- removed packages p5-IO-Compress-Base, p5-IO-Compress-Zlib,
p5-IO-Compress-Bzip2 and p5-Compress-Zlib because they are
merged into p5-IO-Compress
- Updated dependend packages to depend on p5-IO-Compress
and bump PKGREVISION
Upstream changes:
2.017 30 March 2009
* Merged IO-Compress-Base, IO-Compress-Bzip2, IO-Compress-Zlib &
Compress-Zlib into IO-Compress.
* The interface to Compress-Raw-Zlib now uses the new LimitOutput
feature. This will make all of the zlib-related IO-Compress modules
less greedy in their memory consumption.
* Removed MAN3PODS from Makefile.PL
* A few changes to get the test harness to work on VMS courtesy of
Craig. A. Berry.
* IO::Compress::Base & IO::Uncompress::Base
Downgraded some croaks in the constructors to just set $! (by letting
the code attempt to open a file and fail).
This makes the behavior more consistent to a standard open.
[RT #42657]
* IO::Uncompress::Base
Doing a seek with MultiStream could drop some of the uncompressed
data. Fixed.
* IO::Compress::Zip
- Fixed problem with the uncompressed & uncompressed fields when
zip64 is enabled. They were set to 0x0000FFFF instead of
0xFFFFFFFF. Also the ZIP64 extra field was 4 bytes short.
Problem spotted by Dino Chiesa.
* IO::Uncompress::Unzip
- use POSIX::mktime instead of Time::Local::timelocal to convert
the zip DOS time field into Unix time.
* Compress::Zlib
- Documented Compress::Zlib::zlib_version()
This changes the buildlink3.mk files to use an include guard for the
recursive include. The use of BUILDLINK_DEPTH, BUILDLINK_DEPENDS,
BUILDLINK_PACKAGES and BUILDLINK_ORDER is handled by a single new
variable BUILDLINK_TREE. Each buildlink3.mk file adds a pair of
enter/exit marker, which can be used to reconstruct the tree and
to determine first level includes. Avoiding := for large variables
(BUILDLINK_ORDER) speeds up parse time as += has linear complexity.
The include guard reduces system time by avoiding reading files over and
over again. For complex packages this reduces both %user and %sys time to
half of the former time.
version 2.26.0
--------------
New or updated application translations:
* Assamese (Amitakhya Phukan)
* Bengali INDIA (Runa Bhattacharjee)
* Español (Jorge González)
* Estonian (Ivar Smolin)
* Galego (Suso Baleato)
* Greek (Jennie Petoumenou)
* Gujarati (Ankit Patel)
* Hebrew (Gil Osher)
* Hindi (Rajesh Ranjan)
* Lithuanian (Vytautas Rekus)
* Maithili (Sangeeta Kumari)
* marathi (Sandeep Shedmake)
* Oriya (Manoj Kumar Giri)
* Russian (Anton Shestakov)
* Swathanthra Malayalam Computing|സ്വതന്ത്ര
മലയാളം കമ്പ്യൂട്ടിങ് (Ani Peter)
* Tamil (I. Felix)
* Telugu (Krishna Babu K)
New or updated manual translations:
* British English (Philip Withnall)
version 2.25.92
---------------
New or updated application translations:
* English (British) (David Lodge)
* Bulgarian (Alexander Shopov)
* Czech (Adrian Guniš)
* Hungarian (Gabor Kelemen)
* Italian (Milo Casagrande)
* Japanese (Takeshi AIHANA)
* Swedish (Daniel Nylander)
* Turkish (Baris Cicek)
New or updated manual translations:
* Swedish (Daniel Nylander)
version 2.25.91
---------------
Bugs fixed:
* #571273: crash in Archive Manager: Opening an archive (ISO)
Patch by Tom Parker.
