry fixes
alsasrc: Don't use driver timestamp if it's zero
gloverlaycompositor: fix crash if buffer doesn't have video meta
meson: Don't try to find gio-unix on Windows
glshader: fix default external-oes shaders
subparse: fix pushing WebVTT cue with no newline at the end
meson: Missing "android" choice in gl_winsys
video test: Keep BE test inline with LE test
id3tag: Correctly validate the year from v1 tags before passing to GstDateTime
gl/wayland: Don't prefix wl_shell struct field
eglimage: Add compatibility define for DRM_FORMAT_NV24
Add various Since: 1.16 markers
video-anc: Handle SD formats correctly
Docs: add GL_CFLAGS to GTK_DOC_CFLAGS
GL: using vaapi and showing on glimagesink on wayland loads one core for 100% on 1.16
GL: external-oes shader places precision qualifier before #extension (was: androidmedia amcviddec fail after 1.15.90 1.16.0 update)
gst-plugins-good
alpha: Fix one_over_kc calculation on arm/aarch64
souphttpsrc: Fix incompatible type build warning
rtpjitterbuffer: limit max-dropout-time to maxint32
rtpjitterbuffer: Clear clock master before unreffing
qtdemux: Use empty-array safe way to cleanup GPtrArray
v4l2: Fix type compatibility issue with glibc 2.30
valgrind: suppress Cond error coming from gnutls and Ignore leaks caused by shout/sethostent
rtpfunnel: forward correct segment when switching pad
gtkglsink: fix crash when widget is resized after element destruction
jpegdec: Don't dereference NULL input state if we have no caps in TIME segments
rtp: opuspay: fix memory leak in gst_rtp_opus_pay_setcaps
v4l2videodec: return right type for drain.
rtpssrcdemux: Avoid taking streamlock out-of-band
Support v4l2src buffer orphaning
splitmuxsink: Only set running time on finalizing sink element when in async-finalize mode
rtpsession: Always keep at least one NACK on early RTCP
rtspsrc: do not try to send EOS with invalid seqnum
rtpsession: Call on-new-ssrc earlier
rtprawdepay: Don't get rid of the buffer pool on FLUSH_STOP
rtpbin: Free storage when freeing session
scaletempo: Advertise interleaved layout in caps templates
Support v4l2src buffer orphaning
gst-plugins-bad
hls: Make crypto dependency optional when hls-crypto is auto
player: fix switching back and forth between forward and reverse playback
decklinkaudiosink: Drop late buffers
srt: Add stats property, include sender-side statistics and fix a crash
dshowsrcwrapper: fix regression on device selection
tsdemux: Limit the maximum PES payload size
wayland: Define libdrm_dep in meson.build to fix meson configure error when kms is disabled
sctp: Fix crash on free() when using the MSVC binaries
webrtc: Fix signals documentation
h264parse: don't critical on VUI parameters > 2^31
rtmp: Fix crash inside free() with MSVC on Windows
iqa: fix leak of map_meta.data
d3dvideosink: Fix crash on WinProc handler
amc: Fix crash when a sync_meta survives its sink
pitch: Fix race between putSamples() and setting soundtouch parameters
webrtc: fix type of max-retransmits, make it work
mxfdemux: Also allow picture essence element type 0x05 for VC-3
wasapi: fix symbol redefinition build error
decklinkvideosrc: Retrieve mode of the ancillary data from the frame
decklinkaudiosrc/decklinkvideosrc: Do nothing in BaseSrc::negotiate() and...
adaptivedemux: do not retry downloads during shutdown.
webrtcbin: fix GInetAddress leak
dtls: fix dtls connection object leak
siren: fix a global buffer overflow spotted by asan
kmssink: Fix implicit declaration build error
Fix -Werror=return-type error in configure.
aiff: Fix infinite loop in header parsing.
nvdec: Fix possible frame drop on EOS
srtserversrc: yields malformed rtp payloads
srtsink: Fix crash in case no URI
dtlsagent: Fix leaked dtlscertificate
meson: bluez: Early terminate configure on Windows
decklink: Correctly ensure >=16 byte alignment for the buffers we allocate
webrtcbin: fix DTLS when receivebin is set to DROP
zbar: Include running-time, stream-time and duration in the messages
uvch264src: Make sure we set our segment
avwait: Allow start and end timecode to be set back to NULL
avwait: Don't print warnings for every buffer passed
hls/meson: fix dependency logic
Waylandsink gnome shell workaround
avwait: Allow setting start timecode after end timecode; protect propeties with mutex
wayland/wlbuffer: just return if used_by_compositor is true when attach
proxy: Set SOURCE flag on the source and SINK flag on the sink
ivfparse: Check the data size against IVF_FRAME_HEADER_SIZE
webrtc: Add various Since markers to new types after 1.14.0
msdk: fix the typo in debug category
dtlsagent: Do not overwrite openssl locking callbacks
meson: Fix typo in gsm header file name
srt: handle races in state change
webrtc: Add g_autoptr() support for public types
openh264enc: Fix compilation with openh264 v2.0
meson: Allow CUDA_PATH fallback on linux
meson: fix build with opencv=enabled and opencv4. Fixes#964
meson: Add support for the colormanagement plugin
autotools: gstsctp: set LDFLAGS
nvenc/nvdec: Add NVIDIA SDK headers to noinst_HEADERS
h264parse: Fix typo when setting multiview mode and flags
Add various Since: 1.16 markers
opencv: allow compilation against 4.1.x
Backport of some minor srt commits without MR into 1.16
meson: fix build with opencv=enabled and opencv4
wasapisrc: fix segtotal value being always 2 due to an unused variable
meson: colormanagement missing
androidmedia amcviddec fail after 1.15.90 1.16.0 update
gst-plugins-ugly
meson: Always require the gmodule dependency
gst-libav
docs: don't include the type hierarchy, fixing build with gtk-doc 1.30
avvidenc: Correctly signal interlaced input to ffmpeg when the input caps are interlaced
autotools: add bcrypt to win32 libs
gstav: Use libavcodec util function for version check
API documentation fails to build with gtk-doc 1.30
gst-rtsp-server
rtsp-client: RTP Info must exist in PLAY response
onvif-media: fix "void function returning a value" compiler warning
Add various Since: 1.16 markers
gstreamer-vaapi
fix egl context leak and display creation race
pluginutil: Remove Mesa from drivers white list
Classify vaapidecodebin as a hardware decoder
Fix two leak
vaapivideomemory: demote error message to info
encoder: vp8,vp9: reset frame_counter when input frame's format changes
encoder: mpeg2: No packed header for SPS and PPS
decoder: vp9: clear parser pointer after release
encoder: Fixes deadlock in change state function
encoder: h265: reset num_ref_idx_l1_active_minus1 when low delay B.
encoder: not call ensure_num_slices inside g_assert()
encoder: continue if roi meta is NULL
decoder: vp9: Set chroma_ ype by VP9 bit_depth
vaapipostproc: don't do any color conversion when GL_TEXTURE_UPLOAD
libs: surface: fix double free when dmabuf export fails
h264 colors and artifacts upon upgrade to GStreamer Core Library version 1.15.90
gst-editing-services
element: Properly handle the fact that pasting can return NULL
Add various missing Since markers
launch: Fix caps restriction short names
python: Avoid warning about using deprecated methods
video-transition: When using non crossfade effect use 'over' operations
meson: Generate a pkgconfig file for the GES plugin
gst-devtools
launcher: testsuites: skip systemclock stress tests
validate: fix build on macOS
gst-build
Update win flex bison binaries
Update the flexmeson windows binary version
Don't allow people to run meson inside the uninstalled env
Contributors to 1.16.1
Aaron Boxer, Adam Duskett, Alicia Boya García, Andoni Morales Alastruey, Antonio Ospite, Arun Raghavan, Askar Safin, A. Wilcox, Charlie Turner, Christoph Reiter, Damian Hobson-Garcia, Daniel Klamt, Danny Smith, David Gunzinger, David Ing, David Svensson Fors, Doug Nazar, Edward Hervey, Eike Hein, Fabrice Bellet, Fernando Herrrera, Georg Lippitsch, Göran Jönsson, Guillaume Desmottes, Haihao Xiang, Haihua Hu, Håvard Graff, Hou Qi, Ignacio Casal Quinteiro, Ilya Smelykh, Jan Schmidt, Javier Celaya, Jim Mason, Jonas Larsson, Jordan Petridis, Jose Antonio Santos Cadenas, Juan Navarro, Knut Andre Tidemann, Kristofer Björkström, Lucas Stach, Marco Felsch, Marcos Kintschner, Mark Nauwelaerts, Martin Liska, Martin Theriault, Mathieu Duponchelle, Matthew Waters, Michael Olbrich, Mike Gorse, Nicola Murino, Nicolas Dufresne, Niels De Graef, Niklas Hambüchen, Nirbheek Chauhan, Olivier Crête, Philippe Normand, Ross Burton, Sebastian Dröge, Seungha Yang, Song Bing, Thiago Santos, Thibault Saunier, Thomas Coldrick, Tim-Philipp Müller, Víctor Manuel Jáquez Leal, Vivia Nikolaidou, Xavier Claessens, Yeongjin Jeong,
... and many others who have contributed bug reports, translations, sent suggestions or helped testing. Thank you all!
List of merge requests and issues fixed in 1.16.1
List of Merge Requests applied in 1.16
List of Issues fixed in 1.16.1
Known Issues
possibly breaking/incompatible changes to properties of wrapped FFmpeg decoders and encoders (see above).
The way that GIO modules are named has changed due to upstream GLib natively adding support for loading static GIO modules. This means that any GStreamer application using gnutls for SSL/TLS on the Android or iOS platforms (or any other setup using static libraries) will fail to link looking for the g_io_module_gnutls_load_static() function. The new function name is now g_io_gnutls_load(gpointer data). See Android/iOS sections above for further details.
GStreamer 1.16.0:
Introduction
The GStreamer team is proud to announce a new major feature release in
the stable 1.x API series of your favourite cross-platform multimedia
framework!
As always, this release is again packed with many new features, bug
fixes and other improvements.
Highlights
- GStreamer WebRTC stack gained support for data channels for
peer-to-peer communication based on SCTP, BUNDLE support, as well as
support for multiple TURN servers.
- AV1 video codec support for Matroska and QuickTime/MP4 containers
and more configuration options and supported input formats for the
AOMedia AV1 encoder
- Support for Closed Captions and other Ancillary Data in video
- Support for planar (non-interleaved) raw audio
- GstVideoAggregator, compositor and OpenGL mixer elements are now in
-base
- New alternate fields interlace mode where each buffer carries a
single field
- WebM and Matroska ContentEncryption support in the Matroska demuxer
- new WebKit WPE-based web browser source element
- Video4Linux: HEVC encoding and decoding, JPEG encoding, and improved
dmabuf import/export
- Hardware-accelerated Nvidia video decoder gained support for VP8/VP9
decoding, whilst the encoder gained support for H.265/HEVC encoding.
- Many improvements to the Intel Media SDK based hardware-accelerated
video decoder and encoder plugin (msdk): dmabuf import/export for
zero-copy integration with other components; VP9 decoding; 10-bit
HEVC encoding; video post-processing (vpp) support including
deinterlacing; and the video decoder now handles dynamic resolution
changes.
- The ASS/SSA subtitle overlay renderer can now handle multiple
subtitles that overlap in time and will show them on screen
simultaneously
- The Meson build is now feature-complete (*) and it is now the
recommended build system on all platforms. The Autotools build is
scheduled to be removed in the next cycle.
- The GStreamer Rust bindings and Rust plugins module are now
officially part of upstream GStreamer.
- The GStreamer Editing Services gained a gesdemux element that allows
directly playing back serialized edit list with playbin or
(uri)decodebin
- Many performance improvements
Highlighted bugfixes in 1.14.3
* opusenc: fix crash on 32-bit platforms
* compositor: fix major buffer leak when doing crossfading on some
but not all pads
* wasapi: various fixes for wasapisrc and wasapisink regressions
* x264enc: Set bit depth to fix "This build of x264 requires 8-bit
depth. Rebuild to..." runtime errors with x264 version ≥ 153
* audioaggregator, audiomixer: caps negotiation fixes
* input-selector: latency handling fixes
* playbin, playsink: audio visualization support fixes
* dashdemux: fix possible crash if stream is neither isobmff nor
isoff_ondemand profile
* opencv: Fix build for opencv >= 3.4.2
* h265parse: miscellaneous fixes backported from h264parse
* pads: fix changing of pad offsets from inside pad probes
* pads: ensure that pads are blocked for IDLE probes if they are
called from the streaming thread too
Highlighted bugfixes in 1.14.4
* glviewconvert: wait and set the gl sync meta on buffers
* glviewconvert: Copy composition meta from the primary buffer to
both outputs
* glcolorconvert: Don't copy overlay composition meta over to NULL
outbufs
* matroskademux: add functionality needed for MSE use case fixing
youtube playback in epiphany/webkit-gtk
* msdk: fix build on windows
* opusenc: fix another crash on 32-bit x86 on windows (alignment
issue in SSE optimisations)
* osxaudio: add support for parsing more channel layouts
* tagdemux: Use upstream GST_EVENT_STREAM_START (and stream-id) if
present
* vorbisdec: fix header handling regression: init decoder immediately
once we have headers
* wasapisink: recover from low buffer levels in shared mode
* fix GstSegment unit test which would fail on some 32-bit x86 CPUs
1.14.1
Noteworthy bugfixes in 1.14.1
- GstPad: Fix race condition causing the same probe to be called
multiple times
- Fix occasional deadlocks on windows when outputting debug logging
- Fix debug levels being applied in the wrong order
- GIR annotation fixes for bindings
- audiomixer, audioaggregator: fix some negotiation issues
- gst-play-1.0: fix leaving stdin in non-blocking mode after exit
- flvmux: wait for caps on all input pads before writing header even
if source is live
- flvmux: don't wake up the muxer unless there is data, fixes busy
looping if there's no input data
- flvmux: fix major leak of input buffers
- rtspsrc, rtsp-server: revert to RTSP RFC handling of
sendonly/recvonly attributes
- rtpvrawpay: fix payloading with very large mtu sizes where
everything fits into a single RTP packet
- v4l2: Fix hard-coded enabled v4l2 probe on Linux/ARM
- v4l2: Disable DMABuf for emulated formats when using libv4l2
- v4l2: Always set colorimetry in S_FMT
- asfdemux: Set stream-format field for H264 streams and handle H.264
in bytestream format
- x265enc: Fix tagging of keyframes on output buffers
- ladspa: Fix critical during plugin load on Windows
- decklink: Fix COM initialisation on Windows
- h264parse: fix re-use across pipeline stop/restart
- mpegtsmux: fix force-keyframe event handling and PCR/PMT changes
that would confuse some players with generated HLS streams
- adaptivedemux: Support period change in live playlist
- rfbsrc: Fix support for applevncserver and support NULL pool in
decide_allocation
- jpegparse: Fix APP1 marker segment parsing
- h265parse: Make caps writable before modifying them, fixes criticals
- fakevideosink: request an extra buffer if enable-last-sample is
enabled
- wasapisrc: Don't provide a clock based on WASAPI's clock
- wasapi: Only use audioclient3 when low-latency, as it might
otherwise glitch with slow CPUs or VMs
- wasapi: Don't derive device period from latency time, should make it
more robust against glitches
- audiolatency: Fix wave detection in buffers and avoid bogus pts
values while starting
- msdk: fix plugin load on implementations with only HW support
- msdk: dec: set framerate to the driver only if provided, not in 0/1
case
- msdk: Don't set extended coding options for JPEG encode
- rtponviftimestamp: fix state change function init/reset causing
races/crashes on shutdown
- decklink: fix initialization failure in windows binary
- ladspa: Fix critical warnings during plugin load on Windows and fix
dependencies in meson build
- gl: fix cross-compilation error with viv-fb
- qmlglsink: make work with eglfs_kms
- rtspclientsink: Don't deadlock in preroll on early close
- rtspclientsink: Fix client ports for the RTCP backchannel
- rtsp-server: Fix session timeout when streaming data to client over
TCP
- vaapiencode: h264: find best profile in those available, fixing
negotiation errors
- vaapi: remove custom GstGL context handling, use GstGL instead.
