--------------------------
- Changes for xlog version 2.0.14 - 2016-dec-11
* Updated cty.dat to 20161124 (cty-2614)
* Fixed compiler error with new gcc, in adif.c, with unused variable
* GCC Bug #28901, https://gcc.gnu.org/bugzilla/show_bug.cgi?id=28901
* Fixed math library linker issue exposed by recent gcc change
* Updated the author's email address
* Fixed a GUI bug in Settings->Dialogs and Windows->Scoring
(thanks, Andrew N2CN for the patch)
* Hamlib preference setting now understands /dev/serial/by-id
* Hamlib preference setting shows all /dev/ttyUSB* that are present
* Fixed crash with Select a Radio dialog in Hamlib preferences
(pkgsrc changes)
- Dropped patch-src_logfile_adif2.c, seems now has fix, see above.
(but not confirmed with clang yet, sorry)
- Add following line, pkglint asks for the line
.include "../../graphics/gnome-icon-theme/buildlink3.mk"
-----------------------------
(from doc/xnec2c.html)
Version 3.5.1:
After a request by FanJun BH1SCW, I replaced the original
makeshift desktop icon with one provided by Serge ON4AA.
- drop patch, seems included in upstream with condition:
#if !GLIB_CHECK_VERSION(2,32,0)
(upstream)
- Updated ham/grig to 0.8.1
-------------------------
GRIG 0.8.1:
- Maintenance update
- French l10n
-----------------------------
(from doc/xnec2c.html)
Version 3.5:
I modified the NEC2 Editor code so that when a Geometry or
Command editor window is opened, activating Apply or OK will
save data in the editor window to the treeview, even if the
default data is not edited.
I modified the NEC2 Editor code so that if a treeview row is
removed while the relevant editor window is open, then
activating Apply or OK will not attempt to save data to the
treeview, since this will cause an illegal memory access and
will crash xnec2c.
Fixed a bug in the Helix editor which caused incorrect
calculation of the segment length as a percentage of
wavelength or of the number of segments/turn that correspond
to a given segment length as a percentage of wavelength.
-------------------------
## 003.009.004
- GPIO control: Fix address mismatch for RX and full duplex.
This fixes full-duplex mode for most devices.
- B200: Fixed auto rate selection (can now select 61.44 Msps)
- UBX: Fix member declaration order which could cause
segfaults for debug builds
- Manual/Docs: Numerous fixes, use dot for graphs in manual
- Utils: multiple fixes for query_gpsdo_sensors, fixed floating point
comparison
- Windows: Include registry file in installation
- Converters: Improve NEON converters
------------------------
## 003.009.003
* UBX: Fixed a phase synchronization issue on the sub-1GHz band
* USB: Fixed transport issue that crashed when multiple USB devices were
connected on a Windows machine, more graceful handling of USB disconnects,,
provided .cdf file for installing on Windows
* B200: Fixed memory growth/increasing tune times issue
* E300: Fixed memory leak with udev, fixed issue with autoboot value, fixes
to button behaviour
* usrp2, usrp3: Fixed IQ imbalance and DC bias in DDC chain
* CMake: Windows registry fixes
* Fixed several compiler warnings and minor bugs
* Examples: Updated benchmark_rate for improved thread safety
prerequisite (buildlink3). Thanks Dave Tyson for the report at pkgsrc-users@.
PKGREVISION++. Those two depends on gnuradio-fec, so the same situation as it.
(PLIST of these two are NOT affected, but actuall installation PLIST will
be different because of gnuradio-fec is also installed with those).
-----------------------------------------------------------------
Following is not for explicit 2.2.1 release but for 2.2,
(attached to mail from Rick Murphy on 2015/12/31 as
Subject: TrustedQSL 2.2 final release is available for download)
-----------------------------------------------------------------
Trusted QSL V2.2 Release Notes
This version of Trusted QSL (TQSL) has corrections for defects found since
TQSL 2.1 was released (including the updates made for TQSL 2.1.1, 2.1.2,
and 2.1.3) as well as improvements to permit TQSL and Logbook of the World
to support the National Parks on the Air competition.
