* Remove an useless patch
Changelog:
NSD 4.1.13
Sep 27, 2016
Features
multi-master-check: yes can be used to check all masters for the last version, using the higher version from the configured masters, from Manabu Sonoda.
Support RR type OPENPGPKEY from RFC 7929.
Can config key algorithms with the digest name, eg. 'sha256'.
configure --disable-radix-tree for about 15% lower memory usage.
for type SRV add A/AAAA to the additional section (if possible), just like we already do for type MX.
more extensible edns option handling.
Bugfixes
Fix compile warnings about unused result from write and strtol. and signcompare in minmax retrytime.
Fix#812: fix that make depend fails after distribution.
Fix#817: xfrd update failed loop.
Add robustness against unallocated data in nsec3 trees.
Fix README spelling error of BSD license (reported by Joerg Jung).
Fix multimaster for not tried full zone transfer for a expired zone.
Fix#827: fix compile with openssl 1.1.0 with api=1.1.0.
Changelog:
Fixed "Apply columns to..." did not honor special folders
Fixed Threading broken when editing message draft, due to loss of Message-ID
Fixed Mail saved as template copied In-Reply-To and References from original email.
Fixed Additional spaces were inserted when drafts were edited.
Fixed Recipient addresses were shown in red despite being inserted from the address book in some circumstances.
Fixed Display name was truncated if no separating space before email address.
* Change tarball to released one
Changelog:
Version 1.3.3 (2016-10-01):
- Support longer tweets in a few more places
- Properly escape ampersand characters in user mentions to fix
GtkLabel warnings about wrong escape characters in tooltips
- Fix tweet length calculations for whitespace-only tweets
- Check for duplicated entries in media arrays. This is apparently a
problem on Twitter's side but led to crashes in Corebird (see #627)
- Use the correct nsfw status of a tweet, i.e. the one that can
actually show images.
- Fix a crash when sending a tweet with multiple images attached
- Fix tweet length calculation of quote tweets. This previously led to
tweets getting rejected by the server even though Corebird claimed
they were fine. See #628
Version 1.3.2 (2016-09-25):
- Cope with the tweet length changes introduced by Twitter
- Fix a problem with malformed media URLs
CHangelog:
New
Asynchronous rendering of the Flash plugins is now enabled by default. This should improve performance and reduce crashes for sites that use the Flash plugin. (Bug 1307108)
Fixed
Change D3D9 default fallback preference to prevent graphical artifacts (Bug 1306465)
Network issue prevents some users from seeing the Firefox UI on startup (Bug 1305436)
Web compatibility issue with Array.prototype.values (Bug 1299593)
Various security fixes (CVE-2016-5287, CVE-2016-5288)
Web compatibility issue with file uploads (Bug 1306472)
Changed
Diagnostic information on timing for tab switching (Bug 1304113)
Fix a Canvas filters graphics issue affecting HTML5 apps (Bug 1304539)
Version 0.14.0
==============
*released on 26 October 2016*
- ``vdirsyncer sync`` now continues other uploads if one upload failed. The
exit code in such situations is still non-zero.
- Add ``partial_sync`` option to pair section. See :ref:`the config docs
<partial_sync_def>`.
- Vdirsyner will now warn if there's a string without quotes in your config.
Please file issues if you find documentation that uses unquoted strings.
- Fix an issue that would break khal's config setup wizard.
2.8.5
- Starting docs on sqliteq
- Use parentheses for compound select with MySQL.
- Remove "clean_prefetch_subquery" as I'm not sure why it exists in the
first place.
2.8.4
- New playhouse extension module for working with SQLite in
multi-threaded / concurrent environments. The new module is called
playhouse.sqliteq and it works by serializing queries using a dedicated
worker thread (or greenlet). The performance is quite good, hopefully
this proves useful to someone besides myself! You can learn more by
reading the sqliteq documentation.
- #1061 - @akrs patched a bug in TimestampField which affected the
accuracy of sub-second timestamps (for resolution > 1).
- #1071, small python 3 fix.
- #1072, allow DeferredRelation to be used multiple times if there are
multiple references to a given deferred model.
- #1073, fixed regression in the speedups module that caused SQL
functions to always coerce return values, regardless of the coerce
flag.
- #1083, another Python 3 issue - this time regarding the use of
exc.message.
