Brown paper bag release for X.org 7.5, missed one
of the need commits in the cherry picker.
Dave Airlie (2):
Update to xextproto 7.1 support.
ati 6.12.4
It contains numerous fixes to 6.12.2 backported from
master over the last few months, along with PCI IDs
for some new hardware.
Adam Jackson (1):
Fix misleading filenames in DRI setup failure messages
Alex Deucher (42):
R6xx/R7xx: set proper 3D client driver name for r600
radeon: chip family typo
R6xx/R7xx: cleanup macro
radeon: remove old crtc size heuristics
radeon: fix tmds_pll randr property
Revert "DCE3/3.2: cleanup dpms after previous changes"
Remove old messages
Endian fixes for object table
RS690: add quirk for acer board
AVIVO: fix for cursor corruption issue
r2xx/r3xx/r4xx: further i2c fixups
AVIVO: make sure cursor width isn't negative
RV410: SE variants only have 1 quad pipe
AVIVO: fix cursor corruption/flickering issues
R6xx/r7xx: fix CURSOR_SWAPPING_* macros
AVIVO: better fix for cursor flickering/corruption issues
radeon: fix several dpms issues
r2xx-r4xx: fix typo in last i2c fix and clarify hw i2c pin sel
AVIVO: move cusor offscreen when disabling
AVIVO: fix cursor corruption bands for real
AVIVO: set default cursor mode in cursor init
RS690/RS740: fix connector enumeration in some cases
RS690: gpio/connector fixes
R3xx-R5xx: don't set TX_OFFSET_RS in RS_INST_COUNT
r3xx-r5xx: switch to 1/12 subpixel precision
R3xx/R4xx tex vid: increase the guardband limit for rendering with a tri
RV770: add missing pci id
radeon: try harder when checking if a card is posted
r4xx: Add some missing pci ids
Add RV740 (HD4770) support
atom: connector quirk
Add some missing M96 pci ids
RV280: Add an AGP quirk
RV280: another AGP quirk
Add an r420 AGP quirk
radeon: Set PCI/PCIE bus type properly per asic
radeon: fix typo in object header to connector type conversion
radeon: add some new r7xx pci ids
RS880: enable accel
RV280: add agp quirk
RV740: disable small DFS transfers
RV280: add agp quirk
Bryce Harrington (3):
radeon: AGPMode quirk needed for HP Omnibook 6200
radeon: AGPMode quirk needed for IBM Thinkpad T40 with Mobility M7 LW
radeon: AGPMode quirk needed for SiS
Dave Airlie (13):
radeon: fix DDC on rv410 VGA ports for non-atom use.
radeon: tweak ddc fix for all r300s.
radeon: fix r600 shadow fb mode with cursor allocation in wrong place
radeon/tv: fix typo in crtc register modifications
r100/r200: dont emit wrong clamp modes.
atom/tvout: set the correct scaler up for tv out
atombios: store dac detect result into save register.
atom: recall crtc source script after tv dpms on
radeon: move detected monitor type debugging.
r600: fix bad unit in texture setup
ati: update for resources/RAC API removal
ati: change to using ABI version check
ati 6.12.3
Fredrik Höglund (1):
Check if the composite op is supported in R200CheckComposite.
Markus Gapp (1):
Add quirk for asus hd3450 board
Michel Dänzer (2):
Clear the framebuffer before initializing modes.
Pre-R600 EXA: Fix coordinate limits off-by-one error.
Roland Scheidegger (1):
R6xx/R7xx: fix pixel centers
Changes in 6.12.2:
xf86-video-ati 6.12.2 highlights
- - lots of bug fixes
- - r2xx/r3xx textured video improvements from Roland
Alex Deucher (27):
bump version post release
Add new pci ids
R6xx/R7xx EXA: fix maxPitchBytes
DCE3.2: use RMX for for non-native modes on DVI
radeon: add new chip ids
R4xx ATOM: fix crtc routing for CRT1
R6xx/R7xx: clean up bool const code
R6xx/R7xx: clean up logic in EXA Comp PS setup
R6xx/R7xx EXA: rework composite pixel shader
radeon: re-enable r/g/b intensity attributes for overlay
mac mini: fix connector setup regression
r1xx-r3xx TV: fix white noise
Mac mini: fix connector setup for real
mac mini: 3rd time's the charm
COMBIOS: fix default sclk/mclk from bios
COMBIS: Clarify case 0 for LCD DDC table
Unify mc_idle()
Add PCIE register accessors
Add RV790 (HD 4890) support
DCE3/3.2: fix up transmitter/encoder setup
DCE3/3.2: cleanup dpms after previous changes
radeon: fix Xv vsync for multi-head
Fix missing ')' in PCIE macro
Cast info->sclk to int
DCE3/3.2: further fixes
ATOM: code cleanup
Bump for release
Eduard Fuchs (1):
Enable byte swapping for r6xx/r7xx Hardware
Roland Scheidegger (4):
clip fixes
don't convert planar yuv to packed for r300
don't convert planar yuv to packed for r200
fix textured video allocation bug
Changes in 6.12.1:
Fix some fall out from the r6xx/r7xx merge
and fix load detection on avivo chips.
