Set license.
Changes since 2.32.44:
* Improvement to the code for resuming directory transfers: (1) make sure file information (permissions, ...) has been properly set when using a previously transferred temp file (2) make sure previously transferred directories are writable (other changes made in the developer version of Unison require a protocol change)
* Got rid of the 16MiB marshalling limit by marshalling to a bigarray
* Ignore one hour differences for deciding whether a file may have been updated. This avoids slow update detection after daylight saving time changes under Windows. This makes it slightly more likely to miss an update, but that should be safe enough.
* Improved Unison icon under Windows
* Case sensitivity information put in the archive (in a backward compatible way) and checked when the archive is loaded
* Uses improved emulation of "select" call provided by Ocaml 3.11 under Windows (the GUI does not freeze as much during synchronization)
* Upgraded to GPL version 3 and added copyright notice to documentation files.
* Unison can sometimes fail to transfer a file, giving the unhelpful message "Destination updated during synchronization" even though the file has not been changed. This can be caused by programs that change either the file's contents *or* the file's extended attributes without changing its modification time. I'm not sure what is the best fix for this – it is not Unison's fault, but it makes Unison's behavior puzzling – but at least Unison can be more helpful about suggesting a workaround (running once with 'fastcheck' set to false). The failure message has been changed to give this advice.
* Text UI
o During update detection, display status by updating a single line rather than generating a new line of output every so often. That should be less confusing.
o In repeat mode, don't save the archives when there is no update. Indeed, in this mode, we should minimize the amount of work performed and it is unlikely that the archives have changed much.
* Bugfixes
o Fixed quotation of paths and names when writing to a preference file
o Fixed bug resulting in slow performances when transferring a file using our rsync implementation from a 64-bit architecture to a 32-bit architecture.
o Fixed bug in Lwt_unix.run which could make it fail with a Not_found exception (see [Not_found raised in tryCopyMovedFile] errors)
o Properly deals with non-conformant AppleDouble files produced by Mac OS X.
o Fixed bug that results in Unison missing ressource fork changes
o Applied a patch from Karl M to make the GTK2 version build with OCaml 3.11 on Windows.
o Added some extra debugging code to remote.ml to give more informative error messages when people encounter the longstanding "assert failed during file transfer" bug.
o Applied patch from Antoine Reilles for NetBSD compilation
o Resizing the update window vertically no longer moves the status label. Fix contributed by Pedro Melo.
Changes since 2.31:
* Minor fixes and improvements:
o Ignore one hour differences when deciding whether a file may have been updated. This avoids slow update detection after daylight saving time changes under Windows. This makes Unison slightly more likely to miss an update, but it should be safe enough.
o Fix a small bug that was affecting mainly windows users. We need to commit the archives at the end of the sync even if there are no updates to propagate because some files (in fact, if we've just switched to DST on windows, a LOT of files) might have new modtimes in the archive. (Changed the text UI only. It's less clear where to change the GUI.)
o Don't delete the temp file when a transfer fails due to a fingerprint mismatch (so that we can have a look and see why!) We've also added more debugging code togive more informative error messages when we encounter the dreaded and longstanding "assert failed during file transfer" bug
Changes since 2.27:
* If Unison is interrupted during a directory transfer, it will now leave the partially transferred directory intact in a temporary location. (This maintains the invariant that new files/directories are transferred either completely or not at all.) The next time Unison is run, it will continue filling in this temporary directory, skipping transferring files that it finds are already there.