Fixes GL Context sharing with WebkitGtk on wayland
- gst-editing-services: various fixes
- gst-python: bump pygobject req to 3.8; fix
GstPad.set_query_function(); dist autogen.sh and configure.ac in
tarball
- g-i: pick up GstVideo-1.0.gir from local build directory in GstGL
build
- g-i: update constant values for bindings
- avoid duplicate symbols in plugins across modules in static builds
- ... and many, many more!
The GStreamer team is proud to announce a new major feature release of your favourite cross-platform multimedia framework!
The 1.14 release series adds new features on top of the previous 1.12 series and is part of the API and ABI-stable 1.x release series of the GStreamer multimedia framework.
Highlights:
WebRTC support: real-time audio/video streaming to and from web browsers
Experimental support for the next-gen royalty-free AV1 video codec
Video4Linux: encoding support, stable element names and faster device probing
Support for the Secure Reliable Transport (SRT) video streaming protocol
RTP Forward Error Correction (FEC) support (ULPFEC)
RTSP 2.0 support in rtspsrc and gst-rtsp-server
ONVIF audio backchannel support in gst-rtsp-server and rtspsrc
playbin3 gapless playback and pre-buffering support
tee, our stream splitter/duplication element, now does allocation query aggregation which is important for efficient data handling and zero-copy
QuickTime muxer has a new prefill recording mode that allows file import in Adobe Premiere and FinalCut Pro while the file is still being written.
rtpjitterbuffer fast-start mode and timestamp offset adjustment smoothing
souphttpsrc connection sharing, which allows for connection reuse, cookie sharing, etc.
nvdec: new plugin for hardware-accelerated video decoding using the NVIDIA NVDEC API
Adaptive DASH trick play support
ipcpipeline: new plugin that allows splitting a pipeline across multiple processes
Major gobject-introspection annotation improvements for large parts of the library API
GStreamer C# bindings have been revived and seen many updates and fixes
The externally-maintained GStreamer Rust bindings have many usability improvements and cover most of the API now
Bugs fixed in 1.12.5:
pad: fix some stream deactivation deadlocks/races
registrychunks: don't read from unaligned memory when loading registry
ptp: fix build failure with #undef USE_MEASUREMENT_FILTERING
downloadbuffer: Don't hold the mutex while posting the download-complete message
playbin3: Fix accessing invalid index in GstStream when received select-stream event
id3v2: re-fix handling of ID3 v2.4 tags with extended headers
audio: fix handling of U32BE format
videodecoder: Reset QoS time after pushing segment. This fixes playbin gapless playback with videos.
subparse: push out of last chunk of text if last line has no newline
aacparse: When parsing raw input, accept frames of any size. This fixes handling of encoded silence.
splitmuxsrc: Improve not-linked handling.
rtspsrc: also proxy multicast-iface property to RTCP udpsrc
flacdec: flush flac decoder on lost sync, so that it can re-sync.
matroskamux: Only mark new clusters as keyframe if they start on a keyframe or we're muxing only audio
matroskamux: Clip maximum cluster duration to the maximum possible value
h264parse: reset internal 'state' variable properly
x264enc: fix build with newer x264 with support for multiple bit depths
x265enc: Fix tagging of keyframes on output buffers
glimagesink: Correct PAR in output caps when transforming
vtdec: destroy and create the GL context on start()/stop(), fixing a refcount loop
player: fix criticals when reading info/track properties that are NULL
lv2: fix inverted boolean properties
rtponviftimestamp: fix state change function init/reset, fixing memory corruption or leaks on shutdown
libav: some build issues fixes
rtsp-server: Place netaddress meta on packets received via TCP. Fixes keep-alive via RTCP in TCP interleaved mode.
rtsp-server: gi annotation fixes
gst-libav: internal ffmpeg copy was updated to ffmpeg 3.3.6
Various fixes for memory leaks, deadlocks and crashes in all modules
... and many, many more!
The actual fix as been done by "pkglint -F */*/buildlink3.mk", and was
reviewed manually.
There are some .include lines that still are indented with zero spaces
although the surrounding .if is indented. This is existing practice.
Major bugfixes in 1.12.3
Fix for infinite recursion on buffer free in v4l2
Fix for glimagesink crash on macOS when used via autovideosink
Fix for huge overhead in matroskamux caused by writing one
Cluster per audio-frame in audio-only streams. Also use
SimpleBlocks for Opus and other audio codecs, which works around
a bug in VLC that prevented Opus streams to be played and
decreases overhead even more
Fix for flushing seeks in rtpmsrc always causing an error
Fix for timestamp overflows in calculations in audio encoder base class
Fix for RTP h265 depayloader marking P-frames as I-frames
Fix for long connection delays of clients in RTSP server
Fixes for event handling in queue and queue2 elements, and
updates to buffering levels on NOT_LINKED streams
Various fixes to event and buffering handling in decodebin3/playbin3
Various fixes for memory leaks, deadlocks and crashes in all modules
... and many, many more!
Highlights
new msdk plugin for Intel's Media SDK for hardware-accelerated
video encoding and decoding on Intel graphics hardware on Windows
or Linux.
x264enc can now use multiple x264 library versions compiled for
different bit depths at runtime, to transparently provide support
for multiple bit depths.
videoscale and videoconvert now support multi-threaded scaling
and conversion, which is particularly useful with higher
resolution video.
h264parse will now automatically insert AU delimiters if needed
when outputting byte-stream format, which improves standard
compliance and is needed in particular for HLS playback on
iOS/macOS.
rtpbin has acquired bundle support for incoming streams
Major new features and changes Noteworthy new API
The video library gained support for a number of new video
formats:
GBR_12LE, GBR_12BE, GBRA_12LE, GBRA_12BE (planar 4:4:4
RGB/RGBA, 12 bits per channel) GBRA_10LE, GBRA_10BE (planar
4:4:4:4 RGBA, 10 bits per channel) GBRA (planar 4:4:4:4
ARGB, 8 bits per channel) I420_12BE, I420_12LE (planar 4:2:0
YUV, 12 bits per channel) I422_12BE,I422_12LE (planar 4:2:2
YUV, 12 bits per channel) Y444_12BE, Y444_12LE (planar 4:4:4
YUV, 12 bits per channel) VYUY (another packed 4:2:2 YUV
format)
The high-level GstPlayer API was extended with functions for
taking video snapshots and enabling accurate seeking. It can
optionally also use the still-experimental playbin3 element
now.
New Elements
msdk: new plugin for Intel's Media SDK for hardware-accelerated
video encoding and decoding on Intel graphics hardware on Windows
or Linux. This includes an H.264 encoder/decoder (msdkh264dec,
msdkh264enc), an H.265 encoder/decoder (msdkh265dec, msdkh265enc),
an MJPEG encoder/encoder (msdkmjpegdec, msdkmjpegenc), an MPEG-2
video encoder (msdkmpeg2enc) and a VP8 encoder (msdkvp8enc).
iqa is a new Image Quality Assessment plugin based on DSSIM,
similar to the old (unported) videomeasure element.
The faceoverlay element, which allows you to overlay SVG graphics
over a detected face in a video stream, has been ported from
0.10.
our ffmpeg wrapper plugin now exposes/maps the ffmpeg Opus audio
decoder (avdec_opus) as well as the GoPro CineForm HD / CFHD
decoder (avdec_cfhd), and also a parser/writer for the IVF
format (avdemux_ivf and avmux_ivf).
audiobuffersplit is a new element that splits raw audio buffers
into equal-sized buffers
audiomixmatrix is a new element that mixes N:M audio channels
according to a configured mix matrix.
The timecodewait element got renamed to avwait and can operate
in different modes now.
The opencv video processing plugin has gained a new dewarp
element that dewarps fisheye images.
ttml is a new plugin for parsing and rendering subtitles in
Timed Text Markup Language (TTML) format. For the time being
these elements will not be autoplugged during media playback
however, unless the GST_TTML_AUTOPLUG=1 environment variable
is set. Only the EBU-TT-D profile is supported at this point.
New element features and additions
x264enc can now use multiple x264 library versions compiled for
different bit depths at runtime, to transparently provide support
for multiple bit depths. A new configure parameter
--with-x264-libraries has been added to specify additional paths
to look for additional x264 libraries to load. Background is
that the libx264 library is always compile for one specific bit
depth and the x264enc element would simply support the depth
supported by the underlying library. Now we can support multiple
depths.
x264enc also picks up the interlacing mode automatically from
the input caps now and passed interlacing/TFF information
correctly to the library.
videoscale and videoconvert now support multi-threaded scaling
and conversion, which is particularly useful with higher
resolution video. This has to be enabled explicitly via the
"n-threads" property.
videorate's new "rate" property lets you set a speed factor on
the output stream
splitmuxsink's buffer collection and scheduling was rewritten
to make processing and splitting deterministic; before it was
possible for a buffer to end up in a different file chunk in
different runs. splitmuxsink also gained a new "format-location-full"
signal that works just like the existing "format-location"
signal only that it is also passed the primary stream's first
buffer as argument, so that it is possible to construct the
file name based on metadata such as the buffer timestamp or any
GstMeta attached to the buffer. The new "max-size-timecode"
property allows for timecode-based splitting. splitmuxsink will
now also automatically start a new file if the input caps change
in an incompatible way.
fakesink has a new "drop-out-of-segment" property to not drop
out-of-segment buffers, which is useful for debugging purposes.
identity gained a "ts-offset" property.
both fakesink and identity now also print what kind of metas
are attached to buffers when printing buffer details via the
"last-message" property used by gst-launch-1.0 -v.
multiqueue: made "min-interleave-time" a configurable property.
video nerds will be thrilled to know that videotestsrc's snow
is now deterministic. videotestsrc also gained some new properties
to make the ball pattern based on system time, and invert colours
each second ("animation-mode", "motion", and "flip" properties).
oggdemux reverse playback should work again now. You're welcome.
playbin3 and urisourcebin now have buffering enabled by default,
and buffering message aggregation was fixed.
tcpclientsrc now has a "timeout" property
appsink has gained support for buffer lists. For backwards
compatibility reasons users need to enable this explicitly with
gst_app_sink_set_buffer_list_support(), however. Once activated,
a pulled GstSample can contain either a buffer list or a single
buffer.
splitmuxsrc reverse playback was fixed and handling of sparse
streams, such as subtitle tracks or metadata tracks, was improved.
matroskamux has acquired support for muxing G722 audio; it also
marks all buffers as keyframes now when streaming only audio,
so that tcpserversink will behave properly with audio-only
streams.
qtmux gained support for ProRes 4444 XQ, HEVC/H.265 and CineForm
(GoPro) formats, and generally writes more video stream-related
metadata into the track headers. It is also allows configuration
of the maximum interleave size in bytes and time now. For
fragmented mp4 we always write the tfdt atom now as required
by the DASH spec.
qtdemux supports FLAC, xvid, mp2, S16L and CineForm (GoPro)
tracks now, and generally tries harder to extract more video-related
information from track headers, such as colorimetry or interlacing
details. It also received a couple of fixes for the scenario
where upstream operates in TIME format and feeds chunks to
qtdemux (e.g. DASH or MSE).
audioecho has two new properties to apply a delay only to certain
channels to create a surround effect, rather than an echo on
all channels. This is useful when upmixing from stereo, for
example. The "surround-delay" property enables this, and the
"surround-mask" property controls which channels are considered
surround sound channels in this case.
webrtcdsp gained various new properties for gain control and
also exposes voice activity detection now, in which case it
will post "voice-activity" messages on the bus whenever the
voice detection status changes.
The decklink capture elements for Blackmagic Decklink cards
have seen a number of improvements:
decklinkvideosrc will post a warning message on "no signal"
and an info message when the signal lock has been (re)acquired.
There is also a new read-only "signal" property that can
be used to query the signal lock status. The GAP flag will
be set on buffers that are captured without a signal lock.
The new drop-no-signal-frames will make decklinkvideosrc
drop all buffers that have been captured without an input
signal. The "skip-first-time" property will make the source
drop the first few buffers, which is handy since some devices
will at first output buffers with the wrong resolution
before they manage to figure out the right input format and
decide on the actual output caps.
decklinkaudiosrc supports more than just 2 audio channels
now.
The capture sources no longer use the "hardware" timestamps
which turn out to be useless and instead just use the
pipeline clock directly.
srtpdec now also has a readonly "stats" property, just like
srtpenc.
rtpbin gained RTP bundle support, as used by e.g. WebRTC. The
first rtpsession will have a rtpssrcdemux element inside splitting
the streams based on their SSRC and potentially dispatch to a
different rtpsession. Because retransmission SSRCs need to be
merged with the corresponding media stream the ::on-bundled-ssrc
signal is emitted on rtpbin so that the application can find
out to which session the SSRC belongs.
rtprtxqueue gained two new properties exposing retransmission
statistics ("requests" and "fulfilled-requests")
kmssink will now use the preferred mode for the monitor and
render to the base plane if nothing else has set a mode yet.
This can also be done forcibly in any case via the new
"force-modesetting" property. Furthermore, kmssink now allows
only the supported connector resolutions as input caps in order
to avoid scaling or positioning of the input stream, as kmssink
can't know whether scaling or positioning would be more appropriate
for the use case at hand.
waylandsink can now take DMAbuf buffers as input in the presence
of a compatible Wayland compositor. This enables zero-copy
transfer from a decoder or source that outputs DMAbuf. It will
also set surface opacity hint to allow better rendering
optimization in the compositor.
udpsrc can be bound to more than one interface when joining a
multicast group, this is done by giving a comma separate list
of interfaces such as multicast-iface="eth0,eth1".
Plugin moves
dataurisrc moved from gst-plugins-bad to core
The rawparse plugin containing the rawaudioparse and rawvideoparse
elements moved from gst-plugins-bad to gst-plugins-base. These
elements supersede the old videoparse and audioparse elements.
They work the same, with just some minor API changes. The old
legacy elements still exist in gst-plugins-bad, but may be
removed at some point in the future.
timecodestamper is an element that attaches time codes to video
buffers in form of GstVideoTimeCodeMetas. It had a "clock-source"
property which has now been removed because it was fairly useless
in practice. It gained some new properties however: the
"first-timecode" property can be used to set the inital timecode;
alternatively "first-timecode-to-now" can be set, and then the
current system time at the time the first buffer arrives is
used as base time for the time codes.
Plugin removals
The mad mp1/mp2/mp3 decoder plugin was removed from gst-plugins-ugly,
as libmad is GPL licensed, has been unmaintained for a very
long time, and there are better alternatives available. Use the
mpg123audiodec element from the mpg123 plugin in gst-plugins-ugly
instead, or avdec_mp3 from the gst-libav module which wraps the
ffmpeg library. We expect that we will be able to move mp3
decoding to gst-plugins-good in the next cycle seeing that most
patents around mp3 have expired recently or are about to expire.
The mimic plugin was removed from gst-plugins-bad. It contained
a decoder and encoder for a video codec used by MSN messenger
many many years ago (in a galaxy far far away). The underlying
library is unmaintained and no one really needs to use this
codec any more. Recorded videos can still be played back with
the MIMIC decoder in gst-libav.