TQSL 2.2 can be installed to upgrade any older version of TQSL. Downgrade
to TQSL 2.1.3 can be seamlessly performed by uninstalling TQSL 2.2 and
reinstalling TQSL 2.1.3.
On all three supported platforms (Windows, MacOS, and Linux), installing
TQSL 2.2 will replace older versions of Trusted QSL while preserving your
Callsign Certificates, Station Locations, and preferences. On Windows,
simply run the TQSL 2.2 installer, which will automatically uninstall
older versions of TQSL (and, if installed, TQSLCert). On Mac OS X, open
the disk image (.dmg) file and drag the "Trusted QSL" folder to your
Applications folder. Direct the installer to "Replace All", which will
uninstall old files. For Linux systems, unpack the tar file and read the
INSTALL file for directions.
The following list describes the major changes in the v2.2
release of Trusted QSL.
TQSL changes
Defects Corrected:
Fix a defect that could cause saving of Calllsign Certificate private keys
to be suppressed.
When renewing a Callsign Certificate, entering an invalid password would
display an incorrect "Invalid Argument" error versus displaying the proper
"Invalid password" error. Under some circumstances, this could cause the
related Callsign Certificate to be lost.
Accept C7 and 4Y as valid callsign prefixes.
When installing a Callsign Certificate fails, display the callsign and
serial number to facilitate troubleshooting.
When deleting Callsign Certificates and Station Locations, save a copy to
allow those to be restored.
Reject QSOs that do not specify at least mode, band, date, and time.
Correct the TQSL ADIF editor to not use the local decimal point separator
for frequencies, as ADIF requires a period(.).
Major feature Additions:
Use Portuguese (Portugal) translations contributed by Nuno, CT2IRY.
Allow multiple dependent fields on a station location screen. This allows
both a county and a park entry to be modified when the US state changes
for a US Station Location.
- Drop two patches,
they are now included (but not exactly the same as our patches).
(upstream)
- Update 3.23.07 to 3.23.08
-------------------------
=Version 3.23.08=
2016-02-21 Rik van Riel <riel@surriel.com>
bbbeed4: NAVTEX update
2016-02-16 David Freese <iam_w1hkj@w1hkj.com>
5b2edad: Save Logbook
1c8e0e9: Analysis mode
0f650e9: flrig PTT
106e3e2: flrig waiting
71fa224: COM port close
dd1165a: fsq repeat last
fb0fd4c: Mac Logger
2016-02-04 Jonathan Wakely <redi@users.sf.net>
813b58a: GCC 6 build
2016-02-01 David Freese <iam_w1hkj@w1hkj.com>
d808977: CALL capture
bea9cfe: Scope View
8bcc9e8: RigCAT modifications
Packaging changes:
Drop MAKE_JOBS_SAFE=no; it seems to build fine with -j4.
Clean up workarounds for resolved issues.
Drop rpc conditional, because upstream removed rpc entirely
Upstream changes:
Many bug fixes and new radios.
Drop RPC.
Rototill build system.
Add readline support (not packaged yet).
Change to single library instead of many.
----------------------------
ChangeLog is the same as 3.23.07.19 to 3.23.07.21
Previous commit log has confusion on version numbers. It was really
3.23.07.19 to 3.23.07.21.
(From now on, avoid picking 4 digit version, they are alpha, thanks Robert Elz)
---------------------
## 003.009.002
* E310: Added support for Speedgrade 3
* B205mini: Added support
* E310: Fixed reference counting bug
* B210: Fixed external clock reference bug for devices using ADF4002 PLLs
* B210: Fixed codec loopback test
* OctoClock: Fixed firmware burning on Windows
* B2XX, E3XX, X3XX: Easier time-syncing features. Fixes bug where B210s would
only run after issuing set_time_unknown_pps().
