Version 0.35.3
* Check for leftout files in builddir, for for generated files (Rodney Dawes)
* Load POTFILES.{skip,ignore} from $SRCDIR in intltool-update
-- bug #391892 (Rodney Dawes)
* Ignore files in POTFILES.{skip,ignore} when looking for leftout files
-- bug #391892 (Rodney Dawes)
* Match $LINGUAS with LINGUAS file more precisely
-- bug #342500 (Jürg Billeter)
Version 0.35.2
* Create builddir if it doesn't exist when generating header files
-- bug #348952 (Rodney Dawes)
* Update checks for leftout files with intltool-update -m
-- bug #386118 (Rodney Dawes)
* Better support for using $srcdir (Rodney Dawes)
* Run intltool-update -m in make check (Rodney Dawes)
* Handle LINGUAS environment variable properly
-- bug #342500 (Rodney Dawes)
* Make sure that we always call FindPackageName so variables get set properly
-- bug #350013 (Rodney Dawes)
* Set $top_builddir in Makefile.in.in for stamp-it rule
-- bug #345560 (Daniel Leidert)
changes:
-Make regex patterns greedier, to avoid perl stack overflows
-Add code to detect DATADIRNAME
-Support older/non-GNU versions of diff when validating tests
-Add new mode to support quoted text in any file
-Fix the warning message for missing IT_PROG_INTLTOOL and error out
to generate less back tracing. On DragonFly 1.6 (but not 1.4) Perl
would hit the stack size in wm/metacity's dz.po otherwise.
Thanks to walt <wa1ter@myrealbox.com> for the tracing down the faulting
expression.
Bump revision.
Version 0.35.0
* Support for MSGID_BUGS_ADDRESS variable in Makevars and for xgettext
-- bug #329346 (Dwayne Bailey, Rodney Dawes)
* Support for po/LINGUAS file being preferred over ALL_LINGUAS variable
-- bugs #341508#339770 (Rodney Dawes)
* Support micro-version when validating version requirements
-- bug #339627 (Rodney Dawes)
* Clean up Makefile.in.in to remove useless bits
-- bug #338817 (Rodney Dawes)
* Change WARNING to NOTICE for non-UTF-8 po file encodings
-- bug #331046 (Rodney Dawes)
* Add MAINTAINERS file
-- bug #335025 (Danilo Segan)
* Work around recursive variable resolution in intltool-update
-- bug #321785 (Danilo Segan)
* Work around variable stripping in Makefile.in.in substitution
-- bug #330509 (Rodney Dawes)
March, the bumps for the updated expat never saw this package
because it depend on it directly instead of using buildlink3.mk files.
This fixes build problem where you could be attempting to install
intltool with new expat and old p5-XML-Parser.
RECOMMENDED is removed. It becomes ABI_DEPENDS.
BUILDLINK_RECOMMENDED.foo becomes BUILDLINK_ABI_DEPENDS.foo.
BUILDLINK_DEPENDS.foo becomes BUILDLINK_API_DEPENDS.foo.
BUILDLINK_DEPENDS does not change.
IGNORE_RECOMMENDED (which defaulted to "no") becomes USE_ABI_DEPENDS
which defaults to "yes".
Added to obsolete.mk checking for IGNORE_RECOMMENDED.
I did not manually go through and fix any aesthetic tab/spacing issues.
I have tested the above patch on DragonFly building and packaging
subversion and pkglint and their many dependencies.
I have also tested USE_ABI_DEPENDS=no on my NetBSD workstation (where I
have used IGNORE_RECOMMENDED for a long time). I have been an active user
of IGNORE_RECOMMENDED since it was available.
As suggested, I removed the documentation sentences suggesting bumping for
"security" issues.
As discussed on tech-pkg.
I will commit to revbump, pkglint, pkg_install, createbuildlink separately.
Note that if you use wip, it will fail! I will commit to pkgsrc-wip
later (within day).
developer is officially maintaining the package.