Miscellaneous API additions
Request pad name templates passed to gst_element_request_pad()
may now contain multiple specifiers, such as e.g. src_%u_%u.
gst_buffer_iterate_meta_filtered() is a variant of
gst_buffer_iterate_meta() that only returns metas of the requested
type and skips all other metas.
gst_pad_task_get_state() gets the current state of a task in a
thread-safe way.
gst_uri_get_media_fragment_table() provides the media fragments
of an URI as a table of key=value pairs.
gst_print(), gst_println(), gst_printerr(), and gst_printerrln()
can be used to print to stdout or stderr. These functions are
similar to g_print() and g_printerr() but they also support all
the additional format specifiers provided by the GStreamer
logging system, such as e.g. GST_PTR_FORMAT.
a GstParamSpecArray has been added, for elements who want to
have array type properties, such as the audiomixmatrix element
for example. There are also two new functions to set and get
properties of this type from bindings:
gst_util_set_object_array() gst_util_get_object_array()
various helper functions have been added to make it easier to
set or get GstStructure fields containing caps-style array or
list fields from language bindings (which usually support
GValueArray but don't know about the GStreamer specific fundamental
types):
gst_structure_get_array() gst_structure_set_array()
gst_structure_get_list() gst_structure_set_list()
a new 'dynamic type' registry factory type was added to register
dynamically loadable GType types. This is useful for automatically
loading enum/flags types that are used in caps, such as for
example the GstVideoMultiviewFlagsSet type used in multiview
video caps.
there is a new GstProxyControlBinding for use with GstController.
This allows proxying the control interface from one property
on one GstObject to another property (of the same type) in
another GstObject. So e.g. in parent-child relationship, one
may need to call gst_object_sync_values() on the child and have
a binding (set elsewhere) on the parent update the value. This
is used in glvideomixer and glsinkbin for example, where
sync_values() on the child pad or element will call sync_values()
on the exposed bin pad or element.
Note that this doesn't solve GObject property forwarding, that
must be taken care of by the implementation manually or using
GBinding.
gst_base_parse_drain() has been made public for subclasses to
use.
`gst_base_sink_set_drop_out_of_segment()' can be used by
subclasses to prevent GstBaseSink from dropping buffers that
fall outside of the segment.
gst_calculate_linear_regression() is a new utility function to
calculate a linear regression.
gst_debug_get_stack_trace is an easy way to retrieve a stack
trace, which can be useful in tracer plugins.
allocators: the dmabuf allocator is now sub-classable, and there
is a new GST_CAPS_FEATURE_MEMORY_DMABUF define.
video decoder subclasses can use the newly-added function
gst_video_decoder_allocate_output_frame_with_params() to pass
a GstBufferPoolAcquireParams to the buffer pool for each buffer
allocation.
the video time code API has gained a dedicated GstVideoTimeCodeInterval
type plus related API, including functions to add intervals to
timecodes.
There is a new libgstbadallocators-1.0 library in gst-plugins-bad,
which may go away again in future releases once the
GstPhysMemoryAllocator interface API has been validated by more
users and was moved to libgstallocators-1.0 from gst-plugins-base.
GstPlayer
New API has been added to:
get the number of audio/video/subtitle streams:
gst_player_media_info_get_number_of_streams()
gst_player_media_info_get_number_of_video_streams()
gst_player_media_info_get_number_of_audio_streams()
gst_player_media_info_get_number_of_subtitle_streams()
enable accurate seeking: gst_player_config_set_seek_accurate()
and gst_player_config_get_seek_accurate()
get a snapshot image of the video in RGBx, BGRx, JPEG, PNG or
native format: gst_player_get_video_snapshot()
selecting use of a specific video sink element
(gst_player_video_overlay_video_renderer_new_with_sink())
If the environment variable GST_PLAYER_USE_PLAYBIN3 is set,
GstPlayer will use the still-experimental playbin3 element and
the GstStreams API for playback.
Miscellaneous changes
video caps for interlaced video may contain an optional
"field-order" field now in the case of interlaced-mode=interleaved
to signal that the field order is always the same throughout
the stream. This is useful to signal to muxers such as mp4mux.
The new field is parsed from/to GstVideoInfo of course.
video decoder and video encoder base classes try harder to proxy
interlacing, colorimetry and chroma-site related fields in caps
properly.
The buffer stored in the PROTECTION events is now left unchanged.
This is a change of behaviour since 1.8, especially for the
mssdemux element which used to decode the base64 parsed data
wrapped in the protection events emitted by the demuxer.
PROTECTION events can now be injected into the pipeline from
the application; source elements deriving from GstBaseSrc will
forward those downstream now.
The DASH demuxer is now correctly parsing the MSPR-2.0
ContentProtection nodes and emits Protection events accordingly.
Applications relying on those events might need to decode the
base64 data stored in the event buffer before using it.
The registry can now also be disabled by setting the environment
variable GST_REGISTRY_DISABLE=yes, with similar effect as the
GST_DISABLE_REGISTRY compile time switch.
Seeking performance with gstreamer-vaapi based decoders was
improved. It would recreate the decoder and surfaces on every
seek which can be quite slow.
more robust handling of input caps changes in videoaggregator-based
elements such as compositor.
Lots of adaptive streaming-related fixes across the board (DASH,
MSS, HLS). Also:
mssdemux, the Microsoft Smooth Streaming demuxer, has seen
various fixes for live streams, duration reporting and
seeking.
The DASH manifest parser now extracts MS PlayReady
ContentProtection objects from manifests and sends them
downstream as PROTECTION events. It also supports multiple
Period elements in external xml now.
gst-libav was updated to ffmpeg 3.3 but should still work with
any 3.x version.
GstEncodingProfile has been generally enhanced so it can, for
example, be used to get possible profiles for a given file
extension. It is now possible to define profiles based on element
factory names or using a path to a .gep file containing a
serialized profile.
audioconvert can now do endianness conversion in-place. All
other conversions still require a copy, but e.g. sign conversion
and a few others could also be implemented in-place now.
The new, experimental playbin3 and urisourcebin elements got
many bugfixes and improvements and should generally be closer
to a full replacement of the old elements.
interleave now supports > 64 channels.
OpenCV elements, grabcut and retinex has been ported to use
GstOpencvVideoFilter base class, increasing code reuse and
fixing buffer map/unmap issues. Redundant copie of images has
been removed in edgedetect, cvlaplace and cvsobel. This comes
with various cleanup and Meson support.
OpenGL integration
As usual the GStreamer OpenGL integration library has seen
numerous fixes and performance improvements all over the place,
and is hopefully ready now to become API stable and be moved
to gst-plugins-base during the 1.14 release cycle.
The GStreamer OpenGL integration layer has also gained support
for the Vivante EGL FB windowing system, which improves performance
on platforms such as Freescale iMX.6 for those who are stuck
with the proprietary driver. The qmlglsink element also supports
this now if Qt is used with eglfs or wayland backend, and it
works in conjunction with gstreamer-imx of course.
various qmlglsrc improvements
Tracing framework and debugging improvements
New tracing hooks have been added to track GstMiniObject and
GstObject ref/unref operations.
The memory leaks tracer can optionally use this to retrieve
stack traces if enabled with e.g.
GST_TRACERS=leaks(filters="GstEvent,GstMessage",stack-traces-flags=full)
The GST_DEBUG_FILE environment variable, which can be used to
write the debug log output to a file instead of printing it to
stderr, can now contain a name pattern, which is useful for
automated testing and continuous integration systems. The
following format specifiers are supported:
%p: will be replaced with the PID %r: will be replaced with
a random number, which is useful for instance when running
two processes with the same PID but in different containers.
Tools
gst-inspect-1.0 can now list elements by type with the new
--types command-line option, e.g. gst-inspect-1.0 --types=Audio/Encoder
will show a list of audio encoders.
gst-launch-1.0 and gst_parse_launch() have gained a new operator
(:) that allows linking all pads between two elements. This is
useful in cases where the exact number of pads or type of pads
is not known beforehand, such as in the uridecodebin : encodebin
scenario, for example. In this case, multiple links will be
created if the encodebin has multiple profiles compatible with
the output of uridecodebin.
gst-device-monitor-1.0 now shows a gst-launch-1.0 snippet for
each device that shows how to make use of it in a gst-launch-1.0
pipeline string.
GStreamer RTSP server
The RTSP server now also supports Digest authentication in
addition to Basic authentication.
The GstRTSPClient class has gained a pre-*-request signal and
virtual method for each client request type, emitted in the
beginning of each rtsp request. These signals or virtual methods
let the application validate the requests, configure the
media/stream in a certain way and also generate error status
codes in case of an error or a bad request.
GStreamer VAAPI
GstVaapiDisplay now inherits from GstObject, thus the VA display
logging messages are better and tracing the context sharing is
more readable.
When uploading raw images into a VA surfaces now VADeriveImages
are tried fist, improving the upload performance, if it is
possible.
The decoders and the post-processor now can push dmabuf-based
buffers to downstream under certain conditions. For example:
GST_GL_PLATFORM=egl gst-play-1.0 video-sample.mkv
--videosink=glimagesink
Refactored the wrapping of VA surface into gstreamer memory,
adding lock when mapping and unmapping, and many other fixes.
Now vaapidecodebin loads vaapipostproc dynamically. It is
possible to avoid it usage with the environment variable
GST_VAAPI_DISABLE_VPP=1.
Regarding encoders: they have primary rank again, since they
can discover, in run-time, the color formats they can use for
upstream raw buffers and caps renegotiation is now possible.
Also the encoders push encoding info downstream via tags.
About specific encoders: added constant bit-rate encoding mode
for VP8 and H265 encoder handles P010_10LE color format.
Regarding decoders, flush operation has been improved, now the
internal VA encoder is not recreated at each flush. Also there
are several improvements in the handling of H264 and H265
streams.
VAAPI plugins try to create their on GstGL context (when
available) if they cannot find it in the pipeline, to figure
out what type of VA Display they should create.
Regarding vaapisink for X11, if the backend reports that it is
unable to render correctly the current color format, an internal
VA post-processor, is instantiated (if available) and converts
the color format.
GStreamer Editing Services and NLE
Enhanced auto transition behaviour
Fix some races in nlecomposition
Allow building with msvc
Added a UNIX manpage for ges-launch
API changes:
Added ges_deinit (allowing the leak tracer to work properly)
Added ges_layer_get_clips_in_interval Finally hide internal
symbols that should never have been exposed
GStreamer validate
Port gst-validate-launcher to python 3
gst-validate-launcher now checks if blacklisted bugs have been
fixed on bugzilla and errors out if it is the case
Allow building with msvc
Add ability for the launcher to run GStreamer unit tests
Added a way to activate the leaks tracer on our tests and fix
leaks
Make the http server multithreaded
New testsuite for running various test scenarios on the DASH-IF
test vectors
GStreamer Python Bindings
Overrides has been added for IntRange, Int64Range, DoubleRange,
FractionRange, Array and List. This finally enables Python
programmers to fully read and write GstCaps objects.
Build and Dependencies
Meson build files are now disted in tarballs, for jhbuild and
so distro packagers can start using it. Note that the Meson-based
build system is not 100% feature-equivalent with the autotools-based
one yet.
Some plugin filenames have been changed to match the plugin
names: for example the file name of the encoding plugin in
gst-plugins-base containing the encodebin element was
libgstencodebin.so and has been changed to libgstencoding.so.
This affects only a handful of plugins across modules.
Developers who install GStreamer from source and just do make
install after updating the source code, without doing make
uninstall first, will have to manually remove the old installed
plugin files from the installation prefix, or they will get
'Cannot register existing type' critical warnings.
Most of the docbook-based documentation (FAQ, Application
Development Manual, Plugin Writer's Guide, design documents)
has been converted to markdown and moved into a new gst-docs
module. The gtk-doc library API references and the plugins
documentation are still built as part of the source modules
though.
GStreamer core now optionally uses libunwind and libdw to
generate backtraces. This is useful for tracer plugins used
during debugging and development.
There is a new libgstbadallocators-1.0 library in gst-plugins-bad
(which may go away again in future releases once the
GstPhysMemoryAllocator interface API has been validated by more
users).
gst-omx and gstreamer-vaapi modules can now also be built using
the Meson build system.
The qtkitvideosrc element for macOS was removed. The API is
deprecated since 10.9 and it wasn't shipped in the binaries
since a few releases.
Platform-specific improvements Android
androidmedia: add support for VP9 video decoding/encoding and
Opus audio decoding (where supported)
OS/X and iOS
avfvideosrc, which represents an iPhone camera or, on a Mac, a
screencapture session, so far allowed you to select an input
device by device index only. New API adds the ability to select
the position (front or back facing) and device-type (wide angle,
telephoto, etc.). Furthermore, you can now also specify the
orientation (portrait, landscape, etc.) of the videostream.
Bugs fixed in 1.12
More than 635 bugs have been fixed during the development of 1.12.
This list does not include issues that have been cherry-picked into
the stable 1.10 branch and fixed there as well, all fixes that ended
up in the 1.10 branch are also included in 1.12.
This list also does not include issues that have been fixed without
a bug report in bugzilla, so the actual number of fixes is much
higher. Stable 1.12 branch
After the 1.12.0 release there will be several 1.12.x bug-fix
releases which will contain bug fixes which have been deemed suitable
for a stable branch, but no new features or intrusive changes will
be added to a bug-fix release usually. The 1.12.x bug-fix releases
will be made from the git 1.12 branch, which is a stable branch.
1.12.0
1.12.0 was released on 4th May 2017.
1.12.1
The first 1.12 bug-fix release (1.12.1) was released on 20 June
2017. This release only contains bugfixes and it should be safe to
update from 1.12.x. Major bugfixes in 1.12.1
Various fixes for crashes, assertions, deadlocks and memory
leaks Fix for regression when seeking to the end of ASF files
Fix for regression in (raw)videoparse that caused it to omit
video metadata Fix for regression in discoverer that made it
show more streams than actually available Numerous bugfixes to
the adaptive demuxer base class and the DASH demuxer Various
playbin3/urisourcebin related bugfixes Vivante DirectVIV (imx6)
texture uploader works with single-plane (e.g. RGB) video formats
now Intel Media SDK encoder now outputs valid PTS and keyframe
flags OpenJPEG2000 plugin can be loaded again on MacOS and
correctly displays 8 bit RGB images now Fixes to DirectSound
source/sink for high CPU usage and wrong latency/buffer size
calculations gst-libav was updated to ffmpeg n3.3.2 ... and
many, many more!
1.12.2
The second 1.12 bug-fix release (1.12.2) was released on 14 July
2017. This release only contains bugfixes and it should be safe to
update from 1.12.x. Major bugfixes in 1.12.2
Various fixes for crashes, assertions, deadlocks and memory
leaks Regression fix for playback of live HLS streams Regression
fix for crash when playing back a tunneled RTSP stream Regression
fix for playback of RLE animations in MOV containers Regression
fix for RTP GSM payloading producing corrupted output Major
bugfixes to the MXF demuxer, mostly related to seeking and fixes
to the frame reordering handling in the MXF muxer and demuxer
Fix for playback of mono streams on MacOS More fixes for index
handling of ASF containers Various fixes to adaptivedemux, DASH
and HLS demuxers Fix deadlock in gstreamer-editing-services
during class initialization ... and many, many more!
### 1.10.4
The third 1.10 bug-fix release (1.10.4) was released on 23 February 2017.
This release only contains bugfixes and it should be safe to update from 1.10.x.
#### Major bugfixes in 1.10.4
- Various fixes for crashes, assertions, deadlocks and memory leaks on fuzzed
input files and in other situations (CVE-2017-5847, CVE-2017-5848)
- More regression fixes for souphttpsrc redirection tracking
- Regression fix for gmodule on 32 bit Android, which was introduced as part
of the 64 bit Android fix in 1.10.3 and broke the androidmedia plugin
- Various bugfixes for regressions and other problems in the V4L2 plugin
- Fix for 5.1, 6.1 and 7.1 channel layouts for Vorbis
- Fixes for timestamp generation of Android video encoder element
- gst-libav was updated to ffmpeg 3.2.4, fixing a couple of CVEs
- ... and many, many more!