* X3XX: Fixed bug for IQ imbalance correction
* E310: DRAM testbenching
* Docs/Manual: Many updates and fixes
---------------------
- (Previous commit for the same upgrade was not really done,
GITHUB_TAG was set wrongly, sorry, mef)
- Because of above, PKGREVISION++
- PLIST adjust, remove some tweak for REPLACE_PYTHON stuff
- PLIST correction for with and without doxygen
- Add dependency for py-mako
---------------
TQSL ChangeLog
https://lotw.arrl.org/lotw-help/tqslchangelog/
2.1.3
Revert change in the behavior for command line
applications. TQSL 2.1 changed the behavior for ADIF files
to open those with the TQSL ADIF editor versus signing
them unless "-x" or "-q" were on the command line.
This was an incompatible change that is not consistent
with the documentation and was removed. Fix defect that
could cause newly imported callsign certificates tobe
deleted after the import completed.
Changes:
release 2015.07.2
Bonus release! This release contains fixes for CMake configuration bugs that
affected installation of 2015.07.1 on some platforms.
release 2015.07.1
To upgrade to this release, you must update libhackrf and hackrf-tools on your
host computer. You must also update firmware on your HackRF. It is important
to update both the host code and firmware for this release to work properly.
If you only update one or the other, you may experience unpredictable
behaviour.
Major changes in this release include:
Multiple HackRF support. Users with more than one HackRF can target a
specific device from software using the device serial number. The serial
number is easy to find with hackrf_info. Thanks, Hessu!
Linux kernel module detaching. A work-around to avoid the unofficial HackRF
kernel module in recent kernel versions that has been causing problems for
many users.
Updating the CPLD is now possible from Windows. There is no CPLD update with
this release, but Windows users should now be able to update.
Support for rad1o hardware, the badge of CCCamp 2015 based on HackRF One.
This package contains host software supporting rad1o; for firmware and other
resources, refer to: https://rad1o.badge.events.ccc.de/
There have been many more enhancements and bug fixes, for a full list of
changes, see the git log.
--------------------------
2015-11-26 David Freese <iam_w1hkj@w1hkj.com>
16ede08: flrig xmlrpc
=Version 3.23.06=
3f577d9: WO woes
482d060: Smeter PWRmeter
e08e403: ARQ shutdown
2015-11-20 John Phelps <kl4yfd@gmail.com>
0b5b329: Developer Doxygen and BerliOS clean
- Cleaned and Fixed develo per Doxygen files
- Added GitStats to the Dev Doxygen info
-- run ./scripts/doxygen/gen_doxygen_docs.sh
2015-11-20 David Freese <iam_w1hkj@w1hkj.com>
b19fff8: Documentation
55e0d31: Compiler warnings
Existing SHA1 digests verified, all found to be the same on the
machine holding the existing distfiles (morden). Existing SHA1
digests retained for now as an audit trail.
- (patch-openssl__cert.cpp)
Add patch to define MAX_PATH macro
- Unable to package with x11/wxGTK30 yet
(upstream)
- Udate 2.0.3 to 2.1.2
-----------
TQSL-2.1.2
The following links are pointers to TrustedQSL (TQSL) V2.1.2, which is
a bug fix for the official TQSL 2.1 release.
Release Notes TrustedQSL-2-1-release.pdf
http://www.rickmurphy.net/lotw/TrustedQSL-2-1-release.pdf
---------------
xdx-2.5: Function keys F1 - F8 send often used commands to the cluster.
Close dialog when Ctl-Q is used.
Update manual page to current conventions.
-----------------
Version 3.4:
I fixed a bug in the code that implements the modified GS (scaling)
card. In NEC2 the GS card scales all of the structure, but in Xnec2c I
modified the code so that it is possible to specify a range of tag
numbers to apply scaling to only. When a GS card follows a GX card,
selective scaling doesn't work correctly because a symmetric structure
is created. If you are using a GS card, it may be better to avoid
specifying a tag number range, just in case the bug fix is not
complete.