Changelog:
The NSPR 4.13.1 release is now available. The hg tag is
NSPR_4_13_1_RTM. The source tar file can be downloaded from
https://ftp.mozilla.org/pub/mozilla.org/nspr/releases/v4.13.1/src/
NSPR 4.13.1 contains a single bug fix.
The previously released version 4.13 had changed pipes to be
nonblocking by default, and as a consequence, PollEvent was changed
to not block on clear.
The NSPR development team received reports that these changes
caused regressions in some applications that use NSPR, and it
has been decided to revert the changes made in NSPR 4.13.
NSPR 4.13.1 restores the traditional behavior of pipes and PollEvent.
=== Enhancements
Allocation::
- Change DiskThresholdDecider's behavior when factoring in leaving shards
Cluster::
- Add clusterUUID to RestMainAction output
=== Bug fixes
Core::
- Guard against negative result from FileStore.getUsableSpace when pick...
Highlighting::
- skip GeoPointMultiTermQuery when highlighting
- Fix highlighting of MultiTermQuery within a FunctionScoreQuery
Index APIs::
- Fix IndexNotFoundException in multi index search request.
Internal::
- Don't fail replica if FlushNotAllowedEngineException is thrown
Network::
- Don't send exception responses twice
Packaging::
- Fix Windows GC options
Query DSL::
- Fail parsing when match query contains an array of terms
REST::
- Correct the description for refresh
Reindex API::
- Make reindex tests a little less flaky
Scripting::
- Native scripts should be created once per index, not per segment.
Settings::
- Validate max thread/merge settings
BREAKING CHANGES:
- The default behavior of leave_on_terminate and skip_leave_on_interrupt are
now dependent on whether or not the agent is acting as a server or client.
- The allow_stale configuration for DNS queries to the Consul agent now
defaults to true, allowing for better utilization of available Consul
servers and higher throughput at the expense of weaker consistency.
- Output from HTTP checks is truncated to 4k when stored on the servers,
similar to script check output.
- Consul's Go API client will now send ACL tokens using HTTP headers instead
of query parameters, requiring Consul 0.6.0 or later.
- Removed support for protocol version 1, so Consul 0.7 is no longer
compatible with Consul versions prior to 0.3.
- The Raft peers information in consul info has changed format and includes
information about the suffrage of a server, which will be used in future
versions of Consul.
- New translate_wan_addrs behavior from [GH-2118] translates addresses in
HTTP responses and could break clients that are expecting local addresses.
- The behavior of the peers.json file is different in this version of
Consul. This file won't normally be present and is used only during outage
recovery.
- Consul's default Raft timing is now set to work more reliably on
lower-performance servers, which allows small clusters to use lower cost
compute at the expense of reduced performance for failed leader detection
and leader elections.
FEATURES:
- Transactional Key/Value API: A new /v1/txn API was added that allows for
atomic updates to and fetches from multiple entries in the key/value store
inside of an atomic transaction.
- Native ACL Replication: Added a built-in full replication capability for
ACLs.
- Server Connection Rebalancing: Consul agents will now periodically
reconnect to available Consul servers in order to redistribute their RPC
query load.
- Raft Updates and Consul Operator Interface: This version of Consul
upgrades to "stage one" of the v2 HashiCorp Raft library.
- Consul's default Raft timing is now set to work more reliably on
lower-performance servers, which allows small clusters to use lower cost
compute at the expense of reduced performance for failed leader detection
and leader elections.
- Servers will now abort bootstrapping if they detect an existing cluster
with configured Raft peers.
- Added new consul operator command, HTTP endpoint, and associated ACL to
allow Consul operators to view and update the Raft configuration.
- Serf Lifeguard Updates: Implemented a new set of feedback controls for the
gossip layer that help prevent degraded nodes that can't meet the soft
real-time requirements from erroneously causing serfHealth flapping in
other, healthy nodes
- Prepared Query Near Parameter: Prepared queries support baking in a new
Near sorting parameter.
- Automatic Service Deregistration: Added a new
deregister_critical_service_after timeout field for health checks which
will cause the service associated with that check to get deregistered if the
check is critical for longer than the timeout.
- WAN Address Translation Everywhere: Extended the translate_wan_addrs
config option to also translate node addresses in HTTP responses, making
it easy to use this feature from non-DNS clients.