Alex Deucher (9):
Bump post-release
radeon: fix typo in bios scratch reg setup
atom: fix up bios scartch register usage
Fix fallout from r6xx/r7xx EXA merge in IB handling
radeon: add another AGP quirk
AVIVO: Fix dac load detection
R6xx/R7xx AGP: disable gart data transfers
ATOM: fix up tv-out support
bump for release
Fabio (2):
man page updates
man page update
Changes in 6.12.0:
Big changes here are EXA and Xv support for
R6xx/R7xx chips. Requires an updated drm.
Other than that, mostly bug fixes.
Adam Jackson (3):
output: Allow for multiple DisplayPort outputs.
Add some more cases to the DVI single-link checks.
uniphy: start adding DisplayPort setup
Alex Deucher (81):
Initial R6xx/R7xx EXA and textured video support
Allow rotation on r6xx/r7xx
EXA: fix and re-enable Solid() on R7xx
r6xx/r7xx EXA: cleanup overlapping copy
R6xx/R7xx EXA: improve overlapping copy performance
r6xx/r7xx EXA: fix corruption when doing sw access
Revert "R6xx/R7xx EXA: improve overlapping copy performance"
R6xx/R7xx EXA: add accelerated UTS/DFS hooks
Revert "r6xx/r7xx EXA: Optimize overlapping copy"
R6xx/R7xx EXA: fallback on overlapping blits for now
R6xx/R7xx EXA: Fix typo in DFS
R6xx/R7xx Xv: fix typos in cache flushing commands
R6xx/R7xx UTS: move actual upload to separate function
R6xx/R7xx Xv: implement native shader for planar formats
R6xx/R7xx Xv: add accelerated uploads for planar formats
R6xx/R7xx Xv: fix cache flush buffer size for planar
R6xx/R7xx: Add checks to make sure we don't overrun VB space
R6xx/R7xx Xv: Add native support for packed formats
R6xx/R7xx Xv: add support for packed uploads
adjust alignment
R6xx/R7xx: Move engine idle to sync functions
R6xx/R7xx: be more verbose about what function ran out of VB space
R6xx/R7xx: handle running out of vertex buffer space
R6xx/R7xx Xv: switch packed over to Yang's new shader code
Revert "R6xx/R7xx: handle running out of vertex buffer space"
R6xx/R7xx EXA: properly handle non repeat cases in the texture setup
R6xx/R7xx EXA: handle running out of vertex space in the copy path
R6xx/R7xx: switch to drm for wait for idle
R6xx/R7xx EXA: switch to surface sync packet
Bump version post release
R6xx/R7xx: fixup accel paths
R6xx/R7xx: reset 3D state after VT switch
R6xx/R7xx EXA/Xv: properly deal with running out of vertex buffer space
R6xx/R7xx Xv: fix some missing bits from last commit
R6xx/R7xx: wait for MC idle when changing the MC
Fix MC setup on systems with more than 512 MB of VRAM
R6xx/R7xx: fix up a few more paths
radeon: one more 32 -> 64 just to be safe
Don't write new HDP location until we've written the new FB location
RBBM_GUICNTL is pre-r6xx only
R6xx/R7xx: add wait for idle MMIO path
RS600: fix up MC setup
radeon: re-enable load detection output attribute for TV/CV
RS600: fix MC addr mask
R6xx/R7xx EXA: Optimize temp surface for overlapping copies
R6xx/R7xx EXA: init copy_area to NULL
R6xx/R7xx EXA: same surface and same coords equals nop
RS600: enable the DRI by default
R6xx/R7xx: use shadowfb if DRI is disabled
DCE3.2: fix up Save()/Restore()
R300: Add AGP quirk
Print a message when we have a shared DDC line
R6xx/R7xx: switch emit functions to macros
R6xx/R7xx: write vertexes directly to the IB
R6xx/R7xx: code cleanups
R6xx/R7xx Xv: combine packed and planar shaders
R6xx/R7xx EXA: combine composite mask/non-mask VS
R6xx/R7xx EXA: cleanup composite texture setup
R6xx/r7xx: remove some unneeded code I missed in the last commit
Rotation: don't rotate if acceleration is not active
AVIVO: add aspect scaling mode
radeon: adjust LVDS so that default modes get added
Revert "radeon: adjust LVDS so that default modes get added"
radeon: just add some common modes for LVDS
ATOM: don't use fixed ref div for LVDS
RN50: fix up cloning on servers
R6xx/R7xx: disable XV_BICUBIC attribute
R6xx/R7xx: wire up DMAForXv option like older asics
radeon: add a few more default common modes for lvds
AVIVO: fix panning
R6xx/r7xx: clarify EXA message
R4xx: add R4xxATOM option
radeon: clean more thoroughly in RADEONFreeRec()
RS600: fix page table size for rs600 as well
R6xx/r7xx: clarify accel messages
R6xx/R7xx: return in RADEONWaitForIdleMMIO() if accel is off
R6xx/R7xx: fix up vline stuff along the lines of previous chips
R6xx/R7xx: EXA VSync Option not supported yet
radeon: add support for 30 bit LUTs
radeon: man page updates
bump for release
Bryce Harrington (1):
Quirk for RV280 on 82865G/PE/P DRAM Controller/Host-Hub
Christian Koenig (1):
R6xx/R7xx: move shaders to r600_shader.c and fixup Xv PS
Cooper Yuan (1):
radeon: save bios scratch registers in Preinit()
Dave Airlie (3):
r600: enable DRI by default
r600: fix sizing of PCI GART table for r600
r600: reload shaders into VRAM on resume
Mark van Doesburg (1):
R6xx/R7xx EXA: use a temp surface for overlapping copy
Michel Dänzer (6):
Fix compile warning when building without EXA.