* We've added experimental support for invoking an external file transfer tool for whole-file copies instead of Unison's built-in transfer protocol. Three new preferences have been added:
o copyprog is a string giving the name (and command-line switches, if needed) of an external program that can be used to copy large files efficiently. By default, rsync is invoked, but other tools such as scp can be used instead by changing the value of this preference. (Although this is not its primary purpose, rsync is actually a pretty fast way of copying files that don't already exist on the receiving host.) For files that do already exist on (but that have been changed in one replica), Unison will always use its built-in implementation of the rsync algorithm.
o Added a "copyprogrest" preference, so that we can give different command lines for invoking the external copy utility depending on whether a partially transferred file already exists or not. (Rsync doesn't seem to care about this, but other utilities may.)
o copythreshold is an integer (-1 by default), indicating above what filesize (in megabytse the external copying utility specified by copyprog. Specifying 0 will cause ALL copies to use the external program; a negative number will prevent any files from using it. (Default is -1.)
Thanks to Alan Schmitt for a huge amount of hacking and o an anonymous sponsor for suggesting and underwriting this extension.
* Small improvements:
o Added a new preference, dontchmod. By default, Unison uses the chmod system call to set the permission bits of files after it has copied them. Butin some circumstances (and under some operating systems), the chmod call always fails. Setting this preference completely prevents Unison from ever calling chmod.
o Don't ignore files that look like backup files if the backuplocation preference set to central
o Shortened the names of several preferences. The old names are also still supported, for backwards compatibility, but they do not appear in the documentation.
o Lots of little documentation tidying. (In particular, preferences are separated into Basic and Advanced! This should hopefully make Unison a little more approachable for new users.
o Unison can sometimes fail to transfer a file, giving the unhelpful message "Destination updated during synchronization"
#
* Further improvements to the OS X GUI (thanks to Alan Schmitt and Craig Federighi).
# Very preliminary support for triggering Unison from an external filesystem-watching utility. The current implementation is very simple, not efficient, and almost completely untested—not ready for real users. But if someone wants to help improve it (e.g., by writing a filesystem watcher for your favorite OS), please make yourself known!
On the Unison side, the new behavior is very simple:
* use the text UI
* start Unison with the command-line flag "-repeat FOO", where FOO is name of a file where Unison should look for notifications of changes
* when it starts up, Unison will read the whole contents of this file (on both hosts), which should be a newline-separated list of paths (relative to the root of the synchronization) and synchronize just these paths, as if it had been started with the "-path=xxx" option for each one of them
* when it finishes, it will sleep for a few seconds and then examine the watchfile again; if anything has been added, it will read the new paths, synchronize them, and go back to sleep
* that's it!
To use this to drive Unison "incrementally," just start it in this mode and start up a tool (on each host) to watch for new changes to the filesystem and append the appropriate paths to the watchfile. Hopefully such tools should not be too hard to write.
# Bug fixes:
* Fixed a bug that was causing new files to be created with permissions 0x600 instead of using a reasonable default (like 0x644), if the 'perms' flag was set to 0. (Bug reported by Ben Crowell.)
* Follow maxthreads preference when transferring directories.
for the selected interface(s). vnStat isn't a packet sniffer. vnStat can be
used even without root permissions.
vnStat is focused on being small, simple and stable.
* Rebuilt OpenVPN Windows installer with OpenSSL 0.9.8l to address
CVE-2009-3555. Note that OpenVPN has never relied on the session
renegotiation capabilities that are built into the SSL/TLS protocol,
therefore the fix in OpenSSL 0.9.8l (disable SSL/TLS renegotiation
completely) will not adversely affect OpenVPN mid-session SSL/TLS
renegotation or any other OpenVPN capabilities.
* Added additional session renegotiation hardening. OpenVPN has always
required that mid-session renegotiations build up a new SSL/TLS
session from scratch. While the client certificate common name is
already locked against changes in mid-session TLS renegotiations, we
now extend this locking to the auth-user-pass username as well as all
certificate content in the full client certificate chain.
