0.74
- Several small game specific fixes/hacks/support. (Offensive,
Roadhog, GTA installer, Kingdom O' Magic soundcard detection,
Pirate booter, Armored Fist installer)
- Add the S3-specific 640x480 256 color mode. (fixes regression in "Wooden
Ships and Iron Men" and "I Have No Mouth And I Must Scream")
- Fix a stack overflow that could crash DOSBox.
- Add fake microphone input. (fixes Talking Parrot)
- Modify adlib turn off code, so that it doesn't turn off in
cases where the same sound is repeated over and over again.
- Several small fixes to the CDROM audio code. (HOMM2, Redneck
Rampage and others)
- Several improvements to the CDROM emulation code. (fixes Alpha
Storm and GT Racing 97)
- Some small CPU fixes that might fix something.
- Handle opcode 0xff subcode 7 as invalid instruction. (fixes dif-2 & others)
- Some hercules fixes. (Testdrive)
- Improve support for blanked parts that wrap around to the start of
the screen. (fixes Magic Circle demo and Sid&Al)
- Remove old OPL cores as the new ones seem to work very nicely.
- Modify movie recording code so that the movies aren't corrupt when
you exit dosbox without stopping the movie.
- Change RGB3x scaler to look more pretty.
- Improve initial register values compatility of the GUS.
- Added autodetection for Gameblaster. (games can find it now)
- Change render preferences a bit to be more compatible with Windows 7.
- Add DOS fixes to terminate program. (fixes Fortune Teller)
- Add FFREEP. (fixes Trucks)
- Improve FPU ST80 in C mode when writing zero. (fixes Antigok)
- Add special int10 scanline function. (fixes mz700 and probably lots
of games that mess with them)
- Fix scrolling in rarely used video modes. (fixes Orphee)
- Modify game specific hacks a bit so that Kick off 3 works again.
- Lots of fixes to the INT10 video parameter table. (Seven spirits
of ra and others)
- Add VGA blanking in machine=vgaonly. (used by Alien Carnage)
- CGA, PCJr, Tandy: Add video blanking, change display start latch
timing, sync pulse width correction.
- PCJr, Tandy: implement vertical retrace interrupt.
- PCJr, CGA: line-by-line video emulation.
- PCJr: support on-screen change of color modes 4medium to 16low. (used
by Ghostbusters booter)
- Hercules: Add green and amber monochrome support.
- All machines: only update the video timing when needed. (Jungle Hunt,
others that synchronize to the video screen might profit)
- Several small DOS fixes.
- Some UMB related fixes. (The Legacy without UMB)
- Fix version number of DSP for SB 1.5. (fixes a few games)
- Several VGA emulation improvements. (Allertone football manager)
- Some Tandy fixes. (Mech Warrior)
- Small improvements and fixes to the OPL emulation.
- Add low level Tandy DAC emulation.
- Some EMS fixes. (fixes Mortal Kombat and others)
- Change SoundBlaster DSP reset mechanism, add sb irq acknowledge logic.
(fixes stmik-based applications)
- Some interrupt pointer location modifications. (fixes Tinker Tales)
- Some fixes to the BOOT code. (fixes Last Mission)
- Respect write-only file information. (fixes Champions of Zulala)
- Some RTC fix. (fixes Tully Bodine and others)
- Improve mouse emulation to work better with Water World.
- Hopefully fix the translation of the configuration file.
- Speed up and fixes for the recompiler core. (pitfall2 pcjr)
- Change memory start location. (fixes 7th Guest installer)
- Several fixes to the batch file handling. (Shift and
use the typed first %0 instead of the parsed %0)
- Improve file redirection and redirected line ends. (fixes
Phantasmagoria 2 DOS installer)
- Fix compilation with new MAC os X version.
- Add 16C550A FIFO support to the serial port emulation.
- Improve modem emulation to get higher speeds.
- Change default samplerates to 44100, blocksize to 1024 and prebuffer to 20,
so that hopefully certain soundcards produce more fluent sound playback.
- Add some rarely used, but for some games critical flags to
the internal commands.
- Add -userconf flag, so that the userspecific configuration can
easily be used together with -conf configfile.
- Improve internal timing with repeating timers (especially with
the dynamic core).
