- remove LIBXAW variable. It is handled by buildlink3.mk now
- simplify patches and Makefile in packages using libXaw
- in some cases force use of Xaw3d (won't build with Xaw)
- replace some directly included of x11/Xaw3d with mk/xaw.buildlink3.mk
In next part:
- replace more includes with mk/xaw.buildlink3.mk
libXext/buildlink3.mk, now that it is included there.
Leave the places where its API version is set or variables from it
are used directly (about 3 packages).
* libXp was used by Xaw8, but it had been obsolated, and in pkgsrc,
x11/libXaw/buildlink3.mk had been switched to pick up Xaw7 by default.
* With x11/xorg-cf-files, libXp was offered with XawClientLibs,
but updated to 1.0.4, it was removed.
* And pkgsrc had been switched to use always xorg-cf-files and imake from pkgsrc,
so all platforms should not require libXp from libXaw with Imake.
Bump PKGREVISION.
Shared directories can now be created independently by the pacakges
needing them and will be removed automatically by pkg_delete when empty.
Packages needing empty directories can use the @pkgdir command in PLIST.
Discussed and ok'd in thread starting at
http://mail-index.netbsd.org/tech-pkg/2009/06/30/msg003546.html
This changes the buildlink3.mk files to use an include guard for the
recursive include. The use of BUILDLINK_DEPTH, BUILDLINK_DEPENDS,
BUILDLINK_PACKAGES and BUILDLINK_ORDER is handled by a single new
variable BUILDLINK_TREE. Each buildlink3.mk file adds a pair of
enter/exit marker, which can be used to reconstruct the tree and
to determine first level includes. Avoiding := for large variables
(BUILDLINK_ORDER) speeds up parse time as += has linear complexity.
The include guard reduces system time by avoiding reading files over and
over again. For complex packages this reduces both %user and %sys time to
half of the former time.
libraries work properly with xaw.buildlink3.mk. That's better!
This was done so that X/Open Curses (pkgsrc-wip/pdcurses) could
have a chance of using these libraries. ;)
or USE_X11BASE set, but don't include mk/x11.buildlink3.mk directly or
via buildlink3.mks
- introduce BUILDLINK_PREFIX.libXpm as alias for BUILDLINK_PREFIX.xpm
in the !modular case
- fix some cases where the check for libX11 couldn't work at all by using
C++ for compilation without including the proper headers
Verified using a full X11_TYPE=xorg bulk build without additional
breakage. Discussed with salo@, wiz@ and send to packages@ for feedback.
packages with the modular Xorg equivalent. Those are falling back
to the old location by default, so this commmit doesn't change
dependencies.
graphics/xpm ==> x11/libXpm
fonts/Xft2 ==> x11/libXft
x11/Xfixes ==> x11/libXfixes
x11/xcursor ==> x11/libXcursor
x11/Xrender ==> x11/libXrender
x11/Xrandr ==> libXrandr
and add a new helper target and script, "show-buildlink3", that outputs
a listing of the buildlink3.mk files included as well as the depth at
which they are included.
For example, "make show-buildlink3" in fonts/Xft2 displays:
zlib
fontconfig
iconv
zlib
freetype2
expat
freetype2
Xrender
renderproto
RECOMMENDED is removed. It becomes ABI_DEPENDS.
BUILDLINK_RECOMMENDED.foo becomes BUILDLINK_ABI_DEPENDS.foo.
BUILDLINK_DEPENDS.foo becomes BUILDLINK_API_DEPENDS.foo.
BUILDLINK_DEPENDS does not change.
IGNORE_RECOMMENDED (which defaulted to "no") becomes USE_ABI_DEPENDS
which defaults to "yes".
Added to obsolete.mk checking for IGNORE_RECOMMENDED.
I did not manually go through and fix any aesthetic tab/spacing issues.
I have tested the above patch on DragonFly building and packaging
subversion and pkglint and their many dependencies.
I have also tested USE_ABI_DEPENDS=no on my NetBSD workstation (where I
have used IGNORE_RECOMMENDED for a long time). I have been an active user
of IGNORE_RECOMMENDED since it was available.
As suggested, I removed the documentation sentences suggesting bumping for
"security" issues.
