4.038 Fri Dec 17 17:47:47 PST 2010
Modify subs "new" and "new6" in Lite.pm to accomodate
Cisco mask syntax that uses space instead of "/" for a separator
This eliminates the need for "new_cis" and "newcis6" which are now
deprecated.
Modify LIte/t/v4-cnew.t and add Lite/t/v6-cnew.t to test the above
4.037 Fri Nov 19 10:48:01 PST 2010
add :upper and :lower to Lite.pm v1.23
add comments about rfc5952 requirement for lowercase ipV6 notation
in Lite.pm v1.23 and IP.pm
add test for :lower in Lite.pm v1.23
4.036 Tue Nov 16 16:28:37 PST 2010
In Util.pm v1.35, naip_gethostbyname modified to return undef
instead of 0 (zero) on failure
thanks to Terry Cassidy enaudishaylee@tc17.com for the bug report
In Util.pm v1.35, move sub's ipv6_n2d and ipv6_n2x to non-autosplit
portion of module to eliminate warnings during autosplit of "our"
variables
thanks to Nicholas Bamber <nicholas@periapt.co.uk>
Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=517361
In Lite.pm v1.22, update new6 to properly classify short ipv4 notation
i.e. 127/8 with test for ":" rather than match for \d.\d.\d.\d
thanks to Steve Huff (SHUFF) * shuff@cpan.org for
spotting that bug.
In Lite.pm v1.22, update t/v4-new.t for deprecated array syntax in
perl 5.13
was: qw(...stuff...)
is: (qw(...stuff...))
thanks to Todd Rinaldo <toddr@cpan.org> for reporting this
4.035 Thu Oct 28 14:26:19 PDT 2010
fix bug in Lite v1.21 where new6 improperly assigns the mask value
for and ipv4 address in 32 bit space instead of 128 bit space
Thanks to Mark Martinec and Steve Huff (SHUFF) * shuff@cpan.org
for spotting and replicating that bug
added new_cis and new_cis6 to Lite.pm v1.21 to accomodate
Cisco syntax that has IP and MASK seperated by a space.
Updated typo in documentation that left out example
print new6 stuff
4.034 Mon Oct 25 16:22:01 PDT 2010
Updated Lite::_xnew v1.20 to properly handle ipV6 notation of the form
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx, DDD
Thanks to Dusty Mabe <Dusty.Mabe@tekelec.com> for spotting this bug
4.033 Wed Sep 29 10:32:50 PDT 2010
Conditionalize import of AF_INET6 in Util.pm
NetAddr::IP::UtilPolluted
4.032 Wed Sep 22 13:39:08 PDT 2010
Added overload => 'ne' and '!=' to Lite.pm v1.18
4.031 Tue Sep 21 19:21:04 PDT 2010
Pull Socket6 stuff out of Lite 1.17 and put into
NetAddr::IP::Util.pm 1.33 in its own namespace
to trigger/signal a rebuild for the transition 5.10.1 -> 5.12.1.
The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=..."), minus the packages updated after
the perl package update.
sno@ was right after all, obache@ kindly asked and he@ led the
way. Thanks!
Upstream changes:
4.030 Tue Jul 20 15:32:23 PDT 2010
Resolve named hosts in Lite.pm using gethostbyname, followed by
gethostbyname6 to determine whether to set ipV6 flag
Thanks to Dusty Mabe <Dusty.Mabe@tekelec.com> for spotting this bug
4.029 Thu Jul 8 18:17:38 PDT 2010
In NetAddr::IP::Lite,
added support for the sub "new" to resolve host6 names
if the OPTIONAL perl Socket6 module is available
Thanks to "Mabe, Dusty" <Dusty.Mabe@tekelec.com> for spotting
this and suggesting a fix.
4.028 Wed May 12 14:18:20 PDT 2010
In /Lite/Util/Util.xs v1.32,
changed netswap() to postincrement
*a++ = to *a and added increment after save to mollify some
picky compilers that return possible undefined behavior.
changed type of _128x10 to 'void'
Thanks to David Bolt <dbolt@davjam.org> for the above two patches
Setting license to artistic according to module documentation
Upstream changes:
4.027 Tue Jun 9 10:31:11 PDT 2009
In NetAddr::IP::Util v1.31,
ferret out shell value for Makefile.PL when calling
./configure for systems where the 'x' bit gets lost
due to bug in Archive::Tar
- Updating package for p5 module NetAddr::IP to 4.026
- Set license to artistic-2.0
Upstream changes:
4.026 Sat Mar 7 16:35:33 PST 2009
make the compiler test check the environment for
CC before using Perl's default compiler
Upstream changes:
4.024 Mon Jan 26 00:27:32 PST 2009
documentation update
4.023 Fri Jan 16 14:30:40 PST 2009
added the capability to set the CASE of ipV6 text return
values to either upper or lower. Thanks to
Rob Riepel <riepel@networking.Stanford.EDU> for developing
this improvement and providing a comprehensive patch
pkgsrc changes:
- placate pkglint: fix SUBST_FILES.fixperl assignation and SUBST_SED.fixperl
style fix
Upstream changes:
4.022
In Util.xs 1.28
set uninitialized "carry" in XS bin2bcd to zero
This insidious bug only showed up on 64 bit hosts running perl 5.6.2
Thanks to Oliver Paukstadt <pstadt@sourcentral.org> for taking the
time to do the testing for me on his s390 system.
