These should be explicitly set in the scripts, otherwise, the
pkgtasks defaults are used by locating programs in the $PATH
or are hardcoded defaults used for testing pkgtasks.
For target files listed in CONF_FILES (and other config file
variables), assert that the containing directories are named in
MAKE_DIRS or one of the other directory variables.
Change the assertion into an install-time check that the paths
listed in INSTALLATION_DIRS are relative paths or are in ${PREFIX}.
This delays the check so that some common variables used when
listing directories in INSTALLATION_DIRS are fully-expanded.
This appears to be causing issues with pkgsrc GCC attempting to insert
builtins it does not have, because we don't build libssp. unbreaks icu build.
there may be more problems from this issue in the future, but netbsd-7 is
better tested now.
Add an assertion that all paths listed in INSTALLATION_DIRS must
either begin with ${PREFIX}/ or are relative paths. Clarify in the
documentation that INSTALLATION_DIRS can list either type of path.
Some packages are using INSTALLATION_DIRS to create directory trees
outside of ${PREFIX}, e.g., under ${PKG_SYSCONFBASE} or ${VARBASE}.
However, these directories are only created as part of the
"install" target, which causes them to only be created during the
staged installation into ${DESTDIR} and not at all if their binary
packages are installed. These packages should be fixed to use
MAKE_DIRS or OWN_DIRS to create these directory trees at the proper
time.
creates or updates the checksum. Allows users to set FAILOVER_FETCH in
mk.conf unconditionally and be able to update distinfo files without
first having to remove them.
This is only actually in use where known supported.
Prepared for a while, also the default in the base system (for NetBSD and
numerous others), introduced on mailing-lists and in my talk "Hardening
pkgsrc", and finally accepted unanimously during pkgsrcCon 2017.
Used by Joyent already (according to jperkin@) and tested in EdgeBSD for a
couple years now (amd64 and i386).
This is only performed if PKG_DEVELOPER and RELRO are in use.
After a suggestion during my talk at BSDCan 2017; thanks!
Also, submitted on tech-pkg@ for review mid-June.
As a next step, it seems this can be extended to libraries, just like the
check for SHLIBS does (from which this is inspired).
Reference the notion of making compilers visible to the build
environment. Mention setting --std flags. Note that the text is
currently aspirtational relative to gcc and C++.
(Comment change only.)
ccache needs to call real compiler and it detects it with looking in $PATH.
In case of usage of /usr/local/bin/clang as the desired pkgsrc $CC option,
it will be shadowed by /usr/pkg/bin/clang if someone will build it in as a
package. Workaround the problem with setting CCACHE_PATH through
PKGSRC_MAKE_ENV. Little bit overzelaously set it to
${CCPATH:H}:${CXXPATH:H}:${CPPATH:H}, just in case that they might be in
different paths. To ensure that they are not shadowed in narrow cases,
there is an option to rename clang to xclang or similar and use it this
way in $PKG_CC.
While there, introduce new user settable option: CCACHE_LOGFILE.
If set, ccache logs to file specified in ${CCACHE_LOGFILE:Q}.
+# CCACHE_LOGFILE
+# If set to a file path, ccache will write information on what it is
+# doing to the specified file. This is useful for tracking down
+# problems.
This fixes another set of problems building large projects like Clang, LLVM
with ccache.
Sponsored by <The NetBSD Foundation>
Introduce Icon Theme cache handling framework
Icon Theme cache files are used by GTK+ and maintained with the
gtk-update-icon-cache tool. Each Icon Theme package duplicates
its own maintainance scripts: only the specified icon theme directory
differs. With this framework, if packages have ICON_THEMES=yes,
associated icon themes will be detected and their cache files will
be maintained automatically.
Change cache handling behaviour as follows:
* Icon theme caches will be updated if either gtk2+ or gtk3+
gtk-update-icon-cache tool is available.
* With installation of gtk2+ package, not only hicolor icon theme but
also any other icon theme cache files will be updated.
* Prevent removal of icon caches at deinstall, gtk3+ may be installed and
using them.
* Ditto with gtk3+, gtk2+ may not be installed now, so caches must be
maintained by gtk3+.
there are further issues with circular dependencies which need to be resolved
before the change to using find from coreutils can be made.
Revert previous change for now.
The ccache.mk file was checking for languages "c" and "c++".
New framework for C++ dialects (or revisions) was setting implicitly c++,
translating e.g. c++11 to c++.
compiler.mk set this c++ after including ccache.mk, so c++ was undefined
and ccache was ignored.
This helps to build large projects like LLVM+Clang+LLDB with ccache.
Sponsored by <The NetBSD Foundation>
@TYPE1INST@ should be replaced with ${TOOLS_PATH.type1inst}.
Before this change, the sed(1) script being generated was not
replaced @TYPE1INST@ at all, and instead generating a no-op
substitution pattern for TTMKFDIR.
LDCONFIG_ADD_CMD and LDCONFIG_REMOVE_CMD are set by emulator/*.mk
in order to update the library search paths in the emulated system
directories. Substitute for those values, but default them to the
empty string so that the default action taken by the "shlibs" task
can be used.
${CROSSBASE} and ${VARBASE} both point to important directories
for installed packages, so always substitute those values into
deinstall/install scripts.
