pkglint --only "https instead of http" -r -F
With manual adjustments afterwards since pkglint 19.4.4 fixed a few
indentations in unrelated lines.
This mainly affects projects hosted at SourceForce, as well as
freedesktop.org, CTAN and GNU.
Problems found with existing digests:
Package fotoxx distfile fotoxx-14.03.1.tar.gz
ac2033f87de2c23941261f7c50160cddf872c110 [recorded]
118e98a8cc0414676b3c4d37b8df407c28a1407c [calculated]
Package ploticus-examples distfile ploticus-2.00/plnode200.tar.gz
34274a03d0c41fae5690633663e3d4114b9d7a6d [recorded]
da39a3ee5e6b4b0d3255bfef95601890afd80709 [calculated]
Problems found locating distfiles:
Package AfterShotPro: missing distfile AfterShotPro-1.1.0.30/AfterShotPro_i386.deb
Package pgraf: missing distfile pgraf-20010131.tar.gz
Package qvplay: missing distfile qvplay-0.95.tar.gz
Otherwise, existing SHA1 digests verified and found to be the same on
the machine holding the existing distfiles (morden). All existing
SHA1 digests retained for now as an audit trail.
gphoto2 2.5.8 release
* --keep-raw option added, which leaves non-JPEG files on camera during
capture or wait-event-and-download
* --show-preview option split out of --capture-preview. --show-preview
now displays the ascii art preview, --capture-preview no longer does.
* updated translations: french, ukrainian, vietnamese, russian, polish,
dutch, hungarian, esperanto, serbian, danish
gphoto2 2.5.6
* --wait-event / --wait-event-and-download can now wait for strings
--wait-event=CAPTURECOMPLETE
--wait-event=FILEADDED
--wait-event="Property 5001"
* updated translations: french, ukrainian, dutch, polish, russian, vietnamese, hungarian, serbian
gphoto2 2.5.5
* manpage updated
* updated translations
* bugfix for DST usage in handling date/time widgets
* adjusted wait time heuristics after capture
* --debug-loglevel=(debug|verbose|data|all) option added to select debug verbosity
* fixed --filename with cross-device usage
gphoto2 2.5.4
* --skip-existing option that skips if a local file would already exist
* %F for foldername inclusion added to format strings for --filename
* add the commandline arguments to the debug log
gphoto2 2.5.3
* translations updated: dutch, polish, ukrainian, russian, taiwanese
* small --show-info bugfix
gphoto2 2.5.2
* new --reset option to reset usb devices.
* using --filename, if the camera reports 1. Jan 1970, fall back to
use the current date/time.
* translations updated: french, polish, vietnamese, russian, simplified chinese, danish
gphoto2 2.5.1
* Fixed that the meaning of --keep and --no-keep was switched.
* Allow passing absolute filenames to
-p, -d, -r/--rmdir, -m/--mkdir, -t, --show-info, --get-metadata,
--get-raw-data, --get-audio-data,
like e.g.:
gphoto2 -p /store_00010001/DCIM/100D7000/DSC_0001.JPG
* -L --quiet now prints a list of all files, 1 per line.
* -l --quiet now prints a list of all folders, 1 per line.
gphoto2 2.5.0
* Added "--keep" and "--no-keep" options for capture tethered
and capture image.
* --wait-event and --capture-tethered can now do:
* nr of events (200)
* seconds (100s)
* milliseconds (200ms) (1/1000 of a second)
* frames (50f) (number of images)
* New --list-all-config gives the full config tree.
gphoto2 2.4.99.2
* Updated for new GPPortInfo in libgphoto2 2.5.0
* Updated for various changed file interfaces in libgphoto2 2.5.0
* Capture mainloop changed to handle JPEG+RAW capture (one release
resulting in 1 or more files).
(Also: refactored and rewritten to be more beautiful)
* Capture mainloop uses trigger capture + waitevent if present.
* Fixed use-after-free problem in file save
* Fixed %n to use an incremental counter, instead of a filesystem index.
gphoto2 2.4.10.1
* Switched %n behaviour to be linear increasing, instead of
a folder index.
gphoto2 2.4.10
* Event loop handling non-waitevent able cameras.
* --capture-movie (optional arguments: frames, or seconds)
now loops over preview capture as fast as possible
and writes the frames continously.
The resulting file is "MotionJPEG" and can be postprocessed
or displayed (by mplayer).
Also output to stdout is possible for pipeing like:
gphoto2 --stdout --capture-movie | someotherprogram
gphoto2 2.4.9
* Capture main event loop rewritten to always use wait event
to also support multiple image captures. (JPEG+RAW)
* Fixed various bugs and memory leaks.
* Translation updates.
gphoto2 2.4.8
* Output CAPTURECOMPLETE on waitevent
* On --filename "foo/bar/berk.jpg" create subdirectories if
not yet present.
* New shell command:
capture-preview
* Added Bulb Mode in interval capture with -B / --bulb <seconds>
gphoto2 2.4.7
* New cmdline options: --set-config-index and --set-config-value
to avoid ambiguity of the --set-config supporting both modes.
