Change Log for New E (NE)
-------------------------
Version 3.02 15-May-12
----------------------
1. The icurrent command did not remove the line number from the line it copied.
2. Cutting and pasting did not always remove line numbers, as it is documented
to do.
3. Some additional information has been added to the output from "show
settings".
Version 3.01 02-Mar-12
----------------------
1. There were bugs in the table the controls what commands may be obeyed in
read-only mode. For example, the "readonly" command was not allowed, so the
mode could not be turned off. Doh! In addition, the single-character
commands such as # ? etc. were not correctly handled in readonly mode;
neither were bracketed groups nor procedures. Using any of these commands
caused segfaults.
Version 3.00 23-Feb-11
----------------------
1. Rather than just fixing an out-by-one bug in eversion.c, I re-designed how
it works. Added the copyright notice to the -help output. Added a lot more
casts for signed/unsigned chars so that it compiles clean with -Wall on today's
compilers (it's been over 5 years since the last release).
2. Renamed configure.in as configure.ac in line with modern practice, and did
some tidying/updating of the configure and make files.
3. Made --help a synonym of -help, and added -v and --version as synonyms of
(the very ancient) -id.
4. Removed the -stream facility, as it seems redundant nowadays.
5. Fixed reference to unset memory in rdargs.c.
6. Removed redundant code for various special (no longer existing) terminal
types, and unused code for the Acorn windowing environment. The only special
terminal type now recognized is xterm. Also removed the unixregexp command,
which used to switch between different regex types, but has been obsolete for
ages.
7. In screen mode, test whether an xterm is set to UTF-8, and adjust output
accordingly. UTF-8 sequences are sent for certain characters whose code points
are greater than 127. Characters that do not occupy exactly one cell on an
xterm display are displayed as the substitute character (defaulting to a
question mark). These include zero-width and double-width characters.
Characters with code points greater than 0xFFFF are also substituted.
8. If -w[idechars] is specified, or the "widechars on" command is obeyed,
recognize valid wide UTF-8 characters in the text being edited, without
modifying the text bytes. A top-bit-set byte that is not part of a valid UTF-8
character is treated as a single-byte character. This affects how data lines
are displayed on the screen and in verification output. You can flip between
modes during an editing session.
9. "Show wordcount" was including line-ending characters in its character
count, contrary to its documentation. Of course, previously it was just a byte
count. It now shows both a byte count and a character count in wide character
mode, in both cases excluding line ending characters. Words are now delimited
by either tabs or spaces (previously it was just spaces). The output is now on
multiple lines.
10. Added new keyboard escapes for inputting Unicode characters, for example,
ESC A ' for aacute. Also recognize ESC U or ESC u followed by up to 5 hex
digits (short-terminated by a non-hex digit or another ESC). This feature
applies only to input in screen mode because in line-by-line mode the commands
are read using standard C input functions.
11. While implementing 8/9/10, several old bugs/infelicities were found and
fixed:
(a) In the code for formatting paragraphs, if the begin/end paragraph
settings did not include indented lines, and some lines of a paragraph
were indented less than earlier lines, characters could sometimes get
scrambled.
(b) Characters deleted by keystroke while in overstrike mode did not get
remembered for recall by "undelete".
(c) Some redundant arguments for certain functions were discovered and
removed (they probably related to code for environments no longer
supported which itself has gone).
(d) If a command line from a .nerc file was recovered by the use of the
"up" key in a screen command line, the final newline was still present,
and displayed as "?".
12. When running in an xterm, NE now recognizes a left-button mouse click in
the window, and moves the cursor appropriately. It also recognizes twiddling
the wheel in a wheel mouse, and for each twiddle scrolls the screen up or down
by an amount that can be set by "set autovmousescroll" (default 1). The current
line is changed only if it would disappear off the screen. The "mouse" command
can be used to turn mouse recognition on and off. Unfortunately, you have to
turn it off if you want to use normal xterm cut-and-paste.
13. NE was maintaining a value in a variable called main_currentlinenumber, but
never actually using it for anything. This must be an historic relic. Removing
it does not seem to have broken anything.
14. When writing a file, NE was not testing for an error on the fclose() call
at the end. Errors can happen here if, for example, the system is buffering the
output and a quota overrun is not detected until fclose().
15. When "show keys" was issued in screen mode, NE was pausing for interaction
more often than actually necessary if the screen or window was relatively deep.
It now notices the available depth.
16. The subchar command now allows for altering the character that is
substituted on screen for undisplayable characters.