As discussed on tech-pkg.
I will commit to revbump, pkglint, pkg_install, createbuildlink separately.
Note that if you use wip, it will fail! I will commit to pkgsrc-wip
later (within day).
Several changes are involved since they are all interrelated. These
changes affect about 1000 files.
The first major change is rewriting bsd.builtin.mk as well as all of
the builtin.mk files to follow the new example in bsd.builtin.mk.
The loop to include all of the builtin.mk files needed by the package
is moved from bsd.builtin.mk and into bsd.buildlink3.mk. bsd.builtin.mk
is now included by each of the individual builtin.mk files and provides
some common logic for all of the builtin.mk files. Currently, this
includes the computation for whether the native or pkgsrc version of
the package is preferred. This causes USE_BUILTIN.* to be correctly
set when one builtin.mk file includes another.
The second major change is teach the builtin.mk files to consider
files under ${LOCALBASE} to be from pkgsrc-controlled packages. Most
of the builtin.mk files test for the presence of built-in software by
checking for the existence of certain files, e.g. <pthread.h>, and we
now assume that if that file is under ${LOCALBASE}, then it must be
from pkgsrc. This modification is a nod toward LOCALBASE=/usr. The
exceptions to this new check are the X11 distribution packages, which
are handled specially as noted below.
The third major change is providing builtin.mk and version.mk files
for each of the X11 distribution packages in pkgsrc. The builtin.mk
file can detect whether the native X11 distribution is the same as
the one provided by pkgsrc, and the version.mk file computes the
version of the X11 distribution package, whether it's built-in or not.
The fourth major change is that the buildlink3.mk files for X11 packages
that install parts which are part of X11 distribution packages, e.g.
Xpm, Xcursor, etc., now use imake to query the X11 distribution for
whether the software is already provided by the X11 distribution.
This is more accurate than grepping for a symbol name in the imake
config files. Using imake required sprinkling various builtin-imake.mk
helper files into pkgsrc directories. These files are used as input
to imake since imake can't use stdin for that purpose.
The fifth major change is in how packages note that they use X11.
Instead of setting USE_X11, package Makefiles should now include
x11.buildlink3.mk instead. This causes the X11 package buildlink3
and builtin logic to be executed at the correct place for buildlink3.mk
and builtin.mk files that previously set USE_X11, and fixes packages
that relied on buildlink3.mk files to implicitly note that X11 is
needed. Package buildlink3.mk should also include x11.buildlink3.mk
when linking against the package libraries requires also linking
against the X11 libraries. Where it was obvious, redundant inclusions
of x11.buildlink3.mk have been removed.
foo-* to foo-[0-9]*. This is to cause the dependencies to match only the
packages whose base package name is "foo", and not those named "foo-bar".
A concrete example is p5-Net-* matching p5-Net-DNS as well as p5-Net. Also
change dependency examples in Packages.txt to reflect this.
USE_XAW, a package Makefile may just include mk/xaw.buildlink.mk, which
pulls in the correct buildlink.mk file depending on the value of XAW_TYPE.
A package Makefile may also rely on LIBXAW being set to the correct
libraries.
out of date - it was based on a.out OBJECT_FMT, and added entries in the
generated PLISTs to reflect the symlinks that ELF packages uses. It also
tried to be clever, and removed and recreated any symbolic links that were
created, which has resulted in some fun, especially with packages which
use dlopen(3) to load modules. Some recent changes to our ld.so to bring
it more into line with other Operating Systems also exposed some cracks.
+ Modify bsd.pkg.mk and its shared object handling, so that PLISTs now contain
the ELF symlinks.
+ Don't mess about with file system entries when handling shared objects in
bsd.pkg.mk, since it's likely that libtool and the BSD *.mk processing will
have got it right, and have a much better idea than we do.
+ Modify PLISTs to contain "ELF symlinks"
+ On a.out platforms, delete any "ELF symlinks" from the generated PLISTs
+ On ELF platforms, no extra processing needs to be done in bsd.pkg.mk
+ Modify print-PLIST target in bsd.pkg.mk to add dummy symlink entries on
a.out platforms
+ Update the documentation in Packages.txt
With many thanks to Thomas Klausner for keeping me honest with this.