* --wait-event can take "5s" as argument for 5 seconds of event taking
* added --wait-event-and-download=x (same as --wait-event but with download)
* New shell commands:
wait-event (events or seconds)
wait-event-and-download (events or seconds)
capture-tethered
set-config-index entry=choiceindex
set-config-value entry=value
* Enhanced --quietness.
* Added AC_SYS_LARGEFILE, enabling support to download files > 2GB.
* Updated translations.
* Various bugfixes.
gphoto2 2.4.5
* Updated translations.
* Handle ctrl-c on tethered capture.
gphoto2 2.4.4
* Updated translations.
* SIGUSR2 added ... "exit interval capture after next shot"
gphoto2 2.4.3
* Updated translations.
* For multiple cameras, specifying with --port usb:xxx,yyy is now
sufficient (previously needed --port and --camera).
are replaced with .include "../../devel/readline/buildlink3.mk", and
USE_GNU_READLINE are removed,
* .include "../../devel/readline/buildlink3.mk" without USE_GNU_READLINE
are replaced with .include "../../mk/readline.buildlink3.mk".
changes:
-disable aalib by default
-"--list-all-config" to dump the full config tree + values
-bugfixes
-translation updates
pkgsrc note: dropped aalib support
alternative from mk/jpeg.buildlink3.mk
This allows selection of an alternative jpeg library (namely the x86 MMX,
SSE, SSE2 accelerated libjpeg-turbo) via JPEG_DEFAULT=libjpeg-turbo, and
follows the current standard model for alternatives (fam, motif, fuse etc).
The mechanical edits were applied via the following script:
#!/bin/sh
for d in */*; do
[ -d "$d" ] || continue
for i in "$d/"Makefile* "$d/"*.mk; do
case "$i" in *.orig|*"*"*) continue;; esac
out="$d/x"
sed -e 's;graphics/jpeg/buildlink3\.mk;mk/jpeg.buildlink3.mk;g' \
-e 's;BUILDLINK_PREFIX\.jpeg;JPEGBASE;g' \
< "$i" > "$out"
if cmp -s "$i" "$out"; then
rm -f "$out"
else
echo "Edited $i"
mv -f "$i" "$i.orig" && mv "$out" "$i"
fi
done
done
gphoto2 2.4.2
* Updated translations.
* Major change in behaviour:
--capture-image split into:
--capture-image : Just captures image, no download.
--capture-image-and-download : captures image and downloads it.
gphoto2 2.4.1
* Made capture preview that saves to files work
* capture-image has no arguments
* version check for libgphoto2 fixed
* cs,da,it,vi translations updated
gphoto2 2.4.0
* Add contrib/ directory with scripts and things contributed by users.
* New --storage-info function to get direct storage information from the
camera via API.
* Use SIGUSR1 to trigger premature image capture in --interval mode.
* New --reset-interval parameter makes SIGUSR1 reset the capture
interval.
* New --capture-tethered command to wait for presses of the camera
shutter button and download. Confirmed working only with Nikon DSC.
* Added --hook-script option, including man page update and test-hook.sh.
* Fix: --get-all-metadata takes no argument.
Changes 2.3.0:
* Require popt library to parse command line options.
* Partitioned command line options into groups of related options.
* Added --debug-logfile=FILENAME option.
* Only load all camlibs if necessary.
* (Half-)Fix to make --with-libgphoto2=PREFIX configure parameter work.
* Preliminary support for lower-case filenames in --filename pattern: %:
* Added "rmdir" command to gphoto2 --shell.
PKGLOCALEDIR and which install their locale files directly under
${PREFIX}/${PKGLOCALEDIR} and sort the PLIST file entries. From now
on, pkgsrc/mk/plist/plist-locale.awk will automatically handle
transforming the PLIST to refer to the correct locale directory.
developer is officially maintaining the package.
The rationale for changing this from "tech-pkg" to "pkgsrc-users" is
that it implies that any user can try to maintain the package (by
submitting patches to the mailing list). Since the folks most likely
to care about the package are the folks that want to use it or are
already using it, this would leverage the energy of users who aren't
developers.
file's sole purpose was to provide a dependency on pkg-config and set
some environment variables. Instead, turn pkg-config into a "tool"
in the tools framework, where the pkg-config wrapper automatically
adds PKG_CONFIG_LIBDIR to the environment before invoking the real
pkg-config.
For all package Makefiles that included pkg-config/buildlink3.mk, remove
that inclusion and replace it with USE_TOOLS+=pkg-config.
changes:
- New command line arguments:
--list-config - dump the configuration tree of the camera
--get-config var - get the configuration entry <var>
- New capture option:
--frames=count
--interval=seconds
-fixes
-new translations
"BUILDLINK_DEPENDS.libexif" because the package no longer works with old
version of the "libexif" packacke. Bump package revision because of
these changes.
in the process. (More information on tech-pkg.)
Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.
Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.
