- Changes for xlog version 2.0.19 - 2020-apr-19
* Updated cty.dat 20200418 (cty-3007)
- Changes for xlog version 2.0.18 - 2019-jun-11
* added FT4 support and updated to ADIF 3.1.0
* Updated cty.dat 20190608
## 003.015.000.000
* N320: Fix MCR initialization, fix checks for LO distribution board,
reset RX IQ balance on init, replace DRAM FIFO with replay block,
improve constraints, fix I/Q imbalance compensation, add FPGPIO control
* N310: increase default dc offset averaging window, make tunes
asynchronous, add capability to control RF filter bypass and freq.band
limits, fix setting user DB EEPROM, correctly report N321 vs N320,
improve DDR3 BIST, update max revision to 7, fix DMA arbitration to
use contiguous packets, replace DRAM FIFO with replay block, fix SFP
link up status, add workaround for clocking interference with external
reference clocks, disable gpsdo clock/time source options when
enable_gps=0
* X300: Fix max bitfile size, fix GPIO ATR property access type, heavily
refactor, introduce conn_mgr, add DPDK support, add
capability to flash NI-2974 FPGA, fix clocking code, enable 11.52 MHz
and 23.04 MHz system ref rates, improve usage of constrained device
args, enable ADC gain through RFNoC API, add mode to set master clock
rate to arbitrary values between 184.32 and 200 MHz, throttle
muxed_zero_copy_if
* E320: Fix time source clobbering ref source, add support for RevE, fix
reporting of FPGA version hash, fix SFP link up status, fix missing
ce_clk driver
* E310: Convert to MPM architecture, fix uhd_image_loader usage, fix DMA
arbitration to use contiguous packets, reduced DMA chans to 4 (using
data stream muxing), fix DRAM_TEST target build
* E3xx: Correct frontend name in devtest
* B200: Add command to query bootloader status, fix sc12 streaming, fix
FIFO sizes on GPIFII interface
* UBX: add temperature compensation mode
* SBX: Only update ATRs when lock state changes
* TwinRX: add LO charge pump properties, increase default charge pump
value on LO1, add low spur tuning mode, fix duplicate write to N value
in DDC
* RFNoC/device3: Read command FIFO size from device instead of
hardcoding values, fix multidevice graph connections, ENABLE_RFNOC now
defaults to ON, search all nodes for tick rate, add update_graph()
call which lets blocks do a graph-wide update of properties, fix
missing port arg in SR_WRITE Noc-Script call, constrain
send/recv_frame_size baed on MTU, fix flushing on init/deinit, disable
FC ACKs for lossless links
* RFNOC/FPGA: Fix rb_stb in split stream block, fix off-by-one error in
the window block, fix phase reset and -accumulator for DDC and DUC
blocks, fix flushing on split-stream block, fix DC offset issue with
DDS by using proper rounding, fix DUC/DDC sample rate switching by
latching N on M in axi_rate_change, various fixes to
uhd_image_builder, fix MTU settings in blocks, align byte count to
8-byte word
* RFNOC: Allow UHD_RFNOC_DIR to contain multiple paths
* Python API: Replace Boost.Python with PyBind11, fix benchmark_rate
statistics, fix phase alignment test script
* Python API: Added include of complex.h to allow pybind to convert
complex data types
* Python API: Make multi_usrp::get_*_usrp_info() return a Python dict
* Python API: Fix array processing in send_waveforms()
* UHD: Allow ignoring fallthrough warnings, reduce Boost footprint,
remove gpsd dependency, improve streaming, reduced the number of
compiler warnings, introduce pop() to the prop tree, add typecast
operator from uhd::dict<> to std::map<>, properly cache config file
data
* MPM/mpmd: Introduce compatible rev numbers to support future hardware,
fix some resource leaks in mpmd, fix spurious reclaims causing
unnecessary warnings, fix resource leaks in liberio xport, allow to
mux data streams over liberio transports (e.g. to require fewer DMA
channels on E310), wait for DPDK links to come up before proceeding,
relax failure handling when updating components (fixes spurious errors
when updating FPGA images over SFP), fix issue where RPC
initialization would hang on failure
* MPM: Re-enable RPC server timeouts after components have been updated
* MPMD: Remove arbitraty frame size defaults for UDP transports
* MPMD: Fix incorrect link rate warnings
* FPGA: Use new device-tree overlay syntax, upgraded to Vivado 2018.3,
broke various paths with critical timing, allow SystemVerilog source
files, improve viv_modify_bd and viv_modify_tcl_bd, fix resets on 2clk
FIFOs
* USB: Allow cancelled USB requests to occur
* USB: Fix global session race condition
* Logging: Always honour log level, don't log colours for non-ttys, fix
includes, demote various log messages, fix logging colours, fix
deadlock on Windows machines
* Examples: Fix benchmark_rate INIT_DELAY, fix memory leak in
tx_samples_c
* Examples: Remove thread priority elevation
* Examples: Add options to benchmark_rate for start delays and priority
* Tests: Make the Python interpreter for devtests a parameter, add unit
tests to MPM
* Utilities: Fix converter benchmark for Py3k and scaling issue
* Tools: Fix kitchen_sink
* Tools: Fix Wireshark dissectors to work with WS1, 2, and 3
* Tools: Various fixes to FPGA functional verification tests
* Docs: Various fixes, fix Doxygen warnings, fix links to KB, update
DPDK information about building libraries, add DPDK subsection about
thread priorities, update testing procedures
* C API: Add uhd_get_abi_string, uhd_get_version_string
* CMake: Make manpage compression optional, allow setting of PKG_DOC_DIR
from the CMake commandline, add replay example, fix missing 'project',
replace ENABLE_PYTHON3 with a simpler Python detection, clean up
superfluous modules, improve log statements, bump dependency min
versions, add MPM unit testing, fix missing BIGOBJ for MSVC, add our
own UHDBoost.cmake to better find Boost across versions and systems,
constrain DPDK check to exact version
* Formatting: Apply clang-format to all files, break after template<>
Some content was about long-ago breaking changes and is no longer
relevant. Everything else is pointers to docs which are superceded by
the general notion that docs should be read :-)
(after off-list discussion with $MAINTAINER)
Sign/upload of log tested on NetBSD 8 amd64.
Packaging changes:
Change to wxGTK30, and don't use mk/wxGTK.mk
Force off lmdb in tqsl's cmake
Upstream NEWS:
localization
Major feature Additions:
Use an ARRL-supplied web service with ULS data to pre-fill station
location information.
Detect when the user runs TQSL “As Administrator” on Windows
systems and warn that this is not recommended.
The user is allowed to temporarily or permanently ignore that
warning.TQSL no longer asks for passwords for callsign
certificates when they are created.
There is a preference setting to re-enable this if desired.
When submitting requests for US 1x1 callsigns, which must always
be a signed request, ensure that the flow properly marks the
callsign as 1x1, and that the requester has a valid callsign
certificate that can be used to sign that request.
minor updates and bugfixes
Changes in version 2.2.1 (20 Jan 2018)
- Fixed bug that could prevent TLE update to work on Windows
- Increased size of TLE source widget in preferences dialog
Changes in version 2.2 (5 Jan 2018)
- New Monitor mode for antenna controller
- Improved satellite search field in module editor
- Finished migration to Gtk+ 3
- Fixed time controller jumping to January in manual mode when using local time
- Fixed crash when connecting to rotctld server that isn't running
- Fixed missing version number in Debian packages
- Avoid using gcc-specific language extensions
- Fixed some automake warnings
- Fixed "GtkDialog mapped without a transient parent..." messages
- Various internal bugfixes and improvements
- Updated translations
- Updated satellite data
- Updated windows build files
Changes in version 2.0 (10 Dec 2017)
- New logo
- Initial port to Gtk+ 3
- Import transponder data from Satnogs database https://db.satnogs.org/
- Support for multiple TLE sources
- Improved radio and antenna rotator controllers (no application freeze)
- Map can be centered around arbitrary longitude
- Natural sort function for satellite list in module configuration
- Select a satellite in all views
- AOS and LOS signalling in rigctl interface
- Autotrack satellites in a module
- Support for user defined end stops on Azimuth axis
- Experimental gpsd support
- Change frequency and antenna position using the mouse wheel
- Highlight satellites within range in the list view
- Improved handling of decayed satellites
- Fixed application freezing while talking to radios and rotators
- Fixed incorrect program name in desktop files
- Fixed 100% CPU load on manual time adjustment
- Fixed issue controlling Yaesu FT-847
- Fixed old log files not being saved
- Fixed track button in rotator controller having no effect
- Fixed operational status of satellites
- Fixed wrong icon in time controller
- Fixed mising ground track for new satellites
- Fixed show next pass shows the current pass
- Fixed problems with plotting footprints near the poles
- Fixed satellite nickname not escaped for Pango
- Updated translations
No binary change because the package did not look for or link against
this library. Upstream removed this dependency in 2008, but
apparently we didn't notice.
pkglint -r --network --only "migrate"
As a side-effect of migrating the homepages, pkglint also fixed a few
indentations in unrelated lines. These and the new homepages have been
checked manually.
pkglint --only "https instead of http" -r -F
With manual adjustments afterwards since pkglint 19.4.4 fixed a few
indentations in unrelated lines.