- RPC Retries: Consul will now retry RPC calls that result in "no leader"
errors for up to 5 seconds.
- Circonus Telemetry Support: Added support for Circonus as a telemetry
destination.
IMPROVEMENTS:
- agent: Reap time for failed nodes is now configurable via new
reconnect_timeout and reconnect_timeout_wan config options (use with
caution).
- agent: Joins based on a DNS lookup will use TCP and attempt to join with
the full list of returned addresses.
- agent: Consul will now refuse to start with a helpful message if the same
UNIX socket is used for more than one listening endpoint.
- agent: Removed an obsolete warning message when Consul starts on Windows.
- agent: Defaults bind address to 127.0.0.1 when running in -dev mode.
- agent: Added version information to the log when Consul starts up.
- agent: Added timing metrics for HTTP requests in the form of
consul.http.<verb>.<path>.
- build: Updated all vendored dependencies.
- build: Consul releases are now built with Go 1.6.3.
- checks: Script checks now support an optional timeout parameter.
- checks: HTTP health checks limit saved output to 4K to avoid performance
issues.
- cli: Added a -stale mode for watchers to allow them to pull data from any
Consul server, not just the leader.
- dns: Consul agents can now limit the number of UDP answers returned via
the DNS interface.
- dns: Consul now compresses all DNS responses by default.
- dns: Added a new recursor_timeout configuration option to set the timeout
for Consul's internal DNS client that's used for recursing queries to
upstream DNS servers.
- dns: Added a new -dns-port command line option so this can be set without
a config file.
- ui: Added a new network tomography visualization to the UI.
BUG FIXES:
- agent: Fixed an issue where a health check's output never updates if the
check status doesn't change after the Consul agent starts.
- agent: External services can now be registered with ACL tokens.
- agent: Fixed an issue where large events affecting many nodes could cause
infinite intent rebroadcasts, leading to many log messages about intent
queue overflows.
- agent: Gossip encryption keys are now validated before being made
persistent in the keyring, avoiding delayed feedback at runtime.
- dns: Fixed an issue where DNS requests for SRV records could be
incorrectly trimmed, resulting in an ADDITIONAL section that was out of
sync with the ANSWER.
- dns: Fixed two issues where DNS requests for SRV records on a prepared
query that failed over would report the wrong domain and fail to translate
addresses.
- server: Fixed a deadlock related to sorting the list of available
datacenters by round trip time.
- server: Fixed an issue with the state store's immutable radix tree that
would prevent it from using cached modified objects during transactions,
leading to extra copies and increased memory / GC pressure.
- server: Upgraded Bolt DB to v1.2.1 to fix an issue on Windows where Consul
would sometimes fail to start due to open user-mapped sections.
DEPRECATIONS/CHANGES:
- Convergent Encryption v2: New keys in transit using convergent mode will
use a new nonce derivation mechanism rather than require the user to
supply a nonce. While not explicitly increasing security, it minimizes the
likelihood that a user will use the mode improperly and impact the security
of their keys. Keys in convergent mode that were created in v0.6.1 will
continue to work with the same mechanism (user-supplied nonce).
- etcd HA off by default: Following in the footsteps of dynamodb, the etcd
storage backend now requires that ha_enabled be explicitly specified in
the configuration file. The backend currently has known broken HA behavior,
so this flag discourages use by default without explicitly enabling it. If
you are using this functionality, when upgrading, you should set ha_enabled
to "true" before starting the new versions of Vault.
- Default/Max lease/token TTLs are now 32 days: In previous versions of
Vault the default was 30 days, but moving it to 32 days allows some
operations (e.g. reauthenticating, renewing, etc.) to be performed via a
monthly cron job.
- AppRole Secret ID endpoints changed: Secret ID and Secret ID accessors are
no longer part of request URLs. The GET and DELETE operations are now
moved to new endpoints (/lookup and /destroy) which consumes the input from
the body and not the URL.
- AppRole requires at least one constraint: previously it was sufficient to
turn off all AppRole authentication constraints (secret ID, CIDR block)
and use the role ID only. It is now required that at least one additional
constraint is enabled. Existing roles are unaffected, but any new roles or
updated roles will require this.
- Reading wrapped responses from cubbyhole/response is deprecated. The
sys/wrapping/unwrap endpoint should be used instead as it provides
additional security, auditing, and other benefits. The ability to read
directly will be removed in a future release.
