makeinfo if no native makeinfo executable exists. Honor TEXINFO_REQD
when determining whether the native makeinfo can be used.
* Remove USE_MAKEINFO and replace it with USE_TOOLS+=makeinfo.
* Get rid of all the "split" argument deduction for makeinfo since
the PLIST module already handles varying numbers of split info files
correctly.
NOTE: Platforms that have "makeinfo" in the base system should check
that the makeinfo entries of pkgsrc/mk/tools.${OPSYS}.mk are
correct.
Several changes are involved since they are all interrelated. These
changes affect about 1000 files.
The first major change is rewriting bsd.builtin.mk as well as all of
the builtin.mk files to follow the new example in bsd.builtin.mk.
The loop to include all of the builtin.mk files needed by the package
is moved from bsd.builtin.mk and into bsd.buildlink3.mk. bsd.builtin.mk
is now included by each of the individual builtin.mk files and provides
some common logic for all of the builtin.mk files. Currently, this
includes the computation for whether the native or pkgsrc version of
the package is preferred. This causes USE_BUILTIN.* to be correctly
set when one builtin.mk file includes another.
The second major change is teach the builtin.mk files to consider
files under ${LOCALBASE} to be from pkgsrc-controlled packages. Most
of the builtin.mk files test for the presence of built-in software by
checking for the existence of certain files, e.g. <pthread.h>, and we
now assume that if that file is under ${LOCALBASE}, then it must be
from pkgsrc. This modification is a nod toward LOCALBASE=/usr. The
exceptions to this new check are the X11 distribution packages, which
are handled specially as noted below.
The third major change is providing builtin.mk and version.mk files
for each of the X11 distribution packages in pkgsrc. The builtin.mk
file can detect whether the native X11 distribution is the same as
the one provided by pkgsrc, and the version.mk file computes the
version of the X11 distribution package, whether it's built-in or not.
The fourth major change is that the buildlink3.mk files for X11 packages
that install parts which are part of X11 distribution packages, e.g.
Xpm, Xcursor, etc., now use imake to query the X11 distribution for
whether the software is already provided by the X11 distribution.
This is more accurate than grepping for a symbol name in the imake
config files. Using imake required sprinkling various builtin-imake.mk
helper files into pkgsrc directories. These files are used as input
to imake since imake can't use stdin for that purpose.
The fifth major change is in how packages note that they use X11.
Instead of setting USE_X11, package Makefiles should now include
x11.buildlink3.mk instead. This causes the X11 package buildlink3
and builtin logic to be executed at the correct place for buildlink3.mk
and builtin.mk files that previously set USE_X11, and fixes packages
that relied on buildlink3.mk files to implicitly note that X11 is
needed. Package buildlink3.mk should also include x11.buildlink3.mk
when linking against the package libraries requires also linking
against the X11 libraries. Where it was obvious, redundant inclusions
of x11.buildlink3.mk have been removed.
There have been many many bug fixes and improvements since the last
packaged release. SVG, PDF, and DXF output is available now. The complete
list (>200 lines) is in the CHANGES file in the distribution.
in the process. (More information on tech-pkg.)
Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.
Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.
all dependencies on packages depending on "png" which contain shared
libraries, all for the (imminent) update to the "png" package.
[List courtesy of John Darrow, courtesy of "bulk-build".]
Summary of changes:
- removal of USE_GTEXINFO
- addition of mk/texinfo.mk
- inclusion of this file in package Makefiles requiring it
- `install-info' substituted by `${INSTALL_INFO}' in PLISTs
- tuning of mk/bsd.pkg.mk:
removal of USE_GTEXINFO
INSTALL_INFO added to PLIST_SUBST
`${INSTALL_INFO}' replace `install-info' in target rules
print-PLIST target now generate `${INSTALL_INFO}' instead of `install-info'
- a couple of new patch files added for a handful of packages
- setting of the TEXINFO_OVERRIDE "switch" in packages Makefiles requiring it
- devel/cssc marked requiring texinfo 4.0
- a couple of packages Makefiles were tuned with respect of INFO_FILES and
makeinfo command usage
See -newly added by this commit- section 10.24 of Packages.txt for
further information.
foo-* to foo-[0-9]*. This is to cause the dependencies to match only the
packages whose base package name is "foo", and not those named "foo-bar".