Only call RADEONWaitForVLine if it might actually do anything useful.
EXA: Pass pScrn and info into RadeonCompositeTile.
EXA: Adapt to EXA changes in xserver Git.
Revert "EXA: Adapt to EXA changes in xserver Git."
EXA: Make sure Prepare/FinishAccess hooks can handle
EXA_PREPARE_AUX* indices.
Pierre Ossman (2):
Fix bad range adjustment in VLINE code.
Xv vsync support on r6xx/r7xx cards.
Tormod Volden (3):
Janitor: cosmetic clean-up of AGPMode quirk table
M9+: Add AGP quirk for Sony Vaio
RV350: Add AGPMode quirk for Thinkpad
Yang Zhao (5):
r6xx/r7xx EXA: Optimize overlapping copy
R6xx/R7xx EXA: Optimize overlapping copy
R6xx/R7xx Xv: Planar - Properly scale Y'CbCr values before
converting to RGB
R6xx/R7xx EXA: Further optimizations to overlapping copy
R6xx/R7xx shader: Fix OFFSET_[XYZ] macro for TEX_DWORD2 to accept floats
root (2):
atom: Enable DisplayPort source to DVI/HDMI sink
output: Filter out dual-link modes from DP->DVI connections
???(Yu-yeon Oh) (1):
radeon_driver.c small memory bug
xf86-video-ati 6.11.0
Highlights:
- - Lots of bug fixes since 6.10.0
- - Crtc/output/encoder rework
- - Render repeat mode fixes
6.12.0 will be soon to follow with accel support for r6xx/r7xx chips
Alan Coopersmith (2):
Remove xorgconfig & xorgcfg from See Also list in man page
Add README with pointers to mailing list, bugzilla & git repos
Alex Deucher (66):
Fix colors on tv-out
properly handle EnableYUV
Make sure we hit the right bios reg
missed one in last commit
Allow arbitrary tv-out modes
ATOM: rework object table parsing
ATOM: handle cases where TMDS uses linkb
ATOM: Adjust PLL setup for recent atom changes
ATOM: refactor output dpms
ATOM: rework encoder/transmitter setup
Bump version post release
RV280: add another AGP quirk
RV280 Add another AGP quirk
DCE30: LVTMA requires DIG2 encoder
ATOM: combine DAC setup functions
ATOM: switch to define for external tmds
start to re-org outputs
ATOM: round 1 of output rework
First pass at converting legacy code to encoder objects
clean up encoder setup
Fixup encoder setup on pre-ATOM chips
ATOM: more output cleanup
Switch legacy output code to use new encoder objects
ATOM: fix encoder init
fix legacy crtc routing and add some debugging info
More legacy rework
Fix logic cut and paste error
Move active_device setup to detect()
Fix compilation with RADEON_TRACE_FALL set
few more logic pasto's bits I missed
Remove TMDSType, DACType, LVDSType from output rec
track encoder state
Remove some unused cruft
Remove OutputType and other cruft
Additional output cleanup
Fix off by one when printing encoder name
Move legacy output setup functions to legacy_output.c
Warning fixes
ATOM: print useful output info for DPMS events
Fix legacy output setup
Encoders not assigned yet, use supported devices
Move encoder specific data to encoder dev_priv
Return NULL for encoder if no active device is assigned
Fix bad rv710 pci id
Fix encoder accounting
AVIVO: fix rotation
AVIVO: better fix for rotation
Add some missing r6xx/r7xx pci ids
Bump for rc release
RV350: add AGP quirk
ATOM: warning fixes
Bump version post RC release
Radeon EXA: wait for the engine to be idle before sw access
Revert "Radeon EXA: wait for the engine to be idle before sw access"
AVIVO: fix dualhead/rotation for real
R3xx-R5xx EXA: fix texture setup for non-repeat case
R1xx/R2xx EXA: fix non repeat texture setup
RV280: add another agp quirk
RV350: add another AGP quirk
Fix crtc routing on pre-DCE3.2 systems
ATOM: don't unblank uninitialized crtcs
ATOM: reset crtc initialized flag on CloseScreen()
DCE3.2+: allow output cloning
Set default RMX type to FULL on LVDS
R6xx: Connector quirk for asus board
bump for release
Christiaan van Dijk (1):
R3xx/R4xx: Maximize the use of clipped triangles for Xv rendering
Dave Airlie (3):
radeon: r500 PAL timings are slightly incorrect
r500: re-enable TV out
radeon: r500 tv-out force scaler values to nice set that looks correct
David Miller (2):
DRI: Fix page size used in RADEONDRIGetPciAperTableSize().
GART: Save/restore GART table consistently.
Fabio (1):
man page updates
Maciej Cencora (1):
Make sure gb_num_pipes is initialized when DRI is disabled
Michel D=E4nzer (5):
Don't transform EXA Composite mask coordinates when there's no mask.
Drop memcpy fallbacks from EXA UploadToScreen and
DownloadFromScreen hooks.
EXA: Accelerate Composite of RepeatPad/Reflect pictures when possible.