* #560429: GNOME Goal: Remove deprecated GLib symbols
* #570505: file-roller crashed with signal 5 in IA__g_malloc()
New or updated application translations:
* Asturian (Astur)
* Aviary.pl (Tomasz Dominikowski)
* Basque (Iñaki Larrañaga Murgoitio)
* Belarusian Latin (Ihar Hrachyshka)
* Brazilian Portuguese (Fabrício Godoy)
* Bulgarian (Alexander Shopov)
* Chinese (Hong Kong) (Chao-Hsiung Liao)
* Chinese/Traditional (Chao-Hsiung Liao)
* Danish (Kenneth Nielsen)
* Dutch (Wouter Bolsterlee)
* Español (Jorge González)
* French (Claude Paroz)
* Kannada (Shankar Prasad)
* Macedonian (Arangel Angov)
* Portuguese (Duarte Loreto)
* Romanian (Adi Roiban)
* Serbian (sr) (Горан Ракић)
* Serbian (sr) (Goran Rakić)
* Thai (Theppitak Karoonboonyanan)
* Ukrainian (Maxim Dziumanenko)
* Vietnamese (Clytie Siddall)
* zh_CN (甘露(Gan Lu))
version 2.25.90
---------------
New features and user visible changes:
* Use gtkbuilder instead of libglade.
Bugs fixed:
* #568881: don't rely on gtk implementation details
* #569825: file-roller should use TMPDIR or XDG_CACHE_HOME for
temporary files.
New or updated application translations:
* Brazilian Portuguese (Fabrício Godoy)
* Catalan (Jordi Mallach)
* Deutsch (Christian Kirbach)
* Finnish (Ilkka Tuohela)
* Hungarian (Gabor Kelemen)
* Korea (Changwoo Ryu)
* Swedish (Daniel Nylander)
version 2.25.2
--------------
Bugs fixed:
* #567554: An error occurred while adding files to the archive after
encrypt the zip archive.
* #566591: File roller cannot create splitted archives with pieces
smaller than 1 Mb
* #560647: file-roller wakes up the CPU 2 times per second.
* #563208: file-roller can't extract to an ftp mounted directory.
Patch by Gerard Lommerse.
* #564029: Unziping an archive from nautilus fails with certain
characters.
* #565879: isoinfo.sh has shebang but is installed -x Patch by Loïc
Minier.
* #567901: renaming directory in tarball creates duplicate files
* #568260: file-roller installs static libraries by default (for
nautilus extension)
* #566683: remove redundant figures
New or updated application translations:
* Español (Jorge González)
* Norwegian Bokmål (Kjartan Maraas)
* zh_CN (甘露(Gan Lu))
version 2.25.1
--------------
Bugs fixed:
* #564805: Drop libgnome/ui dependency. Patch by Saleem Abdulrasool.
* #561535: Unable to create archive with OpenOffice document using
nautilus integration. Patch by Gerard Lommerse.
* #559481: Can't open/view file directly from File Roller if there
is a bracket in the directory/file name. Patch by Gerard Lommerse.
New or updated manual translations:
* Catalan (Joan Duran)
- Updating to 1.46
Upstream changes:
* important changes in version 1.46 05/03/2009:
- Address: bug #43513: [PATCH] Accept wrong checksums from SunOS and HP-UX tar
like GNU tar does. See here for details:
http://www.gnu.org/software/tar/manual/tar.html#SEC139
- make COMPRESS_BZIP and COMPRESS_GZIP constants actually work and fix their
documentation
Oked by rhaen@
Import of new archivers/sapcar to extract *.SAR archives provided by
SAP AG for their packages.
SAPCAR (older version was called CAR) is a compress utility (similar to
winzip, tar, zip, gz, etc.) , that is used by SAP to compress and decompress
nearly all delivered files and executables.
On 09/15/08 05:46 UTC, OBATA Akio <obache@netbsd.org> wrote:
> Personally, I think that those packages may exist.
On 09/15/08 09:41 UTC, Jonathan Groll <lists@groll.co.za> wrote:
> I for one would be most grateful if you could get this to work.
Oked by joerg@
* From Windows version of 7-zip 4.62 to 4.65
* The bug in 7-Zip 4.63 was fixed: 7-Zip could not decrypt .ZIP archives
encrypted with WinZip-AES method.
