Existing SHA1 digests verified, all found to be the same on the
machine holding the existing distfiles (morden). Existing SHA1
digests retained for now as an audit trail.
- (patch-openssl__cert.cpp)
Add patch to define MAX_PATH macro
- Unable to package with x11/wxGTK30 yet
(upstream)
- Udate 2.0.3 to 2.1.2
-----------
TQSL-2.1.2
The following links are pointers to TrustedQSL (TQSL) V2.1.2, which is
a bug fix for the official TQSL 2.1 release.
Release Notes TrustedQSL-2-1-release.pdf
http://www.rickmurphy.net/lotw/TrustedQSL-2-1-release.pdf
---------------
xdx-2.5: Function keys F1 - F8 send often used commands to the cluster.
Close dialog when Ctl-Q is used.
Update manual page to current conventions.
-----------------
Version 3.4:
I fixed a bug in the code that implements the modified GS (scaling)
card. In NEC2 the GS card scales all of the structure, but in Xnec2c I
modified the code so that it is possible to specify a range of tag
numbers to apply scaling to only. When a GS card follows a GX card,
selective scaling doesn't work correctly because a symmetric structure
is created. If you are using a GS card, it may be better to avoid
specifying a tag number range, just in case the bug fix is not
complete.
---------------------
## 003.009.000
* X300: Updated DAC ctrl, FPGA toolchain is now entirely Vivado,
improved master clock controls, added ADC self-cal capability,
prepared for revisions 7 and 8, fixed flow control issue which
could cause device to hang when receiving too many overruns
* B2XX: Auto clock rate setting, added PID/VID pairs to support
all B2XX- and derivatives, added temperature sensor, improved
DC offset and IQ imbalance correction, added AGC support,
support for FPGPIO connector on Rev6+ boards, full clock range support,
updated FX3 firmware (side-channel logging capabilities, updated
tx voltage swing, better configurability), default tick rate now
16 MHz, added B200mini support
* E3XX: Added temperature sensor, FPGA toolchain is now entirely Vivado,
improved DC offset and IQ imbalance correction, added AGC support,
improved FPGA capture interface robustness for RFIC, make frame
sizes configurable, replaced GPS control code with gpsd interfacing
capabilities
* Octoclock: Fixed bootloader + ethernet capabilities
* Compilers: Supported MSVC versions are now 2012, 2013, 2015
(dropped 2010 support), added MinGW capabilities
* Documentation: Many minor fixes and updates, merged all the
info from code.ettus.com
* UHD: Added sid_t, CHDR-specific transports now get their own
(un)packer codes, fixed a lot of compiler warnings, added
filter API (currently available for AD9361 frontend), added
soft-register API, replaced Cheetah with Mako, full Py3k
compliance, updated images downloader tool (now is one tool
for all devices), CMake minimum version is now 2.8, refactored
general AD9361 peripheral management, refactored most core
control management, added usb_error type (used by B2xx devices),
better exception handling at runtime, added C wrapper API,
new dependency: python-requests
* C API: Added to UHD (wraps C++ calls in C)
* multi_usrp: Added normalized gain setters/getters, IQ imbalance
+ DC offset correction API, filter API
* Converters: Converter symbols now exported, better logging,
removed ORC dependency, added u8 converters
* Examples: Whitespace- and other cleanup, multi-channel fixes for
some examples
* Utils: Read more property tree types from the command line
* Tools: kitchen sink updated, added mega_fft
-----------------------
- Changes for xlog version 2.0.13 - 2015-apr-19
* Fixed date in cabrillo3 output to be: yyyy-mm-dd
* Fixed date in EDI output to be: yymmdd
* Fixed QSORecords in EDI output
* Updated cty.dat to 20150420 (cty-2505)
* Fixed Bug #44547: Added JT9 modes
* Fixed Bug #44259: broken dupe checking
- set LICENSE= gnu-gpl-v2
(upstream)
- Update 0.9.30 to 0.9.31.2
----------------------------
2007-12-21 rein couperus <rein@couperus.com>
* changed searchlog.c ('possible calls')
2007-12-18 rein couperus <rein@couperus.com>
* changed cluster_bg.c to fix possible buffer overflow
* changed searchlog.c -> compare now starts at beginning of callsign.
