All checksums have been double-checked against existing RMD160 and
SHA512 hashes
Not committed (merge conflicts...):
net/radsecproxy/distinfo
The following distfiles could not be fetched (fetched conditionally?):
./net/citrix_ica/distinfo citrix_ica-10.6.115659/en.linuxx86.tar.gz
./net/djbdns/distinfo dnscache-1.05-multiple-ip.patch
./net/djbdns/distinfo djbdns-1.05-test28.diff.xz
./net/djbdns/distinfo djbdns-1.05-ignoreip2.patch
./net/djbdns/distinfo djbdns-1.05-multiip.diff
./net/djbdns/distinfo djbdns-cachestats.patch
Unsorted entries in PLIST files have generated a pkglint warning for at
least 12 years. Somewhat more recently, pkglint has learned to sort
PLIST files automatically. Since pkglint 5.4.23, the sorting is only
done in obvious, simple cases. These have been applied by running:
pkglint -Cnone,PLIST -Wnone,plist-sort -r -F
From Alberto Mijares in PR pkg/52028.
[3.2.0](https://github.com/NagiosEnterprises/nrpe/releases/tag/nrpe-3.2.0) - 2017-06-26
---------------------------------------------------------------------------------------
**ENHANCEMENTS**
* Added max_commands definition to nrpe.cfg to rate limit simultaneous fork()ed children (Bryan Heden)
* Added -E, --stderr-to-stdout options for check_nrpe to redirect output (Bryan Heden)
* Added support for Gentoo init (Troy Lea @box293)
* Cleaned up code a bit, updated readmes and comments across the board (Bryan Heden)
* Added -V, --version to nrpe and fixed the output (Bryan Heden)
* Added different SSL error messages to be able to pinpoint where some SSL errors occured (Bryan Heden)
* Updated logic in al parse_allowed_hosts (Bryan Heden)
* Added builtin OpenSSL Engine support where available (Bryan Heden + @skrueger8)
* Clean up compilation warnings (Bryan Heden)
* Added more commented commands in nrpe.cfg (Bryan Heden)
**FIXES**
* Undefined check returns UNKNOWN (Bryan Heden)
* Fix incompatibility with OpenSSL 1.1.0 via SECLEVEL distinction (Bryan Heden)
* Fix ipv4 error in logfile even if address is ipv6 (Bryan Heden)
* Fix improper valid/invalid certificate warnings (Bryan Heden)
[3.1.1](https://github.com/NagiosEnterprises/nrpe/releases/tag/nrpe-3.1.1) - 2017-05-24
---------------------------------------------------------------------------------------
**FIXES**
* The '--log-file=' or '-g' option is missing from the help (John Frickson)
* check_nrpe = segfault when specifying a config file (John Frickson)
* Alternate log file not being used soon enough (John Frickson)
* Unable to compile v3.1.0rc1 with new SSL checks on rh5 (John Frickson)
* Unable to compile nrpe-3.1.0 - undefined references to va_start, va_end (John Frickson)
* Can't build on Debian Stretch, openssl 1.1.0c (John Frickson)
* Fix build failure with -Werror=format-security (Bas Couwenberg)
* Fixed a typo in `nrpe.spec.in` (John Frickson)
* More detailed error logging for SSL (John Frickson)
* Fix infinite loop when unresolvable host is in allowed_hosts (Nick / John Frickson)
[3.1.0](https://github.com/NagiosEnterprises/nrpe/releases/tag/nrpe-3.1.0) - 2017-04-17
---------------------------------------------------------------------------------------
**ENHANCEMENTS**
* Added option to nrpe.cfg.in that can override hard-coded NASTY_METACHARS (John Frickson)
* While processing 'include_dir' statement, sort the files (Philippe Kueck / John Frickson)
* nrpe can now write to a log file using 'log_file=' in nrpe.cfg (John Frickson)
* check_nrpe can now write to a log file using '--log-file=' or '-g' options (John Frickson)