* Changes in ekiga 3.2.6 (2009-09-22)
** User-visible fixes
- Fixed crashes shown as assertion failed in /usr/include/ptlib/safecoll.h:813
- Fixed crash when device list is empty or contains non-latin1 characters
- Fixed crash when pressing shift-f10 (popup menu) in Preferences window
- Fixed possible crash when garbage collecting REGISTER requests
- Fixed possible segfault when receiving a NOTIFY
- Fixed freeze by preventing SIP handlers retry timer from executing
during destruction
- Fixed freeze during packet write
- Fixed "Lockup after a day of idle" in publishing code
- Fixed various deadlocks in the OPAL subscription code
- Added "%limit" workaround for registrars which refuse several
contacts during registration
- Fixed "Contacts never go offline"
- Fixed "New SIP account mangles fields if Authentications User is empty"
- Make sure the output device is set before a call
- Fixed port handling when registering to a proxy with a non-standard port
- Fixed "In some circumstances, smileys are not displayed graphically"
- Improved audio latency when not collecting all of the audio data
- Fixed the newmessage.wav file
- Fixed "Accounts were automatically active after editing them"
- Make possible to register e.g. user@a.b as user name as required by
some providers
- Remove deprecated "Encoding" field from desktop file
** Protocol fixes
- Fixed problem with REGISTER IntervalTooBrief response handling not
using correct interface for new transaction
- Fixed "480 Temporarily Unavailable" response handling
- Fixed problem with doing DNS lookup when using explicit proxy or
presence agent
- Fixed problem with PUBLISH using wrong expiry after Interval Too Brief
error
- If we find no authentication information when subscribing, keep trying
as it could become available at a later stage
- Changed so does not put both global and media specific connection
addresses in SDP if they are the same (needed for freephonie SIP
registrar)
- Fixed support for unusual SIP "start with hold", that is an initial
offer INVITE with a connection address of 0.0.0.0
- Fixed failure to retry (after a suitable period) REGISTER/SUBSCRIBE
if get transport level timeout
- Added closing of our local media streams if remote sends a re-INVITE
and leaves out streams (e.g. video) that were there previously
- Fixed problems when can not bind to any interface
- Fixed various problems with some SDP options
- Fixed regression where the username would be lost from the Contact
field
- Fixed invalid request-uri in BYE request
- Fixed issue with overlapping INVITEs
- Fixed H.263-1998 plug in compilation, by asking latest avcodec
- Fixed "OpalBitRateCalculator limits bitrates"
- Fixed "SIP wrong response on a failed REFER-request"
- Fixed "SIP: OK response to CANCEL incomplete"
- Do not send "100 Trying" message when receiving a NOTIFY message
- Fixed incorrect register/subscribe refresh timer calculation
** Build fixes
- Support building on kFreeBSD
- Fixed problem with moving libsoup api
- Various fixes for SIP and H323 configuration
- Fixed "A build error when generating SunAudio ptlib plugin"
- Fixed "The video convertor of YUY2toYUV420P in ptlib does not work"
- Fixed "The absence of libv4l2 should not block V4L2 ptlib plugin"
- and other minor changes
** Windows port fixes
- Thanks to Michael Rickmann's continuous work, Windows port has
reached a quality almost comparable to GNU/Linux version. We invite
people to test it, see ekiga wiki. Some improvements:
- shortened audio delay
- DirectX video input and output
- device name handling
- fixed audio volume
- fixed building with mingw
- made so the linker doesn't find main on win32
- Keep the output sound volume across calls
** Distributor-visible changes
- Changed default for AVC plug in to be disabled until someone fixes
the plug in
- Note: Pulse audio server does not play nicely with ekiga, very high
latencies are noticed
** Translation fixes
- Updated translations: ar, bn, et, ga, hi, hu, ko, lt, ml, nb, sr,
sr@latin, uk, zh_HK, zh_TW
- New translations: ca@valencia
- Updated help translations: de
Changelog:
* Ctrl-Tab and Ctrl-Shift-Tab to cycle tabs now loop around if reaching the end of the tab list
* Fix crash on showing/hiding of directory trees after closing a tab
* Tabs no longer become unresponsive if not approving to close a busy tab
* Directory comparison did not work properly on all but the first tab
* Fix spurious error messages if connecting to a new site while synchronized browsing is enabled
* *nix: Work around a bug in KDE preventing restore from minimize to notification area
* Do not show update dialog if there is already some other dialog open
* Fix synchronized browsing option on site-specific bookmarks
--- 3.0.50 2009/11/02
Add support for extra request / response data for SRU codecs and GFS.
