The actual fix as been done by "pkglint -F */*/buildlink3.mk", and was
reviewed manually.
There are some .include lines that still are indented with zero spaces
although the surrounding .if is indented. This is existing practice.
Unsorted entries in PLIST files have generated a pkglint warning for at
least 12 years. Somewhat more recently, pkglint has learned to sort
PLIST files automatically. Since pkglint 5.4.23, the sorting is only
done in obvious, simple cases. These have been applied by running:
pkglint -Cnone,PLIST -Wnone,plist-sort -r -F
Issues found with existing distfiles:
distfiles/eclipse-sourceBuild-srcIncluded-3.0.1.zip
distfiles/fortran-utils-1.1.tar.gz
distfiles/ivykis-0.39.tar.gz
distfiles/enum-1.11.tar.gz
distfiles/pvs-3.2-libraries.tgz
distfiles/pvs-3.2-linux.tgz
distfiles/pvs-3.2-solaris.tgz
distfiles/pvs-3.2-system.tgz
No changes made to these distinfo files.
Otherwise, existing SHA1 digests verified and found to be the same on
the machine holding the existing distfiles (morden). All existing
SHA1 digests retained for now as an audit trail.
libXext/buildlink3.mk, now that it is included there.
Leave the places where its API version is set or variables from it
are used directly (about 3 packages).
This changes the buildlink3.mk files to use an include guard for the
recursive include. The use of BUILDLINK_DEPTH, BUILDLINK_DEPENDS,
BUILDLINK_PACKAGES and BUILDLINK_ORDER is handled by a single new
variable BUILDLINK_TREE. Each buildlink3.mk file adds a pair of
enter/exit marker, which can be used to reconstruct the tree and
to determine first level includes. Avoiding := for large variables
(BUILDLINK_ORDER) speeds up parse time as += has linear complexity.
The include guard reduces system time by avoiding reading files over and
over again. For complex packages this reduces both %user and %sys time to
half of the former time.
or USE_X11BASE set, but don't include mk/x11.buildlink3.mk directly or
via buildlink3.mks
- introduce BUILDLINK_PREFIX.libXpm as alias for BUILDLINK_PREFIX.xpm
in the !modular case
- fix some cases where the check for libX11 couldn't work at all by using
C++ for compilation without including the proper headers
Verified using a full X11_TYPE=xorg bulk build without additional
breakage. Discussed with salo@, wiz@ and send to packages@ for feedback.
packages with the modular Xorg equivalent. Those are falling back
to the old location by default, so this commmit doesn't change
dependencies.
graphics/xpm ==> x11/libXpm
fonts/Xft2 ==> x11/libXft
x11/Xfixes ==> x11/libXfixes
x11/xcursor ==> x11/libXcursor
x11/Xrender ==> x11/libXrender
x11/Xrandr ==> libXrandr
had actually been ignoring LTCONFIG_OVERRIDE anyway and just using
the default LIBTOOL_OVERRIDE to replace libtool scripts in packages.
This just formalizes the fact that LTCONFIG_OVERRIDE is not used
meaningfully by pkgsrc.
and add a new helper target and script, "show-buildlink3", that outputs
a listing of the buildlink3.mk files included as well as the depth at
which they are included.
For example, "make show-buildlink3" in fonts/Xft2 displays:
zlib
fontconfig
iconv
zlib
freetype2
expat
freetype2
Xrender
renderproto
RECOMMENDED is removed. It becomes ABI_DEPENDS.
BUILDLINK_RECOMMENDED.foo becomes BUILDLINK_ABI_DEPENDS.foo.
BUILDLINK_DEPENDS.foo becomes BUILDLINK_API_DEPENDS.foo.
BUILDLINK_DEPENDS does not change.
IGNORE_RECOMMENDED (which defaulted to "no") becomes USE_ABI_DEPENDS
which defaults to "yes".
Added to obsolete.mk checking for IGNORE_RECOMMENDED.
I did not manually go through and fix any aesthetic tab/spacing issues.
I have tested the above patch on DragonFly building and packaging
subversion and pkglint and their many dependencies.
I have also tested USE_ABI_DEPENDS=no on my NetBSD workstation (where I
have used IGNORE_RECOMMENDED for a long time). I have been an active user
of IGNORE_RECOMMENDED since it was available.
As suggested, I removed the documentation sentences suggesting bumping for
"security" issues.
As discussed on tech-pkg.
I will commit to revbump, pkglint, pkg_install, createbuildlink separately.
Note that if you use wip, it will fail! I will commit to pkgsrc-wip
later (within day).
developer is officially maintaining the package.
The rationale for changing this from "tech-pkg" to "pkgsrc-users" is
that it implies that any user can try to maintain the package (by
submitting patches to the mailing list). Since the folks most likely
to care about the package are the folks that want to use it or are
already using it, this would leverage the energy of users who aren't
developers.