This mainly affects projects hosted at SourceForce, as well as
freedesktop.org, CTAN and GNU.
The quick summary is that the current package is from April, and
upstream had a new release in August. That new release switches from
qt4 to qt5. Updating GNU Radio in pkgsrc is complex, but tends to
happen fairly soon after the upstream release. As part of that
update, this package is expected to switch to qt5.
003.014.001.001
Device3: latch n on m in axi_rate_change in DUC/DDC
Device3: UART: fix TX <-> RX, FIFO size as parameter
Device3: Restore default buffer sizes for MPMD UDP
RFNoC: Fix off by one error in window.v
E320: fix time source clobbering ref source
B200: Add command to query bootloader status
RFNoC: fix multidevice graph connections
MPMD: Fix corner case in MPM device discovery
MPM: fixed mboard_max_revision value (MPM compat check failures)
MPM: Fix version string for logger
Docs: x300: update docs for multiple timed commands
Docs: Fix Doxygen warnings due to spurious backslashes
Docs: RFNoC: Fix Doxygen warning due to undoc'd parameter
Docs: Adjust FPGA functional verification tests
Docs: Fix MPM cmake command for E320
RFNoC: Re-enable flow ctrl for blocks on same xbar
Tools: Fix build issues with kitchen_sink
cmake: Add UHD_COMPONENT variable
003.014.001.000
N320: Terminate the DAC when not transmitting
E320: Add support for rev E
E320: Added .gitignore for FPGA build products
X300: Add DPDK support
X300: add capability to flash NI-2974 FPGA
X300: Broke two critical timing paths in FPGA
X300: fixed udp WSA buffer size assignment issue
E310: Fix DRAM_TEST target build
B200: Add bootloader for FX3 (fix for B2xx failing to enumerate)
TwinRX: Expose charge pump current for LO2
TwinRX: Add low spur mode for LO2
TwinRX: increase rev c lo1 charge pump default value
TwinRX: Fix tick rate
Device3: Constraint send/recv_frame_size based on down/upstream MTU
Device3: Fix MTU and default frame sizes
RFNoC: Search all nodes for tick rates
RFNoC: Change default address for the reg readbacks
uhd_image_builder: Let the OOT module point to folders not named "rfnoc"
uhd_image_builder: Add --auto-inst-src
MPMD: Fix spurious reclaim call after unclaim
MPMD: Release resources on destruction
MPM: Add SW/HW compat
liberio: Release context holder on destruction of last liberio xport
transport: fixed a pre-mature buffer reset
nirio: Fix typo in nirio_zero_copy
GPSD: fix API for 'gps_read'
AD9361: Fix return values for tune and set_clock_rate
DUC/DDC: Fix phase reset and accumulation
cores: Use NSDMI consistently in ?x_dsp_core_3000.*
Logging: fix deadlock issue on Windows machines
Logging: Fix ANSI colour codes
Utils: Add X300/X310 reset utility
Docs: Improved Windows-related build instructions
Docs: Add link to README for building custom filesystems for N3xx
sim: Fixing the port number in use for connection
tools: Fix for proj creation in ip_utils for tcl-based IP
tests: Fix mock_ctrl_iface for 32-bit MSVC
The error was:
-- Could NOT find PkgConfig (missing: PKG_CONFIG_EXECUTABLE)
CMake Error at /usr/pkg/share/cmake-3.13/Modules/FindPkgConfig.cmake:505 (message):
pkg-config tool not found
While the package is not documented to use C++11, it uses std::string
constructs added in C++11, and fails compilation with g++ 5.5.0
without --std=c++11. Add todo markings to file upstream bugs;
upstream does not adequately document prereqs.
Trusted QSL V2.4.2 Release Notes
This version of Trusted QSL (TQSL) has new features as well as
corrections for defects found since TQSL 2.4.1 was released. This
release also includes an update to the most recent TQSL configuration
file.
TQSL 2.4.2 can be installed to upgrade any older version of TQSL. You
do not need to install every release from 2.2 through 2.4, you can
upgrade directly to v2.4.2 in one step.
IMPORTANT NOTE for MacOS users:
TQSL has been built to be compatible with older Mac systems (OSX 10.4
and later) and to work on both PowerPC and Intel CPU Macs. The current
release of OSX (10.14, or Mojave) issues a warning about
TQSL when it is run stating that it is not “optimized”, and that it
will not work with the next release of OSX. This is forcing us to drop
support for PowerPC systems in order to continue to support Mac
systems. We will freeze TQSL 2.4.x and make it available indefinitely,
but the next major release of TQSL will not work on PowerPC Macs or
Macs running OSX older than Tiger.
On all three supported platforms (Windows, MacOS, and Linux),
installing TQSL 2.4.2 will replace older versions of Trusted QSL while
preserving your Callsign Certificates, Station Locations, and
preferences. On Windows, simply run the TQSL 2.4.2 installer, which
will automatically uninstall older versions of TQSL (and, if
installed, TQSLCert). On Mac OS X, open the disk image (.dmg) file and
drag the “Trusted QSL” folder to your Applications folder. Direct
the installer to “Replace All”, which will uninstall old files.
For Linux systems, unpack the tar file and read the INSTALL file for
directions. TQSL 2.4.2 has been “localized” to allow use in the
native language of non-English speakers. This could not have been done
without the help of the volunteers who have contributed translations
for TQSL.
Thanks to the following for their assistance:
Chinese: Caros, BH4TXN
Hindi: Manmohan, VU3YBH
German: Andreas DF4WC
Italian: Salvatore IV4FYV
Japanese: Akihiro JL3OXR
Portuguese: Nuno CT2IRY
Russian: Vic US5WE
Spanish: Jordi EA3GCV
The following list describes the major changes in the v2.4.2 release
of Trusted QSL.
TQSL changes
Defects Corrected:
Ensure that the exit status message emitted by TQSL appears in English
so logging programs can use that to detect exit status. In the past,
this could have been output in the local language, making it more
difficult for the calling program to detect whether or not there were
any errors. Improve setting of ITU and CQ zones when defining a
Station Location. There were many cases where these were left empty,
which means that Station Locations were more likely to not have zones
defined.
Fix issue with Windows updates of TQSL failing when the user's
directory has a space embedded. Note that this is a forwards-looking
fix: this defect is in the existing TQSL 2.4.1, so updates for users
with spaces in their usernames will continue to fail until after 2.4.2
is installed. Remove spurious error message when run on a system
where the local language is not supported.
Features Added:
When displaying a callsign certificate where the private key is
missing from the local system, specifically state that the private key
is not found. Added a specific message for keys that cannot be opened
to provide the root cause. Improve the error message for missing
private keys to be more descriptive. Add the ability to map Cabrillo
modes to user-specified ADIF modes using the cab_modes.dat file in the
TQSL user directory. File has Cabrillo modes (two characters), then an
ADIF mode, comma delimited. Default file is provided by TQSL and
users can provide their own. Allow adding translations without making
code changes.
