- mtlogin: support cloginrc passphrase and identity
- ios.pm: add ios::ShowCellular() and cmd show cellular 0 profile
- control_rancid: fix mail rcpt bug in error path
- rancid-cvs: change git push.default to current
- add .old to configs/{.cvsignore,.gitignore}; see control_rancid.1
- rancid.pm: rework IP address sorting
- ciscowlc.pm: filter some config junk that wont import
- nxos.pm: not all nexus have show process log vdc-all
- f5rancid: filter fluctuating monitor state in config
- FAQ: updates
- ios.pm: drop the fabricated portion of the "Chassis type:" line; its
too much to try to track it accurately and doesnt seem to provide any
value
- foundry.pm: filter altitude and pressure in ShowChassis
- ios.pm: cellular modem speeds not filtered on C819G
- ios.pm: 3560X w/ XE has different show sdm prefer and show system mtu
formats
- update lg for router.db delimeter change
- rename slogin to plogin (poly-login), as slogin collides with ssh pkg
- jlogin, mtlogin: set tty init options when there is no controlling tty,
and update jlogin to match this method to an error from stty on the O/S
used by the user, Linux, I believe.
http://www.shrubbery.net/pipermail/rancid-discuss/2015-January/007981.html
- flogin: send term length 0 for MLX & other cases.
- flogin: remove sleeps, send -h should work, and lower send_human timers
- *login: set base send_human values and lower (faster) values where it
was already set (clogin, complogin, etc), except flogin.
- rancid.conf: add DIFFSCRIPT knob
- dllogin, wlogin: handle -t option
- control_rancid: read rancid.conf sooner & fix handling group/ranicd.conf
- rancid-run: pass -f to control_rancid
- Fix the commit command used for -r
- Updates to default mail headers for RFC3834 & MS
- rancid.types: fix show config commands for cisco-wlc*
- ios.pm: filter line password on c2800s & c2900s
- add support for git. See the UPGRADING file.
- rancid-cvs: add -f option
- dell.pm: filter up time from show switch
- control_rancid: svn cleanup after collection commits
- iosxr.pm: access-list/prefix-list sorting regex fixes
- ios.pm: access-list/prefix-list sorting regex fixes
- nxos.pm: filter ASIC/INTAKE cycling temps
- panos.pm: convert panrancid to a module
- panlogin, panrancid: import palo alto network script
- jlogin: set tty width to 132 to avoid problems with cli
complete-on-space, which fixes problems occuring when hostnames are
longer
- iosxr.pm: access-list regex truncating lines
- rancid.pm: improve IP sorting, esp for IPv6
- ios.pm: filter show flash & dir bytes free better
- ciscowlc: add filters for oscillating config & env o/p
- ciscowlc: convert Cisco WLC scripts to library
- import Cisco WLC scripts from
http://www.shrubbery.net/pipermail/rancid-discuss/2010-February/004652.html
- *login.in; fix handling of empty lines in -x input
- nxos.pm: recognize invalid command in ShowFex
- nxos.pm: does not set $proc
- nxrancid: convert nexus to module nxos.pm
- ios.pm: save "next reload" template
- tntlogin, tntrancid: remove TNT support
- par, hpuifilter: type fixes for Raspian compatibility
- slogin: add switching login
- ios.pm: filter timestamp and size from filename "syslog"
- configure: complain if sendmail is not found
- control_rancid: DIR set too early
- clogin,ios.pm,iosxr.pm: escape plus (+) regex atom in prompt handling
- foundry.pm: remove rogue newline in regex
- Note Allied Telesis AW+ devices support, works as type 'cisco'
according to Allied Telesis Employees
- fix handling of absent sendmail in configure script
future releases, the most prominent of which is removal of rancid-fe and
several device-specific script in exchange for device-specific and generic
libraries and a generic script. The generic script, which assumed the
name rancid, loads the relevant library and runs commands as defined by a
configuration file, which means less code duplication, users can more
easily adjust the commands that are run and create their own "device_types"
or filters without altering the base code, and hopefully this means it is
easier for users to upgrade to future versions.
See rancid.types.conf(5). Please, for your benefit and ours, do not alter
the rancid.types.base configuration file; new versions of RANCiD purposely
overwrite this file at installation time.
