Xiph.Org is pleased to announce a full release of libvorbis 1.3.4.
The primary feature of this release is reduced static data size in
libvorbisenc, as well as associated minor changes required to
libvorbis and libvorbisfile. The release also contains minor build
fixes and build system updates. There are no functional changes
over the previous 1.3.3 release.
* vorbis: additional proofing against invalid/malicious
streams in floor, residue, and bos/eos packet trimming
code (see SVN for details).
* vorbis: Added programming documentation tree for the
low-level calls
* vorbisfile: Correct handling of serial numbers array
element [0] on non-seekable streams
* vorbisenc: Back out an [old] AoTuV HF weighting that was
first enabled in 1.3.0; there are a few samples where I
really don't like the effect it causes.
* vorbis: return correct timestamp for granule positions
with high bit set.
* vorbisfile: the [undocumented] half-rate decode api made no
attempt to keep the pcm offset tracking consistent in seeks.
Fix and add a testing mode to seeking_example.c to torture
test seeking in halfrate mode. Also remove requirement that
halfrate mode only work with seekable files.
* vorbisfile: Fix a chaining bug in raw_seeks where seeking
out of the current link would fail due to not
reinitializing the decode machinery.
* vorbisfile: improve seeking strategy. Reduces the
necessary number of seek callbacks in an open or seek
operation by well over 2/3.
libvorbis 1.3.1 (2010-02-26) -- "Xiph.Org libVorbis I 20100325 (Everywhere)"
* tweak + minor arithmetic fix in floor1 fit
* revert noise norm to conservative 1.2.3 behavior pending
more listening testing
libvorbis 1.3.0 (2010-02-25) -- unreleased staging snapshot
* Optimized surround support for 5.1 encoding at 44.1/48kHz
* Added encoder control call to disable channel coupling
* Correct an overflow bug in very low-bitrate encoding on 32 bit
machines that caused inflated bitrates
* Numerous API hardening, leak and build fixes
* Correct bug in 22kHz compand setup that could cause a crash
* Correct bug in 16kHz codebooks that could cause unstable pure
tones at high bitrates
Two of the patches were from upstream CVS, the other two are not needed
any longer because the configure script was improved.
libvorbis 1.2.3 (2009-07-09) -- "Xiph.Org libVorbis I 20090709"
* correct a vorbisfile bug that prevented proper playback of
Vorbis files where all audio in a logical stream is in a
single page
* Additional decode setup hardening against malicious streams
* Add 'OV_EXCLUDE_STATIC_CALLBACKS' define for developers who
wish to avoid avoid unused symbol warnings from the static
callbacks defined in vorbisfile.h
libvorbis 1.2.2 (2009-06-24) -- "Xiph.Org libVorbis I 20090624"
* define VENDOR and ENCODER strings
* seek correctly in files bigger than 2 GB (Windows)
* fix regression from CVE-2008-1420; 1.0b1 files work again
* mark all tables as constant to reduce memory occupation
* additional decoder hardening against malicious streams
* substantially reduce amount of seeking performed by Vorbisfile
* Multichannel decode bugfix
* build system updates
* minor specification clarifications/fixes
libvorbis 1.2.1 (unreleased) -- "Xiph.Org libVorbis I 20080501"
* Improved robustness with corrupt streams.
* New ov_read_filter() vorbisfile call allows filtering decoded
audio as floats before converting to integer samples.
* Fix an encoder bug with multichannel streams.
* Replaced RTP payload format draft with RFC 5215.
* Bare bones self test under 'make check'.
* Fix a problem encoding some streams between 14 and 28 kHz.
* Fix a numerical instability in the edge extrapolation filter.
* Build system improvements.
* Specification correction.
This changes the buildlink3.mk files to use an include guard for the
recursive include. The use of BUILDLINK_DEPTH, BUILDLINK_DEPENDS,
BUILDLINK_PACKAGES and BUILDLINK_ORDER is handled by a single new
variable BUILDLINK_TREE. Each buildlink3.mk file adds a pair of
enter/exit marker, which can be used to reconstruct the tree and
to determine first level includes. Avoiding := for large variables
(BUILDLINK_ORDER) speeds up parse time as += has linear complexity.
The include guard reduces system time by avoiding reading files over and
over again. For complex packages this reduces both %user and %sys time to
half of the former time.
libvorbis 1.2.0 (2007-07-25) -- "Xiph.Org libVorbis I 20070622"
* new ov_fopen() convenience call that avoids the common
stdio conflicts with ov_open() and MSVC runtimes.