- Request Forwarding is now on by default: in 0.6.1 this required toggling
on, but is now enabled by default. This can be disabled via the
"disable_clustering" parameter in Vault's config, or per-request with the
X-Vault-No-Request-Forwarding header.
- In prior versions a bug caused the bound_iam_role_arn value in the aws-ec2
authentication backend to actually use the instance profile ARN. This has
been corrected, but as a result there is a behavior change. To match using
the instance profile ARN, a new parameter bound_iam_instance_profile_arn has
been added. Existing roles will automatically transfer the value over to the
correct parameter, but the next time the role is updated, the new meanings
will take effect.
FEATURES:
- Secret ID CIDR Restrictions in AppRole: Secret IDs generated under an
approle can now specify a list of CIDR blocks from where the requests to
generate secret IDs should originate from. If an approle already has CIDR
restrictions specified, the CIDR restrictions on the secret ID should be a
subset of those specified on the role [GH-1910]
- Initial Root Token PGP Encryption: Similar to generate-root, the root
token created at initialization time can now be PGP encrypted [GH-1883]
- Support Chained Intermediate CAs in pki: The pki backend now allows, when
a CA cert is being supplied as a signed root or intermediate, a trust
chain of arbitrary length. The chain is returned as a parameter at
certificate issue/sign time and is retrievable independently as well.
[GH-1694]
- Response Wrapping Enhancements: There are new endpoints to look up
response wrapped token parameters; wrap arbitrary values; rotate wrapping
tokens; and unwrap with enhanced validation. In addition, list operations
can now be response-wrapped. [GH-1927]
- Transit features: The transit backend now supports generating random bytes
and SHA sums; HMACs; and signing and verification functionality using EC
keys (P-256 curve)
IMPROVEMENTS:
- api: Return error when an invalid (as opposed to incorrect) unseal key is
submitted, rather than ignoring it [GH-1782]
- api: Add method to call auth/token/create-orphan endpoint [GH-1834]
- api: Rekey operation now redirects from standbys to master [GH-1862]
- audit/file: Sending a SIGHUP to Vault now causes Vault to close and
re-open the log file, making it easier to rotate audit logs [GH-1953]
- auth/aws-ec2: EC2 instances can get authenticated by presenting the
identity document and its SHA256 RSA digest [GH-1961]
- auth/aws-ec2: IAM bound parameters on the aws-ec2 backend will perform a
prefix match instead of exact match [GH-1943]
- auth/aws-ec2: Added a new constraint bound_iam_instance_profile_arn to
refer to IAM instance profile ARN and fixed the earlier bound_iam_role_arn
to refer to IAM role ARN instead of the instance profile ARN [GH-1913]
- auth/aws-ec2: Backend generates the nonce by default and clients can
explicitly disable reauthentication by setting empty nonce [GH-1889]
- auth/token: Added warnings if tokens and accessors are used in URLs
[GH-1806]
- command/format: The format flag on select CLI commands takes yml as an
alias for yaml [GH-1899]
- core: Allow the size of the read cache to be set via the config file, and
change the default value to 1MB (from 32KB) [GH-1784]
- core: Allow single and two-character path parameters for most places
[GH-1811]
- core: Allow list operations to be response-wrapped [GH-1814]
- core: Provide better protection against timing attacks in Shamir code
[GH-1877]
- core: Unmounting/disabling backends no longer returns an error if the
mount didn't exist. This is line with elsewhere in Vault's API where
DELETE is an idempotent operation. [GH-1903]
- credential/approle: At least one constraint is required to be enabled
while creating and updating a role [GH-1882]
- secret/cassandra: Added consistency level for use with roles [GH-1931]
- secret/mysql: SQL for revoking user can be configured on the role
[GH-1914]
- secret/transit: Use HKDF (RFC 5869) as the key derivation function for new
keys [GH-1812]
- secret/transit: Empty plaintext values are now allowed [GH-1874]
BUG FIXES:
- audit: Fix panic being caused by some values logging as underlying Go
