Problems found with existing distfile for eagle:
distfiles/eagle-lin32-7.4.0.run
No changes made to eagle/distinfo file.
Otherwise, existing SHA1 digests verified and found to be the same on
the machine holding the existing distfiles (morden). All existing
SHA1 digests retained for now as an audit trail.
Do it for all packages that
* mention perl, or
* have a directory name starting with p5-*, or
* depend on a package starting with p5-
like last time, for 5.18, where this didn't lead to complaints.
Let me know if you have any this time.
Dinotrace is now distributed under GPL v3 (previously GPL 2).
Fix signal radix being lost when trace is reread.
Fix core dump when verilog trace has single timestamp.
Fix core dump when no hostname in /etc/hosts.
Fix message trashing stack and make cppcheck clean.
a) refer 'perl' in their Makefile, or
b) have a directory name of p5-*, or
c) have any dependency on any p5-* package
Like last time, where this caused no complaints.
* Dinotrace 9.3c 1/2/2007
*** Add signed decimal radix. [by Uwe Bonnes]
*** Builds now take place in "obj_dir" to keep them distinct from sources.
**** Fix VCD files with 10 or 100 femtosecond resolution.
**** Fix dinotrace.el complaint about bad verilog-mode.el version.
[Joseph Holtgrefe]
**** Fix core dump when no fonts are available. [Dmitri Belimov]
* Dinotrace 9.3b 3/13/2006
*** Fix line number incrementing in Verilog errors. [Uwe Bonnes]
* Dinotrace 9.3a 6/13/2005
*** Fix too small buttons under openmotif.
*** Fix missing keyboard accelerators under openmotif.
* Dinotrace 9.2b 5/03/2005
*** The default extension for Verilog dumps is now .vcd instead of .dmp.
**** Fix traces containing only real numbers. [Vitor Antunes]
**** Fix segfault when doing signal adds. [Guy Hutchinson]
Revision history for Dinotrace
The contributors that suggested a given feature are shown in [].
* Dinotrace 9.3a 06/13/2005
*** Fix too small buttons under openmotif.
*** Fix missing keyboard accelerators under openmotif.
* Dinotrace 9.2b 05/03/2005
*** The default extension for Verilog dumps is now .vcd instead of .dmp.
**** Fix traces containing only real numbers. [Vitor Antunes]
**** Fix segfault when doing signal adds. [Guy Hutchinson]
around at either build-time or at run-time is:
USE_TOOLS+= perl # build-time
USE_TOOLS+= perl:run # run-time
Also remove some places where perl5/buildlink3.mk was being included
by a package Makefile, but all that the package wanted was the Perl
executable.
Several changes are involved since they are all interrelated. These
changes affect about 1000 files.
The first major change is rewriting bsd.builtin.mk as well as all of
the builtin.mk files to follow the new example in bsd.builtin.mk.
The loop to include all of the builtin.mk files needed by the package
is moved from bsd.builtin.mk and into bsd.buildlink3.mk. bsd.builtin.mk
is now included by each of the individual builtin.mk files and provides
some common logic for all of the builtin.mk files. Currently, this
includes the computation for whether the native or pkgsrc version of
the package is preferred. This causes USE_BUILTIN.* to be correctly
set when one builtin.mk file includes another.
The second major change is teach the builtin.mk files to consider
files under ${LOCALBASE} to be from pkgsrc-controlled packages. Most
of the builtin.mk files test for the presence of built-in software by
checking for the existence of certain files, e.g. <pthread.h>, and we
now assume that if that file is under ${LOCALBASE}, then it must be
from pkgsrc. This modification is a nod toward LOCALBASE=/usr. The
exceptions to this new check are the X11 distribution packages, which
are handled specially as noted below.
The third major change is providing builtin.mk and version.mk files
for each of the X11 distribution packages in pkgsrc. The builtin.mk
file can detect whether the native X11 distribution is the same as
the one provided by pkgsrc, and the version.mk file computes the
version of the X11 distribution package, whether it's built-in or not.
