pkgsrc/bootstrap/README.OpenServer5
gdt f8b97ff054 bootstrap: Separate UnixWare and OpenServer
Add a skeletal UnixWare README.  Undo my previous confusion.
2022-04-01 17:19:28 +00:00

247 lines
9.4 KiB
Text

$NetBSD: README.OpenServer5,v 1.4 2022/04/01 17:19:28 gdt Exp $
XXX You should change your /bin/sh to shells/pdksh under OpenServer 5.0.7/3.2!!
Supported platforms
===================
- Xinuos SCO OpenServer 5.0.7/3.2
Prerequisite softwares
======================
- SCO OpenServer 5 Development System with Maintenance Pack 4 update
- GCC 4.2.4
- GNU binutils 2.24
Compiler
========
C compiler that is shipped with OpenServer 5 Development System cannot
build pkgsrc/devel/bmake. Please use GCC 4.2.4 built from scratch.
You can follow "How to build gcc-4.2.4 for SCO OpenServer 5.0.7/.3.2"
steps.
Prebuilt GCC is not available, because it contains proprietary header files
in its directory structure (GCC fixincludes mechanism).
Selecting which ABI to use
==========================
Xinuos SCO OpenServer 5.0.7 can handle COFF and ELF binaries.
I have tested only ELF binaries.
But OpenServer 5.0.7's native CC generates COFF by default.
Start bootstrapping pkgsrc
==========================
PREFER_PKGSRC=yes build is recommended.
# ./bootstrap --prefer-pkgsrc yes
And you must remove libtool-base that is built and installed during
bootstrap with
$ pkg_delete -ff libtool-base
It contains the path to bootstrap working directory and does not work properly.
And rm command cannot accept "rm -f". You should install sysutils/coreutils
and put the following line to your mk.conf.
TOOLS_PLATFORM.rm?=/a/pkg/bin/grm
How to build gcc-4.2.4 for SCO OpenServer 5.0.7/3.2
====================================================
To follow these steps, you must have SCO OpenServer 5 Development System.
OpenServer 5.0.7's tar command does not support builtin gzip or bzip2
support. You should use pipe.
$ gzcat make-3.79.1.tar.gz | tar xvf -
For configure newer GNU packages, you should replace your /bin/sh with
ksh from pkgsrc/shells/pdksh!!
1. Build GNU make 3.79.1 from make-3.79.1.tar.gz
Use OpenServer's native CC, AS, LD, and MAKE.
$ cd make-3.79.1
$ ./configure --prefix=$HOME/tools
$ make
$ make install
2. Build GCC 2.95.3 C compiler from GNU official gcc-core-2.95.3.tar.gz
with minimal patch (*1)
Use OpenServer's native CC, AS, LD, and GNU make.
In this stage, you cannot build C++ compiler with internel compiler error.
$ mkdir build0
$ cd build0
$ PATH=$HOME/tools/bin:$PATH ../gcc-2.95.3/configure --prefix=$HOME/tools
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make install
3. Build GCC 2.95.3 C and C++ compilers from GNU official
gcc-core-2.95.3.tar.gz and gcc-g++-2.95.3.tar.gz with minimal patch
(*1 and *2)
Use OpenServer's native AS, LD, GCC, and GNU make.
In this stage, you can build C++ compiler with GCC C compiler.
$ mkdir build1
$ cd build1
$ PATH=$HOME/tools/bin:$PATH ../gcc-2.95.3/configure --prefix=$HOME/tools
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make install
4. Build GNU m4 1.4.3 from m4-1.4.3.tar.gz
Use OpenServer's native AS, LD, GNU make, and GCC.
$ cd m4-1.4.3
$ PATH=$HOME/tools/bin:$PATH ./configure --prefix=$HOME/tools
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make install
5. Build GNU bison 2.0 from bison-2.0.tar.gz
Use OpenServer's native AS, LD, GNU make, and GCC.
$ cd bison-2.0
$ PATH=$HOME/tools/bin:$PATH ./configure --prefix=$HOME/tools
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make install
6. Build flex 2.5.4 from flex-2.5.4a.tar.bz2
Use OpenServer's native AS, LD, GNU make, and GCC.
