MASTER_SITES= site1 \
site2
style continuation lines to be simple repeated
MASTER_SITES+= site1
MASTER_SITES+= site2
lines. As previewed on tech-pkg. With thanks to rillig for fixing pkglint
accordingly.
Problems found with existing digests:
Package memconf distfile memconf-2.16/memconf.gz
b6f4b736cac388dddc5070670351cf7262aba048 [recorded]
95748686a5ad8144232f4d4abc9bf052721a196f [calculated]
Problems found locating distfiles:
Package dc-tools: missing distfile dc-tools/abs0-dc-burn-netbsd-1.5-0-gae55ec9
Package ipw-firmware: missing distfile ipw2100-fw-1.2.tgz
Package iwi-firmware: missing distfile ipw2200-fw-2.3.tgz
Package nvnet: missing distfile nvnet-netbsd-src-20050620.tgz
Package syslog-ng: missing distfile syslog-ng-3.7.2.tar.gz
Otherwise, existing SHA1 digests verified and found to be the same on
the machine holding the existing distfiles (morden). All existing
SHA1 digests retained for now as an audit trail.
or USE_X11BASE set, but don't include mk/x11.buildlink3.mk directly or
via buildlink3.mks
- introduce BUILDLINK_PREFIX.libXpm as alias for BUILDLINK_PREFIX.xpm
in the !modular case
- fix some cases where the check for libX11 couldn't work at all by using
C++ for compilation without including the proper headers
Verified using a full X11_TYPE=xorg bulk build without additional
breakage. Discussed with salo@, wiz@ and send to packages@ for feedback.
packages with the modular Xorg equivalent. Those are falling back
to the old location by default, so this commmit doesn't change
dependencies.
graphics/xpm ==> x11/libXpm
fonts/Xft2 ==> x11/libXft
x11/Xfixes ==> x11/libXfixes
x11/xcursor ==> x11/libXcursor
x11/Xrender ==> x11/libXrender
x11/Xrandr ==> libXrandr
developer is officially maintaining the package.
The rationale for changing this from "tech-pkg" to "pkgsrc-users" is
that it implies that any user can try to maintain the package (by
submitting patches to the mailing list). Since the folks most likely
to care about the package are the folks that want to use it or are
already using it, this would leverage the energy of users who aren't
developers.
Several changes are involved since they are all interrelated. These
changes affect about 1000 files.
The first major change is rewriting bsd.builtin.mk as well as all of
the builtin.mk files to follow the new example in bsd.builtin.mk.
The loop to include all of the builtin.mk files needed by the package
is moved from bsd.builtin.mk and into bsd.buildlink3.mk. bsd.builtin.mk
is now included by each of the individual builtin.mk files and provides
some common logic for all of the builtin.mk files. Currently, this
includes the computation for whether the native or pkgsrc version of
the package is preferred. This causes USE_BUILTIN.* to be correctly
set when one builtin.mk file includes another.
The second major change is teach the builtin.mk files to consider
files under ${LOCALBASE} to be from pkgsrc-controlled packages. Most
of the builtin.mk files test for the presence of built-in software by
checking for the existence of certain files, e.g. <pthread.h>, and we
now assume that if that file is under ${LOCALBASE}, then it must be
from pkgsrc. This modification is a nod toward LOCALBASE=/usr. The
exceptions to this new check are the X11 distribution packages, which
are handled specially as noted below.
The third major change is providing builtin.mk and version.mk files
for each of the X11 distribution packages in pkgsrc. The builtin.mk
file can detect whether the native X11 distribution is the same as
the one provided by pkgsrc, and the version.mk file computes the
version of the X11 distribution package, whether it's built-in or not.
The fourth major change is that the buildlink3.mk files for X11 packages
that install parts which are part of X11 distribution packages, e.g.
Xpm, Xcursor, etc., now use imake to query the X11 distribution for
whether the software is already provided by the X11 distribution.