---------------------
## 003.009.000
* X300: Updated DAC ctrl, FPGA toolchain is now entirely Vivado,
improved master clock controls, added ADC self-cal capability,
prepared for revisions 7 and 8, fixed flow control issue which
could cause device to hang when receiving too many overruns
* B2XX: Auto clock rate setting, added PID/VID pairs to support
all B2XX- and derivatives, added temperature sensor, improved
DC offset and IQ imbalance correction, added AGC support,
support for FPGPIO connector on Rev6+ boards, full clock range support,
updated FX3 firmware (side-channel logging capabilities, updated
tx voltage swing, better configurability), default tick rate now
16 MHz, added B200mini support
* E3XX: Added temperature sensor, FPGA toolchain is now entirely Vivado,
improved DC offset and IQ imbalance correction, added AGC support,
improved FPGA capture interface robustness for RFIC, make frame
sizes configurable, replaced GPS control code with gpsd interfacing
capabilities
* Octoclock: Fixed bootloader + ethernet capabilities
* Compilers: Supported MSVC versions are now 2012, 2013, 2015
(dropped 2010 support), added MinGW capabilities
* Documentation: Many minor fixes and updates, merged all the
info from code.ettus.com
* UHD: Added sid_t, CHDR-specific transports now get their own
(un)packer codes, fixed a lot of compiler warnings, added
filter API (currently available for AD9361 frontend), added
soft-register API, replaced Cheetah with Mako, full Py3k
compliance, updated images downloader tool (now is one tool
for all devices), CMake minimum version is now 2.8, refactored
general AD9361 peripheral management, refactored most core
control management, added usb_error type (used by B2xx devices),
better exception handling at runtime, added C wrapper API,
new dependency: python-requests
* C API: Added to UHD (wraps C++ calls in C)
* multi_usrp: Added normalized gain setters/getters, IQ imbalance
+ DC offset correction API, filter API
* Converters: Converter symbols now exported, better logging,
removed ORC dependency, added u8 converters
* Examples: Whitespace- and other cleanup, multi-channel fixes for
some examples
* Utils: Read more property tree types from the command line
* Tools: kitchen sink updated, added mega_fft
-----------------------
- Changes for xlog version 2.0.13 - 2015-apr-19
* Fixed date in cabrillo3 output to be: yyyy-mm-dd
* Fixed date in EDI output to be: yymmdd
* Fixed QSORecords in EDI output
* Updated cty.dat to 20150420 (cty-2505)
* Fixed Bug #44547: Added JT9 modes
* Fixed Bug #44259: broken dupe checking
- set LICENSE= gnu-gpl-v2
(upstream)
- Update 0.9.30 to 0.9.31.2
----------------------------
2007-12-21 rein couperus <rein@couperus.com>
* changed searchlog.c ('possible calls')
2007-12-18 rein couperus <rein@couperus.com>
* changed cluster_bg.c to fix possible buffer overflow
* changed searchlog.c -> compare now starts at beginning of callsign.
