Upstream changes:
3.40 2019-10-23 Karl Williamson <khw@cpan.org>
- Fixed iusse #108, Roy Storey++
- Make case sensitivity determination overridable by user, Kenneth
Ölwing++
- Add expand_verbatim_tabs() method, which also can turn off
expansion, fixing #110
3.39 2019-06-30 Karl Williamson <khw@cpan.org>
- Fixed JustPod not opening file with :raw. Spotted by Dave Mitchell.
Fixed by James Keenan
- Fixed garbage line looking like pod. Spotted by Todd Rinaldo.
- Finished fixing Issue 95 by adding note that = in column 1 can be
misinterpreted as pod.
3.38 2019-05-30 Karl Williamson <khw@cpan.org>
- Removed some alien files that somehow got in the tar, including a copy
of Pod::Escapes. Spotted by Petr Pisar++
3.37 2019-05-30 Karl Williamson <khw@cpan.org>
- Suppressed some expected diagnostics under harness
- Pod::Simple now depends on the 'if' module
3.36 2019-05-15 Karl Williamson <khw@cpan.org>
- Added Pod::Simple::JustPod to extract the pod lines from a file
- Improved detection of input encoding CP1252 vs UTF-8
- Fixed github issue #79, =cut event out of order
- Fixed github issue #85, verbatim_indent doesn't work on HTML
- Fixed github issue #89, css files refer to themselves
- Fixed github issue #92, broken RTF with Unicode inputs
- Extended RTF to handle Unicode code points above 0xFFFF
- Nested L<> is now flagged as an error
- Turned off negative repeat count does nothing warnings
- Fixed/improved some docs about this distribution
Upstream changes:
* Release 3.35
2016-11-29 Karl Williamson <khw@cpan.org>
Needed to 'make manifest' before uploading to CPAN. No changes beyond
version bump
* Release 3.35
2016-11-29 Karl Williamson <khw@cpan.org>
Stabilize t/search50.t. Thanks to rurban for the patch!
Turn off utf8 warnings when trying to see if a file is UTF-8 or not.
* Release 3.33
No changes since 3.32.
--------------
2015-11-02 Marc Green <marcgreen@cpan.org>
* Release 3.32
Fixed failing tests on Windows. Thanks to A. Sinan Unur for the
patch!
Switched debugging output from STDOUT to STDERR. Should rarely be
used, but modules that do depend on debugging output might need to
change how they handle it. Patch from Karl Williamson (GitHub Pull
Request #76).
Added errata_seen() to make POD errors easily accessible. Thanks to
Sean Zellmer for the pull request!
Upstream changes:
2015-08-23 Marc Green <marcgreen@cpan.org>
* Release 3.31
No changes since 3.30_1.
2015-07-19 Marc Green <marcgreen@cpan.org>
* Release 3.30_1
Simplified the detection of case-insensitivity in Pod::Simple::Search.
Fixed "Use of uninitialized value $1 in lc" warning in
Pod::Simple::Search.
If @INC includes the current directory symbol, '.', the survey()
method of Pod::Simple::Search no longer excludes it from its list
of directories to search. Instead, The survey() and find() methods
now both exclude duplicate directories from @INC (RT #102344).
Moved source repository and updated links to new perl-pod GitHub
organization: https://github.com/perl-pod/pod-simple.
Improved repository links and added GitHub issue tracking link to
the distribution metadata.
Switched from File::Spec's catdir to catfile for path names, to
fix failures on VMS. Also now use Unix path semantics where
they're not required to be platform-specific. Thanks to Craig A.
Berry for the patch (RT #105511).
Improved the example use of the 'html_encode_chars()' method in
the Pod::Simple::XHTML documentation. Patch from Randy Stauner.
{perl>=5.16.6,p5-ExtUtils-ParseXS>=3.15}:../../devel/p5-ExtUtils-ParseXS
since pkgsrc enforces the newest perl version anyway, so they
should always pick perl, but sometimes (pkg_add) don't due to the
design of the {,} syntax.
No effective change for the above reason.
Ok joerg
( From the entry 2015-01-13 * Release 3.29)
NOTE: This will be the last release of Pod::Simple to support versions
of Perl earlier than 5.6.
-------------------
2015-02-23 David E. Wheeler <david@justatheory.org>
* Release 3.30
No changes since 3.29_6.