EXA: The source tiling code can't handle RepeatReflect yet.
EXA: If making a pixmap offscreen fails, return ~0ULL as texture offs=
et.
Nicos Gollan (1):
Fixed enumerations in radeon-output.c
Thomas Jaeger (1):
Fall back to software for unsupported repeat modes
Tormod Volden (1):
Add yet another AGP quirk for RV280
Wolke Liu (1):
AVIVO: Save/restore vga pll registers
airlied (1):
rs780: include RS780 in the InitMemory to leave alone
6.10.99.0:
Major changes between 6.10.0:
- - major output rework
- - fix bug in rs780 MC setup that could lead to memory corruption
- - lots of bug fixes
Alan Coopersmith (2):
Remove xorgconfig & xorgcfg from See Also list in man page
Add README with pointers to mailing list, bugzilla & git repos
Alex Deucher (49):
Fix colors on tv-out
properly handle EnableYUV
Make sure we hit the right bios reg
missed one in last commit
Allow arbitrary tv-out modes
ATOM: rework object table parsing
ATOM: handle cases where TMDS uses linkb
ATOM: Adjust PLL setup for recent atom changes
ATOM: refactor output dpms
ATOM: rework encoder/transmitter setup
Bump version post release
RV280: add another AGP quirk
RV280 Add another AGP quirk
DCE30: LVTMA requires DIG2 encoder
ATOM: combine DAC setup functions
ATOM: switch to define for external tmds
start to re-org outputs
ATOM: round 1 of output rework
First pass at converting legacy code to encoder objects
clean up encoder setup
Fixup encoder setup on pre-ATOM chips
ATOM: more output cleanup
Switch legacy output code to use new encoder objects
ATOM: fix encoder init
fix legacy crtc routing and add some debugging info
More legacy rework
Fix logic cut and paste error
Move active_device setup to detect()
Fix compilation with RADEON_TRACE_FALL set
few more logic pasto's bits I missed
Remove TMDSType, DACType, LVDSType from output rec
track encoder state
Remove some unused cruft
Remove OutputType and other cruft
Additional output cleanup
Fix off by one when printing encoder name
Move legacy output setup functions to legacy_output.c
Warning fixes
ATOM: print useful output info for DPMS events
Fix legacy output setup
Encoders not assigned yet, use supported devices
Move encoder specific data to encoder dev_priv
Return NULL for encoder if no active device is assigned
Fix bad rv710 pci id
Fix encoder accounting
AVIVO: fix rotation
AVIVO: better fix for rotation
Add some missing r6xx/r7xx pci ids
Bump for rc release
Christiaan van Dijk (1):
R3xx/R4xx: Maximize the use of clipped triangles for Xv rendering
Dave Airlie (3):
radeon: r500 PAL timings are slightly incorrect
r500: re-enable TV out
radeon: r500 tv-out force scaler values to nice set that looks correct
Maciej Cencora (1):
Make sure gb_num_pipes is initialized when DRI is disabled
Michel D=E4nzer (3):
Don't transform EXA Composite mask coordinates when there's no mask.
Drop memcpy fallbacks from EXA UploadToScreen and
DownloadFromScreen hooks.
EXA: Accelerate Composite of RepeatPad/Reflect pictures when possible.
Nicos Gollan (1):
Fixed enumerations in radeon-output.c
Thomas Jaeger (1):
Fall back to software for unsupported repeat modes
Tormod Volden (1):
Add yet another AGP quirk for RV280
Wolke Liu (1):
AVIVO: Save/restore vga pll registers
airlied (1):
rs780: include RS780 in the InitMemory to leave alone
xf86-video-ati 6.10.0
Major changes:
- - Bicubic scaling on r3xx/r4xx/r5xx/rs690
- - Support for new asics
- - reduced tearing with Xv
- - lots of bug fixes
Adam Jackson (2):
Fix connector table mapping for lvtma/kaleidoscope/uniphy.
Fix HDMI output setup on DIG1/DIG2.
Adrian Friedli (1):
Add another AGP quirk
Alex Deucher (91):
Revert "IGP: attempt to fix VGA on IGP chips"
RADEON: IGP VGA fixes take 2
RS4xx: enable the DRI by default on all variants
Revert "rotate: fix rotation in conf file."