Reinstalling TQSL 2.4.1
Downgrading to TQSL 2.4.1 can be seamlessly performed by uninstalling
TQSL 2.4.2 and reinstalling TQSL 2.4.1.
UHD 3.14.0.0
N320: Add support for N320 and N321
USRP-2974: Add support for USRP-2974
DPDK: Add DPDK-based sockets-like library (for N3xx)
N3xx: clocking API changes for transitioning clock and time sources
N3xx: Bump max rev to G/6
N3xx: Improve error messages for invalid clock/time settings
N3xx: Get RFNoC crossbar baseport from FPGA
N3xx: init peripherals before loading FPGA (to fix SFP0 init issues)
N3xx: Move Linux kernel to 4.15
N3xx/E320: Prepend SDK filename with device name
N3xx: Update max rev to 7 (H)
N3xx: Remove DDR3 from standard BIST collection
N3xx: BIST: Improve DDR3 BIST to check for DmaFIFO
N3xx: BIST: Auto-load the AA image for the ddr3 BIST
N3xx: BIST: DDR3 test only enumerates first block
N310: Modify AD9371 reset function to keep it in reset
N310: move init_rf_cal before JESD de/framer bringup
N310: Fix sporadic power on failures (requires firmware update)
E3xx: Increase spp limit for E3xx radio
E320: bist: Fix ref_clock lock test implementation
E320: bist: Add link_up test
E320: Add all 5 temp sensors, fan sensor and rssi sensors per channel
E320: Fix tx/rx atr - antenna and frequency settings
E320: Enable devtest for E320
E320: images: Separate images package for Aurora image
E320: Get RFNoC crossbar baseport from FPGA
E320: add fpga_version_hash to e320 device info
E310: Fix initialization of antenna and frequency values
E31x: Destruct RFNoC before loading idle image
X300: Reduce default send_frame_size to 4000 over Ethernet
X300: Change Ethernet buffering
X300: Log git hash and compat number as debug message
X300: Move defaults to their own header
X300: Use constrained_args
X300: Enable clock_source and time_source device args
X300: NIRIO: Demote RPC client cancel/abort to TRACE
X300: remove default_buff_args properties
X300: Remove 120 MHz master_clock_rate option
X300: Set minimum master clock rate to 184.32 MHz
X300: Factor our PID -> MB type and MB type -> product name mapping
X300: Remove usage of boost::bind
X300: Fix compiler warnings related to type conversions
X300: Fix tick and sample rate setting
X300: Enable ADC gain through RFNoC API
X300: Demote NIRIO rpc client start/stop log messages to DEBUG
X300: Enable 11.52 MHz and 23.04 MHz system ref rates
X300: Enable x300_device_args.to_string()
X300: Catch more inconsistencies in x300_device_args
X300: Removed invalid 200 MHz sysref rate
X300: Change PLL CP currents in x300_clock_ctrl
B200: Remove superfluous fake lambda
B200: Add support for user regs
B200: Fix compiler warnings related to type conversions
B100: Move fifo_ctrl_excelsior to b100 subdir
B100: Fix fifo_ctrl_excelsior not exiting
B100: Remove all Boostisms from fifo_ctrl_excelsior
B100: Demote some clocking-related log messages to trace
MPM: Get list of temperatures from all thermal zones
MPM: add link_speed xport_info
MPM: Add mpm_device as usrp_hwd module variable
MPM: Add usrp_update_fs
MPM: Add i2c APIs for simple transfers
MPM: Add vector-based transfer function for i2c
MPM: Add variable configuration support to nijesdcore
MPM: Add eyescan utility to nijesdcore
MPM: Add PRBS-31 testing to nijesdcore
MPM: Add convenience function to pull i2c bus from device tree
MPM: Open and close i2c file descriptor on every access
MPM: Multiprocessing instead of threading for claimer loop
MPM: Factor out user EEPROM code into own module
MPM: Add gpgga sensor function to GPSd iface
MPM: Add bridge mode support
MPM: Parameterize max UDP link allocation
MPM: xport: add commit_xport docstring
MPM: Improve error message on double-claim
MPMD: Parallelize broadcast-finding
MPMD: add option to enum rfnoc blocks from args
MPMD: add link speed to xport udp
MPMD: Add API to set RPC timeout atomically
MPMD: Move timeout constants to header
MPMD: Use new RPC API with timeout
MPMD: Increase claim_rpc call timeout
MPMD: implement get_*x_hints
MPMD: honor user supplied send/recv_frame_size args
MPMD: Use 4096 bytes for frame size for liberio transport
MPMD: Use init timeout for update_component
MPMD: Allow reclaim failures on component updates
MPMD: Fix typecast warning in property tree default settings
Device: Parallelize device discovery
Device3: Move from packet-based to byte-based flow control
Device3: Constrain send_buff_size to input fifo size
Device3: remove tx_hint[send_buff_size]
Device3: Replace NULL with 0 for empty function pointers
Device3: Remove redundant function call
Device3: Fix flow control window and interval
UHD: Release recv buffers earlier in rx_streamer
UHD: Fix ADF400x driver for ref counter and charge pump mode
UHD: Improve constrained_device_args_t
UHD API: Add multi_usrp::get_user_settings_iface()
UHD: Remove usage of time_t (except when required)
UHD: add default xport params to udp_zero_copy
UHD: Update rx_frontend_gen3.v controls for 1/4-rate mixer
UHD API: Move definition of ALL_MBOARDS and ALL_CHANS constants to
CPP file.
UHD: Add traffic counter to null source sink
UHD API: Add multi_usrp::set_sync_source() API
UHD: Improve documentation for the UHD exception types
UHD: Improve documentation for set_{time,clock,sync}_source
UHD: add .clang-format file
UHD: Add device arg to enable dual ethernet for tx
UHD API: Add sync source to Python API
UHD API: Add support for Tx LO control to C API
UHD: Improve compatibility of abs() calls
UHD: include <stdint.h> for int64_t for time_spec
UHD: Updates to coding guidelines
UHD: Fix MSVC warnings by changing a size_t to unsigned int or
uint32_t
UHD: Add potentially missing but sometimes inferred include for
experts
UHD: Add default xport params to udp_wsa_zero_copy
UHD: Move device3 flow control functions to header for benchmark
utility
UHD: Make sure BOOST_VERSION is always available
UHD: Make clang-format skip formatting for some data structures
UHD: Remove vim hints in headers
UHD/MPM: Apply clang-format to all files
UHD: Add modified clang-format for headers
UHD: Replace uhd::math::log2 with std::log2
UHD: Replace boost::*::{lcm,gcd}() with portable versions
UHD API: Change get_{tx/rx}_dc_offset_range default from ALL_CHANS
to 0
UHD: Revert to boost instead of std for sleep in some instances
UHD: Replace Boost macros with custom ones for endianness
UHD: muxed_zero_copy_if fixes
UHD: Replace Boost lock & mutex with std variety for AD9361 code
UHD: fix includes for boost::noncopyable
UHD: Fix buffer size warning on UDP transport
UHD: Remove duplicate operator=() for sid_t
UHD: Fix conversion warning in max287x
UHD: Fix various type-conversion compiler warnings
RFNoC: Convert SR_READBACK_REG_FIFOSIZE to bytes
RFNoC: Add ability to enable/disable RX timestamp
RFNoC: add async message handler
RFNoC: Changes to traffic counter register names
RFNoC: Fix replay example port args
RFNoC: Fix default SPP for replay
RFNoC: Add halt to replay API
RFNoC: Fix late packet errors
RFNoC: Fix detection of outstanding acks by ctrl_iface
RFNoC: Add some missing virtual destructors
RFNoC: Update FIFO XML definition
RFNoC: Prevent unnecessary FC ACK packets
RFNoC: More graph traversal fixes
RFNoC: Fix scaling of M and N values in DDC/DUC
RFNoC: Fix typos in legacy_compat
RFNoC: Limit number of control packets in flight
RFNoC: Disable FC ACK packets for lossless links
RFNoC: Add valid num_input_ports check to node_ctrl_base
Utils: Add Zip test to downloader
Utils: Factor wait_for_lo_lock() out of cal utils
Utils: Add check for gdb_eeprom before accessing
Utils: Deny positional options in uhd_image_loader
