Changes:
* Implement new mirror algorithm for regular files. (server/client)
This improves the performance to update large regular files incredibly.
* Fix a potential problem to update rcsfile(5) based files with
over 256 symbols. (server/client)
Changes:
* Fix a bug not to accept the option -L. (cvscan)
* Fix a bug that the default value of 'maxclients' is not set properly
when 'maxclients' is not specified. (server)
* Fix bugs of alignment. (server/client)
* Fix bugs not to work properly when set 'errormode' to 'fixup' or
'ignore' in some case. (server/client)
Changes:
* New feature : errormode (server/client)
Specifies the behaviour when any errors/conflicts are found in local
distributions.
abort : Exit/Disconnect with error messages immediately.
fixup : Recover errors/conflicts and keep running.
ignore : Ignore any errors/conflicts.
The keyword 'loose' is obsoleted, same to set 'errormode' to 'ignore'.
This exists only for the backward compatibility.
* Option (client)
-L : Set 'errormode' to 'fixup' for all collections.
* Option (cvscan)
-L : Set 'errormode' to 'fixup'.
-l : Set 'errormode' to 'ignore'.
* Improve stability. (server/client)
Changes:
* Fix serious bugs around the destruction of hash context.
These may cause abort() in C library and the server will stop.
* Improve stability.
* Fix some bugs.
* Make this compile with Intel C++ Compiler.
* Make this compile with Sun Microsystems Forte C.
Changes:
* Improve stability.
* HEADS UP: Compression
0.22.0 has a serious compression bug. If you use old versions,
please upgrade 0.23.0 or higher. If 0.23.0 detects the remote host
is 0.22.0, fallback to no compression mode forcibly.
* Fix many bugs.
ChangeLog:
* New keyword: compress (client only)
* Options (client)
-Z : Disables a compression.
-z : Enables a compression.
* Option (server)
-z: Sets the compression level.
0: no compression.
1: the fastest, but less compression.
9: the slowest, but best compression.
Changes:
* New feature: access
It provides the way to control to allow/deny the connections.
allow <v4addr>[/<netmask>][,<max>]
allow <v6addr>[/<prefixlen>][,<max>]
allow <domain>[,<max>]
'allow' specifies the acceptable address block and
the acceptable domain name. <max> means the maximum
connections from the address block or the domain name.
Even if <max> is greater than 'maxclient', the maximum
is restricted by the value of 'maxclient'.
always <v4addr>[/<netmask>]
always <v6addr>[/<prefixlen>]
always <domain>
'always' specifies the acceptable address block and the
acceptable domain name with no restrictions. Even if
the number of the connections is already same as
'maxclient', the connection from this address block or
the domain name never be rejected.
deny <v4addr>[/<netmask>]
deny <v6addr>[/<prefixlen>]
deny <domain>
'deny' specifies the unacceptable address block and the
unacceptable domain name. The server always rejects the
connection from this address block and the domain name.
'permit' is an alias to 'allow'.
'reject' is an alias to 'deny'.
* Fix a bug that cvscan doesn't work if 'distfile' isn't set.
* Experimental SOCKS5 support.
If you want to use SOCKS5, please specify SOCKS5_TYPE.
The following types are available:
dante
nec
none (default)
Changes:
* New feature: distfile
It provides the flexible way to distribute files.
allow, upgrade <pattern>
Distribute files which matches the pattern.
deny, omitany <pattern>
Don't distribute files which matches the pattern.
Changes:
* Support libgcrypt and mhash libraries.
If you want to use other hash library instead of native one,
please specify HASH_TYPE.
The following types are available:
libgcrypt
mhash
native (default)
openssl
By this change, never fall back to OpenSSL automatically even if a
native hash library is not available.
* Option (cvscan)
-c: Specifies the configuration file for cvsyncd.
cvscan use the information of scanfile (loose, nofollow,
release, prefix and so on) from it.
ChangeLog:
* HEADS UP: Change the Protocol around 'SetAttr'.
These changes remove the potential 'SetAttr' issue.
If you use the old versions, please upgrade to 0.20.0 or higher.
* Fix a bug that the default value of 'maxclients' isn't set properly.
ChangeLog:
* Fix a bug that the 'loose' feature doesn't work properly.
* Fix a bug that both server/client tried to traverse wrong paths
if a relative path calculated by the 'super' keyword is more than
2 levels.
ChangeLog:
* Fix a bug that the 'SetAttrs' request for directories was issued in
a wrong order.
* New feature: loose
Background:
Proper CVS repositories don't have files with same file name
inside/outside 'Attic' directory of the same directory. If both exist
accidentally, it is very difficult to determine which file is the
right one. So in the past, cvsync exits abnormaly with the
'inconsistency' error message. But some CVS repositories has this
inconsistency. It is unhappy for CVS repositories mirror sites to
redistribute them.