$ cd flex-2.5.4a
$ PATH=$HOME/tools/bin:$PATH ./configure --prefix=$HOME/tools
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make install
7. Build texinfo 4.8 with texinfo-4.8.tar.gz
Use OpenServer's native AS, LD, GNU make, and GCC.
$ cd texinfo-4.8
$ PATH=$HOME/tools/bin:$PATH ./configure --prefix=$HOME/tools
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make install
8. Build GNU gperf 2.7.2 from gperf-2.7.2.tar.gz
Use OpenServer's native AS, LD, GNU make, and GCC (including g++).
$ cd gperf-2.7.2
$ PATH=$HOME/tools/bin:$PATH ./configure --prefix=$HOME/tools
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make install
9. Build GCC 2.95.3pl4 (bootstrap) from Xinuos gnutools-5.0.7Kj-SRC.tar.bz2
Use OpenServer's native LD, AS, GNU make, and GCC.
$ mkdir build2
$ cd build2
$ PATH=$HOME/tools/bin:$PATH ../gcc-2.95.3/configure --prefix=$HOME/tools
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make bootstrap
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make install
10. Build GNU binutils 2.14pl1 from Xinuos gnutools-5.0.7Kj-SRC.tar.bz2
Use OpenServer's native LD, AS, GNU make, and GCC.
LD from binutils is not available.
$ mkdir binutils-build0
$ cd binutils-build0
$ PATH=$HOME/tools/bin:$PATH ../binutils-2.14/configure --prefix=$HOME/tools2
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make
$ PATH=$HOME/tools/bin:$PATH $HOME/tools/bin/make install
11. Build GCC 2.95.3pl4 (bootstrap) again
Use OpenServer's native LD, GNU binutils (AS), GNU make, and GCC.
$ mkdir build3
$ cd build3
$ PATH=$HOME/tools2/bin:$HOME/tools/bin:$PATH ../gcc-2.95.3/configure --prefix=$HOME/tools2 --with-gnu-as
$ PATH=$HOME/tools2/bin:$HOME/tools/bin:$PATH $HOME/tools/bin/make bootstrap
$ PATH=$HOME/tools2/bin:$HOME/tools/bin:$PATH $HOME/tools/bin/make install
12. Build GNU binutils 2.14pl1 from Xinuos gnutools-5.0.7Kj-SRC.tar.bz2
Use OpenServer's native LD, AS, GNU make, and GCC.
$ mkdir binutils-build1
$ cd binutils-build1
$ PATH=$HOME/tools2/bin:$PATH ../binutils-2.14/configure --prefix=$HOME/tools3
$ PATH=$HOME/tools2/bin:$PATH $HOME/tools/bin/make
$ PATH=$HOME/tools2/bin:$PATH $HOME/tools/bin/make install
13. Build GCC 4.2.4 with patch (*3)
Use OpenServer's native LD, GNU binutils (AS), GNU make, and GCC.
XXX You cannot use native TAR to extract GCC 4.2.4's tar ball!!
$ mkdir 42build0
$ cd 42build0
$ PATH=$HOME/tools3/bin:$HOME/tools2/bin:$HOME/tools/bin:$PATH ../gcc-4.2.4/configure --prefix=$HOME/tools3 --with-gnu-as --disable-nls --enable-languages=c
$ PATH=$HOME/tools3/bin:$HOME/tools2/bin:$HOME/tools/bin:$PATH $HOME/tools/bin/make
$ PATH=$HOME/tools3/bin:$HOME/tools2/bin:$HOME/tools/bin:$PATH $HOME/tools/bin/make install
14. Build GNU binutils 2.24 with patch (*4)
Use OpenServer's native LD, GNU binutils (AS), GNU make, and GCC.
$ mkdir 224binutils
$ cd 224binutils
$ PATH=$HOME/tools3/bin:$HOME/tools/bin:$PATH ../binutils-2.24/configure --prefix=$HOME/tools4 --disable-nls --disable-werror
$ PATH=$HOME/tools3/bin:$HOME/tools/bin:$PATH ~/tools/bin/make
$ PATH=$HOME/tools3/bin:$HOME/tools/bin:$PATH ~/tools/bin/make install
15. Build GCC 4.2.4 (bootstrap) with patch (*3)
Use OpenServer's native LD, GNU binutils (AS), GNU make, and GCC.