# GStreamer 1.10 Release Notes
**GStreamer 1.10.0 was released on 1st November 2016.**
The GStreamer team is proud to announce a new major feature release in the
stable 1.x API series of your favourite cross-platform multimedia framework!
As always, this release is again packed with new features, bug fixes and other
improvements.
See [https://gstreamer.freedesktop.org/releases/1.10/][latest] for the latest
version of this document.
*Last updated: Tuesday 1 Nov 2016, 15:00 UTC [(log)][gitlog]*
[latest]: https://gstreamer.freedesktop.org/releases/1.10/
[gitlog]: https://cgit.freedesktop.org/gstreamer/www/log/src/htdocs/releases/1.10/release-notes-1.10.md
## Introduction
The GStreamer team is proud to announce a new major feature release in the
stable 1.x API series of your favourite cross-platform multimedia framework!
As always, this release is again packed with new features, bug fixes and other
improvements.
## Highlights
- Several convenience APIs have been added to make developers' lives easier
- A new `GstStream` API provides applications a more meaningful view of the
structure of streams, simplifying the process of dealing with media in
complex container formats
- Experimental `decodebin3` and `playbin3` elements which bring a number of
improvements which were hard to implement within `decodebin` and `playbin`
- A new `parsebin` element to automatically unpack and parse a stream, stopping
just short of decoding
- Experimental new `meson`-based build system, bringing faster build and much
better Windows support (including for building with Visual Studio)
- A new `gst-docs` module has been created, and we are in the process of moving
our documentation to a markdown-based format for easier maintenance and
updates
- A new `gst-examples` module has been create, which contains example
GStreamer applications and is expected to grow with many more examples in
the future
- Various OpenGL and OpenGL|ES-related fixes and improvements for greater
efficiency on desktop and mobile platforms, and Vulkan support on Wayland was
also added
- Extensive improvements to the VAAPI plugins for improved robustness and
efficiency
- Lots of fixes and improvements across the board, spanning RTP/RTSP, V4L2,
Bluetooth, audio conversion, echo cancellation, and more!
## Major new features and changes
### Noteworthy new API, features and other changes
#### Core API additions
##### Receive property change notifications via bus messages
New API was added to receive element property change notifications via
bus messages. So far, applications had to connect a callback to an element's
`notify::property-name` signal via the GObject API, which was inconvenient for
at least two reasons: one had to implement a signal callback function, and that
callback function would usually be called from one of the streaming threads, so
one had to marshal (send) any information gathered or pending requests to the
main application thread which was tedious and error-prone.
Enter [`gst_element_add_property_notify_watch()`][notify-watch] and
[`gst_element_add_property_deep_notify_watch()`][deep-notify-watch] which will
watch for changes of a property on the specified element, either only for this
element or recursively for a whole bin or pipeline. Whenever such a
property change happens, a `GST_MESSAGE_PROPERTY_NOTIFY` message will be posted
on the pipeline bus with details of the element, the property and the new
property value, all of which can be retrieved later from the message in the
application via [`gst_message_parse_property_notify()`][parse-notify]. Unlike
the GstBus watch functions, this API does not rely on a running GLib main loop.
The above can be used to be notified asynchronously of caps changes in the
pipeline, or volume changes on an audio sink element, for example.
[notify-watch]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstElement.html#gst-element-add-property-notify-watch
[deep-notify-watch]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstElement.html#gst-element-add-property-deep-notify-watch
[parse-notify]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstMessage.html#gst-message-parse-property-notify
##### GstBin "deep" element-added and element-removed signals
GstBin has gained `"deep-element-added"` and `"deep-element-removed"` signals
which makes it easier for applications and higher-level plugins to track when
elements are added or removed from a complex pipeline with multiple sub-bins.
`playbin` makes use of this to implement the new `"element-setup"` signal which
can be used to configure elements as they are added to `playbin`, just like the
existing `"source-setup"` signal which can be used to configure the source
element created.
##### Error messages can contain additional structured details
It is often useful to provide additional, structured information in error,
warning or info messages for applications (or higher-level elements) to make
intelligent decisions based on them. To allow this, error, warning and info
messages now have API for adding arbitrary additional information to them
using a `GstStructure`:
[`GST_ELEMENT_ERROR_WITH_DETAILS`][element-error-with-details] and
corresponding API for the other message types.
This is now used e.g. by the new [`GST_ELEMENT_FLOW_ERROR`][element-flow-error]
API to include the actual flow error in the error message, and the
[souphttpsrc element][souphttpsrc-detailed-errors] to provide the HTTP
status code, and the URL (if any) to which a redirection has happened.
[element-error-with-details]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstElement.html#GST-ELEMENT-ERROR-WITH-DETAILS:CAPS
[element-flow-error]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstElement.html#GST-ELEMENT-FLOW-ERROR:CAPS
[souphttpsrc-detailed-errors]: https://cgit.freedesktop.org/gstreamer/gst-plugins-good/tree/ext/soup/gstsouphttpsrc.c?id=60d30db912a1aedd743e66b9dcd2e21d71fbb24f#n1318
##### Redirect messages have official API now
Sometimes, elements need to redirect the current stream URL and tell the
application to proceed with this new URL, possibly using a different
protocol too (thus changing the pipeline configuration). Until now, this was
informally implemented using `ELEMENT` messages on the bus.
Now this has been formalized in the form of a new `GST_MESSAGE_REDIRECT` message.
A new redirect message can be created using [`gst_message_new_redirect()`][new-redirect].
If needed, multiple redirect locations can be specified by calling
[`gst_message_add_redirect_entry()`][add-redirect] to add further redirect
entries, all with metadata, so the application can decide which is
most suitable (e.g. depending on the bitrate tags).
[new-redirect]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstMessage.html#gst-message-new-redirect
[add-redirect]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstMessage.html#gst-message-add-redirect-entry
##### New pad linking convenience functions that automatically create ghost pads
New pad linking convenience functions were added:
[`gst_pad_link_maybe_ghosting()`][pad-maybe-ghost] and
[`gst_pad_link_maybe_ghosting_full()`][pad-maybe-ghost-full] which were
previously internal to GStreamer have now been exposed for general use.
The existing pad link functions will refuse to link pads or elements at
different levels in the pipeline hierarchy, requiring the developer to
create ghost pads where necessary. These new utility functions will
automatically create ghostpads as needed when linking pads at different
levels of the hierarchy (e.g. from an element inside a bin to one that's at
the same level in the hierarchy as the bin, or in another bin).
[pad-maybe-ghost]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstPad.html#gst-pad-link-maybe-ghosting
[pad-maybe-ghost-full]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstPad.html#gst-pad-link-maybe-ghosting-full
##### Miscellaneous
Pad probes: IDLE and BLOCK probes now work slightly differently in pull mode,
so that push and pull mode have opposite scenarios for idle and blocking probes.
In push mode, it will block with some data type and IDLE won't have any data.
In pull mode, it will block _before_ getting a buffer and will be IDLE once some
data has been obtained. ([commit][commit-pad-probes], [bug][bug-pad-probes])
[commit-pad-probes]: https://cgit.freedesktop.org/gstreamer/gstreamer/commit/gst/gstpad.c?id=368ee8a336d0c868d81fdace54b24431a8b48cbf
[bug-pad-probes]: https://bugzilla.gnome.org/show_bug.cgi?id=761211
[`gst_parse_launch_full()`][parse-launch-full] can now be made to return a
`GstBin` instead of a top-level pipeline by passing the new
`GST_PARSE_FLAG_PLACE_IN_BIN` flag.
[parse-launch-full]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/gstreamer-GstParse.html#gst-parse-launch-full
The default GStreamer debug log handler can now be removed before
calling `gst_init()`, so that it will never get installed and won't be active
during initialization.
A new [`STREAM_GROUP_DONE` event][stream-group-done-event] was added. In some
ways it works similar to the `EOS` event in that it can be used to unblock
downstream elements which may be waiting for further data, such as for example
`input-selector`. Unlike `EOS`, further data flow may happen after the
`STREAM_GROUP_DONE` event though (and without the need to flush the pipeline).
This is used to unblock input-selector when switching between streams in
adaptive streaming scenarios (e.g. HLS).
[stream-group-done-event]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstEvent.html#gst-event-new-stream-group-done
The `gst-launch-1.0` command line tool will now print unescaped caps in verbose
mode (enabled by the -v switch).
[`gst_element_call_async()`][call-async] has been added as convenience API for
plugin developers. It is useful for one-shot operations that need to be done
from a thread other than the current streaming thread. It is backed by a
thread-pool that is shared by all elements.
[call-async]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstElement.html#gst-element-call-async
Various race conditions have been fixed around the `GstPoll` API used by e.g.
`GstBus` and `GstBufferPool`. Some of these manifested themselves primarily
on Windows.
`GstAdapter` can now keep track of discontinuities signalled via the `DISCONT`
buffer flag, and has gained [new API][new-adapter-api] to track PTS, DTS and
offset at the last discont. This is useful for plugins implementing advanced
trick mode scenarios.
[new-adapter-api]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer-libs/html/GstAdapter.html#gst-adapter-pts-at-discont
`GstTestClock` gained a new [`"clock-type"` property][clock-type-prop].
[clock-type-prop]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer-libs/html/GstTestClock.html#GstTestClock--clock-type
#### GstStream API for stream announcement and stream selection
New stream listing and stream selection API: new API has been added to
provide high-level abstractions for streams ([`GstStream`][stream-api])
and collections of streams ([`GstStreamCollections`][stream-collection-api]).
##### Stream listing
A [`GstStream`][stream-api] contains all the information pertinent to a stream,
such as stream id, caps, tags, flags and stream type(s); it can represent a
single elementary stream (e.g. audio, video, subtitles, etc.) or a container
stream. This will depend on the context. In a decodebin3/playbin3 one
it will typically be elementary streams that can be selected and unselected.
A [`GstStreamCollection`][stream-collection-api] represents a group of streams
and is used to announce or publish all available streams. A GstStreamCollection
is immutable - once created it won't change. If the available streams change,
e.g. because a new stream appeared or some streams disappeared, a new stream
collection will be published. This new stream collection may contain streams
from the previous collection if those streams persist, or completely new ones.
Stream collections do not yet list all theoretically available streams,
e.g. other available DVD angles or alternative resolutions/bitrate of the same
stream in case of adaptive streaming.
New events and messages have been added to notify or update other elements and
the application about which streams are currently available and/or selected.
This way, we can easily and seamlessly let the application know whenever the
available streams change, as happens frequently with digital television streams
for example. The new system is also more flexible. For example, it is now also
possible for the application to select multiple streams of the same type
(e.g. in a transcoding/transmuxing scenario).
A [`STREAM_COLLECTION` message][stream-collection-msg] is posted on the bus
to inform the parent bin (e.g. `playbin3`, `decodebin3`) and/or the application
about what streams are available, so you no longer have to hunt for this
information at different places. The available information includes number of
streams of each type, caps, tags etc. Bins and/or the application can intercept
the message synchronously to select and deselect streams before any data is
produced - for the case where elements such as the demuxers support the new
stream API, not necessarily in the parsebin compatibility fallback case.
Similarly, there is also a [`STREAM_COLLECTION` event][stream-collection-event]
to inform downstream elements of the available streams. This event can be used
by elements to aggregate streams from multiple inputs into one single collection.
The `STREAM_START` event was extended so that it can also contain a GstStream
object with all information about the current stream, see
[`gst_event_set_stream()`][event-set-stream] and
[`gst_event_parse_stream()`][event-parse-stream].
[`gst_pad_get_stream()`][pad-get-stream] is a new utility function that can be
used to look up the GstStream from the `STREAM_START` sticky event on a pad.
[stream-api]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/gstreamer-GstStream.html
[stream-collection-api]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/gstreamer-GstStreamCollection.html
[stream-collection-msg]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstMessage.html#gst-message-new-stream-collection
[stream-collection-event]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstEvent.html#gst-event-new-stream-collection
[event-set-stream]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstEvent.html#gst-event-set-stream
[event-parse-stream]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstEvent.html#gst-event-parse-stream
[pad-get-stream]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstPad.html#gst-pad-get-stream
##### Stream selection
Once the available streams have been published, streams can be selected via
their stream ID using the new `SELECT_STREAMS` event, which can be created
with [`gst_event_new_select_streams()`][event-select-streams]. The new API
supports selecting multiple streams per stream type. In the future, we may also
implement explicit deselection of streams that will never be used, so
elements can skip these and never expose them or output data for them in the
first place.
The application is then notified of the currently selected streams via the
new `STREAMS_SELECTED` message on the pipeline bus, containing both the current
stream collection as well as the selected streams. This might be posted in
response to the application sending a `SELECT_STREAMS` event or when
`decodebin3` or `playbin3` decide on the streams to be initially selected without
application input.
[event-select-streams]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstEvent.html#gst-event-new-select-streams
##### Further reading
See further below for some notes on the new elements supporting this new
stream API, namely: `decodebin3`, `playbin3` and `parsebin`.
More information about the new API and the new elements can also be found here:
- GStreamer [stream selection design docs][streams-design]
- Edward Hervey's talk ["The new streams API: Design and usage"][streams-talk] ([slides][streams-slides])
- Edward Hervey's talk ["Decodebin3: Dealing with modern playback use cases"][db3-talk] ([slides][db3-slides])
[streams-design]: https://cgit.freedesktop.org/gstreamer/gstreamer/tree/docs/design/part-stream-selection.txt
[streams-talk]: https://gstconf.ubicast.tv/videos/the-new-gststream-api-design-and-usage/
[streams-slides]: https://gstreamer.freedesktop.org/data/events/gstreamer-conference/2016/Edward%20Hervey%20-%20The%20New%20Streams%20API%20Design%20and%20Usage.pdf
[db3-talk]: https://gstconf.ubicast.tv/videos/decodebin3-or-dealing-with-modern-playback-use-cases/
[db3-slides]: https://gstreamer.freedesktop.org/data/events/gstreamer-conference/2015/Edward%20Hervey%20-%20decodebin3.pdf
#### Audio conversion and resampling API
The audio conversion library received a completely new and rewritten audio
resampler, complementing the audio conversion routines moved into the audio
library in the [previous release][release-notes-1.8]. Integrating the resampler
with the other audio conversion library allows us to implement generic
conversion much more efficiently, as format conversion and resampling can now
be done in the same processing loop instead of having to do it in separate
steps (our element implementations do not make use of this yet though).
The new audio resampler library is a combination of some of the best features
of other samplers such as ffmpeg, speex and SRC. It natively supports S16, S32,
F32 and F64 formats and uses optimized x86 and neon assembly for most of its
processing. It also has support for dynamically changing sample rates by incrementally
updating the filter tables using linear or cubic interpolation. According to
some benchmarks, it's one of the fastest and most accurate resamplers around.
The `audioresample` plugin has been ported to the new audio library functions
to make use of the new resampler.
[release-notes-1.8]: https://gstreamer.freedesktop.org/releases/1.8/
#### Support for SMPTE timecodes
Support for SMPTE timecodes was added to the GStreamer video library. This
comes with an abstraction for timecodes, [`GstVideoTimeCode`][video-timecode]
and a [`GstMeta`][video-timecode-meta] that can be placed on video buffers for
carrying the timecode information for each frame. Additionally there is
various API for making handling of timecodes easy and to do various
calculations with them.
A new plugin called [`timecode`][timecode-plugin] was added, that contains an
element called `timecodestamper` for putting the timecode meta on video frames
based on counting the frames and another element called `timecodewait` that
drops all video (and audio) until a specific timecode is reached.