**FIXES**
* Added missing debugging syslog entries, and changed printf()'s to syslog()'s. (Jobst Schmalenbach)
* Fix help output for ssl option (configure) (Ruben Kerkhof)
* Fixes to README.SSL.md and SECURITY.md (Elan Ruusamäe)
* Changed the 'check_load' command in nrpe.cfg.in (minusdavid)
* Cleanup of config.h.in suggested by Ruben Kerkhof
* Minor change to logging in check_nrpe (John Frickson)
* Solaris 11 detection is broken in configure (John Frickson)
* Removed function `b64_decode` which wasn't being used (John Frickson)
* check_nrpe ignores -a option when -f option is specified (John Frickson)
* Added missing LICENSE file (John Frickson)
* Off-by-one BO in my_system() (John Frickson)
* Got rid of some compiler warnings (Stefan Krüger / John Frickson)
* Add SOURCE_DATE_EPOCH specification support for reproducible builds. (Bas Couwenberg)
* nrpe 3.0.1 allows TLSv1 and TLSv1.1 when I configure for TLSv1.2+ (John Frickson)
* "Remote %s accepted a Version %s Packet", please add to debug (John Frickson)
* nrpe 3.0.1 segfaults when key and/or cert are broken symlinks (John Frickson)
* Fixed a couple of typos in docs/NRPE.* files (Ludmil Meltchev)
* Changed release date to ISO format (yyyy-mm-dd) (John Frickson)
* Fix systemd unit description (Bas Couwenberg)
* Add reload command to systemd service file (Bas Couwenberg)
* fix file not found error when updating version (Sven Nierlein)
* Spelling fixes (Josh Soref)
* Return UNKNOWN when check_nrpe cannot communicate with nrpe and -u set (John Frickson)
* xinetd.d parameter causes many messages in log file (John Frickson)
* Fixes for openssl 1.1.x (Stephen Smoogen / John Frickson)
* PATH and other environment variables not set with numeric nrpe_user (John Frickson)
* rpmbuild -ta nrpe-3.0.1.tar.gz failed File not found: /etc/init.d/nrpe (bvandi / John Frickson)
[3.0.1](https://github.com/NagiosEnterprises/nrpe/releases/tag/nrpe-3.0.1) - 2016-09-08
---------------------------------------------------------------------------------------
**FIXES**
* _set_rc: command not found reported by init script (John Frickson)
* Version string contains name (John Frickson)
* Changes to get 'rpmbuild' to work - nrpe.spec file outdated (John Frickson)
* typo in startup/default-xinetd.in (Philippe Kueck)
* debug output missing command name (Philippe Kueck)
* /usr/lib/tmpfiles.d/ndo2db.conf should have 'd' type, not 'D' (John Frickson)
* Fixes in parse_allowed_hosts() and called functions (Jobst Schmalenbach / John Frickson)
* nrpe.cfg: 'debug' statement needs to be first in file (Jobst Schmalenbach / John Frickson)
[3.0.0](https://github.com/NagiosEnterprises/nrpe/releases/tag/nrpe-3.0.0) - 2016-08-01
---------------------------------------------------------------------------------------
**SECURITY**
* Fix for CVE-2014-2913
* Added function to clean the environment before forking. (John Frickson)
**ENHANCEMENTS**
* Added support for optional config file to check_nrpe. With the new SSL
parameters, the line was getting long. The config file is specified with
--config-file=<path> or -f <path> parameters. The config file must look
like command line options, but the options can be on separate lines. It
MUST NOT include --config-file (-f), --command (-c) or --args (-a). If any
options are in both the config file and on the command line, the command line
options are used.
* make can now add users and groups using "make install-groups-users" (John Frickson)
* Added "nrpe-uninstall" script to the same directory nrpe get installed to (John Frickson)
* Updated code so configure && make will work on AIX, HP-UX, Solaris, OS X.
