"Looks good" from wiz@ and obache@.
ChangeLog for 0.13.0 is not updated but there is a list in announcement:
This release consists of over 2,500 commits from 145 contributors.
Some major features were added in this release including:
- vhost-net: kernel-accelerating network backend for virtio devices (using KVM)
- qmp: significant improvements covering most monitor commands
- vnc: introduction of new encodings that dramatically improve bandwidth
(part of GSoC project)
- ivshmem: new shared memory device allowing multiple guests to share
a memory region
- mips: introduction of fulong mini-pc
- virtio-9p: introduction of a paravirtual file system passthrough mechanism
- hpet: many enhancements
- target-s390: support for s390 usermode emulation
- many more features and bug fixes
A special note about QMP support in 0.13.0. QMP is still considered
experimental in 0.13.0. There are no plans to change the protocol
in an incompatible way but there are likely to be missing features.
ChangeLog for version 0.12.5:
- audio/alsa: Handle SND_PCM_STATE_SETUP in alsa_poll_handler
- block: Handle multiwrite errors only when all requests have completed
- block: Fix early failure in multiwrite
- vpc: Use bdrv_(p)write_sync for metadata writes
- vmdk: Use bdrv_(p)write_sync for metadata writes
- qcow2: Use bdrv_(p)write_sync for metadata writes
- qcow: Use bdrv_(p)write_sync for metadata writes
- block: Add bdrv_(p)write_sync
- qcow2: Restore L1 entry on l2_allocate failure
- block/vdi: Fix image opening and creation for odd disk sizes
- block/vpc: Fix conversion from size to disk geometry
- qcow2: Remove abort on free_clusters failure
- vmdk: Fix COW
- qcow2: Fix creation of large images
- vmdk: fix double free
- qemu-options: add documentation for stdio signal=on|off
- target-arm : fix parallel saturated subtraction implementation
- target-arm : fix thumb2 parallel add/sub opcode decoding
- target-arm: fix addsub/subadd implementation
- target-i386: fix xchg rax,r8
- block/vvfat.c: fix warnings with _FORTIFY_SOURCE
- audio/alsa: Spelling typo (paramters)
- target-mips: fix DINSU instruction
- Correct definitions for FD_CMD_SAVE and FD_CMD_RESTORE
- qcow2: Fix corruption after error in update_refcount
- qcow2: Fix corruption after refblock allocation
- block: Fix multiwrite with overlapping requests
- qcow2: Fix error handling in l2_allocate
- qcow2: Clear L2 table cache after write error
- ide: Fix ide_dma_cancel
- usb-bus: fix no params
- Avoid crash on '-usbdevice <device>' without parameters
- Fix -usbdevice crash
- Fix multiboot compilation
- Fix missing symbols in .rel/.rela.plt sections
- target-ppc: fix RFI by clearing some bits of MSR
- Fix typo in balloon help
- arm_timer: fix oneshot mode
- arm_timer: reload timer when enabled
- qemu-sockets: avoid strlen of NULL pointer
- block: fix aio_flush segfaults for read-only protocols (e.g. curl)
- virtio-blk: fix barrier support
- block: fix sector comparism in multiwrite_req_compare
- pci: irq_state vmstate breakage
- qemu-img: use the heap instead of the huge stack array for win32
Pkgsrc changes:
patch-aa
patch-ao
patch-ba
patch-de
patch-ed
- lifted from previous (some adjustments per upstream changes)
patch-ab
- removed (looks similar fix applied in upstream)
patch-dd
- adjust configure for location of man page dir (as previous)
- fix detection for arm hosts
patch-dk
- removed (looks no longer applicable due to reorganized upstream)
patch-ee
- remove old e1000.c fix (pulled up to upstream)
- pull block/sheepdog.c build fix on *BSD hosts from upstream
patch-ef
patch-eg
patch-eh
patch-ei
- workaround for conflicts with SSP read() macro in NetBSD's <ssp/unistd.h>
(PR lib/43832: ssp causes common names to be defines)
patch-ej
- pull build/warning fixes in ui/vnc-enc-tight.c from upstream
patch-ek
- pull ATA PIO fix (by jakllsch@) from upstream
- pull warning fix from upstream
patch-el
- workaround for missing C99 FP macro on netbsd-4
(PR pkg/42899, but od(1) fixes for netbsd-4 not included)
patch-em
patch-en
- build fix on NetBSD/arm host using gcc-4.1.3
(built qemu binary on NetBSD/hpcarm host fails though)
patch-eo
patch-ep
patch-er
patch-es
- pull ESP SCSI DMA fixes (that might affect sparc) from upstream
patch-eq
- pull ESP SCSI DMA fixes from upstream
- disable broken ARC JAZZ floppy that causes hang on MIPS NT 4.0 guest
Makefile
- bump DISTNAME
- add makeinfo to USE_TOOLS
XXX: gets "qemu-doc.texi:7: warning: unrecognized encoding name `UTF-8'."