(missed those and *emacs* the first time round because they pull
in their png dependencies via default-on options; they were included
in the test bulk build though)
The new version of tme, 0.8, can also emulate an Ultra 1, and
on x86 hosts with a supported host OS, the SPARCstation 2 and Ultra 1
emulations will now do dynamic binary translation. NetBSD 5.x seems
to run pretty well on the different emulations.
GNS3 is a graphical network simulator that allows you to design complex
network topologies. You may run simulations or configure devices ranging from
simple workstations to powerful Cisco routers. It is based on Dynamips, an IOS
emulator which allows users to run IOS binary images from Cisco Systems and
Pemu, an PIX firewall emulator based on Qemu.
---
Change Log For V3.8-1
SCP and libraries:
* Fixed bug in DETACH ALL if called at simulator exit (from Dave Bryan)
* Fixed bug in DO command handling of null arguments (from Dave Bryan)
* Fixed bug in DO handling of \\ (literal backslash) (from Dave Bryan)
* Fixed warnings in help printouts
HP2100 (all changes from Dave Bryan)
* Corrected DMS violation register set conditions
* JSB to 0/1 with W5 out and fence = 0 erroneously causes MP abort
* Fixed DJP, SJP, and UJP jump target validation
* BACI: Fixed STC,C losing interrupt request on BREAK
* MPX: Implemented 12792C eight-channel terminal multiplexer
* MT: Fixed missing flag after CLR command
* PIF: Implemented 12620A/12936A Privileged Interrupt Fences
IBM 1401:
* Fixed bug in ZA and ZS (from Bob Abeles)
* Fixed tape indicator implementation (from Bob Abeles)
* Added missing magtape modifier A (from Van Snyder)
* Added -n (no rewind) option to BOOT (from Van Snyder)
* Fixed bug to mask input to 6b on read (from Bob Abeles)
PDP11:
* Moved all Unibus/Qbus support routines to common I/O library
* Fxed bug in ASHP left overflow calc
* Fixed bug in DIVx
VAX:
* Fxed bug in ASHP left overflow calc
* Fixed bug in DIVx
* Resync time of day clock on any clock reset
---
Also some pkgsrc fixes, including Linux build:
* add MAKE_FLAGS in pkgsrc Makefile to define USE_NETWORK in dist makefile
* reorganize patch-aa for makefile to reduce diffs:
* use gmake (USE_TOOLS+=gmake in Makefile)
* check OSTYPE properly (so that it also builds on Linux)
* use "else <conditional-directive>" for OSTYPE checks
* revert previous gcc -> ${CC} change since -std=c99 seems mandatory
* update patch-ac for upstream cosmetics (for "set telnet" using raw mode)
* remove patch-ad for inline definitions since upstream has disabled it
* remove INSTALL_DATA_DIR as suggested by pkglint
Tested on NetBSD/i386 -current and CentOS 5.4 i386.
* Fixed HD boot drive when drive C: does not exist. TOS 2.06 was
crashing during the boot process when drive C: did not exist, but
* Fixed drive enumeration of GEMDOS HD emulation. Single partition
GEMDOS HD emulation did not work anymore when an ACSI HD image was
also used, due to some problems with the automatic drive letter detection.
* Fix ConnectedDriveMask with multiple, non-contiguous GEMDOS partitions.
* Fix to incorrect use of DESTDIR in python-ui installation
* more compact debugger output (return to emulation msg)
* update copyright, fix trace settings names
* fix: debugger memdump/disasm show/save/load need now to use '$' for hex
* Improved the CSS of the manual and compatibility list. The "font-
family:Fixed" did not work at all on Windows. Also cleaned up the
CSS in general.
* The hatari icons for the Windows executable must not be put into an
archive for linking.