Add quirk for Falcon NW laptop
Fix cursor with multi-head and rotation
Make sure cursor offsets are properly aligned when using EXA
R300: NUM_FPU adjustments for VAP_CNTL
ATOM: Add support for UpdateCRTC_DoubleBufferRegisters cmd table
ATOM: fix for r4xx cards with no VRAM_Usage tables
Add oem quirk for external tmds setup on Dell Inspiron 8600
Clean up legacy display watermark setup
Clear display priority bits before resetting them
Interlaced mode fixups for AVIVO chips
First pass at InitDispBandwidth() for AVIVO chips
Add quirk for oem x300 card
Fix error in driver connector table for powerbook w/ vga
Change prim types for exa and textured video to help avoid tearing
IGP: Updated quirk handling
IGP: attempt to get external TMDS working
IGP: fix typo in IGP quirk handling
Remove un-needed dac check for single crtc cards
RS4xx: Fix up ddc gpio
RS4xx DDC fixes take 3
Fix VT switching on M6 chips
Further cleanup and unification of i2c code
Remove reset of 3D scissor registers when using the CP in the ddx
PLL adjustments
Whitespace cleanup from bucubic merge
Additional cleanups and re-arragement following bicubic merge
match textured video macro names with other accel code
Move CP into a separate struct
Move accel state to a separate struct
Move DRI to a separate struct
Switch to using radeon_drm.h from the drm
Convert randr, Xv to a common allocator
Bicubic fixes from the last cherry-pick
Switch cursors over to generic allocator
Switch EXA path back to static cursor allocation
fix some fallout from the common allocator
radeon: Add quirk for macbook
Fix copy/paste error in the last commit
more macbook fixes
cleanup macbook quirk
radeon: Further pll adjustments
atombios updates from upstream
Workaround to make initial rotation work
proper fix for initial rotation
man page updates
Add support for DDC via atom commands for RV410
Refactor atom LCD/DFP output setup
Turn coherent mode off by default on DVI
set grey levels correctly for temporal dithering
Fixups from last DFP/LCD refactor
Fix grey level dithering setup
Add LCD dithering quirk for macbook pro
Check for LVDS on all IGP chips
Don't support rotation is accel is not available
Get hardcoded edid from the bios for servers that support it
Fix up posted logic
radeon: fixup shared DDC lines for some rv610 cards.
Add quirk for r200 card with the primary dac wired to both ports
move 3d state init after RADEON_SWITCH_TO_3D()
Only flush IB when direct rendering is enabled
Make sure 3D state is emited when switching to 3D IB
Fix up US setup after r3xx bicubic merge
First pass at tear-free accel
Make VSync for EXA and Xv configurable
set coherent mode consistently (enabled for now)
R200: Remove scissor setup from init3d()
Add missing .TP in man page
Add randr 1.3 panning support
Add another AGP quirk
Add support for Apple eMacs
Remove mention of MergedFB from server log
Remove remnants of unused DDCMode option
R3xx-R5xx: switch back to quad rendering for Xv
R2xx: switch EXA composite to rects rather quads
Pre-avivo: fix FP setup
R3xx-R5xx: better fix for xv primitive tearing issues
R2xx EXA: limit composite to 2047 like r1xx
Make sure to include radeon_drm.h in the tarball
Revert "radeon: maybe special handling only needed for DVI port
not HDMI one."
RS600: remove gpio quirk for ddc
R2xx: add another AGP quirk
Another AGP quirk
AGP: Print both device and subsytem pci ids for agp
ATOM: fail on more tables with unhandled revisions
ATOM: add format rev 2 for digitial command tables
R100: Fix typo in e55598cc1b35d398c9eb2c3946df71456775f621
Bump version for release
Benjamin Close (1):
xf86misc extension has been removed, update driver to reflect it
Benjamin Herrenschmidt (3):
atombios: add support for other endians.
Fix console switch on R500
radeon: Fix PCI usage of 32-bit driver on 64-bit platform
Brice Goglin (2):
use PACKAGE_VERSION_* for radeon version
Increase default GART size to 32MB on >=3DR300
Bryce Harrington (4):
radeon: Fix pasto in connector table setup for vga powerbooks
Add AGP quirk table
Additional AGP quirks
Add another AGP quirk
Calvin Fong (1):
IGP: add support for NTSC tv-out on legacy IGP chips
Corbin Simpson (21):
Add bicubic texture table, as well as the script used to
(re)generate it. To regenerate, just run "python bicubic_table.py >
bicubic_table.h".
Fixed typos in the bicubic texture tables. Whoops, looks like
I'm still asleep.
Allocate memory for the bicubic filter texture.
Upload bicubic filter to card. This was a LOT easier than I had
feared, to be honest.
Upload pixel shader to card for r5xx. This was ridiculous. Also
it doesn't work yet...
Try to get tex coords from the VAP to RS properly when bicubic
filtering is enabled.
Make vertices emit properly.
More bicubic FP buggies.
Finally got the fragment program fully working for bicubic
filtering on r5xx.
Fix constants.
Merge upstream changes to vertices, and also add Xv attributes
for textured video, including bicubic filtering.
Oops, made a mistake with vertices.
Bump bicubic cutoff to R580.
Force R580-only for bicubic.
Update bicubic tables.
Enable bicubic filtering for all r5xx HW.
Change floats to uint32_t hex.
Switch from 32-bit floats to 16-bit half-floats.
Switch to Mesa-style 24-bit float packing.
r3xx: Various Xv fixes.
Fix indentation on IS_R300_3D Xv code.
Dave Airlie (45):
radeon: drop all use of CPMode.
rotate: fix rotation in conf file.
rv770 initial support
pciid: add radeon HD3850.
atombios: use macro to get offset into table
atombios: fix typo in mode conversion for panel
radeon: make r600 use i2c table lookup for ddc.
radeon: add 0x9441 for hd 4870 x2
radeon: fix powerpc build
radeon: rename radeon_memory to radeon_legacy_memory.
radeon: hopefully fix plls for 30" monitors.
atombios: set missing pixel clock
atombios: oops typo
pciid: add HD3300 - 790GX chipset.
radeon: always align dstPitch to 64 bytes for textured video
r100/r200: EXA misrenders dst =3D=3D a8 + dst alpha use.