* libvorbisfile now handles multiplexed streams
* improve robustness to corrupt input streams
* fix a minor encoder bug
* updated RTP draft
* build system updates
* minor corrections to the specification
and add a new helper target and script, "show-buildlink3", that outputs
a listing of the buildlink3.mk files included as well as the depth at
which they are included.
For example, "make show-buildlink3" in fonts/Xft2 displays:
zlib
fontconfig
iconv
zlib
freetype2
expat
freetype2
Xrender
renderproto
RECOMMENDED is removed. It becomes ABI_DEPENDS.
BUILDLINK_RECOMMENDED.foo becomes BUILDLINK_ABI_DEPENDS.foo.
BUILDLINK_DEPENDS.foo becomes BUILDLINK_API_DEPENDS.foo.
BUILDLINK_DEPENDS does not change.
IGNORE_RECOMMENDED (which defaulted to "no") becomes USE_ABI_DEPENDS
which defaults to "yes".
Added to obsolete.mk checking for IGNORE_RECOMMENDED.
I did not manually go through and fix any aesthetic tab/spacing issues.
I have tested the above patch on DragonFly building and packaging
subversion and pkglint and their many dependencies.
I have also tested USE_ABI_DEPENDS=no on my NetBSD workstation (where I
have used IGNORE_RECOMMENDED for a long time). I have been an active user
of IGNORE_RECOMMENDED since it was available.
As suggested, I removed the documentation sentences suggesting bumping for
"security" issues.
As discussed on tech-pkg.
I will commit to revbump, pkglint, pkg_install, createbuildlink separately.
Note that if you use wip, it will fail! I will commit to pkgsrc-wip
later (within day).
in the process. (More information on tech-pkg.)
Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.
Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.
libvorbis 1.1.0 (2004-09-22) -- "Xiph.Org libVorbis I 20040629"
* merges tuning improvements from Aoyumi's aoTuV with fixups
* new managed bitrate (CBR) mode support
* new vorbis_encoder_ctl() interface
* extensive documentation updates
* application/ogg mimetype is now official
* autotools cleanup from Thomas Vander Stichele
* SymbianOS build support from Colin Ward at CSIRO
* various bugfixes
* various packaging improvements
Package change:
install documentation in share/doc instead of share/doc/html.
All library names listed by *.la files no longer need to be listed
in the PLIST, e.g., instead of:
lib/libfoo.a
lib/libfoo.la
lib/libfoo.so
lib/libfoo.so.0
lib/libfoo.so.0.1
one simply needs:
lib/libfoo.la
and bsd.pkg.mk will automatically ensure that the additional library
names are listed in the installed package +CONTENTS file.
Also make LIBTOOLIZE_PLIST default to "yes".
by moving the inclusion of buildlink3.mk files outside of the protected
region. This bug would be seen by users that have set PREFER_PKGSRC
or PREFER_NATIVE to non-default values.
BUILDLINK_PACKAGES should be ordered so that for any package in the
list, that package doesn't depend on any packages to the left of it
in the list. This ordering property is used to check for builtin
packages in the correct order. The problem was that including a
buildlink3.mk file for <pkg> correctly ensured that <pkg> was removed
from BUILDLINK_PACKAGES and appended to the end. However, since the
inclusion of any other buildlink3.mk files within that buildlink3.mk
was in a region that was protected against multiple inclusion, those
dependencies weren't also moved to the end of BUILDLINK_PACKAGES.
the normal case when BUILDLINK_DEPENDS.<pkg> isn't specified, it receives
a value only once due to the multiple inclusion protection in the
bulldlink3.mk files. In the case where a package includes several
buildlink3.mk files that each want a slightly different version of another
dependency, having BUILDLINK_DEPENDS.<pkg> be a list allows for the
strictest <pkg> dependency to be matched.
* Corrects errors in the Vorbis specification documentation.
* Specification converted to DocBook format.
* Added timebase conversion call to libvorbis.
* Fixes ov_time_tell() bug for non-seekable streams.
* Various decoding fixes.
* Addition of ov_crosslap() which allows smooth transitions between
two vorbis segments.
* Numerous seeking fixes and optimizations.
* Fixed bugs affecting decode of one-audio-page samples.
* Added ov_halfrate() which allows a "free" conversion from the
source sample rate to half of the source rate.
* Improved handling of quiet signals in low bitrate modes
