rillig
8c6aee8563
lang: align variable assignments
...
pkglint -Wall -F --only aligned --only indent -r
No manual corrections.
2019-11-03 19:03:56 +00:00
gutteridge
0bb8fd3f86
ghc: adjust patch to allow for Perl >= 5.30
2019-10-25 08:55:46 +00:00
wiz
84e123ddd2
Bump PKGREVISIONs for perl 5.30.0
2019-08-11 13:17:48 +00:00
nia
c66ee34855
Follow some http->https redirects.
2019-07-08 10:36:25 +00:00
rillig
c7ff05f63e
all: replace SUBST_SED with the simpler SUBST_VARS
...
pkglint -Wall -r --only "substitution command" -F
With manual review and indentation fixes since pkglint doesn't get that
part correct in every case.
2019-05-23 19:22:54 +00:00
wiz
93b46879c7
Recursive bump for perl5-5.28.0
2018-08-22 09:43:40 +00:00
jperkin
5393242c73
*: Move SUBST_STAGE from post-patch to pre-configure
...
Performing substitutions during post-patch breaks tools such as mkpatches,
making it very difficult to regenerate correct patches after making changes,
and often leading to substituted string replacements being committed.
2018-07-04 13:40:07 +00:00
wiz
2b0a009d0e
Bump PKGREVISION for perl-5.24.0 for everything mentioning perl.
2016-07-09 06:37:46 +00:00
agc
54622f28e2
Add SHA512 digests for distfiles for lang category
...
Problems found with existing digests:
Package nhc98 distfile nhc98src-1.22.tar.gz
a8adc8f22371998ee0657bc0e01058a57d876abc [recorded]
81975fcb5f1dda5efeaabc30ce8c6dceae55e591 [calculated]
Problems found locating distfiles:
Package gcc-aux: missing distfile ada-bootstrap.i386.dragonfly.36A.tar.bz2
Package gcc-aux: missing distfile ada-bootstrap.i386.freebsd.84.tar.bz2
Package gcc-aux: missing distfile ada-bootstrap.x86_64.dragonfly.36A.tar.bz2
Package gcc-aux: missing distfile ada-bootstrap.x86_64.freebsd.84.tar.bz2
Package gcc-aux: missing distfile ada-bootstrap.x86_64.solaris.511.tar.bz2
Package gcc5-aux: missing distfile ada-bootstrap.i386.dragonfly.36A.tar.bz2
Package gcc5-aux: missing distfile ada-bootstrap.i386.freebsd.84.tar.bz2
Package gcc5-aux: missing distfile ada-bootstrap.x86_64.dragonfly.36A.tar.bz2
Package gcc5-aux: missing distfile ada-bootstrap.x86_64.freebsd.84.tar.bz2
Package gcc5-aux: missing distfile ada-bootstrap.x86_64.solaris.511.tar.bz2
Package ghc7: missing distfile ghc-7.6.3-boot-i386-unknown-freebsd.tar.xz
Package icc11: missing distfile l_cproc_p_11.1.080.tgz
Package jini: missing distfile jini-1_2_1_001-src.zip
Package oo2c: missing distfile oo2c_32-2.0.11.tar.bz2
Package openjdk7: missing distfile openjdk7/bootstrap-jdk-1.7.76-freebsd-10-amd64-20150301.tar.xz
Package openjdk7: missing distfile openjdk7/bootstrap-jdk-1.7.76-netbsd-5-i386-20150301.tar.xz
Package openjdk7: missing distfile openjdk7/bootstrap-jdk-1.7.76-netbsd-6-i386-20150301.tar.xz
Package openjdk7: missing distfile openjdk7/bootstrap-jdk-1.7.76-netbsd-7-earmv6hf-20150306.tar.xz
Package openjdk7: missing distfile openjdk7/bootstrap-jdk-1.7.76-netbsd-7-sparc64-20150301.tar.xz
Package openjdk7: missing distfile openjdk7/bootstrap-jdk7u60-bin-dragonfly-3.8-amd64-20140719.tar.bz2