Utils: Set tx gain to max for rx iq cal
Tools: Add tool to analyze settling time of gain and freq changes
Tools: Make the UHD source gen a plugin for the phase alignment test
Test: Add Python API test
Test: Integrate Python API Tester into Devtest
Test: Add graph impl test to device3_test
Test: Retrofit sph test to use new mock transport
Test: Enable rx_samples_to_file in devtest for X300
Test: Fix CMake endif warning for devtest
Test: Fix compiler warning about unused timestamp
Test: Add #include in system time test
Test: Add benchmark of streaming code paths
Test: replace has_key by using 'in'
Test: Add universal_newlines to subprocess call in devtest
Examples: add rfnoc_radio_loopback example
Examples: Add benchmark_streamer example
Examples: Add dual measurements to benchmark_streamer
Examples: Clean up rfnoc_radio_loopback example
Examples: Add keyboard controls to rx_ascii_art_dft
Examples: Add benchmark_streamer support for multi-channel streamer
Examples: Optimize benchmark_rate start time
Examples: Improve formatting and comments in tx_waveforms
Examples: Optimize tx_waveforms memory allocations
Examples: change boost to std for time commands
Examples: Add LO Offset to rx_samples_to_file
Examples: update lo-offset naming in tx from file
Examples: Add lo-offset to tx_waveforms
Examples: Improved error message in tx_waveforms
Examples: Move ascii_art_dft main function within include guard
Examples: Fix boundary condition in ascii_art_dft plotting
Docs: Fix Doxygen warnings
Docs: Add info on how to implement user regs on B200
Docs: Add manual page on compat numbers
Docs: Add comments for TwinRX and MCR
Docs: N3xx page shell formatting and bb image
Docs: n3xx: fix Salt formatting
Docs: Add note on manually disabling NEON extensions
Docs: Fixed typos in N3xx image names (SD card build)
Docs: Add notes on external reference frequencies for X300
CMake: Bump CMake minimum version to 2.8.12
CMake: Change SOVERSION and VERSION for the library files
CMake: Extend list of additional Boost versions
CMake: fix variable usage
Cmake: remove Boost from dyn libs for tests on Apple
Cmake: Fix MSVC options (add /bigobj)
Cmake: Use native format for setup.py
CPack: Fix RPM generation
003.013.001.000 Changelog
E320: Fix front panel GPIO readback
E320: Fix master_clock_rate setting
E320: Print extra ouptut for ref_clock BIST
E320: Fix gps_locked type
E320: Fix return value of get_fpga_type()
N3xx: Enable setting clock and time sources at runtime
N3xx: Add ref_clock BIST
N3xx: Improve set_time_source() and set_clock_source()
N3xx: Add exception for init failure
N3xx: Remove HA, XA images packages
N3xx: Change init() procedure to reduce configuration time
N310: Add frequency bounds
N310: Fix RX antenna mapping
N310: Add log messages when re-initializing dboards
N310: Add skip_rfic argument to reduce time of BIST
N310: Add initialization of TX bandwidth
E310: Fix initialization of antenna and frequency values
E310: Type-cast fix for Boost
X300: Improve firmware compat error message
X300: Updated niusrprio driver
X300: Add recovery for duplicate IP addresses in EEPROM
X300: Prevent duplicate MAC and IP addresses from being programmed
X300: New mode to configure master clock rate
X300: Implement RFNoC get antenna functions
B2xx: Fix values of MASK_GPIO_SHDN_SW and GPIO_AUX_PWR_ON in firmware
B2xx: Revert changes to DSP core to fix scaling factor adjustment
B2xx: Restore asynchronous reset of AD936x
(fixes LIBUSB_TRANSFER_OVERFLOW and unexpected sid errors)
TwinRX: enable ch1 lo amps if ch2 is using an external lo source
TwinRX: Correctly initialize antenna mapping on X300
TwinRX: Revise ADF5356 frac2 register calculation to prevent drifting spurs
TwinRX: Fix initialization
TwinRX: Tuning improvements
TwinRX: Enable phase resync on ADF535x
TwinRX: Make routing to LO1 and LO2 mutually exclusive
BasicRX/LFRX: Fix real mode in rx_frontend_core_3000
UHD: Define UHD_API as empty string when building static lib
UHD: Changed to 'all_matching' endpoint resolution for udp_simple transport
UHD: Add support for NEON SIMD
UHD: Fix usb_dummy_impl compilation in MSVC
UHD: Reconcile time_spec operators with boost concepts
UHD: Fix rounding in ddc/duc rate calculation
UHD: Increase MPMD RPC timeout when calling set_time_source()
UHD: Fix RX streamer SOB and EOB handling
UHD: Add UHD_SAFE_CALL to block_ctrl_base destructor
UHD: Change SOVERSION to ABI string and VERSION to full UHD version
UHD: Update cmake style to use lower case commands
UHD: Add SOURCE_DATE_EPOCH
UHD: Improve logic for UHD_IMAGES_DIR
UHD: Add RUNTIME_PYTHON_EXECUTABLE
UHD: Fix return value of get_rolloff() for filters
UHD: Properly register devtest
UHD: Fix log statement for Port number on RFNoC block
UHD: Use "MATCHES" instead of "STREQUAL" for "Clang"
UHD: Fix GPGGA string formatting for gpsd
Device3: Set default block control response SIDs
Device3: Fix block control flushing
RFNoC: Improved flushing mechanism in noc_shell and dma_fifo
RFNoC: Install missing dma_fifo_block_ctrl header
RFNoC: Replace some [] with .at() in radio_ctrl_impl
RFNoC: Fix graph traversal
MPM: Add Git hash, version to device info
MPM: Reset the RPC server upon reload
MPM: TDC: Update PDAC BIST and flatness test to use latest APIs
MPM: Fix handling of 0-valued dt-compat
MPM: Fix GPSD sensor names for N3xx and E320
MPM: Add args to update_ref_clock_freq to properly support dynamic setting
of clock and time references
MPM: Fix Pylint warnings
MPM: Identify sysfs gpios more generically
MPM: Add lock_guard() function
MPM: Factor E320 and N3xx BIST code into common module
MPM: Add gpsd error handling
MPM: Add FPGA git hash to device info
MPMD: Increase RPC timeout during readng mb sensor
MPMD: Improve error message for compat number mismatches
Python API: Enable Python API on Windows
Python API: Change .dll to .pyd for Win32
Python API: Fixing Boost.Python initializer visibility
Python API: Fix duration of benchmark rate
Python API: Add missing constructors of time_spec_t
Python API: Expose streamer timeouts
Python API: Tighten the scope of releasing the GIL
Python API: Add device_addr_t
Python API: Populate the tune_result_t binding
Utils: Many fixes and enhancements for uhd_images_downloader
Utils: Update query_gpsdo_sensors to work on E310
Examples: Removed some legacy code patterns from RFNoC examples
Examples: Fix channel argument for rx_samples_to_file
Examples: Fix benchmark_rate MIMO synchronization
Examples: Add phase alignment example
Examples: Fix RX antenna not being applied in txrx_loopback_to_file
Test: Add more env vars, make Py3k compatible
Test: Add multi_usrp_test.py to devtest
Test: Clean up, refactor, and improve devtest
Test: Enable rx_samples_to_file in E320 devtest and N3xx devtest
Test: Reduce sample rate for E320 1G devtest
Test: Add unit test for eeprom_utils
Docs: Add clock_source and time_source to n3xx argument list and fix WR clock_source call
Docs: Minor tweaks to the Python API manual page
Docs: Add E320 test procedures
Docs: Added TwinRX page
Docs: Fix N210 MIMO Phase Alignment test command
Docs: Add E320 information
Docs: Improve sections on clock/time references
Docs: Add section on X300 motherboard clocking
Docs: Add more information on Salt for N3xx and E320
Docs: Adjust E310 functional verification tests
Docs: Add documentation on GIL release
Debian: Update control files
Images: Add N3xx CPLD file to manifest
- Changes for xlog version 2.0.17 - 2019-jan-14
* Suppress GCC warning "stringop-truncation" in editest.c
which occurs with GCC >= 8.1.
