Transmission is a free, lightweight BitTorrent client. It features
a simple, intuitive interface on top on an efficient, cross-platform
back-end.
This package includes the qt and gtk frontends for Transmission
Chngelog:
Changes
-------
* Supported network-path reference in HTTP redirect.
* Updated bash_completion.
* aria2 now doesn't assume download has completed just because file
size matched. The only exception is zero-length file. If server
tells that file is zero-length and --checksum option is given,
aria2 now correctly checks its checksum. There is one known issue:
If downloaded file is zero-length file and .aria2 file exists, it
will not be deleted on successful verification, because .aria2 file
is not loaded.
* Fixed the bug that --checksum is not working. SFBUG#3466888
* Fixed compile error without libnettle, libgcrypt and openssl.
SFBUG#3466463
* Fixed the bug that log file is not created if there is warning
before log file is opened.
Alwo update isc-dhclient4, isc-dhcpd4 and isc-dhcrelay4.
Changes since 4.2.3-P1
! Modify the DDNS handling code. In a previous patch we added logging
code to the DDNS handling. This code included a bug that caused it
to attempt to dereference a NULL pointer and eventually segfault.
While reviewing the code as we addressed this problem, we determined
that some of the updates to the lease structures would not work as
planned since the structures being updated were in the process of
being freed: these updates were removed. In addition we removed an
incorrect call to the DDNS removal function that could cause a failure
during the removal of DDNS information from the DNS server.
Thanks to Jasper Jongmans for reporting this issue.
[ISC-Bugs #27078]
CVE: CVE-2011-4868
1.) Set minimum required GCC version to 4.1.3 because that is what has
been tested. Based on the bug-report it also seems that GCC 4.0.1
doesn't work.
2.) GCC 4.1.3 (as distributed with NetBSD 5.*) works fine under
NetBSD/macppc as reported by Matthias Kretschmer on IRCnet.
So don't insist on GCC 4.2.1 for this platform. This fixes seems
to fix the build as the GCC 4.4.6 package doesn't build for
this platform.
- Bug Fixes
The following vulnerabilities have been fixed.
o wnpa-sec-2012-01
Laurent Butti discovered that Wireshark failed to properly
check record sizes for many packet capture file formats. (Bug
6663, bug 6666, bug 6667, bug 6668, bug 6669, bug 6670)
Versions affected: 1.4.0 to 1.4.10, 1.6.0 to 1.6.4.
o wnpa-sec-2012-02
Wireshark could dereference a NULL pointer and crash. (Bug
6634)
Versions affected: 1.4.0 to 1.4.10, 1.6.0 to 1.6.4.
o wnpa-sec-2012-03
The RLC dissector could overflow a buffer. (Bug 6391)
Versions affected: 1.4.0 to 1.4.10, 1.6.0 to 1.6.4.
The following bugs have been fixed:
o "Closing File!" Dialog Hangs. (Bug 3046)
o Sub-fields of data field should appear in exported PDML as
children of the data field instead of as siblings to it. (Bug
3809)
o Incorrect time differences displayed with time reference set.
(Bug 5580)
o Wrong packet type association of SNMP trap after TFTP
transfer. (Bug 5727)
o SSL/TLS decryption needs wireshark to be rebooted. (Bug 6032)
o Export HTTP Objects -> save all crashes Wireshark. (Bug 6250)
o Wireshark Netflow dissector complains there is no template
found though the template is exported. (Bug 6325)
o DCERPC EPM tower UUID must be interpreted always as little
endian. (Bug 6368)
o Crash if no recent files. (Bug 6549)
o IPv6 frame containing routing header with 0 segments left
calculates wrong UDP checksum. (Bug 6560)
o IPv4 UDP/TCP Checksum incorrect if routing header present.
(Bug 6561)
o Incorrect Parsing of SCPS Capabilities Option introduced in
response to bug 6194. (Bug 6562)
o Various crashes after loading NetMon2.x capture file. (Bug
6578)
o Fixed compilation of dumpcap on some systems (when
MUST_DO_SELECT is defined). (Bug 6614)
o SIGSEGV in SVN 40046. (Bug 6634)
o Wireshark dissects TCP option 25 as an "April 1" option. (Bug
6643)
o ZigBee ZCL Dissector reports invalid status. (Bug 6649)
o ICMPv6 DNSSL option malformed on padding. (Bug 6660)
o Wrong tvb_get_bits function call in packet-csn1.c. (Bug 6708)
o [UDP] - Length Field of Pseudo Header while computing CheckSum
is not correct. (Bug 6711)
o pcapio.c: bug in libpcap_write_interface_description_block.