Package openjdk8: missing distfile openjdk7/bootstrap-jdk-1.7.76-freebsd-10-amd64-20150301.tar.xz
Package openjdk8: missing distfile openjdk7/bootstrap-jdk-1.7.76-netbsd-5-i386-20150301.tar.xz
Package openjdk8: missing distfile openjdk7/bootstrap-jdk-1.7.76-netbsd-6-i386-20150301.tar.xz
Package openjdk8: missing distfile openjdk7/bootstrap-jdk-1.7.76-netbsd-7-earmv6hf-20150306.tar.xz
Package openjdk8: missing distfile openjdk7/bootstrap-jdk-1.7.76-netbsd-7-sparc64-20150301.tar.xz
Package openjdk8: missing distfile openjdk7/bootstrap-jdk7u60-bin-dragonfly-3.8-amd64-20140719.tar.bz2
Package oracle-jdk8: missing distfile jdk-8u60-linux-i586.tar.gz
Package oracle-jdk8: missing distfile jdk-8u60-solaris-x64.tar.gz
Package oracle-jre8: missing distfile jre-8u60-linux-i586.tar.gz
Package oracle-jre8: missing distfile jre-8u60-solaris-x64.tar.gz
Package sun-jdk6: missing distfile jdk-6u45-linux-i586.bin
Package sun-jdk6: missing distfile jdk-6u45-solaris-i586.sh
Package sun-jdk7: missing distfile jdk-7u72-linux-i586.tar.gz
Package sun-jdk7: missing distfile jdk-7u72-solaris-i586.tar.gz
Package sun-jre6: missing distfile jce_policy-6.zip
Package sun-jre6: missing distfile jre-6u45-linux-x64.bin
Package sun-jre6: missing distfile jre-6u45-solaris-x64.sh
Package sun-jre7: missing distfile jre-7u72-linux-i586.tar.gz
Package sun-jre7: missing distfile jre-7u72-solaris-i586.tar.gz
Otherwise, existing SHA1 digests verified and found to be the same on
the machine holding the existing distfiles (morden). All existing
SHA1 digests retained for now as an audit trail.
2015-11-03 22:50:31 +00:00
joerg
d4bf2811ab
Explicitly restrict upper version, ghc and ghc7 have incompatible
...
buildlink3.mk files.
2015-06-28 16:32:25 +00:00
wiz
0982effce2
Recursive PKGREVISION bump for all packages mentioning 'perl',
...
having a PKGNAME of p5-*, or depending such a package,
for perl-5.22.0.
2015-06-12 10:48:20 +00:00
dholland
e5c2a73926
document ONLY_FOR_PLATFORM
2015-01-04 08:03:50 +00:00
dholland
f0c1b78a85
Recognize more Perl versions.
2014-06-27 06:51:22 +00:00
wiz
7eeb51b534
Bump for perl-5.20.0.
...
Do it for all packages that
* mention perl, or
* have a directory name starting with p5-*, or
* depend on a package starting with p5-
like last time, for 5.18, where this didn't lead to complaints.
Let me know if you have any this time.
2014-05-29 23:35:13 +00:00
dholland
96f66d6274
After all the Sturm und Drang, it turns out the only thing needed for
...
DESTDIR support in ghc is to turn it on. Sigh.
Remove BROKEN.
2013-12-06 06:20:00 +00:00
wiz
f2af607bad
Mark remaining packages not support DESTDIR as BROKEN as decided
...
by pkgsrc-pmc.
If you are interested in one of these, please fix it before 2013Q4.
2013-10-24 10:31:02 +00:00
ryoon
f8e628f818
* .include "../../devel/readline/buildlink3.mk" with USE_GNU_READLINE=yes
...
are replaced with .include "../../devel/readline/buildlink3.mk", and
USE_GNU_READLINE are removed,
* .include "../../devel/readline/buildlink3.mk" without USE_GNU_READLINE
are replaced with .include "../../mk/readline.buildlink3.mk".