The header template loads pkgtasks' load.subr unconditionally, so
if any script templates are used, then they imply a dependency on
pkgtasks. Trigger the dependency in the "pkgtasks" framework by
setting USE_PKGTASKS to "yes".
Add missing feature from "pkginstall" framework where the config
directory ${PKG_SYSCONFDIR} was automatically created if one of
the following conditions were true:
* PKG_SYSCONFSUBDIR was defined and non-empty.
* Any configuration files were copied into ${PKG_SYSCONFDIR}.
The platform/${OPSYS}.mk files now use platform-specific code to
set ${_OPSYS_SHLIB_TYPE} which is the default value for
${SHLIB_TYPE}. All previous uses of this script to detect the
native shared library type or native executable format have been
removed from pkgsrc.
If ${_USE_NEW_PKGINSTALL} is "yes", then use the new "pkgtasks",
"init", and "pkgformat/pkg"-scripts frameworks instead of the
existing "pkginstall" framework.
Move the files needed to generate +DEINSTALL and +INSTALL scripts
for the "pkg" format into pkgsrc/mk/pkgformat/pkg.
Create new script templates that make use of "pkgtasks" to perform
the actual tasks.
${INIT_SYSTEM} is used to select the type of init system in use on
the system, and currently can be either "rc.d" for the NetBSD rc.d
system, or "smf" for the Solaris Service Management Facility
system.
pkgsrc/mk/init/smf.mk is pkgsrc/mk/smf.mk with some very minor
modifications to fit into the "init" framework.
A full dependency on the "pkgtasks" package will be added if a
non-empty data file is generated by the framework.
This framework is not yet hooked into bsd.pkg.mk, pending some
other changes.
Assert MAKE_DIRS_PERMS and OWN_DIRS_PERMS have the right number of
words before using a multivariable .for loop over those variables.
This prevents errors in parsing the makefiles.
Only four platforms, all BSDs, need to resolve "ELF/a.out" into
either ELF or a.out. Calculate it directly in the platform file
and return the value in ${_OPSYS_SHLIB_TYPE} and export that value
in bsd.prefs.mk as ${SHLIB_TYPE}.
Instead of requiring the file(1) tool, we can expect the base
system of those BSDs to have /usr/bin/file, so make use of it
directly.
while ago, but since then any packages that included both curses and
terminfo ended up with conflicting BUILDLINK_TRANSFORM entries, leaving it
to include ordering to determine whether the builtin or pkgsrc curses was
used. This keeps them in sync, at least by default, though ideally we'd
ensure that at an infrastructure level.
the exec option up until version 9 (Leopard). sysutils/findutils should be used on
prior releases.
This resolves packaging Python modules which utilise lang/python/egg.mk. find(1)
is called here with '{}' +; passed to exec option.
This allows packages to specify the version of the standard that they
require, and the infrastructure then distils that down in a similar way
to GCC_REQD to the newest standard, avoiding clashes with different -std
requirements based on CXXFLAGS.
Broad concensus on tech-pkg and tested in bulk builds.
than on all of the rpaths. We can't always exclude the rpath being added,
for example when the compiler adds its own behind our back, so this avoids
false positives.
The new options are, for FORTIFY:
"no" Do not pass any flags for FORTIFY
"weak" Pass -D_FORTIFY_SOURCE=1
"strong" Pass -D_FORTIFY_SOURCE=2
This allows users to reduce the level of FORTIFY specified if necessary
or desired. The previous setting as "yes" is now equivalent to "strong"
(the default when enabling).
The new options are, for RELRO:
"no" Do not pass any flags for RELRO
"partial" Pass -Wl,-z,relro
"full" Pass -Wl,-z,relro -Wl,-z,now
This allows users to reduce the level of RELRO specified if necessary or
desired. The previous setting as "yes" is now equivalent to "full" (the
default when enabling).
This is intended to match the changes committed by jperkin@ (for SSP)
after our discussion a (long) while back.
No functional change intended (with the settings supported so far).
Changes since 2.4.2 are too numerous to mention, with over 4,700 lines
in the ChangeLog file. However, this release does at least fix a large
number of build failures on SmartOS, and doesn't appear to cause any
obvious regressions in bulk builds performed by Joerg and myself.
Some pkgsrc cleanups while here, including merging the MirBSD patches
correctly. It couldn't be made much clearer how to properly integrate
patches here to ensure they are not lost. Next time you might not be so
fortunate!
When necessary, the flex version is obtained from the version string reported
by running flex. Generally, the first word of the version string is flex and
and the second is a version number. At least for MacOS, there is a third
vendor-specific word. The sed command previously used to capture the flex
version captured the last word, not the second one, because the first capture
group was too greedy and could capture more than a single word. Instead,
force the capture groups to capture only words, i.e., no blanks, and use the
second word for the version.
of this feature has exploded over recent years, this avoids quadratic
complexity for many packages during scan and build phase of a bulk
build. Pbulk logic for exploiting this feature will be committed
separately. Over all, this saves ~66% for wm/xfce4-wm
with initially empty cache and ~90% when the cache is populated. Total
scan time can be cut in half.
- remove three defunct mirrors
- remove xemacs.org - its hoster tux.org went down,
and the master site as well as all the *.xemacs.org
DNS entries are gone
- add two mirrors that run under their own domain name