Additionally support was added to the Decklink plugin for including the
timecode information when sending video out or capturing it via SDI, the
`qtmux` element is able to write timecode information into the MOV container,
and the `timeoverlay` element can overlay timecodes on top of the video.
More information can be found in the [talk about timecodes][timecode-talk] at
the GStreamer Conference 2016.
[video-timecode]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-base-libs/html/gst-plugins-base-libs-gstvideo.html#GstVideoTimeCode
[video-timecode-meta]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-base-libs/html/gst-plugins-base-libs-gstvideometa.html#gst-buffer-add-video-time-code-meta
[timecode-plugin]: https://cgit.freedesktop.org/gstreamer/gst-plugins-bad/tree/gst/timecode
[timecode-talk]: https://gstconf.ubicast.tv/videos/smpte-timecodes-in-gstreamer/
#### GStreamer OpenMAX IL plugin
The last gst-omx release, 1.2.0, was in July 2014. It was about time to get
a new one out with all the improvements that have happened in the meantime.
From now on, we will try to release gst-omx together with all other modules.
This release features a lot of bugfixes, improved support for the Raspberry Pi
and in general improved support for zerocopy rendering via EGL and a few minor
new features.
At this point, gst-omx is known to work best on the Raspberry Pi platform but
it is also known to work on various other platforms. Unfortunately, we are
not including configurations for any other platforms, so if you happen to use
gst-omx: please send us patches with your configuration and code changes!
### New Elements
#### decodebin3, playbin3, parsebin (experimental)
This release features new decoding and playback elements as experimental
technology previews: `decodebin3` and `playbin3` will soon supersede the
existing `decodebin` and `playbin` elements. We skipped the number 2 because
it was already used back in the 0.10 days, which might cause confusion.
Experimental technology preview means that everything should work fine already,
but we can't guarantee there won't be minor behavioural changes in the
next cycle. In any case, please test and report any problems back.
Before we go into detail about what these new elements improve, let's look at
the new [`parsebin`][parsebin] element. It works similarly to `decodebin` and
`decodebin3`, only that it stops one step short and does not plug any actual
decoder elements. It will only plug parsers, tag readers, demuxers and
depayloaders. Also note that parsebin does not contain any queueing element.
[`decodebin3`'s][decodebin3] internal architecture is slightly different from
the existing `decodebin` element and fixes many long-standing issues with our
decoding engine. For one, data is now fed into the internal `multiqueue` element
*after* it has been parsed and timestamped, which means that the `multiqueue`
element now has more knowledge and is able to calculate the interleaving of the
various streams, thus minimizing memory requirements and doing away with magic
values for buffering limits that were conceived when videos were 240p or 360p.
Anyone who has tried to play back 4k video streams with decodebin2
will have noticed the limitations of that approach. The improved timestamp
tracking also enables `multiqueue` to keep streams of the same type (audio,
video) aligned better, making sure switching between streams of the same type
is very fast.
Another major improvement in `decodebin3` is that it will no longer decode
streams that are not being used. With the old `decodebin` and `playbin`, when
there were 8 audio streams we would always decode all 8 streams even
if 7 were not actually used. This caused a lot of CPU overhead, which was
particularly problematic on embedded devices. When switching between streams
`decodebin3` will try hard to re-use existing decoders. This is useful when
switching between multiple streams of the same type if they are encoded in the
same format.
Re-using decoders is also useful when the available streams change on the fly,
as might happen with radio streams (chained Oggs), digital television
broadcasts, when adaptive streaming streams change bitrate, or when switching
gaplessly to the next title. In order to guarantee a seamless transition, the
old `decodebin2` would plug a second decoder for the new stream while finishing
up the old stream. With `decodebin3`, this is no longer needed - at least not
when the new and old format are the same. This will be particularly useful
on embedded systems where it is often not possible to run multiple decoders
at the same time, or when tearing down and setting up decoders is fairly
expensive.
`decodebin3` also allows for multiple input streams, not just a single one.
This will be useful, in the future, for gapless playback, or for feeding
multiple external subtitle streams to decodebin/playbin.
`playbin3` uses `decodebin3` internally, and will supercede `playbin`.
It was decided that it would be too risky to make the old `playbin` use the
new `decodebin3` in a backwards-compatible way. The new architecture
makes it awkward, if not impossible, to maintain perfect backwards compatibility
in some aspects, hence `playbin3` was born, and developers can migrate to the
new element and new API at their own pace.
All of these new elements make use of the new `GstStream` API for listing and
selecting streams, as described above. `parsebin` provides backwards
compatibility for demuxers and parsers which do not advertise their streams
using the new API yet (which is most).
The new elements are not entirely feature-complete yet: `playbin3` does not
support so-called decodersinks yet where the data is not decoded inside
GStreamer but passed directly for decoding to the sink. `decodebin3` is missing
the various `autoplug-*` signals to influence which decoders get autoplugged
in which order. We're looking to add back this functionality, but it will probably
be in a different way, with a single unified signal and using GstStream perhaps.
For more information on these new elements, check out Edward Hervey's talk
[*decodebin3 - dealing with modern playback use cases*][db3-talk]
[parsebin]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-base-plugins/html/gst-plugins-base-plugins-parsebin.html
[decodebin3]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-base-plugins/html/gst-plugins-base-plugins-decodebin3.html
[db3-talk]: https://gstconf.ubicast.tv/videos/decodebin3-or-dealing-with-modern-playback-use-cases/
#### LV2 ported from 0.10 and switched from slv2 to lilv2
The LV2 wrapper plugin has been ported to 1.0 and moved from using the
deprecated slv2 library to its replacement liblv2. We support sources and
filter elements. lv2 is short for *Linux Audio Developer's Simple Plugin API
(LADSPA) version 2* and is an open standard for audio plugins which includes
support for audio synthesis (generation), digital signal processing of digital
audio, and MIDI. The new lv2 plugin supersedes the existing LADSPA plugin.
#### WebRTC DSP Plugin for echo-cancellation, gain control and noise suppression
A set of new elements ([webrtcdsp][webrtcdsp], [webrtcechoprobe][webrtcechoprobe])
based on the WebRTC DSP software stack can now be used to improve your audio
voice communication pipelines. They support echo cancellation, gain control,
noise suppression and more. For more details you may read
[Nicolas' blog post][webrtc-blog-post].
[webrtcdsp]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-bad-plugins/html/gst-plugins-bad-plugins-webrtcdsp.html
[webrtcechoprobe]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-bad-plugins/html/gst-plugins-bad-plugins-webrtcechoprobe.html
[webrtc-blog-post]: https://ndufresne.ca/2016/06/gstreamer-echo-canceller/
#### Fraunhofer FDK AAC encoder and decoder
New encoder and decoder elements wrapping the Fraunhofer FDK AAC library have
been added (`fdkaacdec`, `fdkaacdec`). The Fraunhofer FDK AAC encoder is
generally considered to be a very high-quality AAC encoder, but unfortunately
it comes under a non-free license with the option to obtain a paid, commercial
license.
### Noteworthy element features and additions
#### Major RTP and RTSP improvements
- The RTSP server and source element, as well as the RTP jitterbuffer now support
remote clock synchronization according to [RFC7273][https://tools.ietf.org/html/rfc7273].
- Support for application and profile specific RTCP packets was added.
- The H265/HEVC payloader/depayloader is again in sync with the final RFC.
- Seeking stability of the RTSP source and server was improved a lot and
runs stably now, even when doing scrub-seeking.
- The RTSP server received various major bugfixes, including for regressions that
caused the IP/port address pool to not be considered, or NAT hole punching
to not work anymore. [Bugzilla #766612][https://bugzilla.gnome.org/show_bug.cgi?id=766612]
- Various other bugfixes that improve the stability of RTP and RTSP, including
many new unit / integration tests.
#### Improvements to splitmuxsrc and splitmuxsink
- The splitmux element received reliability and error handling improvements,
removing at least one deadlock case. `splitmuxsrc` now stops cleanly at the end
of the segment when handling seeks with a stop time. We fixed a bug with large
amounts of downstream buffering causing incorrect out-of-sequence playback.
- `splitmuxsrc` now has a `"format-location"` signal to directly specify the list
of files to play from.
- `splitmuxsink` can now optionally send force-keyunit events to upstream
elements to allow splitting files more accurately instead of having to wait
for upstream to provide a new keyframe by itself.
#### OpenGL/GLES improvements
##### iOS and macOS (OS/X)
- We now create OpenGL|ES 3.x contexts on iOS by default with a fallback to
OpenGL|ES 2.x if that fails.
- Various zerocopy decoding fixes and enhancements with the
encoding/decoding/capturing elements.
- libdispatch is now used on all Apple platforms instead of GMainLoop, removing
the expensive poll()/pthread_*() overhead.
##### New API
- `GstGLFramebuffer` - for wrapping OpenGL frame buffer objects. It provides
facilities for attaching `GstGLMemory` objects to the necessary attachment
points, binding and unbinding and running a user-supplied function with the
framebuffer bound.
- `GstGLRenderbuffer` (a `GstGLBaseMemory` subclass) - for wrapping OpenGL
render buffer objects that are typically used for depth/stencil buffers or
for color buffers where we don't care about the output.
- `GstGLMemoryEGL` (a `GstGLMemory` subclass) - for combining `EGLImage`s with a GL
texture that replaces `GstEGLImageMemory` bringing the improvements made to the
other `GstGLMemory` implementations. This fixes a performance regression in
zerocopy decoding on the Raspberry Pi when used with an updated gst-omx.
##### Miscellaneous improvements
- `gltestsrc` is now usable on devices/platforms with OpenGL 3.x and OpenGL|ES
and has completed or gained support for new patterns in line with the
existing ones in `videotestsrc`.
- `gldeinterlace` is now available on devices/platforms with OpenGL|ES
implementations.
- The dispmanx backend (used on the Raspberry Pi) now supports the
`gst_video_overlay_set_window_handle()` and
`gst_video_overlay_set_render_rectangle()` functions.
- The `gltransformation` element now correctly transforms mouse coordinates (in
window space) to stream coordinates for both perspective and orthographic
projections.
- The `gltransformation` element now detects if the
`GstVideoAffineTransformationMeta` is supported downstream and will efficiently
pass its transformation downstream. This is a performance improvement as it
results in less processing being required.
- The wayland implementation now uses the multi-threaded safe event-loop API
allowing correct usage in applications that call wayland functions from
multiple threads.
- Support for native 90 degree rotations and horizontal/vertical flips
in `glimagesink`.
#### Vulkan
- The Vulkan elements now work under Wayland and have received numerous
bugfixes.
#### QML elements
- `qmlglsink` video sink now works on more platforms, notably, Windows, Wayland,
and Qt's eglfs (for embedded devices with an OpenGL implementation) including
the Raspberry Pi.
- New element `qmlglsrc` to record a QML scene into a GStreamer pipeline.
#### KMS video sink
- New element `kmssink` to render video using Direct Rendering Manager
(DRM) and Kernel Mode Setting (KMS) subsystems in the Linux
kernel. It is oriented to be used mostly in embedded systems.
#### Wayland video sink
- `waylandsink` now supports the wl_viewporter extension allowing
video scaling and cropping to be delegated to the Wayland
compositor. This extension is also been made optional, so that it can
also work on current compositors that don't support it. It also now has
support for the video meta, allowing zero-copy operations in more
cases.
#### DVB improvements
- `dvbsrc` now has better delivery-system autodetection and several
new parameter sanity-checks to improve its resilience to configuration
omissions and errors. Superfluous polling continues to be trimmed down,
and the debugging output has been made more consistent and precise.
Additionally, the channel-configuration parser now supports the new dvbv5
format, enabling `dvbbasebin` to automatically playback content transmitted
on delivery systems that previously required manual description, like ISDB-T.
#### DASH, HLS and adaptivedemux
- HLS now has support for Alternate Rendition audio and video tracks. Full
support for Alternate Rendition subtitle tracks will be in an upcoming release.
- DASH received support for keyframe-only trick modes if the
`GST_SEEK_FLAG_TRICKMODE_KEY_UNITS` flag is given when seeking. It will
only download keyframes then, which should help with high-speed playback.
Changes to skip over multiple frames based on bandwidth and other metrics
will be added in the near future.
- Lots of reliability fixes around seek handling and bitrate switching.
#### Bluetooth improvements
- The `avdtpsrc` element now supports metadata such as track title, artist
name, and more, which devices can send via AVRCP. These are published as
tags on the pipeline.
- The `a2dpsink` element received some love and was cleaned up so that it
actually works after the initial GStreamer 1.0 port.
#### GStreamer VAAPI
- All the decoders have been split, one plugin feature per codec. So
far, the available ones, depending on the driver, are:
`vaapimpeg2dec`, `vaapih264dec`, `vaapih265dec`, `vaapivc1dec`, `vaapivp8dec`,
`vaapivp9dec` and `vaapijpegdec` (which already was split).
- Improvements when mapping VA surfaces into memory. It now differentiates
between negotiation caps and allocations caps, since the allocation
memory for surfaces may be bigger than one that is going to be
mapped.
- `vaapih265enc` now supports constant bitrate mode (CBR).
- Since several VA drivers are unmaintained, we decide to keep a whitelist
with the va drivers we actually test, which is mostly the i915 and to a lesser
degree gallium from the mesa project. Exporting the environment variable
`GST_VAAPI_ALL_DRIVERS` disables the whitelist.
- Plugin features are registered at run-time, according to their support by
the loaded VA driver. So only the decoders and encoder supported by the
system are registered. Since the driver can change, some dependencies are
tracked to invalidate the GStreamer registry and reload the plugin.
- `dmabuf` importation from upstream has been improved, gaining performance.
- `vaapipostproc` now can negotiate buffer transformations via caps.
- Decoders now can do I-frame only reverse playback. This decodes I-frames
only because the surface pool is smaller than the required by the GOP to show all the
frames.
- The upload of frames onto native GL textures has been optimized too, keeping
a cache of the internal structures for the offered textures by the sink.
#### V4L2 changes
- More pixels formats are now supported
- Decoder is now using `G_SELECTION` instead of the deprecated `G_CROP`
- Decoder now uses the `STOP` command to handle EOS
- Transform element can now scale the pixel aspect ratio
- Colorimetry support has been improved even more
- We now support the `OUTPUT_OVERLAY` type of video node in v4l2sink
#### Miscellaneous
- `multiqueue`'s input pads gained a new `"group-id"` property which
can be used to group input streams. Typically one will assign
different id numbers to audio, video and subtitle streams for
example. This way `multiqueue` can make sure streams of the same
type advance in lockstep if some of the streams are unlinked and the
`"sync-by-running-time"` property is set. This is used in
decodebin3/playbin3 to implement almost-instantaneous stream
switching. The grouping is required because different downstream
paths (audio, video, etc.) may have different buffering/latency
etc. so might be consuming data from multiqueue with a slightly
different phase, and if we track different stream groups separately
we minimize stream switching delays and buffering inside the
`multiqueue`.
- `alsasrc` now supports ALSA drivers without a position for each
channel, this is common in some professional or industrial hardware.
- `libvpx` based decoders (`vp8dec` and `vp9dec`) now create multiple threads on
computers with multiple CPUs automatically.
- `rfbsrc` - used for capturing from a VNC server - has seen a lot of
debugging. It now supports the latest version of the RFB
protocol and uses GIO everywhere.
- `tsdemux` can now read ATSC E-AC-3 streams.
- New `GstVideoDirection` video orientation interface for rotating, flipping
and mirroring video in 90° steps. It is implemented by the `videoflip` and
`glvideoflip` elements currently.
- It is now possible to give `appsrc` a duration in time, and there is now a
non-blocking try-pull API for `appsink` that returns NULL if nothing is
available right now.