2013-07-15 02:02:17 +00:00
schmonz
b7460d96e2
Let this build with Perl 5.18.
2013-06-12 14:54:15 +00:00
wiz
d2ca14a3f1
Bump all packages for perl-5.18, that
...
a) refer 'perl' in their Makefile, or
b) have a directory name of p5-*, or
c) have any dependency on any p5-* package
Like last time, where this caused no complaints.
2013-05-31 12:39:57 +00:00
minskim
b662ccab66
Make ghc build with perl-5.16.
2012-10-15 18:13:42 +00:00
wiz
8b5d49eb78
Bump all packages that use perl, or depend on a p5-* package, or
...
are called p5-*.
I hope that's all of them.
2012-10-03 21:53:53 +00:00
jperkin
fc6894b391
Add support for SunOS-*-i386. Tested on 32-bit SmartOS.
2012-08-17 15:49:35 +00:00
asau
010650399c
Mark packages with no staged installation support explicitly (PKG_DESTDIR_SUPPORT=none).
2012-08-14 17:07:55 +00:00
dholland
7e751949e4
Set BUILDLINK_ABI_DEPENDS correctly (with +=, not ?=)
...
It turns out there were a lot of these.
2012-05-07 01:53:12 +00:00
wiz
f434e933a9
Allow perl-5.14. Not that it helps me, but perhaps some i386 users.
...
Requested by Noud de Brouwer in PR 45725.
2012-02-02 12:32:32 +00:00
kristerw
5997e6333f
Fix build issue when using gmake 3.82.
2010-10-31 19:05:01 +00:00
jwise
f62ea880c3
Accept perl 5.12, not just 5.10 when checking in configure for `new enough'
...
perl.
2010-09-24 14:32:50 +00:00
asau
1807ff2338
Recursive revision bump for GMP update, 2nd part.
2010-03-24 21:54:15 +00:00
asau
00708ce7e3
Recursive revision bump for GMP update.
2010-03-24 19:43:21 +00:00
joerg
62d1ba2bac
Remove @dirrm entries from PLISTs
2009-06-14 18:03:28 +00:00
wiz
272d51cc21
Recursive ABI depends update and PKGREVISION bump for readline-6.0 shlib
...
major change.
Reported by Robert Elz in PR 41345.
2009-05-20 00:58:05 +00:00
joerg
2d1ba244e9
Simply and speed up buildlink3.mk files and processing.
...
This changes the buildlink3.mk files to use an include guard for the
recursive include. The use of BUILDLINK_DEPTH, BUILDLINK_DEPENDS,
BUILDLINK_PACKAGES and BUILDLINK_ORDER is handled by a single new
variable BUILDLINK_TREE. Each buildlink3.mk file adds a pair of
enter/exit marker, which can be used to reconstruct the tree and
to determine first level includes. Avoiding := for large variables
(BUILDLINK_ORDER) speeds up parse time as += has linear complexity.
The include guard reduces system time by avoiding reading files over and
over again. For complex packages this reduces both %user and %sys time to
half of the former time.
2009-03-20 19:23:50 +00:00
markd
9ca9a2327f
Fix build with perl 5.10.
...
As perl 5.6 wont be seen in a pkgsrc context just replace the test for
5.6 with one for 5.10 rather than a more substantial change.
2008-11-03 10:08:15 +00:00
kristerw
40df28eb7b
Update ghc to 6.8.3. Thanks to Donn Cave for bugfix patches.
...
Changes in 6.8.3:
* The arguments to ghc-pkg now understand lists and wildcards, and
there is a new command ghc-pkg find-module.
* The filename completion in ghci is now more intelligent.
* We now look for GHCi config files in these locations:
./.ghci
$HOME/.ghc/ghci.conf
$HOME/.ghci
* You can now give multiple -e options to GHC.
* You can now use the -prof and -threaded flags together, although
you cannot also use +RTS -N2.
* SCC names are no longer allowed to contain spaces, as some of the
profiling tools break if they do.
