Install headers in separate directory.
Related changes:
- Patch for Kenwood TruX drives (they worked before, but were very slow)
- Slightly different default read command to alleviate end-of-track
read problems on a number of drives
- New -z command syntax; option argument to allow a skip after a
user-configurable number of tries
- Added more possible read commands to autoprobe
- Removed autoprobe limitation, so starting a new rip will not
potentially stall in autoprobe until previous rip finishes
- Patch to allow sample-granulairy offset
- allow NULL callbacks to be passed to library interface
the original implementation. Actually, one of my drive takes more than
10s for seeking a track and causes inconsistency of the aic SCSI driver.
Yeah, the driver should not fail, but that is a different problem.... :)
- Implement read speed selection (-S option). The unit is 1000byte/s.
"-S 176" for 1x speed, "-S 352" for 2x speed, and so on. If the
specified value is smaller than 176, it will be multiplied by 176,
so "-S 1" also selects 1x speed. "-S 0" selects the maximum speed.
This is an experimental feature and the interface will likely change.
CD-DA extraction tool with excessive data corrections,
such as jitter, loss of data, etc.
This will soon be obsoleted by cdparanoia IV, I hope....
Most SCSI/ATAPI CD-ROM drives should work fine.
However, the ATAPI stuff is totally untested, and
if it happened to work, it was a miracle. :-)
Currently,
- the feature to search for CD-ROM device is not
implemented and the -g option is required,
- the libraries are not installed.
