created, so put the new version of the distfile into a DIST_DUBDIR.
New distfile has been verified to contain the pkgsrc patch -- which actually
caused the change in the distfile.
What's new in Sudo 1.7.10p7?
* A time stamp file with the date set to the epoch by "sudo -k"
is now completely ignored regardless of what the local clock is
set to. Previously, if the local clock was set to a value between
the epoch and the time stamp timeout value, a time stamp reset
by "sudo -k" would be considered current.
What's new in Sudo 1.7.10p6?
* The tty-specific time stamp file now includes the session ID
of the sudo process that created it. If a process with the same
tty but a different session ID runs sudo, the user will now be
prompted for a password (assuming authentication is required for
the command).
What's new in Sudo 1.7.10p5?
* On systems where the controlling tty can be determined via /proc
or sysctl(), sudo will no longer fall back to using ttyname()
if the process has no controlling tty. This prevents sudo from
using a non-controlling tty for logging and time stamp purposes.
What's new in Sudo 1.7.10?
* If the user is a member of the "exempt" group in sudoers, they
will no longer be prompted for a password even if the -k flag
is specified with the command. This makes "sudo -k command"
consistent with the behavior one would get if the user ran "sudo
-k" immediately before running the command.
* The sudoers file may now be a symbolic link. Previously, sudo
would refuse to read sudoers unless it was a regular file.
* The user/group/mode checks on sudoers files have been relaxed.
As long as the file is owned by the sudoers uid, not world-writable
and not writable by a group other than the sudoers gid, the file
is considered OK. Note that visudo will still set the mode to
the value specified at configure time.
* /etc/environment is no longer read directly on Linux systems
when PAM is used. Sudo now merges the PAM environment into the
user's environment which is typically set by the pam_env module.
* The initial evironment created when env_reset is in effect now
includes the contents of /etc/environment on AIX systems and the
"setenv" and "path" entries from /etc/login.conf on BSD systems.
* On systems with an SVR4-style /proc file system, the /proc/pid/psinfo
file is now uses to determine the controlling terminal, if possible.
This allows tty-based tickets to work properly even when, e.g.
standard input, output and error are redirected to /dev/null.
* The sudoreplay command can now properly replay sessions where
no tty was present.
* Fixed a race condition that could cause sudo to receive SIGTTOU
(and stop) when resuming a shell that was run via sudo when I/O
logging (and use_pty) is not enabled.
in PR 47600.
NaCl (pronounced "salt") is a new easy-to-use high-speed
software library for network communication, encryption, decryption,
signatures, etc.
NaCl's goal is to provide all of the core operations needed to
build higher-level cryptographic tools.
libsodium is a library for network communication, encryption,
decryption, signatures, etc.
libsodium is a portable, cross-compilable, installable,
packageable, API-compatible version for NaCl.
One minor change was to take the "check" target out of the post-build
state and put it into the TEST_TARGET definition.
netpgpverify is a standalone program to verify a PGP signature
on a file or document. Both RSA and DSA signatures are supported,
as are binary and document signatures.
netpgpverify is compliant with RFC 4880.
netpgpverify is a small frontend for libnetpgpverify, to allow PGP digital
signatures to be verified from the command line.
signatures.
This library has no pre-requisites other than -lz and -lbz2.
This is libnetpgpverify, a standalone library to verify PGP
signatures.
It uses its own internal MPI/BIGNUM functions, which are a vastly
cut-down version of libtommath. For this reason, utilities and other
libraries can embed PGP signature verification, using a BSD-licensed
library.
Bugfixes:
* OPENDNSSEC-388: Signer Engine: Internal serial should take into account
the inbound serial.
* OPENDNSSEC-242: Signer Engine: Could get stuck on load signconf while
signconf was not changed.
* Signer Engine: Fixed locking and notification on the drudge work queue,
signals could be missed so that drudgers would stall when there was work to
be done.