---
version 0.12.4:
- Workaround for broken OSS_GETVERSION on FreeBSD, part two (Juergen Lock)
- oss: fix fragment setting (malc)
- oss: issue OSS_GETVERSION ioctl only when needed (malc)
- oss: refactor code around policy setting (malc)
- oss: workaround for cases when OSS_GETVERSION is not defined (malc)
- block: Free iovec arrays allocated by multiwrite_merge() (Stefan Hajnoczi)
- lsi: fix segfault in lsi_command_complete (Gerd Hoffmann)
- lsi: pass lsi_request to lsi_reselect (Gerd Hoffmann)
- lsi: move dma_len+dma_buf into lsi_request (Gerd Hoffmann)
- lsi: move current_dev into lsi_request (Gerd Hoffmann)
- lsi: have lsi_request for the whole life time of the request. (Gerd Hoffmann)
- lsi: use QTAILQ for lsi_queue (Gerd Hoffmann)
- tcp/mips: Change TCG_AREG0 (fp -> s0) (Stefan Weil)
- sh_pci: fix memory and I/O access (Aurelien Jarno)
- Fix incoming migration with iothread (Marcelo Tosatti)
- Fix SIGFPE for vnc display of width/height = 1 (Chris Webb)
- net: remove broken net_set_boot_mask() boot device validation (Eduardo Habkost)
- qcow2: Remove request from in-flight list after error (Kevin Wolf)
- qcow2: Don't ignore immediate read/write failures (Kevin Wolf)
- block: Fix multiwrite memory leak in error case (Kevin Wolf)
- block: Fix error code in multiwrite for immediate failures (Kevin Wolf)
- block: Fix multiwrite error handling (Kevin Wolf)
- scsi-disk: fix buffer overflow (Gerd Hoffmann)
- qcow2: Rewrite alloc_refcount_block/grow_refcount_table (Kevin Wolf)
- qcow2: Factor next_refcount_table_size out (Kevin Wolf)
- block: avoid creating too large iovecs in multiwrite_merge (Christoph Hellwig)
- json-parser: Fix segfault on malformed input (Kevin Wolf)
- linux-user: switch default ppc64 CPU to 970fx from 970 (Aurelien Jarno)
- target-sh4: MMU: fix store queue addresses (Aurelien Jarno)
- target-sh4: MMU: fix ITLB priviledge check (Aurelien Jarno)
- target-sh4: MMU: fix mem_idx computation (Aurelien Jarno)
- sh7750: handle MMUCR TI bit (Aurelien Jarno)
- UHCI spurious interrut fix (Paul Brook)
- tcg/mips: fix branch offset during retranslation (Aurelien Jarno)
- tcg/arm: correctly save/restore registers in prologue/epilogue (Aurelien Jarno)
- workaround for cmd646 bmdma register access while no dma is active (Igor V. Kovalenko)
- Fix corner case in chardev udp: parameter (Jan Kiszka)
- Don't set default monitor when there is a mux'ed one (Jan Kiszka)
- spelling typo (compatibilty) in hw/fw_cfg.c (Vagrant Cascadian)
- fdc: fix drive property handling. (Gerd Hoffmann)
- target-i386: fix commit c22549204a6edc431e8e4358e61bd56386ff6957 (TeLeMan)
- target-i386: fix SIB decoding with index = 4 (Aurelien Jarno)
- Fix segfault with ram_size > 4095M without kvm (Ryan Harper)
- target-i386: Fix long jumps/calls in long mode with REX.W set (malc)
- target-i386: fix lddqu SSE instruction (Aurelien Jarno)
- qemu-char.c: drop debug printfs from qemu_chr_parse_compat (Jan Kiszka)
- fix undefined shifts by >32 (Paolo Bonzini)
- Fix qemu -net user,hostfwd= example (Aurelien Jarno)
---
Also add a patch for e1000.c NIC to make wm(4) work on NetBSD guest:
---
* Reset EEPROM internal state on CS rise edge,
not SK rise edge during CS is low, per CS pin description in
the FM93C06 EEPROM manual:
"... a rising edge on this signal is required to reset the
internal state-machine to accept a new cycle ..."
Intel's em driver seems to explicitly raise and lower SK output
after CS is negated in em_standby_eeprom() so many other OSes
that use Intel's driver don't have this problem, but I can't find
articles that say the MICROWIRE or EEPROM spec requires such sequence.
* It isn't a good idea to use memset(,0,) to clear EEPROM state values,
so explicitly clear status members and preserve the previous EECD values
---
This patch is also filed as upstream QEMU bugs #581737.
While here, several tweaks in Makefile to appease pkglint.
---
The main change between release 0.4.7.2 and 0.6.0 is:
* Since late 2007, a complete rewrite of the emulator's base framework
has been going on. GXemul 0.6.0 is a very early release of the new
framework. So far, only the testm88k machine mode has been rewritten
to use the new framework, all other machine modes run in legacy mode
using the old framework (which is still included).