The Z_SRW_PDU structure has two new members extraResponseData_{buf,len}
for extra data response buffer and length. For the GFS, both request
and response data (XML) is carried in extra_args and extra_response_data
for the search handler. Patch by Ko van der Sloot.
ZOOM: For queries that cannot be converted to the specified rpnCharset,
ZOOM now returns a diagnostic on the client-side ('invalid query' /
10010). This fixes bug #2113.
yaz-client fix: If cmdfile is passed to yaz-client (option -f) and that
cmdfile included a 'quit' command that would result in a memory violation.
Changes in version 0.2.1.20 - 2009-10-15
o Major bugfixes:
- Send circuit or stream sendme cells when our window has decreased
by 100 cells, not when it has decreased by 101 cells. Bug uncovered
by Karsten when testing the "reduce circuit window" performance
patch. Bugfix on the 54th commit on Tor -- from July 2002,
before the release of Tor 0.0.0. This is the new winner of the
oldest-bug prize.
- Fix a remotely triggerable memory leak when a consensus document
contains more than one signature from the same voter. Bugfix on
0.2.0.3-alpha.
- Avoid segfault in rare cases when finishing an introduction circuit
as a client and finding out that we don't have an introduction key
for it. Fixes bug 1073.
o Major features:
- Tor now reads the "circwindow" parameter out of the consensus,
and uses that value for its circuit package window rather than the
default of 1000 cells. Begins the implementation of proposal 168.
o New directory authorities:
- Set up urras (run by Jacob Appelbaum) as the seventh v3 directory
authority.
- Move moria1 and tonga to alternate IP addresses.
o Minor bugfixes:
- Fix a signed/unsigned compile warning in 0.2.1.19.
- Fix possible segmentation fault on directory authorities. Bugfix on
0.2.1.14-rc.
- Fix an extremely rare infinite recursion bug that could occur if
we tried to log a message after shutting down the log subsystem.
Found by Matt Edman. Bugfix on 0.2.0.16-alpha.
- Fix an obscure bug where hidden services on 64-bit big-endian
systems might mis-read the timestamp in v3 introduce cells, and
refuse to connect back to the client. Bugfix on 0.2.1.6-alpha.
- We were triggering a CLOCK_SKEW controller status event whenever
we connect via the v2 connection protocol to any relay that has
a wrong clock. Instead, we should only inform the controller when
it's a trusted authority that claims our clock is wrong. Bugfix
on 0.2.0.20-rc; starts to fix bug 1074.
- We were telling the controller about CHECKING_REACHABILITY and
REACHABILITY_FAILED status events whenever we launch a testing
circuit or notice that one has failed. Instead, only tell the
controller when we want to inform the user of overall success or
overall failure. Bugfix on 0.1.2.6-alpha. Fixes bug 1075.
- Don't warn when we're using a circuit that ends with a node
excluded in ExcludeExitNodes, but the circuit is not used to access
the outside world. This should help fix bug 1090. Bugfix on
0.2.1.6-alpha.
- Work around a small memory leak in some versions of OpenSSL that
stopped the memory used by the hostname TLS extension from being
freed.
o Minor features:
- Add a "getinfo status/accepted-server-descriptor" controller
command, which is the recommended way for controllers to learn
whether our server descriptor has been successfully received by at
least on directory authority. Un-recommend good-server-descriptor
getinfo and status events until we have a better design for them.
Changes from 2.50 include:
* TFTP supports Windows/Dos \ separator.