- (File/REPLACE_PYTHON) delete non existent files
- (Makefile)
* CONF_FILES setup deleted (etc files no longer installed,
but found at examples directory now)
* MASTER_SITES updated
* ${DESTDIR} is removed from one of CMAKE_ARGS
-DGR_LIBRARY_DIR=${DESTDIR}${PREFIX}/lib
(upstream)
- Update gnuradio-core from 3.7.6 to 3.7.8
---------------------
ChangLog 3.7.7 to 3.7.8 is not known
Release Note for 3.7.7 is at
http://gnuradio.org/redmine/projects/gnuradio/wiki/ChangeLogV3_7_7
- Drop two patches, seems included
(upstream)
- Update 3.7.2 to 3.8.5
Change Log for Releases
==============================
## 003.008.005
* E3xx: Added support for battery-based E3xx device (E312),
get_freq() for network mode, fixed GPS time initialization bug
* AD9361-based devices: Fixed frequency readback bug
* B200: Fixed DCM issues, better loopback failure handling,
fix erroneous warning for custom clock rates
* X3x0: Better warnings for clock reate / ref freq
* multi_usrp: Added define for GPIO capabilities (enables
exposure in GNU Radio)
* UHD: sc16->sc16 SSE converter
* Manual: Multiple minor updates, FPGA manual improvements,
* Build System: Fixed builds on some Windows platforms, removed
stray prints
## 003.008.004
* B200: Fixed EEPROM writing bug, updated images for B200 Rev5/6
* E300: GPS antenna power defaults to staying on, GPS time used as
default if available
* UBX: PDF frequency fix on X300
* USRP2: Bugfix that allows latest UHD to work with USRP2
* Documentation: Many fixes for E300 section, added FPGA manual
## 003.008.003
* UBX: Fixed phase synchronization issues
(Related changes: Change X300 daughterboard frequency, increase
N210 FIFO depth)
* Fixed many compiler warnings
* B200: Fixed timing issues, fixed tick rate issue, stabilized
operations at high clock rates
* X300: Improved phase alignment across devices
* CMake: Build fixes
* E300: Flow control fix
## 003.008.002
* CMake: Introducing named versions for dev branches, enable static libs,
* E300: Docs updates, compat number bump, VCTCXO updates,
more status bits for ref locking, fixed serial number length fix,
RSSI Sensor
* B200: RSSI sensor
* AD9361: Better handling of different interpolation rates in FIR,
fix for gain value truncation, removed gain value offset
* UBX: Added drivers
* Manual/Docs: Numerous updates, minimum compiler versions now specified,
* Converters: Multiple fixes for sc12
* Examples: Fixes to txrx_loopback_to_file
* Path handling vastly improved, made more consistent
* Minor UHD fixes
## 003.008.001
* B2x0: Fixed PLL settings, Fixed external ref selection, serialized
streamer setup (thread-safety)
* X3x0: Fixed flow control issue, improved DAC ctrl + init logic,
Fixed I/Q alignment issue
* Generation-3 devices: Fixed LED registers
* UHD: Improved tuning logic for manual tunes
* Tools: Multiple kitchen sink fixes, coloured output
* Examples: Multiple bugfixes (multi-channel ops)
* Docs/Manual: Multiple fixes, E310 panel images
## 003.008.000
* Added E310 support
* B200/B210: Moved AD9361 controls from firmware to host
* Added several tools: ZPU dissector, improved CHDR dissector,
kitchen sink, B200/B210 USB debugging utility, latency
measurement tool.
* Reorganized firmware/ directory structure. Refactored some
firmware.
* Removed FPGA sources, is now in own repository (submoduled).
* Cleaned up command line arguments for some tools
* Added math namespace, plus a unified float comparison infrastructure
* Fixed tuning-related bugs
* Moved manual over to Doxygen, also several manual bug fixes and
amendments
* Added many missing virtual destructors (less build warnings)
* Added support for NI-RIO 14.0
* X300 fixes: Not found over PCIe with no eth interfaces
* CMake improvements: Now comes with own UHDConfig.cmake and example
to build standalone UHD apps, build fixes on Apple, interoperability
with GNU Radio
* OctoClock fixes and improvements: Ethernet initialization, external
ref detection, stability fixes, host driver (UHD can now talk to
OctoClock)
* Examples: Improved GPIO example, rx_samples_to_file
* Bumped minimum Boost version to 1.46
## 003.007.003
* Fixed examples
* Removed compiler warnings
* Fixed CBX LO settings (FRAC truncation)
* Fixed build issues for out-of-tree tools for some distros
* Fixed some logging strings (SBX, GPSDO)
* Improved logging (speedups, removed unnecessary cycles)
* Added output sync for DAC reference clocks on X300
* Multiple FPGA improvements, as well as upgrade of build env
* Added support for B200 vs B210 discovery
(from doc/xnec2c.html)
-----------------
Version 3.3:
I fixed a bug that was in the code that reads the commands
from the NEC2 input file, where xnec2c would crash with a
segmentation fault when the FR card was after the RP
card. Also modified the Strtod() function to avoid freeing the
end pointer before it was used, causing problems.
