pkglint -r --network --only "migrate"
As a side-effect of migrating the homepages, pkglint also fixed a few
indentations in unrelated lines. These and the new homepages have been
checked manually.
pkgsrc changes:
---------------
* add patch to disable bpf_aux_data on NetBSD (defined in
/usr/include/net/bpf.h).
upstream changes:
-----------------
Summary for 1.9.1 libpcap release
Mention pcap_get_required_select_timeout() in the main pcap man page
Fix pcap-usb-linux.c build on systems with musl
Fix assorted man page and other documentation issues
Plug assorted memory leaks
Documentation changes to use https:
Changes to how time stamp calculations are done
Lots of tweaks to make newer compilers happier and warning-free and
to fix instances of C undefined behavior
Warn if AC_PROG_CC_C99 can't enable C99 support
Rename pcap_set_protocol() to pcap_set_protocol_linux().
Align pcap_t private data on an 8-byte boundary.
Fix various error messages
Use 64-bit clean API in dag_findalldevs()
Fix cleaning up after some errors
Work around some ethtool ioctl bugs in newer Linux kernels (GitHub
issue #689)
Add backwards compatibility sections to some man pages (GitHub issue
#745)
Fix autotool configuration on AIX and macOS
Don't export bpf_filter_with_aux_data() or struct bpf_aux_data;
they're internal-only and subject to change
Fix pcapng block size checking
On macOS, don't build rpcapd or test programs any fatter than they
need to be
Fix reading of capture statistics for Linux USB
Fix packet size values for Linux USB packets (GitHub issue #808)
Check only VID in VLAN test in filterss (GitHub issue #461)
Fix pcap_list_datalinks on 802.11 devices on macOS
Fix overflows with very large snapshot length in pcap file
Improve parsing of rpcapd configuration file (GitHub issue #767)
Handle systems without strlcpy() or strlcat() better
Fix crashes and other errors with invalid filter expressions
Fix use of uninitialized file descriptor in remote capture
Fix some CMake issues
Fix some divide-by-zero issues with the filter compiler
Work around a GNU libc bug in pcap_nametonetaddr()
Add support for DLT_LINUX_SLL2
Fix handling of the packet-count argument for Myricom SNF devices
Fix --disable-rdma in configure script (GitHub issue #782)
Fix compilation of TurboCap support (GitHub issue #764)
Constify first argument to pcap_findalldevs_ex()
Fix a number of issues when running rpcapd as an inetd-style daemon
Fix CMake issues with D-Bus libraries
In rpcapd, clean up termination of a capture session
Redo remote capture protocol negotiation
In rpcapd, report the same error for "invalid user name" and
"invalid password", to make brute-forcing harder
For remote captures, add an error code for "the server requires TLS"
Fix pcap_dump_fopen() on Windows to avoid clashes between
{Win,N}Pcap and application C runtimes
Fix exporting of functions from Windows DLLs (GitHub issue #810)
Fix building as part of Npcap
Allow rpcapd to rebind more rapidly
Fix building shared libpcap library on midipix (midipix.org)
Fix hack to detect UTF-16LE adapter names on Windows not to go past
the end of the string
Fix handling of "wireless WAN" (mobile phone network modems) on
Windows with WinPcap/Npcap (GitHub issue #824)
Have pcap_dump_open_append() create the dump file if it doesn't
exists (GitHub issue #247)
Fix the maxmum snapshot length for DLT_USBPCAP
Use -fPIC when building for 64-bit SPARC on Linux (GitHub issue #837)
Fix CMake 64-bit library installation directory on some Linux
distributions
Boost the TPACKET_V3 timeout to the maximum if a timeout of 0 was
specified
Five CVE-2019-15161, CVE-2019-15162, CVE-2019-15163, CVE-2019-15164, CVE-2019-15165
Fixes for CVE-2018-16301, errors in pcapng reading.
PCAPNG reader applies some sanity checks before doing malloc().
Summary for 1.9.0 libpcap release
Added testing system to libpcap, independent of tcpdump
Changes to how pcap_t is activated
Adding support for Large stream buffers on Endace DAG cards
Changes to BSD 3-clause license to 2-clause licence
Additions to TCP header parsing, per RFC3168
Add CMake build process (extensive number of changes)
Assign a value for OpenBSD DLT_OPENFLOW.
Support setting non-blocking mode before activating.
Extensive build support for Windows VS2010 and MINGW (many many changes, over many months)
Added RPCAPD support when --enable-remote (default no)
Add the rpcap daemon source and build instructions.
