kpriv/pkgsrc
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
pkgsrc/mk/bsd.pkg.mk
agc 12106c0620 use ${PKG_INFO} rather than pkg_info in show-installed-depends target, 
so that the correct setting of PKG_DBDIR is used, and the correct
pkg_info binary too, presumably.

Make show-installed-depends work on Solaris (untested) by only defining
the target if DEPENDS is defined.
2001-10-04 21:48:12 +00:00

3443 lines
112 KiB
Makefile
Raw Blame History

# $NetBSD: bsd.pkg.mk,v 1.821 2001/10/04 21:48:12 agc Exp $
#
# This file is in the public domain.
#
# This file is derived from bsd.port.mk - 940820 Jordan K. Hubbard.
#
# Please see the NetBSD packages(7) manual page for details on the
# that variables used in this make file template.
# Default sequence for "all" is: fetch checksum extract patch configure build
#
# Please read the comments in the targets section below, you
# should be able to use the pre-* or post-* targets/scripts
# (which are available for every stage except checksum) or
# override the do-* targets to do pretty much anything you want.
#
# NEVER override the "regular" targets unless you want to open
# a major can of worms.
##### Include any preferences, if not already included, and common definitions
.include "../../mk/bsd.prefs.mk"
##### Build crypto packages by default.
MKCRYPTO?= yes
##### Some overrides of defaults below on a per-OS basis.
.if (${OPSYS} == "SunOS")
DEF_UMASK?= 022
.elif (${OPSYS} == "Linux")
DEF_UMASK?= 022
NOMANCOMPRESS?= yes
.endif
DEF_UMASK?= 0022
CLEANDEPENDS?= NO
DEINSTALLDEPENDS?= NO # add -R to pkg_delete
REINSTALL?= NO # reinstall upon update
CHECK_SHLIBS?= YES # run check-shlibs after install
SHLIB_HANDLING?= YES # do automatic shared lib handling
NOCLEAN?= NO # don't clean up after update
PKGSRCDIR?= ${.CURDIR:C|/[^/]*/[^/]*$||}
PKGPATH?= ${.CURDIR:C|.*/([^/]*/[^/]*)$|\1|}
PKGBASE?= ${PKGNAME:C/-[^-]*$//}
PKGVERSION?= ${PKGNAME:C/^.*-//}
PKGWILDCARD?= ${PKGBASE}-[0-9]*
DISTDIR?= ${PKGSRCDIR}/distfiles
_DISTDIR?= ${DISTDIR}/${DIST_SUBDIR}
PACKAGES?= ${PKGSRCDIR}/packages
TEMPLATES?= ${PKGSRCDIR}/templates
PATCHDIR?= ${.CURDIR}/patches
SCRIPTDIR?= ${.CURDIR}/scripts
FILESDIR?= ${.CURDIR}/files
PKGDIR?= ${.CURDIR}/pkg
.if defined(USE_JAVA)
BUILD_DEFS+= PKG_JVM JAVA_HOME
. if !defined(PKG_JVM)
. if ${MACHINE_PLATFORM:MNetBSD-*-i386} != "" || \
${MACHINE_PLATFORM:MLinux-*-i386} != ""
PKG_JVM?= jdk
. elif ${MACHINE_PLATFORM:MNetBSD-*-powerpc} != ""
PKG_JVM?= blackdown-jdk13
. else
PKG_JVM?= kaffe
. endif
. endif
. if ${PKG_JVM} == "jdk"
DEPENDS+= jdk-*:../../lang/jdk
. if defined(JDK_HOME)
JAVA_HOME?= ${JDK_HOME}
. else
JAVA_HOME?= ${LOCALBASE}/java
. endif
. elif ${PKG_JVM} == "sun-jdk"
BUILD_DEPENDS+= sun-jdk-*:../../lang/sun-jdk13
DEPENDS+= sun-jre-*:../../lang/sun-jre13
JAVA_HOME?= ${LOCALBASE}/java
. elif ${PKG_JVM} == "blackdown-jdk13"
DEPENDS+= blackdown-jdk-*:../../lang/blackdown-jdk13
JAVA_HOME?= ${LOCALBASE}/java
. elif ${PKG_JVM} == "kaffe"
DEPENDS+= kaffe-[0-9]*:../../lang/kaffe
JAVA_HOME?= ${LOCALBASE}/kaffe
. endif
. if exists(${JAVA_HOME}/lib/classes.zip:)
CLASSPATH?= ${JAVA_HOME}/lib/classes.zip:.
MAKE_ENV+= CLASSPATH=${CLASSPATH}
CONFIGURE_ENV+= CLASSPATH=${CLASSPATH}
SCRIPTS_ENV+= CLASSPATH=${CLASSPATH}
. endif
PATH:= ${PATH}:${JAVA_HOME}/bin
MAKE_ENV+= JAVA_HOME=${JAVA_HOME}
CONFIGURE_ENV+= JAVA_HOME=${JAVA_HOME}
SCRIPTS_ENV+= JAVA_HOME=${JAVA_HOME}
.endif
# Set X11PREFIX to reflect the install directory of X11 packages.
# Set XMKMF_CMD properly if xpkgwedge is installed.
#
# The check for the existence of ${X11BASE}/lib/X11/config/xpkgwedge.def
# is to catch users of xpkgwedge<1.0.
#
XMKMF?= ${XMKMF_CMD} ${XMKMF_FLAGS} -a
XMKMF_FLAGS?= # empty
.if exists(${LOCALBASE}/lib/X11/config/xpkgwedge.def) || \
exists(${X11BASE}/lib/X11/config/xpkgwedge.def)
X11PREFIX= ${LOCALBASE}
XMKMF_CMD?= ${X11PREFIX}/bin/pkgxmkmf
.else
X11PREFIX= ${X11BASE}
XMKMF_CMD?= ${X11PREFIX}/bin/xmkmf
.endif
# Set the default BUILDLINK_X11_DIR to ${X11BASE} so that in the absence
# of x11.buildlink.mk, it still points to a working X11R6 hierarchy.
#
BUILDLINK_X11_DIR?= ${X11BASE}
.if defined(USE_IMAKE) || defined(USE_X11BASE)
. if exists(${LOCALBASE}/lib/X11/config/xpkgwedge.def) || \
exists(${X11BASE}/lib/X11/config/xpkgwedge.def)
BUILD_DEPENDS+= xpkgwedge>=1.5:../../pkgtools/xpkgwedge
. endif
PREFIX= ${X11PREFIX}
.elif defined(USE_CROSSBASE)
PREFIX= ${CROSSBASE}
NO_MTREE= yes
.else
PREFIX= ${LOCALBASE}
.endif
# We need to make sure the buildlink-x11 package is not installed since it
# currently breaks builds that use imake.
#
.if defined(USE_IMAKE)
. if exists(${LOCALBASE}/lib/X11/config/buildlinkX11.def) || \
exists(${X11BASE}/lib/X11/config/buildlinkX11.def)
IGNORE+= "${PKGNAME} uses imake, but the buildlink-x11 package was found." \
" Please deinstall it (pkg_delete buildlink-x11)."
. endif
.endif # USE_IMAKE
.if defined(USE_GMAKE)
BUILD_DEPENDS+= gmake>=3.78:../../devel/gmake
MAKE_PROGRAM= ${GMAKE}
GMAKE?= gmake
.else
. if (${OPSYS} == "SunOS") && defined(USE_IMAKE)
MAKE_PROGRAM= /usr/ccs/bin/make
. else
MAKE_PROGRAM= ${MAKE}
. endif
.endif
CONFIGURE_ENV+= MAKE="${MAKE_PROGRAM}"
.if defined(USE_KERBEROS)
RESTRICTED?= uses Kerberos encryption code
BUILD_DEFS+= KERBEROS
.endif
PERL5?= ${LOCALBASE}/bin/perl
PERL5_REQD?= 5.0
.if defined(USE_PERL5)
DEPENDS+= perl>=${PERL5_REQD}:../../lang/perl5
. if exists(${PERL5})
. if exists(${LOCALBASE}/share/mk/bsd.perl.mk)
. include "${LOCALBASE}/share/mk/bsd.perl.mk"
. elif !defined(PERL5_SITELIB) || !defined(PERL5_SITEARCH) || !defined(PERL5_ARCHLIB)
PERL5_SITELIB!= eval `${PERL5} -V:installsitelib 2>/dev/null`; \
${ECHO} $${installsitelib}
PERL5_SITEARCH!= eval `${PERL5} -V:installsitearch 2>/dev/null`; \
${ECHO} $${installsitearch}
PERL5_ARCHLIB!= eval `${PERL5} -V:installarchlib 2>/dev/null`; \
${ECHO} $${installarchlib}
MAKEFLAGS+= PERL5_SITELIB=${PERL5_SITELIB}
MAKEFLAGS+= PERL5_SITEARCH=${PERL5_SITEARCH}
MAKEFLAGS+= PERL5_ARCHLIB=${PERL5_ARCHLIB}
. endif # !exists(bsd.perl.mk) && !defined(PERL5_*)
. endif # exists($PERL5)
.endif # USE_PERL5
.if defined(USE_PYTHON)
PYTHON?= ${LOCALBASE}/bin/python
DEPENDS+= python>=1.6:../../lang/python
. if exists(${PYTHON})
BUILD_DEPENDS+= python-mk-*:../../pkgtools/python-mk
. if exists(${LOCALBASE}/share/mk/bsd.python.mk)
. include "${LOCALBASE}/share/mk/bsd.python.mk"
. endif
. endif
.endif
.if defined(USE_FORTRAN)
. if !exists(/usr/bin/f77)
PKG_FC?= f2c-f77
. endif
# it is anticipated that once /usr/bin/f77 is more stable that the following
# default will be changed to f77. However, in the case where there is no
# /usr/bin/f77, the default will remain as f2c-f77.
PKG_FC?= f2c-f77
. if (${PKG_FC} == "f2c-f77")
# this is a DEPENDS not BUILD_DEPENDS because of the
# shared Fortran libs
. if defined(USE_BUILDLINK_ONLY)
. include "../../lang/f2c/buildlink.mk"
. else
DEPENDS+= f2c>=20001205nb3:../../lang/f2c
. endif
. endif
FC= ${PKG_FC}
F77= ${PKG_FC}
CONFIGURE_ENV+= F77="${F77}"
CONFIGURE_ENV+= FFLAGS="${FFLAGS}"
MAKE_ENV+= F77="${F77}"
MAKE_ENV+= FC="${FC}"
.endif
.if defined(INFO_FILES)
USE_GTEXINFO= yes
.endif
.if ((defined(NEED_NCURSES)) && (${NEED_NCURSES} == YES))
DEPENDS+= ncurses>=5.0:../../devel/ncurses
.endif
.if defined(USE_GTEXINFO) && !exists(/usr/bin/install-info)
DEPENDS+= gtexinfo-3.12:../../devel/gtexinfo
.endif
# -lintl in CONFIGURE_ENV is to workaround broken gettext.m4
# (gettext.m4 does not add -lintl where it should, and fails to detect
# if libintl.a is genuine GNU gettext or not).
.if ${OPSYS} != "Linux"
. if defined(USE_LIBINTL)
. if exists(/usr/include/libintl.h)
. if defined(GNU_CONFIGURE)
LIBS+= -lintl
. endif
. else
DEPENDS+= gettext-lib>=0.10.35nb1:../../devel/gettext-lib
. if defined(GNU_CONFIGURE)
CPPFLAGS+= -I${LOCALBASE}/include
LIBS+= -L${LOCALBASE}/lib -lintl
. endif
. endif
. endif
.endif
# If GNU_CONFIGURE is defined, then pass LIBS to the GNU configure script.
.if defined(GNU_CONFIGURE)
CONFIGURE_ENV+= LIBS="${LIBS}"
.endif
LIBTOOL_REQD= 1.4.20010219nb6
.if defined(USE_LIBTOOL)
LIBTOOL= ${LOCALBASE}/bin/libtool
. if defined(USE_LTDL)
DEPENDS+= libtool>=${LIBTOOL_REQD}:../../devel/libtool
. else
BUILD_DEPENDS+= libtool-base>=${LIBTOOL_REQD}:../../devel/libtool-base
. endif
CONFIGURE_ENV+= LIBTOOL="${LIBTOOL} ${LIBTOOL_FLAGS}"
MAKE_ENV+= LIBTOOL="${LIBTOOL} ${LIBTOOL_FLAGS}"
.endif
.if defined(USE_SSL)
. if exists(/usr/include/openssl/ssl.h)
SSLBASE= /usr
SSLCERTS= /etc/openssl/certs
. else
DEPENDS+= openssl-0.9.[56]*:../../security/openssl
SSLBASE= ${LOCALBASE}
SSLCERTS= ${SSLBASE}/certs
. endif
BUILD_DEFS+= SSLBASE
.endif
.if defined(USE_XAW)
. if defined(XAW_TYPE)
. if ${XAW_TYPE} == "xpm"
DEPENDS+= Xaw-Xpm-1.1:../../x11/Xaw-Xpm
. elif ${XAW_TYPE} == "3d"
DEPENDS+= Xaw3d-1.5:../../x11/Xaw3d
. endif
. endif
.endif
.if defined(BUILD_USES_MSGFMT) && !exists(/usr/bin/msgfmt)
BUILD_DEPENDS+= gettext>=0.10.35nb1:../../devel/gettext
.endif
.if defined(BUILD_USES_GETTEXT_M4)
