changes:
-new cameras: Nikon S6000, Canon PowerShot A3000, PowerShot SX230HS,
Canon EOS 5D Mark III, Sony SLT A35, Nikon Coolpix AW100
-faster Canon EOS directory loading
-Canon EOS and Nikon support improvements
-bugfixes
-translation updates
tested with EOS40 (much faster than before indeed!)
alternative from mk/jpeg.buildlink3.mk
This allows selection of an alternative jpeg library (namely the x86 MMX,
SSE, SSE2 accelerated libjpeg-turbo) via JPEG_DEFAULT=libjpeg-turbo, and
follows the current standard model for alternatives (fam, motif, fuse etc).
The mechanical edits were applied via the following script:
#!/bin/sh
for d in */*; do
[ -d "$d" ] || continue
for i in "$d/"Makefile* "$d/"*.mk; do
case "$i" in *.orig|*"*"*) continue;; esac
out="$d/x"
sed -e 's;graphics/jpeg/buildlink3\.mk;mk/jpeg.buildlink3.mk;g' \
-e 's;BUILDLINK_PREFIX\.jpeg;JPEGBASE;g' \
< "$i" > "$out"
if cmp -s "$i" "$out"; then
rm -f "$out"
else
echo "Edited $i"
mv -f "$i" "$i.orig" && mv "$out" "$i"
fi
done
done
------------------------------------------------------------------------
libgphoto2 2.4.6
This is a 2.4 release branch update.
PTP2 driver:
* Fixed Nikon DSLR capture in LiveView mode (like gtkam uses).
* More Canon EOS stuff decoded, added experimental "capturetarget" support
for EOS.
* Canon EOS LiveView support (experimental, reported working for EOS 1000D).
* Added new USB ids:
- Kodak V803, M1063
- Canon PowerShot A650IS, SD990 (aka IXUS 980IS), SD880IS, A480
- Canon EOS 50D
- Fuji FinePix S1000fd
* Retrieve filedates again from PTP objects.
* speedup: Do not list files on / (there aren't any).
* Bugfixes.
Canon driver:
* Support Exposure Bias setting.
* More shutterspeeds.
libgphoto2:
* Fixed a problem during file retrieval which causes Canon Normal
--capture-image-and-download errors, handle CR2 and CRW mimetypes.
* Fixed ordering of filelists again that broke the digigr8 driver.
* Translation updates.
digigr8:
* Added a new version of the disney pix micro.
------------------------------------------------------------------------
libgphoto2 2.4.5
This is a 2.4 release branch update.
PTP2 driver:
* Increased timeout for Canon Viewfinder enable.
* Fixed intial Canon timeout (0.5 -> 1.5 seconds), was too small
for some Canons.
* Canon EOS capture mode and tethered mode bugfixes.
* Nikon DSLR LiveView support, with Autofocus and ManualFocus Drive possibili
ty.
* Nikon tethered capture fixes.
* New cameras listed:
Nikon CoolPix P50, S60
Canon Digital IXUS 85
Canon PowerShot A740, G10,
Canon EOS 5D Mark II
* Merged new IDs of Music Players from libmtp.
* Lots of bugfixes.
KODAK DC240:
* Made driver work again.
* Cleanups
libgphoto2:
* rewrote gphoto2-filesys.c to be dynamic and fix LRU problems.
(backport from TRUNK)
* Translation updates.
libgphoto2_port:
* added --enable/--disable configure options for: disk, serial, ptpip
* added --with/--without configure options for: bonjour, hal
* backported Gentoo "if just canon driver selected, auto-select ptp2 driver"
usability fix.
* Translation updates.
This changes the buildlink3.mk files to use an include guard for the
recursive include. The use of BUILDLINK_DEPTH, BUILDLINK_DEPENDS,
BUILDLINK_PACKAGES and BUILDLINK_ORDER is handled by a single new
variable BUILDLINK_TREE. Each buildlink3.mk file adds a pair of
enter/exit marker, which can be used to reconstruct the tree and
to determine first level includes. Avoiding := for large variables
(BUILDLINK_ORDER) speeds up parse time as += has linear complexity.
The include guard reduces system time by avoiding reading files over and
over again. For complex packages this reduces both %user and %sys time to
half of the former time.
changes:
-many improvements to PTP
-Experimental driver for jl2005c based cameras added
-Serial driver: do not lock device during probe to reduce startup time
-bugfixes
-translation updates
pkgsrc note: tested with EOS40D (capture das still not work)
libgphoto2 2.4.2
This is a 2.4 release branch update.
libgphoto2:
* Camera abilities list sorting now uses qsort(),
bringing startup speedups by seconds. (0.4 seconds on 2GHz machine).
* On large files, do not try to retrieve thumbnails.
* Updated lots of translations.
PTP2 driver:
* Full merge of TRUNK ptp2 camlib.
* Lots of new IDs added. Also changed MTP id handling to share devices
with current libmtp.
* Canon now can capture to both CF/SD Card and internal memory
with extract/retracting the lens. "capturetarget" config option
determines which ones used.