- `x264enc` has support now for chroma-site and colorimetry settings
- A new JPEG2000 parser element was added, and the JPEG2000 caps were cleaned
up and gained more information needed in combination with RTP and various
container formats.
- Reverse playback support for `videorate` and `deinterlace` was implemented
- Various improvements everywhere for reverse playback and `KEY_UNITS` trick mode
- New cleaned up `rawaudioparse` and `rawvideoparse` elements that replace the
old `audioparse` and `videoparse` elements. There are compatibility element
factories registered with the old names to allow existing code to continue
to work.
- The Decklink plugin gained support for 10 bit video SMPTE timecodes, and
generally got many bugfixes for various issues.
- New API in `GstPlayer` for setting the multiview mode for stereoscopic
video, setting an HTTP/RTSP user agent and a time offset between audio and
video. In addition to that, there were various bugfixes and the new
gst-examples module contains Android, iOS, GTK+ and Qt example applications.
- `GstBin` has new API for suppressing various `GstElement` or `GstObject`
flags that would otherwise be affected by added/removed child elements. This
new API allows `GstBin` subclasses to handle for themselves if they
should be considered a sink or source element, for example.
- The `subparse` element can handle WebVTT streams now.
- A new `sdpsrc` element was added that can read an SDP from a file, or get it
as a string as property and then sets up an RTP pipeline accordingly.
### Plugin moves
No plugins were moved this cycle. We'll make up for it next cycle, promise!
### Rewritten memory leak tracer
GStreamer has had basic functionality to trace allocation and freeing of
both mini-objects (buffers, events, caps, etc.) and objects in the form of the
internal `GstAllocTrace` tracing system. This API was never exposed in the
1.x API series though. When requested, this would dump a list of objects and
mini-objects at exit time which had still not been freed at that point,
enabled with an environment variable. This subsystem has now been removed
in favour of a new implementation based on the recently-added tracing framework.
Tracing hooks have been added to trace the creation and destruction of
GstObjects and mini-objects, and a new tracer plugin has been written using
those new hooks to track which objects are still live and which are not. If
GStreamer has been compiled against the libunwind library, the new leaks tracer
will remember where objects were allocated from as well. By default the leaks
tracer will simply output a warning if leaks have been detected on `gst_deinit()`.
If the `GST_LEAKS_TRACER_SIG` environment variable is set, the leaks tracer
will also handle the following UNIX signals:
- `SIGUSR1`: log alive objects
- `SIGUSR2`: create a checkpoint and print a list of objects created and
destroyed since the previous checkpoint.
Unfortunately this will not work on Windows due to no signals, however.
If the `GST_LEAKS_TRACER_STACK_TRACE` environment variable is set, the leaks
tracer will also log the creation stack trace of leaked objects. This may
significantly increase memory consumption however.
New `MAY_BE_LEAKED` flags have been added to GstObject and GstMiniObject, so
that objects and mini-objects that are likely to stay around forever can be
flagged and blacklisted from the leak output.
To give the new leak tracer a spin, simply call any GStreamer application such
as `gst-launch-1.0` or `gst-play-1.0` like this:
GST_TRACERS=leaks gst-launch-1.0 videotestsrc num-buffers=10 ! fakesink
If there are any leaks, a warning will be raised at the end.
It is also possible to trace only certain types of objects or mini-objects:
GST_TRACERS="leaks(GstEvent,GstMessage)" gst-launch-1.0 videotestsrc num-buffers=10 ! fakesink
This dedicated leaks tracer is much much faster than valgrind since all code is
executed natively instead of being instrumented. This makes it very suitable
for use on slow machines or embedded devices. It is however limited to certain
types of leaks and won't catch memory leaks when the allocation has been made
via plain old `malloc()` or `g_malloc()` or other means. It will also not trace
non-GstObject GObjects.
The goal is to enable leak tracing on GStreamer's Continuous-Integration and
testing system, both for the regular unit tests (make check) and media tests
(gst-validate), so that accidental leaks in common code paths can be detected
and fixed quickly.
For more information about the new tracer, check out Guillaume Desmottes's
["Tracking Memory Leaks"][leaks-talk] talk or his [blog post][leaks-blog] about
the topic.
[leaks-talk]: https://gstconf.ubicast.tv/videos/tracking-memory-leaks/
[leaks-blog]: https://blog.desmottes.be/?post/2016/06/20/GStreamer-leaks-tracer
### GES and NLE changes
- Clip priorities are now handled by the layers, and the GESTimelineElement
priority property is now deprecated and unused
- Enhanced (de)interlacing support to always use the `deinterlace` element
and expose needed properties to users
- Allow reusing clips children after removing the clip from a layer
- We are now testing many more rendering formats in the gst-validate
test suite, and failures have been fixed.
- Also many bugs have been fixed in this cycle!
### GStreamer validate changes
This cycle has been focused on making GstValidate more than just a validating
tool, but also a tool to help developers debug their GStreamer issues. When
reporting issues, we try to gather as much information as possible and expose
it to end users in a useful way. For an example of such enhancements, check out
Thibault Saunier's [blog post](improving-debugging-gstreamer-validate) about
the new Not Negotiated Error reporting mechanism.
Playbin3 support has been added so we can run validate tests with `playbin3`
instead of playbin.
We are now able to properly communicate between `gst-validate-launcher` and
launched subprocesses with actual IPC between them. That has enabled the test
launcher to handle failing tests specifying the exact expected issue(s).
[improving-debugging-gstreamer-validate]: https://blogs.s-osg.org/improving-debugging-gstreamer-validate/
### gst-libav changes
gst-libav uses the recently released ffmpeg 3.2 now, which brings a lot of
improvements and bugfixes from the ffmpeg team in addition to various new
codec mappings on the GStreamer side and quite a few bugfixes to the GStreamer
integration to make it more robust.
## Build and Dependencies
### Experimental support for Meson as build system
#### Overview
We have have added support for building GStreamer using the
[Meson build system][meson]. This is currently experimental, but should work
fine at least on Linux using the gcc or clang toolchains and on Windows using
the MingW or MSVC toolchains.
Autotools remains the primary build system for the time being, but we hope to
someday replace it and will steadily work towards that goal.
More information about the background and implications of all this and where
we're hoping to go in future with this can be found in [Tim's mail][meson-mail]
to the gstreamer-devel mailing list.
For more information on Meson check out [these videos][meson-videos] and also
the [Meson talk][meson-gstconf] at the GStreamer Conference.
Immediate benefits for Linux users are faster builds and rebuilds. At the time
of writing the Meson build of GStreamer is used by default in GNOME's jhbuild
system.
The Meson build currently still lacks many of the fine-grained configuration
options to enable/disable specific plugins. These will be added back in due
course.
Note: The meson build files are not distributed in the source tarballs, you will
need to get GStreamer from git if you want try it out.
[meson]: http://mesonbuild.com/
[meson-mail]: https://lists.freedesktop.org/archives/gstreamer-devel/2016-September/060231.html
[meson-videos]: http://mesonbuild.com/videos.html
[meson-gstconf]: https://gstconf.ubicast.tv/videos/gstreamer-development-on-windows-ans-faster-builds-everywhere-with-meson/
#### Windows Visual Studio toolchain support
Windows users might appreciate being able to build GStreamer using the MSVC
toolchain, which is not possible using autotools. This means that it will be
possible to debug GStreamer and applications in Visual Studio, for example.
We require VS2015 or newer for this at the moment.
There are two ways to build GStreamer using the MSVC toolchain:
1. Using the MSVC command-line tools (`cl.exe` etc.) via Meson's "ninja" backend.
2. Letting Meson's "vs2015" backend generate Visual Studio project files that
can be opened in Visual Studio and compiled from there.
This is currently only for adventurous souls though. All the bits are in place,
but support for all of this has not been merged into GStreamer's cerbero build
tool yet at the time of writing. This will hopefully happen in the next cycle,
but for now this means that those wishing to compile GStreamer with MSVC will
have to get their hands dirty.
There are also no binary SDK builds using the MSVC toolchain yet.
For more information on GStreamer builds using Meson and the Windows toolchain
check out Nirbheek Chauhan's blog post ["Building and developing GStreamer using Visual Studio"][msvc-blog].
[msvc-blog]: http://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html
### Dependencies
#### gstreamer
libunwind was added as an optional dependency. It is used only for debugging
and tracing purposes.
The `opencv` plugin in gst-plugins-bad can now be built against OpenCV
version 3.1, previously only 2.3-2.5 were supported.
#### gst-plugins-ugly
- `mpeg2dec` now requires at least libmpeg2 0.5.1 (from 2008).
#### gst-plugins-bad
- `gltransformation` now requires at least graphene 1.4.0.
- `lv2` now plugin requires at least lilv 0.16 instead of slv2.
### Packaging notes
Packagers please note that the `gst/gstconfig.h` public header file in the
GStreamer core library moved back from being an architecture dependent include
to being architecture independent, and thus it is no longer installed into
`$(libdir)/gstreamer-1.0/include/gst` but into the normal include directory
where it lives happily ever after with all the other public header files. The
reason for this is that we now check whether the target supports unaligned
memory access based on predefined compiler macros at compile time instead of
checking it at configure time.
## Platform-specific improvements
### Android
#### New universal binaries for all supported ABIs
We now provide a "universal" tarball to allow building apps against all the
architectures currently supported (x86, x86-64, armeabi, armeabi-v7a,
armeabi-v8a). This is needed for building with recent versions of the Android
NDK which defaults to building against all supported ABIs. Use [the Android
player example][android-player-example-build] as a reference for the required
changes.
[android-player-example-build]: https://cgit.freedesktop.org/gstreamer/gst-examples/commit/playback/player/android?id=a5cdde9119f038a1eb365aca20faa9741a38e788
#### Miscellaneous
- New `ahssrc` element that allows reading the hardware sensors, e.g. compass
or accelerometer.
### macOS (OS/X) and iOS
- Support for querying available devices on OS/X via the GstDeviceProvider
API was added.
- It is now possible to create OpenGL|ES 3.x contexts on iOS and use them in
combination with the VideoToolbox based decoder element.
- many OpenGL/GLES improvements, see OpenGL section above
### Windows
- gstconfig.h: Always use dllexport/import on Windows with MSVC
- Miscellaneous fixes to make libs and plugins compile with the MVSC toolchain
- MSVC toolchain support (see Meson section above for more details)
## New Modules for Documentation, Examples, Meson Build
Three new git modules have been added recently:
### gst-docs
This is a new module where we will maintain documentation in the markdown
format.
It contains the former gstreamer.com SDK tutorials which have kindly been made
available by Fluendo under a Creative Commons license. The tutorials have been
reviewed and updated for GStreamer 1.x and will be available as part of the
[official GStreamer documentation][doc] going forward. The old gstreamer.com
site will then be shut down with redirects pointing to the updated tutorials.
Some of the existing docbook XML-formatted documentation from the GStreamer
core module such as the *Application Development Manual* and the *Plugin
Writer's Guide* have been converted to markdown as well and will be maintained
in the gst-docs module in future. They will be removed from the GStreamer core
module in the next cycle.
This is just the beginning. Our goal is to provide a more cohesive documentation
experience for our users going forward, and easier to create and maintain
documentation for developers. There is a lot more work to do, get in touch if
you want to help out.
If you encounter any problems or spot any omissions or outdated content in the
new documentation, please [file a bug in bugzilla][doc-bug] to let us know.
We will probably release gst-docs as a separate tarball for distributions to
package in the next cycle.
[doc]: http://gstreamer.freedesktop.org/documentation/
[doc-bug]: https://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer&component=documentation
### gst-examples
A new [module][examples-git] has been added for examples. It does not contain
much yet, currently it only contains a small [http-launch][http-launch] utility
that serves a pipeline over http as well as various [GstPlayer playback frontends][puis]
for Android, iOS, Gtk+ and Qt.
More examples will be added over time. The examples in this repository should
be more useful and more substantial than most of the examples we ship as part
of our other modules, and also written in a way that makes them good example
code. If you have ideas for examples, let us know.
No decision has been made yet if this module will be released and/or packaged.
It probably makes sense to do so though.
[examples-git]: https://cgit.freedesktop.org/gstreamer/gst-examples/tree/
[http-launch]: https://cgit.freedesktop.org/gstreamer/gst-examples/tree/network/http-launch/
[puis]: https://cgit.freedesktop.org/gstreamer/gst-examples/tree/playback/player
### gst-build
[gst-build][gst-build-git] is a new meta module to build GStreamer using the
new Meson build system. This module is not required to build GStreamer with
Meson, it is merely for convenience and aims to provide a development setup
similar to the existing `gst-uninstalled` setup.
gst-build makes use of Meson's [subproject feature][meson-subprojects] and sets
up the various GStreamer modules as subprojects, so they can all be updated and
built in parallel.
This module is still very new and highly experimental. It should work at least
on Linux and Windows (OS/X needs some build fixes). Let us know of any issues
you encounter by popping into the `#gstreamer` IRC channel or by
[filing a bug][gst-build-bug].
This module will probably not be released or packaged (does not really make sense).
[gst-build-git]: https://cgit.freedesktop.org/gstreamer/gst-build/tree/
[gst-build-bug]: https://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer&component=gst-build
[meson-subprojects]: https://github.com/mesonbuild/meson/wiki/Subprojects
## Contributors
Aaron Boxer, Aleix Conchillo Flaqué, Alessandro Decina, Alexandru Băluț, Alex
Ashley, Alex-P. Natsios, Alistair Buxton, Allen Zhang, Andreas Naumann, Andrew
Eikum, Andy Devar, Anthony G. Basile, Arjen Veenhuizen, Arnaud Vrac, Artem
Martynovich, Arun Raghavan, Aurélien Zanelli, Barun Kumar Singh, Bernhard
Miller, Brad Lackey, Branko Subasic, Carlos Garcia Campos, Carlos Rafael
Giani, Christoffer Stengren, Daiki Ueno, Damian Ziobro, Danilo Cesar Lemes de
Paula, David Buchmann, Dimitrios Katsaros, Duncan Palmer, Edward Hervey,
Emmanuel Poitier, Enrico Jorns, Enrique Ocaña González, Fabrice Bellet,
Florian Zwoch, Florin Apostol, Francisco Velazquez, Frédéric Bertolus, Fredrik
Fornwall, Gaurav Gupta, George Kiagiadakis, Georg Lippitsch, Göran Jönsson,
Graham Leggett, Gregoire Gentil, Guillaume Desmottes, Gwang Yoon Hwang, Haakon
Sporsheim, Haihua Hu, Havard Graff, Heinrich Fink, Hoonhee Lee, Hyunjun Ko,
Iain Lane, Ian, Ian Jamison, Jagyum Koo, Jake Foytik, Jakub Adam, Jan
Alexander Steffens (heftig), Jan Schmidt, Javier Martinez Canillas, Jerome
Laheurte, Jesper Larsen, Jie Jiang, Jihae Yi, Jimmy Ohn, Jinwoo Ahn, Joakim
Johansson, Joan Pau Beltran, Jonas Holmberg, Jonathan Matthew, Jonathan Roy,
Josep Torra, Julien Isorce, Jun Ji, Jürgen Slowack, Justin Kim, Kazunori
Kobayashi, Kieran Bingham, Kipp Cannon, Koop Mast, Kouhei Sutou, Kseniia, Kyle
Schwarz, Kyungyong Kim, Linus Svensson, Luis de Bethencourt, Marcin Kolny,
Marcin Lewandowski, Marianna Smidth Buschle, Mario Sanchez Prada, Mark
Combellack, Mark Nauwelaerts, Martin Kelly, Matej Knopp, Mathieu Duponchelle,
Mats Lindestam, Matthew Gruenke, Matthew Waters, Michael Olbrich, Michal Lazo,
Miguel París Díaz, Mikhail Fludkov, Minjae Kim, Mohan R, Munez, Nicola Murino,
Nicolas Dufresne, Nicolas Huet, Nikita Bobkov, Nirbheek Chauhan, Olivier
Crête, Paolo Pettinato, Patricia Muscalu, Paulo Neves, Peng Liu, Peter
Seiderer, Philippe Normand, Philippe Renon, Philipp Zabel, Pierre Lamot, Piotr
Drąg, Prashant Gotarne, Raffaele Rossi, Ray Strode, Reynaldo H. Verdejo
Pinochet, Santiago Carot-Nemesio, Scott D Phillips, Sebastian Dröge, Sebastian
Rasmussen, Sergei Saveliev, Sergey Borovkov, Sergey Mamonov, Sergio Torres
Soldado, Seungha Yang, sezero, Song Bing, Sreerenj Balachandran, Stefan Sauer,
Stephen, Steven Hoving, Stian Selnes, Thiago Santos, Thibault Saunier, Thijs
Vermeir, Thomas Bluemel, Thomas Jones, Thomas Klausner, Thomas Scheuermann,
Tim-Philipp Müller, Ting-Wei Lan, Tom Schoonjans, Ursula Maplehurst, Vanessa
Chipirras Navalon, Víctor Manuel Jáquez Leal, Vincent Penquerc'h, Vineeth TM,
Vivia Nikolaidou, Vootele Vesterblom, Wang Xin-yu (王昕宇), William Manley,
Wim Taymans, Wonchul Lee, Xabier Rodriguez Calvar, Xavier Claessens, xlazom00,
Yann Jouanin, Zaheer Abbas Merali
... and many others who have contributed bug reports, translations, sent
suggestions or helped testing.