BUILD_DEPENDS+= {gettext-0.10.35nb1,gettext-m4-*}:../../devel/gettext-m4
.endif
# Don't change these!!! These names are built into the _TARGET_USE macro,
# there is no way to refer to them cleanly from within the macro AFAIK.
EXTRACT_COOKIE= ${WRKDIR}/.extract_done
CONFIGURE_COOKIE= ${WRKDIR}/.configure_done
INSTALL_COOKIE= ${WRKDIR}/.install_done
BUILD_COOKIE= ${WRKDIR}/.build_done
PATCH_COOKIE= ${WRKDIR}/.patch_done
PACKAGE_COOKIE= ${WRKDIR}/.package_done
# New message digest defs
DIGEST_ALGORITHM?= SHA1
# Miscellaneous overridable commands:
SHCOMMENT?= ${ECHO_MSG} >/dev/null '***'
DISTINFO_FILE?= ${.CURDIR}/distinfo
.if exists(/usr/bin/m4)
M4?= /usr/bin/m4
.endif
.if !defined(X11_BUILDLINK_MK)
. if defined(USE_X11BASE) || defined(USE_X11)
LDFLAGS+= -Wl,-R${X11BASE}/lib
LDFLAGS+= -L${X11BASE}/lib
. endif
.endif
LDFLAGS+= -Wl,-R${LOCALBASE}/lib
.if !defined(USE_BUILDLINK_ONLY)
LDFLAGS+= -L${LOCALBASE}/lib
.endif
MAKE_ENV+= LDFLAGS="${LDFLAGS}"
CONFIGURE_ENV+= LDFLAGS="${LDFLAGS}" M4="${M4}" YACC="${YACC}"
MAKE_FLAGS?=
MAKEFILE?= Makefile
MAKE_ENV+= PATH=${PATH}:${LOCALBASE}/bin:${X11BASE}/bin PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} CFLAGS="${CFLAGS}" CPPFLAGS="${CPPFLAGS}"
.if exists(${ZOULARISBASE}/bin/ftp) # Zoularis
FETCH_CMD?= ${ZOULARISBASE}/bin/ftp
.else
FETCH_CMD?= /usr/bin/ftp
.endif
TOUCH_FLAGS?= -f
PATCH_STRIP?= -p0
PATCH_DIST_STRIP?= -p0
.if defined(PATCH_DEBUG) || defined(PKG_VERBOSE)
PATCH_DEBUG_TMP= yes
PATCH_ARGS?= -d ${WRKSRC} -E ${PATCH_STRIP}
PATCH_DIST_ARGS?= -d ${WRKSRC} -E ${PATCH_DIST_STRIP}
.else
PATCH_DEBUG_TMP= no
PATCH_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_STRIP}
PATCH_DIST_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP}
.endif
.if defined(BATCH)
PATCH_ARGS+= --batch
PATCH_DIST_ARGS+= --batch
.endif
.if (${OPSYS} == "SunOS" || ${OPSYS} == "Linux")
PATCH_ARGS+= -V simple -z .orig
.else
PATCH_ARGS+= -V simple -b .orig
.endif
PATCH_FUZZ_FACTOR?= -F0 # Default to zero fuzz
# If the distfile has a tar.bz2 suffix, use bzcat in preference to gzcat,
# pulling in the "bzip2" package if necessary. [Note: this is only for
# the benefit of pre 1.5 NetBSD systems. "gzcat" on newer systems happily
# decodes bzip2.] Do likewise for ".zip" and ".lha" distfiles.
EXTRACT_SUFX?= .tar.gz
.if ${EXTRACT_SUFX} == ".tar.bz2"
. if exists(/usr/bin/bzcat)
BZCAT= /usr/bin/bzcat <
. else
BZCAT= ${LOCALBASE}/bin/bzcat
BUILD_DEPENDS+= bzip2>=0.9.0b:../../archivers/bzip2
. endif # !exists bzcat
DECOMPRESS_CMD?= ${BZCAT}
.elif ${EXTRACT_SUFX} == ".tar"
DECOMPRESS_CMD?= ${CAT}
.elif ${EXTRACT_SUFX} == ".zip"
BUILD_DEPENDS+= unzip-*:../../archivers/unzip
EXTRACT_CMD?= unzip -Laq ${DOWNLOADED_DISTFILE}
.elif ${EXTRACT_SUFX} == ".lzh" || ${EXTRACT_SUFX} == ".lha"
BUILD_DEPENDS+= lha-114f:../../archivers/lha
EXTRACT_CMD?= lha xq ${DOWNLOADED_DISTFILE}
.else
DECOMPRESS_CMD?= ${GZCAT}
.endif
# Also need bzip2 for PATCHFILES with .bz2 suffix.
.if defined(PATCHFILES)
. if ${PATCHFILES:E} == "bz2" && ${EXTRACT_SUFX} != ".tar.bz2"
. if exists(/usr/bin/bzcat)
BZCAT= /usr/bin/bzcat
. else
BZCAT= ${LOCALBASE}/bin/bzcat
BUILD_DEPENDS+= bzip2>=0.9.0b:../../archivers/bzip2
. endif # !exists bzcat
. endif
.endif # defined(PATCHFILES)
# If this is empty, then everything gets extracted.
EXTRACT_ELEMENTS?=
# If EXTRACT_USING_PAX is defined, use pax in preference to (GNU) tar,
# and append 2 tar blocks of zero bytes on the end, in case the archive
# was written with a buggy version of GNU tar.
.if defined(EXTRACT_USING_PAX)
EXTRACT_CMD?= { ${DECOMPRESS_CMD} ${DOWNLOADED_DISTFILE} ; dd if=/dev/zero bs=10k count=2; } | ${PAX} -r ${EXTRACT_ELEMENTS}
.else
EXTRACT_CMD?= ${DECOMPRESS_CMD} ${DOWNLOADED_DISTFILE} | ${GTAR} -xf - ${EXTRACT_ELEMENTS}
.endif
# Figure out where the local mtree file is
.if !defined(MTREE_FILE)
. if defined(USE_IMAKE) || defined(USE_X11BASE)
MTREE_FILE= ${PKGSRCDIR}/mk/${OPSYS}.x11.dist
. else
MTREE_FILE= ${PKGSRCDIR}/mk/${OPSYS}.pkg.dist
. endif
.endif # ! MTREE_FILE
MTREE_ARGS?= -U -f ${MTREE_FILE} -d -e -p
# Debugging levels for this file, dependent on PKG_DEBUG_LEVEL definition
# 0 == normal, default, quiet operation
# 1 == all shell commands echoed before invocation
# 2 == shell "set -x" operation
PKG_DEBUG_LEVEL?= 0
_PKG_SILENT= @
_PKG_DEBUG=
.if ${PKG_DEBUG_LEVEL} > 0
_PKG_SILENT=
.endif
.if ${PKG_DEBUG_LEVEL} > 1
_PKG_DEBUG= set -x;
.endif
# If WRKOBJDIR is set, use that tree to build
.ifdef WRKOBJDIR
BUILD_ROOT= ${WRKOBJDIR}
BUILD_DIR?= ${WRKOBJDIR}/${PKGPATH}
.else
BUILD_ROOT= ${PKGSRCDIR}
BUILD_DIR?= ${.CURDIR}
.endif # WRKOBJDIR
# If OBJMACHINE is set, use ${MACHINE_ARCH} in the working directory name
.ifdef OBJMACHINE
WRKDIR_BASENAME?= work.${MACHINE_ARCH}
.else
WRKDIR_BASENAME?= work
.endif
WRKDIR?= ${BUILD_DIR}/${WRKDIR_BASENAME}
WRKSRC?= ${WRKDIR}/${DISTNAME}
.if defined(NO_WRKSUBDIR)
.BEGIN:
@${ECHO_MSG} 'NO_WRKSUBDIR has been deprecated - please replace it with an explicit'
@${ECHO_MSG} 'assignment of WRKSRC= $${WRKDIR}'
@${FALSE}
.endif # NO_WRKSUBDIR
# A few aliases for *-install targets
INSTALL_PROGRAM?= \
${INSTALL} ${COPY} ${STRIPFLAG} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_SCRIPT?= \
${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_DATA?= \
${INSTALL} ${COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE}
INSTALL_MAN?= \
${INSTALL} ${COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE}
INSTALL_PROGRAM_DIR?= \
${INSTALL} -d -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_SCRIPT_DIR?= \
${INSTALL_PROGRAM_DIR}
INSTALL_DATA_DIR?= \
${INSTALL} -d -o ${SHAREOWN} -g ${SHAREGRP} -m ${BINMODE}
INSTALL_MAN_DIR?= \
${INSTALL} -d -o ${MANOWN} -g ${MANGRP} -m ${BINMODE}
INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
BSD_INSTALL_DATA="${INSTALL_DATA}" \
BSD_INSTALL_MAN="${INSTALL_MAN}" \
BSD_INSTALL_PROGRAM_DIR="${INSTALL_PROGRAM_DIR}" \
BSD_INSTALL_SCRIPT_DIR="${INSTALL_SCRIPT_DIR}" \
BSD_INSTALL_DATA_DIR="${INSTALL_DATA_DIR}" \
BSD_INSTALL_MAN_DIR="${INSTALL_MAN_DIR}"
MAKE_ENV+= ${INSTALL_MACROS}
SCRIPTS_ENV+= ${INSTALL_MACROS}
# The user can override the NO_PACKAGE by specifying this from
# the make command line
.if defined(FORCE_PACKAGE)
. undef NO_PACKAGE
.endif
.if !defined(COMMENT)
COMMENT!= (${CAT} ${PKGDIR}/COMMENT || ${ECHO} -n "(no description)") 2>/dev/null
.endif
DESCR= ${WRKDIR}/.DESCR
DESCR_SRC?= ${PKGDIR}/DESCR
PLIST= ${WRKDIR}/.PLIST
PLIST_SRC?= ${PKGDIR}/PLIST
DLIST= ${WRKDIR}/.DLIST
DDIR= ${WRKDIR}/.DDIR
# Set PLIST_SUBST to substitute "${variable}" to "value" in PLIST
PLIST_SUBST+= OPSYS=${OPSYS} \
OS_VERSION=${OS_VERSION} \
MACHINE_ARCH=${MACHINE_ARCH} \
MACHINE_GNU_ARCH=${MACHINE_GNU_ARCH} \
MACHINE_GNU_PLATFORM=${MACHINE_GNU_PLATFORM} \
LOWER_VENDOR=${LOWER_VENDOR} \
LOWER_OPSYS=${LOWER_OPSYS} \
PKGNAME=${PKGNAME} \
PKGLOCALEDIR=${PKGLOCALEDIR} \
PKGVERSION=${PKGVERSION:C/nb[0-9]*$//} \
SVR4_PKGNAME=${SVR4_PKGNAME}
.if defined(PERL5_SITELIB)
PLIST_SUBST+= PERL5_SITELIB=${PERL5_SITELIB:S/^${LOCALBASE}\///}
.endif
.if defined(PERL5_SITEARCH)
PLIST_SUBST+= PERL5_SITEARCH=${PERL5_SITEARCH:S/^${LOCALBASE}\///}
.endif
.if defined(PERL5_ARCHLIB)
PLIST_SUBST+= PERL5_ARCHLIB=${PERL5_ARCHLIB:S/^${LOCALBASE}\///}
.endif
# Set INSTALL_FILE to be the name of any INSTALL file
.if !defined(INSTALL_FILE) && exists(${PKGDIR}/INSTALL)
INSTALL_FILE= ${PKGDIR}/INSTALL
.endif
# Set DEINSTALL_FILE to be the name of any DEINSTALL file
.if !defined(DEINSTALL_FILE) && exists(${PKGDIR}/DEINSTALL)
DEINSTALL_FILE= ${PKGDIR}/DEINSTALL
.endif
# Set MESSAGE_SRC to be the name of any MESSAGE file, if ${MESSAGE}
# hasn't be defined
.if !defined(MESSAGE_SRC) && !defined(MESSAGE) && exists(${PKGDIR}/MESSAGE)
MESSAGE_SRC= ${PKGDIR}/MESSAGE
.endif
.if defined(MESSAGE_SRC)
MESSAGE= ${WRKDIR}/.MESSAGE
# Set MESSAGE_SUBST to substitute "${variable}" to "value" in MESSAGE
MESSAGE_SUBST+= PKGNAME=${PKGNAME} \
PREFIX=${PREFIX} \
LOCALBASE=${LOCALBASE} \
X11PREFIX=${X11PREFIX} \
X11BASE=${X11BASE}
.endif
PKG_ADD?= PKG_DBDIR=${PKG_DBDIR} ${PKG_TOOLS_BIN}/pkg_add
PKG_ADMIN?= PKG_DBDIR=${PKG_DBDIR} ${PKG_TOOLS_BIN}/pkg_admin
PKG_CREATE?= PKG_DBDIR=${PKG_DBDIR} ${PKG_TOOLS_BIN}/pkg_create
PKG_DELETE?= PKG_DBDIR=${PKG_DBDIR} ${PKG_TOOLS_BIN}/pkg_delete
PKG_INFO?= PKG_DBDIR=${PKG_DBDIR} ${PKG_TOOLS_BIN}/pkg_info
# Latest version of digest(1) required for pkgsrc
DIGEST_REQD= 20010302
uptodate-digest:
${_PKG_SILENT}${_PKG_DEBUG} \
if [ ! -f ${DIGEST} -o ${DIGEST_VERSION} -lt ${DIGEST_REQD} ]; then \
case ${PKGNAME} in \
digest-*) \
;; \
*) \
{ cd ${PKGSRCDIR}/pkgtools/digest; \
${MAKE} clean; \
if [ -f ${DIGEST} ]; then \
${MAKE} ${MAKEFLAGS} deinstall; \
fi; \
${MAKE} ${MAKEFLAGS} ${DEPENDS_TARGET}; \
${MAKE} ${MAKEFLAGS} clean; } \
;; \
esac \
fi
# Latest version of pkgtools required for this file.
PKGTOOLS_REQD= 20010306
# Check that we are using up-to-date pkg_* tools with this file.
.if defined(ZOULARIS_VERSION)
uptodate-pkgtools: uptodate-zoularis
.else
uptodate-pkgtools:
.endif
${_PKG_SILENT}${_PKG_DEBUG} \
if [ ${PKGTOOLS_VERSION} -lt ${PKGTOOLS_REQD} ]; then \
case ${PKGNAME} in \
digest-*|pkg_install-*) \
;; \
*) \
${ECHO} "Your package tools need to be updated to ${PKGTOOLS_REQD:C|(....)(..)(..)|\1/\2/\3|} versions."; \
${ECHO} "The installed package tools were last updated on ${PKGTOOLS_VERSION:C|(....)(..)(..)|\1/\2/\3|}."; \
${ECHO} "Please \"make install\" in ../../pkgtools/pkg_install."; \
${FALSE} ;; \
esac \
fi
# Latest version of Zoularis required for this file.
ZOULARIS_REQD= 20010323
# Check that we are using up-to-date Zoularis.
.if defined(ZOULARIS_VERSION)
uptodate-zoularis:
${_PKG_SILENT}${_PKG_DEBUG} \
if [ ${ZOULARIS_VERSION} -lt ${ZOULARIS_REQD} ]; then \
${ECHO} "Your Zoularis needs to be updated to the ${ZOULARIS_REQD:C|(....)(..)(..)|\1/\2/\3|} version."; \
${ECHO} "The installed Zoularis was last updated on ${ZOULARIS_VERSION:C|(....)(..)(..)|\1/\2/\3|}."; \
${FALSE}; \
fi
.endif
# Files to create for versioning and build information
BUILD_VERSION_FILE= ${WRKDIR}/.build_version
BUILD_INFO_FILE= ${WRKDIR}/.build_info
# Files containing size of pkg w/o and w/ all required pkgs
SIZE_PKG_FILE= ${WRKDIR}/.SizePkg
SIZE_ALL_FILE= ${WRKDIR}/.SizeAll
.ifndef PKG_ARGS_COMMON
PKG_ARGS_COMMON= -v -c -${COMMENT:Q}" " -d ${DESCR} -f ${PLIST}
PKG_ARGS_COMMON+= -l -b ${BUILD_VERSION_FILE} -B ${BUILD_INFO_FILE}
PKG_ARGS_COMMON+= -s ${SIZE_PKG_FILE} -S ${SIZE_ALL_FILE}
PKG_ARGS_COMMON+= -P "`${MAKE} ${MAKEFLAGS} run-depends-list PACKAGE_DEPENDS_QUICK=true | ${SORT} -u`"
. ifdef CONFLICTS
PKG_ARGS_COMMON+= -C "${CONFLICTS}"
. endif
. ifdef INSTALL_FILE
PKG_ARGS_COMMON+= -i ${INSTALL_FILE}
. endif
. ifdef DEINSTALL_FILE
PKG_ARGS_COMMON+= -k ${DEINSTALL_FILE}
. endif
. ifdef MESSAGE
PKG_ARGS_COMMON+= -D ${MESSAGE}
. endif
. ifndef NO_MTREE
PKG_ARGS_COMMON+= -m ${MTREE_FILE}
. endif
PKG_ARGS_INSTALL= -p ${PREFIX} ${PKG_ARGS_COMMON}
PKG_ARGS_BINPKG= -p ${PREFIX:S/^${DESTDIR}//} -L ${PREFIX} ${PKG_ARGS_COMMON}
.endif # !PKG_ARGS_COMMON
PKG_SUFX?= .tgz
#PKG_SUFX?= .tbz # bzip2(1) pkgs
# where pkg_add records its dirty deeds.
PKG_DBDIR?= ${DESTDIR}/var/db/pkg
# Define SMART_MESSAGES in /etc/mk.conf for messages giving the tree
# of dependencies for building, and the current target.
.ifdef SMART_MESSAGES
_PKGSRC_IN?= ===> ${.TARGET} [${PKGNAME}${_PKGSRC_DEPS}] ===
.else
_PKGSRC_IN?= ===
.endif
# Used to print all the '===>' style prompts - override this to turn them off.
ECHO_MSG?= ${ECHO}
# How to do nothing. Override if you, for some strange reason, would rather
# do something.
DO_NADA?= ${TRUE}
ALL_TARGET?= all
INSTALL_TARGET?= install
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
INSTALL_TARGET+= install.man
.endif
# If this host is behind a filtering firewall, use passive ftp(1)
.if defined(PASSIVE_FETCH)
FETCH_BEFORE_ARGS += -p
.endif
# If USE_MOTIF (deprecated) is set, then include motif.buildlink.mk for the
# Motif discovery logic.
#
.if defined(USE_MOTIF)
. include "../../mk/motif.buildlink.mk"
.endif
# If USE_XPM is set, depend on xpm.
.if defined(USE_XPM)
. if (defined(HAVE_BUILTIN_XPM) && (${HAVE_BUILTIN_XPM} == "NO"))
DEPENDS+= xpm-3.4k:../../graphics/xpm
XPMDIR_DEFAULT= ${X11PREFIX}
. else
XPMDIR_DEFAULT= ${X11BASE}
. endif
. undef __BUILTIN_XPM
.endif # USE_XPM
# If USE_MESA is set, depend on Mesa (or Mesa-glx if USE_GLX is defined and
# Mesa/GLX is not included in XFree86)
.if defined(USE_MESA)
. if (defined(USE_GLX) && defined(HAVE_BUILTIN_MESA) && ${HAVE_BUILTIN_MESA} == "NO")
DEPENDS+= Mesa-glx>=20000813:../../graphics/Mesa-glx
. else
DEPENDS+= Mesa>=3.2.1:../../graphics/Mesa
. endif
. undef __BUILTIN_MESA
.endif # USE_MESA
# If USE_FREETYPE2 is set, depend on freetype2.
.if defined(USE_FREETYPE2)
. if ${HAVE_BUILTIN_FREETYPE2} == "NO"
DEPENDS+= freetype2>=2.0.1:../../graphics/freetype2
. endif
. undef __BUILTIN_FREETYPE2
.endif # USE_FREETYPE2
# Check if we got "rman" with XFree86, for packages that need "rman".
.if defined(USE_RMAN)
. if !exists(${X11BASE}/bin/rman)
DEPENDS+= rman-3.0.9:../../textproc/rman
RMAN?= ${LOCALBASE}/bin/rman
. else
RMAN?= ${X11BASE}/bin/rman
. endif
.endif
# Popular master sites
MASTER_SITE_XCONTRIB+= \
ftp://uiarchive.uiuc.edu/pub/ftp/ftp.x.org/contrib/ \
ftp://sunsite.doc.ic.ac.uk/packages/X11/contrib/ \
ftp://ftp.gwdg.de/pub/x11/x.org/contrib/ \
ftp://ftp.sunet.se/pub/X11/contrib/ \
ftp://sunsite.sut.ac.jp/pub/archives/X11/contrib/ \
ftp://sunsite.icm.edu.pl/pub/X11/contrib/ \
ftp://ftp.task.gda.pl/mirror/ftp.x.org/contrib/ \
ftp://ftp.ntua.gr/pub/X11/contrib/ \
ftp://sunsite.cnlab-switch.ch/mirror/X11/contrib/ \
ftp://ftp.cica.es/pub/X/contrib/ \
ftp://ftp.unicamp.br/pub/X11/contrib/ \
ftp://ftp.uni-paderborn.de/pub/X11/contrib/ \
ftp://ftp.x.org/contrib/
MASTER_SITE_GNU+= \
ftp://ftp.gnu.org/pub/gnu/ \
ftp://ftp.cs.columbia.edu/archives/gnu/prep/ \
ftp://ftp.gwdg.de/pub/gnu/ \
ftp://ftp.progsoc.uts.edu.au/pub/gnu/
MASTER_SITE_PERL_CPAN+= \
ftp://ftp.loaded.net/pub/CPAN/modules/by-module/ \
ftp://ftp.freesoftware.com/pub/perl/CPAN/modules/by-module/ \
ftp://ftp.gmd.de/mirrors/CPAN/modules/by-module/ \
ftp://cpan.perl.org/CPAN/modules/by-module/
MASTER_SITE_R_CRAN+= \
http://cran.r-project.org/src/ \
ftp://cran.r-project.org/pub/R/src/ \
http://cran.at.r-project.org/src/ \
ftp://cran.at.r-project.org/pub/R/src/ \
http://cran.dk.r-project.org/src/ \
http://cran.ch.r-project.org/src/ \
http://cran.uk.r-project.org/src/ \
http://cran.us.r-project.org/src/ \
http://lib.stat.cmu.edu/R/CRAN/src/ \
ftp://ftp.biostat.washington.edu/mirrors/R/CRAN/src/ \
http://cran.stat.wisc.edu/src/ \
http://SunSITE.auc.dk/R/src/ \
http://www.stat.unipg.it/pub/stat/statlib/R/CRAN/src/ \
ftp://ftp.u-aizu.ac.jp/pub/lang/R/CRAN/src/ \
ftp://dola.snu.ac.kr/pub/R/CRAN/src/ \
http://stat.ethz.ch/CRAN/src/ \
http://www.stats.bris.ac.uk/R/src/
MASTER_SITE_TEX_CTAN+= \
ftp://ftp.cdrom.com/pub/tex/ctan/ \
ftp://ftp.wustl.edu/packages/TeX/ \
ftp://ftp.funet.fi/pub/TeX/CTAN/ \
ftp://ftp.tex.ac.uk/public/ctan/tex-archive/ \
ftp://ftp.dante.de/tex-archive/
MASTER_SITE_SUNSITE+= \
ftp://sunsite.unc.edu/pub/Linux/ \
ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/ \
ftp://ftp.informatik.rwth-aachen.de/pub/comp/Linux/sunsite.unc.edu/
MASTER_SITE_GNOME+= \
ftp://ftp.gnome.org/pub/GNOME/ \
ftp://ftp.sunet.se/pub/X11/GNOME/ \
ftp://ftp.tuwien.ac.at/hci/gnome.org/GNOME/ \
ftp://ftp.fh-rosenheim.de/pub/mirror/ftp.gnome.org/GNOME/
MASTER_SITE_SOURCEFORGE+= \
http://prdownloads.sourceforge.net/ \
ftp://ftp3.sourceforge.net/pub/sourceforge/ \
http://ftp2.sourceforge.net/ \
http://ftp1.sourceforge.net/ \
ftp://ftp.tuwien.ac.at/opsys/linux/sourceforge/
# Empty declaration to avoid "variable MASTER_SITES recursive" error
MASTER_SITES?=
PATCH_SITES?=
# The primary backup site.
MASTER_SITE_BACKUP?= \
ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/ \
ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/
.if defined(DIST_SUBDIR)
_MASTER_SITE_BACKUP:= ${MASTER_SITE_BACKUP:=${DIST_SUBDIR}/}
. if defined(MASTER_SITE_OVERRIDE)
_MASTER_SITE_OVERRIDE:= ${MASTER_SITE_OVERRIDE:=${DIST_SUBDIR}/}
. endif # MASTER_SITE_OVERRIDE
.else # !DIST_SUBDIR
_MASTER_SITE_BACKUP:= ${MASTER_SITE_BACKUP}
. if defined(MASTER_SITE_OVERRIDE)
_MASTER_SITE_OVERRIDE:= ${MASTER_SITE_OVERRIDE}
. endif # MASTER_SITE_OVERRIDE
.endif # DIST_SUBDIR
# Where to put distfiles that don't have any other master site
MASTER_SITE_LOCAL?= \
${MASTER_SITE_BACKUP:=LOCAL_PORTS/}
# I guess we're in the master distribution business! :) As we gain mirror
# sites for distfiles, add them to this list.
.if !defined(MASTER_SITE_OVERRIDE)
MASTER_SITES+= ${_MASTER_SITE_BACKUP}
PATCH_SITES+= ${_MASTER_SITE_BACKUP}
.else
MASTER_SITES:= ${_MASTER_SITE_OVERRIDE} ${MASTER_SITES}
PATCH_SITES:= ${_MASTER_SITE_OVERRIDE} ${PATCH_SITES}
.endif
# Derived names so that they're easily overridable.
DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
PKGNAME?= ${DISTNAME}
SVR4_PKGNAME?= ${PKGNAME}
MAINTAINER?= packages@netbsd.org
ALLFILES?= ${DISTFILES} ${PATCHFILES}
CKSUMFILES?= ${ALLFILES}
.for __tmp__ in ${IGNOREFILES}
CKSUMFILES:= ${CKSUMFILES:N${__tmp__}}
.endfor
# List of all files, with ${DIST_SUBDIR} in front. Used for fetch and checksum.
.if defined(DIST_SUBDIR)
. if ${CKSUMFILES} != ""
_CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
. endif
_DISTFILES?= ${DISTFILES:S/^/${DIST_SUBDIR}\//}
_IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
_PATCHFILES?= ${PATCHFILES:S/^/${DIST_SUBDIR}\//}
.else
_CKSUMFILES?= ${CKSUMFILES}
_DISTFILES?= ${DISTFILES}
_IGNOREFILES?= ${IGNOREFILES}
_PATCHFILES?= ${PATCHFILES}
.endif
# This is what is actually going to be extracted, and is overridable
# by user.
EXTRACT_ONLY?= ${DISTFILES}
.if !defined(CATEGORIES) || !defined(DISTNAME)
.BEGIN:
@${ECHO_MSG} "CATEGORIES and DISTNAME are mandatory."