types instead of formatted strings [GH-1912]
- auth/approle: Fixed panic on deleting approle that doesn't exist [GH-1920]
- auth/approle: Not letting secret IDs and secret ID accessors to get logged
in plaintext in audit logs [GH-1947]
- auth/aws-ec2: Allow authentication if the underlying host is in a bad
state but the instance is running [GH-1884]
- auth/token: Fixed metadata getting missed out from token lookup response
by gracefully handling token entry upgrade [GH-1924]
- cli: Don't error on newline in token file [GH-1774]
- core: Pass back content-type header for forwarded requests [GH-1791]
- core: Fix panic if the same key was given twice to generate-root [GH-1827]
- core: Fix potential deadlock on unmount/remount [GH-1793]
- physical/file: Remove empty directories from the file storage backend
[GH-1821]
- physical/zookeeper: Remove empty directories from the zookeeper storage
backend and add a fix to the file storage backend's logic [GH-1964]
- secret/aws: Added update operation to aws/sts path to consider ttl
parameter [39b75c6]
- secret/aws: Mark STS secrets as non-renewable [GH-1804]
- secret/cassandra: Properly store session for re-use [GH-1802]
- secret/ssh: Fix panic when revoking SSH dynamic keys [GH-1781]
Changes in 2.4.0
- Added scripts for Korean (Choson'gul / Hangul), Burmese, Khmer,
Sinhalese, Thaana (Maldivan), Chinese (Zhuyin, Bopomofo), Tifinagh
(Berber), Tamil, Amharic, Telugu, Odia, Kannada, Gujarati.
- Renamed constants to more correct terms (Malay to Malayalam, Hindi to
Devanagari).
- Added getAlphabetsForTerritory(t), returning the most commonly used
alphabets for territory t.
- Improved some characters for Arabic and Devanagari.
- Fixed Bengali to also support Assamese.
- Improved readability of implementation.
- Added conditional define option for unittest: NO_POSIX_THREADS. Add
-DNO_POSIX_THREADS to your compiler command-line to not use
pthreads.h, for example, on MSVC platforms.
- Added conditional define option library: NO_FAST_ENCODE. Add
-DNO_FAST_ENCODE to your compiler command-line to not use the fast
encoding (default is to use fast encoding). Using fast encoding speeds
up de encoding by a factor of 2. For normal use, there is no reason not
to use fast encoding.
- Added parseMapcodeString to get individual mapcode elements, like the
territory code, the 'proper' mapcode (without the territory and
precision extension) and the precision extension parsed from a (user)
input string.
- Additional bug fixes.
This is a Python implementation of the WHATWG Encoding standard.
In order to be compatible with legacy web content when interpreting
something like Content-Type: text/html; charset=latin1, tools need
to use a particular set of aliases for encoding labels as well as
some overriding rules. For example, US-ASCII and iso-8859-1 on the
web are actually aliases for windows-1252, and an UTF-8 or UTF-16
BOM takes precedence over any other encoding declaration. The
Encoding standard defines all such details so that implementations
do not have to reverse-engineer each other.
This module has encoding labels and BOM detection, but the actual
implementation for encoders and decoders is Python's.
The Asterisk Development Team has announced the release of Asterisk 11.24.0.
The release of Asterisk 11.24.0 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!
The following are the issues resolved in this release:
Bugs fixed in this release:
-----------------------------------
* ASTERISK-26438 - [patch] chan_sip: auto_force_rport: No NAT = No
Symmetric Response. (Reported by Alexander Traud)
* ASTERISK-18232 - Broken REGISTER sent to IPv4 server when
bindaddr=[::] (Reported by Jacek)
* ASTERISK-26359 - [patch] cdr_mysql: fails to use UTC if so
instructed (Reported by Tzafrir Cohen)
* ASTERISK-19968 - TCP Session-Timers not dropping call (Reported
by Aaron Hamstra)
* ASTERISK-26360 - app_queue: "queue show" output gets "failed to
extend from 240 to 327" msgs. (Reported by Richard Mudgett)
* ASTERISK-26272 - chan_sip: File descriptors leak (UDP sockets)
(Reported by Etienne Lessard)
* ASTERISK-26288 - followme: fails to reset config items to
