Remove bogus removal of dlpisubs.c, and force the configure script to
avoid any getifaddrs implementation on SunOS which would result in it
not being included.
Fixes build on SunOS. Thanks to Jörn Clausen for testing on Solaris 10.
Bump PKGREVISION. Approved during freeze by wiz.
Add netfilter/nfqueue interface.
If we don't have support for IPv6 address resolution, support,
in filter expressions, what IPv6 stuff we can.
Checks added for malloc()/realloc()/etc. failures.
Fix pcap-config to include -lpthread if canusb support is
present
Try to fix "pcap_parse not defined" problems when --without-flex
and --without-bison are used when you have Flex and Bison
Fix some issues with the pcap_loop man page.
Fix pcap_getnonblock() and pcap_setnonblock() to fill in the
supplied error message buffer
Fix typo that, it appeared, would cause pcap-libdlpi.c not to
compile (perhaps systems with libdlpi also have BPF and use
that instead)
Catch attempts to call pcap_compile() on a non-activated pcap_t
Fix crash on Linux with CAN-USB support without usbfs
Fix addition of VLAN tags for Linux cooked captures
Check for both EOPNOTSUPP and EINVAL after SIOCETHTOOL ioctl, so
that the driver can report either one if it doesn't support
SIOCETHTOOL
Add DLT_INFINIBAND and DLT_SCTP
Describe "proto XXX" and "protochain XXX" in the pcap-filter man
page
Handle either directories, or symlinks to directories, that
correspond to interfaces in /sys/class/net
Fix handling of VLAN tag insertion to check, on Linux 3.x
kernels, for VLAN tag valid flag
Clean up some man pages
Support libnl3 as well as libnl1 and libnl2 on Linux
it will fallback to "yacc" (instead of "bison") and the library will
not link properly. This problem is probably only visible under Solaris
where "lex" is not "flex".
Bump package revision because of this fix.
Summary for 1.3.0 libpcap release
Handle DLT_PFSYNC in {FreeBSD, other *BSD+Mac OS X, other}.
Linux: Don't fail if netfilter isn't enabled in the kernel.
Add new link-layer type for NFC Forum LLCP.
Put the CANUSB stuff into EXTRA_DIST, so it shows up in the release tarball.
Add LINKTYPE_NG40/DLT_NG40.
Add DLT_MPEG_2_TS/LINKTYPE_MPEG_2_TS for MPEG-2 transport streams.
[PATCH] Fix AIX-3.5 crash with read failure during stress
AIX fixes.
Introduce --disable-shared configure option.
Added initial support for canusb devices.
Include the pcap(3PCAP) additions as 1.2.1 changes.
many updates to documentation: pcap.3pcap.in
Improve 'inbound'/'outbound' capture filters under Linux.
Note the cleanup of handling of new DLT_/LINKTYPE_ values.
On Lion, don't build for PPC.
For mac80211 devices we need to clean up monitor mode on exit.
Summary for 1.2.1 libpcap release
Update README file.
Fix typoes in README.linux file.
Clean up some compiler warnings.
Fix Linux compile problems and tests for ethtool.h.
Treat Debian/kFreeBSD and GNU/Hurd as systems with GNU
toolchains.
Support 802.1 QinQ as a form of VLAN in filters.
Treat "carp" as equivalent to "vrrp" in filters.
Fix code generated for "ip6 protochain".
Add some new link-layer header types.
Support capturing NetFilter log messages on Linux.
Clean up some error messages.
Turn off monitor mode on exit for mac80211 interfaces on Linux.
Fix problems turning monitor mode on for non-mac80211 interfaces
on Linux.
Properly fail if /sys/class/net or /proc/net/dev exist but can't
be opened.
Fail if pcap_activate() is called on an already-activated
pcap_t, and add a test program for that.
Fix filtering in pcap-ng files.
Don't build for PowerPC on Mac OS X Lion.
Simplify handling of new DLT_/LINKTYPE_ values.
Expand pcap(3PCAP) man page.
Summary for 1.2 libpcap release
All of the changes listed below for 1.1.1 and 1.1.2.
Changes to error handling for pcap_findalldevs().
Fix the calculation of the frame size in memory-mapped captures.
Add a link-layer header type for STANAG 5066 D_PDUs.
Add a link-layer type for a variant of 3GPP TS 27.010.
Noted real nature of LINKTYPE_ARCNET.
Add a link-layer type for DVB-CI.
Fix configure-script discovery of VLAN acceleration support.
see http://netoptimizer.blogspot.com/2010/09/tcpdump-vs-vlan-tags.html
Linux, HP-UX, AIX, NetBSD and OpenBSD compilation/conflict fixes.
Protect against including AIX 5.x's <net/bpf.h> having been included.
Add DLT_DBUS, for raw D-Bus messages.
Treat either EPERM or EACCES as "no soup for you".
Changes to permissions on DLPI systems.
Add DLT_IEEE802_15_4_NOFCS for 802.15.4 interfaces.
* Fix build on RHEL5.
* Fix shared library build on AIX.