@${FALSE}
.endif
.if defined(LIB_DEPENDS)
.BEGIN:
@${ECHO_MSG} "LIB_DEPENDS is deprecated and must be replaced with DEPENDS."
@${FALSE}
.endif
.if defined(PKG_PATH)
.BEGIN:
@${ECHO_MSG} "Please unset PKG_PATH before doing pkgsrc works!"
@${FALSE}
.endif
.if defined(MASTER_SITE_SUBDIR)
.BEGIN:
@${ECHO_MSG} 'MASTER_SITE_SUBDIR is deprecated and must be replaced with MASTER_SITES.'
@${FALSE}
.endif
.if defined(PATCH_SITE_SUBDIR)
.BEGIN:
@${ECHO_MSG} 'PATCH_SITE_SUBDIR is deprecated and must be replaced with PATCH_SITES.'
@${FALSE}
.endif
.if defined(ONLY_FOR_ARCHS) || defined(NOT_FOR_ARCHS) \
|| defined(ONLY_FOR_OPSYS) || defined(NOT_FOR_OPSYS)
.BEGIN:
@${ECHO_MSG} 'ONLY/NOT_FOR_ARCHS/OPSYS are deprecated and must be replaced with ONLY/NOT_FOR_PLATFORM.'
@${FALSE}
.endif
PKGREPOSITORYSUBDIR?= All
PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR}
PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX}
CONFIGURE_SCRIPT?= ./configure
CONFIGURE_ENV+= PATH=${PATH}:${LOCALBASE}/bin:${X11BASE}/bin
.if defined(GNU_CONFIGURE)
CONFIGURE_ARGS+= --host=${MACHINE_GNU_PLATFORM} --prefix=${PREFIX}
HAS_CONFIGURE= yes
. if ${X11PREFIX} == ${LOCALBASE}
. if !defined(X11_BUILDLINK_MK)
CONFIGURE_ARGS+= --x-libraries=${X11BASE}/lib --x-includes=${X11BASE}/include
. endif
. endif
.endif
# Passed to most of script invocations
SCRIPTS_ENV+= CURDIR=${.CURDIR} DISTDIR=${DISTDIR} \
PATH=${PATH}:${LOCALBASE}/bin:${X11BASE}/bin \
WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \
SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \
PKGSRCDIR=${PKGSRCDIR} DEPENDS="${DEPENDS}" \
PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}
.if defined(BATCH)
SCRIPTS_ENV+= BATCH=yes
.endif
.MAIN: all
# Use aliases, so that all versions of English are acceptable
.if defined(LICENCE) && !defined(LICENSE)
LICENSE= ${LICENCE}
.endif
.if defined(ACCEPTABLE_LICENCES) && !defined(ACCEPTABLE_LICENSES)
ACCEPTABLE_LICENSES= ${ACCEPTABLE_LICENCES}
.endif
################################################################
# Many ways to disable a package.
#
# If we're in BATCH mode and the package is interactive, or we're
# in interactive mode and the package is non-interactive, skip
# all the important targets. The reason we have two modes is that
# one might want to leave a build in BATCH mode running overnight,
# then come back in the morning and do _only_ the interactive ones
# that required your intervention.
#
# Ignore packages that can't be resold if building for a CDROM.
#
# Don't build a package if it's restricted and we don't want to
# get into that.
#
# Don't build any package that utilizes strong cryptography, for
# when the law of the land forbids it.
#
# Don't attempt to build packages against X if we don't have X.
#
# Don't build a package if it's broken.
################################################################
.if !defined(NO_IGNORE)
. if (defined(IS_INTERACTIVE) && defined(BATCH))
IGNORE+= "${PKGNAME} is an interactive package"
. endif
. if (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
IGNORE+= "${PKGNAME} is not an interactive package"
. endif
. if (defined(NO_BIN_ON_CDROM) && defined(FOR_CDROM))
IGNORE+= "${PKGNAME} may not be placed in binary form on a CDROM:" \
" "${NO_BIN_ON_CDROM:Q}
. endif
. if (defined(NO_SRC_ON_CDROM) && defined(FOR_CDROM))
IGNORE+= "${PKGNAME} may not be placed in source form on a CDROM:" \
" "${NO_SRC_ON_CDROM:Q}
. endif
. if (defined(RESTRICTED) && defined(NO_RESTRICTED))
IGNORE+= "${PKGNAME} is restricted:" \
" "${RESTRICTED:Q}
. endif
. if !(${MKCRYPTO} == "YES" || ${MKCRYPTO} == yes)
. if (defined(CRYPTO) || defined(USE_SSL))
IGNORE+= "${PKGNAME} may not be built, because it utilizes strong cryptography"
. endif
. endif
. if ((defined(USE_IMAKE) || defined(USE_X11BASE) || defined(USE_X11)) && \
!exists(${X11BASE}))
IGNORE+= "${PKGNAME} uses X11, but ${X11BASE} not found"
. endif
. if defined(BROKEN)
IGNORE+= "${PKGNAME} is marked as broken:" ${BROKEN:Q}
. endif
. if defined(LICENSE)
. ifdef ACCEPTABLE_LICENSES
. for _lic in ${ACCEPTABLE_LICENSES}
. if ${LICENSE} == "${_lic}"
_ACCEPTABLE= yes
. endif # LICENSE == _lic
. endfor # _lic
. endif # ACCEPTABLE_LICENSES
. ifndef _ACCEPTABLE
IGNORE+= "${PKGNAME} has an unacceptable license: ${LICENSE}." \
" To build this package, add this line to your /etc/mk.conf:" \
" ACCEPTABLE_LICENSES+=${LICENSE}"
. endif # _ACCEPTABLE
. endif # LICENSE
# Define __PLATFORM_OK only if the OS matches the pkg's allowed list.
. if defined(ONLY_FOR_PLATFORM) && !empty(ONLY_FOR_PLATFORM)
. for __tmp__ in ${ONLY_FOR_PLATFORM}
. if ${MACHINE_PLATFORM:M${__tmp__}} != ""
__PLATFORM_OK?= yes
. endif # MACHINE_PLATFORM
. endfor # __tmp__
. else # !ONLY_FOR_PLATFORM
__PLATFORM_OK?= yes
. endif # ONLY_FOR_PLATFORM
. for __tmp__ in ${NOT_FOR_PLATFORM}
. if ${MACHINE_PLATFORM:M${__tmp__}} != ""
. undef __PLATFORM_OK
. endif # MACHINE_PLATFORM
. endfor # __tmp__
. if !defined(__PLATFORM_OK)
IGNORE+= "${PKGNAME} is not available for ${MACHINE_PLATFORM}"
. endif # !__PLATFORM_OK
#
# Now print some error messages that we know we should ignore the pkg
#
. if defined(IGNORE)
fetch checksum extract patch configure all build install package \
install-depends check-depends:
. if defined(IGNORE_SILENT)
@${DO_NADA}
. else
@for str in ${IGNORE} ; \
do \
${ECHO} "${_PKGSRC_IN}> $$str" ; \
done
. endif
. if defined(IGNORE_FAIL)
${FALSE}
. endif
. endif # IGNORE
.endif # !NO_IGNORE
# Add these defs to the ones dumped into +BUILD_DEFS
BUILD_DEFS+= PKGPATH
BUILD_DEFS+= OPSYS OS_VERSION MACHINE_ARCH MACHINE_GNU_ARCH
BUILD_DEFS+= CPPFLAGS CFLAGS LDFLAGS
BUILD_DEFS+= CONFIGURE_ENV CONFIGURE_ARGS
BUILD_DEFS+= OBJECT_FMT LICENSE RESTRICTED
BUILD_DEFS+= NO_SRC_ON_FTP NO_SRC_ON_CDROM
BUILD_DEFS+= NO_BIN_ON_FTP NO_BIN_ON_CDROM
.if defined(OSVERSION_SPECIFIC)
BUILD_DEFS+= OSVERSION_SPECIFIC
.endif # OSVERSION_SPECIFIC
.if !target(all)
all: build
.endif
.if !defined(DEPENDS_TARGET)
. if make(package)
DEPENDS_TARGET= package
. elif make(update)
DEPENDS_TARGET= update
. else
DEPENDS_TARGET= reinstall
. endif
.endif
.if !defined(UPDATE_TARGET)
. if ${DEPENDS_TARGET} == "update"
. if make(package)
UPDATE_TARGET= package
. else
UPDATE_TARGET= install
. endif
. else
UPDATE_TARGET= ${DEPENDS_TARGET}
. endif
.endif
################################################################
# The following are used to create easy dummy targets for
# disabling some bit of default target behavior you don't want.
# They still check to see if the target exists, and if so don't
# do anything, since you might want to set this globally for a
# group of packages in a Makefile.inc, but still be able to
# override from an individual Makefile.
################################################################
# Disable checksum
.if (defined(NO_CHECKSUM) && !target(checksum)) || exists(${EXTRACT_COOKIE})
checksum: fetch
@${DO_NADA}
.endif
# Disable patch
.if defined(NO_PATCH) && !target(patch)
patch: extract
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
.endif
# Disable configure
.if defined(NO_CONFIGURE) && !target(configure)
configure: patch
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
.endif
# Disable build
.if defined(NO_BUILD) && !target(build)
build: configure
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
.endif
# Disable install
.if defined(NO_INSTALL) && !target(install)
install: build
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.endif
# Disable package
.if defined(NO_PACKAGE) && !target(package)
package:
. if defined(IGNORE_SILENT)
@${DO_NADA}
. else
@${ECHO_MSG} "${_PKGSRC_IN}> ${PKGNAME} may not be packaged: ${NO_PACKAGE}."