- Following patch added to give sphinx-build name (with ${PYVERSSUFFIX) attached)
gnuradio-core/patches/patch-cmake_Modules_FindSphinx.cmake
- Depending doxygen-1.8.9.1nb1 now
- gnuradio-doxygen is updated 3.7.5.2nb1 to 3.7.6
(upstream)
- Update gnuradio-* from 3.7.5.2 to 3.7.6
---------------------------------------
GNU Radio releases 3.7.6 and 3.7.5.2 are available for download:
(several tens of lines omitted for URL and List of contributors)
Release 3.7.5.2 is a bug-fix only maintenance patch following 3.7.5.1,
and will be the last one for the 3.7.5 release. Release 3.7.6
incorporates all these fixes and adds significant new features.
---------------
(From http://git.osmocom.org/gr-osmosdr/log/)
2014-11-04 update version to 0.1.4 Dimitri Stolnikov
2014-11-03 bladeRF: Don't fail out until 3 consecutive errors have occurred Jon Szymaniak
2014-11-03 bladeRF: Default num_transfers to min(32, num_buffers/2) Jon Szymaniak
2014-11-03 bladeRF: Removed unused bladerf_metadata parameter from rx/tx calls Jon Szymaniak
2014-10-21 hackrf: update copyright for SSE/AVX routines Dimitri Stolnikov
2014-10-21 hackrf: disable AMP gain stage by default to protect it from damage Dimitri Stolnikov
2014-10-21 source/sink: don't discover devices if already specified via args Dimitri Stolnikov
Add PLIST.oss to be anonther removing PLIST other than gnuradio-core packages.
(One more, move the line location of comment lines next to the line to explain)
The explicit use of .so in the shared lib causes a problem.
I've also set UHD_DIR in the environment in the UHD buildlink3.mk file
which should make these two CMAKE_ARGS unnecessary
-----------------------------------------
GNU Radio releases 3.7.6 and 3.7.5.2 are available for download:
( several tens of lines omitted for URL and List of contributors)
Release 3.7.5.2 is a bug-fix only maintenance patch following 3.7.5.1,
and will be the last one for the 3.7.5 release. Release 3.7.6
incorporates all these fixes and adds significant new features.
-----------------------
2014-10-21 GnuRadio 3.7.5.1 is available
http://gnuradio.org/redmine/projects/gnuradio/wiki/ChangeLogV3_7_5_1
audio: Fixes string format bug in ALSA error messages.
blocks: Added callback to vector source GRC bindings
blocks: benchmark scripts using wrong includes.
blocks: convert asserts to throwing runtime errors in keep_m_in_n ctor.
blocks: fixed relative rate in keep_m_in_n. It's m-in-n, not n-in-m.
blocks: fixed up keem_m_in_n to handle relative rate and correct number of items in calls to work.
blocks: removed use of 'and', 'or', and 'not' for &&, ||, and !.
cmake: Additional search path for QWT include files.
cmake: OSS is not for APPLE or WINDOWS.
cmake: Use APPLE, not matching Darwin
cmake: modtool: On Apple only, set install name and use rpath correctly.
cmake: modtool: allow the use of a MODULES_DIR to specify where cmake modules are installed.
cmake: modtool: make sure our local CMake Modules path comes first.
cmake: modtool: update copyright date.
digital: adapt clock recovery QA
digital: applying same fix of the complex M&M clock recovery block as the float vrsion.
