- can not replace a file by renaming another to its name under WIN32
fix in rateup #104
- Fix scaling when noo and noi options are used. fix for #95
- Stop staticly linking rateup. fix for #97
- Only set LD_RUN_PATH if it is actually necessary. patch from #98
- Net::SNMP only support aes128, des and 3des ... fix for cfgmaker from #99
- Understand desc and descr in ifdesc option of cfgmaker
- only set $args{'-maxrepetitions'} if $Net_SNMP_util::MaxRepetitions > 0
- do not load Net_SNMP_util unless snmpv3 is requested ... fix for #75
- be more agressive about updating the confcache. If a key is missing, go
looking for it again and complain. fix for #74
- only apply 32bit counter wrap compensation when the wrap is within 32bit
range. fix for #70
- implement pngdate as TimeStrPos[x]: RU instead of separately. for for #68
- add missing <p> tag arount 'last updated ... ' in html output. fix for #63
- remove rececondition when writing new trafic graph files by writing to a
temp file and moving it later. fix for #51
- make snmpopt_current available in cfgmaker templates. fix for #48
- explicitly import Socket6 routines in SNMP_Session. fix for #45
- default ThreshHyst to 0.1 only if ThreshDir is define. fix for #42
- point out when there is an unknown interface found. fix for #41.
- allow for $speed to return 0 and still use SNMPv2 ... some Cisco Gear
seems todo that. Fix for #33
- add dlink support for ifAlias OIDs to cfgmaker from #50
- add WWP (Ciena) support for ifAlias OIDs to cfgmaker from #66
- Updated squid docu #80
- Fix russian translation bug #92
- added rrdcached support
- new keyword: RRDCached: which overrides anything set in the RRDCACHED_ADDRESS
environment variable and sets MRTG to work in RRDCached mode. This verifies
that you're using a unix-domain socket and the socket is writeable.
- Check for environment variable RRDCACHED_ADDRESS and use this if no
explicit address was set in the cfg file, making the same config validity
checks.
- Make warning if using rrdcached to the effect that the thresholding
checks will no longer work.
- If in rrdcached-mode, and using RRDTool 1.4, then force use of update
rather than updatev (as rrdcached does not yet support updatev) and
consequently bypass the thresholding checks.
- Changes to validity check error messages to also report the file
containing the error (as well as the line).
- Added support for glob patterns in include
- Make daemon reload cfg automatically when it changes
- added support for Arista to cfgmaker
- fix cfgmaker to work in mixed v1/2/3 snmp environment
- do not strigify arguments to conversion function let eval take care of this
- untaint inlast and outlast to make perl taint mode happy
- teach cfgmaker about openbsd
pkgsrc changes:
- Avoid "Subroutine SNMP_Session::pack_sockaddr_in6 redefined" warnings
with the Perl 5.14.1. As the patch might break "mrtg" with older version
of Perl require at least version 5.14.1 of the "perl5" package.
* fix "P_DETACH" and Pod::Usage issues with perl 5.12
* relax cfgmaker option parsing when figuring whether to test for highspeed
counters or not.
* fix sorting of numbered interface names index maker
* belarusian translation for mrtg 2.16
Changes 2.16.3:
* three new config options to compliment the existing
RRDRowCount option to explicitly set the size of all RRAs
* allow to rename target in the clonedirectory option
* add import to the require File::Copy
* support multiple options in ifdesc and ifref setting for cfgmaker
* teach cfgmaker about nortel switches
* make sure rates over 4G work too
* allow group and user option to be set to roo
--------------------------
From: Steven Bakker steven.bakker ams-ix.net
* globally disable __DIE__ handler in eval using $^S check
* updated to SNMP_Session 1.12
From: Tobi
* make SNMP_Session.pm work on windows even when a __DIE__ handler ist
installed.
* Makesure mrtg repopulates its cache only once even in fork mode
* Added support for RRDtool based Holt-Winters aberrant behaviour detection.
Threshold based alerts have been enhanced to be able to fire based on the
FAILURES RRA. Note that Holt-Winters aberrant behaviour detection can only
be enabled on newly created RRAs.