This is more accurate than grepping for a symbol name in the imake
config files. Using imake required sprinkling various builtin-imake.mk
helper files into pkgsrc directories. These files are used as input
to imake since imake can't use stdin for that purpose.
The fifth major change is in how packages note that they use X11.
Instead of setting USE_X11, package Makefiles should now include
x11.buildlink3.mk instead. This causes the X11 package buildlink3
and builtin logic to be executed at the correct place for buildlink3.mk
and builtin.mk files that previously set USE_X11, and fixes packages
that relied on buildlink3.mk files to implicitly note that X11 is
needed. Package buildlink3.mk should also include x11.buildlink3.mk
when linking against the package libraries requires also linking
against the X11 libraries. Where it was obvious, redundant inclusions
of x11.buildlink3.mk have been removed.
The patches for asapm to try sysmon if APM fails, only support battery
info in units of Watts and Watt hours. However, some machines like my
Compaq Presario X1007EA laptop uses units of Amperes and Ampere hours.
Bump PKGREVISION.
from acpi. Only tested on one laptop, I do not know whether
the envsys names for the acpi devices are stable enough to be
used, but I didn't find any other way to distinguish different
things. As this laptop does not support apm, I hope it still
works after these modifications.
redefines about which buildlink.mk files would care is BUILDLINK_X11_DIR,
which points to the location of the X11R6 hierarchy used during building.
If x11.buildlink.mk isn't included, then BUILDLINK_X11_DIR defaults to
${X11BASE} (set in bsd.pkg.mk), so its value is always safe to use. Remove
the ifdefs surrounding the use of BUILDLINK_X11_DIR in tk/buildlink.mk and
revert changes to move x11.buildlink.mk before the other buildlink.mk files.
use X11_BUILDLINK_MK as a test value. Generally just reordering the
inclusions so that x11.buildlink.mk comes before the other buildlink.mk
files will make everthing work.
to ${X11BASE} in the header and library search paths into references to
${LOCALBASE}/share/x11-links. These packages should now be strongly-
buildlinked regardless of whether xpkgwedge is installed.
Changes well-tested on NetBSD-1.5X/i386 with and without xpkgwedge and
lightly-tested on NetBSD-1.5.1/alpha without xpkgwedge.
convert to use buildlink.mk files, and mark as USE_BUILDLINK_ONLY. Changes
from version 2.9 fix a small error in how event timing was assumed to occur.
which takes entries of the format <make-definition-name>=<pkgname>. This
has not been added to MAKEFLAGS because (a) premature optimisation is the
root of all evil, and (b) because the .for loop used to implement this
shows the wrong results when multiple prefices are evaluated.
Modify all the package Makefiles to use EVAL_PREFIX, thereby simplifying
them considerably.
ALso simplify the logic to calculate the prefix as well.
package's prefix would not work as part of the environment specification
via MAKE_ENV (as it would not be executed in the correct directory).
Fix this by invoking pkg_info(1) directly, not via an intermediate make(1)
step - this is not as clean, but more effective (i.e. it works).
a bit more user-friendly.
Introduce a show-{gtk+,imlib,kdebase,qt1,qt2,xpm}-prefix target in
bsd.pkg.mk, and use "${MAKE} show-*-prefix" in package Makefiles.
2.8 25 Nov 1999
Fixed a bug reported by Hartmut M. Bromkamp <Bromkamp@istgmbh.com>
".... But what really led me into some confusion
is the fact that the -rc option doesn't work:
Everytime I launch asapm by
asapm -rc /root/.asapmrc
it will only display its options and ceases...."
This should at the same time fixed the bug that asapm
did not understand '-fail' anymore (-f was used in the code
instead of -rc).
2.9 19 Nov 1999
Stephen Crane <jsc@darkstar.szyzygy.org> proposed the following:
"I've attached a patch to asapm-2.7 to share or use the closest colours
when creating the pixmaps. (It would also be good to do this for the
battery and other colours but I don't know enough X, yet.) I need this
for my graphically-challenged portable: I think it's better to go with
ugly colours than do without the APM data."
So here is the new version with his patch.