Changes 1.1.0:
* Add SocketCAN capture support
* Add Myricom SNF API support
* Update Endace DAG and ERF support
* Add support for shared libraries on Solaris, HP-UX, and AIX
* Build, install, and un-install shared libraries by default;
don't build/install shared libraries on platforms we don't support
* Fix building from a directory other than the source directory
* Fix compiler warnings and builds on some platforms
* Update config.guess and config.sub
* Support monitor mode on mac80211 devices on Linux
* Fix USB memory-mapped capturing on Linux; it requires a new DLT_
value
* On Linux, scan /sys/class/net for devices if we have it; scan
it, or /proc/net/dev if we don't have /sys/class/net, even if
we have getifaddrs(), as it'll find interfaces with no
addresses
* Add limited support for reading pcap-ng files
* Fix BPF driver-loading error handling on AIX
* Support getting the full-length interface description on FreeBSD
* In the lexical analyzer, free up any addrinfo structure we got back
from getaddrinfo().
* Add support for BPF and libdlpi in OpenSolaris (and SXCE)
* Hyphenate "link-layer" everywhere
* Add /sys/kernel/debug/usb/usbmon to the list of usbmon locations
* In pcap_read_linux_mmap(), if there are no frames available, call
poll() even if we're in non-blocking mode, so we pick up
errors, and check for the errors in question.
* Note that poll() works on BPF devices is Snow Leopard
* If an ENXIO or ENETDOWN is received, it may mean the device has
gone away. Deal with it.
* For BPF, raise the default capture buffer size to from 32k to 512k
* Support ps_ifdrop on Linux
* Added a bunch of #ifdef directives to make wpcap.dll (WinPcap) compile
under cygwin.
* Changes to Linux mmapped captures.
* Fix bug where create_ring would fail for particular snaplen and
buffer size combinations
* Update pcap-config so that it handles libpcap requiring
additional libraries
* Add workaround for threadsafeness on Windows
* Add missing mapping for DLT_ENC <-> LINKTYPE_ENC
* DLT: Add DLT_CAN_SOCKETCAN
* DLT: Add Solaris ipnet
* Don't check for DLT_IPNET if it's not defined
* Add link-layer types for Fibre Channel FC-2
* Add link-layer types for Wireless HART
* Add link-layer types for AOS
* Add link-layer types for DECT
* Autoconf fixes (AIX, HP-UX, OSF/1, Tru64 cleanups)
* Install headers unconditionally, and include vlan.h/bluetooth.h if
enabled
* Autoconf fixes+cleanup
This changes the buildlink3.mk files to use an include guard for the
recursive include. The use of BUILDLINK_DEPTH, BUILDLINK_DEPENDS,
BUILDLINK_PACKAGES and BUILDLINK_ORDER is handled by a single new
variable BUILDLINK_TREE. Each buildlink3.mk file adds a pair of
enter/exit marker, which can be used to reconstruct the tree and
to determine first level includes. Avoiding := for large variables
(BUILDLINK_ORDER) speeds up parse time as += has linear complexity.
The include guard reduces system time by avoiding reading files over and
over again. For complex packages this reduces both %user and %sys time to
half of the former time.
* Compile with IPv6 support by default
* Compile with large file support on by default
* Add pcap-config script, which deals with -I/-L flags for compiling
* DLT: Add IPMB
* DLT: Add LAPD
* DLT: Add AX25 (AX.25 w/KISS header)
* DLT: Add JUNIPER_ST
* 802.15.4 support
* Variable length 802.11 header support
* X2E data type support
* SITA ACN Interface support - see README.sita
* Support for zerocopy BPF on platforms that support it
* Better support for dealing with VLAN tagging/stripping on Linux
* Fix dynamic library support on OSX
* Change build process to put public libpcap headers into pcap subir
* DLT: Add value for IPMI IPMB packets
* DLT: Add value for u10 Networks boards
* Require <net/pfvar.h> for pf definitions - allows reading of pflog formatted
libpcap files on an OS other than where the file was generated
libpcap
Wed. July 23, 2007. mcr@xelerance.com. Summary for 0.9.7 libpcap release
FIXED version file to be 0.9.7 instead of 0.9.5.
added flags/configuration for cloning bpf device.
added DLT_MTP2_WITH_PHDR support (PPI)
"fix" the "memory leak" in icode_to_fcode() -- documentation bug
Various link-layer types, with a pseudo-header, for SITA http://www.sita.aero/
introduces support for the DAG ERF type TYPE_COLOR_MC_HDLC_POS.
Basic BPF filtering support for DLT_MTP2_WITH_PHDR is also added.
check for IPv4 and IPv6, even for DLT_RAW
add support for DLT_JUNIPER_ISM
Pick up changes from NetBSD: many from tron, christos, drochner
Allocate DLT_ for 802.15.4 without any header munging, for Mikko Saarnivala.
Header for 802.16 MAC Common Part Sublayer plus a radiotap radio header
Wed. April 25, 2007. ken@xelerance.com. Summary for 0.9.6 libpcap release
Put the public libpcap headers into a pcap subdirectory in both the
source directory and the target include directory, and have include
files at the top-level directory to include those headers, for
backwards compatibility.