* Warn if IP duplicated in /etc/ethers
* Test upstream responsiveness to work around upstream server slowdowns
* PXE and relay agent fixes
- autoconfig glue to detect presence of termios.h etc.
- On NetBSD default to getpass. Otherwise implement the password reading
using termios.h if present, falling back to getpassphrase/getpass or
plain fgets.
a tun device and subnet topology, OpenVPN insisted on setting a broadcast
address on the tun device, causing a fatal error. This patch fixes that,
and has been submitted upstream
Changelog:
Aborting a previous connection attempt by establishing a new connection in the same tab no longer renders the new connection unusable
*nix: Quote filenames containing spaces if editing using default editor for text files
*nix: Fix crash while emitting queue finished notifications
*nix: Display desktop notification if all transfers have finished and FileZilla isn't focused
Navigating controls inside tab using tabulator key now works on all tabs
Fix splitter positions on horizontal interface layouts
Give choice to abort old connection or to open a new tab when trying to connect while already connected
Double-click on empty space in tabbar opens new tab
Middle-click on tab closes it
Use splitter positions and filelist column setup of previous tab when opening new one
Make betas and release candidates check daily for new versions
Fix crash when leaving settings dialog after tabs have been closed
Fix crash on changing tabs if old tab has site-specific bookmarks but new one doesn't
Layout of tabs no longer changes after leaving settings
Fix issues with remembering last used server
Don't use bold font for active tab
Recursive operations now working in all tabs
Tabbed interface to connect to multiple server at the same time
New welcome screen
Add Open to local directory tree context menu
Fix mismatch of displayed and actually performed default file exists action
MSW: Update mingwm10.dll to fix a crash at initialization
MSW: FTP over TLS no longer crashes for users of VIA CPUs
*nix: Fix crashes due to race condition in dbus code
Fix SHA-512 calculating incorrect hashes on 64bit systems, used by SFTP and the update wizard
Upstream changes:
0.99 - Tue Oct 20 2009
- (je) Support for callback to catch unparsable lines.
- (je) Keep a counter of unparsable lines after parsing.
- (je) Support new record types (SRV, TXT, RP, HINFO, LOC).
- (je) Automatic un/escaping of special characters.
- (je) Reformat regular expressions for clarity.
- (je) Update file open syntax.
- (je) Require Perl 5.6+.
- (je) Support for Unicode names (bug 27527).
- (je) Support TXT records containing a semicolon (bug 50165).
- (je) Support backslashes in zone data (bug 12679).
- (je) Support SRV records (bug 24402).
- (je) Support names ending in what looks like a record type (bug 39006).
- (je) Increase unit test coverage.
- (je) Improve parsing for lines containing comments.
- (je) Improve parsing for multi-line records.
0.98 - Skipped
0.97 - Skipped
* Bug #236: Allow RRs before the SOA in a zonefile.
* Bug #229: Remove the C99 code.
* Bug #253: Don't put NS RRs in a response with QTYPE=DNSKEY.
* Bug #263: Make TSIG algorithm comparison case insensitive.
* Bug #266: Build failed on systems without strptime.
* Fix install hickup.
* Fix to use 4096 EDNS limit for IPv6 on Linux.
KDE 4.3.3 has a number of improvements that will make your life just a
little bit better. Some of KWin's effects have been smoothed and freed
of visual glitches, JuK should now be more stable, KDE PIM has seen its
share of improvements while in the back-rooms of KDE, the developers are
working hard on porting all applications to the new Akonadi storage and
cache.
2009-06-19 Bob Halley <halley@dnspython.org>
* (Version 1.7.1 released)
2009-06-19 Bob Halley <halley@dnspython.org>
* DLV.py was omitted from the kit
* Negative prerequisites were not handled correctly in _get_section().