. endif
.endif
################################################################
# More standard targets start here.
#
# These are the body of the build/install framework. If you are
# not happy with the default actions, and you can't solve it by
# adding pre-* or post-* targets/scripts, override these.
################################################################
# Fetch
_FETCH_FILE= \
if [ ! -f $$file -a ! -f $$bfile -a ! -h $$bfile ]; then \
${ECHO_MSG} "=> $$bfile doesn't seem to exist on this system."; \
if [ ! -w ${_DISTDIR}/. ]; then \
${ECHO_MSG} "=> Can't download to ${_DISTDIR} (permission denied?)."; \
exit 1; \
fi; \
for site in $$sites; do \
${ECHO_MSG} "=> Attempting to fetch $$bfile from $${site}."; \
if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${bfile} ${FETCH_AFTER_ARGS}; then \
if [ -n "${FAILOVER_FETCH}" -a -f ${DISTINFO_FILE} -a -f ${_DISTDIR}/$$bfile ]; then \
alg=`${AWK} 'NF == 4 && $$2 == "('$$file')" && $$3 == "=" {print $$1;}' ${DISTINFO_FILE}`; \
if [ -z "$$alg" ]; then \
alg=${DIGEST_ALGORITHM};\
fi; \
CKSUM=`${DIGEST} $$alg < ${_DISTDIR}/$$bfile`; \
CKSUM2=`${AWK} '$$1 == "'$$alg'" && $$2 == "('$$file')" {print $$4;}' <${DISTINFO_FILE}`; \
if [ "$$CKSUM" = "$$CKSUM2" -o "$$CKSUM2" = "IGNORE" ]; then \
continue 2; \
else \
${ECHO_MSG} "=> Checksum failure - trying next site."; \
fi; \
elif [ ! -f ${_DISTDIR}/$$bfile ]; then \
${ECHO_MSG} "=> FTP didn't fetch expected file, trying next site." ; \
else \
continue 2; \
fi; \
fi \
done; \
${ECHO_MSG} "=> Couldn't fetch $$bfile - please try to retrieve this";\
${ECHO_MSG} "=> file manually into ${_DISTDIR} and try again."; \
exit 1; \
fi
_CHECK_DIST_PATH= \
if [ "X${DIST_PATH}" != "X" ]; then \
for d in "" ${DIST_PATH:S/:/ /g}; do \
if [ "X$$d" = "X" -o "X$$d" = "X${DISTDIR}" ]; then continue; fi; \
if [ -f $$d/${DIST_SUBDIR}/$$bfile ]; then \
${ECHO} "Using $$d/${DIST_SUBDIR}/$$bfile"; \
${RM} -f $$bfile; \
${LN} -s $$d/${DIST_SUBDIR}/$$bfile $$bfile; \
break; \
fi; \
done; \
fi
#
# Sort the master site list according to the patterns in MASTER_SORT
#
MASTER_SORT?=
MASTER_SORT_REGEX?=
MASTER_SORT_REGEX+= ${MASTER_SORT:S/./\\./g:C/.*/:\/\/[^\/]*&\//}
MASTER_SORT_AWK= BEGIN { RS = " "; ORS = " "; IGNORECASE = 1 ; gl = "${MASTER_SORT_REGEX}"; }
.for srt in ${MASTER_SORT_REGEX}
MASTER_SORT_AWK+= /${srt:C/\//\\\//g}/ { good["${srt}"] = good["${srt}"] " " $$0 ; next; }
.endfor
MASTER_SORT_AWK+= { rest = rest " " $$0; } END { n=split(gl, gla); for(i=1;i<=n;i++) { print good[gla[i]]; } print rest; }
SORTED_MASTER_SITES_CMD= ${ECHO} '${MASTER_SITES}' | ${AWK} '${MASTER_SORT_AWK}'
.if !target(do-fetch)
do-fetch:
${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${_DISTDIR}
${_PKG_SILENT}${_PKG_DEBUG}cd ${_DISTDIR}; \
sites=`${SORTED_MASTER_SITES_CMD}`; \
for file in "" ${_DISTFILES}; do \
if [ "X$$file" = X"" ]; then continue; fi; \
bfile=`${BASENAME} $$file`; \
${_CHECK_DIST_PATH}; \
${_FETCH_FILE} \
done
. if defined(_PATCHFILES)
${_PKG_SILENT}${_PKG_DEBUG}cd ${_DISTDIR}; \
sites="${PATCH_SITES}"; \
for file in "" ${_PATCHFILES}; do \
if [ "X$$file" = X"" ]; then continue; fi; \
bfile=`${BASENAME} $$file`; \
${_CHECK_DIST_PATH}; \
${_FETCH_FILE} \
done
. endif
.endif
# show both build and run depends directories (non-recursively)
.if !target(show-depends-dirs)
show-depends-dirs:
${_PKG_SILENT}${_PKG_DEBUG} \
dlist="";\
thisdir=`pwd`;\
for reldir in "" ${DEPENDS:C/^[^:]*://:C/:.*$//} ${BUILD_DEPENDS:C/^[^:]*://:C/:.*$//} ;\
do \
if [ "X$$reldir" = "X" ]; then continue; fi ;\
cd $$thisdir/$$reldir ;\
PWD=`pwd` ;\
d=`dirname $$PWD` ;\
absdir=`basename $$d`/`basename $$PWD` ;\
dlist="$$dlist $$absdir";\
done ;\
cd $$thisdir ;\
${ECHO} "$$dlist"
.endif
.if !target(show-distfiles)
show-distfiles:
. if defined(IGNORE)
${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
. else
${_PKG_SILENT}${_PKG_DEBUG} \
for file in "" ${_CKSUMFILES}; do \
if [ "X$$file" = "X" ]; then continue; fi; \
${ECHO} $$file; \
done
. endif
.endif
.if !target(show-downlevel)
show-downlevel:
. if defined(IGNORE)
${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
. else
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_INFO} -e \"${PKGBASE}\" || ${TRUE}`"; \
if [ "X$$found" != "X" -a "X$$found" != "X${PKGNAME}" ]; then \
${ECHO} "${PKGBASE} package: $$found installed, pkgsrc version ${PKGNAME}"; \
if [ "X$$STOP_DOWNLEVEL_AFTER_FIRST" != "X" ]; then \
${ECHO} "stoping after first downlevel pkg found"; \
exit 1; \
fi; \
fi
. endif
.endif
.if !target(show-installed-depends)
show-installed-depends:
. if defined(DEPENDS)
@for i in ${DEPENDS:C/:.*$//:Q:S/\ / /g} ; do \
echo "$$i =>" `${PKG_INFO} -e $$i` ; \
done
. endif
.endif
.if defined(EVAL_PREFIX)
. for def in ${EVAL_PREFIX}
. if !defined(${def:C/=.*//}_DEFAULT)
${def:C/=.*//}_DEFAULT= ${X11PREFIX}
. endif
. if !defined(${def:C/=.*//})
_depend_${def:C/=.*//} != ${PKG_INFO} -e ${def:C/.*=//} 2>/dev/null; ${ECHO}
. if (${_depend_${def:C/=.*//}} == "")
${def:C/=.*//}=${${def:C/=.*//}_DEFAULT}
. else
_dir_${def:C/=.*//} != (${PKG_INFO} -qp ${def:C/.*=//} 2>/dev/null) | ${AWK} '{ print $$2; exit }'
${def:C/=.*//}=${_dir_${def:C/=.*//}}
MAKEFLAGS+= ${def:C/=.*//}=${_dir_${def:C/=.*//}}
. endif
. endif
. endfor
.endif
.if !target(show-pkgsrc-dir)
show-pkgsrc-dir:
. if defined(IGNORE)
${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
. else
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_INFO} -e \"${PKGWILDCARD}\" || ${TRUE}`"; \
if [ "X$$found" != "X" ]; then \
${ECHO} ${PKGPATH}; \
fi
. endif
.endif
# Extract
DOWNLOADED_DISTFILE= ${_DISTDIR}/$$file
.if !target(do-extract)
do-extract:
. ifndef KEEP_WRKDIR
${_PKG_SILENT}${_PKG_DEBUG}${RM} -rf ${WRKDIR}
. endif
${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${WRKDIR}
. ifdef WRKOBJDIR
${_PKG_SILENT}${_PKG_DEBUG} \
${RM} -f ${WRKDIR_BASENAME} || ${TRUE}; \
if ${LN} -s ${WRKDIR} ${WRKDIR_BASENAME} 2>/dev/null; then \
${ECHO} "${WRKDIR_BASENAME} -> ${WRKDIR}"; \
fi
. endif # WRKOBJDIR
${_PKG_SILENT}${_PKG_DEBUG} \
for file in "" ${EXTRACT_ONLY}; do \
if [ "X$$file" = X"" ]; then continue; fi; \
{ cd ${WRKDIR} && ${EXTRACT_CMD}; }; \
done
.endif
# Patch
.if !target(do-patch)
do-patch: uptodate-digest
. if defined(PATCHFILES)
@${ECHO_MSG} "${_PKGSRC_IN}> Applying distribution patches for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG}cd ${_DISTDIR}; \
for i in ${PATCHFILES}; do \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Applying distribution patch $$i" ; \
fi; \
case $$i in \
*.Z|*.gz) \
${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS} \
|| { ${ECHO} Patch $$i failed ; exit 1; } ; \
;; \
*.bz2) \
${BZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS} \
|| { ${ECHO} Patch $$i failed ; exit 1; } ; \
;; \
*) \
${PATCH} ${PATCH_DIST_ARGS} < $$i \
|| { ${ECHO} Patch $$i failed ; exit 1; } ; \
;; \
esac; \
done
. endif
${_PKG_SILENT}${_PKG_DEBUG}if [ -d ${PATCHDIR} ]; then \
if [ "`${ECHO} ${PATCHDIR}/patch-*`" = "${PATCHDIR}/patch-*" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Ignoring empty patch directory"; \
if [ -d ${PATCHDIR}/CVS ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Perhaps you forgot the -P flag to cvs co or update?"; \
fi; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> Applying ${OPSYS} patches for ${PKGNAME}" ; \
fail=""; \
for i in ${PATCHDIR}/patch-* ${LOCALPATCHES}/${PKGPATH}/* ; do \
if [ "$$i" = "${LOCALPATCHES}/${PKGPATH}/*" ]; then \
continue ; \
fi ; \
if [ ! -f "$$i" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> $$i is not a valid patch file - skipping" ; \
continue ; \
fi ; \
case $$i in \
*.orig|*.rej|*~) \
${ECHO_MSG} "${_PKGSRC_IN}> Ignoring patchfile $$i" ; \
continue; \
;; \
${PATCHDIR}/patch-local-*) \
;; \
${LOCALPATCHES}/${PKGPATH}/*) \
;; \
*) \
if [ -f ${DISTINFO_FILE} ]; then \
filename=`expr $$i : '.*/\(.*\)'`; \
algsum=`${AWK} 'NF == 4 && $$2 == "('$$filename')" && $$3 == "=" {print $$1 " " $$4}' ${DISTINFO_FILE} || ${TRUE}`; \
if [ "X$$algsum" != "X" ]; then \
alg=`${ECHO} $$algsum | ${AWK} '{ print $$1 }'`; \
recorded=`${ECHO} $$algsum | ${AWK} '{ print $$2 }'`; \
calcsum=`${SED} -e '/\$$NetBSD.*/d' $$i | ${DIGEST} $$alg`; \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "=> Verifying $$filename (using digest algorithm $$alg)" ; \
fi; \
fi; \
if [ "X$$algsum" = "X" -o "X$$recorded" = "X" ]; then \
${ECHO_MSG} "**************************************"; \
${ECHO_MSG} "Ignoring unknown patch file: $$i"; \
${ECHO_MSG} "**************************************"; \
continue; \
fi; \
if [ "X$$calcsum" != "X$$recorded" ]; then \
${ECHO_MSG} "**************************************"; \
${ECHO_MSG} "Patch file $$i has been modified"; \
${ECHO_MSG} "**************************************"; \
fail="$$fail $$filename"; \
continue; \
fi; \
fi; \
;; \
esac; \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Applying ${OPSYS} patch $$i" ; \
fi; \
fuzz=""; \
${PATCH} -v > /dev/null 2>&1 && fuzz="${PATCH_FUZZ_FACTOR}"; \
${PATCH} $$fuzz ${PATCH_ARGS} < $$i || \
{ ${ECHO} Patch $$i failed ; exit 1; } ; \
done; \
if [ "X$$fail" != "X" ]; then \
${ECHO_MSG} "Patching failed due to modified patch file(s): $$fail"; \
exit 1; \
fi; \
fi; \
fi
. if defined(REPLACE_PERL)
. for f in ${REPLACE_PERL}
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; if [ -f ${f} ]; then \
${SED} -e "s,/usr/bin/perl,${PERL5},g" \
-e "s,/usr/local/bin/perl,${PERL5},g" \
-e "s,/usr/pkg/bin/perl,${PERL5},g" \
${f} > ${f}.new; \
if [ -x ${f} ]; then \
${CHMOD} a+x ${f}.new; \
fi; \
${MV} -f ${f}.new ${f}; \
fi
. endfor
. endif
.endif
# Configure
.if !target(do-configure)
do-configure:
. if defined(REPLACE_NCURSES) && (!defined(NEED_NCURSES) || ${NEED_NCURSES} == "NO")
. for f in ${REPLACE_NCURSES}
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; if [ -f ${f} ]; then \
${SED} -e "s/ncurses/curses/g" ${f} > ${f}.new; \
if [ -x ${f} ]; then \
${CHMOD} a+x ${f}.new; \
fi; \
${MV} ${f}.new ${f}; \
fi
. endfor
. endif
. if defined(USE_LIBTOOL) && defined(LTCONFIG_OVERRIDE)
. for ltconfig in ${LTCONFIG_OVERRIDE}
${_PKG_SILENT}${_PKG_DEBUG}\
if [ -f ${ltconfig} ]; then \
${RM} -f ${ltconfig}; \
${ECHO} "${RM} -f libtool; ${LN} -s ${LIBTOOL} libtool" \
> ${ltconfig}; \
${CHMOD} +x ${ltconfig} ; \
fi
. endfor
. endif
${_PKG_SILENT}${_PKG_DEBUG}if [ -f ${SCRIPTDIR}/configure ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/configure; \
fi
. if defined(HAS_CONFIGURE)
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC} && ${SETENV} \
CC="${CC}" CFLAGS="${CFLAGS}" CPPFLAGS="${CPPFLAGS}" \
CXX="${CXX}" CXXFLAGS="${CXXFLAGS}" \
INSTALL="`${TYPE} ${INSTALL} | ${AWK} '{ print $$NF }'` -c -o ${BINOWN} -g ${BINGRP}" \
ac_given_INSTALL="`${TYPE} ${INSTALL} | ${AWK} '{ print $$NF }'` -c -o ${BINOWN} -g ${BINGRP}" \
INSTALL_DATA="${INSTALL_DATA}" \
INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
${CONFIGURE_ENV} ${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}
. endif
. if defined(USE_IMAKE)
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC} && ${SETENV} ${SCRIPTS_ENV} XPROJECTROOT=${X11BASE} ${XMKMF}
. endif
. if defined(USE_LIBTOOL) && defined(LIBTOOL_OVERRIDE)
. for libtool in ${LIBTOOL_OVERRIDE}
${_PKG_SILENT}${_PKG_DEBUG}\
if [ -f ${libtool} ]; then \
${RM} -f ${libtool}; \
${LN} -sf ${LIBTOOL} ${libtool}; \
fi
. endfor
. endif
.endif
# Build
.if !target(do-build)
do-build:
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${MAKE_FLAGS} -f ${MAKEFILE} ${ALL_TARGET}
.endif
# Install
.if !target(do-install)
do-install:
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${MAKE_FLAGS} -f ${MAKEFILE} ${INSTALL_TARGET}
.endif
# Package
.if !target(real-su-package)
real-su-package: ${PLIST} ${DESCR}
${_PKG_SILENT}${_PKG_DEBUG}\
${ECHO_MSG} "${_PKGSRC_IN}> Building binary package for ${PKGNAME}"; \
if [ ! -d ${PKGREPOSITORY} ]; then \
${MKDIR} ${PKGREPOSITORY}; \
if [ $$? -ne 0 ]; then \
${ECHO_MSG} "=> Can't create directory ${PKGREPOSITORY}."; \
exit 1; \
fi; \
fi; \
if ${PKG_CREATE} ${PKG_ARGS_BINPKG} ${PKGFILE}; then \
${MAKE} ${MAKEFLAGS} package-links; \
else \
${MAKE} ${MAKEFLAGS} delete-package; \
exit 1; \
fi
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${PACKAGE_COOKIE}
. if defined(NO_BIN_ON_CDROM)
@${ECHO_MSG} "${_PKGSRC_IN}> Warning: ${PKGNAME} may not be put on a CD-ROM:"
@${ECHO_MSG} "${_PKGSRC_IN}> " ${NO_BIN_ON_CDROM:Q}
. endif
. if defined(NO_BIN_ON_FTP)
@${ECHO_MSG} "${_PKGSRC_IN}> Warning: ${PKGNAME} may not be made available through FTP:"
@${ECHO_MSG} "${_PKGSRC_IN}> " ${NO_BIN_ON_FTP:Q}
. endif
.endif
# Some support rules for real-su-package
.if !target(package-links)
package-links:
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} delete-package-links
${_PKG_SILENT}${_PKG_DEBUG}for cat in ${CATEGORIES}; do \
if [ ! -d ${PACKAGES}/$$cat ]; then \
${MKDIR} ${PACKAGES}/$$cat; \
if [ $$? -ne 0 ]; then \
${ECHO_MSG} "=> Can't create directory ${PACKAGES}/$$cat."; \
exit 1; \
fi; \
fi; \
${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \
${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \
done;
.endif
.if !target(delete-package-links)
delete-package-links:
${_PKG_SILENT}${_PKG_DEBUG}\
${FIND} ${PACKAGES} -type l -name ${PKGNAME}${PKG_SUFX} | ${XARGS} ${RM} -f
.endif
.if !target(delete-package)
delete-package:
