- Still more Direct3D and DirectSound improvements
- Inter-process clipboard support
- Locale handling improvements
- More progress on the kernel/ntdll separation
- Lots of bug fixes
Highlights since last 1.2.5 release:
------------------------------------
* new HiFi sound (you may en/disable it in the UI)
* new cycle-exact Antic emulation
* "H:" emulation complete (including subfolders)
* Paged memory implementation (fast XE bank-switching)
* new configuration file name and location ($HOME/.atari800.cfg)
NetBSD/{i386,powerpc}, so that packages fail properly, rather than
allowing make to fail. e.g.
===> PanoTools-2.6b1nb1 requires compat_linux, which is not available for SunOS-5.9-sparc
===> PanoTools-2.6b1nb1 is not available for SunOS-5.9-sparc
noted by martin.
are updated too
change created etc/vmware/config to include "xkeymap.usekeycodeMapIfXFree86 =
true", so that the keyboard mapping would work correctly
list of changes isn't available, presumably bugfixes only
change the package version to 3.2.1.1 to accomodate introduction of teeny
version number by VMware
list of changes isn't available, presumably bugfixes only
Changes since 1.11 include:
** General changes
- Added -autoload switch which acts like -autostart but without
actually starting the program.
- It is possible to use the printer emulation without switching off
true drive emulation now.
** C64 changes
- Mouse emulation should work again.
- Improved trap emulation compatibility.
** C128 changes
- Fixed some VDC crashs.
- Added support for national firmware and keyboard mappings.
- Implemented fast IEC bus.
** PLUS4 changes
- New emulator. Currently it contains many bugs and several features
are missing. Do not send any bug reports for now.
** VIC-II
- Fixed some raster interrupt emulation bugs.
- Some minor NTSC fixes.
- Reset should properly reset the VIC-II now.
** SID changes
- The ReSID state is saved in snapshots now.
** Drive changes
- Improved GCR sync detection.
- Added some more jobcodes to the 1581 emulation.
- RAM mirrors are properly emulated now.
Changes since 0.69.1 includes:
- Almost everything from MAME 0.70
- Fixed the handling of leading zeros in the fractional part of a float
in src/unix/snprintf.c. (Chris Kirmse)
Changes since 0.69.1 includes:
- Almost everything from MESS 0.70
- Fixed the default values for -sysinfo_file and -messinfo_file, which
were missing a '/'.
- Fixed the handling of leading zeros in the fractional part of a float
in src/unix/snprintf.c. (Chris Kirmse)
version 1.0:
- fixed the problem with Ticks getting incremented on every interrupt, not
just 60Hz (e.g. moving the mouse made the caret blink faster)
- Unix: integrated JIT compiler for Linux/x86 and FreeBSD/x86
- Unix: moved minimum autoconf support to 2.52+
- Unix: add large file support for 2+ GB hard disk images
- Unix: cleaned up pthread attributes [Brian Johnson]
- Unix: fixed floppy problems under Linux
- Unix: implemented "ignoresegv" feature on Linux/x86, Linux/ppc, Darwin/ppc
- Unix: serial port baud rates are now set correctly
- Unix: it is now possible to make the serial drivers pipe their input/output
to programs by using a '|' followed by a command line as the modem or
printer port setting (instead of a device name like '/dev/ttyS0')
[Brian Johnson]
- Unix: the option "--config FILE" tells B2 to use a different config file
- Unix: new prefs options "dsp" and "mixer" to set the OSS device names
instead of the hardcoded '/dev/dsp' and '/dev/mixer'
The patches for this update were contributed by Todd Vierling in
private e-mail.
- added support for on-the-fly video resolution and depth switching,
and gamma tables
- fsave/frestore emulation under AmigaOS and NetBSD/m68k always behaves
like a 68882/68040 FPU, eliminating the need for 68060 FPU patches
- added support for platform-independant mutexes, used by adb.cpp for
thread-safe mouse handling
- the TIME_OFFSET constant has been replaced by a (portable) function
TimeToMacTime(); file dates in ExtFS should now be correct
- ADBInterrupt() is no longer called from the 60Hz interrupt but has
its own interrupt flag, potentially increasing the smoothness of
mouse movement
- ether.cpp: implemented relatively platform-independant "AppleTalk
over UDP" mode that doesn't require any special kernel modules or
network drivers but can only interconnect instances of Basilisk II;
this is enabled by setting "udptunnel" to true
- Unix: windowed display mode supports different resolutions and color
depths, which can be switched on-the-fly
- Unix: Ctrl-F5 grabs mouse in windowed mode (enhanced compatibility
with games like flight simulators)
- Unix: X11 events are handled as soon as they arrive, outside of the
60Hz video refresh raster
- Unix: audio sample rate, bit depth and channel count are adjustable
in the MacOS "Sound" control panel
The patches for this update were contributed by Todd Vierling in PR pkg/21861.
now and not NetBSD-*-arm32. Changes include one or more of:
- Change MACHINE_ARCH == arm32 to also match arm
- Where ONLY_FOR_PLATFORM includes NetBSD-*-arm32, add NetBSD-*-arm
- Where BROKEN or worked around for arm gcc bugs, set USE_GCC3
The last may shake out a few more broken packages the next bulk build.