The rationale for changing this from "tech-pkg" to "pkgsrc-users" is
that it implies that any user can try to maintain the package (by
submitting patches to the mailing list). Since the folks most likely
to care about the package are the folks that want to use it or are
already using it, this would leverage the energy of users who aren't
developers.
Version 0.34.1
* automake/autoconf fixes and improvements
(Rodney Dawes, Stepan Kasal)
* extraction of XML attributes fixed
(Danilo Segan)
Version 0.34
* Fix the regex for stripping the intltool type tags in POTFILES.in
-- bug #171330 (Stepan Kasal)
* Add notice about using DISTCLEANFILES for toplevel Makefile.am
-- bug #309455 (Tim-Philipp Muller)
* Discard not-well-formed translations when merging XML
-- bug #170471 (Danilo Segan)
* Correct handling of xml:space inheritance
-- bug #160262 (Danilo Segan)
* Merge multiple comments for the same string in XML files
-- bug #171579 (Danilo Segan)
* Update sed script to be more practictal for translatable XML
-- bug #304365 (Nickolay V. Shmyrev)
* Support disting files that may not exist for all packages via EXTRA_DISTFILES
-- bugs #168788 and #171327 (Rodney Dawes)
* Do not create the pot file during dist, but do build it for check
(Stepan Kasal)
* Add support for use on win32 native perl (Tor Lillqvist)
* Do not dist .gmo files, and remove them with distclean
Remove Makefile.in.in with maintainer-clean
-- bug #166724 (Rodney Dawes)
* Minor fixes to Makefile.in.in (Stepan Kasal)
* Use --verbose instead of --statistics for msgfmt
-- bug #165881
* Remove the need for patching Makefile.in.in and just copy in our own
-- bug #165066 (Rodney Dawes)
* Fix support for srcdir != builddir during make dist/distcheck
-- bug #159846 (Rodney Dawes)
* Ignore empty strings in XML files that are marked for translation
-- bug #163689 (Miloslav Trmac)
* Add support for AC_CONFIG_MACRO_DIR to intltoolize
-- bug #160943 (James Henstridge)
* Re-implement "echo -n" in perl for portability
-- bug #162027 (Rodney Dawes)
* Fix local mode
-- bug #163981 (Jeremy Katz)
* Fix nested XML tags translation when only attributes are marked for
translation in a tag
-- bug #159511 (Danilo Segan)
* Use # as sed separator and prefix gettext variable names with INTLTOOL
-- bug #156454 (Rodney Dawes)
* Update serial and serial comparison check for IT_PROG_INTLTOOL to 2
(Rodney Dawes)
* Support CDATA sections in XML files
-- bug #157718 (Danilo Segan, Rodney Dawes)
probably have to resurrect the old xml-i18n-tools package:
Version 0.32.1
* Deprecate --pass-through option, default to UTF-8 for anything
except RFC822 files
-- bug #145017 (Danilo Segan)
* Add support for .icon files
-- bug #157412 (Takao Fujiwara, Rodney Dawes)
Version 0.32
* Check to avoid whining about {arch} and $PACKAGE-$VERSION dist directories
when looking for files missing from POTFILES.in
-- bug #157278 (Rodney Dawes)
* Deprecate AC_PROG_INTLTOOL for IT_PROG_INTLTOOL
-- bug #151508 (Rodney Dawes)
* Add new INTLTOOL_XML_NOMERGE_RULE for translating XML files without
merging the translations back into the output XML file
-- bug #155842 (Rodney Dawes)
* Fix new Makefile.in.in stuff to work with automake 1.4
-- bug #157298 (Rodney Dawes)
* Update I18N-HOWTO for the changes to use our own Makefile.in.in
-- bug #79598 (Rodney Dawes)
* Allow use of either AM_GNU_GETTEXT or AM_GLIB_GNU_GETTEXT and use our
own Makefile.in.in instead of trying to patch one
-- bug #144715 (Rodney Dawes)
* Handle all supported gettext escape sequences in PO files
-- bug #48489 (Danilo Segan)
* Fix Scheme string extraction, add support for translators' comments
-- bug #137029 (Danilo Segan)
* Fix translations of attributes of XML elements
-- bug #155843 (Danilo Segan)
* Support for translators' comments in Glade files
-- bug #155294 (Danilo Segan)
* Fix paths and quoting for intltool script variables in intltool.m4
-- bug #154717 (James Henstridge, Rodney Dawes)
* Fix merging of xml:space="preserve" tags
-- bug #151017 (Danilo Segan).