## Bugs fixed in 1.10
More than [750 bugs][bugs-fixed-in-1.10] have been fixed during
the development of 1.10.
This list does not include issues that have been cherry-picked into the
stable 1.8 branch and fixed there as well, all fixes that ended up in the
1.8 branch are also included in 1.10.
This list also does not include issues that have been fixed without a bug
report in bugzilla, so the actual number of fixes is much higher.
[bugs-fixed-in-1.10]: https://bugzilla.gnome.org/buglist.cgi?bug_status=RESOLVED&bug_status=VERIFIED&classification=Platform&limit=0&list_id=164074&order=bug_id&product=GStreamer&query_format=advanced&resolution=FIXED&target_milestone=1.8.1&target_milestone=1.8.2&target_milestone=1.8.3&target_milestone=1.8.4&target_milestone=1.9.1&target_milestone=1.9.2&target_milestone=1.9.90&target_milestone=1.10.0
## Stable 1.10 branch
After the 1.10.0 release there will be several 1.10.x bug-fix releases which
will contain bug fixes which have been deemed suitable for a stable branch,
but no new features or intrusive changes will be added to a bug-fix release
usually. The 1.10.x bug-fix releases will be made from the git 1.10 branch,
which is a stable branch.
### 1.10.0
1.10.0 was released on 1st November 2016.
## Known Issues
- iOS builds with iOS 6 SDK and old C++ STL. You need to select iOS 6 instead
of 7 or 8 in your projects settings to be able to link applications.
[Bug #766366](https://bugzilla.gnome.org/show_bug.cgi?id=766366)
- Code signing for Apple platforms has some problems currently, requiring
manual work to get your application signed. [Bug #771860](https://bugzilla.gnome.org/show_bug.cgi?id=771860)
- Building applications with Android NDK r13 on Windows does not work. Other
platforms and earlier/later versions of the NDK are not affected.
[Bug #772842](https://bugzilla.gnome.org/show_bug.cgi?id=772842)
- The new leaks tracer may deadlock the application (or exhibit other undefined
behaviour) when `SIGUSR` handling is enabled via the `GST_LEAKS_TRACER_SIG`
environment variable. [Bug #770373](https://bugzilla.gnome.org/show_bug.cgi?id=770373)
- vp8enc crashes on 32 bit Windows, but was working fine in 1.6. 64 bit Windows is unaffected.
[Bug #763663](https://bugzilla.gnome.org/show_bug.cgi?id=763663)
## Schedule for 1.12
Our next major feature release will be 1.12, and 1.11 will be the unstable
development version leading up to the stable 1.12 release. The development
of 1.11/1.12 will happen in the git master branch.
The plan for the 1.12 development cycle is yet to be confirmed, but it is
expected that feature freeze will be around early/mid-January,
followed by several 1.11 pre-releases and the new 1.12 stable release
in March.
1.12 will be backwards-compatible to the stable 1.10, 1.8, 1.6, 1.4, 1.2 and
1.0 release series.
- - -
*These release notes have been prepared by Olivier Crête, Sebastian Dröge,
Nicolas Dufresne, Edward Hervey, Víctor Manuel Jáquez Leal, Tim-Philipp
Müller, Reynaldo H. Verdejo Pinochet, Arun Raghavan, Thibault Saunier,
Jan Schmidt, Wim Taymans, Matthew Waters*
*License: [CC BY-SA 4.0](http://creativecommons.org/licenses/by-sa/4.0/)*
1.8.3
The third 1.8 bug-fix release (1.8.3) was released on 19 August 2016. This release only contains bugfixes and it should be safe to update from 1.8.x.
Major bugfixes in 1.8.3
Fix Android build scripts on OS X and Windows
Fix stepping in PAUSED state in certain circumstances
Fix jackaudiosink hang when exiting
Fix udpsrc receiving multicast packets not only from the selected multicast group
Fix unnecessary decoding of unselected streams in GES
Fix (multi)udpsink randomly not sending to clients
Fix ALL_BOTH probes not considering EVENT_FLUSH
Fix average input rate calculations in queue2
Fix various locking issues causing deadlock in adaptivedemux
Fix gst-libav encoders to correctly produce codec_data in caps
Add Wayland, Windows and Rasberry Pi support to the QML GL video sink
Add support for building with OpenH264 1.6
Add support for controlling deinterlacing in GES video sources
... and many, many more!
For a full list of bugfixes see Bugzilla. Note that this is not the full list of changes. For the full list of changes please refer to the GIT logs or ChangeLogs of the particular modules.
Known Issues
gst-rtsp-server does not take address pool configuration into account for sending unicast UDP. Bugzilla #766612
vp8enc crashes on 32 bit Windows, but was working fine in 1.6. 64 bit Windows is unaffected. Bugzilla #763663
Switch gst-plugin1-libav from ffmpeg2 to ffmpeg3.
1.8.1
The first 1.8 bug-fix release (1.8.1) was released on 20 April 2016.
This release only contains bugfixes and it should be safe to update
from 1.8.0.
Major bugfixes in 1.8.1
Fix app compilation with Android NDK r11 and newer
Fix compilation of nvenc plugin against latest NVIDIA SDK 6.0
Fix regression in avdeinterlace
Fix memory corruption in scaletempo element with S16 input
Fix glitches at the start with all audio sinks except for pulsesink
Fix regression with encrypted HLS streams
Fix automatic multithreaded decoding of VP8/9 video
Fix deadlock in HTTP adaptive streams when scrub-seeking
Fix regression in RTSP source with SRTP
Add support for SRTP rollover counters in the RTSP source
Add support for HiDPI ("Retina") screens in caopengllayersink
... and many more!
GStreamer 1.8.0 was released on 24 March 2016.
The GStreamer team is proud to announce a new major feature release
in the stable 1.x API series of your favourite cross-platform
multimedia framework!
As always, this release is again packed with new features, bug fixes
and other improvements.
See https://gstreamer.freedesktop.org/releases/1.8/ for the latest
version of this document.
Highlights
Hardware-accelerated zero-copy video decoding on Android
New video capture source for Android using the android.hardware.Camera
API
Windows Media reverse playback support (ASF/WMV/WMA)
New tracing system provides support for more sophisticated
debugging tools
New high-level GstPlayer playback convenience API
Initial support for the new Vulkan API, see Matthew Waters'
blog post for more details
Improved Opus audio codec support: Support for more than two
channels; MPEG-TS demuxer/muxer can now handle Opus; sample-accurate
encoding/decoding/transmuxing with Ogg, Matroska, ISOBMFF
(Quicktime/MP4), and MPEG-TS as container; new codec utility
functions for Opus header and caps handling in pbutils library.
The Opus encoder/decoder elements were also moved to gst-plugins-base
(from -bad), and the opus RTP depayloader/payloader to -good.
GStreamer VAAPI module now released and maintained as part of
the GStreamer project
Asset proxy support in the GStreamer Editing Services
Major bugfixes
Crashes in gst-libav with sinks that did not provide a buffer pool but supported video metadata were fixed. This affected d3dvideosink and some 3rd party sinks. Also related fixes for crashes when a downstream buffer pool failed allocation.
Big GL performance improvement on iOS by a factor of 2 by using Apple's sync extension.
Deadlocks in the DirectSound elements on Windows, and the behaviour of its mute property were fixed.
The Direct3D video sink does not crash anymore when minimizing the window
The library soname generation on Android >= 6.0 was fixed, which previously caused GStreamer to fail to load there.
File related elements have large-file (>2GB) support on Android now.
gst-libav was updated to ffmpeg 2.8.3.
Deserialization of custom events in the GDP depayloader was fixed.
Missing OpenGL context initialization in the Qt/QML video sink was fixed in certain situations.
Interoperability with some broken RTSP servers using HTTP tunnel was improved.
Various compilation fixes for Windows.
Various smaller memory leak and other fixes in different places.
and many, many more
GStreamer 1.6.1 Release Notes
The GStreamer team is proud to announce the first bugfix release in the stable 1.6 release series of your favourite cross-platform multimedia framework!
This release only contains bugfixes and it is safe to update from 1.6.0. For a full list of bugfixes see Bugzilla.
See http://gstreamer.freedesktop.org/releases/1.6/ for the latest version of this document.
Last updated: Friday 30 October 2015, 14:00 UTC (log)
Major bugfixes
Crashes in the gst-libav encoders were fixed
More DASH-IF test streams are working now
Live DASH, HLS and MS SmoothStreaming streams work more reliable and other fixes for the adaptive streaming protocols
Reverse playback works with scaletempo to keep the audio pitch
Correct stream-time is reported for negative applied_rate
SRTP packet validation during decoding does not reject valid packets anymore
Fixes for audioaggregator and aggregator to start producing output at the right time, and e.g. not outputting lots of silence in the beginning
gst-libav's internal ffmpeg snapshot was updated to 2.8.1
cerbero has support for Mac OS X 10.11 (El Capitan)
Various memory leaks were fixed, including major leaks in playbin, playsink and decodebin
Various GObject-Introspection annotation fixes for bindings
and many, many more
GStreamer 1.6 Release Notes
The GStreamer team is proud to announce a new major feature release in the stable 1.x API series of your favourite cross-platform multimedia framework!
This release has been in the works for more than a year and is packed with new features, bug fixes and other improvements.
See http://gstreamer.freedesktop.org/releases/1.6/ for the latest version of this document.
Highlights
Stereoscopic 3D and multiview video support
Trick mode API for key-frame only fast-forward/fast-reverse playback etc.
Improved DTS (decoding timestamp) vs. PTS (presentation timestamp) handling to account for negative DTS
New GstVideoConverter API for more optimised and more correct conversion of raw video frames between all supported formats, with rescaling
v4l2src now supports renegotiation
v4l2transform can now do scaling
V4L2 Element now report Colorimetry properly
Easier chunked recording of MP4, Matroska, Ogg, MPEG-TS: new splitmuxsink and multifilesink improvements
Content Protection signalling API and Common Encryption (CENC) support for DASH/MP4
Many adaptive streaming (DASH, HLS and MSS) improvements
New PTP and NTP network client clocks and better remote clock tracking stability
High-quality text subtitle overlay at display resolutions with glimagesink or gtkglsink
RECORD support for the GStreamer RTSP Server
Retransmissions (RTX) support in RTSP server and client
RTSP seeking support in client and server has been fixed
RTCP scheduling improvements and reduced size RTCP support
MP4/MOV muxer acquired a new "robust" mode of operation which attempts to keep the output file in a valid state at all times
Live mixing support in aggregator, audiomixer and compositor was improved a lot
compositor now also supports rescaling of inputs streams on the fly
New audiointerleave element with proper input synchronisation and live input support
Blackmagic Design DeckLink capture and playback card support was rewritten from scratch; 2k/4k support; mode sensing
KLV metadata support in RTP and MPEG-TS
H.265 video encoder (x265), decoders (libav, libde265) and RTP payloader and depayloaders
New DTLS plugin and SRTP/DTLS support
OpenGL3 support, multiple contexts and context propagation, 3D video, transfer/conversion separation, subtitle blending
New OpenGL-based QML video sink, Gtk GL video sink, CoreAnimation CAOpenGLLayerSink video sink
gst-libav switched to ffmpeg as libav-provider, gains support for 3D/multiview video, trick modes, and the CAVS codec
GstHarness API for unit tests
gst-editing-services got a completely new ges-launch-1.0 interface, improved mixing support and integration into gst-validate
gnonlin has been deprecated in favor of nle (Non Linear Engine) in gst-editing-services
gst-validate has a new plugin system, an extensive default testsuite, support for concurrent test runs and valgrind support
cerbero build tool for SDK binary packages gains new 'bundle-source' command
Various improvements to the Android, iOS, OS X and Windows platform support
Full log at
http://gstreamer.freedesktop.org/releases/1.6/
GStreamer core:
* 736969 : queue2: dead lock when buffering
* 738092 : basesink: clamp reported position based on direction
* 740001 : task: race condition when pausing and stopping
GStreamer Plugins Base:
* 741420 : video pools: should update size in configuration after applying alignment
* 715050 : add typefinder for audio/x-audible
* 739544 : tcp: Add test and fix memory leak in tcp elements
* 739840 : typefind should recognize Apple Core Audio Format (CAF)
* 740556 : videodecoder: don't complain when DTS != PTS on keyframes
* 740675 : playsink: continues playback, reset mute property
* 740730 : rtspconnection: don't remove child source if parent source is already destroyed
* 740853 : audiodecoder: Push pending events before sending EOS.
