appropriate OWN_DIRS_PERMS definition.
* Simplify the patches by overriding the value of CONFDIR at build time
and at installation time.
* Honor PKGINFODIR and PKGMANDIR.
Bump PKGREVISION to 4 due to INSTALL script changes.
INSTALL/DEINSTALL script creation within pkgsrc.
If an INSTALL or DEINSTALL script is found in the package directory,
it is automatically used as a template for the pkginstall-generated
scripts. If instead, they should be used simply as the full scripts,
then the package Makefile should set INSTALL_SRC or DEINSTALL_SRC
explicitly, e.g.:
INSTALL_SRC= ${PKGDIR}/INSTALL
DEINSTALL_SRC= # emtpy
As part of the restructuring of the pkginstall framework internals,
we now *always* generate temporary INSTALL or DEINSTALL scripts. By
comparing these temporary scripts with minimal INSTALL/DEINSTALL
scripts formed from only the base templates, we determine whether or
not the INSTALL/DEINSTALL scripts are actually needed by the package
(see the generate-install-scripts target in bsd.pkginstall.mk).
In addition, more variables in the framework have been made private.
The *_EXTRA_TMPL variables have been renamed to *_TEMPLATE, which are
more sensible names given the very few exported variables in this
framework. The only public variables relating to the templates are:
INSTALL_SRC INSTALL_TEMPLATE
DEINSTALL_SRC DEINSTALL_TEMPLATE
HEADER_TEMPLATE
The packages in pkgsrc have been modified to reflect the changes in
the pkginstall framework.
makeinfo if no native makeinfo executable exists. Honor TEXINFO_REQD
when determining whether the native makeinfo can be used.
* Remove USE_MAKEINFO and replace it with USE_TOOLS+=makeinfo.
* Get rid of all the "split" argument deduction for makeinfo since
the PLIST module already handles varying numbers of split info files
correctly.
NOTE: Platforms that have "makeinfo" in the base system should check
that the makeinfo entries of pkgsrc/mk/tools.${OPSYS}.mk are
correct.
config file, which we were skipping.
Changes from mgetty+sendfax-1.1.30:
Sat Jul 24 16:54:52 MEST 2004 Gert Doering <gert@greenie.muc.de>
* release 1.1.31
* doc/mgetty.texi-in: add section on isdn4linux and CAPI
Sat Jul 17 17:21:38 MEST 2004 Gert Doering <gert@greenie.muc.de>
* doc/sff2g3.1in: add man page for sff2g3
Sat Jul 17 12:18:28 MEST 2004 Andreas Barth <aba@not.so.argh.org>
* cnd.c: add "+CLIP:" string for caller ID
* voice/libvoice/detect.c: ATI codes for Zoom and Multitech modems
* voice/libvoice/V253modem.c: more flexible sample/s. handling
(old stuff was fixed at 7200 hz)
* voice/pvftools/pvftormd.c: accept 7200, 8000, 11025 Hz for "Lucent"
* fax/faxspool.in: use per-user .faxheader/.make.coverpg files
instead of global defaults (if per-user files exists)
Fri Jul 16 19:03:48 MEST 2004 Gert Doering <gert@greenie.muc.de>
* g3/Makefile: add "make test" test suite (for G3 tools)
* g3/sff2g3.c: NEW: converter from CAPI SFF fax format to raw G3
* Makefile: pack g3/sff2g3.c
Thu Feb 5 18:40:29 MET 2004 Gert Doering <gert@greenie.muc.de>
* fax/faxspool: rework umask saving/restoring (use subshell trick)
Sat Jan 10 00:01:25 MET 2004 Gert Doering <gert@greenie.muc.de>
* faxlib.c: add 1503 ID code (ZyXEL U-90E)
Tue Dec 16 12:46:52 MET 2003 Andreas Barth <aba+nospam@not.so.argh.org>
* Makefile: remove -DAUTO_PPP
* policy.h: include FIDO and AUTO_PPP here
Fri Dec 5 22:46:47 MET 2003 Ken Findlay <kjf@taylorbritt.com>
* login.c: empty lines should never match, not even empty user names
Mon Nov 17 20:08:59 MET 2003 Gert Doering
* mgetty.c: log warning if parent PID is not "1" (init)
* mgetty.cfg.in: add clarification about "direct yes" to sample cfg
Fri Nov 7 21:47:27 MET 2003 Andreas Barth <aba+nospam@not.so.argh.org>
* fax/faxspool.in: add per-user faxheader and coverpg files
* doc/faxspool.1in, mgetty.texi: document new feature
Thu Oct 9 12:44:47 MEST 2003 Gert Doering
* fax/faxspool.in: reject empty (0 bytes) input files
Sun Oct 5 13:59:51 MEST 2003 Gert Doering
* do_chat.c: make clean_line() logging show the timeout value