- (File/REPLACE_PYTHON) delete non existent files
- (Makefile)
* CONF_FILES setup deleted (etc files no longer installed,
but found at examples directory now)
* MASTER_SITES updated
* ${DESTDIR} is removed from one of CMAKE_ARGS
-DGR_LIBRARY_DIR=${DESTDIR}${PREFIX}/lib
(upstream)
- Update gnuradio-core from 3.7.6 to 3.7.8
---------------------
ChangLog 3.7.7 to 3.7.8 is not known
Release Note for 3.7.7 is at
http://gnuradio.org/redmine/projects/gnuradio/wiki/ChangeLogV3_7_7
- Drop two patches, seems included
(upstream)
- Update 3.7.2 to 3.8.5
Change Log for Releases
==============================
## 003.008.005
* E3xx: Added support for battery-based E3xx device (E312),
get_freq() for network mode, fixed GPS time initialization bug
* AD9361-based devices: Fixed frequency readback bug
* B200: Fixed DCM issues, better loopback failure handling,
fix erroneous warning for custom clock rates
* X3x0: Better warnings for clock reate / ref freq
* multi_usrp: Added define for GPIO capabilities (enables
exposure in GNU Radio)
* UHD: sc16->sc16 SSE converter
* Manual: Multiple minor updates, FPGA manual improvements,
* Build System: Fixed builds on some Windows platforms, removed
stray prints
## 003.008.004
* B200: Fixed EEPROM writing bug, updated images for B200 Rev5/6
* E300: GPS antenna power defaults to staying on, GPS time used as
default if available
* UBX: PDF frequency fix on X300
* USRP2: Bugfix that allows latest UHD to work with USRP2
* Documentation: Many fixes for E300 section, added FPGA manual
## 003.008.003
* UBX: Fixed phase synchronization issues
(Related changes: Change X300 daughterboard frequency, increase
N210 FIFO depth)
* Fixed many compiler warnings
* B200: Fixed timing issues, fixed tick rate issue, stabilized
operations at high clock rates
* X300: Improved phase alignment across devices
* CMake: Build fixes
* E300: Flow control fix
## 003.008.002
* CMake: Introducing named versions for dev branches, enable static libs,
* E300: Docs updates, compat number bump, VCTCXO updates,
more status bits for ref locking, fixed serial number length fix,
RSSI Sensor
* B200: RSSI sensor
* AD9361: Better handling of different interpolation rates in FIR,
fix for gain value truncation, removed gain value offset
* UBX: Added drivers
* Manual/Docs: Numerous updates, minimum compiler versions now specified,
* Converters: Multiple fixes for sc12
* Examples: Fixes to txrx_loopback_to_file
* Path handling vastly improved, made more consistent
* Minor UHD fixes
## 003.008.001
* B2x0: Fixed PLL settings, Fixed external ref selection, serialized
streamer setup (thread-safety)
* X3x0: Fixed flow control issue, improved DAC ctrl + init logic,
Fixed I/Q alignment issue
* Generation-3 devices: Fixed LED registers
* UHD: Improved tuning logic for manual tunes
* Tools: Multiple kitchen sink fixes, coloured output
* Examples: Multiple bugfixes (multi-channel ops)
* Docs/Manual: Multiple fixes, E310 panel images
## 003.008.000
* Added E310 support
* B200/B210: Moved AD9361 controls from firmware to host
* Added several tools: ZPU dissector, improved CHDR dissector,
kitchen sink, B200/B210 USB debugging utility, latency
measurement tool.
* Reorganized firmware/ directory structure. Refactored some
firmware.
* Removed FPGA sources, is now in own repository (submoduled).
* Cleaned up command line arguments for some tools
* Added math namespace, plus a unified float comparison infrastructure
* Fixed tuning-related bugs
* Moved manual over to Doxygen, also several manual bug fixes and
amendments
* Added many missing virtual destructors (less build warnings)
* Added support for NI-RIO 14.0
* X300 fixes: Not found over PCIe with no eth interfaces
* CMake improvements: Now comes with own UHDConfig.cmake and example
to build standalone UHD apps, build fixes on Apple, interoperability
with GNU Radio
* OctoClock fixes and improvements: Ethernet initialization, external
ref detection, stability fixes, host driver (UHD can now talk to
OctoClock)
* Examples: Improved GPIO example, rx_samples_to_file
* Bumped minimum Boost version to 1.46
## 003.007.003
* Fixed examples
* Removed compiler warnings
* Fixed CBX LO settings (FRAC truncation)
* Fixed build issues for out-of-tree tools for some distros
* Fixed some logging strings (SBX, GPSDO)
* Improved logging (speedups, removed unnecessary cycles)
* Added output sync for DAC reference clocks on X300
* Multiple FPGA improvements, as well as upgrade of build env
* Added support for B200 vs B210 discovery
(from doc/xnec2c.html)
-----------------
Version 3.3:
I fixed a bug that was in the code that reads the commands
from the NEC2 input file, where xnec2c would crash with a
segmentation fault when the FR card was after the RP
card. Also modified the Strtod() function to avoid freeing the
end pointer before it was used, causing problems.
- Following patch added to give sphinx-build name (with ${PYVERSSUFFIX) attached)
gnuradio-core/patches/patch-cmake_Modules_FindSphinx.cmake
- Depending doxygen-1.8.9.1nb1 now
- gnuradio-doxygen is updated 3.7.5.2nb1 to 3.7.6
(upstream)
- Update gnuradio-* from 3.7.5.2 to 3.7.6
---------------------------------------
GNU Radio releases 3.7.6 and 3.7.5.2 are available for download:
(several tens of lines omitted for URL and List of contributors)
Release 3.7.5.2 is a bug-fix only maintenance patch following 3.7.5.1,
and will be the last one for the 3.7.5 release. Release 3.7.6
incorporates all these fixes and adds significant new features.
---------------
(From http://git.osmocom.org/gr-osmosdr/log/)
2014-11-04 update version to 0.1.4 Dimitri Stolnikov
2014-11-03 bladeRF: Don't fail out until 3 consecutive errors have occurred Jon Szymaniak
2014-11-03 bladeRF: Default num_transfers to min(32, num_buffers/2) Jon Szymaniak
2014-11-03 bladeRF: Removed unused bladerf_metadata parameter from rx/tx calls Jon Szymaniak
2014-10-21 hackrf: update copyright for SSE/AVX routines Dimitri Stolnikov
2014-10-21 hackrf: disable AMP gain stage by default to protect it from damage Dimitri Stolnikov
2014-10-21 source/sink: don't discover devices if already specified via args Dimitri Stolnikov
Add PLIST.oss to be anonther removing PLIST other than gnuradio-core packages.
(One more, move the line location of comment lines next to the line to explain)
The explicit use of .so in the shared lib causes a problem.
I've also set UHD_DIR in the environment in the UHD buildlink3.mk file
which should make these two CMAKE_ARGS unnecessary