radeon_drm.h: remove kernel defines
radeon: fix HDMI having DACs in some BIOSes
Stability fixes from radeon-gem-cs
Don't mix 2D and 3D in the same IB
radeon: apply atom quirks to object table
radeon: damn you bios, HDMI cannot have DACs.
radeon: memset the pll setting function
r600: don't idle engine
radeon: fixes from Alex for some output engines
DCE32: add support for DCE3.2 digital outputs.
radeon: add initial rv730 pciids.
atombios: fix issue with Clearing of MM_INDEX 0.
atombios: correct fix for previous issue.
atombios: fixup parsing of TV tables on r500 and r600 cards.
atom/tv: fixup the tv out default if bios doesn't specify
atom/tv: enable scaler can set the TV output scaler up.
atom: spc3 only requires ucEncoderMode for DIG outputs
radeon: use latest atombios constants for TV encoders in set_crtc_sou=
rce
atom/r600: re-enable TV outputs
atombios: re-enable TV dpms
radeon: tv timings have crev/frev wrong way around for some reason.
radeon: add all new pci ids for rv730/rv710 families
radeon: setup 3D engine even when no DRI.
atombios/tv: add an option to enable atom tv-out for users.
radeon: pass distcheck
radeon: update to 6.9.0.91
radeon: a-bit motherboard has no DVI output
radeon: maybe special handling only needed for DVI port not HDMI one.
atombios: endian fix in r600 object table handling
Dennis Kasprzyk (12):
Fix texture size, texture filter, vertex offsets, etc.
Set helper texture filter correctly.
Implement LPR in one instruction.
Remove uneeded negations.
Heavy optimizations.
Remove one constant.
Smarter usage of the texture semaphore.
Another uneeded SEM_AQUIRE.
Move some ALU instructions after the TEX instructions, so we can
do something usefull while we are waiting for the texture values.
Fixed bicubic fragment program comments.
Fix bicubic fp calculation.
Fix typos.
Egbert Eich (1):
Cleanups from rhd port
Eygene Ryabinkin (1):
Catch unsubstituted macro for PCI region base access
Fabio (4):
Fix formatting in man page
Remove duplicate ATI in some device names
man page updates
man page updates
Joseph Adams (1):
Add more eMac modes, fix crash in last patch
Julien Cristau (2):
Link with -lpciaccess and -ldrm if needed
Bug#7148: Fix manpage formatting
Maciej Cencora (3):
Add needed FP registers, etc. for r3xx bicubic Xv.
Add r3xx-specific bicubic filtering code. FP, RS, mostly,
everything else is shared with r5xx.
Enable bicubic Xv on r3xx+. Still some buggies in the actual
display, but looks pretty good.
Michel D=E4nzer (7):
Restore versioning of interface for Mesa DRI driver.
Only declare local variable when it's used.
Call DRM modeset ioctl after the IRQ has been initialized.
Make sure video offerlay offsets don't exceed the hardware limit
of 128 MB.
Fix -Werror build.
Update GEN_INT_CNTL register value after calling DRM modeset ioctl.
Pass base offset into RADEONDisplayVideo() explicitly.
Owain Gordon Ainsworth (1):
radeon: don't call ioctl unless DRI is initialised
Patrick Haller (1):
Fix off by one in EXA composite limit checking
Pierre Ossman (10):
Fix comments for R500 fragment shader to reflect the code.
Fix node setup on R300 bicubic pixel shader. It was backwards and used
Fix macros so that they are safe to use with expressions as parameter=
s.
Now that we have a bicubic code path that messes up the pixel shader,
Make the R300 bicubic shader program a bit easier to understand by
Change the XV_BICUBIC attribute to a tristate, where the third state
Switch r200 Xv to use rect lists rather than quads to avoid tearing
Improve tearing avoidance for Xvideo in two steps
Optimise RADEONWaitForVLine
Fix scissor setup for Xv
Ramon van der Stelt (1):
Interlaced mode fixes
Roland Scheidegger (1):
clamp tex coords (r100/r200) for textured video
Wolke Liu (1):
Add pci id for FireMV 2400
6.9.0.91:
Pre-release notes:
This contains a lot of bugfixes/enhancements, highlights include
Output support for all radeon chips from r100 to rv730 (mergedfb accel for all r600 and newer)
- rv710/730 DCE3.2 support
- Initial eMac support
- better HDMI support
Enhanced textured video support
- Bicubic shaders
- Large triangle rendering to decrease tearing
- vsynced Xv
Interlaced mode support
Lots of EXA correctness and stability fixes
Big-endian atombios support.
Initial ATOM tv-out support. This is disabled by default currently,
(please use the Option "ATOMTvOut" "TRUE" option in xorg.conf to test).
Regards,
Dave.
Adam Jackson (2):
Fix connector table mapping for lvtma/kaleidoscope/uniphy.
Fix HDMI output setup on DIG1/DIG2.
Adrian Friedli (1):
Add another AGP quirk
Alex Deucher (80):
Revert "IGP: attempt to fix VGA on IGP chips"
RADEON: IGP VGA fixes take 2
RS4xx: enable the DRI by default on all variants
Revert "rotate: fix rotation in conf file."