The 'loose' option provides a workaround for bogus CVS repositories.
When cvsync detects a inconsistency, cvsync assumes that the a file
with more recent modification time is right and don't exit.
This feature is optional. The best way is to remove the
inconsistencies from master sites, of course.
* Fix a bug that when move a RCS file from inside/outside Attic to
outside/inside Attic without chaging modifition time and permissions,
cvsync can't detect the action.
ChangeLog:
2003-04-15 MAEKAWA Masahide <maekawa@daemon-systems.org>
* 0.19.4
* Fix a bug that broken 'head' and 'branch' are written.
* Make this compile on Solaris 9
* Fix a bug to a server writes a wrong pid number to <pidfile>.
ChangeLog:
2003-04-14 MAEKAWA Masahide <maekawa@daemon-systems.org>
* 0.19.3
* Fix a bug that '@' is missing for 'comment'.
* Improve the network performance.
* Options (both)
-V: Print the version number to standard error.
-v: Verbose mode.
* Options (server)
-g: Specifies the group the server should run as.
-u: Specifies the user the server should run as.
-w: Sets the working directory of the server.
ChangeLog:
2003-04-09 MAEKAWA Masahide <maekawa@daemon-systems.org>
* 0.19.2
* When the configuration file is updated, a server reloads it
automatically.
* Options (client)
-4 : Forces a client to use IPv4 addresses only
-6 : Forces a client to use IPv6 addresses only.
* A server runs in background mode (default).
When executed with -f option, a server runs in foreground mode.
ChangeLog:
2003-04-08 MAEKAWA Masahide <maekawa@daemon-systems.org>
* 0.19.1
* Fix a bug to fail to mirror a repository when no pre-existing files.
* Fix a bug that list operations fail when pre-allocated buffers are
exhausted.
* Even if a server fail to parse a RCS file, just ignore it and
continue to run.
2003-04-05 MAEKAWA Masahide <maekawa@daemon-systems.org>
* Fix a bug that a packet length of protocol version is mistakenly
calculated.
ChangeLog:
2003-04-04 MAEKAWA Masahide <maekawa@daemon-systems.org>
* 0.19.0
* HEADS UP: Change Cvsync Version Exchange Protocol
If you use the old versions, please upgrade to 0.19.0 or higher.
* Improve the performance to update sub-collection.
When a server receives an update request of collections
defined as sub-collection, the server sends differences
of the sub-collection with a relative prefix based on the
`super' collection. The client can update only that directory.
* REMARK:
AIX 4.3.3 without IPv6
BSD/OS 4.2
Cygwin 1.3.22 without IPv6
FreeBSD/i386 5.0-CURRENT (as of 2003/03/12)
FreeBSD/i386 4.7-STABLE (as of 2003/03/05)
FreeBSD/sparc64 5.0-CURRENT (as of 2003/03/05)
Mac OS X
NetBSD/alpha 1.6O with native pthreads
NetBSD/i386 1.6P with native pthreads
NetBSD/i386 1.6L with GNU Pth
NetBSD/macppc 1.6M with native pthreads
OpenBSD/i386 3.2-stable
OpenBSD/sparc64 3.3-beta
Solaris 8/SPARC
Works fine on these platforms.
2003-04-01 MAEKAWA Masahide <maekawa@daemon-systems.org>
* Make this compile on AIX 4.3.3
ChangeLog:
2003-04-01 MAEKAWA Masahide <maekawa@daemon-systems.org>
* 0.18.0
* Implement a new keyword 'super', which allows to define
sub-collections of a collection. For example:
collection {
name netbsd release rcs
prefix /cvsroot
...
}
collection {
name netbsd-pkgsrc release rcs
prefix /cvsroot/pkgsrc
super netbsd
}
For the collection `netbsd-pkgsrc', a client gets only
/cvsroot/pkgsrc part of the whole of NetBSD CVS repository
(/cvsroot). When `super' is specified as shown above, 'nofollow'
and 'umask' of the collection `netbsd-pkgsrc' with `super' are
inherited from the collection `netbsd'. When a scanfile is
also specified in the collection `netbsd', the collection
`netbsd-pkgsrc' employs the corresponding entries in the parent's
scanfile. Thus, using `super' keyword, only a scanfile for the
top of sub-collections is needed to use the scanfile functionality
when sub-collections of a collection are defined. It makes the use
of a scanfile more efficient.
'super' can be specified recursively (i.e. a sub-collection can
be the parent of another sub-collection).
(Thanks hrs AT FreeBSD DOT org)
ChangeLog:
2003-03-31 MAEKAWA Masahide <maekawa@daemon-systems.org>
* 0.17.2
* Fix a bug that the fallback of file compare algorithm doesn't work.