default values on reload (Reported by Tzafrir Cohen)
* ASTERISK-26282 - AEL: macro-call in Dial application, macro
"lacks 's' extension" (Reported by chris de rock)
* ASTERISK-26226 - pbx: Asterisk crash on AMI action
"ShowDialplan" when there's a circular dependency between
contexts (Reported by Etienne Lessard)
* ASTERISK-26299 - app_queue: Queue application sometimes stops
calling members with Local interface (Reported by Etienne
Lessard)
* ASTERISK-26306 - channel: Hang-up crashes, chan_pjsip not
cleaning up properly (Reported by Alexander Traud)
* ASTERISK-26203 - res_fax: Deadlock when using
FAXOPT(gateway)=yes with Local channels (Reported by Etienne
Lessard)
* ASTERISK-24822 - Deadlock: Fax Gateway framehook creates locking
inversion in T.38 query option with features bridging code
(Reported by David Brillert)
* ASTERISK-22732 - Deadlock potential in res_fax and CCSS with
local channels. (Reported by Richard Mudgett)
* ASTERISK-24841 - ConfBridge: Strange sampling rates chosen when
channels have multiple native formats (Reported by Matt Jordan)
* ASTERISK-24425 - [patch] jabber/xmpp to use TLS instead of
SSLv3, security fix POODLE (CVE-2014-3566) (Reported by
abelbeck)
* ASTERISK-25706 - pbx: Abort asterisk on features reload
(handle_hint_change) (Reported by Krzysztof Trempala)
* ASTERISK-26233 - pbx: Failure to remove inconsistent extension
names (Reported by Corey Farrell)
* ASTERISK-26267 - ast_register_atexit callbacks should be run on
failed startup. (Reported by Corey Farrell)
* ASTERISK-26265 - Errors ignored from some parts of system
initialization. (Reported by Corey Farrell)
* ASTERISK-25996 - Remove "live_dangerously" requirement on
DB(read) (Reported by Andrew Nagy)
* ASTERISK-26237 - Fax is detected on regular calls. (Reported by
Richard Mudgett)
* ASTERISK-23013 - [patch] Deadlock between 'sip show channels'
command and attended transfer handling (Reported by Ben
Smithurst)
* ASTERISK-26211 - Unit tests: AST_TEST_DEFINE should be used in
conditional code. (Reported by Corey Farrell)
* ASTERISK-26207 - [patch] sRTP: Count a roll-over of the sequence
number even on lost packets. (Reported by Alexander Traud)
* ASTERISK-26038 - 'make install' doesn't seem to install OS/X
init files (Reported by Tzafrir Cohen)
* ASTERISK-26133 - app_queue: Queue members receive multiple calls
(Reported by Richard Miller)
* ASTERISK-26196 - pbx: Time based includes can leak timezone
string (Reported by Corey Farrell)
* ASTERISK-25659 - res_rtp_asterisk: ECDH not negotiated causing
DTLS failure occurred on RTP instance (Reported by Edwin
Vandamme)
* ASTERISK-26046 - [patch] Avoid obsolete warnings on autoconf.
(Reported by Alexander Traud)
* ASTERISK-25289 - Build System does not respect CFLAGS and
CXXFLAGS when building menuselect (Reported by Jeffrey Walton)
* ASTERISK-26119 - [patch] fix: memory leaks, resource leaks, out
of bounds and bugs (Reported by Alexei Gradinari)
* ASTERISK-26179 - chan_sip: Second T.38 request fails (Reported
by Joshua Colp)
* ASTERISK-26157 - Build: Fix errors highlighted by GCC 6.x
(Reported by George Joseph)
Improvements made in this release:
-----------------------------------
* ASTERISK-26220 - Add support for noreturn function attributes.
(Reported by Corey Farrell)
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-11.24.0
Thank you for your continued support of Asterisk!
Upstream changes are bugfixes:
- Fix CMake configuration to allow build from released sources
package (#753)
- Fix memory leaks in single-sided buffers (#747), PlanarGraph and
tests
- Fix GeometryEditor to correctly update factory of empty geometries
(#749)
- Fix snapping of last segment of a closed linestring (#758)
- Fix memory exhaustion case in isvalid (#757)
- Fix Windows build with Visual Studio 2008 (#766)
- Fix incorrect return from prepared multipoint intersects (#764)
- Fix build against GCC 3.5.0+ (#784)
This is not a legal value for CCVER anymore. The legal values are
"gcc47" or "gcc50". However, "gcc47" should be avoid. For now everything
should build with the primary base compiler on DragonFly.
It's going on 10 years since gcc 3.4 and gcc 4.1 were part of DragonFly.
