-----------------------------
(from doc/xnec2c.html)
Version 3.5.1:
After a request by FanJun BH1SCW, I replaced the original
makeshift desktop icon with one provided by Serge ON4AA.
- drop patch, seems included in upstream with condition:
#if !GLIB_CHECK_VERSION(2,32,0)
(upstream)
- Updated ham/grig to 0.8.1
-------------------------
GRIG 0.8.1:
- Maintenance update
- French l10n
-----------------------------
(from doc/xnec2c.html)
Version 3.5:
I modified the NEC2 Editor code so that when a Geometry or
Command editor window is opened, activating Apply or OK will
save data in the editor window to the treeview, even if the
default data is not edited.
I modified the NEC2 Editor code so that if a treeview row is
removed while the relevant editor window is open, then
activating Apply or OK will not attempt to save data to the
treeview, since this will cause an illegal memory access and
will crash xnec2c.
Fixed a bug in the Helix editor which caused incorrect
calculation of the segment length as a percentage of
wavelength or of the number of segments/turn that correspond
to a given segment length as a percentage of wavelength.
-------------------------
## 003.009.004
- GPIO control: Fix address mismatch for RX and full duplex.
This fixes full-duplex mode for most devices.
- B200: Fixed auto rate selection (can now select 61.44 Msps)
- UBX: Fix member declaration order which could cause
segfaults for debug builds
- Manual/Docs: Numerous fixes, use dot for graphs in manual
- Utils: multiple fixes for query_gpsdo_sensors, fixed floating point
comparison
- Windows: Include registry file in installation
- Converters: Improve NEON converters
------------------------
## 003.009.003
* UBX: Fixed a phase synchronization issue on the sub-1GHz band
* USB: Fixed transport issue that crashed when multiple USB devices were
connected on a Windows machine, more graceful handling of USB disconnects,,
provided .cdf file for installing on Windows
* B200: Fixed memory growth/increasing tune times issue
* E300: Fixed memory leak with udev, fixed issue with autoboot value, fixes
to button behaviour
* usrp2, usrp3: Fixed IQ imbalance and DC bias in DDC chain
* CMake: Windows registry fixes
* Fixed several compiler warnings and minor bugs
* Examples: Updated benchmark_rate for improved thread safety
prerequisite (buildlink3). Thanks Dave Tyson for the report at pkgsrc-users@.
PKGREVISION++. Those two depends on gnuradio-fec, so the same situation as it.
(PLIST of these two are NOT affected, but actuall installation PLIST will
be different because of gnuradio-fec is also installed with those).
-----------------------------------------------------------------
Following is not for explicit 2.2.1 release but for 2.2,
(attached to mail from Rick Murphy on 2015/12/31 as
Subject: TrustedQSL 2.2 final release is available for download)
-----------------------------------------------------------------
Trusted QSL V2.2 Release Notes
This version of Trusted QSL (TQSL) has corrections for defects found since
TQSL 2.1 was released (including the updates made for TQSL 2.1.1, 2.1.2,
and 2.1.3) as well as improvements to permit TQSL and Logbook of the World
to support the National Parks on the Air competition.
TQSL 2.2 can be installed to upgrade any older version of TQSL. Downgrade
to TQSL 2.1.3 can be seamlessly performed by uninstalling TQSL 2.2 and
reinstalling TQSL 2.1.3.
On all three supported platforms (Windows, MacOS, and Linux), installing
TQSL 2.2 will replace older versions of Trusted QSL while preserving your
Callsign Certificates, Station Locations, and preferences. On Windows,
simply run the TQSL 2.2 installer, which will automatically uninstall
older versions of TQSL (and, if installed, TQSLCert). On Mac OS X, open
the disk image (.dmg) file and drag the "Trusted QSL" folder to your
Applications folder. Direct the installer to "Replace All", which will
uninstall old files. For Linux systems, unpack the tar file and read the
INSTALL file for directions.
The following list describes the major changes in the v2.2
release of Trusted QSL.
TQSL changes
Defects Corrected:
Fix a defect that could cause saving of Calllsign Certificate private keys
to be suppressed.
When renewing a Callsign Certificate, entering an invalid password would
display an incorrect "Invalid Argument" error versus displaying the proper
"Invalid password" error. Under some circumstances, this could cause the
related Callsign Certificate to be lost.
Accept C7 and 4Y as valid callsign prefixes.
When installing a Callsign Certificate fails, display the callsign and
serial number to facilitate troubleshooting.
When deleting Callsign Certificates and Station Locations, save a copy to
allow those to be restored.
Reject QSOs that do not specify at least mode, band, date, and time.
Correct the TQSL ADIF editor to not use the local decimal point separator
for frequencies, as ADIF requires a period(.).
Major feature Additions:
Use Portuguese (Portugal) translations contributed by Nuno, CT2IRY.
Allow multiple dependent fields on a station location screen. This allows
both a county and a park entry to be modified when the US state changes
for a US Station Location.
- Drop two patches,
they are now included (but not exactly the same as our patches).
(upstream)
- Update 3.23.07 to 3.23.08
-------------------------
=Version 3.23.08=
2016-02-21 Rik van Riel <riel@surriel.com>
bbbeed4: NAVTEX update
2016-02-16 David Freese <iam_w1hkj@w1hkj.com>
5b2edad: Save Logbook
1c8e0e9: Analysis mode
0f650e9: flrig PTT
106e3e2: flrig waiting
71fa224: COM port close
dd1165a: fsq repeat last
fb0fd4c: Mac Logger
2016-02-04 Jonathan Wakely <redi@users.sf.net>
813b58a: GCC 6 build
2016-02-01 David Freese <iam_w1hkj@w1hkj.com>
d808977: CALL capture
bea9cfe: Scope View
8bcc9e8: RigCAT modifications
Packaging changes:
Drop MAKE_JOBS_SAFE=no; it seems to build fine with -j4.
Clean up workarounds for resolved issues.
Drop rpc conditional, because upstream removed rpc entirely
Upstream changes:
Many bug fixes and new radios.
Drop RPC.
Rototill build system.
Add readline support (not packaged yet).
Change to single library instead of many.
----------------------------
ChangeLog is the same as 3.23.07.19 to 3.23.07.21
Previous commit log has confusion on version numbers. It was really
3.23.07.19 to 3.23.07.21.
(From now on, avoid picking 4 digit version, they are alpha, thanks Robert Elz)
---------------------
## 003.009.002
* E310: Added support for Speedgrade 3
* B205mini: Added support
* E310: Fixed reference counting bug
* B210: Fixed external clock reference bug for devices using ADF4002 PLLs
* B210: Fixed codec loopback test
* OctoClock: Fixed firmware burning on Windows
* B2XX, E3XX, X3XX: Easier time-syncing features. Fixes bug where B210s would
only run after issuing set_time_unknown_pps().
* X3XX: Fixed bug for IQ imbalance correction
* E310: DRAM testbenching
* Docs/Manual: Many updates and fixes