- adjust SUBST_FILES.qaudio per upstream changes
- enable nbd support *BSD per upstream update
PLIST
distinfo
- update per each file
---
version 0.12.4:
- Workaround for broken OSS_GETVERSION on FreeBSD, part two (Juergen Lock)
- oss: fix fragment setting (malc)
- oss: issue OSS_GETVERSION ioctl only when needed (malc)
- oss: refactor code around policy setting (malc)
- oss: workaround for cases when OSS_GETVERSION is not defined (malc)
- block: Free iovec arrays allocated by multiwrite_merge() (Stefan Hajnoczi)
- lsi: fix segfault in lsi_command_complete (Gerd Hoffmann)
- lsi: pass lsi_request to lsi_reselect (Gerd Hoffmann)
- lsi: move dma_len+dma_buf into lsi_request (Gerd Hoffmann)
- lsi: move current_dev into lsi_request (Gerd Hoffmann)
- lsi: have lsi_request for the whole life time of the request. (Gerd Hoffmann)
- lsi: use QTAILQ for lsi_queue (Gerd Hoffmann)
- tcp/mips: Change TCG_AREG0 (fp -> s0) (Stefan Weil)
- sh_pci: fix memory and I/O access (Aurelien Jarno)
- Fix incoming migration with iothread (Marcelo Tosatti)
- Fix SIGFPE for vnc display of width/height = 1 (Chris Webb)
- net: remove broken net_set_boot_mask() boot device validation (Eduardo Habkost)
- qcow2: Remove request from in-flight list after error (Kevin Wolf)
- qcow2: Don't ignore immediate read/write failures (Kevin Wolf)
- block: Fix multiwrite memory leak in error case (Kevin Wolf)
- block: Fix error code in multiwrite for immediate failures (Kevin Wolf)
- block: Fix multiwrite error handling (Kevin Wolf)
- scsi-disk: fix buffer overflow (Gerd Hoffmann)
- qcow2: Rewrite alloc_refcount_block/grow_refcount_table (Kevin Wolf)
- qcow2: Factor next_refcount_table_size out (Kevin Wolf)
- block: avoid creating too large iovecs in multiwrite_merge (Christoph Hellwig)
- json-parser: Fix segfault on malformed input (Kevin Wolf)
- linux-user: switch default ppc64 CPU to 970fx from 970 (Aurelien Jarno)
- target-sh4: MMU: fix store queue addresses (Aurelien Jarno)
- target-sh4: MMU: fix ITLB priviledge check (Aurelien Jarno)
- target-sh4: MMU: fix mem_idx computation (Aurelien Jarno)
- sh7750: handle MMUCR TI bit (Aurelien Jarno)
- UHCI spurious interrut fix (Paul Brook)
- tcg/mips: fix branch offset during retranslation (Aurelien Jarno)
- tcg/arm: correctly save/restore registers in prologue/epilogue (Aurelien Jarno)
- workaround for cmd646 bmdma register access while no dma is active (Igor V. Kovalenko)
- Fix corner case in chardev udp: parameter (Jan Kiszka)
- Don't set default monitor when there is a mux'ed one (Jan Kiszka)
- spelling typo (compatibilty) in hw/fw_cfg.c (Vagrant Cascadian)
- fdc: fix drive property handling. (Gerd Hoffmann)
- target-i386: fix commit c22549204a6edc431e8e4358e61bd56386ff6957 (TeLeMan)
- target-i386: fix SIB decoding with index = 4 (Aurelien Jarno)
- Fix segfault with ram_size > 4095M without kvm (Ryan Harper)
- target-i386: Fix long jumps/calls in long mode with REX.W set (malc)
- target-i386: fix lddqu SSE instruction (Aurelien Jarno)
- qemu-char.c: drop debug printfs from qemu_chr_parse_compat (Jan Kiszka)
- fix undefined shifts by >32 (Paolo Bonzini)
- Fix qemu -net user,hostfwd= example (Aurelien Jarno)
---
Also add a patch for e1000.c NIC to make wm(4) work on NetBSD guest:
---
* Reset EEPROM internal state on CS rise edge,
not SK rise edge during CS is low, per CS pin description in
the FM93C06 EEPROM manual:
"... a rising edge on this signal is required to reset the
internal state-machine to accept a new cycle ..."
Intel's em driver seems to explicitly raise and lower SK output
after CS is negated in em_standby_eeprom() so many other OSes
that use Intel's driver don't have this problem, but I can't find
articles that say the MICROWIRE or EEPROM spec requires such sequence.
* It isn't a good idea to use memset(,0,) to clear EEPROM state values,
so explicitly clear status members and preserve the previous EECD values
---
This patch is also filed as upstream QEMU bugs #581737.
While here, several tweaks in Makefile to appease pkglint.
tap backend work on NetBSD (NetBSD uses an ioctl to get the tap name).
patch-ab: add support for the "select without ATN" to the emulated
esp device. NetBSD's esp(4) uses this command and aborts after a timeout.
While there fix the homepage URL.
Now NetBSD/sparc 5.0.1 boots and runs fine in qemu-system-sparc on a
NetBSD/amd64 host.
Bump pkgrevision.
Unknown why it was using this.
This closes PR 39571 and PR 37786.
Another suggestion is to use pkgsrc's MACHINE_ARCH.
(Not completely tested on DragonFly as this still doesn't build
due to wrong gcc.)
Also note this release is not the latest.
Emulate the speaker port's refresh clock bit. This is supposed
to toggle between 0 and 1<<4 every 15 microseconds. XXX: We use
gettimeofday() in the real machine instead of a monotonic clock
in the virtual machine, and we are a bit sloppy about the 15
microseconds. This should be good enough for crude loops that
measure approximate delays by counting how often this line toggles.
Bump PKGREVISION to 1
patch to let this build on systems without POSIX AIO.
version 0.9.0:
- Support for relative paths in backing files for disk images
- Async file I/O API
- New qcow2 disk image format
- Support of multiple VM snapshots
- Linux: specific host CDROM and floppy support
- SMM support
- Moved PCI init, MP table init and ACPI table init to Bochs BIOS
- Support for MIPS32 Release 2 instruction set (Thiemo Seufer)
- MIPS Malta system emulation (Aurelien Jarno, Stefan Weil)
- Darwin userspace emulation (Pierre d'Herbemont)
- m68k user support (Paul Brook)
- several x86 and x86_64 emulation fixes
- Mouse relative offset VNC extension (Anthony Liguori)
- PXE boot support (Anthony Liguori)
- '-daemonize' option (Anthony Liguori)