There should be no errors or warnings. Let me know if any errors or
warning appear (John Frickson)
* Added command-line option to prevent forking, since some of the init
replacements (such as systemd, etc.) don't want daemons to fork (John Frickson)
* Added autoconf macros and additional files to better support multi-platform
config and compile. The default will still set up to install to
/usr/local/nagios but I added a new configure option:
'--enable-install-method=<method>'. If <method> is 'opt', everything will
install to '/opt/nagios'. If <method> is 'os', installation will be to O/S-
and distribution-specific locations, such as /usr/sbin, /usr/lib/nagios,
/etc/nagios, and so on.
* Added additional init and inetd config files to support more systems,
including SuSE, Debian, Slackware, Gentoo, *BSD, AIX, HP-UX, Solaris, OS X.
* Added listen_queue_size as configuration option (Vadim Antipov, Kaspersky Lab)
* Reworked SSL/TLS. See the README.SSL.md file for full info. (John Frickson)
* Added support for version 3 variable sized packets up to 64KB. nrpe will
accept either version from check_nrpe. check_nrpe will try to send a
version 3 packet first, and fall back to version 2. check_nrpe can be forced
to only send version 2 packets if the switch `-2` is used. (John Frickson)
* Added extended timeout syntax in the -t <secs>:<status> format. (ABrist)
**FIXES**
* Fixed configure to check more places for SSL headers/libs. (John Frickson)
* Added ifdefs for complete_SSL_shutdown to compile without SSL. (Matthew L. Daniel)
* Renamed configure.in to configure.ac and added check for sigaction (John Frickson)
* Replaced all instances of signal() with sigaction() + blocking (John Frickson)
* check_nrpe does not parse passed arguments correctly (John Frickson)
* NRPE should not start if cannot write pid file (John Frickson)
* Fixed out-of-bounds error (return code 255) for some failures (John Frickson)
* Connection Timeout and Connection Refused messages need a new line (Andrew Widdersheim)
* allowed_hosts doesn't work, if one of the hostnames can't be resolved by dns (John Frickson)
* allowed_hosts doesn't work with a hostname resolving to an IPv6 address (John Frickson)
* Return UNKNOWN when issues occur (Andrew Widdersheim)
* NRPE returns OK if check can't be executed (Andrew Widdersheim)
* nrpe 2.15 [regression in Added SRC support on AIX - 2.14] (frphoebus)
* compile nrpe - Solaris 9 doesn't have isblank() (lilo, John Frickson)
* sample configuration for check_load has crazy sample load avg (ernestoongaro)
2.15 - 09/06/2013
-----------------
* Now compiles on HP-UX (Grant Byers)
* Added support for IPv6 (Leo Baltus, Eric Stanley)
2.14 - 12/21/2012
-----------------
* Added configure option to allow bash command substitutions, disabled by default [bug #400] (Eric Stanley)
* Patched to shutdown SSL connection completely (Jari Takkala)
* Added SRC support on AIX (Thierry Bertaud)
* Updated RPM SPEC file to support creating RPMs on AIX (Eric Stanley)
* Updated logging to support compiling on AIX (Eric Stanley)
2.15 - 09/06/2013
-----------------
- Now compiles on HP-UX (Grant Byers)
- Added support for IPv6 (Leo Baltus, Eric Stanley)
2.14 - 12/21/2012
-----------------
- Added configure option to allow bash command substitutions, disabled by default [bug #400] (Eric Stanley)
- Patched to shutdown SSL connection completely (Jari Takkala)
- Added SRC support on AIX (Thierry Bertaud)
- Updated RPM SPEC file to support creating RPMs on AIX (Eric Stanley)
- Updated logging to support compiling on AIX (Eric Stanley)
2.13 - 11/11/2011
-----------------
- Applied Kaspersky Labs supplied patch for extending allowed_hosts (Konstantin Malov)
- Fixed bug in allowed_hosts parsing (Eric Stanley)
- Updated to support compiling on Solaris 10 (thanks to Kevin Pendleton)
Do it for all packages that
* mention perl, or
* have a directory name starting with p5-*, or
* depend on a package starting with p5-
like last time, for 5.18, where this didn't lead to complaints.