digital: clock recovery delete unused variables
digital: clock recovery fix relative limit
digital: clock recovery more verbose documentation
docs: Make explicit we only support Qt4
dtv: fix internal GR component dependencies
fec: qa: fix use of Bool type to be actual boolean Python values
fec: removed ber_tools; unnecessary and not exported. Replaced compber with call to VOLK's popcount.
filter: Fixes setting sample delay declaration for PFB synthesizer in GRC.
filter: Fixes setting sample delay declaration for the PFB channelizer and in GRC.
grc: disable port type caching on init
grc: fix lagging drag and drop
grc: fix missing xterm (Bug #725)
grc: fix search entry box for old PyGTK versions
grc: no icon in search entry box for old PyGTK versions
grc: update all flowgraphs when hiding port labels
grc: yet another py26 incompatibility
qtgui: fixed an issue with the number sink mistreating non-float inputs.
qtgui: increased max tabs from 5 to 20 in tab widget
runtime: fix installation location of the gr_log_default.conf log configuration file.
uhd: removed use of 'and', 'or', and 'not' for &&, ||, and !.
----------------
Version 3.2:
I made some changes to the Strlcat() function and its usage in
the xnec2c code, to improve safe handling of string
concatenation operations. Hopefully this has not broken the
handling of various strings in xnec2c! ;-)
html/gr-trellis.html is installed in share/doc/gnuradio-${PKGVERSION}.
There doesn't seem the way to disable this behavior. So add always-
dependency to textproc/xmlto. Thanks gdt@ for the report.
PKGREVISION++ (binary is different).
- Changes for xlog version 2.0.12 - 2014-apr-01
* Updated cty.dat to 20140331 (cty-2404)
- Changes for xlog version 2.0.11 - 2013-nov-16
* Updated cty.dat to 20131009
* Fixed "Write and Click All"
* Increased log name limit to 30 characters
* Fixed truncated "QSO <number>" label in main window
* Fixed dxcc 3 character callsigns
- Changes for xlog version 2.0.10 - 2013-July-22
* Fix compilation warning in labels.c regarding strptime
* Convert all compilation warnings into errors
* Get rid of the "unused-but-set-variable" warnings
- Changes for xlog version 2.0.9 - 2013-July-20
* Fix month to number conversion for non-English languages in Cabrillo export
(thank you Alex EW1LN for reporting the problem and testing the fix)
* Modify date in TSV file to be ISO 8601 format to aid in spreadsheet import
* Updated cty.dat to 20130625
- Changes for xlog version 2.0.8 - 2013-May-23
* Fix Debian lint issue (config.sub config.guess)
* Merge Debian bug #617374 fix into dxcc.c to avoid segfault
* Fix cabrillo import - incorporate patch from Thomas (DL1JBE) Beierlein
* Updated cty.dat to 20130510
- Changes for xlog version 2.0.7 - 2013-March-31
* Fixed remarks box for Unity et al (bug #38637)
* Updated cty.dat to 20130312 (CTY-2303)
- Changes for xlog version 2.0.6 - 2013-March-01
* First version with new maintainer: Andy Stewart, KB1OIQ
* Updated to Cabrillo v3 format - export and import (bug #37740)
* Added preference setting for "Are You Sure" dialog on exit (bug #37761)
* Updated cty.dat to 20130222 (CTY-2302) (bug #37748)
* Updated to Amateur Data Interchange Format (ADIF) 2.2.7 format (bug #37741)
** Added a large number(!) of modes
** Added the 560m band
* Fixed cosmetic issues with the scoring window (bug #37743)
* Fixed Ubuntu bug #608718: Keyer window displayed, hitting return in RX(RST)
with no call logged bogus QSO.
* Fixed Task #10916 - user preference to save Cabrillo freq or band
* New manual from Chris Story (K6RWJ)
* Entering "callsigns" like "3D2/R" will show proper DXCC entity in scoring
window locator box for all except WAE countries.