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} delete-package-links
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${PKGFILE}
.endif
################################################################
# This is the "generic" package target, actually a macro used from the
# six main targets. See below for more.
################################################################
_PORT_USE: .USE
.if make(real-extract)
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} install-depends DEPENDS_TARGET=${DEPENDS_TARGET}
.endif
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKEFLAGS} ${.TARGET:S/^real-/pre-/}
${_PKG_SILENT}${_PKG_DEBUG}if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/} ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \
fi
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKEFLAGS} ${.TARGET:S/^real-/do-/}
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKEFLAGS} ${.TARGET:S/^real-/post-/}
${_PKG_SILENT}${_PKG_DEBUG}if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/post-/} ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/${.TARGET:S/^real-/post-/}; \
fi
.if !make(real-fetch) \
&& (!make(real-package) || !defined(PACKAGE_NOINSTALL))
${_PKG_SILENT}${_PKG_DEBUG} \
${TOUCH} ${TOUCH_FLAGS} ${WRKDIR}/.${.TARGET:S/^real-//}_done
.endif
real-su-install: ${MESSAGE}
.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER)
. if defined(CONFLICTS)
${_PKG_SILENT}${_PKG_DEBUG} \
${RM} -f ${WRKDIR}/.CONFLICTS
. for conflict in ${CONFLICTS}
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_INFO} -e \"${conflict}\" || ${TRUE}`"; \
if [ X"$$found" != X"" ]; then \
${ECHO} "$$found" >> ${WRKDIR}/.CONFLICTS; \
fi
. endfor
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -s ${WRKDIR}/.CONFLICTS ]; then \
found=`${SED} -e s'|${PKG_DBDIR}/||g' ${WRKDIR}/.CONFLICTS | tr '\012' ' '`; \
${ECHO_MSG} "${_PKGSRC_IN}> ${PKGNAME} conflicts with installed package(s): $$found found."; \
${ECHO_MSG} "*** They install the same files into the same place."; \
${ECHO_MSG} "*** Please remove $$found first with pkg_delete(1)."; \
${RM} -f ${WRKDIR}/.CONFLICTS; \
exit 1; \
fi
. endif # CONFLICTS
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_INFO} -e \"${PKGWILDCARD}\" || ${TRUE}`"; \
if [ "$$found" != "" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> $$found is already installed - perhaps an older version?"; \
${ECHO_MSG} "*** If so, you may wish to \`\`pkg_delete $$found'' and install"; \
${ECHO_MSG} "*** this package again by \`\`${MAKE} reinstall'' to upgrade it properly,"; \
${ECHO_MSG} "*** or use \`\`${MAKE} update'' to upgrade it and all of its dependencies."; \
${ECHO_MSG} "*** If you really wish to overwrite the old package of $$found"; \
${ECHO_MSG} "*** without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \
${ECHO_MSG} "*** in your environment or the \"${MAKE} install\" command line."; \
exit 1; \
fi
.endif # !NO_PKG_REGISTER && !NO_FORCE_REGISTER
${_PKG_SILENT}${_PKG_DEBUG}if [ `${SH} -c umask` -ne ${DEF_UMASK} ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Warning: your umask is \"`${SH} -c umask`"\".; \
${ECHO_MSG} "If this is not desired, set it to an appropriate value (${DEF_UMASK})"; \
${ECHO_MSG} "and install this package again by \`\`${MAKE} deinstall reinstall''."; \
fi
.if !defined(NO_MTREE)
${_PKG_SILENT}${_PKG_DEBUG}if [ `${ID} -u` = 0 ]; then \
if [ ! -f ${MTREE_FILE} ]; then \
${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \
exit 1; \
else \
if [ ! -d ${PREFIX} ]; then \
${MKDIR} ${PREFIX}; \
fi; \
${MTREE} ${MTREE_ARGS} ${PREFIX}/; \
fi; \
else \
${ECHO_MSG} "Warning: not superuser, can't run mtree."; \
${ECHO_MSG} "Become root and try again to ensure correct permissions."; \
fi
.endif # !NO_MTREE
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKEFLAGS} pre-install
${_PKG_SILENT}${_PKG_DEBUG}if [ -f ${SCRIPTDIR}/pre-install ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/pre-install; \
fi
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKEFLAGS} do-install
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKEFLAGS} post-install
${_PKG_SILENT}${_PKG_DEBUG}if [ -f ${SCRIPTDIR}/post-install ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/post-install; \
fi
.for f in ${INFO_FILES}
${_PKG_SILENT}${_PKG_DEBUG}${ECHO} "install-info --info-dir=${PREFIX}/info ${PREFIX}/info/${f}"; \
install-info --remove --info-dir=${PREFIX}/info ${PREFIX}/info/${f}; \
install-info --info-dir=${PREFIX}/info ${PREFIX}/info/${f}
.endfor
@# PLIST must be generated at this late point (instead of
@# depending on it somewhere earlier), as the
@# pre/do/post-install aren't run then yet:
@${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} ${PLIST}
${_PKG_SILENT}${_PKG_DEBUG}newmanpages=`${EGREP} -h \
'^([^@/]*/)*man/([^/]*/)?(man[1-9ln]/.*\.[1-9ln]|cat[1-9ln]/.*\.0)(\.gz)?$$' \
${PLIST} 2>/dev/null || ${TRUE}`; \
if [ X"${MANCOMPRESSED}" != X"" -a X"${MANZ}" = X"" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> [Automatic manual page handling]"; \
${ECHO_MSG} "${_PKGSRC_IN}> Decompressing manual pages for ${PKGNAME}"; \
for manpage in $$newmanpages; do \
manpage=`${ECHO} $$manpage | ${SED} -e 's|\.gz$$||'`; \
if [ -h ${PREFIX}/$$manpage.gz ]; then \
set - `${FILE_CMD} ${PREFIX}/$$manpage.gz | ${SED} -e 's|\.gz$$||'`; \
shift `expr $$# - 1`; \
${RM} -f ${PREFIX}/$$manpage; \
${LN} -s $${1} ${PREFIX}/$$manpage; \
${RM} ${PREFIX}/$$manpage.gz; \
else \
${GUNZIP_CMD} ${PREFIX}/$$manpage.gz; \
fi; \
if [ X"${PKG_VERBOSE}" != X"" ]; then \
${ECHO_MSG} "$$manpage"; \
fi; \
done; \
fi; \
if [ X"${MANCOMPRESSED}" = X"" -a X"${MANZ}" != X"" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> [Automatic manual page handling]"; \
${ECHO_MSG} "${_PKGSRC_IN}> Compressing manual pages for ${PKGNAME}"; \
for manpage in $$newmanpages; do \
manpage=`${ECHO} $$manpage | ${SED} -e 's|\.gz$$||'`; \
if [ -h ${PREFIX}/$$manpage ]; then \
set - `${FILE_CMD} ${PREFIX}/$$manpage`; \
shift `expr $$# - 1`; \
${RM} -f ${PREFIX}/$$manpage.gz; \
${LN} -s $${1}.gz ${PREFIX}/$$manpage.gz; \
${RM} ${PREFIX}/$$manpage; \
else \
${GZIP_CMD} ${PREFIX}/$$manpage; \
fi; \
if [ X"${PKG_VERBOSE}" != X"" ]; then \
${ECHO_MSG} "$$manpage"; \
fi; \
done; \
fi
.if ${OPSYS} == "NetBSD" || ${OPSYS} == "SunOS"
${_PKG_SILENT}${_PKG_DEBUG}\
${MAKE} ${MAKEFLAGS} do-shlib-handling SHLIB_PLIST_MODE=0
.endif # OPSYS == "NetBSD" || OPSYS == "SunOS"
.ifdef MESSAGE
@${ECHO_MSG} "${_PKGSRC_IN}> Please note the following:"
@${ECHO_MSG} ""
@${CAT} ${MESSAGE}
@${ECHO_MSG} ""
.endif
.if !defined(NO_PKG_REGISTER)
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} fake-pkg
.endif # !NO_PKG_REGISTER
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.if defined(PKG_DEVELOPER) && (${CHECK_SHLIBS} == "YES")
@${MAKE} ${MAKEFLAGS} check-shlibs
.endif
# Do handling of shared libs for two cases:
#
# SHLIB_PLIST_MODE=1: when first called via the ${PLIST} target,
# update the PLIST to contain ELF symlink, run
# ldconfig on a.out, etc. (used when called via
# the ${PLIST} target). Will update ${PLIST}.
# SHLIB_PLIST_MODE=0: when called via the real-su-install target,
# actually generate symlinks for ELF, run ldconfig
# for a.out, etc. Will not modify ${PLIST}.
#
# XXX This target could need some cleanup after it was ripped out of
# real-su-install
#
do-shlib-handling:
.if ${SHLIB_HANDLING} == "YES"
${_PKG_SILENT}${_PKG_DEBUG} \
sos=`${EGREP} -h -x '.*/lib[^/]+\.so\.[0-9]+(\.[0-9]+)+' ${PLIST} || ${TRUE}`; \
if [ "$$sos" != "" ]; then \
shlib_type=`${MAKE} ${MAKEFLAGS} show-shlib-type`; \
if [ "${SHLIB_PLIST_MODE}" = "0" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> [Automatic $$shlib_type shared object handling]"; \
fi; \
case "$$shlib_type" in \
ELF) ;; \
"a.out") \
${AWK} ' \
BEGIN { linkc = 1 } \
/^@/ { lines[NR] = $$0; next } \
function libtool_release(lib) { \
if (gsub("-[^-]+\.so\.", "\.so\.", lib)) { \
if (system("${TEST} -h ${PREFIX}/" lib) == 0) { \
rels[NR] = lib; \
} \
} \
} \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+\.[0-9]+$$/ { \
libtool_release($$0); \
lines[NR] = $$0; \
sub("\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
sub("\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
sub("\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
if (sub("-[^-]+\.so$$", "\.so")) { \
links[linkc++] = $$0; \
} \
next \
} \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+$$/ { \
libtool_release($$0); \
lines[NR] = $$0; \
sub("\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
sub("\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
if (sub("-[^-]+\.so$$", "\.so")) { \
links[linkc++] = $$0; \
} \
next \
} \
{ lines[NR] = $$0 } \
END { \
for (i = 1 ; i <= linkc ; i++) \
for (j = 1 ; j < NR ; j++) \
if (lines[j] == links[i]) \
lines[j] = "@comment " lines[j]; \
if (${SHLIB_PLIST_MODE}) \
for (i = 1 ; i <= NR ; i++) { \
print lines[i]; \
if (rels[i] != "") \
print rels[i]; \
} \
} \
' <${PLIST} >${PLIST}.tmp ; \
if [ "${SHLIB_PLIST_MODE}" = "1" ]; then \
${MV} ${PLIST}.tmp ${PLIST}; \
else \
${RM} ${PLIST}.tmp ; \
fi ; \
cnt=`${EGREP} -c -x '@exec[ ]*${LDCONFIG}' ${PLIST} || ${TRUE}`; \
if [ "${SHLIB_PLIST_MODE}" = "1" ]; then \
if [ $$cnt -eq 0 ]; then \
${ECHO} "@exec ${LDCONFIG}" >> ${PLIST}; \
${ECHO} "@unexec ${LDCONFIG}" >> ${PLIST}; \
fi \
fi; \
if [ "${SHLIB_PLIST_MODE}" = "0" ]; then \
if [ "${PKG_VERBOSE}" != "" ]; then \
${ECHO_MSG} "$$sos"; \
${ECHO_MSG} "Running ${LDCONFIG}"; \
fi; \
${LDCONFIG} || ${TRUE}; \
fi \
;; \
"*") \
if [ "${SHLIB_PLIST_MODE}" = "0" ]; then \
${ECHO_MSG} "No shared libraries for ${MACHINE_ARCH}"; \
fi ; \
if [ "${SHLIB_PLIST_MODE}" = "1" ]; then \
for so in $$sos; do \
if [ X"${PKG_VERBOSE}" != X"" ]; then \
${ECHO_MSG} >&2 "Ignoring $$so"; \
fi; \
${SED} -e "s;^$$so$$;@comment No shared objects - &;" \
${PLIST} >${PLIST}.tmp && ${MV} ${PLIST}.tmp ${PLIST}; \
done; \
fi ; \
;; \
esac; \
fi
.endif # SHLIB_HANDLING == "YES"