Not all of the device types have been converted to libraries yet, just
the prominent ones or those prominent to us: Cisco, Juniper, Compass,
Arbor, MRV. We also still have suggestions from users about this new
process to consider and/or implement.
3.0 also includes a new version of par(1) implemented in C. It fixes a
few bugs in the perl version and hopefully does not introduce any new ones.
NOTE WELL: The router.db field separator has been changed to ';' from ':'
to avoid conflict with IPv6 addresses and etc.
- rancid: filter sup-bootflash if sup-bootdisk worked
- *login: fix match of (yes/no) prompts from ssh
- rancid: carry-over additional inventory filtering from XR
2.3.7
- xrrancid: change some "admin show" sorting to reflect previous code
- xrrancid: filter useless junk from show inventory
- mrvrancid: update ShowChassis() for temp filtering in new s/w
- nrancid: installed memory on Juniper SSG series
- rancid: missing CR after s/n
- xrrancid: admin show variables boot clean-up
- xrrancid: add admin show install summary, license
- xrrancid: fix access-list formatting & sorting
- rancid: collect show capture & shun for ASA
- xrancid: misc patches for XOS
- rancid-cvs: svn repository handling improvement
- rancid: filter WPA passwd
- rancid: add 'show running-config view full' for role cli
- rancid: filter ppp hostnames (aka usernames) - Pavel Korovin
- *login: update host key change match for newer ssh
- clogin: disable pager for XOS-12.3
- rancid.conf & control_rancid: support arbitrary subversion URLs as
(pre-provisioned) repositories and do not overwrite an existing local
repository
- rancid.conf: add LC_COLLATE
- nlogin: add identfile support
- hrancid: match 'logout' in new procurve versions for end of run
- hrancid: include comment line for procurve parser
- hrancid: collect show config status
- nxrancid: add show environment fex all fan cmd - Deny IP Any Any
- *login: dont split $sshcmd
- nxrancid: Nexus 4000s don't support 'show environment power'
- xrrancid: add admin show running
- arancid: /info/sys -> /info/sys/dump
- rancid: correct isakmp key filter
- clogin; set terminal width to 132 for both -s and -c
- clogin: respond to ASA's pager in long login banners
- clogin: set terminal width to 132
- rancid: match flash memory on likes of Cisco 2811 and 2621XM
- import share/rancid-cvspurge
- rancid: add 'dir /all sup-bootdisk:' for 6500 sup32
- rancid: adjust regex for tacacs key match
- *login: join sshcmd clogin directive to handle spaces properly
- mt{login,rancid}: import Microtik module
- rancid: ppp password missed on dialer interfaces
- arancid: filter "esecret" lines which change with each config display
- hlogin: logout from enabled mode instead of exit for -S
- hrancid: collect show config files and show tech transceivers
- rancid: filter config timestamp on MDS/NX-OS
- avorancid: collect power management file
- fnrancid: correct comment character
- fnrancid: update system time and conf_file_ver filters
- nxrancid: do not require 'show system redundancy status', apparently
unsupported on some nexus models.
- clogin: set terminal width for -c and -s
- hlogin: stacks prompt for switch number or CR at login, send CR
* rancid: fail on error opening nvram:
* rancid: skip ASA 5520 configuration author line
* control_rancid: for svn stupidity, run update (yes update) and commit
after setting svn:ignore, else . is out of date.
* rancid: filter auto "rogue ap" configuration
* alogin: adjust match of active alarms msg at login
* jrancid: patch for master/backup matching on EX series
* rancid: update cisco WAE identity string match
* {xr}rancid: summarize DirSlotN() bytes free as GB, else MB.
* rancid: filter sflog from DirSlotN() for IOS on cisco 10k
* fnrancid: update recent fortinet software
* rancid: ignore show flash on IOS XE
* rancid: copy the dhcp database filter to ShowFlash()
* clogin: Fix pasto in IOS terminal width command.
