a) refer 'perl' in their Makefile, or
b) have a directory name of p5-*, or
c) have any dependency on any p5-* package
Like last time, where this caused no complaints.
5.2.0nb4 to 6.0.1.
pkgsrc changes:
- Adjust license
- Adjust dependencies
- remove patch which correct bogus attributes (upstream fixed)
Upstream changes:
RELEASE 6.0.1 SEP-09-2010
- Removed all occurrences of the "locked" attribute that was
deprecated in Perl 5.12.0.
- Changed the test validating the presence of a monotonic time value
to check for invalid implementations.
- The SNMPv3 contextEngineID and contextName are now stored as part
of the request allowing for these values to be changed between
messages.
RELEASE 6.0.0 SEP-09-2009
- Substantial internal code cleanup was performed based upon the
Perl::Critic module and the "Perl Best Practices" book.
- Added support for the Module::Build system for building, testing,
and installing Perl modules.
- The translation logic for OCTET STRINGs now uses the definition of
a DisplayString in RFC 2579 to determine if the octets are to be
converted into a hexadecimal representation.
- The get_table() and get_entries() methods were refactored as part
of the code cleanup. The get_entries() method now handles "holes"
in tables better and indexes with a value of zero.
- The inheritance structure of the Transport Domain objects was
updated to reduce code duplication and increase maintainability.
- The resolution of IPv6 addresses was made more exhaustive.
- The handling of OBJECT IDENTIFIERs was made more efficient by
using [un]pack() with a BER compressed integer template.
- Additional validation of the values passed to most methods is now
performed and the error messages have been made more robust.
- The documented examples were updated based upon commonly asked
questions (specifically Example 3 and Example 4).
- A Response-PDU with an error-status set to "noError" no longer
generates an error when the error-index is non-zero, as decribed
in Section 4.2.4 of RFC 3416.
- The function oid_lex_cmp() was added to provide for the
lexicographical comparison of two OBJECT IDENTIFIERs.
- The error-status is no longer set for the exceptions noSuchObject,
noSuchInstance, and endOfMibView when translation is not enabled.
Removed all occurrences of the "locked" attribute that was
deprecated in Perl 5.12.0.
I didn't upgrade the package to 6.0.1 because it causes incompatibilities
with net/mrtg
PKGREVISON++
to trigger/signal a rebuild for the transition 5.10.1 -> 5.12.1.
The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=..."), minus the packages updated after
the perl package update.
sno@ was right after all, obache@ kindly asked and he@ led the
way. Thanks!
to trigger/signal a rebuild for the transition 5.8.8 -> 5.10.0.
The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=...").
developer is officially maintaining the package.
The rationale for changing this from "tech-pkg" to "pkgsrc-users" is
that it implies that any user can try to maintain the package (by
submitting patches to the mailing list). Since the folks most likely
to care about the package are the folks that want to use it or are
already using it, this would leverage the energy of users who aren't
developers.
- Removed the dependency on the IO::Socket::INET and IO::Socket::INET6
modules. The IO::Socket module is now used for all socket objects.
- The port information can now be included as part of the transport
address specified with the session() Transport Domain arguments.
- Added support for specifying the scope zone index for IPv6 addresses
as described in RFC 4007 - "IPv6 Scoped Address Architecture".
- The default value for the agent-addr in SNMPv1 Trap-PDUs is now the
IP address associated with the interface on which the trap will be
transmitted.
- Support of the AES privacy protocol was updated to be compliant with
RFC 3826 - "The Advanced Encryption Standard (AES) Cipher Algorithm
in the SNMP User-based Security Model".
- Corrected an issue where any non-blocking SNMPv3 message queued prior
to calling snmp_dispatcher() was sent with an empty contextEngineID.
- The first SNMPv3 discovery message is again being sent with a zero-
length msgUserName as suggested by RFC 3414.
- All sockets are now flagged as non-blocking to prevent a possible
deadlock due to an interaction between recv() and select().
- The sending of messages is now bounded by the receive processing rate
to avoid receive buffer overflows.
- The return value of select() is now checked for both "undef" and -1.