Add quirk for Falcon NW laptop
Fix cursor with multi-head and rotation
Make sure cursor offsets are properly aligned when using EXA
R300: NUM_FPU adjustments for VAP_CNTL
ATOM: Add support for UpdateCRTC_DoubleBufferRegisters cmd table
ATOM: fix for r4xx cards with no VRAM_Usage tables
Add oem quirk for external tmds setup on Dell Inspiron 8600
Clean up legacy display watermark setup
Clear display priority bits before resetting them
Interlaced mode fixups for AVIVO chips
First pass at InitDispBandwidth() for AVIVO chips
Add quirk for oem x300 card
Fix error in driver connector table for powerbook w/ vga
Change prim types for exa and textured video to help avoid tearing
IGP: Updated quirk handling
IGP: attempt to get external TMDS working
IGP: fix typo in IGP quirk handling
Remove un-needed dac check for single crtc cards
RS4xx: Fix up ddc gpio
RS4xx DDC fixes take 3
Fix VT switching on M6 chips
Further cleanup and unification of i2c code
Remove reset of 3D scissor registers when using the CP in the ddx
PLL adjustments
Whitespace cleanup from bucubic merge
Additional cleanups and re-arragement following bicubic merge
match textured video macro names with other accel code
Move CP into a separate struct
Move accel state to a separate struct
Move DRI to a separate struct
Switch to using radeon_drm.h from the drm
Convert randr, Xv to a common allocator
Bicubic fixes from the last cherry-pick
Switch cursors over to generic allocator
Switch EXA path back to static cursor allocation
fix some fallout from the common allocator
radeon: Add quirk for macbook
Fix copy/paste error in the last commit
more macbook fixes
cleanup macbook quirk
radeon: Further pll adjustments
atombios updates from upstream
Workaround to make initial rotation work
proper fix for initial rotation
man page updates
Add support for DDC via atom commands for RV410
Refactor atom LCD/DFP output setup
Turn coherent mode off by default on DVI
set grey levels correctly for temporal dithering
Fixups from last DFP/LCD refactor
Fix grey level dithering setup
Add LCD dithering quirk for macbook pro
Check for LVDS on all IGP chips
Don't support rotation is accel is not available
Get hardcoded edid from the bios for servers that support it
Fix up posted logic
radeon: fixup shared DDC lines for some rv610 cards.
Add quirk for r200 card with the primary dac wired to both ports
move 3d state init after RADEON_SWITCH_TO_3D()
Only flush IB when direct rendering is enabled
Make sure 3D state is emited when switching to 3D IB
Fix up US setup after r3xx bicubic merge
First pass at tear-free accel
Make VSync for EXA and Xv configurable
set coherent mode consistently (enabled for now)
R200: Remove scissor setup from init3d()
Add missing .TP in man page
Add randr 1.3 panning support
Add another AGP quirk
Add support for Apple eMacs
Remove mention of MergedFB from server log
Remove remnants of unused DDCMode option
R3xx-R5xx: switch back to quad rendering for Xv
R2xx: switch EXA composite to rects rather quads
Pre-avivo: fix FP setup
R3xx-R5xx: better fix for xv primitive tearing issues
Benjamin Close (1):
xf86misc extension has been removed, update driver to reflect it
Benjamin Herrenschmidt (3):
atombios: add support for other endians.
Fix console switch on R500
radeon: Fix PCI usage of 32-bit driver on 64-bit platform
Brice Goglin (2):
use PACKAGE_VERSION_* for radeon version
Increase default GART size to 32MB on >=R300
Bryce Harrington (4):
radeon: Fix pasto in connector table setup for vga powerbooks
Add AGP quirk table
Additional AGP quirks
Add another AGP quirk
Calvin Fong (1):
IGP: add support for NTSC tv-out on legacy IGP chips
Corbin Simpson (21):
Add bicubic texture table, as well as the script used to (re)generate it. To regenerate, just run "python bicubic_table.py > bicubic_table.h".
Fixed typos in the bicubic texture tables. Whoops, looks like I'm still asleep.
Allocate memory for the bicubic filter texture.
Upload bicubic filter to card. This was a LOT easier than I had feared, to be honest.
Upload pixel shader to card for r5xx. This was ridiculous. Also it doesn't work yet...
Try to get tex coords from the VAP to RS properly when bicubic filtering is enabled.
Make vertices emit properly.
More bicubic FP buggies.
Finally got the fragment program fully working for bicubic filtering on r5xx.
Fix constants.
Merge upstream changes to vertices, and also add Xv attributes for textured video, including bicubic filtering.
Oops, made a mistake with vertices.
Bump bicubic cutoff to R580.
Force R580-only for bicubic.
Update bicubic tables.
Enable bicubic filtering for all r5xx HW.
Change floats to uint32_t hex.
Switch from 32-bit floats to 16-bit half-floats.
Switch to Mesa-style 24-bit float packing.
r3xx: Various Xv fixes.
Fix indentation on IS_R300_3D Xv code.