* hlogin: -r missing from usage o/p
* clogin: add -r and passphrase/identfile from cloginrc
* francid: remove system uptime line on CER 3000
2.3.5
* alogin: respond to active alarms msg at login
* *rancid: update for grammar deprecated in perl 5.12
* *login: handle noenable value consistently, '1' to turn it on
* configure: look for -n <count> option to ping, for Windows ping (over
cygwin)
* rancid: missed case fpr accepting '>' prompt, rather than just '#'
* xrrancid: filter sequences from ipv4/6 access-lists
* zrancid: force terminal type vt100 so as not to confuse Linux
* francid: filter system uptime on new Brocades
* rancid: filter ASA time-based license noise
* rancid: filter command in WriteTerm if echoed
* configure: specifically look for ping in /sbin & /usr/sbin & fix typo
in test operator
* rancid: handle a few IOS serial number formatting variants
* hpuifilter: change filtering to avoid use of string functions due to a
Debian bug. Should be faster too.
* rancid: adjust show inventory matches for variables WS
* nxrancid: show environment clock and show core vdc-all are not valid
commands on all platforms
* rancid: remove sequences from IPv6 prefix-lists
* clogin: adjust default ssh password prompt for ExtremeOS 12.3.3.6
* rancid: Accept '>' prompt, rather than just '#'
* avologin: fix ssh command substitution
* fnrancid: filter application signature, System Time & conf_file_ver=
from GetSystem/GetConf
* mrvrancid: filter other oscillating info from show version
* xrrancid: disable timestamps
* hlogin: implement -autoenable for newer hp procurve releases
* cat5rancid: snmp community may have multiple spaces b/t community name
and permissions
* cat5rancid: filter local user password
* f5rancid: filter Failover time stamps
* hlogin: Add support for ssh identity file & passphrase for newer boxes
* rancid: split IOS-XR into its own device type: cisco-xr
* clogin: set term width for catos like for ios.
* rancid: parse admin show diag for XR better with a separate function
* hlogin: hpuifilter got omitted from the ssh spawn; replace it.
* nxrancid: match unknown command errors appropriately & GC some junk
carried-over from IOS-rancid.
* rancid: check for device busy when opening flash fails, which seems to
occur on 6500s when some other command is run.
* *login: support :port method syntax for ssh and adjust to allow spaces
in sshcmd
* jrancid: fix return values of formatting functions
* clogin: set terminal width so that o/p is consistent
* rancid: filter some crud resulting from the change in handling non-empty
comment lines. fail if the configuration buffer fills. filter
dhcp_[^[:space:].].txt from flash directories, so it does not create
constant changes resulting from the ip dhcp database saves. filter ldap host
password on PIX. when compressing consecutive comment lines, only consider
empty lines.
* arancid: handle password filter for HP 1:10Gb Ethernet Blade Switch
5.0.4-Base, running AOS
* *login: add cloginrc timeout directive
* nrancid: fix control number match
* rancid: remove ASA coredump* filter - Cisco Bug CSCsz85597, fixed in
8.2(1.2), 8.3(0.0), 100.3(0.3)M
* f5rancid: adjust fan rpm and config sync time filters for new f5 code
* rancid: ACE/SANOS report invalid input differently. skip leading blank lines
in config.remove ASA keys such as tacacs and radius. match non-space for
usernames in "Written by" line.
* *rancid: quote meta characters
* rancid: Fail on error msg "% Configuration buffer full" seen on 6500. Dont
filter 'show vlan' on Catalyst 3550/4500s
* import Arista script
* jerancid: fix for 'show environment all' for filtering with auto-sync
on BRASes
* francid,flogin: edgeiron can not disable the pager and does not offer
some commands found on the bigirons
* rancid: filter coredumpinfo/coredump.cfg found on ASA - rancid-discuss@
* f5rancid: fileter HA peer status
* WTI scripts from Geert Jan de Groot with a few tweaks
* jerancid: include standby slots in showversion o/p
* lg: add code for LG_SINGLE config knob
* clogin: run_commands() needs do_saveconfig
* f10rancid: change fan status parsing to handle c300
* nxrancid: collect license info; fix 'show env temp' & 'show
env power' parsing; drop unused code.
* change zero-config check to avoid broken awks
including software and hardware (cards, serial numbers, etc) and uses CVS
(Concurrent Version System) or Subversion to maintain history of changes.
CVE-2008-4979 (getipacctg) is still not fixed by upstream, however,
that script is not part of the core fuction (rather a contrib)
and probably not going to be used by the normal users of this package.