* Updated cty.dat 20190114
- Changes for xlog version 2.0.16 - 2019-jan-13
* added JS8 support and updated to ADIF 3.0.9
* Updated cty.dat 20181210
kalibrate, or kal, can scan for GSM base stations in a given frequency band
and can use those GSM base stations to calculate the local oscillator
frequency offset.
kalibrate, or kal, can scan for GSM base stations in a given frequency band
and can use those GSM base stations to calculate the local oscillator
frequency offset.
Please note that if you are on 2015 firmware you must update the SPI flash
and CPLD of your hackrf, otherwise you may experience unpredictable behavior.
See: https://github.com/mossmann/hackrf/wiki/Updating-Firmware
HackRF 2018.01.1
- improved reliability of DFU boot loader
HackRF 2017.02.1
- Sweep mode
- Hardware synchronization
- reduced power consumption
- bug fixes
Version 3.3
2018-08-20
* New models, R&S xk2100, TRXMAnager, Meade LX200
* HTML manual is now generated at 'make dist' so users don't
need GNU Info tools installed. TNX Greg, N1DAM for the suggestion.
* Handle longer udev generated file names up to 512 characters
* Add debug time stamps with new '-Z' option and '--debug-time-stamps'
options to rigctl, rotctl, rigctld, and rotctld utilities.
* rigctld/rotctld continue working after serial or TCP device
disappears.
* Updates and fixes to FT-817, K3, IC-7300, AOR 3030, TM-D710,
OMNI VII, TH-D72, Flrig, TS-590, piHPSDR, TS-2000, and netrigctl.
* Update utility manual pages (section 1) and remove their reference
material from the Info manual so it only needs to be update in one
file.
* Add new general project manual pages (section 7) and edit the Info
manual to match. These should not change much so keeping them in
sync should not be too much of a burden. The Info manual may be
removed at some point in the future.
* Last planned release of the present API/ABI. Future releases will
require recompilation and relinking by client programs using the C
library interface (programs that only use the network daemons should
be unaffected).
## [3.7.13.4] - 2018-07-15
### Fixed
#### Project Scope
- Fix Boost 1.67 linking issue
#### gnuradio-runtime
- Logging: fixed issues where messages weren't properly written to
stdout/stderr due to incorrect strings
#### gr-analog
- `fmdet_cf`'s derivative coefficients were wrong.
#### gr-blocks
- `skiphead` used to incorrectly handle tags, now properly shifts
#### gr-digital
- `qa_packet_format`: Unit test used to potentially lock up due to
incorrect condit ionals
- `clock_recovery_cc`, `crc32_bb`: Accessing the `[0]` element of an
empty vector is UB, even if you don't use the result afterwards.
#### gr-fec
- `polar_encoder`/`_common`: Fixed multiple out-of-bound accesses due
to insufficient vector length checks
#### gr-filter
- `fft_filter`, `filter_delay`: Accessing the `[0]` element of an
empty vector is UB, even if you don't use the result afterwards.
## [3.7.13.3] - 2018-06-13
### Fixed
#### Project Scope
- For non-C++11 compilers, the new cstdint include doesn't work out; conditionalized it.
## [3.7.13.2] - 2018-05-31
### Fixed
#### Project Scope
- Actually bumped version in CMakeLists.txt to 3.7.13.2; the 3.7.13.1 tag was tagged off-branch; maintainer failure to simultaneously push a commit that raises the internal version number to 3.7.14.0: this had to be reverted ASAP.
## [3.7.13.1] - 2018-05-31
### Fixed
#### Project Scope
- Actually bumped version in CMakeLists.txt
## [3.7.13.0] - 2018-05-31
### Fixed
#### Project Scope
- `boost::posix_time::[milli]second` takes integer numbers, and we now at least cast the floats to integers, as Boost 1.67 forced us to realize we're (incorrectly) using floating point her
- CMake: using regex to match compiler against "Clang" now enables correct build on OS X
#### GRC
- Fixed GRC bug which broke WX and Qt (by altering the template code), in multiple (less than awesome) steps
#### gr-blocks
- `float_array_to_int`: int32 limits were wrongly hardcoded.
- Fixed the undefined behaviour happening in `float_to_complex` when accessing the second input_items element in the single-input case
## [3.7.12.0] - 2018-04-01
### Software Engineering
- Changed Changelog format
- Introducing Semantic Versioning
- Change of development model: Rather than merging bugfixes to maint, merging maint to master, and next, if applicable, we'll be moving forward more in a typical management model: Development happens on master, and bugfixes are cherrypicked onto the maint-${RELEASE} branch. More info: http://lists.gnu.org/archive/html/discuss-gnuradio/2018-02/msg00133.html
- First attempt at having a .clang-format file to improve code contribution style quality. This is Work In Progress.
### Fixed
#### Project Scope
- Buildability on systems where custom CMake command would try to find "" (empty string) as executable
- Buildable with C++11 compilers (though deprecation warning-rich, due to `unique_ptr`)
- several previously improperly handled include directories now actually included in individual lib/CMakeLists
- Unit test/QA now parallelizable
- Logger works with log4cpp <= 1.1.2 both in and out of tree
- Python linkage under MinGW64
- Documentation Directory now uniformly "docs/" (instead of sometimes "doc/")
- `log` vs `logf` performance bugs
- on-time `pmt::mp("string")` calls (instead of cached PMTs) performance bug
- Doxygen build now reproducible
#### GRC
- Dialogs' parent windows
- Embedded Python Blocks now work in hierarchical GRC flow graphs
#### gnuradio-runtime
- `random.h`: Uniform integer Generation depended on Boost version > min version
- `random.h`: time-dependency when seeding with `0` replaced with actual standard seed
- block startup now synchronized via barrier
- New tag propagation policy "custom" for own implementation
- `get_tags_in_range` used `v.resize(0)` to clear vectors, which lead to unnecessary memory reallocations
- `logger_ptr` now always a pointer, no matter whether logging is enabled; fixes heap corruption bug
- `buffer[_reader]_sptr` superfluous grab/release performance bug
- BSD threading and shared mem compatibility
- PMT: `equal()` comparison
#### gr-utils
- Sorted files in `gr_modtool` makexml processing, leading to improved reproducibility of builds
#### gr-audio
- OS X: memcpy bug
- OS X: debug mode
- Non-Linux ALSA compatibibilty
#### gr-analog
- `fmdet_cf` now has GRC file
- `fastnoise_source`: non-threadsafe `libc` `rand()` replaced by XOROSHIRO128+
#### gr-blocks
- `simple_copy` Ctrlport example
- Metadata sink/source not closing file on `close()`
- `multiply_matrix` formerly used "magic int" value where its API expected enum (and that int wasn't covered)
- TCP connection ASIO bug
- `tags_strobe`: superfluous tags addition
- `vector_sink`: multithreading hazards on `data` access
- `tuntap_pdu`: MTU-sized IP packet reception
- `socket_pdu`: Garbage Collect closed TCP connections
#### gr-channels
- IQ imbalance block formula now mathematically correct now mathematically correct
- `selective_fading_model`: proper scaling of path length
#### gr-digital
- `additive_scrambler_bb`: tag triggered reset
- `stream_to_tagged_stream`: tag offset after `unlock()`
- `blks2/packet.py`: Flushing for small packets
- `interpolating_resampler`: GCC 4.0 compile error
- `constellation`: 16QAM demapper was wrong for one constellation point
- `chunks_to_symbols`: mutex-guard LUT against modification during use
- MSVC compatibility throug `and` -> `&&` etc
- `crc32_bb`: handle unpacked bytes correctly
- `ofdm_carrier_allocator`: catching wrong allocations instead of crashing
#### gr-dtv
- All examples now are installed
- DVB-T2: Removed L1 post scrambling in spec v1.1.1 mode
#### gr-fcd
- Building on non-Linux systems
- Extended symbol bug in Reed-Solomon encoder
- DVB-T Cell identifier
#### gr-fcd
- Building on non-Linux systems
#### gr-fec
- `channel_construction.py`: return int frozen bit output
- `GSL_LDFLAGS` propagation
- `polar_decoder` used to be flaky
#### gr-fft
- locking of fftw wisdom
- `window.cc`: removed NaN due to FP math
- compilation under MinGW
- `logpwrfft.py` reference scaling integer division bug
#### gr-filter
- Simpson's rule code removed in favor of GSL call
#### gr-qtgui
- Time sink: Segfault with tag trigger
