and add a new helper target and script, "show-buildlink3", that outputs
a listing of the buildlink3.mk files included as well as the depth at
which they are included.
For example, "make show-buildlink3" in fonts/Xft2 displays:
zlib
fontconfig
iconv
zlib
freetype2
expat
freetype2
Xrender
renderproto
RECOMMENDED is removed. It becomes ABI_DEPENDS.
BUILDLINK_RECOMMENDED.foo becomes BUILDLINK_ABI_DEPENDS.foo.
BUILDLINK_DEPENDS.foo becomes BUILDLINK_API_DEPENDS.foo.
BUILDLINK_DEPENDS does not change.
IGNORE_RECOMMENDED (which defaulted to "no") becomes USE_ABI_DEPENDS
which defaults to "yes".
Added to obsolete.mk checking for IGNORE_RECOMMENDED.
I did not manually go through and fix any aesthetic tab/spacing issues.
I have tested the above patch on DragonFly building and packaging
subversion and pkglint and their many dependencies.
I have also tested USE_ABI_DEPENDS=no on my NetBSD workstation (where I
have used IGNORE_RECOMMENDED for a long time). I have been an active user
of IGNORE_RECOMMENDED since it was available.
As suggested, I removed the documentation sentences suggesting bumping for
"security" issues.
As discussed on tech-pkg.
I will commit to revbump, pkglint, pkg_install, createbuildlink separately.
Note that if you use wip, it will fail! I will commit to pkgsrc-wip
later (within day).
Several changes are involved since they are all interrelated. These
changes affect about 1000 files.
The first major change is rewriting bsd.builtin.mk as well as all of
the builtin.mk files to follow the new example in bsd.builtin.mk.
The loop to include all of the builtin.mk files needed by the package
is moved from bsd.builtin.mk and into bsd.buildlink3.mk. bsd.builtin.mk
is now included by each of the individual builtin.mk files and provides
some common logic for all of the builtin.mk files. Currently, this
includes the computation for whether the native or pkgsrc version of
the package is preferred. This causes USE_BUILTIN.* to be correctly
set when one builtin.mk file includes another.
The second major change is teach the builtin.mk files to consider
files under ${LOCALBASE} to be from pkgsrc-controlled packages. Most
of the builtin.mk files test for the presence of built-in software by
checking for the existence of certain files, e.g. <pthread.h>, and we
now assume that if that file is under ${LOCALBASE}, then it must be
from pkgsrc. This modification is a nod toward LOCALBASE=/usr. The
exceptions to this new check are the X11 distribution packages, which
are handled specially as noted below.
The third major change is providing builtin.mk and version.mk files
for each of the X11 distribution packages in pkgsrc. The builtin.mk
file can detect whether the native X11 distribution is the same as
the one provided by pkgsrc, and the version.mk file computes the
version of the X11 distribution package, whether it's built-in or not.
The fourth major change is that the buildlink3.mk files for X11 packages
that install parts which are part of X11 distribution packages, e.g.
Xpm, Xcursor, etc., now use imake to query the X11 distribution for
whether the software is already provided by the X11 distribution.
This is more accurate than grepping for a symbol name in the imake
config files. Using imake required sprinkling various builtin-imake.mk
helper files into pkgsrc directories. These files are used as input
to imake since imake can't use stdin for that purpose.
The fifth major change is in how packages note that they use X11.
Instead of setting USE_X11, package Makefiles should now include
x11.buildlink3.mk instead. This causes the X11 package buildlink3
and builtin logic to be executed at the correct place for buildlink3.mk
and builtin.mk files that previously set USE_X11, and fixes packages
that relied on buildlink3.mk files to implicitly note that X11 is
needed. Package buildlink3.mk should also include x11.buildlink3.mk
when linking against the package libraries requires also linking
against the X11 libraries. Where it was obvious, redundant inclusions
of x11.buildlink3.mk have been removed.
in the process. (More information on tech-pkg.)
Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.
Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.
All library names listed by *.la files no longer need to be listed
in the PLIST, e.g., instead of:
lib/libfoo.a
lib/libfoo.la
lib/libfoo.so
lib/libfoo.so.0
lib/libfoo.so.0.1
one simply needs:
lib/libfoo.la
and bsd.pkg.mk will automatically ensure that the additional library
names are listed in the installed package +CONTENTS file.
Also make LIBTOOLIZE_PLIST default to "yes".
by moving the inclusion of buildlink3.mk files outside of the protected
region. This bug would be seen by users that have set PREFER_PKGSRC
or PREFER_NATIVE to non-default values.