Put back the greasy "save the capture filter string so we can tweak it"
hack, that keeps libpcap from capturing rpcap traffic.
Fixes for captures on MacOS, utun0
fixes so that non-AF_INET addresses, are not ==AF_INET6 addresses.
Add a linktype for IBM SDLC frames containing SNA PDUs.
pcap_compile() in 1.8.0 and later is newly thread-safe.
bound snaplen for linux tpacket_v2 to ~64k
Make VLAN filter handle both metadata and inline tags
D-Bus captures can now be up to 128MB in size
Added LORATAP DLT value
Added DLT_VSOCK for http://qemu-project.org/Features/VirtioVsock
probe_devices() fixes not to overrun buffer for name of device
Add linux-specific pcap_set_protocol_linux() to allow specifying a specific capture protocol.
RDMA sniffing support for pcap
Add Nordic Semiconductor Bluetooth LE sniffer link-layer header type.
fixes for reading /etc/ethers
Make it possible to build on Windows without packet.dll.
Add tests for large file support on UN*X.
Solaris fixes to work with 2.8.6
configuration test now looks for header files, not capture devices present
Fix to work with Berkeley YACC.
fixes for DragonBSD compilation of pcap-netmap.c
Clean up the ether_hostton() stuff.
Add an option to disable Linux memory-mapped capture support.
Add DAG API support checks.
Add Septel, Myricom SNF, and Riverbed TurboCap checks.
Add checks for Linux USB, Linux Bluetooth, D-Bus, and RDMA sniffing support.
Add a check for hardware time stamping on Linux.
Don't bother supporting pre-2005 Visual Studio.
Increased minimum autoconf version requirement to 2.64
Add DLT value 273 for XRA-31 sniffer
Clean up handing of signal interrupts in pcap_read_nocb_remote().
Use the XPG 4.2 versions of the networking APIs in Solaris.
Fix, and better explain, the "IPv6 means IPv6, not IPv4" option setting.
Explicitly warn that negative packet buffer timeouts should not be used.
rpcapd: Add support inetd-likes, including xinetd.conf, and systemd units
Rename DLT_IEEE802_15_4 to DLT_IEEE802_15_4_WITHFCS.
Add DISPLAYPORT AUX link type
Remove the sunos4 kernel modules and all references to them.
Add more interface flags to pcap_findalldevs().
Tuesday, Oct. 25, 2016 mcr@sandelman.ca
Summary for 1.8.1 libpcap release
Add a target in Makefile.in for Exuberant Ctags use: 'extags'.
Rename configure.in to configure.ac: autoconf 2.59
Clean up the name-to-DLT mapping table.
Add some newer DLT_ values: IPMI_HPM_2,ZWAVE_R1_R2,ZWAVE_R3,WATTSTOPPER_DLM,ISO_14443,RDS
Clarify what the return values are for both success and failure.
Many changes to build on windows
Check for the "break the loop" condition in the inner loop for TPACKET_V3.
Fix handling of packet count in the TPACKET_V3 inner loop: GitHub issue #493.
Filter out duplicate looped back CAN frames.
Fix the handling of loopback filters for IPv6 packets.
Add a link-layer header type for RDS (IEC 62106) groups.
Use different intermediate folders for x86 and x64 builds on Windows.
On Linux, handle all CAN captures with pcap-linux.c, in cooked mode.
Removes the need for the "host-endian" link-layer header type.
Compile with '-Wused-but-marked-unused' in devel mode if supported
Have separate DLTs for big-endian and host-endian SocketCAN headers.
Reflect version.h being renamed to pcap_version.h.
Require that version.h be generated: all build procedures we support generate version.h (autoconf, CMake, MSVC)!
Properly check for sock_recv() errors.
Re-impose some of Winsock's limitations on sock_recv().
Replace sprintf() with pcap_snprintf().
Fix signature of pcap_stats_ex_remote().
Initial cmake support for remote packet capture.
Have rpcap_remoteact_getsock() return a SOCKET and supply an "is active" flag.
Clean up {DAG, Septel, Myricom SNF}-only builds.
Do UTF-16-to-ASCII conversion into the right place.
pcap_create_interface() needs the interface name on Linux.
Clean up hardware time stamp support: the "any" device does not support any time stamp types.
Add support for capturing on FreeBSD usbusN interfaces.
Add a LINKTYPE/DLT_ value for FreeBSD USB.