* EOS capture support made working with newer Canon EOS models,
now reported working for EOS 400D, 450D, 40D.
* Handle MTP -> Canon/Nikon vendor id transitions better.
* Download cancellation support.
* Handle canon cameras with shorter timeouts on startup (hopefully
does not break) to avoid very long second startup delays.
* Lots of bugfixes.
Canon driver:
* Configuration of Flash, Beep and Zoom added.
* Enable/disable remote mode only once per session (on demand)
* Fixed a CR2 thumbnail download problem.
* Fixed a THM download problem (for movies).
* Moved some more cameras over to PTP2 driver.
Topfield driver:
* New driver for Topfield PVR5000 device(s).
* Sony DSC F1 (old serial) driver:
* Merged from TRUNK, working now.
libgphoto2 2.4.1
This is a 2.4 release branch update.
Package / System integration:
* HAL FDI files now use "info.subsystem" instead of "info.bus", required
by hal after March 2008.
* Suppress another Olympus camera in FDI file that is better of done
using Mass Storage only.
libgphoto2_port:
* Suppress more known network filesystems in "disk" autodetection
* disabled usb_reset for Canon cameras in "usb", broke EOS cameras.
PTP2 driver:
* Merged all new Camera IDs from TRUNK.
* Configuration bugfix for multiple options with the same name.
* Capture bugfix for Nikon Coolpix
* Various small bugfixes.
Canon driver:
* Increased the event timeout, so operations work again.
* Fixed a bug in interval capture
* some additional configuration values for newer cameras
Mars driver:
* Synced with SVN TRUNK (1:1 copy).
* Better whitebalance postprocessing
* Camera ids added
* Decompression fixes
Digigr8 driver:
* Synced with SVN TRUNK (1:1 copy).
* bugfixes
Sonix driver:
* Synced with SVN TRUNK (1:1 copy).
* bugfixes
+ changes from 2.3.x
PTP:
* Fixed a memory leak in continuous Nikon / Canon capture mode.
Bindings:
* Moved all bindings into separate packages.
Package / System integration:
* Add README.packaging file.
* Removed obsolete print-usb-usermap. Use
"print-camera-list usb-usermap usbcam" instead.
* Fix libgphoto2 symbol list: Removed gpi_gphoto_port_type_map
* Add new permission setup script doing class based matching for
PTP class cameras not listed explicitly by USB IDs.
Changes 2.3.0:
PTP:
* Improved Nikon remote control
* Improved Canon file download
- faster directory retrieval (especially on cameras with lots of files)
- "new" images are marked (gphoto2 --new, digikam)
* MTP Playlist support (upload and download)
* MTP Metadata support (upload and download, Artist, Title, Playtime ... )
* Lots of other MTP related fixes.
* MTP autodetection on Microsoft OS Descriptor.
* New devices:
Canon PowerShot A540, A530, S3 IS, SD430, SD600, SD700, IXUS 800
and add a new helper target and script, "show-buildlink3", that outputs
a listing of the buildlink3.mk files included as well as the depth at
which they are included.
For example, "make show-buildlink3" in fonts/Xft2 displays:
zlib
fontconfig
iconv
zlib
freetype2
expat
freetype2
Xrender
renderproto
PKGLOCALEDIR and which install their locale files directly under
${PREFIX}/${PKGLOCALEDIR} and sort the PLIST file entries. From now
on, pkgsrc/mk/plist/plist-locale.awk will automatically handle
transforming the PLIST to refer to the correct locale directory.
RECOMMENDED is removed. It becomes ABI_DEPENDS.
BUILDLINK_RECOMMENDED.foo becomes BUILDLINK_ABI_DEPENDS.foo.
BUILDLINK_DEPENDS.foo becomes BUILDLINK_API_DEPENDS.foo.
BUILDLINK_DEPENDS does not change.
IGNORE_RECOMMENDED (which defaulted to "no") becomes USE_ABI_DEPENDS
which defaults to "yes".
Added to obsolete.mk checking for IGNORE_RECOMMENDED.
I did not manually go through and fix any aesthetic tab/spacing issues.
I have tested the above patch on DragonFly building and packaging
subversion and pkglint and their many dependencies.
I have also tested USE_ABI_DEPENDS=no on my NetBSD workstation (where I
have used IGNORE_RECOMMENDED for a long time). I have been an active user
of IGNORE_RECOMMENDED since it was available.
As suggested, I removed the documentation sentences suggesting bumping for
"security" issues.
As discussed on tech-pkg.
I will commit to revbump, pkglint, pkg_install, createbuildlink separately.
Note that if you use wip, it will fail! I will commit to pkgsrc-wip
later (within day).
developer is officially maintaining the package.
The rationale for changing this from "tech-pkg" to "pkgsrc-users" is
that it implies that any user can try to maintain the package (by
submitting patches to the mailing list). Since the folks most likely
to care about the package are the folks that want to use it or are
already using it, this would leverage the energy of users who aren't
developers.