A concrete example is p5-Net-* matching p5-Net-DNS as well as p5-Net. Also
change dependency examples in Packages.txt to reflect this.
Changes are:
Bug fixes:
- Added polygon mode support for CI
- Label characters from unsupported fonts are now replaced by their
charset 0 equivalents instead of being replaced by blanks.
- Text was sometimes incorrectly clipped when IW was set
- Fixed a typo (missing parenthesis) in the Sun5 part of generic.mak
- Polygon fills were (again) miscalculated in some cases
- The 'pen dot' feature was unnecessarily adding dots for the segments of
polylines as well
- PS command with height only and PS with width>height were not treated
correctly, rotation and scaling were applied twice due to code duplication
- small (cosmetic) corrections to the new linetype code (A. Bird)
- lines drawn in IW mode had extraneous pen-up moves added, which confused
the line pattern generator.
- clipping (IW) was seriously broken by cleanup and prototyping efforts in
ALPHA2/3. Thanks to Andrew Bird for finding and fixing this.
Auto-generation of output filenames sometimes failed (side effect of
the less restrictive naming rules introduced in ALPHA2)
- removed extraneous asterisk in the INFO-DIR-ENTRY section of the
texinfo doc file (Reinhard Kotucha)
- IW without parameters was assigned wrong values in some cases (bug
introduced in ALPHA2)
- IW could clip lines just inside the limits due to rounding errors on
some platforms
- chanell makefiles to include fillpoly.(c,o)
- Line pattern length was too long for LT-2
- SC scale factors were not applied to XT/YT tick marks, resulting in
distorted plots
- Added a #define to support compiling on WinNT (mentioned, but not
actually included in ALPHA2)
- deactivated the excessive debug output in the fill code (which could lead
to huge temporary files)
- made the simple scanline algorithm a bit more robust (but it still gets out
of step in a few pathological cases - which means that filled and unfilled
sections will be reversed for the remainder of that line)
- enclosed all references to the unfinished Epson driver in #ifdefs, so that
it is not built by default. (also fixed a few glaring bugs in the esc/p2 file
header code, but the driver still does not work _at_all_)
- absolute PW pen widths between 0 and .1 were accidentally rounded to zero
(invisible lines)
- the picture border was too wide in some cases (Gerhard Buergmann)
- IW limits were interpreted as plotter units even if scaling (SC) was set.
- PCX output sometimes had dark red background in b/w mode and wrong colors
in colormap mode (rewrote to_pcx.c for PCX5, see above).
New Features:
- Support for HPGL/2 commands related to polygons and area fills :
EP, ER, FP, FT, PM, PT, RA, RR, WG (no user-defined fill types yet)
- WU command support, PW fixed accordingly.
- AT,RT command support (arc through three points)
- Initial (non-functional) version of an Epson Esc/P2 driver based on
to_pcl.
- Parser improved to be more robust (especially with PE commands),
cliping (IW) support for PE lines, PJL and RTL control sequence handler,
type 1 and 2 (anisotropic) scaling support added to SC (Eugene Doudine).
- Modified to_pcx to produce PCX mode 5 (truecolor) files in color mode,
PCX2 in monochrome. (The old PCX2 module is in the 'old' directory, in
case this proves to be worse - i have changed a few of the palette
definitions to get correct b/w output and primary colors even with this
version).
- New linetype handling including support for line types 7,8,-7,-8 and
user-defined linetype (UL) (written by Andrew Bird)
- Support for the COmment keyword added (Andrew Bird)
- PD;PU-sequences without pen movement create a small dot now to mimick the
behaviour of a real pen plotter.
- Added -S option for selection of TIFF compression mode (Andrew Bird)
- Rewrote pen property handling - a pen can now change width during a
plot (Andrew Bird). Similarly added pencolor changing support (though for
the postscript driver only - all other modes require a rewrite of the
intermediate raster 'picbuf' code).
- Output mode 'esc2' for the Epson Stylus series of printers at 720dpi.