DOSBox is a DOS-emulator using SDL for easy portability to
different platforms, DOSBox has already been ported to
several different platforms, such as Windows, BeOS, Linux,
Mac OS X...
DOSBox emulates a 286/386 realmode CPU, Directory
FileSystem/XMS/EMS, a SoundBlaster card for excellent sound
compatibility with older games...
You can "re-live" the good old days with the help of
DOSBox, it can run plenty of the old classics that don't
run on your new computer !
Changes:
- Changed output audio sample format back to unsigned again (seems to work
better on some systems).
- Adjusted audio functions so that Hatari's sound should be right again.
- Fixed TOS patching routine - it was only working on big endian machines
(Thanks to Tony Smolar for the hint!).
- IKBD_Cmd_ReadClock() should now work.
- Some parts of the code accessed the SR directly to read the IPL - however
the UAE CPU core only updates the SR when doing a MakeSR() first. So this
is done in the affected code parts now, too.
- The IPL wasn't raised when a MFP interrupt occured - fixed now.
- Full screen resolution for ST-Low can now be selected from the screen
setup dialog.
- The IKBD emulation does not longer duplicate joystick fire buttons when
a game (like Babarian) tries to use both, joystick and mouse => Games like
Lotus Turbo Esprit Challange are now working again!
- Improved audio timer function - the code should now be a little bit faster.
- Resynced Hatari's UAE CPU core with UAE 0.8.22 - this fixes some bugs in
68k instructions like ABCD and SBCD.
- Now only reinitializing the sound subsystem if really needed, this should
fix a problem with Linux ALSA sound driver (Thanks to Tony Smolar for
discovering this problem!).
- Added another patch for TOS 2.05 so that this TOS version should now work
with Hatari, too.
- Rewrote TOS patching routine. It is more flexible now.
- Removed 0xa0ff opcode for VDI resolutions; using GEMDOS_OPCODE now instead.
- Fixed MMU RAM size configuration bug.
- Rewrote some screen conversion functions in C (low320x8.c, low640x8.c,
med640x8.c and spec640x16.c).
- When a bus or address error occurred, the PC was often not set to the
right exception handler routine. This has been fixed now - thanks to
Philippe Gerin for finding the bug and the patch for solving it!
Change summary:
15-Nov-02:
SCP and libraries:
* Added Telnet console support
* Removed VT emulation support
* Added support for statically buffered devices
* Added HELP <command>
* Fixed bugs in set_logon, ssh_break (found by David Hittner)
* Added VMS file optimization (from Robert Alan Byer)
* Added quiet mode, DO with parameters, GUI interface, extensible commands (from Brian Knittel)
* Added sim_os_sleep, renamed sim_poll_kbd, sim_putchar
* Modified calling sequence for boot routines
* Modified save file format to save device and unit flags (note: RESTORing save files from previous versions will produce errors)
All magtapes: Added support for end-of-medium
All DECtapes: Added support for RT11 image file format
PDP-1:
* Added DECtape support
* Added device enable/disable support
PDP-8: Added RX28 support
PDP-10:
* Added variable vector support
* Added SHOW CPU IOSPACE command
* Added RX211 support
PDP-11:
* Added variable vector support
* Added SHOW CPU IOSPACE command
* Added RX211, KW11P, and TMSCP tape support
* Added support for up to four RQDX3 MSCP disk controllers
* Added support for variable CSR addressing to device bootstraps
* Added automatic disabling of Unibus devices in Qbus configurations
* Abstracted paper tape reader for code sharing
* Fixed TS11/TSV05 bugs
* Added latent support for Ethernet and autoconfigure
VAX:
* Added TMSCP tape support
* Added support for up to four RQDX3 MSCP disk controllers
* Added support to attach NVR to a file
* Added automatic load of bootstrap code file
* Added variable vector support
* Added SHOW CPU IOSPACE command
* Fixed TS11/TSV05 bugs
* Added latent support for Ethernet and autoconfigure
IBM 1620: first release
Altair Z80: added hard drive support
IBM 1401: fixed bug in load mode magtape read
21-Nov-02:
PDP-1
* Changed typewriter to half duplex, fixed shift control (found by Derek Peschel)
PDP-10
* Fixed bug in tape boot (reported by Michael Thompson)
* Fixed bug in tape read (reported by Harris Newman)
18-Jan-03:
SCP and libraries
* Added dynamic memory size support in RESTORE
* Added EValuate command
* Added ! (OS shell) command (from Mark Pizzolato)
* Added BREAK support to Telnet routines (from Mark Pizzolato)
* Fixed IAC+IAC processing bugs (from Mark Pizzolato)
* Added active connect routines for HP interprocessor link
* Fixed bug in Windows stack startup/shutdown
PDP-1: added Type 24 serial drum
PDP-4: added Type 24 serial drum
PDP-11
* Fixed intermittent read problem in TMSCP tape emulator