Changes since previous version:
+ Minor documentation updates
+ gmake no longer needed to build
+ updated patch - still needed to quieten compiler for ctype warnings
(reported upstream)
OpenSSL version 1.0.1e released
===============================
OpenSSL - The Open Source toolkit for SSL/TLS
http://www.openssl.org/
The OpenSSL project team is pleased to announce the release of
version 1.0.1e of our open source toolkit for SSL/TLS. This new
OpenSSL version is a new feature release. For a complete
list of changes, please see
http://www.openssl.org/source/exp/CHANGES.
The most significant changes are:
o Corrected fix for CVE-2013-0169
troubleshooting package for ipv6, into the Packages Collection. This is version
1.3b.
The SI6 Networks' IPv6 toolkit is a set of IPv6
security/trouble-shooting tools, that can send arbitrary IPv6-based
packets.
flow6: A tool to perform a security asseessment of the IPv6 Flow Label.
frag6: A tool to perform IPv6 fragmentation-based attacks and to
perform a security assessment of a number of fragmentation-related
aspects.
icmp6: A tool to perform attacks based on ICMPv6 error messages.
jumbo6: A tool to assess potential flaws in the handling of IPv6 Jumbograms.
na6: A tool to send arbitrary Neighbor Advertisement messages.
ni6: A tool to send arbitrary ICMPv6 Node Information messages, and
assess possible flaws in the processing of such packets.
ns6: A tool to send arbitrary Neighbor Solicitation messages.
ra6: A tool to send arbitrary Router Advertisement messages.
rd6: A tool to send arbitrary ICMPv6 Redirect messages.
rs6: A tool to send arbitrary Router Solicitation messages.
scan6: An IPv6 address scanning tool.
tcp6: A tool to send arbitrary TCP segments and perform a variety of
TCP-based attacks.
=== 2.1.0 / 06 Feb 2013
* Added public cert. All gem releases are now signed. See INSTALL in readme.
* Remove self-require, it causes a warning in Ruby 1.9.2. [jbarnette]
* Allow for upload to use the filename of the local file by default [czarneckid]
* Properly handle receiving less data than requested. [thedarkone]
* Added option to create directory on directory upload [Pablo Merino]
* Remove a warnings in tests [kachick]
=== 2.6.5 / 06 Feb 2013
* Fixed path in gemspec [thanks priteau]
=== 2.6.4 / 06 Feb 2013
* Added license info to gemspec [jordimassaguerpla]
* Added public cert. All gem releases are now signed.
=== 2.6.3 / 10 Jan 2013
* Small doc fix and correct error class for PKey::EC key type [Andreas Wolff]
* Improve test dependencies [Kenichi Kamiya]
that we can now take advantage of AES-NI support in modern processors to significantly
increase performance.
Miscellaneous pkgsrc changes:
- Remove unnecessary warning message on Solaris.
- Fix RPATH for libgost.so.
- MD2 support is optional, enabled by default for compatability.
Changes between 0.9.8x and 0.9.8y [5 Feb 2013]
*) Make the decoding of SSLv3, TLS and DTLS CBC records constant time.
This addresses the flaw in CBC record processing discovered by
Nadhem Alfardan and Kenny Paterson. Details of this attack can be found
at: http://www.isg.rhul.ac.uk/tls/
Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
Security Group at Royal Holloway, University of London
(www.isg.rhul.ac.uk) for discovering this flaw and Adam Langley and
Emilia Käsper for the initial patch.
(CVE-2013-0169)
[Emilia Käsper, Adam Langley, Ben Laurie, Andy Polyakov, Steve Henson]
*) Return an error when checking OCSP signatures when key is NULL.
This fixes a DoS attack. (CVE-2013-0166)
[Steve Henson]
*) Call OCSP Stapling callback after ciphersuite has been chosen, so
the right response is stapled. Also change SSL_get_certificate()
so it returns the certificate actually sent.
See http://rt.openssl.org/Ticket/Display.html?id=2836.
(This is a backport)
[Rob Stradling <rob.stradling@comodo.com>]
*) Fix possible deadlock when decoding public keys.
[Steve Henson]
(We need to keep the old numbering syntax to make versions compare
correctly.)