- The "usm.t" tests are now skipped if any of the non-core modules
required by the Net::SNMP::Security::USM module are not present.
I got few private comments that one should not use buildlink3.mk but the
standard DEPENDS statement because we do not link against libraries
in this case.
Changes since 4.1.2:
RELEASE 5.0.1 SEP-09-2004
- The module is now again functional with Perl 5.6.x. Compensations
were made for compatibility problems with the IO::Socket::INET and
Math::BigInt modules packaged with Perl 5.6.x.
- The UDP/IPv6 and TCP/IPv6 Transport Domains are now functional when
using version 2.0x of the IO::Socket::INET6 module.
RELEASE 5.0.0 JUL-20-2004
- Added support for the UDP/IPv6 Transport Domain listed in RFC 3419.
- Support for the TCP/IPv4 and TCP/IPv6 Transport Domains was added
as described in RFC 3430 - "SNMP over TCP Transport Mapping".
- Optimizations were made to ASN.1 processing and preparation methods.
- Corrected a possible memory exhaustion error with OCTET STRINGs that
contain "printf" format characters.
- The ASN.1 types associated with the ObjectSyntax values in the
VarBindList can now be retrieved using the var_bind_types() method.
- The function snmp_type_ntop() was added for displaying ASN.1 types.
- The Net::SNMP::Dispatcher module now checks for select() errors.
- Passing the "-maxrepetitions" argument with a value of 1 or less
to the get_table() or get_entries() methods instructs them to use
get-next-request messages instead of get-bulk-request messages.
- The maximum allowed value for the maxMsgSize was reduced to 65535.
- The Perl modules for the non-default Transport Domains and Security
Model are now loaded at runtime instead of compile time.
module directory has changed (eg. "darwin-2level" vs.
"darwin-thread-multi-2level").
binary packages of perl modules need to be distinguishable between
being built against threaded perl and unthreaded perl, so bump the
PKGREVISION of all perl module packages and introduce
BUILDLINK_RECOMMENDED for perl as perl>=5.8.5nb5 so the correct
dependencies are registered and the binary packages are distinct.
addresses PR pkg/28619 from H. Todd Fujinaka.
Changes:
RELEASE 4.1.2 SEP-11-2003
- Removed an unintended dependency on the Crypt::Rijndael that would cause
SNMPv3 support to be unavailable and the "usm.t" tests to fail due to
a "strict subs" error in Net::SNMP::Security::USM module.
RELEASE 4.1.1 SEP-09-2003
- Corrected a misinterpretation of the "The AES Cipher Algorithm in the
SNMP's User-based Security Model" draft specification that lead to
the incorrect encoding and decoding of the last block of the message.
- The syntax of the get_entries() method was changed to expect the column
values to entered as full OBJECT IDENTIFIERs allowing the traversal of
conceptual rows in different tables which are indexed identically.
- The processing of the serialization of an OBJECT IDENTIFIER was optimized.
- The oid_lex_sort() function was updated to order OBJECT IDENTIFIER strings
padded with spaces as lexicographically greater than unpadded strings.
- An empty contextEngineId in a response message is now accepted during
the SNMPv3 discovery process.
- Corrected an argument validation error with the get_bulk_request()
method.
RELEASE 4.1.0 MAY-06-2003
- Working in conjunction with the Extended Security Options Consortium
(http://www.snmp.com/eso), support for additional privacy protocols
has been added to the SNMPv3 User-based Security Model.
"Extension to the USM to Support Triple-DES EDE in 'Outside' CBC Mode"
Reeder and Gudmunsson; October 1999, expired April 2000
http://www.snmp.com/eso/draft-reeder-snmpv3-usm-3desede-00.txt
"The AES Cipher Algorithm in the SNMP's User-based Security Model"
Blumenthal, Maino, and McCloghrie; October 2002, expired April 2003
http://www.snmp.com/eso/draft-blumenthal-aes-usm-04.txt
- A new method called get_entries() was added to allow the retrieval
of columns of a table entry using get-next-requests or get-bulk-requests.