* Changed terminal mode default to 7-bit (for early UNIX)
* Fixed bug in XQ chained mode processing (from by Mark Pizzolato)
* Improved XQ performance (from Mark Pizzolato)
VAX: added console halt capability (from Mark Pizzolato)
HP2100
* Added IOP support to 21MX
* Added Access interprocessor link
Interdata: first release
SDS 940: first release
Terminals and multiplexors: added BREAK support
06-Feb-03:
SCP: added VMS support for ! (from Mark Pizzolato)
PDP-11: changed R, added SP to track current register set and stack pointer
PDP-18b:
* Fixed RF09/RF15 IOT decoding and address overrun logic (found by Hans Pufal)
* Modified RF09/RF15 to support variable sizes and autosizing
* Fixed RP15/RP02 IOT decoding and command initiation
* Added RB09 fixed head disk for the PDP-9
* Added LP09 line printer for the PDP-9 and PDP-15
PDP-8: modified DF32 and RF08 to support variable sizes and autosizing
Nova: modified Novadisk to support variable sizes and autosizing
Interdata 16b CPU: fixed bug in SETM, SETMR (found by Mark Pizzolato)
HP2100:
* Fixed last cycle bug in DMA output (found by Mike Gemeny)
* Modified interprocessor link to be full duplex (found by Mike Gemeny)
24-Feb-03:
SCP:
* Added .ini startup capability
* Added multiple breakpoint actions
* Added multiple switch evaluation points in command lines
* Added magtape support library
* Fixed bug in multiword deposit to files
Nova: fixed autosizing algorithm in Nova fixed head disk
PDP-8:
* Fixed autosizing algorithm in DF32, RF08, and RX28
* Fixed beginning of tape error handling in TM8E
PDP-11/VAX:
* Added user-defined drive type in RQDX3 and TQK50
* Fixed queue ordering problem in RQDX3 and TQK50
* Fixed interrupt vector calculation in RQDX3 and TQK50
* Fixed overly restrictive test for bad modifiers in TQK50
* Fixed autosizing algorithm in RX211
18B PDP's:
* Fixed three EAE bugs (found by Hans Pufal)
* Fixed FMTASC macro problem (found by Hans Pufal)
* Removed extra bit from RF15 address register
* Fixed autosizing algorithm in RF15
* Fixed TC59 interrupt handling, BOT error handling
Interdata:
* Fixed DP and MSM handling of cylinder overflow on writes
* Fixed magtape to stop selector channel on end-of-file or other read error
* Fixed precision clock autocalibration for Unix V7
* Added capability to boot from DP fixed platter
* Added SHOW SELCH n command
* Changed TTP default to 7B (for Unix)
* Added relative addressing to symbolic debugger
All line frequency clocks: added SET <dev> 50HZ/60HZ to select line frequency
All DEC consoles: added SET TTI CTRL-C for Windows VC++ ^C problem
All magtapes: revised to use magtape library
This isn't security problem.
The package freetype2 has been compiled without the so-called byte code
interpreter function to prevent any infringement of patent rights.
security update of glibc-devel.
glibc-devel: Libraries for the C compiler
----------------------------------------------------------------------
File: glibc-devel-2.2.4-78.i386.rpm
Version: 2.2.4
Size: 10698 kB
Date: Tue 01 Apr 2003 01:31:31 PM CEST
Source: glibc-2.2.4-78.src.rpm
Security: Yes
----------------------------------------------------------------------
Description: This security update fixes an integer overflow in the RPC xdrmem_getbytes()
function of the glibc that may be exploited to execute arbitrary code with
the privileges of the user running the RPC application.
security update of glibc and libz.
glibc: Shared libraries (from the C library package)
----------------------------------------------------------------------
File: glibc-2.2.4-78.i386.rpm
Version: 2.2.4
Size: 7459 kB
Date: Tue 01 Apr 2003 01:31:31 PM CEST
Source: glibc-2.2.4-78.src.rpm
Security: Yes
----------------------------------------------------------------------
Description: This security update fixes an integer overflow in the RPC xdrmem_getbytes()
function of the glibc that may be exploited to execute arbitrary code with
the privileges of the user running the RPC application.
libz: Data Compression Library
----------------------------------------------------------------------
File: libz-1.1.3-597.i386.rpm
Version: 1.1.3
Size: 92 kB
Date: Wed 27 Feb 2002 08:19:58 PM CET
Source: libz-1.1.3-597.src.rpm
Security: Yes
----------------------------------------------------------------------
Description: Security update: prevent double free() in the compression library.
Changes since 0.68.1 includes:
- Re-added Ben Collins' core change that adds support for extra mice.
- Reverted to using the original fronthlp.c (from 0.67.2) modified to
work with the 0.69 core.
- Fixed a logic bug in the XInput devices button-handling. (Ben
Collins)
- Made a tiny fix in fileio.c that allows specifying direct paths to
roms to work again; e.g., ./xmame.x11 ./moo.zip