* 7-Zip now can unpack ZIP archives encrypted with PKWARE-AES.
* Some bugs were fixed.
* Fixed : the RAM size was reported incorrectly on MacOSX 64bits
* Fixed : makefile.linux_amd64_asm_icc
* DJGPP :
makefile.djgpp becomes makefile.djgpp_old
makefile.djgpp_watt added (thank to Rugxulo)
* you can now compile 7za with a cmake project (see README)
the cmake project can build a codeblock project ;)
Remark : the kdevelop3 or Eclipse/CDT4 project don't work :(
* important changes in version 1.44 19/01/2009:
- Address #41798: Nonempty $\ when writing a Tar file produces a
corrupt Tar file
- Textual fix to Makefile.PL diagnostics
gtar cowardly refuses to build if time_t doesn't fit in "long int",
as happens to be the case now on 32-bit NetBSD hosts.
Supress the error and turn it into a warning instead.
"make test" still OK
Changelog:
-no changelog for 1.41-
* important changes in version 1.42 13/12/2008:
- Address #40426: Archive Tar to support direct Archive::Tar::File adds
It is now possible to add Archive::Tar::File objects via $tar->add_files
- Address #40016 (Archive::Tar assumes $> won't change): CAN_CHOWN is now a
dynamic check upon extraction. This allows scripts to drop privileges when
desired
- Address take 2 of #39933: [PATCH] handle ../ directory name on VMS
John M. sent in a better way to do directory name translation.
version 2.24.3
--------------
Bugs fixed:
* #561535: Unable to create archive with OpenOffice document using
nautilus integration. Patch by Gerard Lommerse.
* #559481: Can't open/view file directly from File Roller if there
is a bracket in the directory/file name. Patch by Gerard Lommerse.
* #560468: Remove single GTK+ includes. Patch by Maxim Ermilov.
New or updated manual translations:
* Catalan (Joan Duran)
Changes in 1.0.5 (Jan 08, 2009)
- Now properly complains about trying to read or write compressed
data to terminal, and exits
- Further fixed CPU detection crash
- Updated Makefile to force deletion when cleaning
Changes in 1.0.4 (Dec 21, 2008)
- Added support to use pbzip2 with tar (--use-compress-prog=pbzip2).
- Added support for all remaining bzip2 command line options so
pbzip2 can be used as a drop-in replacement for bzip2.
- Fixed bug that would cause pbzip2 to crash if detection of the
number of processors failed.
- Now prevents uclibc from being exposed to its lack of a
getloadavg function.
Changes in 1.0.3 (Oct 31, 2008)
- Added support for compression using stdin and pipes! Thanks
to Ivan Voras for supplying the patch to enable this feature.
- Added support for decompression using stdin and pipes but
currently limited to only a single thread
- Added support for testing bzip2 files using stdin and pipes
- Added support to directly decompress files without using
threads when files are small or the system only has 1 CPU.
This mode is also used if the .bz2 file contains only 1
bzip2 stream.
- Added support to compress 0 byte files like bzip2
- Added support for pbzcat symlink to automatically specify
decompression mode to stdout, just like bzcat
- Increased max supported path and filename from 255 to 2048
characters
- Updated RPM spec to support SUSE Linux
- Updated help display to show how many CPUs autodetect has found
- Code cleanup
- From Windows version of 7-zip 4.61 :
- 7-Zip now supports LZMA compression for .ZIP archives.
- Some bugs were fixed.
- Fix: Ask for password twice when creating encrypted archive
- 7zG added (read GUI/readme.txt)
Changes 4.60:
- From Windows version of 7-zip 4.60 :
- Some bugs were fixed
- p7zip didn't use the BCJ /BCJ2 filters for executables (:
- makefile.linux_amd64_asm_icc added
Changes 4.59:
- From Windows version of 7-zip 4.59 :
- 7-Zip now can unpack UDF, XAR and DMG/HFS archives.
- It's allowed to use -t switch for "list" and "extract" commands.
- Some bugs were fixed.