#### gr-uhd
- Antenna selection in UHD apps
- `uhd_fft` scalar gain-capability
- Device selection for multi-device operations in UHD apps
- TX streamer creation
#### gr-zeromq
- Multi-part messages reception
### Added
#### Project Scope
- Ninja (https://ninja-build.org) now a supported build system
#### gnuradio-runtime
- Python can now get `gr.WORK_CALLED_PRODUCE` and `gr.DONE`
#### gr-utils
- `gr_modtool`: Autocompletion, line editing
- `gr_modtool`: `copyrightholder` option
#### GRC
- "Create Duplicate"
- "Save a copy"
- BokehGUI
#### gr-blocks
- New `tag_share` block: take tags from one two input streams to one output stream
- `tag_gate`: tag filtering
- `file_source`: configurable `file_begin` stream tag
- `moving_average`: Vector mode (with element-wise MA)
- `plateau_detector`: threshold get/set
#### gr-digital
- `costas_loop_cc`: Optional loop variable outputs
- New `correlate_access_code_tag` block
- `glfsr` exposed through Python
#### gr-dtv
- 256QAM mode for ITU-T J.83B transmitter
#### gr-fec
- negative Polynomials in `cc_encoder`
#### gr-filter
- `symbol_sync_{cc|ff}`
#### gr-uhd
- `uhd_app.py`: selectable time/clock sources
- make `recv()` call's timeout parameterizable
- message-based RX tuning through sink, TX through source
### Changed
#### Project Scope
- VOLK version requirement: 1.4.0
- Minimal required SWIG version now 2.0.4
- GSL optional dependency
- Threw out completely unused `gr_??int` types
- Doxygen build no longer contains timestamps
- Doxygen build now reproducible
- Though factually before, now officially include ZeroMQ and Sphinx as optional dependencies in docs
#### gnuradio-runtime
- Python gateway allows variable number of ports
#### gr-utils
- `gr_modtool`: Block template now uses `numpy.float32` instead of float. 32bit float is actually the default GNU Radio type.e.
#### gr-blocks
- `vector_sink` can preallocate memory for desired amount of items
#### gr-digital
- `header_format_default` now sps>1-capable
- `correlate_acces_code` uses `GR_LOG`
#### gr-uhd
- `uhd_fft`: respect `lo_offset` in `set_bandwidth`
- `usrp_source`: freq tag now actually reflects last set frequency, even on multiple channels
#### gr-qtgui
- Labels: now with 98.121212388% improved floating point formatting
- Time Sink: Stem plot option exposed
### Deprecated
#### gnuradio-runtime
- `gr::sys_pri`
includes fixes for build breakage introduced by boost 1.67
## 003.011.001.000
* N310: fix compiler warnings
* N310: Implement digital loopback
* N3xx: Add N3xx devtest
* X300: Properly coerce master clock rate (tick rate)
* X300: handle bad weak_ptr during pcie discovery
* X300: handle bad weak_ptr during pcie discovery
* X300: Fix check_radio_config() to fix errors when using a single dboard
in slot A
* B200: docs: Suggest modifying recv_frame_size for more stability
* B200: Fix bandwidth warnings and ranges
* N2xx: Fix regression issue that limited tuning range
* UBX: Change antenna functions to coercers on antenna/value properties
* adf4002: Fix register programming for power down bit
* UHD: Fix config file path for some Windows builds
* UHD: Add operators == and != for uhd::dict
* UHD: Add device_addr_t constructor from map
* UHD: Fix range of gain group to skip gains with zero step
* UHD: Changes to support Boost 1.67
* UHD: Correctly set end of burst flag in RX metadata
* UHD: Reduce usage of boost::assign, boost::this_thread::sleep, and boost:bind
* UHD: Update multi_usrp::get_usrp_?x_info() for MPM devices
* UHD: Refactor static const values to fix linker errors in niusrprio
* mpm: cmake: Add git hash and version info to Python module
* mpm: Add reference counters to UIO
* mpm: Add offset to EEPROM reads
* mpm: Disable PPS out during initialization
* mpm: Update cmake to find the correct python3
* mpm: Bump maximum supported revision to 5 (Rev F)
* mpm: Fixed db slot typo in db-id
* mpm: Increased claim timeout, made a separate RPC connection for claim, and
added asyn calls for long RPC executions
* mpm: Improve xport<->SFP mapping algorithm
* mpmd: Improved find routine to fail fast and verify correct device is
reachable
* mpmd: Add missing virtual destructors
* rfnoc/x300: Make sure peek32() and peek64() are called with actual addresses
* rfnoc: ctrl_iface cleanup
* rfnoc radio: Improve warning for too many samples requested
* rfnoc radio: get_rx_stream resets sequence num
* examples: Increase settling time, increase buffer fill time, and fix subdevice
selection in txrx_loopback_to_file
* examples: Improvements to benchmark_rate
* utils: downloader supports multiple RegExs
* utils: Added code to handle underruns during self calibration
* utils: Fix 30s tiemout in query_gpsdo_sensors
* logging: Improve style consistency and demote some messages
* logging: Fix UHD_LOG_FILE cmake variable
* Docs: Add Known Issues section to USRP1, B100, and USRP2/N2x0
* Docs: Hide dependencies directory from Doxygen
* Docs: Clarify subdev specs and magnesium driver usage for N300/N310
* cmake: Improve warning for missing requests
* cmake: update NSIS template
* cmake: Remove images downloader section (replaced by manifest)
## 003.011.000.001
* N300: Added driver support (includes some refactoring of N3xx
codebase)
* MPM: Fix PyLint warnings, Fix error handling for TCA communication
errors, Fix printout of AD9371 version
* uhd_images_downloader: Create unique archive names for images archives
(now include git hashes in the filename)
* uhd_images_downloader: Fix SHA256 check
* utils: Add support for N3xx filesystem images to images downloader
* UHD: Minor logging fixes
* UHD: fix legacy compat to work with 2TX radio block
* X300: improve lvbitx bitstream md5 read time
* examples: Enhance benchmark_rate with more stats and timestamps for errors
* cmake: Correctly fail when an unavailable component is requested
* debian: Add UHDConfig.cmake to install list for libuhd-dev
Performing substitutions during post-patch breaks tools such as mkpatches,
making it very difficult to regenerate correct patches after making changes,
and often leading to substituted string replacements being committed.
This package has long had patches to change "inline" to "static
inline", and somewhat recently added a SUBST_ stanza to do the same
thing, resulting in "static static inline". This commit drops the
patches, and has been build tested on netbsd-8/vbearmv7hf-el and MacOS
(and hence clang).
PKGREVISION++, even though in theory any previous build shouldn't change.
Version 3.2
2018-03-31
* New models, IC-7850/IC-7851 in IC-785x. Mike, W9MDB
* Fix ft991_get_mode, Mike, W9MDB
* New model, FT-891. Mike, W9MDB
* New Barrett 2050 backend, Mike, W9MDB
* New Flrig backend, Mike, W9MDB
* New model, IC-M710, Mike, W9MDB
* Build instructions and test script for Python3
* Rename autogen.sh to bootsrap and don't call configure
* micro-ham support. Christoph, DL1YCF
* New rotator, SPID MD-01/02 in ROT2 mode, Norvald Ryeng, LA6YKA
* New model, Flex 6400/6600, Mike, W9MDB
* New model, IC-7610, Mike, W9MDB
* Add support for CM108B PTT, Max Lock
* New model, Rohde & Schwarz XK2100, Mike, W9MDB
* Many other bug fixes and enhancements
predict is a curses based satellite tracking/orbital prediction program
PREDICT provides real-time satellite tracking and orbital prediction
information to users and client applications in a variety of ways:
Through the system console
Through the command line
Through a network socket
Through the generation of audio speech
Data such as a spacecraft's sub-satellite point, azimuth and elevation
headings, Doppler shift, path loss, slant range, orbital altitude,
orbital velocity, footprint diameter, orbital phase (mean anomaly),
squint angle, eclipse depth, the time and date of the next AOS (or LOS
of the current pass), orbit number, and sunlight and visibility
information are provided on a real-time basis. PREDICT can also track
(or predict the position of) the Sun and Moon. PREDICT also has the
ability to control AZ/EL antenna rotators to maintain accurate
orientation in the direction of communication satellites. As an aid in
locating and tracking satellites through optical means, PREDICT can
articulate tracking coordinates and visibility information as plain
speech.