2015-02-19 David E. Wheeler <david@justatheory.org>
* Release 3.29_6
The survey() method in Pod::Simple::Search now ignores duplicat
files with varying lettercasing on case-insensitive file systems.
This allows
When pondering files in a given directory, the survey() method in
Pod::Simple::Search now prefers files with extensions in the
following order: no extension, .pod, .pm, .plx, .pl.
The find() method in Pod::Simple::Search now records the './pod'
subdirectory of each directory it considers in such a way as to
preserve its case on the file system.
The find() method in Pod::Simple::Search now tries harder to find
the proper file on case-insensitive file systems when searching
for modules starting with "Pod". For example, when searching for
'Pod::Perldoc' it now returns a file ending in 'Pod/Perldoc.pm'
instead of 'Pod/perldoc.pod', as the latter is actually the
documention for the 'perldoc' program.
2015-02-17 David E. Wheeler <david@justatheory.org>
* Release 3.29_5
No changes except that the release tarball should no longer be empty.
2015-02-16 David E. Wheeler <david@justatheory.org>
* Release 3.29_4
Removed "Caveats" from the docs. Pod::Simple has been out of beta
for years.
The survey() method in Pod::Simple::Search no longer assumes that
files ending in '.pod' are actually Pod. Like .pm and .pl files,
.pod files must contains at least one valid POD command, as
documented. This brings the behavior in line with find(), which
already required that .pod files contain Pod.
The survey() method in Pod::Simple::Search now prefers files
ending in .pod over those ending in .pm, and .pm over those ending
in .pl, when it finds duplicate pod files for a given name.
2015-02-11 David E. Wheeler <david@justatheory.org>
* Release 3.29_3
Tightened up the first pass at recognizing a Pod command so that
fewer invalid Pod lines will be recognized. Suggested by Randy
Stauner.
Fixed bug where Pod::Simple would attempt to call
utf8::unicode_to_native on Perl 5.6, where that function does not
exist.
Typos and minor wordsmithing changes in Pod::Simple::Subclassing,
thanks to Randy Stauner.
The Pod::Simple::Search survey() and find() methods now use the same
code for determining @INC directories to search. The only difference
is that find() also includes $Config::Config{'scriptdir'}.
2015-01-13 David E. Wheeler <david@justatheory.org>
* Release 3.29
NOTE: This will be the last release of Pod::Simple to support versions
of Perl earlier than 5.6.
Fixed test failure for unsupported encoding on Perl 5.6.
Removed unnecessary dependency on constant. Reported by Petr Pisar
(RT #85578).
Many documentation and comment typos fixed by David Steinbrunner.
Fixed issue when an encoding is declared via an '=encoding' directive
*after* Pod::Simple has already detected an encoding. Thanks to
Graham Knop for the patch and Patrice Dumas for the tests.
Added '>&STDERR' as an output to better emulate
Pod::Parser::parse_from_file(). Florent Angly.
Tidied the description of the different Pod::Simple interfaces,
with greater emphasis on the four different steps to subclassing.
Florent Angly.
Added the 'top_anchor' attribue to Pod::Simple::HTML, to allow
specification of a custom top anchor format. Gabor Szabo.
Fixed the text formatter to properly set the Text::Wrap overflow policy.
Thanks to Nigel Metheringham for the fix!
Fixed mis-matched quotation marks when adding JavaScript elements
to the XHTML output. Patch from jonathancast.
Fixed issues on EBCDIC. Patch from Karl Williamson (GitHub Pull
Request #58).
Fixed bug where the value passed to Pod::Simple::XHTML's
html_css() method would be output twice. Thanks to Andrew Johnson
for the report (RT #99303).
Documented the 'recurse' attribute of Pod::Simple::Search.
Thanks to Jim Keenan for the report (RT #91886).
An error is no longer thrown when '=encoding' directives are found
on subsequent lines. Instead, we now log a an error message,
"Cannot have multiple =encoding directives" (RT #91757).
The HTML and XHTML formatters now do a better job of preserving
lines in 'begin html' blocks. Fixes a bug that dates from 2002
(Perl RT#9385, CPAN RT #91851).
Do it for all packages that
* mention perl, or
* have a directory name starting with p5-*, or
* depend on a package starting with p5-
like last time, for 5.18, where this didn't lead to complaints.
Let me know if you have any this time.
a) refer 'perl' in their Makefile, or
b) have a directory name of p5-*, or
c) have any dependency on any p5-* package
Like last time, where this caused no complaints.