Mon Sep 29 23:36:34 MEST 2003 Andreas Barth
* contrib/g3tolj.c, g3toxwd.c: clean up protoypes and return types
* various .c files: integrate Debian cleanup fixes (usually
adding <string.h> and/or <stdlib.h> where missing)
Wed Aug 20 12:39:53 MEST 2003 Gert Doering (gert@greenie.muc.de)
* fax/faxrunqd.in: change signal handling - use HUP for graceful
exit, and dump statistics to logfile upon receipt of USR2
Sat Jun 28 22:14:35 MEST 2003 Gert Doering (gert@greenie.muc.de)
* fax/faxq-helper.c: honour user umask when spooling G3 files
(user decides whether group/other can read faxes)
* fax/faxspoool.in: reset umask after creating tmpdir (with umask 077)
* fax/faxq-helper.c: file name validation was overly strict -
accept anything that's printable, not a space, '/' or '\'
Thu Jun 12 16:56:44 MEST 2003 Gert Doering (gert@greenie.muc.de)
* faxlib.c: Multitech and USR return class 2.0/2.1 +FPS:<x>,<lc>
values in decimal, not hex -> change +FPS: parser to do decimal
for those modems (via modem_quirks |= MQ_FPS_NOT_HEX)
* fax_lib.h: add MQ_FPS_NOT_HEX modem quirk bit
* faxrec.c, faxrecp.c: understand VR=8 for "normal mode" (200x100 dpi)
Mon Apr 28 19:41:14 MEST 2003 Gert Doering (gert@greenie.muc.de)
* logname: make "buffer overrun" error message more precise
Wed Apr 23 10:49:25 MEST 2003 John R. Jackson <jrj@purdue.edu>
* voice/libutil/access.c: more verbose error reporting
Wed Apr 9 23:05:23 MEST 2003 Gert Doering (gert@greenie.muc.de)
* fax/faxspool.in: fix spooling without header line (-h -)
Sun Apr 6 16:09:14 MEST 2003 Andreas Barth <aba@not.so.argh.org>
* mgetty.8in, mgetty.texi-in: document escape sequences for
/etc/issue and login prompt.
Wed Mar 5 21:37:38 MET 2003 Gert Doering (gert@greenie.muc.de)
* Makefile: abort "make install" before installing faxspool
if fax user does not exist
* Makefile: unconditionally chown $FAX_SPOOL_OUT to fax user
Tue Feb 4 17:46:45 MET 2003 Gert Doering (gert@greenie.muc.de)
* fax/faxq-helper.c: uid=0 overrides access permission checks
* fax/faxrm.in: bugfix: get faxq-helper path from sedscript
Tue Jan 21 14:27:39 MET 2003 Gert Doering (gert@greenie.muc.de)
* fax/faxspool.in: abort with a proper error message on input file
names containing white space or quote characters
Tue Jan 14 14:30:42 MET 2003 Gert Doering (gert@greenie.muc.de)
* fax/faxrunqd.in: include "success" counter in per_phone_statistics
* ugly.h: #define USE_VARARGS for non-Ansi C compilers
* logfile.c: change #include<> sequence to catch USE_VARARGS def.
Wed Jan 8 23:03:26 MET 2003 Gert Doering (gert@greenie.muc.de)
* fax/faxrunqd.in: if a fax job fails, reschedule on different
modem (if possible)
* voice/libvoice/V253modem.c: fix ELSA_RMD_NAME (used for
V.253 modem <-> other modem RMD equivalency checks)
in the process. (More information on tech-pkg.)
Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.
Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.
"ChangeLog" since 1.1.28 w/dates and blank lines elided:
* release 1.1.30
* voice/vgetty/answer.c, voice/include/default.c: integrate Paul
Fox' pre_message and beep_sound patches
* voice/libvoice/detect.c: recognize MultiTech MT3334ZDXV
* faxhng.c: add some result codes for the i4l DIVA driver
* voice/libvoice/IS_101.c: fix DTMF events for the unshielded case
* voice/vgetty/answer.c: accept arbitrary ring types, not only 0..6
* ring.c: map DRON/DROF return codes to binary word, use result
as distinctive RING number
* frontends/www/README: add user authentication example
* voice/libvoice/V253modem.c: repair messed-up 16 bit PCM patch
* release 1.1.29
* voice/libvoice/detect.c: insert delay before sending ATE0 to
modem (timing issue - modem might not have sent the full \r\n
sequence from the last "OK" yet when the new AT comes in)
* doc/*.[158]in: bring man pages up to date
* tools/ltest.c, tools/mid.c: adapt to new lprintf() prototype
* mgetty.h, logfile.c: adapt to use <stdarg.h> and "..."
function declaration (unless USE_VARARGS is set, which is
needed for NeXT platforms). Karsten Keil <kkeil@suse.de>.