Version 2.01 06-Jun-05
----------------------
1. Lines whose length was between 32768 and 65535 were ending up with
negative lengths because I was using short int rather than unsigned short
int. They showed up therefore as empty lines, which was pretty disastrous. As
well as inserting "unsigned", I have removed "short", since memory is plentiful
these days. So line lengths can in principle be *really* big.
2. Change from -lcurses to -lncurses in the Makefile.
3. Insert $(DESTDIR) before all the path names for make install.
Version 2.00 01-Mar-04
----------------------
This version has had the code refactored in several ways, and the compiling
process has been converted into a conventional "configure, make, make install"
paradigm. Only PCRE regular expressions are supported, and the PCRE library has
to be installed. Only Unix-like systems are now supported. The initialization
now uses .nerc instead of an environment variable. A number of other tidies and
minor interface changes were made. The documentation was re-worked to remove
all the obsolete stuff and to incorporate the changes.
To simplify infrastructure.
Ok joerg@
XXX: nios2-gcc3 loops endlessly during build, before and after change,
so untested.
XXX: nios2-gcc does not build on -current, in the same way before
and after the change, so untested.
What's new in pyatspi 2.20.2:
* Update STATE_LAST_DEFINED so that STATE_READ_ONLY is recognized
(bgo#766121).
What's new in pyatspi 2.20.1:
* gettext: Don't modify endOffset (bgo#721860).
Overview of changes in gnome-calculator 3.20.1
* Fix: precedence of root operator (Alexis Poirier and Alberto Ruiz)
* Update: Translation (Translation team)
3.20.2 - May 22, 2016
=====================
* Fix window size growing out of control with GTK+ 3.20
3.20.1 - May 7, 2016
====================
* Updated translations
Contao is an Open Source Content Management Framework developed by Leo Feyer
and distributed under the LGPL license (see GPL.txt and LGPL.txt for more
information). It was formerly known as TYPOlight Open Source CMS.
Its open architecture allows everybody to extend the system to fit his
needs. Contao specializes in accessible websites and is accessbile
itself (front end and back end), rendering valid HTML5 or XHTML pages.
Contao 4.2 is third minor release of Contao 4, which has incompatible API
from Contao 3.
* Now Contao is Symfony bundle.
* Contao 4 dose not use .htaccess files for protexting directory.
* DocumentRoot is "web" subdirecotry.
* XHTML support has gone, HTML5 only.
* Schema.org markup support.
Additionally, these new features.
* Tree view supports filter support.
* File manager support file searching.
* Vimeo video is also supported additinally Youtube.
Updated devel/p5-Gnome2 to 1.046
Updated devel/p5-Search-Elasticsearch to 2.03
Updated devel/p5-MetaCPAN-Client to 1.015000
Updated devel/p5-Log-Dispatch to 2.56
Updated devel/p5-IPC-SysV to 2.07
Updated devel/p5-IO-AIO to 4.34
Updated devel/p5-Hash-Util-FieldHash-Compat to 0.11
---------------------------------------------------
0.11 2016-06-13 21:57:55Z
- be gentle to older toolchains by avoiding the use of
Module::Metadata in configure-requires (RT#115310)
-------------------------------
4.34 Sun May 1 19:18:24 CEST 2016
- def0.h was not properly generated during previous release, causing
compile errors on various platforms.
- major/minor were accidentally switched (reported by Alexander Lishenyuk).
- removed duplicate definition of MAP_HUGETLB, that was found due to
a bug in Perl::Tidy (testcase by alaska332@gmail.com).
- added (untested!) aio_fcntl, aio_ioctl requests.
- (libeio) names set via prctl are truncated to 15 chars + nul, not 16,
as manpages-dev originally claimed.
4.33 Mon Jan 18 12:50:10 CET 2016
- add IO::AIO::pipe2 function.
- added support for FALLOC_FL_COLLAPSE_RANGE and FALLOC_FL_ZERO_RANGE
constants.
- added support for O_TMPFILE and O_PATH constants.
- added support for MAP_FIXED, MAP_GROWSDOWN,MAP_32BIT, MAP_HUGETLB, MAP_STACK
consdtants, whether they can be sensibly used or not.
- use NO_INIT where applicable.
- update libecb.
- added stability canary support.
- updated linux super magic table to 4.3.3.
-------------------------------------
2.56 2016-05-06
- Cleaned up some cruft in Pod. Some sections ended up in there twice.
2.55 2016-05-06
- The values of $@, $!, and $? are protected in various cases where they could
end up being changed by logging code. Patch by Salvador Fandiño. GitHub #18.