Upstream changes:
2013-05-04 David E. Wheeler <david@justatheory.org>
* Release 3.28
Removed use of 'done_testing' in t/white.t, which was added in
v3.27. Thanks to Paul Howarth for the catch.
Fixed inproperly calculated number of skipped tests in t/xhtml01.t
when HTML::Entities is not intalled.
2013-05-03 David E. Wheeler <david@justatheory.org>
* Release 3.27
Added new warnings as defined by Pod::Checker, thanks to RJBS:
+ "=over" without "=back"
+ "L<>" starts or ends with whitespace
+ raw "|" or "/" in "L<text|link>" text
Added ->keep_encoding_directive, which is false by default, to
prevent formatters from emitting a document's '=encoding'
directive in most cases. That they emitted the encoding was a bug
introduced in v3.26 (RT #84093). Now, only the DumpAsText and
DumpAsXML formats set it to true. Patch from Patrice Dumas.
2013-02-27 David E. Wheeler <david@justatheory.org>
* Release 3.26
Fixed another test script to skip all tests when Encode is not
installed.
Added 'encoding()' and 'detected_encoding()' to return the current
encoding and the encoding actually to decode the input file. The
value from "=encoding" is also now kept in the output tree. Patch
from Patrice Dumas (RT #74390).
Upstream changes:
2013-02-16 David E. Wheeler <david@justatheory.org>
* Release 3.25
Improved the warning when "=item" types mismatch within one
"=over"/"=back" block.
2013-02-14 David E. Wheeler <david@justatheory.org>
* Release 3.24
Fixed corner case bug for unlikely scenario in which non-UTF-8
text could be parsed as UTF-8. Grant McLean.
XHTML IDs can no longer end with punctuation. Thanks to Smylers
for the patch.
Fixed test failure on Perl 5.6.2.
Changed the default installation location from "perl" to "site" on
5.12 and higher, since as of that version of Perl, dual-life
modules no longer need to be installed in "perl" to replace
in-core versions. Patch from tzccinct.
Fixed hash order dependency test failures on Perl 5.17. Thanks to
Yves Orton for the patch.
Inlined the code that tries to guess a Pod file's encoding. This
reduces the time Pod::Simple takes to build the core Perl
documentation by 15-20%. Thanks to Dagfinn Ilmari Mannsåker for
the patch!
Added a warning when "=item" types mismatch within one
"=over"/"=back" block. Marc Green/Google Summer of Code, with
assist from RJBS.
Fixed regression introduced in 3.22 in which "C< >" tags were
incorrectly treated as verbatim text in table of contents items
emitted by Pod::Simple::XHTML. Thanks to Randy Stauner for the
report and to Thomas Sibley for the fix!
Loosened up the matching of "L< >" tags for man pages so that they
allow names with dots, underscores, and any other chararacters
other than "/", just so long as they end in '[(][-a-zA-Z0-9]+[)]'.
Thanks to Dave Rolsky and Kevin Ryde for the reports (RT #82975 &
RT #82972).
Fixed inverted mapping of "keyboard" to "kbd" in
Pod::Simple::HTML. Thanks to Robert Boisvert for the bug report
(RT #79201).
Added two new Tagmap entries to Pod::Simple::HTML: "preformat"
maps to "pre", and "teletype" maps to "tt". Suggested by Robert
Boisvert (RT #79201).
"X< >" tags are now ignored by the pull parser when it searches
for titles, as is any trailing whitespace. Thanks to Patrice Dumas
for the report (RT #74389).
Upstream changes:
2012-08-14 David E. Wheeler <david@justatheory.org>
* Release 3.23
Eliminated nested elements in table of contents (index) items
output of Pod::Simple::XHTML. This was especially problematic for
headers that included links, as the TOC then got nested anchor
elements, which simply would not work. Thanks to Ben Bullock for
the report and test case (RT #77686).
Fixed semantically invalid nested XHTML generated by
Pod::Simple::XHTML since v3.21. Gisle Aas.
Improved support for nested "C< >" tags in Pod::Simple::XHTML.
Gisle Aas.
No longer tries to decode a string with the "utf8" flag set, as
the double-decoding only triggered an error. Grant McLean.
Added documentation note that the API expects encoded text
(octets). Grant McLean.
Added "parse_characters()" option to specify that strings to are
already decoded from octets into characters. Grant McLean.
from 3.19 to 3.22.
