tar difficulties (too long files). EXTRACT_USING=bsdtar solves this issue.
Also, they embed the (previous) version of the package, and thus would cause
PLIST mismatches since the 8.2.0 update.
pkglint -Wall -F -r cross
xtensa-esp32-elf-gcc has been manually edited afterwards because when
realigning variable assignments, pkglint only allows one long outlier
line. This package has two long SITES.* lines, therefore pkglint wanted
to indent the variable values much further to the right. This needs to be
fixed in pkglint.
* It seems that it is MAKE_JOBS_SAFE=yes
* Set LICENSE
* Set new HOMEPAGE and MASTER_SITES
Changelog:
V2.17: Switched Apple II output format to AppleSingle.
Although the primary target OS for the Apple II for sure isn't DOS 3.3 but ProDOS 8 the Apple II binary files contained a DOS 3.3 4-byte header. Recently I was made aware of the AppleSingle file format. That format is a much better way to transport Apple II meta data from the cc65 toolchain to the ProDOS 8 file system. Therefore I asked AppleCommander to support the AppleSingle file format. Now that there's an AppleCommander BETA with AppleSingle support it's the right time for this change.
I bumped version to 2.17 because of this from the perspective of Apple II users of course incompatible change.
V2.14 to V2.16:
Not available
Changelog:
GAS
Changes in 2.32:
* Add -mvexwig=[0|1] option to x86 assembler to control encoding of
VEX.W-ignored (WIG) VEX instructions.
* Add -mx86-used-note=[yes|no] option to generate (or not) x86 GNU property
notes. Add a --enable-x86-used-note configure time option to set the
default behavior. Set the default if the configure option is not used
to "no".
* Add support for the MIPS Loongson EXTensions R2 (EXT2) instructions.
* Add support for the MIPS Loongson EXTensions (EXT) instructions.
* Add support for the MIPS Loongson Content Address Memory (CAM) ASE.
* Add support for the C-SKY processor series.
* Add support for the MIPS Loongson MultiMedia extensions Instructions (MMI)
ASE.
LD
Changes in 2.32:
* Report property change in linker map file when merging GNU properties.
* Add support for the C-SKY processor series.
* -t now doesn't report members within archives, unless -t is given twice.
A single -t is now more useful when generating a list of files that should be
packaged for a linker bug report. For example:
gcc hello.c -save-temps -Wl,-t | xargs realpath | sort | uniq > files
tar cJf test.tar.xz `cat files`
BINUTILS
Changes in 2.32:
* The addr2line, c++filt, nm and objdump tools now have a limit on the
maximum amount of recursion that is allowed whilst demangling strings.
The value for this limit is defined by the DEMANGLE_RECRUSE_LIMIT
constant declared in the include/demangle.h header file. At the time
of writing this constant has the value of 2048.
The --no-recurse-limit option can be used to remove the limit, restoring
the behaviour of earlier versions of these tools. This may be needed in
order to dmangle truly complicated names, but it also leaves the tools
vulnerable to stack exhaustion from maliciously constructed mangled names.
* Objdump's --disassemble option can now take a parameter, specifying the
starting symbol for disassembly. Disassembly will continue from this
symbol up to the next symbol or the end of the function.
* The MIPS port now supports the Loongson 2K1000 processor which implements
the MIPS64r2 ISA, the Loongson-mmi ASE, Loongson-cam ASE, Loongson-ext ASE,
Loongson-ext2 ASE and MSA ASE instructions. Add -march=gs264e option for
Loongson 2K1000 processor.
* The MIPS port now supports the Loongson 3A2000/3A3000 processor which
implements the MIPS64r2 ISA, the Loongson-mmi ASE, Loongson-cam ASE,
Loongson-ext ASE and Loongson-ext2 ASE instructions. Add -march=gs464e
option for Loongson 3A2000/3A3000 processor.
* The MIPS port now supports the Loongson 3A1000 processor, aka Loongson3a,
which implements the MIPS64r2 ISA, the Loongson-mmi ASE, Loongson-cam ASE
and Loongson-ext ASE instructions. Add -march=gs464 option for Loongson
3A1000 processor, The -march=loongson3a is an alias of -march=gs464 for
compatibility.
With BSD make, even though there is no apparent reason, errors occur
during the build about libavrdude.a not being present. Even if that
is forced as a target, there are -j failures.
Several .hpp files were not extracted and installed, always use
`bsdtar' to extract and install also the missing .hpp.
Bump PKGREVISION.
Patch from Jonathan Schleifer via PR pkg/53725. Thank you Jonathan!
so that this package builds on arm64 platforms.
this change probably can be copied into the main GCC 7 package too.
no pkg bump as this should only enable building where it was not
working already.
Changelog:
General Improvements
Fixed LTO link-time performance problems caused by an overflow in the
partitioning algorithm while building large binaries.
Language Specific Changes
C++
GCC 8.2 fixed a bug introduced in GCC 8.1 affecting passing or returning of
classes with a deleted copy constructor and defaulted trivial move constructor
(bug c++/86094). GCC 8.2 introduces -fabi-version=13 and makes it the default,
ABI incompatibilities between GCC 8.1 and 8.2 can be reported with -Wabi=12.
See C++ changes for more details.
Target Specific Changes
IA-32/x86-64
-mtune=native performance regression PR84413 on Intel Skylake processors
has been fixed.
Changelog:
2.31.1
This release also contains a fix for gold/23409 where the gold
linker could end up creating duplicate copies of some symbols.
2.31
This release contains numerous bug fixes, and also the
following new features:
* Direct linking with DLLs for Cygwin and Mingw targets is now faster.