(limited to A4 size for now, and in 'microweave' mode, i.e. using only
one row of nozzles, which results in exact but very slow printing)
- added command line option '-n'/'--nofill' to suppress polygon filling
- OS/2 PM previewer now has stderr output redirection to a separate window
(patch provided by Kazutaka Nishiyama)
- Added step-by-step instructions for compiling on Windows NT (provided by
James D. Shaw)
- X11 preview generates a warning, but no longer aborts if the window is
larger than the current screen size
- file names may start with non-alphabetic characters (e.g. numbers
or unix-style path names) now (Michael Kennedy)
using the newest PNG library won't work on system with an older one. To
prevent such problems with precompiled binary packages require at least
"png-1.0.9nb1" in all dependences.
;PU;PA 50,200;PD;PU;
this now actually puts a single dot at 50,200
many thanks to the programs author, Dr. Martin Kroeker <mk@daveg.com>
for supplying the patch.
From the CHANGES file:
----------------------
Changes from 3.3.1 to 3.3.2
New features:
- Added TIFF output mode (provided by M.Liberi) based on libtiff. Uses ZIP
deflate compression to avoid LZW patent issues at the risk of reduced
portability.
- DV command (vertical text)
Bug fixes:
- Command line options for pen color and pen width take precedence over PC
or PW statements in the HPGL file now. This allows creation of PBM bitmaps
instead of PPM pixmaps from color plots again (by setting all pens to
black, -c11111111), and should also help for programs that use several pens
at constant widths, but emit global PW commands with every SP statement.
A true fix for the latter case would require keeping track of the current
pen settings for every line in the internal metaformat (maybe in 3.4)
- Removed the A4 size limitation for Encapsulated PostScript output
- Default 20x20 plot size calculation was broken for Landscape format
- Black pen was displayed as light gray in X11 preview, now uses a very dark
gray (gray10)
- pen color was not decoded correctly in PE pencolor statements
- output file was closed twice in to_eps.c, which could cause a segmentation
fault inside (g)libc if hp2xx was used in batch mode
Changes from 3.3.0 to 3.3.1
New features:
- PE with fractional coordinates (completes PE support)
- unlimited label lengths through dynamic reallocation of LB memory
Bug fixes:
- PS/RO handling was still broken, should be fixed now
- xfig file headers had erroneously claimed 3.2 compliance, but the files
still had 3.1 format
- Makefiles in ~/makes updated
- DR and DI did not initialize character properties when called without
parameters
- Current address of Michael Schmitz added to documentation
- removed leftover PCL file acad.pcl from hp-tests
Changes from 3.3.ALPHA2 to 3.3.0
New features:
(none)
Bug fixes:
- Combinations of PS, RO and the -r command line switch could lead to
wrong scaling
- the position of a clipping box was miscalculated for labels
Changes from 3.3.ALPHA to 3.3.ALPHA2:
New features:
- the PS (plot size) command is now supported, allowing 'white space'
around plots
- support for the EW (edge wedge) command
Bug fixes:
- PC support in 3.3.ALPHA was still limited to 8 colors
- PW had the parameters backwards and no provision for the
'set them all to this value' variant
- tick marks were scaled incorrectly (long-standing bug)
- EA advanced pen position (long-standing bug)
Changes from 3.2.0 to 3.3.ALPHA:
New features:
- Character set support for fonts 1-7, and the 'upper half' of font 0.
- Support for most character-related commands (CA,CS,SA,SS)
- Support for the IW (input window, i.e. clipping) command
- Partial support for the PE (polyline encoded) command (integer coords only)
- Output generation for Brian Smith's XFig
- Output generation for Gnuplot
- Output generation in PNG format
- Automatic medium size selection code in the PCL initialization sequence
- Centering (-C) now supported even in true-size (-t) mode
- HPGL/2 Pen Color and Pen Width support for up to 256 virtual pens
- New, optional Makefile variable HOMEPAGE, specifies a URL for
the home page of the software if it has one.
- The value of HOMEPAGE is used to add a link from the
README.html files.
- pkglint updated to know about it. The "correct" location for
HOMEPAGE in the Makefile is after MAINTAINER, in that same
section.