$ mkdir 42build1
$ cd 42build1
$ PATH=$HOME/tools3/bin:$HOME/tools/bin:$PATH ../gcc-4.2.4/configure --prefix=$HOME/tools4 --with-gnu-as --disable-nls --enable-languages=c
$ PATH=$HOME/tools3/bin:$HOME/tools/bin:$PATH $HOME/tools/bin/make bootstrap
$ PATH=$HOME/tools3/bin:$HOME/tools/bin:$PATH $HOME/tools/bin/make install
16. Build GNU binutils 2.24 with patch (*4)
Use OpenServer's native LD, GNU binutils (AS), GNU make, and GCC.
$ mkdir 224binutils
$ cd 224binutils
$ PATH=$HOME/tools4/bin:$HOME/tools/bin:$PATH ../binutils-2.24/configure --prefix=/opt/prebuilt --disable-nls --disable-werror
$ PATH=$HOME/tools4/bin:$HOME/tools/bin:$PATH ~/tools/bin/make
# PATH=$HOME/tools4/bin:$HOME/tools/bin:$PATH ~/tools/bin/make install
17. Build GNU gmp 4.2.4 from gmp-4.2.4.tar.gz
Use OpenServer's native LD, GNU binutils (AS), GNU make, and GCC.
$ cd gmp-4.2.4
$ PATH=/opt/prebuilt/bin:$PATH ./configure --prefix=/opt/prebuilt --build=i386-pc-sco3.2v5.0.7
$ PATH=$HOME/tools4/bin:$HOME/tools/bin:$PATH ~/tools/bin/make
# PATH=$HOME/tools4/bin:$HOME/tools/bin:$PATH ~/tools/bin/make install
18. Build mpfr 2.3.2 from mpfr-2.3.2.tar.gz
Use OpenServer's native LD, GNU binutils (AS), GNU make, and GCC.
$ cd mpfr-2.3.2
$ PATH=/opt/prebuilt/bin:$PATH ./configure --prefix=/opt/prebuilt
$ PATH=$HOME/tools4/bin:$HOME/tools/bin:$PATH ~/tools/bin/make
# PATH=$HOME/tools4/bin:$HOME/tools/bin:$PATH ~/tools/bin/make install
19. Build GNU mpc 0.8.2 from mpc-0.8.2.tar.gz
Use OpenServer's native LD, GNU binutils (AS), GNU make, and GCC.
$ cd mpc-0.8.2
$ PATH=/opt/prebuilt/bin:$PATH ./configure --prefix=/opt/prebuilt
$ PATH=$HOME/tools4/bin:$HOME/tools/bin:$PATH ~/tools/bin/make
# PATH=$HOME/tools4/bin:$HOME/tools/bin:$PATH ~/tools/bin/make install
20. Build GCC 4.2.4 fullset (bootstrap) with patch (*3)
Use OpenServer's native LD, GNU binutils (AS), GNU make, and GCC.
After this step, it is ready to bootstrap pkgsrc with GCC 4.2.4.
$ mkdir 42build2
$ cd 42build2
$ PATH=$HOME/tools4/bin:$HOME/tools/bin:$PATH ../gcc-4.2.4/configure --prefix=/opt/prebuilt --with-gnu-as --disable-nls
$ PATH=$HOME/tools4/bin:$HOME/tools/bin:$PATH $HOME/tools/bin/make bootstrap
# PATH=$HOME/tools4/bin:$HOME/tools/bin:$PATH $HOME/tools/bin/make install
Patches
=======
There are in
http://ftp.netbsd.org/pub/NetBSD/misc/ryoon/SCO-OpenServer-5.0.7_3.2/ .
(*1) gcc-2.95.3-SCO-OpenServer5.0.7_3.2-C-fix.diff
(*2) gcc-2.95.3-SCO-OpenServer5.0.7_3.2-C++-fix.diff
(*3) gcc-4.2.4-SCO-OpenServer-5.0.7_3.2.diff
(*4) binutils-2.24-SCO-OpenServer-5.0.7_3.2.diff