In other words: For most emulation modes, 0.6.0 will be exactly
like 0.4.7.2.
In addition to the new framework, a couple of other changes are
worth mentioning:
* Many unused, rarely used, and bogus emulation modes and features
were removed, to reduce the maintenance burden.
* Some operating systems listed on the guest OS page have had
new releases; the documentation has been updated to reflect this.
* New source code (but not the legacy part) is documented using
Doxygen comments, and there is a unit testing framework in place.
* There is now finally an install Makefile target, and the -j make
option can be used to parallelize builds.
Please read the HISTORY file for more details.
---
Also update pkgsrc files:
* update COMMENT and DESCR per the latest release note
* remove MAKE_JOBS_SAFE=no as mentioned in the above changes list.
intended, the format string parser that generates the va_list does not support
all formatting characters.
Make this code portable by failing to parse any format string at all, not just
the ones that aren't fully supported.
Bump PKGREVISION for the functional change, though this code is probably
generally unused anyway. Unmark as BROKEN and NOT_FOR_PLATFORM - I think all
uses of va_list casts are inhibited.
Dynagen is a front-end for use with the Dynamips Cisco router emulator.
It uses an INI-like configuration file to provision Dynamips emulator
networks. It takes care of specifying the right port adapters, generating
and matching up those pesky NIO descriptors, specifying bridges,
frame-relay, ATM switches, etc. It also provides a management CLI for
listing devices, suspending and reloading instances, determining and
managing idle-pc values, performing packet captures, etc.
0.2.8-RC2
* mainly a bug fix release
0.2.8-RC1
* hypervisor control protocol has been modified
* Support of the Cisco 1700 platforms, with WIC-1T, WIC-2T and
WIC-1ENET cards
* Support of WIC-1T and WIC-2T for the 2600, 2691, 3725 and 3745.
* Support of NM-NAM and NM-CIDS interfaces.
* Plugin system
* Bug fixes.
snes9x version.
Snes9x 1.52
- IMPORTANT NOTICE: The structure of savestates (also known
as snapshots / freeze files) is incompatible with older
versions! Snes9x 1.52 cannot read the savestates created
by 1.51 or older. (zones)
- Highly acculate SPC700 and S-DSP emulation. (Blargg)
- Replaced APU emulation cores (SPC700 and S-DSP) with
ones provided by Blargg's SNES_SPC library. This renders
savestates incompatible with older versions. (BearOso, zones)
- SPC7110 emulation. (byuu, neviksti)
- Merged bsnes' SPC7110 emulation code. Note that the .rtc
file of Far East of Eden Zero is incompatible with older
versions. (zones)
- Removed graphics pack support. It's no more necessary. (zones)
- Replaced S-RTC emulation code with bsnes' one to keep the
good compatibility of .rtc files between the two
emulators. As a result, Daikaijuu Monogatari 2 now
outputs the .rtc file, and its .srm file is incompatible
with older versions. (zones)
- Added savestate supports for DSP-2, DSP-4, ST-010 and
OBC1. (zones)
- Added UPS support. (byuu)
- Fixed DSP-4 AI problem. (Jonas Quinn)
- Fixed invalid memory accesses in C4 and OBC1 codes. (zones)
- Fixed invalid memory accesses in BSX codes. My mistake. (zones)
- Fixed the read value of $213e, $4210 and $4211. (zones)
- Fixed the writing of word values at the memory boundary. (zones)
- Fixed the bug that the unnecessary SA-1 emulation
continues once any SA-1 games are launched. (zones)
- Removed old color blending codes. (zones)
- Removed too-old Snes96 and ZSNES snapshot support. (zones)
- Updated command-line options. (zones)
- Code cleaning. (zones)
- GTK+ : Added a port of Snes9x to the GTK+ toolkit. (BearOso)
- Unix : Reconstructed and simplified all the contents.