- Treat MSYS2 like Cygwin in tests. Fix by Graham Ollis. GitHub #19.
--------------------------------------------
1.015000 02.06.15
* Adding `source` method to MetaCPAN::Client::File (stevan)
1.014000 29.04.15
* Fix warning on missing fields param (Mickey, Sawyer X)
* Switch to Search::Elasticsearch 2.0. (Sawyer X)
* You can test MetaCPAN::API with a different domain using the
environment variable "METACPAN_DOMAIN". (Mickey)
-------------------------------------------------------
2.03 2016-05-24
Added register_qs() to allow plugins to expand known query string params
Added api_version() to API roles so that plugins can determine which
API version they should load.
2.02 2016-04-20
Bug fix:
Sniffed http addresses may or may not have the hostname/ prepended
2.01 2016-04-15
Updated for Elasticsearch 2.3.0
New features:
* Added delete_by_query(), reindex(), and update_by_query()
* Added tasks.list() and tasks.cancel()
* Added ignore_unavailable to cat.snapshots()
* Added attributes and explain to indices.analyze()
* Added verbose to indices.segments()
* S::ES::Error now implements TO_JSON
* TestServer can now be used with forked processes
Bug fixes:
* Search::Elasticsearch::Error shouldn't be a Moo class
* Search::Elasticsearch::Scroll can now be used in a forked process
* Hijk is now optional as it doesn't work on windows
* cat.snapshots requires a repository
--------------------------------
(From https://github.com/GNOME/perl-Gnome2/blob/master/NEWS)
Overview of changes in Gnome2 1.046
===================================
* RT#104191; Don't use localtime() in POD output; patch submitted by intrigeri
for the Debian Reproducable Builds project
- Add following line for make test
BUILD_DEPENDS+= p5-Test-NoWarnings-[0-9]*:../../devel/p5-Test-NoWarnings
(upstream)
- Updated devel/p5-Git-Version-Compare to 1.004
---------------------------------------------
1.004 2016-05-24 BOOK
- Remove a dependency on namespace::clean
- Update the cache using the normalized version string
- Ignore minor versions of special builds (msysgit, windows, etc.)
- Ensure the tests do not throw any warning
- Add a few more version numbers to the tests
1.003 2016-05-03 BOOK
- Added support for version strings with comments (thanks to PINE)
2016.06.17 - nano 2.6.0 "Rubicon" fixes more than fifty little bugs -- and
some of them not so little. It improves moving about in
the file browser, corrects failings of the internal spell
checker, adds a new feature (comment/uncomment lines, with
default binding M-3), makes some error messages clearer,
shows more of a file when positionlog is used and the cursor
is near the end, displays all error messages at startup if
there are multiple ones, does not misinterpret keystrokes
when typing very fast, is less eager to trim the filename
on narrow terminals, speeds up case-insensitive searches,
and allows to abort re-searches. Among bunches of other
things. It is worth the trouble to upgrade.
dose3 (5.0) UNRELEASED; urgency=low
* finally implement keep_package/version/feature properly. The globalid
index that was used to optionally encode the global constraints is
now disappeared. This simplify the interface of the solver.
* massive refactoring. Change of API . All functions in Depsolver*
accept a new paramenter "global_constraints" that is a vpkgformula
enconding all packages that must be co-installed by by default with
each request. This is used to properly encode debian essential packages
without abusing 'Keep_package as before.
* Depsolver_int.{solve,init_solver_unit,init_solver_cache} have a new optional
argument 'explain'. When false, reduce the memory footprint.
* Depsolver.{check_request,check_request_using} accept a new parameter dummy
that can be used to pass arbitrary contraints as a cudf.package that is going
to be coinstalled as part of the request and filtered out in the result.
* improvements to the documentation and test units
* add --compare to ceve when used with pef://
* improvements to distcheck --lowmem
* StdOptions.lastest now returns an integer to consider only the last n versions
of each package
* API change : CudfAdd.latest
* API change : CudfAdd.inttovar -> CudfAdd.inttopkg
* API change : add parameter to check_request and check_request_using
* apt-cudf : package up or downgrades are expressed in a single
"Install" request and that these do not show up as a "Remove" request anymore.
* StdOptions.DistribOptions.add_options are now different for each input ( ex.
StdOptions.DistribOptions.add_debian_options )uu
* Debian.Printer.pp_* functions are now methods of the Debian.package class
-- Pietro Abate <pietro.abate@inria.fr> Thur, 06 Jun 2016 13:13:06 +0200
dose3 (4.3) UNRELEASED; urgency=low
* Fix exitcode problem with apt-cudf
* Add new comparison functions to parse npm like versions
* Make ocamlgraph a hard dependency of dose.