XXX: Automatic handling and plain entries don't work for symlinks
for ptar and ptardiff, no idea why. Added PLIST entries like the following
for this reason:
@unexec ${RM} -f %D/bin/ptar 2>/dev/null || ${TRUE}
* important changes in version 1.40 13/10/2008:
- Add $class->has_zlib_support and $class->has_bzip2_support to
discern which A::T can support
- Address: #39933: [PATCH] handle ../ directory name on VMS (core patch)
* important changes in version 1.39_04 08/09/2008:
- Address: #38932: pax_global_header extracted as file
Don't extract these special files, which are added by, among
others, git-generated tarballs. It holds a comment and is not
meant for extraction. This follows gnu tar 1.14 and later behaviour
- Address: #19577: extract_file() drops volume part of extraction path
Windows users can now extract files to a different volume
* important changes in verison 1.39_03 26/08/2008:
- Because all the IO::Compress modules are interlinked, they must be
the same version when installed, or breakage will occur like shown
at this tester report:
http://www.nntp.perl.org/group/perl.cpan.testers/2008/08/msg2083310.html
Mailed the author to find a less fragile solution, but for now we require
all the individual modules, and all at the same version.
* important changes in version 1.39_02 25/08/2008:
- Address #31806: Please add support for bzipped tar files.
Archive::Tar now supports reading/writing tar.bz2 files.
- Since IO::Zlib is now core, it is now a default dependency.
- Added Package::Constants as a dependency to ease the use of A::T::Constants
- Dependency on IO::Compress::Bzip2 and IO::Uncompress::Bunzip2 is on
by default, but can be negated with the -n switch when building:
'perl Makefile.PL -n'
- Improve documentation on the new ->iter function
* important changes in version 1.39_01 22/08/2008:
- Address the second part mentioned in this report:
#30380: directory traversal vulnerability in Archive-Tar
Archives are no longer allowed to extract into symlinked directories,
unless Insecure Extract Mode is enabled (which is off by default).
- Add regression tests for this behaviour
- Address #33669 (Could not update timestamp warning on symlinks)
Don't update timestamps on symlinks, they'll modify the original
- Apply core patch: [patch@33971] Archive::Tar was building corrupt
archives on VMS as supplied by John Malmberg
- Address #37375: ptar should allow '-' as an archive_file name
Patch provided by glenn jackman
- Add convenience method ->extract() to A::T::File
- improve docs of A::T::File by adding rv & object in the header
- Address #38580: [PATCH] Archive::Tar->iter
This adds an iterator to Archive::Tar, thanks to Gisle Aas
version 2.24.1
--------------
Bugs fixed:
* #556623: correct spacings in glade dialogues. Patch by Christian
Persch.
* #556619: format not a string literal and no format arguments.
Patch by Christian Persch.
* #556571: non secret password typing.
* #555282: opening archive on remote directory fails with "Operation
not supported".
New or updated application translations:
* Arabic (Anas Afif Emad)
* Brazilian Portuguese (Fábio Nogueira)
* Czech (Adrian Guniš)
New or updated manual translations:
* Finnish (Valto Wirkola)
Upstream changes:
1.26 Mon 13 Oct 2008 - Adam Kennedy
- Fixed the dreaded but #24036: WinXP Explorer Exposes Problems.
This caused directories to appear as files in Windows Explorer
and was caused by Windows always reading the msdos directory bit
even when the file attributes are types as unix.
Resolved by emulating the behaviour of Info-Zip and setting
the 5th bit in the externalFileAttributes field.
1.25 Sat 11 Oct 2008 - Adam Kennedy
- Removing "use warnings" instances that somehow slipped in
- Skip test if Digest::MD5 is not available
to trigger/signal a rebuild for the transition 5.8.8 -> 5.10.0.
The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=...").
LZMA Utils is a set of utilities for LZMA compression and decompression.
They aim to have an interface very similar to the well known gzip and
bzip2 utilities.
Fixes build of pkgsrc/archivers/bsdtar on some systems, no functional change
intended on systems that already successfully built.
Ok'd during freeze by joerg@ and agc@