* when thresholds were UNboraken, the threshprogok did not run necessarily
* MIB parser rewritten for better compatibility
* allow RouterUptime to contain an explicit OID for queriing the uptime.
* support for nortel passport 8600 in cfgmaker
* Added Documentation for GeTNEXT prefix
* Added New Prefix for Counterd SNMP Walk -> CnTWaLK (see docs)
* Upgrade to SNMP Session 1.10
* Updates for Net_SNMP_util.pm and SNMP_util.pm
* Fix if_is_ciscovlan condition in cfgmaker
* Updated port syntax in documentation (based on trac entry)
* make cfgmaker detect broken snmpv1 counters more reliably
* latest Net_SNMP_util.pm with many small fixes
* more cfgmaker smarts and documentation for snmpv3
* be happy even if no threshmail sending is configured
* add install target for traffic-summer
* fix mrtg-traffic-sum default catch expression to be in sync with docs
* Free positioning of a generated ifIndex in the OID string using
the magic IndexPOS keyword
* When doing threshold checking with rrdtool, there was a very expensive
'getting the data back with rrdinfo and rrdfetch' cycle after each
rrdupdate. with rrdtool 1.2 and the updatev function this is not
necessary anymore the new code speeds up mrtg cycle time by a factor of 3
to 10 depending on your platform.
* Threshold Un-Borken Messages will only be generated when the value is 10%
away from the threshold. Configurable via ThreshHyst
* New function thresholdmail lets you send an email when a threshold
is broken. This feature talks directly to the mailserver and does
not require any external programs.
* New template writers helper function in cfgmaker - oid_pick. It tests if a
device is willing to supply information regarding a particular oid. This
makes template writing much more plesant.
http://oss.oetiker.ch/mrtg-trac/browser/trunk/templates/cisco/host-cisco.tmpl
* added new tool mrtg-traffic-sum to build traffic stats based on the
content of your mrtg log (not rrd) files.
* mrtg running with rrdtool can now do sub-minute resolution if the interval
is specified like that: 0:30 ... note that you can not change the
resolution of an existing rrd file. So this will only have the desired
effect on new rrds. Also note that the graphing frontend may need changes
too to be able to deal with the new interval type. Internally interval is
now a float!
* new debug option 'prof' to see how long rrdtool spends on its writes ...
* fixed snmpv3 support in cfgmaker
INSTALLATION_DIRS, as well as all occurrences of ${PREFIX}/man with
${PREFIX}/${PKGMANDIR}.
Fixes PR 35265, although I did not use the patch provided therein.
* take over MAINTAINERship
* removed extra spaces from Makefile.in
* timestamps in log files to be YYYY-MM-DD HH:MM:SS
* fixed rateup to propely support kMG option
* fixed problem with conversioncode option throwing an exception.
* fixed config parsing problem for libadd lines terminated by a \
* added 'eval' debug target
* updated local $SIG{__DIE__} locations to work as intended
* fix ifspeed for foundry switches in cfgmaker
* Added expscale option (opposite of logscale) to emphasize the top end of
the scale; this improves display of line voltages that don't change a whole
lot
* added sample startup script for mrtg
Package changes include:
- pkglintification
- move to options.mk
- add in extra option for building with snmpv3 support (not tested)
- tidy up MESSAGE (no more html docs)
MRTG changes include:
* updated SNMP_util.pm and Net_SNMP_util.pm
* new: clonedirectory function
* Updated SNMP_Session to 1.08
* SNMP v3 support added Net::SNMP library required for this
For a full list see:
http://people.ee.ethz.ch/~oetiker/webtools/mrtg/pub/CHANGES
Addresses PR# 32811
ok'ed bouyer@
against "libttf" because the "net/mrtg/Makefile" enforced that. Only
depend on "freetype2" (indirectly via "gd") which is what "mrtg" really
uses these days. Bump package revision.
* fix warnings produced by pkglint
* fix portname math in indexmaker
* accept extreme networks switches for ifAlias in cfgmaker
* set unknown values to 0 for threshold checking if unknonwnaszero is set
* updated NetWare integration