* Various changes have been made to GHC's internals, so there are some
differences in the API exposed by the ghc package. Most notably,
checkAndLoadModule has now been implemented.
2008-07-20 00:26:52 +00:00
kristerw
e34728f68f
Use the correct renamed symbol for sigprocmask.
...
Solves PR pkg/38510.
Bump PKGREVISION.
2008-07-07 14:58:00 +00:00
cjs
a37f81bb1c
Fix another system library symbol versioning problem, this time with
...
socket(), and bump PKGREVISION.
2008-03-31 06:18:12 +00:00
kristerw
2e9dd53236
Use the correct renamed symbols for opendir, unsetenv, and times.
...
Solves PR pkg/38263.
Bump PKGREVISION.
2008-03-24 22:40:23 +00:00
kristerw
722ad1956b
Update ghc to version 6.8.2.
...
The major changes in this release are adding Haskell Program Coverage (hpc)
support to the compiler, adding a debugger to GHCi, the first phase of the
base package split, and pointer tagging in the code generator (which should
mean most code improves by 10-15%, and as a result the compiler is also
faster).
Most of this upgrade was done by Paulo Matias in pkgsrc-wip.
2008-03-17 15:33:10 +00:00
rillig
e098c81361
Matt Fleming said on tech-pkg that this package builds and installs find
...
on Darwin-*-i386.
2007-08-18 23:39:26 +00:00
rillig
877c171288
Shell scripts should not use the += operator for variable assignments.
...
In this case, the += operator appears in an embedded AWK script, so it
is ok.
2007-06-25 21:18:37 +00:00
obache
62d114f286
Also works on OpenBSD-*-i386. Pointed out by Emil Skoeldberg in PR 36231.
2007-05-09 13:47:01 +00:00
kristerw
3a26d15a41
Update lang/ghc to 6.6.1.
...
Many, many bugs have been fixed relative to 6.6. Far too many to list here.
The other changes in this release are:
* GHC works on Windows Vista.
* GHC can now be used to compile C++ files.
* There is an --install-signal-handlers=<yes|no> RTS flag. The main use is
to stop GHC installing signal handlers when you are putting your code in
a DLL.
* Newtypes can now be defined using GADT syntax.
* Linear implicit parameters are no longer accepted.
* There is a manpage for ghc and ghci.
* The building guide has been moved to the wiki.
* GHC now comes with the filepath library.
2007-04-29 22:12:02 +00:00
kristerw
e05ef3d8ed
Update ghc to version 6.6.
...
This version represent >19 month of development since the version 6.4,
and the list of changes is far too big to include here. See
http://www.haskell.org/ghc/docs/6.6/html/users_guide/release-6-6.html
for the list of user visible changes.
2007-03-24 17:57:19 +00:00
kristerw
0ec343cdf3
The NetBSD bootstrap kit works for FreeBSD too.
2006-11-12 21:58:38 +00:00
rillig
dd54e26d30
Fixed "test ==".
2006-10-14 02:45:10 +00:00
wiz
ddea2deec6
Fix typo and duplicate word in comment.
2006-07-31 18:10:00 +00:00
kristerw
13d544ffb2
Update the bootstrap kit to make this build on NetBSD-current too.
...
Fix some hardcoded paths.
Bump PKGREVISION.
2006-07-31 02:07:13 +00:00
kristerw
f3baf6fe2c
Correct PLIST and distinfo.
...
Bump PKGREVISION.
2006-07-27 23:45:08 +00:00
jlam
ccdf6dbe01
Rename "SITES_* to "SITES.*" for file-specific lists of sites from which
...
to fetch the file. This completes the renaming described in revision
1.1799 of bsd.pkg.mk.
2006-07-27 18:48:02 +00:00
augustss
1ac5ce6f07
Update from ghc 6.4.1 to ghc 6.4.2.
...
I can't find any description of what has changed, but it's bug fixes
as far as I know.
2006-07-09 12:22:05 +00:00