* The linker now defaults to enabling -z separate-code for Linux
targets, although a configure time option can change this.
This option can increase disk and memory size of executables, but
it does help to improve security.
* The disassembler supports Netronome Flow Processor (NFP) firmware
files.
* The AArch64 disassembler supports showing disassembly notes which
are emitted when inconsistencies are found with the instruction that
may result in the instruction being invalid. It also emits warnings
when a combination of an instruction and a named register could be
invalid.
* The AR archive manager now supports an "O" modifier to display
member offsets inside an archive.
* The ADR and ADRL pseudo-instructions supported by the ARM assembler
now only set the bottom bit of the address of thumb function symbols
if the -mthumb-interwork command line option is active.
* The MIPS assembler supports the Global INValidate (GINV) and
Cyclic Redudancy Check (CRC) architecture extensions.
* Support has been added for the Freescale S12Z architecture.
* The assembler has a new --generate-missing-build-notes=[yes|no]
option to create (or not) GNU Build Attribute notes if none are
present in the input sources.
* The -mold-gcc command-line option has been removed for x86 targets.
* The x86 assembler now supports a -O[2|s] command-line options to
enable alternate shorter instruction encodings.
* The gold linker has a new --debug=plugin option for easier debugging
of plugin-related problems.
* The gold linker now supports the -z keep_text_section_prefix option.
* The gold linker now has support for .note.gnu.property sections
(from Linux ABI extensions).
* Add gold linker now has support for Intel's Indirect Branch Tracking
(IBT) and Shadow Stack instructions.
Changelog:
General Improvements
Fixed LTO link-time performance problems caused by an overflow in the
partitioning algorithm while building large binaries.
Language Specific Changes
C++
GCC 8.2 fixed a bug introduced in GCC 8.1 affecting passing or returning of
classes with a deleted copy constructor and defaulted trivial move constructor
(bug c++/86094). GCC 8.2 introduces -fabi-version=13 and makes it the default,
ABI incompatibilities between GCC 8.1 and 8.2 can be reported with -Wabi=12.
See C++ changes for more details.
Target Specific Changes
IA-32/x86-64
-mtune=native performance regression PR84413 on Intel Skylake processors
has been fixed.
Changelog:
2.31.1
This release also contains a fix for PR gold/23409 where the gold
linker could end up creating duplicate copies of some symbols.
2.31
This release contains numerous bug fixes, and also the
following new features:
* Direct linking with DLLs for Cygwin and Mingw targets is now faster.
* The linker now defaults to enabling -z separate-code for Linux
targets, although a configure time option can change this.
This option can increase disk and memory size of executables, but
it does help to improve security.
* The disassembler supports Netronome Flow Processor (NFP) firmware
files.
* The AArch64 disassembler supports showing disassembly notes which
are emitted when inconsistencies are found with the instruction that
may result in the instruction being invalid. It also emits warnings
when a combination of an instruction and a named register could be
invalid.
* The AR archive manager now supports an "O" modifier to display
member offsets inside an archive.
* The ADR and ADRL pseudo-instructions supported by the ARM assembler
now only set the bottom bit of the address of thumb function symbols
if the -mthumb-interwork command line option is active.
* The MIPS assembler supports the Global INValidate (GINV) and
Cyclic Redudancy Check (CRC) architecture extensions.
* Support has been added for the Freescale S12Z architecture.
* The assembler has a new --generate-missing-build-notes=[yes|no]
option to create (or not) GNU Build Attribute notes if none are
present in the input sources.
* The -mold-gcc command-line option has been removed for x86 targets.
* The x86 assembler now supports a -O[2|s] command-line options to
enable alternate shorter instruction encodings.
* The gold linker has a new --debug=plugin option for easier debugging
of plugin-related problems.
* The gold linker now supports the -z keep_text_section_prefix option.
* The gold linker now has support for .note.gnu.property sections
(from Linux ABI extensions).
* Add gold linker now has support for Intel's Indirect Branch Tracking
(IBT) and Shadow Stack instructions.
Date: Sat, 27 Jan 2018 16:33:36 +0000
This release contains numerous bug fixes, and also the
following new features:
In the assembler:
* Add support for location views in DWARF debug line information.
In the BFD linker:
* Add -z separate-code to generate separate code PT_LOAD segment.
* Add "-z undefs" command line option as the inverse of the "-z defs" option.
* Add -z globalaudit command line option to force audit libraries to be run
for every dynamic object loaded by an executable - provided that the loader
supports this functionality.
* Tighten linker script grammar around file name
specifiers to prevent the use of SORT_BY_ALIGNMENT and
SORT_BY_INIT_PRIORITY on filenames. These would
previously be accepted but had no effect.
* The EXCLUDE_FILE directive can now be placed within any
SORT_* directive within input section lists.
In the GOLD linker:
* Add support for .MIPS.options sections (MIPS only).
* Add support for compound relocations (MIPS only).
* Add --emit-stub-syms, --no-tls-optimize, --tls-get-addr-optimize
options (PowerPC only).
* Add -z text-unlikely-segment option.
* Add plugin support for adding new input files
(LDPT_REGISTER_NEW_INPUT_HOOK).
In the utilities:
* Add --debug-dump=links option to readelf and
--dwarf=links option to objdump which displays the
contents of any .gnu_debuglink or .gnu_debugaltlink
sections.
* Add a --debug-dump=follow-links option to readelf and a
--dwarf=follow-links option to objdump which causes indirect
links into separate debug info files to be followed when
dumping other DWARF sections.
Performing substitutions during post-patch breaks tools such as mkpatches,
making it very difficult to regenerate correct patches after making changes,
and often leading to substituted string replacements being committed.