2009-06-19 Bob Halley <halley@dnspython.org>
* (Version 1.7.0 released)
2009-06-19 Bob Halley <halley@dnspython.org>
* On Windows, the resolver set the domain incorrectly. Thanks
to Brandon Carpenter for reporting this bug.
* Added a to_digestable() method to rdata classes; it returns the
digestable form (i.e. DNSSEC canonical form) of the rdata. For
most rdata types this is the same uncompressed wire form. For
certain older DNS RR types, however, domain names in the rdata
are downcased.
* Added support for the HIP RR type.
2009-06-18 Bob Halley <halley@dnspython.org>
* Added support for the DLV RR type.
* Added various DNSSEC related constants (e.g. algorithm identifiers,
flag values).
* dns/tsig.py: Added support for BADTRUNC result code.
* dns/query.py (udp): When checking that addresses are the same,
use the binary form of the address in the comparison. This
ensures that we don't treat addresses as different if they have
equivalent but differing textual representations. E.g. "1:00::1"
and "1::1" represent the same address but are not textually equal.
Thanks to Kim Davies for reporting this bug.
* The resolver's query() method now has an optional 'source' parameter,
allowing the source IP address to be specified. Thanks to
Alexander Lind for suggesting the change and sending a patch.
* Added NSEC3 and NSEC3PARAM support.
2009-06-17 Bob Halley <halley@dnspython.org>
* Fixed NSEC.to_text(), which was only printing the last window.
Thanks to Brian Wellington for finding the problem and fixing it.
2009-03-30 Bob Halley <halley@dnspython.org>
* dns/query.py (xfr): Allow UDP IXFRs. Use "one_rr_per_rrset" mode when
doing IXFR.
2009-03-30 Bob Halley <halley@dnspython.org>
* Add "one_rr_per_rrset" mode switch to methods which parse
messages from wire format (e.g. dns.message.from_wire(),
dns.query.udp(), dns.query.tcp()). If set, each RR read is
placed in its own RRset (instead of being coalesced).
2009-03-30 Bob Halley <halley@dnspython.org>
* Added EDNS option support.
2008-10-16 Bob Halley <halley@dnspython.org>
* dns/rdtypes/ANY/DS.py: The from_text() parser for DS RRs did not
allow multiple Base64 chunks. Thanks to Rakesh Banka for
finding this bug and submitting a patch.
2008-10-08 Bob Halley <halley@dnspython.org>
* Add entropy module.
* When validating TSIGs, we need to use the absolute name.
2008-06-03 Bob Halley <halley@dnspython.org>
* dns/message.py (Message.set_rcode): The mask used preserved the
extended rcode, instead of everything else in ednsflags.
* dns/message.py (Message.use_edns): ednsflags was not kept
coherent with the specified edns version.
2008-02-06 Bob Halley <halley@dnspython.org>
* dns/ipv6.py (inet_aton): We could raise an exception other than
dns.exception.SyntaxError in some cases.
* dns/tsig.py: Raise an exception when the peer has set a non-zero
TSIG error.
--- 3.0.49 2009/10/01
Make a number of functions defined in xmlquery.c static. These have
never been declared in a public header file (yaz/xmlquery.h) and was
made public by mistake.
Improve speed of character conversions (iconv utilities). This makes
conversions from MARC-8 faster.
ZOOM_record_get returns 0 pointer if a MARC record can not be decoded -
unless type desired is "raw". This will prevent type "xml" from
returning ISO2709 .. Which obviously can not be XML parsed.
Fix memory leak in ZOOM that would occur if option apdulog was used
on a re-used connection.
Frontend server logs HTTP requests.
Frontend server now sends Z39.50 close when it times out (sesssion has
been idle for too long). Versions 2.0.30 and earlier also sent close.
But due to a mistake this was disabled in all versions after that, i.e.
the server would just close the socket immediately.
yaz-client emits a better message when receiving an unrecognised
userInformationField.