# Check if all binaries and shlibs find their needed libs
# Must be run after "make install", so that files are installed, and
# ${PLIST} exists.
#
check-shlibs:
.if !defined(NO_PKG_REGISTER)
${_PKG_SILENT}${_PKG_DEBUG}\
bins=`${PKG_INFO} -qL ${PKGNAME} | { ${EGREP} -h '/(bin|sbin|libexec)/' || ${TRUE}; }`; \
if [ "${OBJECT_FMT}" = "ELF" ]; then \
shlibs=`${PKG_INFO} -qL ${PKGNAME} | { ${EGREP} -h '/lib/lib.*.so' || ${TRUE}; }`; \
else \
shlibs=""; \
fi ; \
if [ X${LDD} = X ]; then \
ldd=`${TYPE} ldd | ${AWK} '{ print $$NF }'` ; \
else \
ldd="${LDD}" ; \
fi ; \
for i in $${bins} $${shlibs} ; do \
err=`{ $$ldd $$i 2>&1 || ${TRUE}; } | { ${GREP} "not found" || ${TRUE}; }`; \
if [ "${PKG_VERBOSE}" != "" ]; then \
${ECHO} "$$ldd $$i" ; \
fi ; \
if [ "$$err" != "" ]; then \
${ECHO} "$$i: $$err" ; \
error=1; \
fi ; \
done ; \
if [ "$$error" = 1 ]; then \
${ECHO} "*** The above programs/libs will not find the listed shared libraries"; \
${ECHO} " at runtime. Please fix the package (add -Wl,-R.../lib in the right places)!" ; \
${SHCOMMENT} Might not error-out for non-pkg-developers; \
exit 1 ; \
fi
.endif # NO_PKG_REGISTER
.if !target(show-shlib-type)
# Show the shared lib type being built: one of ELF, a.out or none
show-shlib-type:
${_PKG_SILENT}${_PKG_DEBUG} \
cd ${WRKDIR} && \
sotype=none; \
if [ "X${MKPIC}" != "Xno" -a "X${NOPIC}" = "X" ]; then \
${ECHO} "int main() { exit(0); }" > a.$$$$.c; \
${CC} ${CFLAGS} a.$$$$.c -o a.$$$$.out; \
case `${FILE_CMD} a.$$$$.out` in \
*ELF*dynamically*) \
sotype=ELF ;; \
*shared*library*) \
sotype="a.out" ;; \
*dynamically*) \
sotype="a.out" ;; \
esac; \
fi; \
${ECHO} "$$sotype"; \
${RM} -f a.$$$$.c a.$$$$.out
.endif
################################################################
# Skeleton targets start here
#
# You shouldn't have to change these. Either add the pre-* or
# post-* targets/scripts or redefine the do-* targets. These
# targets don't do anything other than checking for cookies and
# call the necessary targets/scripts.
################################################################
.if !target(fetch)
fetch:
@cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-fetch
.endif
.if !target(extract)
extract: checksum ${EXTRACT_COOKIE}
.endif
.if !target(patch)
patch: extract ${PATCH_COOKIE}
.endif
.if !target(configure)
configure: patch ${CONFIGURE_COOKIE}
.endif
.if !target(build)
build: configure ${BUILD_COOKIE}
.endif
.if !target(install)
install: uptodate-pkgtools build ${INSTALL_COOKIE}
.endif
.if !target(package)
package: uptodate-pkgtools install ${PACKAGE_COOKIE}
.endif
${EXTRACT_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-extract DEPENDS_TARGET=${DEPENDS_TARGET}
${_PKG_SILENT}${_PKG_DEBUG}${ECHO} ${PKGNAME} >> ${EXTRACT_COOKIE}
${PATCH_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-patch
${CONFIGURE_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-configure
${BUILD_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-build
${INSTALL_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-install
${PACKAGE_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-package
# And call the macros
real-fetch: _PORT_USE
real-extract: _PORT_USE
@${ECHO_MSG} "${_PKGSRC_IN}> Extracting for ${PKGNAME}"
real-patch: _PORT_USE
@${ECHO_MSG} "${_PKGSRC_IN}> Patching for ${PKGNAME}"
real-configure: _PORT_USE
@${ECHO_MSG} "${_PKGSRC_IN}> Configuring for ${PKGNAME}"
real-build: _PORT_USE
@${ECHO_MSG} "${_PKGSRC_IN}> Building for ${PKGNAME}"
real-install: do-su-install
real-package: do-su-package
# sudo or priv are acceptable substitutes
SU_CMD?= ${SU} - root -c
PRE_ROOT_CMD?= ${TRUE}
_SU_TARGET= \
if [ `${ID} -u` = 0 ]; then \
${MAKE} ${MAKEFLAGS} $$realtarget; \
elif [ "X${BATCH}" != X"" ]; then \
${ECHO_MSG} "Warning: Batch mode, not superuser, can't run mtree."; \
${ECHO_MSG} "Become root and try again to ensure correct permissions."; \
else \
args=""; \
if [ "X${FORCE_PKG_REGISTER}" != X"" ]; then \
args="FORCE_PKG_REGISTER=1"; \
fi; \
if [ "X${PKG_DEBUG_LEVEL}" != X"" ]; then \
args="$$args PKG_DEBUG_LEVEL=${PKG_DEBUG_LEVEL}"; \
fi; \
if [ "X${PRE_ROOT_CMD}" != "X${TRUE}" ]; then \
${ECHO} "*** WARNING *** Running: ${PRE_ROOT_CMD}"; \
${PRE_ROOT_CMD}; \
fi; \
${ECHO_MSG} "${_PKGSRC_IN}> Becoming root@`/bin/hostname` to $$action ${PKGNAME}."; \
${ECHO_MSG} -n "`${ECHO} ${SU_CMD} | ${AWK} '{ print $$1 }'` ";\
${SU_CMD} "cd ${.CURDIR}; ${MAKE} $$args ${MAKEFLAGS} $$realtarget $$realflags"; \
fi
do-su-install:
${_PKG_SILENT}${_PKG_DEBUG} \
extractname=`${CAT} ${EXTRACT_COOKIE}`; \
case "$$extractname" in \
"") ${ECHO_MSG} "*** Warning: ${WRKDIR} may contain an older version of ${PKGBASE}" ;; \
"${PKGNAME}") ;; \
*) ${ECHO_MSG} "*** Error: Package version $$extractname in ${WRKDIR}"; \
${ECHO_MSG} "*** Current version ${PKGNAME} in pkgsrc directory"; \
${ECHO_MSG} "*** Please rebuild the package using the newer version: \"${MAKE} clean && ${MAKE}\""; \
exit 1 ;; \
esac
@${ECHO_MSG} "${_PKGSRC_IN}> Installing for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-install"; \
action="install"; \
${_SU_TARGET}
do-su-package:
@${ECHO_MSG} "${_PKGSRC_IN}> Packaging ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-package"; \
action="package"; \
${_SU_TARGET}
# Empty pre-* and post-* targets, note we can't use .if !target()
# in the _PORT_USE macro
.for name in fetch extract patch configure build install package
. if !target(pre-${name})
pre-${name}:
@${DO_NADA}
. endif
. if !target(post-${name})
post-${name}:
@${DO_NADA}
. endif
.endfor
# Reinstall
#
# Special target to re-run install
.if !target(reinstall)
reinstall:
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} ${PLIST}
${_PKG_SILENT}${_PKG_DEBUG}DEPENDS_TARGET=${DEPENDS_TARGET} ${MAKE} ${MAKEFLAGS} install
.endif
# Deinstall
#
# Special target to remove installation
.if !target(deinstall)
deinstall: do-su-deinstall
do-su-deinstall: uptodate-pkgtools
@${ECHO_MSG} "${_PKGSRC_IN}> Deinstalling for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-deinstall"; \
realflags="DEINSTALLDEPENDS=${DEINSTALLDEPENDS}"; \
action="deinstall"; \
${_SU_TARGET}
. if (${DEINSTALLDEPENDS} != "NO")
. if (${DEINSTALLDEPENDS} != "ALL")
# used for removing stuff in bulk builds
real-su-deinstall-flags+= -r -R
# used for "update" target
. else
real-su-deinstall-flags+= -r
. endif
. endif
. ifdef PKG_VERBOSE
real-su-deinstall-flags+= -v
. endif
real-su-deinstall:
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_INFO} -e \"${PKGWILDCARD}\" || ${TRUE}`"; \
if [ "$$found" != "" ]; then \
${ECHO} Running ${PKG_DELETE} ${real-su-deinstall-flags} $$found ; \
${PKG_DELETE} ${real-su-deinstall-flags} $$found || ${TRUE} ; \
fi
. if (${DEINSTALLDEPENDS} != "NO") && (${DEINSTALLDEPENDS} != "ALL")
@${SHCOMMENT} Also remove BUILD_DEPENDS:
. for pkg in ${BUILD_DEPENDS:C/:.*$//}
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_INFO} -e \"${pkg}\" || ${TRUE}`"; \
if [ "$$found" != "" ]; then \
${ECHO} Running ${PKG_DELETE} $$found ; \
${PKG_DELETE} ${real-su-deinstall-flags} $$found || ${TRUE} ; \
fi
. endfor
. endif # DEINSTALLDEPENDS
@${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
.endif # target(deinstall)
################################################################
# Some more targets supplied for users' convenience
################################################################
# The 'update' target can be used to update a package and all
# currently installed packages that depend upon this package.
.if exists(${DDIR})
RESUMEUPDATE?= YES
CLEAR_DIRLIST?= NO
update:
${_PKG_SILENT}${_PKG_DEBUG}${ECHO_MSG} \
"${_PKGSRC_IN}> Resuming update for ${PKGNAME}"
. if ${REINSTALL} != "NO"
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} deinstall DEINSTALLDEPENDS=ALL
. endif
.else
RESUMEUPDATE?= NO
CLEAR_DIRLIST?= YES
update:
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} ${DDIR}
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} deinstall DEINSTALLDEPENDS=ALL
.endif
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} ${UPDATE_TARGET} KEEP_WRKDIR=YES \
DEPENDS_TARGET=${DEPENDS_TARGET}
${_PKG_SILENT}${_PKG_DEBUG} \
[ ! -s ${DDIR} ] || for dep in `${CAT} ${DDIR}` ; do \
(if cd ../.. && cd "$${dep}" ; then \
${ECHO_MSG} "${_PKGSRC_IN}> Installing in $${dep}" && \
if [ "${RESUMEUPDATE}" = "NO" -o \
"${REINSTALL}" != "NO" ] ; then \
${MAKE} ${MAKEFLAGS} deinstall; \
fi && \
${MAKE} ${MAKEFLAGS} ${UPDATE_TARGET} \
DEPENDS_TARGET=${DEPENDS_TARGET} ; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> Skipping removed directory $${dep}";\
fi) ; \
done
.if ${NOCLEAN} == "NO"
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} clean-update CLEAR_DIRLIST=YES
.endif
clean-update:
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} ${DDIR}
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -s ${DDIR} ] ; then \
for dep in `${CAT} ${DDIR}` ; do \
(if cd ../.. && cd "$${dep}" ; then \
${MAKE} ${MAKEFLAGS} clean ; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> Skipping removed directory $${dep}";\
fi) ; \
done ; \
fi
.if ${CLEAR_DIRLIST} != "NO"
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} clean
.else
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} clean update-dirlist \
DIRLIST="`${CAT} ${DDIR}`" PKGLIST="`${CAT} ${DLIST}`"
${_PKG_SILENT}${_PKG_DEBUG}${ECHO_MSG} \
"${_PKGSRC_IN}> Warning: preserved leftover directory list. Your next";\
${ECHO_MSG} "${_PKGSRC_IN}> \`\`${MAKE} update'' may fail. It is advised to use";\
${ECHO_MSG} "${_PKGSRC_IN}> \`\`${MAKE} update REINSTALL=YES'' instead!"