Upstream changes:
2012-05-27 David E. Wheeler <david@justatheory.org>
* Release 3.22
Fix but where Pod::Simple would whine about non-ASCII bytes in
code or comments. Now only does so for Pod (in the absence of an
"=encoding" tag. Broken in 3.21. Grant McLean.
2012-05-23 David E. Wheeler <david@justatheory.org>
* Release 3.21
NOTE: COMPATABILITY CHANGE: The 'codes_in_verbatim' option in
Pod::Simple::XHTML is no longer enabled by default. This brings it
agreement with the other formatting classes, and eliminates
unexpected behavior in XHTML-formatted Pod. Users who depended on
this functionality can still get it by enabling
'codes_in_verbatim' in their code.
Fixed some typos in the documentation. Thanks to Jonathan Yu via
the Debian packagers via Florian Ragwitz (RT #75532).
Now emit a warning the first time a non-ASCII byte is encountered
when no "=encoding" has been seen. Grant McLean.
When a non-ASCII byte is encounted before an "=encoding" line has
been seen, a heuristic (as described in perlpodspec) is applied to
select UTF-8 encoding if the non-ASCII bytes form a valid UTF-8
byte sequence, or Latin-1 otherwise. Grant McLean.
Added 'handle_code' method to Pod::Simple::XHTML. This allows
subclasses to override the handling of verbatim blocks, and makes
for a more cohesive interface, to boot. Gisle Aas.
Subsequent text segments are now joined together and passed as a
single unit to text handling code. This makes it easier for custom
handlers to process complete blocks of text in a single call to
'handle_text', rather than in dribs and drabs. Gisle Aas.
Replaced naive text wrapping code in Pod::Simple::DumpAsXML with
Text::Wrap, which was already used for similar purposes elsewhere
in Pod::Simple. Gisle Aas.
2012-03-01 David E. Wheeler <david@justatheory.org>
* Release 3.20
Removed use of 'done_testing' in t/xhtml15.t, which was added in
v3.19. Thanks to Paul Howarth for the catch.
Fixed quoting of links in a regular expression Pod::Simple::Text.
Reported by Father Chrysostomos.
Fix test failure on case-insensitive, non-case-preserving file systems
(VMS I'm looking at *you*). Patch from Craig A. Berry.
Pod::Simple::HTML no longer emits "href='#___top'" if a TOC
(index) is not output. Patch from Rick Myers.
Fixed links in the TOC of XHTML output to use IDs derived from encoded
text, rather than raw Pod, so that it will link to the ID actually
generated for the section. Thanks to Randy Stauner for the report
(with test case!) (RT #72544).
PullParser now throws an exception on an attempt to set a source
more than once. Necessary because data from the previous source
will be cached, so the new source would be ignored anyway. Create a
new PullParser, instead. Thanks to Paul Boldra for the report (RT
#74265).
Changes from previous:
2011-08-23 David E. Wheeler <david@justatheory.org>
* Release 3.19
Fixed occasional test failure when tests are run in parallel
(HARNESS_OPTIONS=j6:c). Thanks to Alexei Znamensky for the report and
Marc Green for the fix.
Added "pod_handler" option. This is a callback that can be used to
inspect the content on a "=pod" line. Marc Green/Google Summer of
Code.
Added tests for proper line-ending parsing from the previous
release. The tests were in the repository, but didn't make it into
the MANIFEST or, therefore, the release. Reported by Marc Green.
Added the "parse_empty_lists" option. When enabled, Pod::Simple
will recognize empty lists (that is, a blocks with '=over' and
'=back' but nothing in between). Disabled by default. Marc
Green/Google Summer of Code.
Added the "whiteline_handler" attribute. It's much like
"code_handler", "cut_handler", and "pod_handler", except it's
triggered on lines that contain only whitespace characters. Marc
Green/Google Summer of Code.
Added "raw" attribute to L<> treelet that contains the L<>'s raw
contents. Marc Green/Google Summer of Code.
Pod directives autoclosed by Pod::Simple are now denoted as such
by the new "fake_closer" attribue. Marc Green/Google Summer of
Code.
Fixed incompatibility with Pod::Simple::HTMLBatch in
Pod::Simple::XHTML. Patch by Eric Johnson.
2011-07-16 David E. Wheeler <david@justatheory.org>
* Release 3.18
Pod::Simple now properly parses Pod files using Mac OS Classic line-
endings (\r). Marc Green/Google Summer of Code.