Dave Airlie (42):
radeon: drop all use of CPMode.
rotate: fix rotation in conf file.
rv770 initial support
pciid: add radeon HD3850.
atombios: use macro to get offset into table
atombios: fix typo in mode conversion for panel
radeon: make r600 use i2c table lookup for ddc.
radeon: add 0x9441 for hd 4870 x2
radeon: fix powerpc build
radeon: rename radeon_memory to radeon_legacy_memory.
radeon: hopefully fix plls for 30" monitors.
atombios: set missing pixel clock
atombios: oops typo
pciid: add HD3300 - 790GX chipset.
radeon: always align dstPitch to 64 bytes for textured video
r100/r200: EXA misrenders dst == a8 + dst alpha use.
radeon_drm.h: remove kernel defines
radeon: fix HDMI having DACs in some BIOSes
Stability fixes from radeon-gem-cs
Don't mix 2D and 3D in the same IB
radeon: apply atom quirks to object table
radeon: damn you bios, HDMI cannot have DACs.
radeon: memset the pll setting function
r600: don't idle engine
radeon: fixes from Alex for some output engines
DCE32: add support for DCE3.2 digital outputs.
radeon: add initial rv730 pciids.
atombios: fix issue with Clearing of MM_INDEX 0.
atombios: correct fix for previous issue.
atombios: fixup parsing of TV tables on r500 and r600 cards.
atom/tv: fixup the tv out default if bios doesn't specify
atom/tv: enable scaler can set the TV output scaler up.
atom: spc3 only requires ucEncoderMode for DIG outputs
radeon: use latest atombios constants for TV encoders in set_crtc_source
atom/r600: re-enable TV outputs
atombios: re-enable TV dpms
radeon: tv timings have crev/frev wrong way around for some reason.
radeon: add all new pci ids for rv730/rv710 families
radeon: setup 3D engine even when no DRI.
atombios/tv: add an option to enable atom tv-out for users.
radeon: pass distcheck
radeon: update to 6.9.0.91
Dennis Kasprzyk (12):
Fix texture size, texture filter, vertex offsets, etc.
Set helper texture filter correctly.
Implement LPR in one instruction.
Remove uneeded negations.
Heavy optimizations.
Remove one constant.
Smarter usage of the texture semaphore.
Another uneeded SEM_AQUIRE.
Move some ALU instructions after the TEX instructions, so we can do something usefull while we are waiting for the texture values.
Fixed bicubic fragment program comments.
Fix bicubic fp calculation.
Fix typos.
Egbert Eich (1):
Cleanups from rhd port
Eygene Ryabinkin (1):
Catch unsubstituted macro for PCI region base access
Fabio (3):
Fix formatting in man page
Remove duplicate ATI in some device names
man page updates
Joseph Adams (1):
Add more eMac modes, fix crash in last patch
Julien Cristau (2):
Link with -lpciaccess and -ldrm if needed
Bug#7148: Fix manpage formatting
Maciej Cencora (3):
Add needed FP registers, etc. for r3xx bicubic Xv.
Add r3xx-specific bicubic filtering code. FP, RS, mostly, everything else is shared with r5xx.
Enable bicubic Xv on r3xx+. Still some buggies in the actual display, but looks pretty good.
Michel Dänzer (7):
Restore versioning of interface for Mesa DRI driver.
Only declare local variable when it's used.
Call DRM modeset ioctl after the IRQ has been initialized.
Make sure video offerlay offsets don't exceed the hardware limit of 128 MB.
Fix -Werror build.
Update GEN_INT_CNTL register value after calling DRM modeset ioctl.
Pass base offset into RADEONDisplayVideo() explicitly.
Owain Gordon Ainsworth (1):
radeon: don't call ioctl unless DRI is initialised
Patrick Haller (1):
Fix off by one in EXA composite limit checking
Pierre Ossman (10):
Fix comments for R500 fragment shader to reflect the code.
Fix node setup on R300 bicubic pixel shader. It was backwards and used
Fix macros so that they are safe to use with expressions as parameters.
Now that we have a bicubic code path that messes up the pixel shader,
Make the R300 bicubic shader program a bit easier to understand by
Change the XV_BICUBIC attribute to a tristate, where the third state
Switch r200 Xv to use rect lists rather than quads to avoid tearing
Improve tearing avoidance for Xvideo in two steps
Optimise RADEONWaitForVLine
Fix scissor setup for Xv
Ramon van der Stelt (1):
Interlaced mode fixes
Roland Scheidegger (1):
clamp tex coords (r100/r200) for textured video
Wolke Liu (1):
Add pci id for FireMV 2400
NB: This package no longer supports Mach64 or Rage128 chips.
Please see the separate xf86-video-mach64 and xf86-video-r128 packages.
6.9.0:
In addition to lots of bug fixes there are several major new features:
- Improved EXA render support for r1xx/r2xx cards
- EXA render support for r3xx/r4xx/r5xx cards
- Textured video support for Xv (r1xx-r5xx)
6.8.0:
- mach64, r128, radeon ported to libpciaccess
- massive restructuring of ati wrapper
- radeon support for r5xx, rs6xx, and r6xx chips using ATOMBIOS
- return of zaphod mode support
- radeon support for centered modes using scalers (selectable via
output attributes)
- PAL tv-out fixed on supported chips
- initial support for render accel on r3xx/r4xx chips (rotation)
- fix TV option handling
- Xv RGB fixes
- XPRESS Xv fixes
- improve bios/driver interaction on radeon
- revert back to previous AGP mode behavior
- lots of bug fixes
from the version in xsrc which in turn was provided by Matthieu Herb
over 3 years ago on the XFree86 lists. Suggested by various developers,
hold-back due to the working state in xorg-server 1.1.1. Tracing down
the exact change showed that the changed default color depth made this
issue a lot more prominent again. Discussed with Eric Anholt.
Bump revision.
snj
hasso
joerg
wiz
bjs
tnn
rillig
reed