* Switch to ocamlgraph based explanation graphs by default
* add {foregin,native}-architecture field to distcheck output
* bump output-version to 1.2
* add --lowmem option to distcheck (slow, but consumes less memory)
* remove build-essential field from buildcheck
* add --deb-drop-b-d-indep and --deb-profiles to ceve
* API Change. Debian.Debutil.debvpkg is replaced by Pef.Pefcudf.pefvpkg
* API Change. Depsolver_int.solve has a addition argument "explain"
* add new option to ditcheck and ceve --compare to specify a comparison
function to be used with the pef format.
-- Pietro Abate <pietro.abate@inria.fr> Thur, 21 Apr 2016 13:13:06 +0200
dose3 (4.2) UNRELEASED; urgency=low
* Fix META file and other compilation problems (notably on 32 bits architectures)
* Add back the "Enhances" field in the debian printer
* the new yaml format also drops the architecture suffix in the package and
unsat-dependency fields
* Add new function Depsolver.is_consistent and Debian.Debcudf.get_real_name
* Expose Diagnostic.request and Diagnostic.result
* Update the yaml output of outdated (no more cudf-related cruft in package names)
* bump yaml output-version to 1.1
-- Pietro Abate <pietro.abate@pps.univ-paris-diderot.fr> Thur, 14 Jan 2016 13:13:06 +0200
dose3 (4.1) UNRELEASED; urgency=low
* New optimization criteria parser. apt-cudf now accepts only optimization criterias in
misc2012 format.
* the extended MISC 2012 syntax extends the count criteria allowing the
following additional forms:
count(selector,field:=/plain/)
count(selector,field:~/regex/)
* Update Documentation
* Modules are renamed (compiled with -pack) :
Versioning.Debian
Versioning.Semver
* API change : Debian.Debcudf.get_real_version tables now returns
a tuple (name, version) . Name is the original Debian name without
encoding ( "src:" , ":$arch" , "--virtual-" ).
* Implement versioned provides
* strict dependency ocamlgraph >= 1.8.6
* strict dependency extlib >= 1.7.0
* new cudf property for deb/edsp types
native is 1 if the pkg architecture is equal to the native architecture,
0 otherwise. This can be used to maximise the number of packages
belonging to the native architecture ( +sum(solution,active) )
* better parsing and error reporting
* More Module refactoring (algo/deb/pef/opam)
-- Pietro Abate <pietro.abate@pps.univ-paris-diderot.fr> Tue, 01 Dec 2015 13:13:06 +0200
dose3 (4.0) UNRELEASED; urgency=low
* Minor Bugs
* Add opam module
* Major refactoring of parsing functions Pef/Deb/Opam
-- Pietro Abate <pietro.abate@pps.univ-paris-diderot.fr> Mon, 29 June 2015 13:13:06 +0200
dose3 (4.0-rc3) UNRELEASED; urgency=low
* Minor Bugs
-- Pietro Abate <pietro.abate@pps.univ-paris-diderot.fr> Mon, 29 June 2015 13:13:06 +0200
dose3 (4.0-rc2) UNRELEASED; urgency=low
* Add new module Versioning to group all the comparison functions
* Add a new comparison schema (http://semver.org/)
* Add new two new ceve output formats: deb and debsrc
-- Pietro Abate <pietro.abate@pps.univ-paris-diderot.fr> Fri, 26 June 2015 13:13:06 +0200
dose3 (4.0-rc1) UNRELEASED; urgency=low
* Remove dependency to camlp4. Add build dependency to cppo
* Add option --dot to create explanation graphs in dot format
* add 'out-version' field to yaml format
* Debian Essential packages are now kept into account while
generating strong dependencies. You must pass
--deb-ignore-essential to restore the previous behaviour
* Add --latest to challenged
* Add new format PEF : package export format
* Drop eclipse format (superceded by PEF)
* Drop cv format (superceded by PEF)
* Ceve can read source packages
* Add grep-able one line explanations (success/failure) to distcheck
* Switch architecture and name around in cudf representation for debian packages
* Add new function to detect unsused dependencies/conflicts
* API change : Diagnostic.request, Depsolver.request, StdLoaders.load_list,
Debcudf.init_tables,
* add debsrc input format to ceve
-- Pietro Abate <pietro.abate@pps.univ-paris-diderot.fr> Wed, 24 June 2015 13:13:06 +0200