There are only two consumers in pkgsrc; one of them (remmina and
remmina-plugins) actually needed library version 0.4 or later, and
didn't build the ssh/sftp/nx plugins without. Hydra is also supposed
to build with 0.4.x and later.)
Upstream changelogs:
0.5.4:
CVE-2013-0176 - NULL dereference leads to denial of service
Fixed several NULL pointer dereferences in SSHv1.
Fixed a free crash bug in options parsing.
and for completeness 0.5.3:
This is an important SECURITY and maintenance release in
order to address CVE-2012-4559, CVE-2012-4560, CVE-2012-4561
and CVE-2012-4562.
CVE-2012-4559 - Fix multiple double free() flaws
CVE-2012-4560 - Fix multiple buffer overflow flaws
CVE-2012-4561 - Fix multiple invalid free() flaws
CVE-2012-4562 - Fix multiple improper overflow checks
(...)
Suggested by Noud de Brouwer in wip/libssh and PR pkg/47518, but needed
some changes to PLIST as well as to make "pkg_admin audit" and updates
compare correctly.
(We need to keep the old numbering syntax to make versions compare
correctly.)
There are only two consumers in pkgsrc; one of them (remmina and
remmina-plugins) actually needed library version 0.4 or later, and
didn't build the ssh/sftp/nx plugins without. Hydra is also supposed
to build with 0.4.x and later.)
Upstream changelogs:
0.5.4:
CVE-2013-0176 - NULL dereference leads to denial of service
Fixed several NULL pointer dereferences in SSHv1.
Fixed a free crash bug in options parsing.
and for completeness 0.5.3:
This is an important SECURITY and maintenance release in
order to address CVE-2012-4559, CVE-2012-4560, CVE-2012-4561
and CVE-2012-4562.
CVE-2012-4559 - Fix multiple double free() flaws
CVE-2012-4560 - Fix multiple buffer overflow flaws
CVE-2012-4561 - Fix multiple invalid free() flaws
CVE-2012-4562 - Fix multiple improper overflow checks
(...)
(We need to keep the old numbering syntax to make versions compare
correctly.)
There are only two consumers in pkgsrc; one of them (remmina and
remmina-plugins) actually needed library version 0.4 or later, and
didn't build the ssh/sftp/nx plugins without. Hydra is also supposed
to build with 0.4.x and later.)
Upstream changelogs:
0.5.4:
CVE-2013-0176 - NULL dereference leads to denial of service
Fixed several NULL pointer dereferences in SSHv1.
Fixed a free crash bug in options parsing.
and for completeness 0.5.3:
This is an important SECURITY and maintenance release in
order to address CVE-2012-4559, CVE-2012-4560, CVE-2012-4561
and CVE-2012-4562.
CVE-2012-4559 - Fix multiple double free() flaws
CVE-2012-4560 - Fix multiple buffer overflow flaws
CVE-2012-4561 - Fix multiple invalid free() flaws
CVE-2012-4562 - Fix multiple improper overflow checks
(...)
Suggested by Noud de Brouwer in wip/libssh and PR pkg/47518, but needed
some changes to PLIST as well as to make "pkg_admin audit" and updates
compare correctly.
(We need to keep the old numbering syntax to make versions compare
correctly.)
There are only two consumers in pkgsrc; one of them (remmina and
remmina-plugins) actually needed library version 0.4 or later, and
didn't build the ssh/sftp/nx plugins without. Hydra is also supposed
to build with 0.4.x and later.)
Upstream changelogs:
0.5.4:
CVE-2013-0176 - NULL dereference leads to denial of service
Fixed several NULL pointer dereferences in SSHv1.
Fixed a free crash bug in options parsing.
and for completeness 0.5.3:
This is an important SECURITY and maintenance release in
order to address CVE-2012-4559, CVE-2012-4560, CVE-2012-4561
and CVE-2012-4562.
CVE-2012-4559 - Fix multiple double free() flaws
CVE-2012-4560 - Fix multiple buffer overflow flaws
CVE-2012-4561 - Fix multiple invalid free() flaws
CVE-2012-4562 - Fix multiple improper overflow checks
(...)