Several changes are involved since they are all interrelated. These
changes affect about 1000 files.
The first major change is rewriting bsd.builtin.mk as well as all of
the builtin.mk files to follow the new example in bsd.builtin.mk.
The loop to include all of the builtin.mk files needed by the package
is moved from bsd.builtin.mk and into bsd.buildlink3.mk. bsd.builtin.mk
is now included by each of the individual builtin.mk files and provides
some common logic for all of the builtin.mk files. Currently, this
includes the computation for whether the native or pkgsrc version of
the package is preferred. This causes USE_BUILTIN.* to be correctly
set when one builtin.mk file includes another.
The second major change is teach the builtin.mk files to consider
files under ${LOCALBASE} to be from pkgsrc-controlled packages. Most
of the builtin.mk files test for the presence of built-in software by
checking for the existence of certain files, e.g. <pthread.h>, and we
now assume that if that file is under ${LOCALBASE}, then it must be
from pkgsrc. This modification is a nod toward LOCALBASE=/usr. The
exceptions to this new check are the X11 distribution packages, which
are handled specially as noted below.
The third major change is providing builtin.mk and version.mk files
for each of the X11 distribution packages in pkgsrc. The builtin.mk
file can detect whether the native X11 distribution is the same as
the one provided by pkgsrc, and the version.mk file computes the
version of the X11 distribution package, whether it's built-in or not.
The fourth major change is that the buildlink3.mk files for X11 packages
that install parts which are part of X11 distribution packages, e.g.
Xpm, Xcursor, etc., now use imake to query the X11 distribution for
whether the software is already provided by the X11 distribution.
This is more accurate than grepping for a symbol name in the imake
config files. Using imake required sprinkling various builtin-imake.mk
helper files into pkgsrc directories. These files are used as input
to imake since imake can't use stdin for that purpose.
The fifth major change is in how packages note that they use X11.
Instead of setting USE_X11, package Makefiles should now include
x11.buildlink3.mk instead. This causes the X11 package buildlink3
and builtin logic to be executed at the correct place for buildlink3.mk
and builtin.mk files that previously set USE_X11, and fixes packages
that relied on buildlink3.mk files to implicitly note that X11 is
needed. Package buildlink3.mk should also include x11.buildlink3.mk
when linking against the package libraries requires also linking
against the X11 libraries. Where it was obvious, redundant inclusions
of x11.buildlink3.mk have been removed.
in the process. (More information on tech-pkg.)
Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.
Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.
All library names listed by *.la files no longer need to be listed
in the PLIST, e.g., instead of:
lib/libfoo.a
lib/libfoo.la
lib/libfoo.so
lib/libfoo.so.0
lib/libfoo.so.0.1
one simply needs:
lib/libfoo.la
and bsd.pkg.mk will automatically ensure that the additional library
names are listed in the installed package +CONTENTS file.
Also make LIBTOOLIZE_PLIST default to "yes".
by moving the inclusion of buildlink3.mk files outside of the protected
region. This bug would be seen by users that have set PREFER_PKGSRC
or PREFER_NATIVE to non-default values.
BUILDLINK_PACKAGES should be ordered so that for any package in the
list, that package doesn't depend on any packages to the left of it
in the list. This ordering property is used to check for builtin
packages in the correct order. The problem was that including a
buildlink3.mk file for <pkg> correctly ensured that <pkg> was removed
from BUILDLINK_PACKAGES and appended to the end. However, since the
inclusion of any other buildlink3.mk files within that buildlink3.mk
was in a region that was protected against multiple inclusion, those
dependencies weren't also moved to the end of BUILDLINK_PACKAGES.
redefines about which buildlink.mk files would care is BUILDLINK_X11_DIR,
which points to the location of the X11R6 hierarchy used during building.
If x11.buildlink.mk isn't included, then BUILDLINK_X11_DIR defaults to
${X11BASE} (set in bsd.pkg.mk), so its value is always safe to use. Remove
the ifdefs surrounding the use of BUILDLINK_X11_DIR in tk/buildlink.mk and
revert changes to move x11.buildlink.mk before the other buildlink.mk files.
use X11_BUILDLINK_MK as a test value. Generally just reordering the
inclusions so that x11.buildlink.mk comes before the other buildlink.mk
files will make everthing work.
to ${X11BASE} in the header and library search paths into references to
${LOCALBASE}/share/x11-links. These packages should now be strongly-
buildlinked regardless of whether xpkgwedge is installed.
Changes well-tested on NetBSD-1.5X/i386 with and without xpkgwedge and
lightly-tested on NetBSD-1.5.1/alpha without xpkgwedge.
BUILDLINK_PREFIX.<pkgname>. This allows buildlink to find X11BASE packages
regardless of whether they were installed before or after xpkgwedge was
installed. Idea by Alistair Crooks <agc@pkgsrc.org>.