Fixed test failure in 't/search50.t when the test finds a .pod but
the module is in a .pm. Thanks to the cpan-testers who reported
this when the test searched for Capture::Tiny.
2011-07-09 David E. Wheeler <david@justatheory.org>
* Release 3.17
Documented tertiary methods. Patch from Shawn H Corey.
Added "backlink" option to Pod::Simple::XHTML. Thanks to Marc
Green/Google Summer of Code for the pull request.
Typos fixed in Pod::Simple::HTMLBatch. Reported by Shawn H Corey.
Fixed quoting of value returned by a "strip_verbatim_indent()"
code reference so that regex meta characters are properly escaped.
Added "anchor_items" option to Pod::Simple::XHMTL. This allows
text items (which are output as <dt> elements) to have IDs that
can be referenced in the "#" part of a URL. Marc Green/Google
Summer of Code.
Added "recurse" option to Pod::Simple::Search. It's enabled by
default; disable it to turn off recursion into subdirectories.
Marc Green/Google Summer of Code.
Added documentation to clarify the behavior of the "content_seen"
method. Thanks to Olaf Alders for the pull request.
2011-03-14 David E. Wheeler <david@justatheory.org>
* Release 3.16
Fixed invalid HTML generated for nested lists by Pod::Simple::XHTML
(Fitz Elliott).
Replaced the invalid "<nobr>" tag -- created for "S<>" -- with
'<span style="white-space: nowrap;">' (Fitz Elliott).
Fixed some nerbles in our own Pod (Michael Stevens)
Improved the "Minimal code" example in Pod::Simple::HTML. The key
is to use pase_file(), not parse_from_file() (which should
otherwise be undocumented, and is just there for Pod::Parser
compatibility.
Added the html_charset() and html_encode_chars() attributes to
Pod::Simple::XHTML. Inspired by a bug report from Agent Zhang
(RT #29587).
Added "Minimal code" example to the Pod::Simple::XHTML documentation.
Fixed mispelling of the "=encoding" markup in the parser (it was
spelled "=encode"). Thanks to "TTY" for the patch. (RT #24820).
2010-11-11 David E. Wheeler <david@justatheory.org>
* Release 3.15
Removed "perlpod.pod" and "perlpodspec.pod". These now just live
in the Perl core.
Fixed stylesheet names output by HTMLBatch to match the names of
the actual stylesheet files (broken in 3.09). Thanks to Kevin Ryde
for the report (RT #56725).
Added missing closing slash to the CSS links in the XHTML output.
Thanks to HarleyPig for the patch!
Added parens around bar "qw(...)" in t/xhtml05.t. Thanks to Jerry
D. Hedden for the patch.
Improved the Pod::Simple::HTML docs. Thanks to Gabor Szabo for the
patch.
Pod::Simple::XHTML now properly encodes entities in URLs in the
anchor tag. Thanks to John McNamara for the report (RT-60249).
Pod::Simple::HTML and XHTML now strip whitespace from the end of
section names that appear as anchor names for headers (in HTML)
and IDs (in XHTML). Such whitespace appeared when "X<>" entities
were stripped out but not the space between them (RT-56572).
Make test "t/search50.t" always pass on case-insensitive file
systems rather than just skip VMS.
to trigger/signal a rebuild for the transition 5.10.1 -> 5.12.1.
The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=..."), minus the packages updated after
the perl package update.
sno@ was right after all, obache@ kindly asked and he@ led the
way. Thanks!
Upstream changes:
2009-04-27
* Release 3.14
Removed explicit loading of UNIVERSAL. RJBS.
Reversed the change applied in release 3.09 to fix RT #12239. POD
tag found inside a complex POD tag (e.g., "C<<< I<foo> >>>") is
again parsed as a tag embedded in a tag instead of text and
entities. The previous interpretation of `perldoc perlpod` was
mistaken. (RT #55602 from Christopher J. Madsen).
Upstream changes:
2009-12-17 Release 3.13 - David E. Wheeler <david@justatheory.org>
Removed deleted test file from MANIFEST.
2009-12-17 Release 3.12 - David E. Wheeler <david@justatheory.org>
Removed "All rights reserved" from all files.
Added acknowledgements to man.he.net and search.cpan.org for
permission to link man pages and Perl module links to their sites
in the output of Pod::Simple::HTML and Pod::Simple::XHTML.