Trusted QSL V2.3.1 Release Notes
This version of Trusted QSL (TQSL) has new features as well as
corrections for defects found since TQSL 2.3 was
released. This release also includes an update to the most
recent TQSL configuration file.
TQSL 2.3.1 can be installed to upgrade any older version of TQSL.
On all three supported platforms (Windows, MacOS, and Linux),
installing TQSL 2.3.1 will replace older versions of Trusted
QSL while preserving your Callsign Certificates, Station
Locations, and preferences. On Windows, simply run the TQSL
2.3.1 installer, which will automatically uninstall older
versions of TQSL (and, if installed, TQSLCert). On Mac OS X,
open the disk image (.dmg) file and drag the “Trusted QSL”
folder to your Applications folder. Direct the installer to
“Replace All”, which will uninstall old files. For Linux
systems, unpack the tar file and read the INSTALL file for
directions.
TQSL 2.3 has been “localized” to allow use in the native
language of non-English speakers. This could not have been
done without the help of the volunteers who have contributed
translations for TQSL. Thanks to the following for their
assistance:
Chinese: Caros, BH4TXN
Finnish: Juhani, OH8MXL
German: Andreas DF4WC
Italian: Salvatore IV4FYV
Japanese: Akihiro JL3OXR
Portuguese: Nuno CT2IRY
Russian: Vic US5WE
Spanish: Jordi EA3GCV
The following list describes the major changes in the v2.3.1 release of Trusted QSL.
TQSL changes
Defects Corrected:
- Added 'Saving QSOs' to the messages to be translated.
- When renewing a callsign certificate and backing up to
earlier pages in the wizard, TQSL could display an unexpected
page for selecting the certificate type, which is not needed
for renewals. TQSL will no longer display the unexpected page.
- When editing an ADIF file that has an invalid mode setting,
TQSL now notifies the user that the mode is being ignored.
- For Unix systems, fix a defect that could cause the password
prompt to not appear when the system has built the wxWidgets
system with debug assertions enabled.
- Correct the invocation of the Windows Installer when an
update is available.
- Correct the counts reported when duplicate QSOs are found
along with QSOs with other errors.
- Fix formatting of the messages that appear when QSOs change
values in the station location for duplicate QSOs.
- Correct improperly formatted frequencies from ADIF files
(values like '7.010.20') to remove the extra periods.
- Revert the change that stripped spaces in the TQSL
configuration file as that caused newlines to be removed in
places like the station_data file.
- Fix "OpenSSL error - bad end line" by ensuring that there's
always a newline starting a new certificate.
Feature Additions:
- Add Finnish translation from Juhani, OH8MXL.
- Add the ADIF satellite name to the pulldown menu in the ADIF
editor to allow satellites to be more easily looked up.
- Allow 'LIGHT' in a Cabrillo file to represent 300 GHz and above.
- Allow TQSL to build against OpenSSL 1.1.0.
- Add the ability to pull DXCC Entity valid date ranges from the TQSL configuration file.
Reinstalling TQSL 2.3
Downgrading to TQSL 2.3 can be seamlessly performed by
uninstalling TQSL 2.3.1 and reinstalling TQSL 2.3.
(pkgsrc changes)
- All patches/* are dropped now.
(upstream)
Change Log for Releases
==============================
## 003.011.000.000
* N310: Added driver
* UBX: Add support for CAL antenna for Rev E
* Added the module peripheral manager (MPM) with all subcomponents (N310
drivers, mpm_shell, RPC server, BIST, etc.)
* UHD: Added rpclib as a internally tracked dependency
* UHD: Reduced the usage of Boost
* UHD: Updated uhd_images_downloader: Now uses more elaborate manifest to
optimize downloads
* UHD: Introduced uhdlib internal include paths
* UHD: Add support for configuration files. USRP settings can now be set using
a uhd.conf file in addition to device args
* UHD: Add narrow and narrow_cast
* gr-usrptest: Various bugfixes
* Updated required Vivado version to 2017.4
* Updated all license headers to use SPDX identifiers and correctly identify
Ettus Research as part of National Instruments
* This release includes all bugfixes and features from previous releases, in
particular, the 3.10.* release cycle
## 003.010.003.000
* X300
** Fix max rate calculation for 1 GbE
** Fix for DAC synchronization errors (unexpected FIFO depth)
** Reduced CPU usage during TX
* N230
** Properly initialize request structure before discovery
* B200
** FX3 firmware performance opitimizations
** Fixed sequence error on second TX burst
* TwinRX
** Added ADF5356 synth and Rev C support
* UBX
** Add implementation of TDD xcvr_mode and for TX PA on in TDD mode (to reduce transient on older revs)
** Add support for UBX-TDD
* C API
** Fixed dboard EEPROM revision error handling
** Make uhd_rx_streamer_last_error use SAFE_C
** Better error handling in uhd_usrp_get_[t/r]x_stream
* RFNoC
** Fix ctrl_iface to pop sequence numbers only after success
** Fix sequence number error message in ctrl_iface
** FPGA fix for sr_read() failure to ack errors
** FPGA fix for repeated sequence number for RX packets with 1 sample
** FPGA fix for axi_serializer edge case
* Docs
** Fixed B200 power LED description
** Update README application links
* UHD
** Utilize poll() instead of select() for UDP transports where possible to avoid descirptor limits
** Fix build with Boost 1.66
** Add EEPROM info to dboard_base class so daughterboard code can access all EEPROM info
## 003.010.002.000
* multi_usrp: Fixed get_normalized_tx_gain.
* E300: Fix for streamer recreation issue. Reduced minimum timeout, fixed
potential race condition.
* X300: Fix for network discovery, will now return early when correct serial is
found. Fixed issue with DAC sync. All async messages now go through
single DMA channel on PCIe. Improved TX performance. Fixed page size
acquisition for PCIe. Fixed some FW communication errors. Improved flow
control. Removed MTU throttling. Legacy compat falls back to min spp
for mixed transport types.
* CBX: Fixed LO LPF behaviour in 1.5-2 GHz range.
* UBX: Fixed dtor SIGABRT issue. Better error handling for various dboard clock
rates.
* TwinRX: Added LO reimport feature.
* GPSDO: Improved detection. Improved query_gpsdo sensor.
* RFNoC: Fixed issue with DDC and DUC command tick rate.
* UHD: Fixed potential memory leak in tasks. Fixed get_normalized_tx_gain().
Fixed default socket buffer size to honor MTU.
* Examples: Added channel param to samps to/from file. sync_to_gps exits
instead of uncaught throw. latency_test improved output. Use
next_pps in test_clock_synch. Added TwinRX FHSS example.
* Utils: Modified behaviour of uhd_images_downloader so it won't delete dirs
when using -i
* Tools: Updates to CHDR dissector. Added set_time_source_out(). Fixed LO API.
* C API: Fixed some missing fields in USRP info.
* Docs: Many minor fixes. Fixed Doxygen warnings related to /* in files.
* CMake: Fixed GCC 4.4 compilation issue. Added ability to specify package
names.
## 003.010.001.001
- Docs: The protocol for Gen-3 devices is now consistently referred to as CHDR.
- X300: Fixed EEPROM corruption bug (happened when two processes would access
find routines on the same device at the same time). Improved initialization
time. CE clock is now 214 MHz. Fixed channel list generation. Find routines
now more lenient in case one devices fails (others can still be found then).