Some features have been removed to be simple, and many
options have changed. GTK+ port is recommended for most
of Linux users. (zones)
New System Drivers Supported:
-----------------------------
- Consul 2717 with PMD-32 [Miodrag Milanovic]
- Elektor SC/MP [Miodrag Milanovic]
- Epoch Super Cassette Vision [Wilbert Pol]
- Hawthorne Technologies TinyGiant HT68k [Miodrag Milanovic]
- Hector MX40c [JJ Stacino]
- Hector MX80c [JJ Stacino]
- Microsystems International Limited MOD-8 [Miodrag Milanovic]
- MITS Altair 8800bt [Miodrag Milanovic]
- Robotron K1003 [Miodrag Milanovic]
- Science of Cambridge MK-14 [Miodrag Milanovic]
Systems Promoted from GAME_NOT_WORKING:
---------------------------------------
- Ausbaufähiger Mikrocomputer mit dem U 880 (Huebler/Everts) [Curt Coder]
- Hector 2HR+ [JJ Stacino]
- Hector 2HR [JJ Stacino]
- Hector HRX [JJ Stacino]
- Kaypro 4 [Robbbert]
- Kaypro 10 [Robbbert]
- Omni II [Robbbert]
- Victor [JJ Stacino]
- XOR S-100-12 [Curt Coder]
System Driver Changes:
----------------------
- [APEXC] Fixed image loading [Robbbert]
- [BETA] Fixed display flickering. [Curt Coder]
- [C64] Emulated the Commodore 1541 disk drive at hardware level.
G64 images are now supported (D64 support coming) [Curt Coder]
- [EXL100] Added 7041 rom dump. [Wilbert Pol]
- [EXIDY] Improved sound compatibility. [Robbbert]
- [FMTOWNS] Various updates: [Barry Rodewald]
* Added FDC IRQ and disk density select
* Fixed ANK CG ROM enable
* Re-worked VRAM access, allowing startup logos to display on the Marty and Car Marty
* Added basic keyboard support
* Added standard 2 button joystick support
* Corrected text mode colours
* Implemented CD-ROM controller, and CD-DA support
* Hooked up YM3438 interrupts
* Re-worked video code to support a basic CRTC implementation
* Fixed VBlank IRQ
* Added sprite implementation
* Mapped RF5C68 wave RAM
- [GBA] Remapped Select button to MESS default. [Justin Kerk]
- [GLASGOW] Upgraded artwork to be clickable. Fixed various driver
problems. Chess can be played by using the mouse. [Robbbert]
- [HUEBLER] Added keyboard. [Curt Coder]
- [INTV] Fixed intvkbd. Fixed disassembler. [Robbbert]
- [MPF1] Converted to use driver state, added speech and printer
ROMs, implemented MONI/INTR keys, monitor BREAK logic, added
artwork for mpf1b, added layout for mpf1p. [Curt Coder]
- [ORIC] Telstrat regression has been fixed. [Robbbert]
- [SMS] Added SegaScope (3D-Glasses) support to Sega Master System I
drivers (i.e. sms1, sms1pal, smsj & sg1000m3). To enable this, enter
Driver Configuration menu and turn on SegaScope, then go in the Video
Options menu and choose one of the SegaScope views. [Fabio Priuli]
- [SMS] Added Terebi Oekaki graphic board support to Japanese drivers
(i.e. smsj & sg1000m3). To enable this, start emulation of "Terebi
Oekaki", then enter Driver Configuration menu and turn on the Tablet.
Once enabled, remappable controls will also appear in the Input (this
System) menu. [Fabio Priuli]
- [SMS] Added Reset button to SMS1 and improved Lightgun behavior based
on "Color & Switch Test". [Enik Land]
- [TI81] Added v1.6K BIOS dump. [critor]
- [TI85/TI86] Converted the serial interface to a device. [Wilbert Pol]
- [TI99] Fixed a crash when the user mounts cartridge dump files in legacy
mode. [Michael Zapf]
- [XOR100] Added terminal support. [Curt Coder]
Source Changes:
----------------
- The core is based on MAME 0.136. This incorporates all features of the
update to this core. [MAME team]
- Cleanups (static qualifiers, headers, renames, reduced global symbols, dead
code cleanups, brace cleanups, and more multisession friendly init code).
[Atari Ace]
- WD17xx write track supported in proper way instead of using more
sector writes [Michael Zapf]
- Added F4 character-set viewer to many computers [Robbbert]
- The -listdevices option has been temporarily renamed to -listmedia,
until it is merged with MAME's -listdevices command [Robbbert]
- Fixed bug 1770. Listmedia will indicate if a driver has no devices,
or if the driver doesn't exist. [Robbbert]