Go back to using PCAP_API on Windows.
CMake support
Add TurboCap support from WinPcap.
Recognize 802.1ad nested VLAN tag in vlan filter.
Thursday Sep. 3, 2015 guy@alum.mit.edu
Summary for 1.7.5 libpcap release
Man page cleanups.
Add some allocation failure checks.
Fix a number of Linux/ucLinux configure/build issues.
Fix some memory leaks.
Recognize 802.1ad nested VLAN tag in vlan filter.
Fix building Bluetooth Linux Monitor support with BlueZ 5.1+
Summary for 1.7.2 libpcap release
Support for filtering Geneve encapsulated packets.
Wednesday Nov. 12, 2014 guy@alum.mit.edu/mcr@sandelman.ca
Summary for 1.7.0 libpcap release
Fix handling of zones for BPF on Solaris
new DLT for ZWAVE
clarifications for read timeouts.
added bpf_filter1() with extensions
some fixes to compilation without stdint.h
EBUSY can now be returned by SNFv3 code.
Monday Aug. 12, 2014 guy@alum.mit.edu
Summary for 1.6.2 libpcap release
Don't crash on filters testing a non-existent link-layer type
field.
Fix sending in non-blocking mode on Linux with memory-mapped
capture.
Fix timestamps when reading pcap-ng files on big-endian
machines.
Saturday Jul. 19, 2014 mcr@sandelman.ca
Summary for 1.6.1 libpcap release
some fixes for the any device
changes for how --enable-XXX (--enable-sniffing, --enable-can) works
Wednesday Jul. 2, 2014 mcr@sandelman.ca
Summary for 1.6.0 libpcap release
Don't support D-Bus sniffing on OS X
fixes for byte order issues with NFLOG captures
Handle using cooked mode for DLT_NETLINK in activate_new().
on platforms where you can not capture on down interfaces, do not list them
but: do list interfaces which are down, if you can capture on them!
Wednesday December 18, 2013 guy@alum.mit.edu
Summary for 1.5.3 libpcap release
Don't let packets that don't match the current filter get to the
application when TPACKET_V3 is used. (GitHub issue #331)
Fix handling of pcap_loop()/pcap_dispatch() with a packet count
of 0 on some platforms (including Linux with TPACKET_V3).
(GitHub issue #333)
Work around TPACKET_V3 deficiency that causes packets to be lost
when a timeout of 0 is specified. (GitHub issue #335)
Man page formatting fixes.
Wednesday December 4, 2013 guy@alum.mit.edu
Summary for 1.5.2 libpcap release
Fix libpcap to work when compiled with TPACKET_V3 support and
running on a kernel without TPACKET_V3 support. (GitHub
issue #329)
Wednesday November 20, 2013 guy@alum.mit.edu
Summary for 1.5.1 libpcap release
Report an error, rather than crashing, if an IPv6 address is
used for link-layer filtering. (Wireshark bug 9376)
Wednesday October 30, 2013 guy@alum.mit.edu
Summary for 1.5.0 libpcap release
TPACKET_V3 support added for Linux
Point users to the the-tcpdump-group repository on GitHub rather
than the mcr repository
Checks added for malloc()/realloc()/etc. failures
Fixed build on Solaris 11
Support filtering filtering E1 SS7 traffic on MTP2 layer Annex A
Use "ln -s" to link man pages by default
Add support for getting nanosecond-resolution time stamps when
capturing and reading capture files
Many changes to autoconf to deal better with non-GCC compilers
added many new DLT types
Remove bogus removal of dlpisubs.c, and force the configure script to
avoid any getifaddrs implementation on SunOS which would result in it
not being included.
Fixes build on SunOS. Thanks to Jörn Clausen for testing on Solaris 10.
Bump PKGREVISION. Approved during freeze by wiz.
Add netfilter/nfqueue interface.
If we don't have support for IPv6 address resolution, support,
in filter expressions, what IPv6 stuff we can.
Checks added for malloc()/realloc()/etc. failures.
Fix pcap-config to include -lpthread if canusb support is
present
Try to fix "pcap_parse not defined" problems when --without-flex
and --without-bison are used when you have Flex and Bison
Fix some issues with the pcap_loop man page.