Skip zero-length subfields when decoding ISO2709. This rare case happens
if a record has two FS characters in a sequence. Without this patch
there would be a reference beyond char array in using_code_len fragments
in marcdisp.c.
Fix yaz-marcdump error that would occur if option -n was used (bug #3028).
below).
** Mailing list MOVED to bug-wget@gnu.org
** SECURITY FIX: It had been possible to trick Wget into accepting
SSL certificates that don't match the host name, through the trick of
embedding NUL characters into the certs' common name. Fixed by Joao
Ferreira <joao@joaoff.com>.
** Added support for CSS. This includes:
- Parsing links from CSS files, and from CSS content found in HTML
style tags and attributes.
- Supporting conversion of links found within CSS content, when
--convert-links is specified.
- Ensuring that CSS files end in the ".css" filename extension,
when --convert-links is specified.
CSS support in Wget is thanks to Ted Mielczarek
<ted.mielczarek@gmail.com>.
** Added support for Internationalized Resource Identifiers (IRIs, RFC
3987). When support is enabled (requires libidn and libiconv), links
with non-ASCII bytes are translated from their source encoding to UTF-8
before percent-encoding. IRI support was added by Saint Xavier
<wget@sxav.eu>, as his project for the Google Summer of Code.
** Wget now provides more sensible exit status codes when downloads
don't proceed as expected (see the manual).
** --default-page option (and associated wgetrc command) added to
support alternative default names for index.html.
** --ask-password option (and associated wgetrc command) added to
support password prompts at the console.
** The --input-file option now also handles retrieving links from
an external file.
** The output generated by the --version option now includes
information on how it was built, and the set of configure-time options
that were selected.
** --html-extension has been renamed to --adjust-extension, to reflect
the fact that it now also applies to CSS content. --html-extension is
still acceptable, but is now deprecated.
** An "ascii" specifier is now accepted by --restrict-file-names, which
forces the percent-encoding of all non-ASCII bytes
** Several previously existing, but undocumented .wgetrc options are
now documented: save_headers, spider, and user_agent,
auth_no_challenge, and keep_session_cookies. Also added documentation
for the "lowercase" and "uppercase" values for --restrict-file-names, which had been present since Wget 1.11.
2009/10/23: version 3.0.1 = tag release-3-0-1
6961: BT: Fix torrent parsing when announce-list is empty
2009/10/22
6959: DC: Fix invalid XML (lucasn)
6804: EDK: Log incoming chat messages with ip:port info (Dennis Nezic)
6772: New option max_result_name_len, shortens strings in
HTML/Telnet search results
6958: EDK: Fix server connects on Solaris due to missing SO_KEEPALIVE
6957: Configure: Make Ocaml 3.11.1 the default compiler
6956; BT: Fix download of torrent files with no 'announce' field (Hose Bag)
2009/02/28
6759: HTML: Properly sort column hits in Options, IP blocking
Cntlm is an NTLM/NTLMv2 authenticating HTTP proxy. It takes the address of your
proxy or proxies (host1..N and port1..N) and opens a listening socket,
forwarding each request to the parent proxy (moving in a circular list if the
active parent stops working). Along the way, a connection to the parent is
created anew and authenticated or, if available, previously cached connection
is reused to achieve higher efficiency and faster responses. When the chain is
set up, cntlm should be used as a proxy in your applications. Cntlm also
integrates transparent TCP/IP port forwarding (tunneling) through the parent
(incl. authentication).
It can be used against most ISA servers, and helps to provide ease of
integration for programs not supporting NTLM authentication directly, via
cntlm's builtin SOCKS5 proxy.
libtrace 3.0.6 (2008-11-27)
* Fixed compilation errors caused by missing #includes (r1382)
* Added trace_get_payload_from_pppoe() to external API (r1383)
* autoconf now correctly detects libgdc properly for tracertstats (r1384)
* Fixed some warnings on recent versions of gcc (r1385)
- Add support for any number of custom download values identified by
string keys.
d.set_custom=key,value
d.get_custom=key (returns "" if not set)
d.get_custom_throw=key (returns error if not set)
- With this patch, rtorrent will detect and complain about .torrent
files with broken bencode representation (e.g. where the order of
dictionary keys is not lexicographic).