* 740952 : alsa: NetBSD fixes
* 741045 : audiorate can can lose timestamp precision in some cases
* 741198 : playbin: leaks GstPads
GStreamer Plugins Good:
* 711437 : apev2mux: should not put APEv2 tags at beginning of WavPack files
* 726194 : v4l2src does not cope well when a capture card is sometimes interlaced, sometimes progressive at the same resolution
* 736397 : flvdemux: Per-stream resyncing behavior causes A/V-desyncs
* 737603 : v4l2bufferpool: set buffer interlace flags when field is V4L2_FIELD_INTERLACED
* 739476 : vpx: fails to build against libvpx from git
* 739722 : matroskamux: Thread safe register GstMatroskamuxPad
* 739789 : v4l2allocator: fix error message if allocator is already active
* 739791 : v4l2bufferpool: unref pool when v4l2_allocator_new() fails
* 739792 : v4l2allocator: fix gst_v4l2_allocator_stop prototype
* 739996 : videomixer: Drops a lot of frames, if one of the sources is live
* 740040 : v4l2src: Fails in presence of V4L2_BUF_FLAG_ERROR
* 740392 : rtspsrc: mikey base64 decoded key-mgmt leak
* 740407 : qtmux limits capture to 4096x4096
* 740633 : v4l2src: RW io-mode is broken
* 740636 : v4l2src: framerate is not always set on driver
* 740671 : aspectratiocrop: crop needs to be reset when video size changes
* 740905 : v4l2: still has 1 include to linux/videodev.h
* 741271 : rtph264pay: Buffer leak in H.264 payloader when using SPS/PPS
* 741381 : rtph264pay: Race condition may cause crash when going from PAUSED- > READY
* 741407 : deinterlace: in query_caps return only supported formats if filter is interlaced
* 737579 : v4l2object: set colorspace for output devices
* 739754 : v4l2bufferpool: Should validate that all memories are writeable before queueing back
GStreamer Plugins Bad:
* 722764 : rawparse: fix SEEKING query handling
* 729768 : mpegtsbase: Raise limit to read more bytes initially to find PCR
* 739152 : gl/cocoa: build with GNUStep fails
* 740191 : dvbbasesink: segfaults on 32-bit (rpi)
* 740201 : gl/cocoa: Does not compile on OSX < 10.7 anymore
* 740451 : srtpdec: leaks rtp/rtcp sink events
* 740953 : configure.ac: unportable test(1) comparison operator
* 741321 : opusparse: fix header parsing esp. of encoded output of libopus
GStreamer RTSP Server:
* 739481 : rtsp-stream: leaks srtp decoder when leaving rtpbin
GStreamer Plugins Base:
* 736969 : queue2: dead lock when buffering
* 737055 : audiosink: Setting URI on playbin at about-to-finish when playing AAC and using an alsasink causes delayed playback
* 737706 : videoencoder: release frame in finish_frame when no output state is configured
* 737742 : vorbisdec: Crashes when handling more than 8 channels
* 737752 : rtsp-client: crash when cleaning up session
* 738064 : decodebin: The “drained” signal is emitted multiple times, first time too early (~1s)
GStreamer Plugins Good:
* 726329 : vp8enc: Add support for caps renegotiation
* 736071 : audiobasesink: Don't hold object lock while calling into other objects like the clock
* 737735 : wavenc writes broken file if caps are set
* 737739 : souphttpclientsink: Restarting after error results in buffers being queued forever
* 737761 : aacparse: memory leak when converting to adts
* 737771 : souphttpclientsink: Stream header buffer lifetime assumptions are incorrect
* 737886 : equalizer: crash when changing equalizer settings during playback
* 738102 : v4l2bufferpool: cleanly handle streamon failure for output device
* 738152 : v4l2sink: leak with output device
* 738297 : DTMF telephone-event timestamps are bogus
* 738722 : rtpmux returns EMPTY caps when query'ing
* 738793 : speex: encoder/decoder segfault when resetting multiple times
* 739430 : rtspsrc: mikey related memory leaks
GStreamer Plugins Bad:
* 732239 : h264parse: expose parsed profiles to downstream
* 733510 : gltransformation produced black screen
* 734156 : androidmedia: doesn't calculate framesize for COLOR_FormatYUV420Planar correctly
* 736319 : dashdemux: mark first buffer as discont after restarting a download task
* 737186 : h264parse: Return flushing if we get chained while being set to READY
* 737569 : tsdemux: valid data is discarded if PES start packet is the first packet after discontinuity
* 737658 : fluiddec: segmentation fault when used with fakesrc
* 737724 : vc1parse: unref caps when it is empty in renegotiate()
* 738067 : gl: Downloading YUY2 is broken and creates blocky artefacts
* 738223 : fluiddec: leaks memory in gst_fluid_dec_change_state()
* 738230 : vc1parser: fix level value for simple/main profile
* 738243 : vc1parse: fix framesize when input is frame-layer
* 738291 : fluiddec: leaks incoming caps event
* 738449 : vc1parse: just assume none header-format when no codec_data is present
* 738519 : vc1parse: parse frame header when stream format is ASF/raw for simple/main profile
* 738532 : vc1parse: select caps according to wmv format at negotiation
* 738674 : rtmpsink: leaking URI string
* 738695 : mpegtsbase: do not remove programs on EOS
* 738696 : hlsdemux: send missing stream start
* 739277 : GstGLFilter propose allocation pass uninitialized size to gst_query_add_allocation_pool
* 739348 : configure.ac: auto decision to include GL library fails
* 739368 : gl: small memory leak in gl shader
* 739374 : h264parse: sets srccaps too often
Note that this announcement includes everything from 1.4.2 too, which was
never officially released as some critical bugs were found.
Bug reports fixed in this release:
GStreamer core:
* 734412 : multiqueue: The buffering logic can lead to a pipeline stuck in PAUSED forever
* 735574 : buffer: do not touch memory tag flag when copying buffer flags
* 736295 : multiqueue: posts buffering message holding lock
* 736424 : query: add annotations to gst_query_set_nth_allocation_pool
* 736680 : basesrc: possible pool and allocator leak in prepare_allocation()
* 736736 : query: add annotations to gst_query_add_allocation_pool
* 736813 : typefindelement leaks sticky events upon flush_stop
* 737102 : queue: Do not hold GST_QUEUE_LOCK while posting ERROR messages
* 737133 : Missing gstconfig.h include
GStreamer Plugins Base:
* 732908 : audioresample: skips samples unless input buffers have correct size
* 727255 : playbin: filter out buffering messages when switching URI and the previous URI is still playing
* 729811 : output-selector: test example in gstreamer plugin base is giving " Internal data flow error "
* 735569 : rtspconnection: Crash due to no protection of watchs readsrc
* 735748 : playbin: can't play an avi file in totem with audio-filter=scaletempo
* 735800 : textoverlay: Two textoverlay in sequence fail to negotiate (regression)
* 735844 : basetextoverlay/pango: overlay negotiation fails when it should not
* 735952 : videorate: GstStructure refcount critical message
* 736071 : audiobasesink: Don't hold object lock while calling into other objects like the clock
* 736118 : videofilter: The buffer is not writable in transform_frame_ip
* 736739 : audiocdsrc: do not leak uid after parsing TOC select event
* 736779 : typefind: h265 IRAP picture always true
* 736788 : audiodecoder: leaks events
* 736796 : videoencoder: do not leak events when flushing them
* 736861 : playbin: Reference count bug
* 736679 : videodecoder: do not leak pool and allocator in error case
* 736969 : queue2: dead lock when buffering
* 709868 : Keep still meaningfull pending events on FLUSH_STOP
GStreamer Plugins Good:
* 719359 : vp8dec: Doesn't handle changes in resolution
* 733607 : v4l2transform: Rank should have been NONE
* 734266 : vp8dec: fails when input format changes
* 735520 : aacparse: skip valid ADTS/LOAS frames
* 735804 : smpte: Creates incomplete raw video caps
* 735833 : matroskademux: parse error at end of file
* 735859 : videomixer: Dynamically changing the FPS leads to an incorrect buffer time
* 736192 : avidemux: some AVI files crash (regression)
* 736266 : wavparse: error in reading adtl chunk
* 736384 : v4l2sink: pool not unreffed after usage
* 736670 : v4l2allocator: O_CLOEXEC needs _GNU_SOURCE
* 736805 : multipartdemux leaks new stream events
* 736807 : rtpbin: pad leaked in error case
* 735660 : v4l2: fix new v4l2 code not working with certain devices (regression)
* 736944 : videoscale: vs_image_scale_4tap_Y offset should use stride to calculate buffer offset
* 737219 : flacparse: When generating headers, leave total_samples at 0 if upstream duration query returns GST_CLOCK_TIME_NONE.
GStreamer Plugins Bad:
* 735861 : dataurisrc: make src thread safe
* 736090 : aiffparse: duplicate else-if condition
* 736390 : tsdemux: plug for a memory leak
* 736426 : mpegpsmux: memory leak with h264/avc stream
* 736474 : vc1parse: malformed sequence layer header and STRUCT_C
* 736490 : tsdemux: fix overflow of packet_length field of PESHeader
* 736729 : glmixer: do not leak pool in error cases
* 736730 : gltestsrc: do not leak pool in error cases
* 736731 : openni2src: do not leak pool
* 736732 : glfilter: do not leak pool in error cases
* 736733 : vdpdecoder: do not leak pool
* 736735 : waylandsink: do not leak buffer pool in error case
* 736750 : vc1parse: fix sequence-layer/frame-layer endianness
* 736871 : codecparsers_vc1: sequence-layer parser is broken due to endianness issue.
* 736919 : hlsdemux: attempt to unlock an already unlocked mutex in gst_hls_demux_change_playlist
* 736951 : vc1parse: initialize sent_codec_tag before using it
GStreamer Plugins Ugly:
* 736060 : asfdemux: add GUID for ASF_Metadata_Library_Object
GStreamer libav Plugins:
* 734661 : avviddec: After draining frames, flush the libav decoder
* 736515 : avviddec: keep draining buffers from libav until libav says so
* 737144 : avauddec: keep draining buffers from libav until libav says so
GStreamer RTSP Server:
* 735570 : Race condition between close() and handle_tunnel() causing crash
* 736017 : Sequence number is not monotonic after PAUSE command
This is GStreamer Ugly Plugins 1.4.0
Changes since 1.2:
New API:
• GstMessageType has GST_MESSAGE_EXTENDED added. All types before
that can be used together as a flags type as before, but from
that message onwards the types are just counted incrementally.
This was necessary to be able to add more message types.
In 2.0 GstMessageType will just become an enum and not a flags
type anymore.
• GstDeviceMonitor for device probing, e.g. to list all available
audio or video capture devices. This is the replacement for
GstPropertyProbe from 0.10.
• Events accumulate the running-time offset now when travelling
through pads, as set by the gst_pad_set_offset() function. This
allows to compensate for this in the QOS event for example.
• GstBuffer has a new flag "tag-memory" that is set automatically
when memory is added or removed to a buffer. This allows buffer
pools to detect if they can recycle a buffer or need to reset
it first.
• GstToc has new API to mark GstTocEntries as loops.
• A not-authorized resource error has been defined to notify
applications that accessing the resource has failed because
of missing authorization and to distinguish this case from others.
This change is actually already in 1.2.4.
• GstPad has a new flag "accept-intersect", that will let the default
ACCEPT_CAPS query handler do an intersection instead of subset check.
This is interesting for parser elements that can handle incomplete
caps.
• GstCollectPads has support for flushing and a default handler for
SEEK events now.
• New GstFlowAggregator helper object that simplifies handling of
flow returns in elements with multiple source pads. Additionally
GstPad now always stores the last flow return and provides an
API to retrieve it.
• GstSegment has new API to offset the running time by a specific
value and this is used in GstPad to allow positive and negative
offsets in gst_pad_set_offset() in all situations.
• Support for h265/HEVC and VP8 has been added to the codec utils and codec
parsers library, and was integrated into various elements.
• API for adjusting the TLS validation of RTSP connection has been added.
• The RTSP and SDP library has MIKEY (RFC 3830) support now, and
there is API to distinguish between the different RTSP profiles.
• API to access RTP time information and statistics.
• Support for auxiliary streams was added to rtpbin.
• Support for tiled, raw video formats has been added.
• GstVideoDecoder and GstAudioDecoder have API to help aggregating tag
events and merge custom tags into them consistently.
• GstBufferPool has support for flushing now.
• playbin/playsink has support for application provided audio and video
filters.
• GstDiscoverer has new and simplified API to get details about missing
plugins and information to pass to the plugin installer.
• The GL library was merged from gst-plugins-gl to gst-plugins-bad,
providing a generic infrastructure for handling GL inside GStreamer
pipelines and a plugin with some elements using these, especially
a video sink. Supported platforms currently are Android, Cocoa (OS X),
DispManX (Raspberry Pi), EAGL (iOS), WGL (Windows) and generic X11,
Wayland and EGL platforms.
This replaces eglglessink and also is supposed to replace osxvideosink.
• New GstAggregator base class in gst-plugins-bad. This is supposed to
replace GstCollectPads in the future and fix long-known shortcomings
in its API. Together with the base class some elements are provided
already, like a videomixer (compositor).
Major changes:
• New plugins and elements:
∘ v4l2videodec element for accessing hardware codecs on
platforms that make them accessible via V4L2, e.g.
Samsung Exynos. This comes together with major refactoring
of the existing V4L2 elements and the corresponding
infrastructure.
The v4l2videodec element replaces the mfcdec element.
∘ New downloadbuffer element that replaces the download
buffering feature of queue2. Compared to queue2's code
it is much simpler and only for this single use case.
A noteworthy new feature is that it's downloading gaps
in the already downloaded stream parts when nothing else
is to be downloaded.
This is now used by playbin when download buffering is
enabled.
∘ rtpstreampay and rtpstreamdepay elements for transmitting
RTP packets over a stream API (e.g. TCP) according to
RFC 4571.
∘ rtprtx elements for standard compliant implementation of
retransmissions, integrated into the rtpmanager plugin.
∘ audiomixer element that mixes multiple audio streams together
into a single one while keeping synchronization. This is
planned to become the replacement of the adder element.
∘ OpenNI2 plugin for 3D cameras like the Kinect camera.
∘ OpenEXR plugin for decoding high-dynamic-range EXR images.
∘ curlsshsink and curlsftpsink to write files via SSH/SFTP.
∘ videosignal, ivfparse and sndfile plugins ported from 0.10.
∘ avfvideosrc, vtdec and other elements were ported from 0.10 and
are available on OS X and iOS now.
• Other changes:
∘ gst-libav now uses libav 10.2, and gained support for H265/HEVC.
∘ Support for hardware codecs and special memory types has been
improved with bugfixes and feature additions in various plugins
and base classes.
∘ Various bugfixes and improvements to buffering in queue2 and
multiqueue elements.
∘ dvbsrc supports more delivery mechanisms and other features
now, including DVB S2 and T2 support.
∘ The MPEGTS library has support for many more descriptors.
∘ Major improvements to tsdemux and tsparse, especially time and
seeking related.
∘ souphttpsrc now has support for keep-alive connections,
compression, configurable number of retries and configuration
for SSL certificate validation.
∘ hlsdemux has undergone major refactoring and works more
reliable now and supports more HLS features like trick modes.
Also fragments are pushed downstream while they're downloaded
now instead of waiting for each fragment to finish.
∘ dashdemux and mssdemux are now also pushing fragments downstream
while they're downloaded instead of waiting for each fragment to
finish.
∘ videoflip can automatically flip based on the orientation tag.
∘ openjpeg supports the OpenJPEG2 API.
∘ waylandsink was refactored and should be more useful now. It also
includes a small library which most likely is going to be removed
in the future and will result in extensions to the GstVideoOverlay
interface.
∘ gst-rtsp-server supports SRTP and MIKEY now.
∘ gst-libav encoders are now negotiating any profile/level settings
with downstream via caps.
∘ Lots of fixes for coverity warnings all over the place.
∘ Negotiation related performance improvements.
∘ 800+ fixed bug reports, and many other bug fixes and other
improvements everywhere that had no bug report.
Things to look out for:
• The eglglessink element was removed and replaced by the glimagesink
element.
• The mfcdec element was removed and replaced by v4l2videodec.
• osxvideosink is only available in OS X 10.6 or newer.
• On Android the namespace of the automatically generated Java class
for initialization of GStreamer has changed from com.gstreamer to
org.freedesktop.gstreamer to prevent namespace pollution.
• On iOS you have to update your gst_ios_init.h and gst_ios_init.m in
your projects from the one included in the binaries if you used the
GnuTLS GIO module before. The loading mechanism has slightly changed.
COMMENT should not be longer than 70 characters.
COMMENT should not begin with 'A'.
COMMENT should not begin with 'An'.
COMMENT should not begin with 'a'.
COMMENT should not end with a period.
COMMENT should start with a capital letter.
pkglint warnings. Some files also got minor formatting, spelling, and style
corrections.
GStreamer is a library that allows the construction of graphs of
media-handling components, ranging from simple Ogg/Vorbis playback to
complex audio (mixing) and video (non-linear editing) processing.
Applications can take advantage of advances in codec and filter technology
transparently. Developers can add new codecs and filters by writing a
simple plugin with a clean, generic interface.
GStreamer is released under the LGPL.
This package is part of the ugly GStreamer plugins; that is, those that
might pose some legal problems.
rillig
wiz
adam
prlw1
snj
maya
ryoon
agc
drochner
rodent