DF Release 4.4 is the earliest with any kind of support and the earliest
possible GCC version is 4.7 there.
Node.js is an evented I/O framework for the V8 JavaScript engine. It is
intended for writing scalable network programs such as web servers.
This package holds the 6.x LTS release.
This new major version of Node.js includes: V8 5.4 which brings along with
98% coverage of ES6 language features, improved reliability and performance,
and a new experimental URL parser based on the WHATWG URL standard.
As an odd numbered release, in accordance with our Long Term Support plan,
Node.js v7 will be supported only until about June, 2017, with Node.js v8
currently scheduled for release in April, 2017.
Notable changes
Buffer
- Passing invalid input to Buffer.byteLength will now throw an error #8946.
- Calling Buffer without new is now deprecated and will emit a process
warning #8169.
- Passing a negative number to allocUnsafe will now throw an error #7079.
Child Process
- The fork and execFile methods now have stronger argument validation #7399.
Cluster
- The worker.suicide method is deprecated and will emit a process warning
#3747.
Deps
- V8 has been updated to 5.4.500.36 #8317, #8852, #9253.
- NODE_MODULE_VERSION has been updated to 51 #8808.
File System
- A process warning is emitted if a callback is not passed to async file
system methods #7897.
Intl
- Intl.v8BreakIterator constructor has been deprecated and will emit a
process warning #8908.
Promises
- Unhandled Promise rejections have been deprecated and will emit a process
warning #8217.
Punycode
- The punycode module has been deprecated #7941.
URL
- An Experimental WHATWG URL Parser has been introduced #7448.
Local changes:
- add test target
- build and install optional modules (right now: oo, tree, binary,
readline, rlprompt, mk, tclprefix, sqlite3, zlib, win32)
- install shared library
- simplify usage of the GitHub framework
- use --docdir instead of the SUBST framework
Upstream changelog
==================
CHANGES SINCE VERSION 0.76
This release contains some bug fixes plus a number of additional features. A summary is below. See git for the full changelog.
Thanks to everyone who contributed to this release.
Bugs fixed in version 0.77
exec - better handline of pipeline abnormal termination
exec - fix append redirection on Windows
regsub - fix substitution with trailing backslash
expr - improved mathfunc handling and pow/**
chained tailcalls were not always being run
Features added in version 0.77
Add support for configure --docdir=...
Add support for jimsh --help
Add support for booleans in string is and expressions (true, false, on, off, yes, no)
aio - add sync, openssl bindings, posix locking
expr - add support for atan2, hypot and fmod
regexp, regsub:
Add support for \D, \W and \S
Add partial support for \A, \Z
Add support for all character classes: [[::blank:]], [[::xdigit::]], etc.
Update included sqlite3 to v3.14.1
Add $tcl_platform(engine)
Add basic (optional) zlib support
Add interp child interprester support
oo:
Add support for constructor, runs on new object creation
Add support for unknown method
Add Travis and AppVeyor continuous integration support
Use pkg-config in configure to find packages if possibe
Steve Bennett (steveb@workware.net.au)
-- http://jim.tcl.tk/fossil/doc/www/www/news/
Local changes:
- update MASTER_SITES to http://fossil-scm.org/xfer/uv/download/
Upstream changelog
==================
Changes for Version 1.36 (2016-10-24)
Add support for unversioned content, the fossil unversioned command and the /uv and /uvlist web pages.
The download page is moved into unversioned content so that the self-hosting Fossil websites no longer uses any external content.
Added the "Search" button to the graphical diff generated by the --tk option on the diff command.
Added the "--checkin VERSION" option to the diff command.
Various performance enhancements to the diff command.
Update internal Unicode character tables, used in regular expression handling, from version 8.0 to 9.0.
Update the built-in SQLite to version 3.15 (beta). Fossil now requires the SQLITE_DBCONFIG_MAINDBNAME interface of SQLite which is only available in SQLite version 3.15 and later and so Fossil will not work with earlier SQLite versions.
Fix multi-line timeline bug
Enhance the fossil purge command.
New command fossil shell.
SQL parameters whose names are all lower-case in Ticket Report SQL queries are filled in using HTTP query parameter values.
Added support for child projects that are able to pull from their parent but not push.
Added the -nocomplain option to the TH1 "query" command.
Added support for the chng=GLOBLIST query parameter on the /timeline webpage.