* Fix a bug to calculate the length of file name in Attic.
ChangeLog:
2003-03-29 MAEKAWA Masahide <maekawa@daemon-systems.org>
* 0.17.1
* ANNOUNCE: Public cvsync service
cvsync.allbsd.org provides the distribution and source trees of
FreeBSD, NetBSD, OpenBSD, OpenDarwin, XFree86, and TenDRA via cvsync.
URL: http://www.allbsd.org/#pub-cvsync
* mk/*.mk
Make compile on old BSDs.
2003-03-28 MAEKAWA Masahide <maekawa@daemon-systems.org>
* Fix signed vs unsigned problem.
ChangeLog:
2003-03-28 MAEKAWA Masahide <maekawa@daemon-systems.org>
* 0.17.0 is out.
* HEADS UP: Change Collection Exchange Protocol
To make add the new release type easy, the protocol to exchange
collections list is changed.
All servers/clients SHOULD be updated to 0.17.0 or higher.
* Fix a bug to calculate the symbolic link path name length.
(noticed by naddy AT OpenBSD DOT org)
2003-03-27 MAEKAWA Masahide <maekawa@daemon-systems.org>
* New release type: list
Retrieve the collections list provided by the server.
* Scanfile (client)
If the scanfile is specified and that doesn't exist, it's generated
automatically at the stage of loading the configuration file.
ChangeLog:
2003-03-26 MAEKAWA Masahide <maekawa@daemon-systems.org>
* 0.16.0 is out.
* Scanfile (server)
The empty scanfile is acceptable.
* The symbolic link is fully supported.
Client: Never follow the symbolic link.
Server: If 'nofollow' is specified in a 'collection' section,
don't follow the symbolic link.
The default is off, i.e. follow the symbolic link.
ChangeLog:
2003-03-25 MAEKAWA Masahide <maekawa@daemon-systems.org>
* 0.15.2 is out
* mk/*.mk
Make compile on cygwin (cvscan/rcscan/rcscmp only).
cvsync{,d} depends on the existence of getaddrinfo()/getnameinfo().
The latest cygwin (1.3.22-1) doesn't have these APIs, so can't
compile them yet.
ChangeLog:
2003-03-24 MAEKAWA Masahide <maekawa@daemon-systems.org>
* 0.15.1 is out
* Scanfile (server)
Implement the experimental server-side scanfile feature.
* REMARK: the Performance
When the scanfile feature is enabled on both server/client,
the update procedure is done in 3sec (best) - 40min (worst).
ChangeLog:
2003-03-18 MAEKAWA Masahide <maekawa@daemon-systems.org>
* 0.15.0 is out
* Improve the performance and stabilities with scanfile features.
* Signal Handling (client)
When SIGINT or SIGTERM is received, the client process stop and
the scanfile is updated if it's enabled.
* Improve English (Thanks hrs AT FreeBSD DOT org!)
2003-03-15 MAEKAWA Masahide <maekawa@daemon-systems.org>
* mk/base.mk, mk/pthread.mk (FreeBSD/Solaris)
Clean up compiler/linker options.
ChangeLog:
2003-03-15 MAEKAWA Masahide <maekawa@daemon-systems.org>
* 0.14.5 is out
* Scanfile (client)
Even if very deep unnecessary directories exist on the local disk,
works properly.
* doc/FAQ
Add one item.
Q. How do I compile/install your tools?
A. Just type 'gmake'/'gmake install'.
2003-03-11 MAEKAWA Masahide <maekawa@daemon-systems.org>
* sock_select @ common/network.c
Wake up the server listening thread in every seconds.
* Signal Handling (server)
If SIGINT or SIGTERM is received, reject new connections and
the finialization procedure will be deferred until all running
cvsync threads are done.
* Signal Handling (client) - well known bug
If SIGINT or SIGTERM is received, never stop. Please issue SIGKILL.
From ChangeLog:
2003-03-10 MAEKAWA Masahide <maekawa@daemon-systems.org>
* 0.14.4 is out
* common/hash.h, mk/hash.mk, mk/pthread.mk
make compile on Red Hat Linux 7.2 with/without OpenSSL.
* Fix typos and missing headers.
2003-03-09 MAEKAWA Masahide <maekawa@daemon-systems.org>
* doc/FAQ
Add one item.
Q. Are these tools stable?
A. If you think so, they are stable.
* mk/pthread.mk (FreeBSD/NetBSD/OpenBSD specific)
Use -pthread (LDFLAGS) instead of -lpthread or -lc_r (LIBS).
(noticed by naddy AT OpenBSD DOT org and slightly modified)
* common/filetypes.h
Some file types are reserved.
B : block special
C : character special
L : hard link
S : symbolic link