- Choose a different poll type using the RTORRENT_POLL env. variable
(if it's implemented), probably only useful as RTORRENT_POLL=select.
- Add the commands execute_capture and execute_capture_nothrow that
work like their other counterparts but return the OUTPUT (stdout) of
the given command.
- Fixes the code that detects which peer was sending bad data. Peers
are then automatically banned after sending three bad chunks.
- Stops rtorrent from always creating and resizing ALL files, even
those set to "off". Files will still be created, but with a size of
zero, until a part of them is getting downloaded. This helps with
filesystems that don't support sparse files (such as FAT, HFS+, and
others).
- Fix inefficient piece distribution due to linear chunk request
strategy by randomizing position every few (on average 32) chunks, see
ticket #190.
- Enable custom throttles, both per-download or per-IP. See
http://libtorrent.rakshasa.no/ticket/20 for info and instructions.
- Fix crashes/errors due to rtorrent attempting to pass non-utf-8
strings to xmlrpc.
- Added support for using posix_fallocate on newly resized files.
- Include locally available chunks in the "chunks seen" statistics for
completed/distributed copies. Patch by Josef Drexler.
- Added 'd.get_bitfield' command for retrieving the bitfield in hex
format. Patch by Thomas Rosner.
- Fixed include headers for gcc-4.4.0. Patch by 'kloeri'.
- The following vulnerabilities have been fixed. See the security
advisory for details and a workaround.
o The Paltalk dissector could crash on alignment-sensitive
processors. (Bug 3689)
Versions affected: 1.2.0 to 1.2.2
o The DCERPC/NT dissector could crash.
Versions affected: 0.10.10 to 1.2.2
o The SMB dissector could crash.
Versions affected: 1.2.0 to 1.2.2
- The following bugs have been fixed:
o Wireshark memory leak with each file open and/or display
filter change. (Bug 2375)
o DHCP Dissector displays negative lease time. (Bug 2733)
o Invalid advertised window line on tcptrace style graph. (Bug
3417)
o SMB get_dfs_referral referral entry is not dissected
correctly. (Bug 3542)
o Error dissecting eMule sourceOBFU message. (Bug 3848)
o Typos in Diameter XML files. (Bug 3878)
o RSL dissector for MS Power IE is broken. (Bug 4017)
o Manifest problem in 1.2.2 Win64 build. (Bug 4024)
o FIP dissector throws assertion. (Bug 4046)
o TCAP problem with indefinite length 'components' SEQ OF. (Bug
4053)
o GSM MAP: an-APDU not decoded. (Bug 4095)
o Add "Drag and Drop entries..." message on Columns preferences
page. (Bug 4099)
o Editcap -t and -w option parses fractional digits incorrectly.
(Bug 4162)
- Updated Protocol Support
DCERPC NT, DHCP, Diameter, E.212, eDonkey, FIP, IPsec, MGCP, NCP,
Paltalk, RADIUS, RSL, SBus, SMB, SNMP, SSL, TCP, Teamspeak2, WPS
Version 1.2.6.
-- msdl
* 12th release
* -o chain enabled, you can do
$ msdl -o 1.foo -o 2.foo -o 3.foo http://bar/file1http://bar/file2http://bar/file3
* --stream-timeout option for quit streaming after some time.
$ msdl --stream-timeout 3m30s rtsp://foo.com/bar.wmv
to download the first 3 and a half minutes.
This is helpful for downloading the real-time streaming, which ignores
RTSP Range parameters.
* waitip is enabled when running on a single interface.
* Classless Static Routes are now enabled by default in dhcpcd.conf
instead of being always being requested.
