Problems found with existing digests:
Package fotoxx distfile fotoxx-14.03.1.tar.gz
ac2033f87de2c23941261f7c50160cddf872c110 [recorded]
118e98a8cc0414676b3c4d37b8df407c28a1407c [calculated]
Package ploticus-examples distfile ploticus-2.00/plnode200.tar.gz
34274a03d0c41fae5690633663e3d4114b9d7a6d [recorded]
da39a3ee5e6b4b0d3255bfef95601890afd80709 [calculated]
Problems found locating distfiles:
Package AfterShotPro: missing distfile AfterShotPro-1.1.0.30/AfterShotPro_i386.deb
Package pgraf: missing distfile pgraf-20010131.tar.gz
Package qvplay: missing distfile qvplay-0.95.tar.gz
Otherwise, existing SHA1 digests verified and found to be the same on
the machine holding the existing distfiles (morden). All existing
SHA1 digests retained for now as an audit trail.
to address issues with NetBSD-6(and earlier)'s fontconfig not being
new enough for pango.
While doing that, also bump freetype2 dependency to current pkgsrc
version.
Suggested by tron in PR 47882
alternative from mk/jpeg.buildlink3.mk
This allows selection of an alternative jpeg library (namely the x86 MMX,
SSE, SSE2 accelerated libjpeg-turbo) via JPEG_DEFAULT=libjpeg-turbo, and
follows the current standard model for alternatives (fam, motif, fuse etc).
The mechanical edits were applied via the following script:
#!/bin/sh
for d in */*; do
[ -d "$d" ] || continue
for i in "$d/"Makefile* "$d/"*.mk; do
case "$i" in *.orig|*"*"*) continue;; esac
out="$d/x"
sed -e 's;graphics/jpeg/buildlink3\.mk;mk/jpeg.buildlink3.mk;g' \
-e 's;BUILDLINK_PREFIX\.jpeg;JPEGBASE;g' \
< "$i" > "$out"
if cmp -s "$i" "$out"; then
rm -f "$out"
else
echo "Edited $i"
mv -f "$i" "$i.orig" && mv "$out" "$i"
fi
done
done
This changes the buildlink3.mk files to use an include guard for the
recursive include. The use of BUILDLINK_DEPTH, BUILDLINK_DEPENDS,
BUILDLINK_PACKAGES and BUILDLINK_ORDER is handled by a single new
variable BUILDLINK_TREE. Each buildlink3.mk file adds a pair of
enter/exit marker, which can be used to reconstruct the tree and
to determine first level includes. Avoiding := for large variables
(BUILDLINK_ORDER) speeds up parse time as += has linear complexity.
The include guard reduces system time by avoiding reading files over and
over again. For complex packages this reduces both %user and %sys time to
half of the former time.
"A vulnerability in libwmf can be potentially exploited by malicious
people to compromise an application using the vulnerable library.
The vulnerability is caused due to an integer overflow error when
allocating memory based on a value taken directly from a WMF file
without performing any checks. This can be exploited to cause a
heap-based buffer overflow when a specially crafted WMF file is
processed.
Successful exploitation may allow execution of arbitrary code."
http://secunia.com/advisories/20921/http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-3376
Patch from Red Hat. Bump PKGREVISION.
and add a new helper target and script, "show-buildlink3", that outputs
a listing of the buildlink3.mk files included as well as the depth at
which they are included.
For example, "make show-buildlink3" in fonts/Xft2 displays:
zlib
fontconfig
iconv
zlib
freetype2
expat
freetype2
Xrender
renderproto
RECOMMENDED is removed. It becomes ABI_DEPENDS.
BUILDLINK_RECOMMENDED.foo becomes BUILDLINK_ABI_DEPENDS.foo.
BUILDLINK_DEPENDS.foo becomes BUILDLINK_API_DEPENDS.foo.
BUILDLINK_DEPENDS does not change.
IGNORE_RECOMMENDED (which defaulted to "no") becomes USE_ABI_DEPENDS
which defaults to "yes".
Added to obsolete.mk checking for IGNORE_RECOMMENDED.
I did not manually go through and fix any aesthetic tab/spacing issues.
I have tested the above patch on DragonFly building and packaging
subversion and pkglint and their many dependencies.
I have also tested USE_ABI_DEPENDS=no on my NetBSD workstation (where I
have used IGNORE_RECOMMENDED for a long time). I have been an active user
of IGNORE_RECOMMENDED since it was available.
As suggested, I removed the documentation sentences suggesting bumping for
"security" issues.
As discussed on tech-pkg.