Add Bluetooth support
Add USB capturing support on Linux
Add support for the binary USB sniffing interface in Linux
Add support for new FreeBSD BIOCSDIRECTION ioctl
Add additional filter operations for 802.11 frame types
Add support for filtering on MTP2 frame types
Propagate some changes from the main branch, so the x.9 branch has
all the DLT_ and LINKTYPE_ values that the main branch does
Reserved a DLT_ and SAVEFILE_ value for PPI (Per Packet Info)
encapsulated packets
Add LINKTYPE_ for IEEE 802.15.4, with address fields padded as done
by Linux drivers
Add LINKTYPE_ value corresponding to DLT_IEEE802_16_MAC_CPS.
Add DLT for IEEE 802.16 (WiMAX) MAC Common Part Sublayer
Add DLT for Bluetooth HCI UART transport layer
When building a shared library, build with "-fPIC" on Linux to support x86_64
Link with "$(CC) -shared" rather than "ld -shared" when building a
".so" shared library
Add support for autoconf 2.60
Fixes to discard unread packets when changing filters
Changes to handle name changes in the DAG library resulting from
switching to libtool.
Add support for new DAG ERF types.
Add an explicit "-ldag" when building the shared library, so the DAG
library dependency is explicit.
Mac OSX fixes for dealing with "wlt" devices
Fixes in add_or_find_if() & pcap_findalldevs() to optimize generating
device lists
Fixed a bug in pcap_open_live(). The return value of PacketSetHwFilter
was not checked.
Fix compiling on AIX (, at end of ENUM)
Updated list of DNS RR typecodes
Use local Ethernet defs on WIN32
Add support for Frame-Relay ARP
Fixes for compiling under MSVC++
Add support for parsing Juniper .pcap files
Add support for FRF.16 Multilink Frame-Relay (DLT_MFR)
Rework the OSPFv3 printer
Fix printing for 4.4BSD/NetBSD NFS Filehandles
Add support for Cisco style NLPID encapsulation
Add cisco prop. eigrp related, extended communities
Add support for BGP signaled VPLS
Cleanup the bootp printer
Add support for PPP over Frame-Relay
Add some bounds checking to the IP options code, and clean up
the options output a bit.
Add additional modp groups to ISAKMP printer
Add support for Address-Withdraw and Label-Withdraw Msgs
Add support for the BFD Discriminator TLV
Fixes for 64bit compiling
Add support for PIMv2 checksum verification
Add support for further dissection of the IPCP Compression Option
Add support for Cisco's proposed VQP protocol
Add basic support for keyed authentication TCP option
Lots of minor cosmetic changes to output printers
and add a new helper target and script, "show-buildlink3", that outputs
a listing of the buildlink3.mk files included as well as the depth at
which they are included.
For example, "make show-buildlink3" in fonts/Xft2 displays:
zlib
fontconfig
iconv
zlib
freetype2
expat
freetype2
Xrender
renderproto
RECOMMENDED is removed. It becomes ABI_DEPENDS.
BUILDLINK_RECOMMENDED.foo becomes BUILDLINK_ABI_DEPENDS.foo.
BUILDLINK_DEPENDS.foo becomes BUILDLINK_API_DEPENDS.foo.
BUILDLINK_DEPENDS does not change.
IGNORE_RECOMMENDED (which defaulted to "no") becomes USE_ABI_DEPENDS
which defaults to "yes".
Added to obsolete.mk checking for IGNORE_RECOMMENDED.
I did not manually go through and fix any aesthetic tab/spacing issues.
I have tested the above patch on DragonFly building and packaging
subversion and pkglint and their many dependencies.
I have also tested USE_ABI_DEPENDS=no on my NetBSD workstation (where I
have used IGNORE_RECOMMENDED for a long time). I have been an active user
of IGNORE_RECOMMENDED since it was available.
As suggested, I removed the documentation sentences suggesting bumping for
"security" issues.
As discussed on tech-pkg.
I will commit to revbump, pkglint, pkg_install, createbuildlink separately.
Note that if you use wip, it will fail! I will commit to pkgsrc-wip
later (within day).
developer is officially maintaining the package.
The rationale for changing this from "tech-pkg" to "pkgsrc-users" is
that it implies that any user can try to maintain the package (by
submitting patches to the mailing list). Since the folks most likely
to care about the package are the folks that want to use it or are
already using it, this would leverage the energy of users who aren't
developers.
so make it equivalent to pkgsrc version 0.9.3nb1
(it does so on Debian, and will do on NetBSD; if it doesn't hold
on _your_OS_, we'll need conditionals)
From CHANGES:
Mon. September 5, 2005. ken@xelerance.com. Summary for 0.9.4 libpcap release
Support for radiotap on Linux (Mike Kershaw)
Fixes for HP-UX
Support for additional Juniper link-layer types
Fixes for filters on MPLS-encapsulated packets
"vlan" filter fixed
"pppoed" and "pppoes" filters added; the latter modifies later
parts of the filter expression to look at the PPP headers and
headers in the PPP payload