* Look for Q_() keyword as well
-- bug #154063 (Danilo Segan).
in the process. (More information on tech-pkg.)
Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.
Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.
we were running intltoolize before the configure stage, which replaced all
intltool-*.in files with symlinks to the ones installed by this package.
However, the new version of intltool, 0.31.3, has added new substitution
patterns to the scripts, which must be replaced by configure scripts at
configuration time. The problem is that old configure scripts (pre-0.31.3)
do not know about these patterns, which results in them not being substituted,
thus causing build failures.
So, to fix this issue, replace all intltool-* files _after_ the configure
stage, just like we do with libtool. Additional patters might be added
through the INTLTOOL_OVERRIDE variable, but I doubt this will be needed).
While here, update the dependency to 0.31.3 (has no other effect, as this
package is only used at build time by other packages).
when needed) is correct but... no answers in tech-pkg@ for several days.
* Use absolute paths and allow env var overrides for gettext scripts
-- bug #152020 (Rodney Dawes)
* Allow shell-backticks (and other shell features) in variable names
-- bug #152448 (Danilo Segan)
* Fix typographical error in intltool.m4
-- bug #153630 (Rodney Dawes)
Version 0.31.2
* Handle package name extraction better
-- bug #144725 (Daniel Elstner)
* Support for comments before translatable attributes in XML files,
support for translating both tag content and attributes
-- bug #143581. (Danilo Segan)
Version 0.31.1
* Switch to gnome-common for autogen.sh so we can detect automake
versions better -- bug #145027 (Jordi Mallach)
utility to obsolete the standalone xml-i18n-tools package.
Changes since 0.30:
* Usage of [no-xml] option in AC_PROG_INTLTOOL to avoid requiring
XML::Parser Perl module. (Rodney Dawes)
* Support for C#. (Rodney)
* Support for running intltool-update without autoconf, or with
po/Makevars file (as used in gettext). (Danilo Segan)
* New XML merging (compatible with pre-0.27.2 intltool) -- bug
#130802 -- entity decoding and encoding is not done anymore for
XML. (Danilo)
* Multiple-output XML merging now produces simpler files, and sets
"xml:lang" only when translation is used -- bug #46650. (Danilo)
* Support for passing comments to translators from XML and GConf
schema files. (Danilo)
* Many bug fixes (Rodney, Danilo, Callum McKenzie)
by moving the inclusion of buildlink3.mk files outside of the protected
region. This bug would be seen by users that have set PREFER_PKGSRC
or PREFER_NATIVE to non-default values.
BUILDLINK_PACKAGES should be ordered so that for any package in the
list, that package doesn't depend on any packages to the left of it
in the list. This ordering property is used to check for builtin
packages in the correct order. The problem was that including a
buildlink3.mk file for <pkg> correctly ensured that <pkg> was removed
from BUILDLINK_PACKAGES and appended to the end. However, since the
inclusion of any other buildlink3.mk files within that buildlink3.mk
was in a region that was protected against multiple inclusion, those
dependencies weren't also moved to the end of BUILDLINK_PACKAGES.
Approved by wiz@.