(upstream) Update xdx from 2.4.2 to 2.4.3
Changelog for version Xdx (2.4.3)
* Apply Debian patch from bug #577377.
* Bring build system up to date for later versions of Autotools.
* Do not track any build system generated files in Git VCS.
* Modify source as needed for clean build with Gtk+ 2.24.
* New upstream maintainer, Nate Bargmann, N0NB <n0nb@n0nb.us>
* Development hosted at https://github.com/N0NB/xdx
* Portuguese translation update from David, CT1DRB
* Add support to load updated country file using command line option,
environment variable, or placing cty.dat in the preferences directory.
* Fix URI handling for GTK+ 2.24 and later.
* Disable function keys for this release.
2014-10-19 David Freese <w1hkj@w1hkj.com>
9bbef87: Macro Buttons
b123fc1: Thumb drive
01bc010: Power Squelch
e7de40b: Documentation update
287e692: TxID control via xmlrpc
880df3d: Analysis modem
2014-10-17 John Phelps <kl4yfd@gmail.com>
91bda2b: Gray-mapped 8PSK and soft-decision
- Upgraded 8psk to Gray mapped constellation
- Implemented Soft-Decision decoder based on Gray constellation
- Even when the received phase is distorted by +- 1 phase-position:
- One of the bits is still known with 100% certianty.
- Only up to 1 bit can be in error.
- Increased gain for noisy/weak/HF channels
2014-10-16 Robert Stiles <kk5vd@yahoo.com>
60c78c0: XMLRPC Character measurement issues with 8PSK modems
2014-10-16 David Freese <w1hkj@w1hkj.com>
5040224: View/Hide Smeter
d103209: CW matched filter
ea853a8: flarq update
e7d9cc4: 8PSK/16PSK modes
6fcf11d: KISS interface
=Version 3.22.00=
a798037: Remove Mixer controls
f3f8c9a: FTextDisplay
674da9c: Freq Control
bfb001b: Touch Screen UI
d7bb247: UI macrobars
cad1c86: VSP boolean
2014-10-06 Robert Stiles <kk5vd@yahoo.com>
c4bfed9: Tabulated Widgets Font/Font Size Changes
80dc81b: Documentation
2014-10-06 David Freese <w1hkj@w1hkj.com>
1dd39cc: PACKAGE_PROJ
98cd7af: Win32 warnings
93b76d4: UI tweaks
ec3177b: Hide Packet Modem
9f2b358: Record loader
bbce20e: Delta macro
38d9bab: MEMMAP
3ef0433: WF drop rate
7448535: RsID time out
03ef903: Wizard crash fix
2014-10-06 Stelios Bounanos <vcs@enotty.net>
d7fe297: Fix log format string warnings
382452a: Build system fixes
2014-10-06 David Freese <w1hkj@w1hkj.com>
4ad7967: Default font
632eb8a: Power meter
1bf6f49: Smeter
73cdc07: regex.c fix
eb3eb25: fft-scan
5176ffb: home directory
830a1cb: Analysis modem
38d1589: TRX limit check
a0f43c9: Win32 Socket::close
cf16c3a: SITORB tx issue
2014-08-29 Robert Stiles <kk5vd@yahoo.com>
67a744b: Doxygen Inclusion
2014-08-29 David Freese <w1hkj@w1hkj.com>
82aeba5: ARQ stx handshake
4503c99: Virtual ports
d40998f: New User Exit Behavior
Version 3.1:
I have made several changes to the code that renders wire frame
drawings and displays some data, like the projection parameters
(azimuth and elevation of the structure and the radiation pattern) and
gain values. This has resulted in a faster and smoother animation of
these drawings and reduced workload on the processor during dragging
of these images. I have also reduced the default minimum size of
xnec2c's windows, as I had reports that they would not fit in the
displays of some laptops or monitors, with resolutions on the lower
side.