Add "html_h_level" option to Pod::Simple::XHTML and ::HTML to allow
a =head1 to become an <h2> and so on. RJBS.
Add batch_mode_page_object_init() method to Pod::Simple::XHTML.
This allows it to be used by Pod::Simple::HTMLBatch.
Fixed a regression in Pod::Simple::XHTML where '=begin html' blocks
were incorrectly escaped rather than simply passed through unmolested.
RJBS.
Removed the undocumented "fullstop_space_harden" attribute, which
apparently was only used by Pod::Text a very long time ago.
2009-12-09 David E. Wheeler <david@justatheory.org>
* Release 3.11
Restored code to HTMLBatch that allows the TOC (index) to be created
in batch jobs (RT #52324 from Martin J. Evans).
Added resources to META.yml, including bug tracker, license, and
repository.
Turned man page links into links to man.he.net in Pod::Simple::HTML
and Pod::Simple::XHTML output. Subclass and override
resolve_man_page_link() to use a different URL.
Added the resolve_pod_page_link() and resolve_man_page_link() methods
to Pod::Simple::XHTML to make it easier for subclasses to change the
URLs created for POD and man page links.
Fixed the output of entities in L<> tags by Pod::Simple::XHTML.
Fixed the output of POD links from Pod::Simple::XHTML so that the
section part (/foo) is turned into a proper fragment identfier (#foo)
in the resulting search.cpan.org link.
Pod::Simple::Text now outputs URLs for links created in the
L<text|URL> format. For example, L<Perl|http://perl.org> is now
output as "Perl <http://perl.org>" rather than just as "Perl".
Updated perlpod.pod and perlpodspec.pod to sync up with Perl core
(and to be released in Perl 5.12). Changes include:
* Removing the prohibition against L<text|href>
* Deprecation of L<section> and L<"section">
* Legalization of "=begin formatname parameter"
A couple of bug fixes in Pod::Simple::HTML from Graham Barr.
Added the do_section() method to Pod::Simple::HTML. Graham Barr.
Word-smithed the "DESCRIPTION" a bit and wrote the README.
Synced up all module version numbers to 3.11 except for
Pod::Simple::HTMLLegacy, which is at 5.01 and should not have its
version number lowered.
2009-11-12 David E. Wheeler <david@justatheory.org>
* Release 3.11
Converted test files that had DOS endings to have Unix endings
(RT #50922 from Steve Hay).
Skip tests on VMS where the lack of filename case preservation can
wreak havoc (RT #51184 from Craig A. Berry).
Fix nested definition list format in the XHTML output
(RT #51187 from Lars Dɪᴇᴄᴋᴏᴡ).
Added some files missing from the MANIFEST (and therefore the
distribution) in the last two releases.
Pkgsrc changes:
- none
Changes since version 3.08:
===========================
Add support for an index (TOC) in the XHTML output from David E.
Wheeler.
Add strip_verbatim_indent() from David E. Wheeler.
Added the "nocase" option to PullParser's get_title(),
get_version(), get_description(), and get_author() methods. This
allows one to fetch the contents of those sections regardless of
the case of the labels (e.g., "NAME" and "Name" and "name" are all
valid). Graham Barr.
Added the search_class() accessor to Pod::Simple::HTMLBatch.
David E. Wheeler.
XHTML output now properly encodes entities in all places, not just
in verbatim blocks and code spans. David E. Wheeler.
Fixed XHTML to output definition lists when it should, rather than
(broken) unordered lists. David E. Wheeler.
Fixed XHTML so that multiparagraph list items work correctly.
David E. Wheeler.
Fixed XHTML ordered list output so that it does not include the
number specified in the POD in the output. This is on a par with
out the HTML output works. David E. Wheeler.
Applied URL patch from Leon Brocard for The Perl Journal archives.
Fixed test failures with older versions of HTML::Entities (RT #43903
from Salvador Tercia).
Changed CSS files generated by HTMLBatch to be no more than 8.3
characters long. (RT #40450 from Renee Baecker)
Added entity handling for E<sol> and E<verbar> to Pod::Simple::XHTML.
(RT #49615 from Chas Owens.)
Fixed a bug in Pod::Simple::HTML where a definition term item with
no corresponding definition item would be output with no closing
</a></dt>. (RT # 37107 from Kevin Ryde).
Added entity handling for numeric entities to Pod::Simple::XHTML,
following perlpod specification.