(Bug 6719)
o Memory leaks in various dissectors.
o Bytes highlighted in wrong Byte pane when field selected in
Details pane.
- Updated Protocol Support
BGP, BMC CSN1, DCERPC EPM, DCP(ETSI) DMP DTLS GSM Management, H245
HPTEAM, ICMPv6, IEEE 802.15.4 IPSEC IPv4, IPv6, ISAKMP KERBEROS
LDSS NFS RLC, RPC-NETLOGON RRC RTMPT SIGCOMP SSL SYSLOG TCP, UDP,
XML ZigBee ZCL
- New and Updated Capture File Support
Accellent 5Views, AIX iptrace, HP-UX nettl, I4B, Microsoft Network
Monitor, Novell LANalyzer, PacketLogger, Pcap-ng, Sniffer,
Tektronix K12, WildPackets {Airo,Ether}Peek.
The Radicale Project is a complete CalDAV calendar server solution.
It can store multiple calendars.
Calendars are available for both local and remote access, possibly
limited through authentication policies. They can be viewed and
edited by calendar clients on mobile phones or computers. Technical
Description
Radicale aims to be a light solution, easy to use, easy to install,
easy to configure. As a consequence, it requires few software
dependencies and is pre-configured to work out-of-the-box.
arp-scan is a command-line tool for system discovery and fingerprinting.
It constructs and sends ARP requests to the specified IP addresses,
and displays any responses that are received.
arp-scan allows you to:
* Send ARP packets to any number of destination hosts, using a
configurable output bandwidth or packet rate.
* Construct the outgoing ARP packet in a flexible way.
* Decode and display any returned packets.
* Fingerprint IP hosts using the arp-fingerprint tool.
Calypso is a CalDAV/CardDAV server on Linux.
Calypso works with evolution, iceowl and the Android CalDAV/CardDAV
plugins. It does not yet work with aCal; for some reason aCal cannot
find any calendars on the server.
Calypso also supports importing calendar changes from the command
line, allowing you to integrate support into a text-based email
application like notmuch or mutt.
Feature improvements
* Updates to dictionary.erx, dictionary.siemens, dictionary.starent,
dictionary.starent.vsa1, dictionary.zyxel, added dictionary.symbol
* Added support for PCRE from Phil Mayers
* Configurable file permission in rlm_linelog
* Added "relaxed" option to rlm_attr_filter. This copies attributes if at least
one match occurred.
* Added documentation on dynamic clients. See raddb/modules/dynamic_clients.
* Added support for elliptical curve cryptography. See ecdh_curve in
raddb/eap.conf.
* Added support for 802.1X MIBs in checkrad
* Added support for %{rand:...}, which generates a uniformly distributed number
between 0 and the number you specify.
* Created "man" pages for all installed commands, and documented options for all
commands. Patch from John Dennis.
* Allow radsniff to decode encrypted VSAs and CoA packets.
* Always send Message-Authenticator in radtest.
* Updated Oracle schema and queries
* Added SecurID module. See src/modules/rlm_securid/README
Bug fixes
* Fix memory leak in rlm_detail
* Fix "failed to insert event"
* Allow virtual servers to be reloaded on HUP. It no longer complains about
duplicate virtual servers.
* Fix %{string:...} expansion
* Fix "server closed socket" loop in radmin
* Set ownership of control socket when starting up
* Always allow root to connect to control socket, even if "uid" is set. They're
root. They can already do anything.
* Save all attributes in Access-Accept when proxying inner-tunnel EAP-MSCHAPv2
* Fixes for DHCP relaying.
* Check certificate validity when using OCSP.
* Updated Oracle "configure" script
* Fixed typos in dictionary.alvarion
* WARNING on potential proxy loop.
* Be more aggressive about clearing old requests from the internal queue
* Don't open network sockets when using -C
inet6 option was added. Comment out the option for now; if you want
IPv6, uncomment and turn off other conflicting options. Addresses
PR pkg/45358. While here, update to the latest version of the patch.
No PKGREVISION bump needed.