4.021 Wed Dec 10 11:09:36 PST 2008
Removed test code that produces a warning about all perl versions,
OOPS!! instead of just the buggy 5.8.0 - 5.8.5 versions.
Thanks to paul@city-fan.org for reporting this.
4.020 Tue Dec 9 16:25:46 PST 2008
cleaned up various typo's with good patch from
Rob Riepel <riepel@networking.Stanford.EDU>
thanks Rob.
revised UtilPP v1.7 to work around perl 5.8.4
failures with certain @_ operations of goto &sub...
see perl bug [ 23429]. Unfortunately, perl-5.8.4 is
the distribution of choice for many solaris boxes
Upstream changes:
4.018 Fri Nov 28 23:19:01 PST 2008
revised XS code to be full re-entrant, thread safe in Util.xs v1.26
removed all traces of mutex locks in Util.xs v1.26
removed function 'threads' here an in UtilPP v1.6
4.017 Sun Nov 23 19:32:59 PST 2008
Extended the capability of 'splitref' to allow splitting of
objects into multiple pieces with differing CIDR masks.
Returned object list can be split from bottom to top
or from top to bottom depending on which method is called
split, rsplit, splitref, rsplitref
Thanks to kashmish <kashmish@gmail.com> for the idea on
improving functionality of 'split'.
Thanks to Rob Riepel <riepel@networking.Stanford.EDU>
for a faster and more accurate _compV6 function.
in UtitPP v1.5
correct documentation error
add threads reporting (empty string)
in Util v1.25
add threads reporting that returns a comma separated
string of build headers.
added what is hopefully thread safe operation via
serializaton. Must be invoked by "--with-threads"
in Lite v1.12
corrected missing Zeros subroutine
Zeros and Zero both will work
in Lite v1.12
added minus (-) overloading to allow the subtraction
of two NetAddr::IP objects to get the difference between
the object->{addr}'s as a numeric value
Thanks to Rob Riepel <riepel@networking.Stanford.EDU>
for the initial code and inspiration for this enhancement
4.016 Wed Nov 5 18:13:20 PST 2008
in Util/ version 1.24
Clean up Makefile.PL to check actual required link
libraries against the perl build for consistency
Pkgsrc changes:
o Ensure to replace the interpreter with ${PERL5} in installed modules
Upstream changes:
4.015 Sun Nov 2 10:10:38 PST 2008
in Util v1.23 add missing headers in configure and localconf.h
for Solaris inet_xton
thanks to Karl Bunch <karl@digilink.net> for spotting the bug.
Pkgsrc changes:
remove (now) unneeded build dependency.
Upstream changes:
4.014 Sat Nov 1 15:13:48 PST 2008
in Lite.pm v1.11, add test for characters not allowed by
rfc952 before the call to gethostbyname in sub new() for those
people that insist on using deprecated functionality :aton
and OS's that fail to notice calls to gethostbyname with
binary arguments.
4.013 Wed Oct 22 15:04:49 PDT 2008
In Lite.pm v1.10, add new no octal method for
improperly formatted ipV4 addresses
In Util.pm v1.22, eliminated dependance on PL_sawampersand
thanks to Mark Martinec <Mark.Martinec@ijs.si>
for spotting this and submitting a patch.
In Util.pm v1.22, force -noxs mode for Win32
In Util.pm v1.22, use autoconf to configure 'C' build
4.012 Thu Oct 16 19:35:33 PDT 2008
clear build bug for Win32 in Util.pm v 1.21
4.011 released Oct 6 13:10
4.010 Sat Sep 27 17:00:28 PDT 2008
in NetAddr::IP::Util v0.19
updated test for ENDIANess in siteconf
add test in inet_aton to detect overange IP dot quad values
missed by some broken Socket implementations
i.e. 256.1.1.1 would fail to return undef
NOTE: Versions 4.008 and 4.009 had limited release to tester only
and were not uploaded to CPAN. All of the v4.008, 4.009
changes are incorporated in v4.010
4.009 Tue Sep 2 19:09:57 PDT 2008
In NetAddr::IP::Lite v1.07,
in the off chance that NetAddr::IP::Lite objects are created
and the caller later loads NetAddr::IP and expects to use
those objects, let the AUTOLOAD routine find and redirect
NetAddr::IP::Lite method and subroutine calles to NetAddr::IP.
updated Lite/t/v4-wnew.t so that non-existent
domains are "really" not there
4.008 Sat Jun 7 14:01:55 PDT 2008
inherit method "new_from_aton" from NetAddr::IP::Lite
add related documentation
Inherited methods from Lite.pm updated as follows:
comparisons of the form <, >, <=, >=
10.0.0.0/24 {operator} 10.0.0.0/16
return now return the comparision of the cidr value
when the address portion is equal.