A POD tag found inside a complex POD tag (e.g., "C<<< C<foo> >>>")
is now properly parsed as text and entities instead of a tag
embedded in a tag. This is in compliance with `perldoc perlpod`
(RT #12239 from Michael Schwern).
Thanks to David E. Wheeler for applying patches, resolving bugs,
and generally getting ready for the release.
pkgsrc changes:
- Adding license (perl5 license)
Upstream changes:
2009-07-16 Allison Randal <allison@perl.org>
* Release 3.08
Fix installdirs for Perl versions where Pod::Simple was core;
RT#36446 & RT#39709, thanks to Jerry Hedden.
Fix encoding handling for code in paragraphs; RT#45829, thanks
to David Wheeler.
to trigger/signal a rebuild for the transition 5.8.8 -> 5.10.0.
The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=...").
2008-06-04 Allison Randal <allison@perl.org>
* Release 3.07
Fix module dependencies, make HTML::Entities optional and require
Test::More.
2008-06-03 Allison Randal <allison@perl.org>
* Release 3.06
Fix bugs related to passing $1 to File::Spec, reported by
Andrew Hamlin and John McNamara.
Applied a suggested fix from Kevin Ryde to return a successful exit
code when Pod::Simple::HTML is run from the command line.
Fix handling of complex L<URL> entries, thanks to tests
supplied in RT#4896.
Fix incorrect handling of S<> entries made up of entirely
whitespace, thanks to test case from Andreas Koenig.
Launch Pod::Simple::XHTML, an XHTML compliant, more easily extensible
HTML formatter.
Add feature to parse additional text after =begin target as a block
title, requested by Adam Kennedy.
Thanks to Hans Dieter Pearcey for applying patches, resolving bugs,
and generally getting ready for the release.
Patch provided by Mark E. Perkins in PR 36465.
2007-03-03 Allison Randal <allison@perl.org>
* Release 3.05
Standardized all test files on 8.3 naming scheme for Perl core.
Applied test patches from Jerry Hedden for Perl core when
Encode not installed.
Applied test patch from Ken Williams for 5.005_04 compatibility.
Applied a patch from Christopher Madsen to fix architecture
directory searches on Gentoo.
Fixed a failing search test on Debian-based distributions caused
by Debian stripping Pod documentation out of core modules.
(Three cheers to the CPAN testers and James Ponza for sending
enough reports that I could work out the pattern.)
Based on patch provided by Martin Wilke via PR 34418.
And this version depend on p5-Pod-Escapes>=1.04.
2006-01-18 Allison Randal <allison@perl.org>
* Release 3.04
Applied test patches for Perl core integration from Steve Peters.
Added a 'reinit' method to Pod::Simple::BlackBox for Russ Allbery
so Pod::Man can provide backward compatibility to existing users
(such as Module::Build and ExtUtils::MakeMaker).
Applied patch for extracting case-preserved package names on VMS
from Craig Berry.
developer is officially maintaining the package.
The rationale for changing this from "tech-pkg" to "pkgsrc-users" is
that it implies that any user can try to maintain the package (by
submitting patches to the mailing list). Since the folks most likely
to care about the package are the folks that want to use it or are
already using it, this would leverage the energy of users who aren't
developers.
2005-11-21 Allison Randal
* Release 3.03
Applied whitespace patches for Pod::Man and Pod::Text from
Russ Allbery.
Applied validation patches to Pod::Simple::HTML from Graham Barr.
distfile. I've notified the site maintainer; reverted pkg to prior state.
Checked all the pkgsrc-official mirrors; they have the right sha1.
(I must not be having a good day. :)
module directory has changed (eg. "darwin-2level" vs.
"darwin-thread-multi-2level").
binary packages of perl modules need to be distinguishable between
being built against threaded perl and unthreaded perl, so bump the
PKGREVISION of all perl module packages and introduce
BUILDLINK_RECOMMENDED for perl as perl>=5.8.5nb5 so the correct
dependencies are registered and the binary packages are distinct.
addresses PR pkg/28619 from H. Todd Fujinaka.
Pod::Simple is a Perl library for parsing text in the Pod ("plain
old documentation") markup language that is typically used for
writing documentation for Perl and for Perl modules.
Pod formatters can use Pod::Simple to parse Pod documents into
produce renderings of them in plain ASCII, in HTML, or in any number
of other formats.