* Makefile: relax permissions on sendfax and faxrunq.config
install - must be readable/executeable by user "fax" now
* doc/faxrunqd.8in: document "-u", minor updates
* fax/faxrunqd.in, fax/faxspool.in, fax/faxrunq.in: revert
Aug 6, 200 change - put faxqueue_done back into $FAX_SPOOL_OUT/
(faxrunq/faxrunqd have no access rights to $VARRUNDIR/ anymore,
and $FAX_SPOOL_OUT is no longer world writeable anyway)
* fax/faxq.in: change from .last_run to faxqueue_done
* fax/faxrunqd.in: add "-u <user>" switch (set uid to <user>)
* fax/faxq-helper.c: finalize new fax queue handling using helper
process (suid fax) and a fax queue that is no longer
world-readable (open issue since 1994 :) )
* faxrecp.c: implement experimental teergrubing mode (signal
"page bad, please retransmit" at the end of each page - or just
hang up hard on caller). Activared with "modem-quirks 0x100"
or "0x200", respectively.
* voice/libvoice/V253Modem.c: add 16 bit linear PCM support
(patch coming from Peter Bruley)
* voice/pvftools/pvftormd.c, rmdtopvf.c: add 16 bit linear PCM
* rework faxq-helper concept (suid root -> suid fax)
* fax/faxq.in: adap "-r" to use faxq-helper
* fax/faxspool.in: adapt to use faxq-helper
* fax/faxrm.in: adapt to use faxq-helper
* Makefile: create FAX_SPOOL_OUT with mode 755 and owner FAX_OUT_USER
* Makefile: add FAX_OUT_USER definition, pass lots of variables
to fax/Makefile (for faxq-helper)
* README.1st: add instructions about FAX_OUT_USER setup
* doc/mgetty.texi-in add instructions about FAX_OUT_USER setup
* fax/faxrunqd.in: fix symlink / file overwrite race in JOB files.
Pointed out by Jablonovsky Alexander <sasha@cit-saratov.ru>
* doc/faxrunq.8in: point out insecurity in symlink handling
* mgetty.h: Intel 64bit platforms (__x86_64__) needs PTR_IS_LONG
* voice/libvoice/IS_101.c: implement DLE shielding for long DTMF tones
for V.253 (initially by Lee Howard <faxguy@howardsilvan.com>)
* mgetty.c: throw out DIST_RING #define - not used anymore
* ring.c: make sure action strings (CONNECT) are only recognized
at the beginning if a line, not in the middle (Paul Fox,
pgf@foxharp.boston.ma.us, CALLER NAME = CONNECTICUT).
* cnd.c: replace non-printable characters and quotes in caller ID
or caller name strings with ' ' - safeguard for passing them to
shell later on.
* doc/mgetty.texi-in: add stuff about recent multitech modems,
superfine+v.34 fax, and rework chapter about common problems
* faxlib.c: fix ugliness with USR modems reporting remote fax
ID as " 12345" -> skip leading '"' and all whitespace
* cnd.c: possible buffer overrun via CallName
(found by "A. Guru" <a.guru@sympatico.ca>)
* fax/faxrunqd: fix priority vs. write combining bug
* login.c: check for close-on-exec bit on FD 0 (FreeBSD 4.1 bug)
* login.c: export Caller Name as environment variable $CALLER_NAME
* login.c: make message about bad permissions even more clear
USE_PKGINSTALL is "YES". bsd.pkg.install.mk will no longer automatically
pick up a INSTALL/DEINSTALL script in the package directory and assume that
you want it for the corresponding *_EXTRA_TMPL variable.
building on a suggestion by Gert Doering, filling ut_pid with the pid
of the uucp-style lock holder. This should fix PR pkg/12261, although
you will need today's "w" to see any results. Bump PKGREVSION.
all dependencies on packages depending on "png" which contain shared
libraries, all for the (imminent) update to the "png" package.