- The argument "-maxrepetitions" was added to the get_table() method.
- Responses to SNMPv3 messages with non-default contextEngineIDs or
contextNames are now properly processed.
- The method var_bind_names() was added to retrieve an array of the
ObjectNames in the VarBindList in the order in which they were
received in the GetResponse-PDU.
RELEASE 4.0.3 SEP-09-2002
- Net::SNMP objects are now destroyed as expected when they are no
longer referenced. An internal reference to the object allocated by
the Net::SNMP::Dispatcher module is now properly cleared.
- A socket with a file descriptor value of 0 is now accepted by the
Net::SNMP module as a valid and open filehandle.
- Removed an "optimization" which was intended to provide a smoother
initialization of the dispatcher but instead could lead to messages
incorrectly timing out.
RELEASE 4.0.2 MAY-06-2002
- The SNMPv3 request message sent for time synchronization is now sent
with the same securityLevel that is configured for the session.
- The "reserved" bits in the msgFlags field of an incoming SNMPv3
message are now ignored as suggested by RFC 2572.
- When encrypting a SNMPv3 message, the padding byte(s) are now set to
a value equal to the size of the padding. "The actual pad value is
irrelevant..." according RFC 2574 Section 8.1.1.2. However, there
are some agents that expect this byte pattern.
- Corrected a reference count mismatch which would leave a listening
socket open if no response is received from the remote agent.
- Corrected a "deep recursion" error that occurred when using the
get_table() method to retrieve large tables in blocking mode.
- Using the "-delay" argument with the get_table() method no longer
incorrectly delays between message exchanges when retrieving the table.
- Optimizations and improvements were made to the Net::SNMP::Dispatcher
event scheduling and handling procedures.
- The "translate unsigned" logic now correctly handles properly
formatted (but unexpected) negative Counter64, Counter, Gauge, and
TimeTick values.
- SNMPv3 objects using authentication now send a separate authenticated
request message for time synchronization while performing discovery.
- Non-blocking SNMPv1/2c messages with a "-delay" argument which are
queued before entering the event loop are no longer incorrectly
discarded.
- The Net::SNMP::Security::Community::security_model() method now
returns the correct value as reserved by RFC 2571.
- The first subidentifier in an OBJECT IDENTIFIER is now restricted to
ccitt(0), iso(1), or joint-iso-ccitt(2) as specified by ISO/IEC 8825.
Fixes PR/15220 by Shell Hung (I really should get a function key
with that text!)
- The module has been completely redesigned to add support for SNMPv3
and to follow the SNMP Management Framework defined by RFC 2571.
- Perl version 5.6.0 or greater is now required to use the module.
- Updated the method calls to expect the same argument syntax regardless
of whether they are invoked by "blocking" or "non-blocking" objects.
- The non-core modules Crypt::DES, Digest::MD5, Digest::SHA1, and
Digest::HMAC are now required to support SNMPv3.
- Added the ability to specify the local address and port number used by
each object.
- Corrected an error in the Net::SNMP::FSM module that would cause all
response messages to be dropped in "non-blocking" mode if there is
a recv() error.
- Updated the logic in the "blocking" response handling method such
the transmit buffer is properly updated if there is a decode
error while parsing the GetResponse-PDU.
- Counter, Guages, and TimeTick values that are incorrectly encoded as
negative signed integers are now converted to unsigned values. This
feature can be disabled by setting the "-unsigned" flag to false
using the translate() method.
- An empty community name is now allowed.
- Updated the "non-blocking" example script.
The automatic truncation in gensolpkg doesn't work for packages which
have the same package name for the first 5-6 chars.
e.g. amanda-server and amanda-client would be named amanda and amanda.
Now, we add a SVR4_PKGNAME and use amacl for amanda-client and amase for
amanda-server.
All svr4 packages also have a vendor tag, so we have to reserve some chars
for this tag, which is normaly 3 or 4 chars. Thats why we can only use 6
or 5 chars for SVR4_PKGNAME. I used 5 for all the packages, to give the
vendor tag enough room.
All p5-* packages and a few other packages have now a SVR4_PKGNAME.