Let me know if you have any this time.
a) refer 'perl' in their Makefile, or
b) have a directory name of p5-*, or
c) have any dependency on any p5-* package
Like last time, where this caused no complaints.
See options.mk, in the case without options nagios-nrpe-args:
# Upstream's configure enables command args when given
# "--disable-command-args", so (departing from pkgsrc norms) don't
# give the --disable option.
PKGREVISION++; the previous version enabled command args when it
should not have.
This option passes -enable-command-args to configure, and is intended
to allow the use of arguments to nrpe. From Brian A. Seklecki via PR
pkg/43920.
However, configure.in seems broken, and it seems command args are
always enabled.
addition to the existing --with-nrpe-user and --with-nrpe-group. We use
${NAGIOS_USER} and ${NAGIOS_GROUP} for both nagious user/group and nrpe
user/group.
Changes in 2.12:
* Fix for unterminated multiline plugin (garbage) output.
Changes in 2.11:
* Added lib64 library paths to configure script for 64-bit systems.
* Added --with-ssl-lib configure script option.
* Added --with-log-facility option to control syslog logging.
Changes in 2.10:
* Moved PDF docs to docs/ subdirectory, added OpenOffice source document.
* A critical result is now returned for child processed that die due to a
signal.
Changes in 2.9:
* Fixed bug with --with-nrpe-group configure script option.
* Fixed bug with check_disk thresholds in sample config file.
* Added NRPE_PROGRAMVERSION and NRPE_MULTILINESUPPORT environment variables
for scripts that need to detect NRPE version and capabilities.
* Added asprintf() support for systems that are missing it.
Changes in 2.8.1:
* Fixed configure script error with user-specified NRPE group.
Changes in 2.8:
* Added support for multiline plugin output (limited to 1KB at the moment).
* Changes to sample config files.
* Added ';' as an additional prohibited metachar for command arguments.
* Updated documentation and added easier installation commands.
Changes in 2.7.1:
* Changed C++ style comment to C style to fix compilation errors on AIX.
Changes in 2.7:
* Patches for detection SSL header and library locations.
* NRPE daemon will now partially ignore non-fatal configuration file errors
and attempt to startup.
Changes in 2.6:
* Added -u option to check_nrpe to return UNKNOWN states on socket timeouts.
* Added connection_timeout variable to NRPE daemon to catch dead client
connections.
* Added graceful timeout to check_nrpe to ensure connection to NRPE daemon
is properly closed.
the owner of all installed files is a non-root user. This change
affects most packages that require special users or groups by making
them use the specified unprivileged user and group instead.
(1) Add two new variables PKG_GROUPS_VARS and PKG_USERS_VARS to
unprivileged.mk. These two variables are lists of other bmake
variables that define package-specific users and groups. Packages
that have user-settable variables for users and groups, e.g. apache
and APACHE_{USER,GROUP}, courier-mta and COURIER_{USER,GROUP},
etc., should list these variables in PKG_USERS_VARS and PKG_GROUPS_VARS
so that unprivileged.mk can know to set them to ${UNPRIVILEGED_USER}
and ${UNPRIVILEGED_GROUP}.
(2) Modify packages to use PKG_GROUPS_VARS and PKG_USERS_VARS.
**************
NRPE Changelog
**************
2.5.2 - 06/30/2006
------------------
- Fixed incorrect service name in sample xinetd config file
- Added note on how to restart inetd for OpenBSD users (Robert Peaslee)
- Fix for nonblocking accept()s on systems that define EAGAIN differently than EWOULDBLOCK (Gerhard Lausser)
- Fix to (re)allow week random seed (Gerhard Lausser)
specified in additional variables, i.e. PKG_GECOS, PKG_HOME, PKG_SHELL,
etc., as stated in both the pkgsrc guide and the pkginstall.mk comments
since 2006/04/23, or one month before this package was imported.