Fix pcap_getnonblock() and pcap_setnonblock() to fill in the
supplied error message buffer
Fix typo that, it appeared, would cause pcap-libdlpi.c not to
compile (perhaps systems with libdlpi also have BPF and use
that instead)
Catch attempts to call pcap_compile() on a non-activated pcap_t
Fix crash on Linux with CAN-USB support without usbfs
Fix addition of VLAN tags for Linux cooked captures
Check for both EOPNOTSUPP and EINVAL after SIOCETHTOOL ioctl, so
that the driver can report either one if it doesn't support
SIOCETHTOOL
Add DLT_INFINIBAND and DLT_SCTP
Describe "proto XXX" and "protochain XXX" in the pcap-filter man
page
Handle either directories, or symlinks to directories, that
correspond to interfaces in /sys/class/net
Fix handling of VLAN tag insertion to check, on Linux 3.x
kernels, for VLAN tag valid flag
Clean up some man pages
Support libnl3 as well as libnl1 and libnl2 on Linux
it will fallback to "yacc" (instead of "bison") and the library will
not link properly. This problem is probably only visible under Solaris
where "lex" is not "flex".
Bump package revision because of this fix.
Summary for 1.3.0 libpcap release
Handle DLT_PFSYNC in {FreeBSD, other *BSD+Mac OS X, other}.
Linux: Don't fail if netfilter isn't enabled in the kernel.
Add new link-layer type for NFC Forum LLCP.
Put the CANUSB stuff into EXTRA_DIST, so it shows up in the release tarball.
Add LINKTYPE_NG40/DLT_NG40.
Add DLT_MPEG_2_TS/LINKTYPE_MPEG_2_TS for MPEG-2 transport streams.
[PATCH] Fix AIX-3.5 crash with read failure during stress
AIX fixes.
Introduce --disable-shared configure option.
Added initial support for canusb devices.
Include the pcap(3PCAP) additions as 1.2.1 changes.
many updates to documentation: pcap.3pcap.in
Improve 'inbound'/'outbound' capture filters under Linux.
Note the cleanup of handling of new DLT_/LINKTYPE_ values.
On Lion, don't build for PPC.
For mac80211 devices we need to clean up monitor mode on exit.
Summary for 1.2.1 libpcap release
Update README file.
Fix typoes in README.linux file.
Clean up some compiler warnings.
Fix Linux compile problems and tests for ethtool.h.
Treat Debian/kFreeBSD and GNU/Hurd as systems with GNU
toolchains.
Support 802.1 QinQ as a form of VLAN in filters.
Treat "carp" as equivalent to "vrrp" in filters.
Fix code generated for "ip6 protochain".
Add some new link-layer header types.
Support capturing NetFilter log messages on Linux.
Clean up some error messages.
Turn off monitor mode on exit for mac80211 interfaces on Linux.
Fix problems turning monitor mode on for non-mac80211 interfaces
on Linux.
Properly fail if /sys/class/net or /proc/net/dev exist but can't
be opened.
Fail if pcap_activate() is called on an already-activated
pcap_t, and add a test program for that.
Fix filtering in pcap-ng files.
Don't build for PowerPC on Mac OS X Lion.
Simplify handling of new DLT_/LINKTYPE_ values.
Expand pcap(3PCAP) man page.
Summary for 1.2 libpcap release
All of the changes listed below for 1.1.1 and 1.1.2.
Changes to error handling for pcap_findalldevs().
Fix the calculation of the frame size in memory-mapped captures.
Add a link-layer header type for STANAG 5066 D_PDUs.
Add a link-layer type for a variant of 3GPP TS 27.010.
Noted real nature of LINKTYPE_ARCNET.
Add a link-layer type for DVB-CI.
Fix configure-script discovery of VLAN acceleration support.
see http://netoptimizer.blogspot.com/2010/09/tcpdump-vs-vlan-tags.html
Linux, HP-UX, AIX, NetBSD and OpenBSD compilation/conflict fixes.
Protect against including AIX 5.x's <net/bpf.h> having been included.
Add DLT_DBUS, for raw D-Bus messages.
Treat either EPERM or EACCES as "no soup for you".
Changes to permissions on DLPI systems.
Add DLT_IEEE802_15_4_NOFCS for 802.15.4 interfaces.
* Fix build on RHEL5.
* Fix shared library build on AIX.