[List courtesy of John Darrow, courtesy of "bulk-build".]
* release 1.1.28
* faxrec.c: replace "0"'s by "STDIN" (readability)
* doc/mgetty.texi-in: some updates
* doc/faxrunq.1in, doc/faxrunqd.8in: document calling convention
changes (as below)
* fax/faxrunq(d).in: pass (last) sendfax return code as 2nd
argument to success/failure program
* policy.h, utmp.c: incorporate some NetBSD changes
* various: change time() prototype to "time_t time(time_t *tloc)"
* mgetty.h, syslibs.h, logfile.c: some #ifdef fiddling for Darwin
* doc/faxrunq.1in, doc/faxrunqd.8in: document more stuff
* fax/faxrunq, fax/faxrunqd: don't run queue if a file
$FAX_SPOOL_OUT/stop exists.
* login.c: MAX_LOGIN_ARGS handling reworked (claimed N, but allowed
only N-1), plus warning message improved. <Juergen.Kosel@gmx.de>
* release 1.1.27
* doc/mgetty.texi-in: work on isdn4linux notes
* cnd.c (cndtable): add swedish ZyXEL caller ID format (T. Lundgren)
* cnd.c (cndtable): add "CALLED NUMBER:" (Jan Oberlaender/i4l)
* various: adaptions to OpenBSD (similar to NetBSD)
* mgetty.h: patch to adapt to Linux/S390 (PTR_IS_LONG)
* frontends/www/: integrate new version from Neko
conflict with the "efax" package. "efax" already has an "efax.1", the
actual man page, but "mgetty"'s "sendfax" manpage is "sendfax.8", so
"sendfax.1" is available. Closes PR pkg 14254.
Summary of changes:
- removal of USE_GTEXINFO
- addition of mk/texinfo.mk
- inclusion of this file in package Makefiles requiring it
- `install-info' substituted by `${INSTALL_INFO}' in PLISTs
- tuning of mk/bsd.pkg.mk:
removal of USE_GTEXINFO
INSTALL_INFO added to PLIST_SUBST
`${INSTALL_INFO}' replace `install-info' in target rules
print-PLIST target now generate `${INSTALL_INFO}' instead of `install-info'
- a couple of new patch files added for a handful of packages
- setting of the TEXINFO_OVERRIDE "switch" in packages Makefiles requiring it
- devel/cssc marked requiring texinfo 4.0
- a couple of packages Makefiles were tuned with respect of INFO_FILES and
makeinfo command usage
See -newly added by this commit- section 10.24 of Packages.txt for
further information.
the scripts/ directory, it will be run automatically as part of
the build process, by bsd.pkg.mk. There are now exactly 5 packages
in pkgsrc which use this facility, and yet, for every package build,
the existence of a script is checked by bsd.pkg.mk once before the
target is executed, and once afterwards. This incurs needless
overhead.
Move the separate pre- and post- script handling out of bsd.pkg.mk into
the individual package Makefiles, where it's much more obvious what is
happening, anyway.
foo-* to foo-[0-9]*. This is to cause the dependencies to match only the
packages whose base package name is "foo", and not those named "foo-bar".
A concrete example is p5-Net-* matching p5-Net-DNS as well as p5-Net. Also
change dependency examples in Packages.txt to reflect this.
time! -- save them by hand if you need them for this upgrade), add a
package hook to change ${CONFDIR}, where the binaries look for their
configuration files, and update to 1.1.26. Many bug fixes and improved
compatibility with various modems. The following were culled from the
extensive ChangeLog file's for being conceivably of general interest.
* login.c: export current tty as $DEVICE to shell
* dialin.config: added V253 codes for OUT_OF_AREA and PRIVATE.
* getdisk.c: fix overflow on file systems with > 2G (2^31 bytes) free
* getdisk.c: default MINFREESPACE from policy.h was interpreted
as *bytes*, not as *kbytes*. Which kind of defeats the purpose
of checking for "enough disk space". Fixed, work with kbytes now.
* faxrecp.c: check access rights first, space second (this will
give clearer log messages for non-existing directories)
* faxrecp.c: change fax page writing to open( O_EXCL|O_CREAT )
* locks.c: use mkstemp() to create tmp file, if available,
open( O_EXCL|O_CREAT ) otherwise.
and for vgetty...
* Fixed buffer overflow in vm and vgetty, submitted by Georg
Kirschbaum, <Georg.Kirschbaum@gimmel.franken.de>. Impact would
not have been very big since only DTMFs are under control
of the user.