Changes since 0.28:
Version 0.30
* added missing [] quotation macro name defined in AC_DEFUN()
(Tomasz Kloczko)
* Handle embedded newlines thereby avoiding the silent corruption of
files. (Morten Welinder)
* Now intltool-merge does not compress whitespace in attributes
and CDATA. (Brian Cameron)
* Now intltool-merge supports dashes in attribute names, and supports
attributes delimited by single quotes. (Brian Cameron)
* Misc small fixes (Kenneth Chr., Danilo Segan)
Version 0.29
* Removed OrigTree in favor of more simply setting handlers directly
in intltool-merge (Brian Cameron)
* Work correctly with AC_CONFIG_AUX_DIR (Thomas Vander Stichele,
Chee Bin HOH and Kees Cook)
* Make intltoolize return a correct exit status (Thomas Vander Stichele)
* Fix usage of a bash-ism (Morten Welinder, Jonathan Blandford)
* Translate GenericName in .desktop files (Kenneth Rohde Christiansen)
* Framework to allow each format have inline comments (Denis Barbier)
* Add $XGETTEXT_ARGS to allow passing extra args to xgettext (Danilo Segan)
* Added support for .kbd files (Kenneth Rohde Christiansen)
* Add $XGETTEXT_KEYWORDS to allow the use of other keywords (Danilo Segan)
* Misc bug fixes (Noah Levitt, Tommi Komulainen)
* made intltool-merge use XML::Parser (#116526 and others) [Brian Cameron]
- added and updated tests
- updated so that intltool-merge doesn't add a trailing '\n'
character to CDATA values.
- Corrected the logic of encoding/decoding the string
before/after translation.
- Added it to build, made it install (Kenneth Christiansen)
- Added missing DESTDIR (Abel Cheung)
- Also nstall OrigTree.pm in the distribution tree (Malcolm Tredinnick)
- Check for the XML::Parser module at build time (Malcolm Tredinnick)
* Added INTLTOOL_KBD_RULE for GOK\s *.kdb files (Bill Haneman)
* Added --multiple-output option (Kenneth Christiansen)
* Avoid bashism in xgettext version check. (#120267) (Abel Cheung)
* Handle standard GNU gettext 0.12 and 0.13 installations (Malcolm Tredinnick)
* Fix the running of test 18 (multiple output test) (Malcolm Tredinnick)
Changes:
* Fixed the source code encoding mark at POTFILES.in support (Abel Cheung).
* Fixed the intltool.spec file so it can build RPMs with this release (it was
only a package issue (Carlos Perell\xc3\xb3 Mar\xc3\xadn)
- Fixed .xam support (Abel Cheung)
- Fixed intltool-update, it's not usable with 0.27 :-( (Carlos Perelló Marín)
- intltool-update -m tells you about files that are at POTFILES.in but does not
exists anymore (Abel Cheung)
- Small scheme support fixes (Callum McKenzie)
- Added support for .lang files (Gustavo Giraldez)
- Added support for .xam files (Abel Cheung)
- Updated I18N-HOWTO (Kenneth, Bruno Haible)
- Updated all manual pages and command help (Abel Cheung)
- Improved the package name detection code (Abel Cheung)
- better .server files handling (Abel Cheung)
- source code with non-ASCII chars support with
GNU gettext 0.12 (bug #99005, Abel Cheung, Carlos Perelló Marín)
- intltool-unicodify is deprecated, please use msgconv (Abel Cheung)
- Handle no translations in get_newest_po_age (Rodney Dawes)
- Cleaned up tests and fixed few bugs (Kenneth)
- Send error messages to stderr, and fix other similar bugs (bug #105013,
Denis Barbier)
- handle using a different output file. (James Henstridge)
- Correct the invocation of INTLTOOL_MERGE. (bug #106898, Malcolm Tredinnick)
- Extract attributes in XML when there are spaces arount the equal sign
(Alberto Manuel Brand?o Sim?es)
- use iconv -f, instead of iconv --f (bug #105181, Hidetoshi Tajima)
- Added variable substitution. (Kenneth)
- Added small section for packages not using the aufo* tools (Kenneth)
- Call msgmerge with options before non-options to fix potential non-GNU
getopt issues. (Gregory Stark, Jordi Mallach)
- Make it work when running an UTF-8 locale (Kenneth)
- Fix some iconv/charset issues (bug #113121, Morten Welinder)