NOTE: this comparison returns the comparison of the NUMERIC
value of the CIDR. This produces the counter intuitive result
that /24 > /16. There is logic to this, really! For proper
operation of commands like "Compact" and "Coalesce", lists of
netaddr objects must sort in ascending order. However, this
conflicts with the requirement for larger netblocks to sort
FIRST so as to include smaller ones. This logic extends to
any requirement for a sort of netaddr objects. It should be
further noted that the mixing of netaddr objects with varying
IP addresses and CIDR allocations can lead to unexpected
results since the comparisons done first on the IP portion
and then on the CIDR portion. The documentation has been
updated appropriately.
Thanks to Peter DeVries for spotting this discrepancy
to trigger/signal a rebuild for the transition 5.8.8 -> 5.10.0.
The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=...").
Pkgsrc changes:
- The supplied URL for HOMEPAGE did not work, changed it to search.cpan.org.
- A C compiler is necessary.
- The package supports installation to DESTDIR.
Changes since version 4.000 (changes since 3.33 not provided anymore):
======================================================================
4.007 Wed Jun 6 16:41:11 VET 2007
Update copyright dates
Wed Jun 6 21:50:20 VET 2007
Added patch from Daryl O'Shea to remove remaining $`. Thanks Daryl.
4.006 Wed Jun 6 15:58:04 VET 2007
A patch from Michael got rid of $& and $` as reported by Daryl
O'Shea and documented at
http://issues.apache.org/SpamAssassin/show_bug.cgi?id=5312
4.004 Wed Aug 16 16:01:54 PDT 2006
update to include/exclude files in corrupted distro
4.003 Sun Aug 6 10:48:25 PDT 2006
correct SYNOPSIS documentation
add :old_nth
update Lite.pm documentation
update Util.pm documentation
Imported into distribution CVS tree - Some revision number
mismatches are to be expected
Latin-1 is back
Fixed some angle brackets so that they show up in the docs
4.002 Fri Aug 4 14:14:16 PDT 2006
remove unused global variable $isV6
update Lite.pm to v1.02
$isV6 global converted to a lexical variable within sub "_xnew"
$Class global removed and replaced by calls to UNIVERSAL::isa
Thanks to julian@mehnle.net for spotting problems related to
using the Lite.pm with mod_perl
4.001 Thu Jul 6 14:09:01 PDT 2006
various bug fixes courtesy of Luis Munoz:
changes to Lite.pm v1.01, Util.pm v0.17 see Changes in those distros.
update t/v6-re.t, addconst called as a scalar, should be called to
return the address value ()[1]
4.000 Mon Jun 19 21:51:10 PDT 2006
initial release of version 4.000 which includes
full support of ipV6 addresses and drops the requirement
for Math::BigInt and will run on older versions of Perl
at least back to 5.005_03
developer is officially maintaining the package.
The rationale for changing this from "tech-pkg" to "pkgsrc-users" is
that it implies that any user can try to maintain the package (by
submitting patches to the mailing list). Since the folks most likely
to care about the package are the folks that want to use it or are
already using it, this would leverage the energy of users who aren't
developers.
Add HOMEPAGE.
Changes since last packaged version (3.21)
* 3.22
Fixed bug rt.cpan.org #7070 reported by Grover Browning (auto-inc/dec
on v6 fails). Thanks Grover. Ruben van Staveren pointed out a bug in
v6 canonicalization, as well as providing a patch that was
applied. Thanks Ruben.
* 3.23
Included support for Module::Signature. Added ->re() as
contributed by Laurent Facq (Thanks Laurent!). Added Coalesce() as
suggested by Perullo.
* 3.24
Version bump. Transfer of 3.23 to CPAN ended up in a truncated file
being uploaded.
module directory has changed (eg. "darwin-2level" vs.
"darwin-thread-multi-2level").
binary packages of perl modules need to be distinguishable between
being built against threaded perl and unthreaded perl, so bump the
PKGREVISION of all perl module packages and introduce
BUILDLINK_RECOMMENDED for perl as perl>=5.8.5nb5 so the correct
dependencies are registered and the binary packages are distinct.
addresses PR pkg/28619 from H. Todd Fujinaka.
Collection.
This Perl5 module is designed as a help for managing (ranges
of) IP addresses. It includes efficient implementations for most
common tasks done to subnets or ranges of IP addresses, namely
verifying if an address is within a subnet, comparing, looping,
splitting subnets into longer prefixes, compacting addresses to
the shortest prefixes, etc. Both IPv4 and IPv6 addresses are
supported.