BUILDLINK_PACKAGES should be ordered so that for any package in the
list, that package doesn't depend on any packages to the left of it
in the list. This ordering property is used to check for builtin
packages in the correct order. The problem was that including a
buildlink3.mk file for <pkg> correctly ensured that <pkg> was removed
from BUILDLINK_PACKAGES and appended to the end. However, since the
inclusion of any other buildlink3.mk files within that buildlink3.mk
was in a region that was protected against multiple inclusion, those
dependencies weren't also moved to the end of BUILDLINK_PACKAGES.
(alternatively, we could have renamed one to '<pkgname>-x11', but for the
element of least surprise, the default remains x11 enabled).
This will work much better than the previous attempt to build two packages
from one Makefile, which wasn't all thought out wrt to dependencies, buildlinks etc.
Bump PKGREVISION on plotutils and gnuplot for this.
libstdc++ in gcc3.
when defined, USE_GCC_SHLIB ensures that the correct rpath is passed
to the linker, and a full dependency on the compiler package is
registered.
packages which define USE_GCC_SHLIB should not include
mk/gcc.buildlink2.mk (or gcc{,3}/buildlink2.mk) as it is handled
automatically.
all dependencies on packages depending on "png" which contain shared
libraries, all for the (imminent) update to the "png" package.
[List courtesy of John Darrow, courtesy of "bulk-build".]
Summary of changes:
- removal of USE_GTEXINFO
- addition of mk/texinfo.mk
- inclusion of this file in package Makefiles requiring it
- `install-info' substituted by `${INSTALL_INFO}' in PLISTs
- tuning of mk/bsd.pkg.mk:
removal of USE_GTEXINFO
INSTALL_INFO added to PLIST_SUBST
`${INSTALL_INFO}' replace `install-info' in target rules
print-PLIST target now generate `${INSTALL_INFO}' instead of `install-info'
- a couple of new patch files added for a handful of packages
- setting of the TEXINFO_OVERRIDE "switch" in packages Makefiles requiring it
- devel/cssc marked requiring texinfo 4.0
- a couple of packages Makefiles were tuned with respect of INFO_FILES and
makeinfo command usage
See -newly added by this commit- section 10.24 of Packages.txt for
further information.
using the newest PNG library won't work on system with an older one. To
prevent such problems with precompiled binary packages require at least
"png-1.0.9nb1" in all dependences.
out of date - it was based on a.out OBJECT_FMT, and added entries in the
generated PLISTs to reflect the symlinks that ELF packages uses. It also
tried to be clever, and removed and recreated any symbolic links that were
created, which has resulted in some fun, especially with packages which
use dlopen(3) to load modules. Some recent changes to our ld.so to bring
it more into line with other Operating Systems also exposed some cracks.
+ Modify bsd.pkg.mk and its shared object handling, so that PLISTs now contain
the ELF symlinks.
+ Don't mess about with file system entries when handling shared objects in
bsd.pkg.mk, since it's likely that libtool and the BSD *.mk processing will
have got it right, and have a much better idea than we do.
+ Modify PLISTs to contain "ELF symlinks"
+ On a.out platforms, delete any "ELF symlinks" from the generated PLISTs
+ On ELF platforms, no extra processing needs to be done in bsd.pkg.mk
+ Modify print-PLIST target in bsd.pkg.mk to add dummy symlink entries on
a.out platforms
+ Update the documentation in Packages.txt
With many thanks to Thomas Klausner for keeping me honest with this.
Many bug fixes since the last release. For a complete list of changes refer
to the NEWS file.
Notable additions include:
libplot: SVG driver added, which outputs the new XML-based SVG (scalable
vector graphics) format.
documentation: man page for plotfont added.
libplot: completely new metafile export driver, written from scratch.
libplot: ReGIS driver added, which outputs ReGIS (DEC's remote graphics
instruction set, understood by DEC's VT340 and earlier terminals,
and also emulators like DEC's decterm). No support yet for filling
paths that extend beyond the boundaries of a ReGIS display, due to
a need for clipping code.
graph,plot,tek2plot,plotfont,pic2plot: `-T png' now allowed if libplot
contains a PNG driver.
libplot: PNG driver added, which outputs PNG (portable network graphics)
format. Included only if libpng (version number >= 0.95) and libz
are found at package installation time. `configure' now supports
a `--without-libpng' option to disable PNG support.