Changes 1.1.0:
* Add SocketCAN capture support
* Add Myricom SNF API support
* Update Endace DAG and ERF support
* Add support for shared libraries on Solaris, HP-UX, and AIX
* Build, install, and un-install shared libraries by default;
don't build/install shared libraries on platforms we don't support
* Fix building from a directory other than the source directory
* Fix compiler warnings and builds on some platforms
* Update config.guess and config.sub
* Support monitor mode on mac80211 devices on Linux
* Fix USB memory-mapped capturing on Linux; it requires a new DLT_
value
* On Linux, scan /sys/class/net for devices if we have it; scan
it, or /proc/net/dev if we don't have /sys/class/net, even if
we have getifaddrs(), as it'll find interfaces with no
addresses
* Add limited support for reading pcap-ng files
* Fix BPF driver-loading error handling on AIX
* Support getting the full-length interface description on FreeBSD
* In the lexical analyzer, free up any addrinfo structure we got back
from getaddrinfo().
* Add support for BPF and libdlpi in OpenSolaris (and SXCE)
* Hyphenate "link-layer" everywhere
* Add /sys/kernel/debug/usb/usbmon to the list of usbmon locations
* In pcap_read_linux_mmap(), if there are no frames available, call
poll() even if we're in non-blocking mode, so we pick up
errors, and check for the errors in question.
* Note that poll() works on BPF devices is Snow Leopard
* If an ENXIO or ENETDOWN is received, it may mean the device has
gone away. Deal with it.
* For BPF, raise the default capture buffer size to from 32k to 512k
* Support ps_ifdrop on Linux
* Added a bunch of #ifdef directives to make wpcap.dll (WinPcap) compile
under cygwin.
* Changes to Linux mmapped captures.
* Fix bug where create_ring would fail for particular snaplen and
buffer size combinations
* Update pcap-config so that it handles libpcap requiring
additional libraries
* Add workaround for threadsafeness on Windows
* Add missing mapping for DLT_ENC <-> LINKTYPE_ENC
* DLT: Add DLT_CAN_SOCKETCAN
* DLT: Add Solaris ipnet
* Don't check for DLT_IPNET if it's not defined
* Add link-layer types for Fibre Channel FC-2
* Add link-layer types for Wireless HART
* Add link-layer types for AOS
* Add link-layer types for DECT
* Autoconf fixes (AIX, HP-UX, OSF/1, Tru64 cleanups)
* Install headers unconditionally, and include vlan.h/bluetooth.h if
enabled
* Autoconf fixes+cleanup
This changes the buildlink3.mk files to use an include guard for the
recursive include. The use of BUILDLINK_DEPTH, BUILDLINK_DEPENDS,
BUILDLINK_PACKAGES and BUILDLINK_ORDER is handled by a single new
variable BUILDLINK_TREE. Each buildlink3.mk file adds a pair of
enter/exit marker, which can be used to reconstruct the tree and
to determine first level includes. Avoiding := for large variables
(BUILDLINK_ORDER) speeds up parse time as += has linear complexity.
The include guard reduces system time by avoiding reading files over and
over again. For complex packages this reduces both %user and %sys time to
half of the former time.
* Compile with IPv6 support by default
* Compile with large file support on by default
* Add pcap-config script, which deals with -I/-L flags for compiling
* DLT: Add IPMB
* DLT: Add LAPD
* DLT: Add AX25 (AX.25 w/KISS header)
* DLT: Add JUNIPER_ST
* 802.15.4 support
* Variable length 802.11 header support
* X2E data type support
* SITA ACN Interface support - see README.sita
* Support for zerocopy BPF on platforms that support it
* Better support for dealing with VLAN tagging/stripping on Linux
* Fix dynamic library support on OSX
* Change build process to put public libpcap headers into pcap subir
* DLT: Add value for IPMI IPMB packets
* DLT: Add value for u10 Networks boards
* Require <net/pfvar.h> for pf definitions - allows reading of pflog formatted
libpcap files on an OS other than where the file was generated
libpcap
Wed. July 23, 2007. mcr@xelerance.com. Summary for 0.9.7 libpcap release
FIXED version file to be 0.9.7 instead of 0.9.5.
added flags/configuration for cloning bpf device.
added DLT_MTP2_WITH_PHDR support (PPI)
"fix" the "memory leak" in icode_to_fcode() -- documentation bug
Various link-layer types, with a pseudo-header, for SITA http://www.sita.aero/
introduces support for the DAG ERF type TYPE_COLOR_MC_HDLC_POS.
Basic BPF filtering support for DLT_MTP2_WITH_PHDR is also added.
check for IPv4 and IPv6, even for DLT_RAW
add support for DLT_JUNIPER_ISM
Pick up changes from NetBSD: many from tron, christos, drochner
Allocate DLT_ for 802.15.4 without any header munging, for Mikko Saarnivala.