I will commit to revbump, pkglint, pkg_install, createbuildlink separately.
Note that if you use wip, it will fail! I will commit to pkgsrc-wip
later (within day).
* 3 patches from Caolan at RedHat: remove unnecessary extra linked
libs; remove some warnings; rh154813 which (same redhat issuzilla
bug id) I theorize fixes some upsidedown wmfs.
Several changes are involved since they are all interrelated. These
changes affect about 1000 files.
The first major change is rewriting bsd.builtin.mk as well as all of
the builtin.mk files to follow the new example in bsd.builtin.mk.
The loop to include all of the builtin.mk files needed by the package
is moved from bsd.builtin.mk and into bsd.buildlink3.mk. bsd.builtin.mk
is now included by each of the individual builtin.mk files and provides
some common logic for all of the builtin.mk files. Currently, this
includes the computation for whether the native or pkgsrc version of
the package is preferred. This causes USE_BUILTIN.* to be correctly
set when one builtin.mk file includes another.
The second major change is teach the builtin.mk files to consider
files under ${LOCALBASE} to be from pkgsrc-controlled packages. Most
of the builtin.mk files test for the presence of built-in software by
checking for the existence of certain files, e.g. <pthread.h>, and we
now assume that if that file is under ${LOCALBASE}, then it must be
from pkgsrc. This modification is a nod toward LOCALBASE=/usr. The
exceptions to this new check are the X11 distribution packages, which
are handled specially as noted below.
The third major change is providing builtin.mk and version.mk files
for each of the X11 distribution packages in pkgsrc. The builtin.mk
file can detect whether the native X11 distribution is the same as
the one provided by pkgsrc, and the version.mk file computes the
version of the X11 distribution package, whether it's built-in or not.
The fourth major change is that the buildlink3.mk files for X11 packages
that install parts which are part of X11 distribution packages, e.g.
Xpm, Xcursor, etc., now use imake to query the X11 distribution for
whether the software is already provided by the X11 distribution.
This is more accurate than grepping for a symbol name in the imake
config files. Using imake required sprinkling various builtin-imake.mk
helper files into pkgsrc directories. These files are used as input
to imake since imake can't use stdin for that purpose.
The fifth major change is in how packages note that they use X11.
Instead of setting USE_X11, package Makefiles should now include
x11.buildlink3.mk instead. This causes the X11 package buildlink3
and builtin logic to be executed at the correct place for buildlink3.mk
and builtin.mk files that previously set USE_X11, and fixes packages
that relied on buildlink3.mk files to implicitly note that X11 is
needed. Package buildlink3.mk should also include x11.buildlink3.mk
when linking against the package libraries requires also linking
against the X11 libraries. Where it was obvious, redundant inclusions
of x11.buildlink3.mk have been removed.
in the process. (More information on tech-pkg.)
Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.
Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.
All library names listed by *.la files no longer need to be listed
in the PLIST, e.g., instead of:
lib/libfoo.a
lib/libfoo.la
lib/libfoo.so
lib/libfoo.so.0
lib/libfoo.so.0.1
one simply needs:
lib/libfoo.la
and bsd.pkg.mk will automatically ensure that the additional library
names are listed in the installed package +CONTENTS file.
Also make LIBTOOLIZE_PLIST default to "yes".
CygWin changes mostly (all thanks to Tor Lillqvist), though build-tools
updates may make it build better on various systems. Has been tested by
various people since February; thought it was well-past time to release
this properly...
ChangeLog says:
* configure.ac: Don't use -lm on Windows. mingw has an (empty)
dummy libm, but it confuses libtool.) [Tor Lillqvist <tml@iki.fi>]
* libwm-config.in: Make installation-location-independent when run
in a Cygwin shell. [Tor Lillqvist <tml@iki.fi>]
* src/Makefile.am: Don't use -lm on Windows. Add libwmflite.la to
io_wmf_la_LIBADD. [Tor Lillqvist <tml@iki.fi>]
* src/wmf.c: Don't use hardcoded path for WMF_FONTDIR on Windows.
Instead, assume being built as a DLL, and look up the DLL
location in a DllMain routine, and use that to build the font
directory path at run-time. [Tor Lillqvist <tml@iki.fi>]
* src/font.c: Don't use hardcoded path for WMF_XTRA_FONTMAP either.
(remap_font_file_name): On Windows, if a font file name starts
with the build-time prefix, replace that with the run-time
installation prefix. [Tor Lillqvist <tml@iki.fi>]
I have been using this in my pkgsrc one a few systems for maybe two
months.