Improve PCIe behaviour. Fix timed commands for non-TwinRX dboards. Improve
AXI Interconnect (faster, improved build timing).
- N230: Use second_addr (like X300).
- C API: Added UHD_VERSION macro. Fixed online rate change.
- Utils: Minor fixes to uhd_images_downloader.
- Build/CMake: Fixed some Py3k build issues. Fixed many compiler warnings. Allow
to specify package names.
- RFNoC: Fixed sampling rate mismatch error. Noc-Shell uses a non-cascaded 2-clk
FIFO. Increase default FIFO sizes on DUC and DDC blocks.
- UBX: Force on RX driver to eliminate transient.
- Transport code: Fixed memory leak.
- FPGA repository: Merged usrp3_rfnoc and usrp3 directories again. Cleaned up
superfluous files. Clean separation between Gen-3 and other devices in usrp3.
## 003.010.001.000
- Fixed multiple compiler warnings
- Multiple documentation fixes
- X300: RX strobe lines are always in sync on device initialization. DB EEPROM
now properly written. ignore-cal-file no longer ignored. Fixed case where too
large recv_frame_size settings could break things. Reduced ZPU clock speed
(helps FPGA timing). Added area constraints for AXI interconnect. Improved
halfband scaling in rx_frontend. Improved PCIe streaming reliability
- B2xx: Clear sequence numbers in idle state.
- RFNoC: Nodes disconnect on destruction. Fixed setting of correct bits on
sr_error_policy. DDC does no longer clear timed commands on EOB. DUC fixed
timed CORDIC tuning. Enable Noc-Shell response FIFOs (fixes simultaneous
commands on multiple channels).
- UBX: Changed default performance parameters
- TwinRX: LEDs properly light up depending on channels. Fixed issue of multiple
(redundant) writes. Simplified API steps for phase synchronization
- XCVR: Query dboard clock instead of DAC clock. Helps in X3x0s.
- GPS: Fixed message for case when no GPS is present. Fixed multiple GPS-related
issues.
- Converters: Fixed floating point rounding error in tests.
- Utils: uhd_usrp_probe can now query vectors
- Fixed issue that prevented soft_regs working on 32-bit systems
- Tools: Merged dissectors into common directory.
- CMake: -Og is the default now for gcc-based Debug builds.
## 003.010.000.000
- Changed version string to quadruplets (Major.API.ABI.Patch)
- Minimum dependencies bumped for gcc, Boost, CMake, clang and Python.
- TwinRX: Added support. Includes LO API for multi_usrp.
- N230: Added support
- Added expert framework
- X300: Completely restructured to use RFNoC
- X300: FPGA builds include git hash, dual 10GigE receive is now supported
(allows 2x200 Msps receive over 2x10GigE connections), DMA FIFO (over DRAM)
now part of builds, added Aurora support
- WBX: Fixed bug that prevented LO locking with 50 MHz ref clock
- pkg-config: Added boost_system
- Utils: uhd_usrp_probe can query sensors, query_gpsdo_sensors: minor fixes,
and cleanup
- Examples: Bugfixes in tx_waveforms, benchmark_rate measures timeouts,
- USB subsystem: Cleanups and minor bugfixes
- Added devtest infrastructure
- Converters: Added s8 and s16 data types
- Added more aggressive optimization strategies for FPGA builds
- Xilinx IP tool upgrade scripts cleaned up
## 003.009.005
- B200: Update DSPs after changing tick rate
- X300: Added option to disable ADC self test, prevent DAC from
underrunning
- UBX: Fixed noise issues, reduced power consumption/heat, added codes for
upcoming board revisions, force RX LNAs on (reduces rx settling time)
- WBX: Fixed rev2 and rev3 boards on X300
- Utils/Examples: Cleaned up query_gpsdo_sensors, test_dboard_coercion,
- Manual: Minor fixes and updates
- CMake: Fix lib64 detection, better platform detection, Doxygen may use shorter
filenames
- Octoclock: GPSDO-related fixes, sequence number consistency fixes, UART
fixes (off-by-one errors). uhd_usrp_probe will pick up an OC now,
added Wireshark dissector for OC packets
PR pkg/52969:
With the boost libs updated to 2.6 there are changes so that socket->native()
is no longer supported. use socket->native_handle() instead
=Version 4.0.16=
2018-02-08 David Freese <w1hkj@bellsouth.net>
54c63f9: wo seg fault
8fa88c7: 8psk lockup problem
45a8991: Miscellaneous menu
8ff1cd6: pskrep autostart
4a78b53: OS X build script
487db95: Grid Square Contest
8c36d5f: Logbook Export
2018-01-28 Haris Andrianos <sv1grb@gmail.com>
6c19a62: Greek translation update
2018-01-24 David Freese <w1hkj@bellsouth.net>
dc384c6: Alert timeouts
af04127: video
=Version 4.0.15=
2018-01-18 David Freese <w1hkj@bellsouth.net>
e87f41a: ARQ server
5ab6914: Signal gain
=Version 4.0.14=
f799522: linux shutdown
29593c8: remote logbook
4e87d16: ARQ exit seg fault
2018-01-09 Stelian Pop <stelian@popies.net>
e09d167: WEFAX auto center behavior
be34220: WEFAX phasing change button
2dee90e: RTTY configure initializers
2018-01-07 David Freese <w1hkj@bellsouth.net>
a5e88af: File aging
f028159: OS X shutdown
38b294a: PSK IMD
a7d67d8: Spectrum Display
daa6d43: Warnings in sound.cxx
eb0caa4: OS X app paradigm
The actual fix as been done by "pkglint -F */*/buildlink3.mk", and was
reviewed manually.
There are some .include lines that still are indented with zero spaces
although the surrounding .if is indented. This is existing practice.
Unsorted entries in PLIST files have generated a pkglint warning for at
least 12 years. Somewhat more recently, pkglint has learned to sort
PLIST files automatically. Since pkglint 5.4.23, the sorting is only
done in obvious, simple cases. These have been applied by running:
pkglint -Cnone,PLIST -Wnone,plist-sort -r -F
The actual cleanup has been done by pkglint:
* Added missing identifier comments
* Replaced ${PKGMANDIR} with a simple man, since the infrastructure does
all the magic for PLISTs
- Changes for xlog version 2.0.15 - 2017-nov-08
* Clean up warnings reported by user from a macOS build
* Updated cty.dat to 20171030
* 60m is now consistently referred to as "5" (not 5.2 or 5.3)
* Upgraded to ADIF version 3.0.6
* Cleaned up Glib Critical and Glib Warnings (that I could create)
* Added all modes and submodes
* ADIF3 output is now supported, ADIF2 output has been removed
* ADIF Import has been updated
* added adif_ok to xlog.cfg to indicate ADIF3 update of bands,
modes, and scoringbands has oc curred
* Users will see new defaults restored if they have customized via:
Settings->Dialogs->Scoring
Settings->Preferences->General comma separated list of modes
Settings->Preferences->General comma separated list of bands
* Fixed bands in scoring window
* Added feature: sort log by callsign
Version 3.1
2016-12-31
* Fix kenwood_set_mode for ts590s and mode CW, RTTY or AM.
Tks Tom, DL1JBE
* Proper IPV6 and dual stack networking. Bill, G4WJS
* Add a new command line option '--no-restore-ai' ('-n') to rigctl.
Bill, G4WJS
* Fix missing PKTUSB mode setting code for FT-817 & FT-897. Bill, G4WJS
* New Prosistel rotor backend from IZ7CRX
* Install daemon man files to man1. Nate, N0NB
* Migrate from libusb-0.1 to libusb-1.0. Stephane, F8CFE
* Added support for Icom IC-2730. robinolejnik
* Added support for the Icom IC-7300. Mike, W9MDB
* Add send_morse to icom rigs. Mike, W9MDB
* added instructions how to compile on OSX. DH1TW
* New Perseus model. Stephane, F8CFE
* Added Lua binding and demo script. Ervin, HA2OS
* Added test to support Flex 6300. Bill, KB4AAA
* Many bug fixes and feature enhancements to the code base. See the
Git commit log for complete details.