The fourth major change is that the buildlink3.mk files for X11 packages
that install parts which are part of X11 distribution packages, e.g.
Xpm, Xcursor, etc., now use imake to query the X11 distribution for
whether the software is already provided by the X11 distribution.
This is more accurate than grepping for a symbol name in the imake
config files. Using imake required sprinkling various builtin-imake.mk
helper files into pkgsrc directories. These files are used as input
to imake since imake can't use stdin for that purpose.
The fifth major change is in how packages note that they use X11.
Instead of setting USE_X11, package Makefiles should now include
x11.buildlink3.mk instead. This causes the X11 package buildlink3
and builtin logic to be executed at the correct place for buildlink3.mk
and builtin.mk files that previously set USE_X11, and fixes packages
that relied on buildlink3.mk files to implicitly note that X11 is
needed. Package buildlink3.mk should also include x11.buildlink3.mk
when linking against the package libraries requires also linking
against the X11 libraries. Where it was obvious, redundant inclusions
of x11.buildlink3.mk have been removed.
* Dinotrace 9.2a 12/20/2004
** NEWS file is now renamed Changes.
** Added signal note and cursor note menu items. [Shane Coffman]
** Searching for a non-vector signal will now return a vectored signal.
For example a pattern "Foo" will find "Foo[1:0]." [Shane Coffman]
**** Save cursor notes in Customize save files. [Thomas Dmukauskas]
**** Fix compilation errors on GCC 3.4. [Jaroslaw Gorny]
**** Fix segfault when using grid timerep without grid. [Scott Venier]
* Dinotrace 9.1n 10/22/2004
**** Fix slow file reading with >128 bit __en signals. [Ta-Chung Chang]
**** Fix signed analog display. [Uwe Bonnes]
* Dinotrace 9.1m 04/21/2004
*** Fix duplicate and embeded __en cosmos signals. [Krishna Rangan]
**** Fix buffer overrun bugs. [Samuel Ho]
in the process. (More information on tech-pkg.)
Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.
Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.
* Changes in Dinotrace 9.1k 06/06/2003
**** Fix crash with busses that are replicated with different widths.
* Changes in Dinotrace 9.1j 03/22/2003
**** When window is resized, keep same percentage of trace visible.
**** Fix File Reread duplicating signals. [Uwe Bonnes]
**** Fix File Reread with identically named signals.
**** Fix dropping of 0s on signals > 32 bits. [Jason Mancini]
**** Fix coredump on read and GCC 3.2. [Jason Mancini]
From the NEWS file:
* Changes in Dinotrace 9.1i 03/07/2003
*** Display values with appropriate leading 0s. [Dan McMahill]
*** Fix 0 extension of verilog values. [Dominik Strasser, Bill Welch]
Changes in Dinotrace 9.1h 08/30/2002
*** Save_duplicates is now on by default.
**** Fixed several bugs when save_duplicates is enabled.
**** Updated Windows install. [Greg Loxtercamp]
**** Fixed coredump reading wide ascii traces. [Vitaly Oratovsky]
Summary of changes:
- removal of USE_GTEXINFO
- addition of mk/texinfo.mk
- inclusion of this file in package Makefiles requiring it
- `install-info' substituted by `${INSTALL_INFO}' in PLISTs
- tuning of mk/bsd.pkg.mk:
removal of USE_GTEXINFO
INSTALL_INFO added to PLIST_SUBST
`${INSTALL_INFO}' replace `install-info' in target rules
print-PLIST target now generate `${INSTALL_INFO}' instead of `install-info'
- a couple of new patch files added for a handful of packages
- setting of the TEXINFO_OVERRIDE "switch" in packages Makefiles requiring it
- devel/cssc marked requiring texinfo 4.0
- a couple of packages Makefiles were tuned with respect of INFO_FILES and
makeinfo command usage
See -newly added by this commit- section 10.24 of Packages.txt for
further information.