Header for 802.16 MAC Common Part Sublayer plus a radiotap radio header
Wed. April 25, 2007. ken@xelerance.com. Summary for 0.9.6 libpcap release
Put the public libpcap headers into a pcap subdirectory in both the
source directory and the target include directory, and have include
files at the top-level directory to include those headers, for
backwards compatibility.
Add Bluetooth support
Add USB capturing support on Linux
Add support for the binary USB sniffing interface in Linux
Add support for new FreeBSD BIOCSDIRECTION ioctl
Add additional filter operations for 802.11 frame types
Add support for filtering on MTP2 frame types
Propagate some changes from the main branch, so the x.9 branch has
all the DLT_ and LINKTYPE_ values that the main branch does
Reserved a DLT_ and SAVEFILE_ value for PPI (Per Packet Info)
encapsulated packets
Add LINKTYPE_ for IEEE 802.15.4, with address fields padded as done
by Linux drivers
Add LINKTYPE_ value corresponding to DLT_IEEE802_16_MAC_CPS.
Add DLT for IEEE 802.16 (WiMAX) MAC Common Part Sublayer
Add DLT for Bluetooth HCI UART transport layer
When building a shared library, build with "-fPIC" on Linux to support x86_64
Link with "$(CC) -shared" rather than "ld -shared" when building a
".so" shared library
Add support for autoconf 2.60
Fixes to discard unread packets when changing filters
Changes to handle name changes in the DAG library resulting from
switching to libtool.
Add support for new DAG ERF types.
Add an explicit "-ldag" when building the shared library, so the DAG
library dependency is explicit.
Mac OSX fixes for dealing with "wlt" devices
Fixes in add_or_find_if() & pcap_findalldevs() to optimize generating
device lists
Fixed a bug in pcap_open_live(). The return value of PacketSetHwFilter
was not checked.
Fix compiling on AIX (, at end of ENUM)
Updated list of DNS RR typecodes
Use local Ethernet defs on WIN32
Add support for Frame-Relay ARP
Fixes for compiling under MSVC++
Add support for parsing Juniper .pcap files
Add support for FRF.16 Multilink Frame-Relay (DLT_MFR)
Rework the OSPFv3 printer
Fix printing for 4.4BSD/NetBSD NFS Filehandles
Add support for Cisco style NLPID encapsulation
Add cisco prop. eigrp related, extended communities
Add support for BGP signaled VPLS
Cleanup the bootp printer
Add support for PPP over Frame-Relay
Add some bounds checking to the IP options code, and clean up
the options output a bit.
Add additional modp groups to ISAKMP printer
Add support for Address-Withdraw and Label-Withdraw Msgs
Add support for the BFD Discriminator TLV
Fixes for 64bit compiling
Add support for PIMv2 checksum verification
Add support for further dissection of the IPCP Compression Option
Add support for Cisco's proposed VQP protocol
Add basic support for keyed authentication TCP option
Lots of minor cosmetic changes to output printers
and add a new helper target and script, "show-buildlink3", that outputs
a listing of the buildlink3.mk files included as well as the depth at
which they are included.
For example, "make show-buildlink3" in fonts/Xft2 displays:
zlib
fontconfig
iconv
zlib
freetype2
expat
freetype2
Xrender
renderproto
RECOMMENDED is removed. It becomes ABI_DEPENDS.
BUILDLINK_RECOMMENDED.foo becomes BUILDLINK_ABI_DEPENDS.foo.
BUILDLINK_DEPENDS.foo becomes BUILDLINK_API_DEPENDS.foo.
BUILDLINK_DEPENDS does not change.
IGNORE_RECOMMENDED (which defaulted to "no") becomes USE_ABI_DEPENDS
which defaults to "yes".
Added to obsolete.mk checking for IGNORE_RECOMMENDED.
I did not manually go through and fix any aesthetic tab/spacing issues.
I have tested the above patch on DragonFly building and packaging
subversion and pkglint and their many dependencies.
I have also tested USE_ABI_DEPENDS=no on my NetBSD workstation (where I
have used IGNORE_RECOMMENDED for a long time). I have been an active user
of IGNORE_RECOMMENDED since it was available.
As suggested, I removed the documentation sentences suggesting bumping for
"security" issues.
As discussed on tech-pkg.
I will commit to revbump, pkglint, pkg_install, createbuildlink separately.
Note that if you use wip, it will fail! I will commit to pkgsrc-wip
later (within day).