.endif
update-dirlist:
${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} -p ${WRKDIR}
.ifdef PKGLIST
. for __tmp__ in ${PKGLIST}
${_PKG_SILENT}${_PKG_DEBUG}${ECHO} >>${DLIST} "${__tmp__}"
. endfor
.endif
.ifdef DIRLIST
. for __tmp__ in ${DIRLIST}
${_PKG_SILENT}${_PKG_DEBUG}${ECHO} >>${DDIR} "${__tmp__}"
. endfor
.endif
${DDIR}: ${DLIST}
${_PKG_SILENT}${_PKG_DEBUG} \
ddir=`${SED} 's:-[^-]*$$::' ${DLIST}`; \
${ECHO} >${DDIR}; \
for pkg in $${ddir} ; do \
if ${PKG_INFO} -b $${pkg} >/dev/null 2>&1 ; then \
${PKG_INFO} -b $${pkg} | ${SED} -ne \
's,\([^/]*/[^/]*\)/Makefile:.*,\1,p' | \
${HEAD} -1 >>${DDIR}; \
fi ; \
done
${DLIST}:
${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} -p ${WRKDIR}
${_PKG_SILENT}${_PKG_DEBUG} \
{ ${PKG_INFO} -R "${PKGWILDCARD}" || ${TRUE}; } | \
${TAIL} -n +4 >${DLIST}
# The 'info' target can be used to display information about a package.
info: uptodate-pkgtools
${_PKG_SILENT}${_PKG_DEBUG}${PKG_INFO} ${PKGWILDCARD}
# The 'check' target can be used to check an installed package.
check: uptodate-pkgtools
${_PKG_SILENT}${_PKG_DEBUG}${PKG_ADMIN} check ${PKGWILDCARD}
# Run pkglint:
lint:
${_PKG_SILENT}${_PKG_DEBUG}${LOCALBASE}/bin/pkglint
# Create a binary package from an install package using "pkg_tarup"
tarup:
${_PKG_SILENT}${_PKG_DEBUG} \
${RM} -f ${PACKAGES}/All/${PKGNAME}${PKG_SUFX}; \
PKG_DBDIR=${PKG_DBDIR} PKG_SUFX=${PKG_SUFX:S/.//} \
PKGREPOSITORY=${PACKAGES}/All \
${LOCALBASE}/bin/pkg_tarup ${PKGNAME}; \
for CATEGORY in ${CATEGORIES}; do \
${MKDIR} ${PACKAGES}/$$CATEGORY; \
cd ${PACKAGES}/$$CATEGORY; \
${RM} -f ${PKGNAME}${PKG_SUFX}; \
${LN} -s ../All/${PKGNAME}${PKG_SUFX}; \
done
# This is for the use of sites which store distfiles which others may
# fetch - only fetch the distfile if it is allowed to be
# re-distributed freely
mirror-distfiles:
.if !defined(NO_SRC_ON_FTP)
@${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} fetch NO_IGNORE=yes NO_CHECK_DEPENDS=yes
.endif
# Cleaning up
.if !target(pre-clean)
pre-clean:
@${DO_NADA}
.endif
.if !target(clean)
clean: pre-clean
. if (${CLEANDEPENDS} != "NO") && (defined(BUILD_DEPENDS) || defined(DEPENDS))
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} clean-depends
. endif
@${ECHO_MSG} "${_PKGSRC_IN}> Cleaning for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -d ${WRKDIR} ]; then \
if [ -w ${WRKDIR} ]; then \
${RM} -rf ${WRKDIR}; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> ${WRKDIR} not writable, skipping"; \
fi; \
fi
. ifdef WRKOBJDIR
-${_PKG_SILENT}${_PKG_DEBUG} \
${RMDIR} ${BUILD_DIR} 2>/dev/null; \
${RM} -f ${WRKDIR_BASENAME}
. endif
.endif
.if !target(clean-depends)
clean-depends:
. if defined(BUILD_DEPENDS) || defined(DEPENDS)
${_PKG_SILENT}${_PKG_DEBUG} \
for i in `${MAKE} ${MAKEFLAGS} CLEAN_DEPENDS_LIST_TOP=YES clean-depends-list | ${SED} -e 's;\.\./[^ ]*; ;g' | ${TR} -s "[:space:]" "\n" | ${SORT} -u` ;\
do \
cd ${.CURDIR}/../../$$i && \
${MAKE} ${MAKEFLAGS} CLEANDEPENDS=NO clean; \
done
. endif
.endif
# The clean-depends-list target will produce a list of all
# BUILD_DEPENDS and DEPENDS packages.
# As each *DEPENDS package is visited, it is added to the
# CLEAN_DEPENDS_LIST_SEEN variable. Once a pkg is in the list
# it will not be visited again. This prevents traversing the same
# part of the dependency tree multiple times. Each depending package
# ends up in the list twice. Once as the relative path from the depending
# package and once as the path from pkgsrc. Eg, "../../foo/bar foo/bar"
# The "../../foo/bar" version is later removed from the list in the
# clean-depends target. The remaining bit of redundancy is that some
# packages list their depends as "../bar" instead of "../../foo/bar"
# In this case its possible for a dependency to be visited twice.
.if !target(clean-depends-list)
clean-depends-list:
. if defined(BUILD_DEPENDS) || defined(DEPENDS)
@for dir in `${ECHO} ${BUILD_DEPENDS:C/^[^:]*://:C/:.*//} \
${DEPENDS:C/^[^:]*://:C/:.*//} | \
${TR} '\040' '\012' `; do \
case "$$CLEAN_DEPENDS_LIST_SEEN" in \
*" "$$dir" "*) ;; \
*) \
CLEAN_DEPENDS_LIST_SEEN=" $$dir `cd ${.CURDIR} ; cd $$dir && ${MAKE} ${MAKEFLAGS} CLEAN_DEPENDS_LIST_SEEN="$$CLEAN_DEPENDS_LIST_SEEN" CLEAN_DEPENDS_LIST_TOP=NO clean-depends-list`";\
;; \
esac \
done ; \
if [ "${CLEAN_DEPENDS_LIST_TOP}" != "YES" ]; then \
${ECHO} " ${PKGPATH} $$CLEAN_DEPENDS_LIST_SEEN"; \
else \
${ECHO} " $$CLEAN_DEPENDS_LIST_SEEN"; \
fi
. else
@if [ "${CLEAN_DEPENDS_LIST_TOP}" != "YES" ]; then \
${ECHO} " ${PKGPATH} $$CLEAN_DEPENDS_LIST_SEEN"; \
else \
${ECHO} " $$CLEAN_DEPENDS_LIST_SEEN"; \
fi
. endif
.endif
.if !target(pre-distclean)
pre-distclean:
@${DO_NADA}
.endif
.if !target(cleandir)
cleandir: clean
.endif
.if !target(distclean)
distclean: pre-distclean clean
${_PKG_SILENT}${ECHO_MSG} "${_PKGSRC_IN}> Dist cleaning for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG}if [ -d ${_DISTDIR} ]; then \
cd ${_DISTDIR} && \
${TEST} -z "${DISTFILES}" || ${RM} -f ${DISTFILES}; \
${TEST} -z "${PATCHFILES}" || ${RM} -f ${PATCHFILES}; \
fi
. if defined(DIST_SUBDIR) && exists(DIST_SUBDIR)
-${_PKG_SILENT}${_PKG_DEBUG}${RMDIR} ${_DISTDIR}
. endif
-${_PKG_SILENT}${_PKG_DEBUG}${RM} -f README.html
.endif
# Prints out a list of files to fetch (useful to do a batch fetch)
# are we called from bsd.pkg.subdir.mk (i.e. do we scan all dirs anyway)? XXX
.ifdef(_THISDIR_)
RECURSIVE_FETCH_LIST?= NO
.else
RECURSIVE_FETCH_LIST?= YES
.endif
.if !target(fetch-list)
fetch-list:
@${MAKE} ${MAKEFLAGS} fetch-list-recursive RECURSIVE_FETCH_LIST=${RECURSIVE_FETCH_LIST} | ${SORT} -u
.endif # !target(fetch-list)
.if !target(fetch-list-recursive)
fetch-list-recursive:
@${MAKE} ${MAKEFLAGS} fetch-list-one-pkg
. if ${RECURSIVE_FETCH_LIST} != "NO"
${_PKG_SILENT}${_PKG_DEBUG} \
for dir in `${ECHO} ${BUILD_DEPENDS:C/^[^:]*://:C/:.*//} \
${DEPENDS:C/^[^:]*://:C/:.*//} | \
${TR} '\040' '\012' | ${SORT} -u` ; do \
cd ${.CURDIR}/$$dir && \
${MAKE} ${MAKEFLAGS} fetch-list-recursive; \
done
. endif # ${RECURSIVE_FETCH_LIST} != "NO"
.endif # !target(fetch-list-recursive)
.if !target(fetch-list-one-pkg)
fetch-list-one-pkg:
@${MKDIR} ${_DISTDIR}
@[ -z "${_DISTDIR}" ] || ${ECHO} "${MKDIR} ${_DISTDIR}"
. if defined(DISTFILES)
@(cd ${_DISTDIR}; \
for file in "" ${DISTFILES}; do \
if [ "X$$file" = X"" ]; then continue; fi; \
bfile=`${BASENAME} $$file`; \
if [ ! -f $$file -a ! -f $$bfile ]; then \
${ECHO} -n "cd ${_DISTDIR} && [ -f $$file -o -f $$bfile ] || "; \
for site in "" `${SORTED_MASTER_SITES_CMD}`; do \
if [ "X$$site" = X"" ]; then continue; fi; \
${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '|| '; \
done; \
${ECHO} "${ECHO} $${file} not fetched"; \
fi \
done)
. endif # DISTFILES
. if defined(PATCHFILES)
@(cd ${_DISTDIR}; \
for file in "" ${PATCHFILES}; do \
if [ "X$$file" = X"" ]; then continue; fi; \
bfile=`${BASENAME} $$file`; \
if [ ! -f $$file -a ! -f $$bfile ]; then \
${ECHO} -n "cd ${_DISTDIR} && [ -f $$file -o -f $$bfile ] || "; \
for site in ${PATCH_SITES}; do \
${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '|| '; \
done; \
${ECHO} "${ECHO} $${file} not fetched"; \
fi \
done)
. endif # defined(PATCHFILES)
.endif # !target(fetch-list-one-pkg)
# Checksumming utilities
.if !target(makesum)
makesum: fetch uptodate-digest
${_PKG_SILENT}${_PKG_DEBUG} \
newfile=${DISTINFO_FILE}.$$$$; \
if [ -f ${DISTINFO_FILE} ]; then \
${AWK} -- '{print ; exit}' ${DISTINFO_FILE} > $$newfile; \
else \
${ECHO} -n "$$" > $$newfile; \
${ECHO} -n "NetBSD" >> $$newfile; \
${ECHO} "$$" >> $$newfile; \
fi; \
${ECHO} "" >> $$newfile; \
cd ${DISTDIR}; \
for sumfile in "" ${_CKSUMFILES}; do \
if [ "X$$sumfile" = "X" ]; then continue; fi; \
${DIGEST} ${DIGEST_ALGORITHM} $$sumfile >> $$newfile; \
${WC} -c $$sumfile | ${AWK} '{ print "Size (" $$2 ") = " $$1 " bytes" }' >> $$newfile; \
done; \
for ignore in "" ${_IGNOREFILES}; do \
if [ "X$$ignore" = "X" ]; then continue; fi; \
${ECHO} "${DIGEST_ALGORITHM} ($$ignore) = IGNORE" >> $$newfile; \
done; \
if [ -f ${DISTINFO_FILE} ]; then \
${AWK} '$$2 ~ /\(patch-[a-z0-9]+\)/ { print $$0 }' < ${DISTINFO_FILE} >> $$newfile; \
fi; \
if ${CMP} -s $$newfile ${DISTINFO_FILE}; then \
${RM} -f $$newfile; \
${ECHO_MSG} "=> distinfo: distfiles part unchanged."; \
else \
${MV} $$newfile ${DISTINFO_FILE}; \
fi
.endif
.if !target(makepatchsum)
makepatchsum mps: uptodate-digest
${_PKG_SILENT}${_PKG_DEBUG} \
newfile=${DISTINFO_FILE}.$$$$; \
if [ -f ${DISTINFO_FILE} ]; then \
${AWK} '$$2 !~ /\(patch-[a-z0-9]+\)/ { print $$0 }' < ${DISTINFO_FILE} >> $$newfile; \
else \
${ECHO} -n "$$" > $$newfile; \
${ECHO} -n "NetBSD" >> $$newfile; \
${ECHO} "$$" >> $$newfile; \
fi; \
if [ -d ${PATCHDIR} ]; then \
(cd ${PATCHDIR}; \
for sumfile in "" patch-*; do \
if [ "X$$sumfile" = "X" ]; then continue; fi; \
if [ "X$$sumfile" = "Xpatch-*" ]; then break; fi; \
case $$sumfile in \
patch-local-*) ;; \
*.orig|*.rej|*~) continue ;; \
*) ${ECHO} "${DIGEST_ALGORITHM} ($$sumfile) = `${SED} -e '/\$$NetBSD.*/d' $$sumfile | ${DIGEST} ${DIGEST_ALGORITHM}`" >> $$newfile;; \
esac; \
done); \
fi; \
if ${CMP} -s $$newfile ${DISTINFO_FILE}; then \
${RM} -f $$newfile; \
${ECHO_MSG} "=> distinfo: patches part unchanged."; \
else \
${MV} $$newfile ${DISTINFO_FILE}; \
fi
.endif
# This target is done by invoking a sub-make so that DISTINFO_FILE gets
# re-evaluated after the "makepatchsum" target is made. This can be
# made into:
#makedistinfo mdi: makepatchsum makesum
# once a combined distinfo file exists for all packages
.if !target(makedistinfo)
makedistinfo mdi distinfo: makepatchsum
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} makesum
.endif
.if !target(checksum)
checksum: fetch uptodate-digest
${_PKG_SILENT}${_PKG_DEBUG} \
if [ ! -f ${DISTINFO_FILE} ]; then \
${ECHO_MSG} "=> No checksum file."; \
else \
(cd ${DISTDIR}; OK="true"; \
for file in "" ${_CKSUMFILES}; do \
if [ "X$$file" = X"" ]; then continue; fi; \
alg=`${AWK} 'NF == 4 && $$2 == "('$$file')" && $$3 == "=" {print $$1;}' ${DISTINFO_FILE}`; \
if [ "X$$alg" = "X" ]; then \
${ECHO_MSG} "=> No checksum recorded for $$file."; \
OK="false"; \
else \
CKSUM=`${DIGEST} $$alg < $$file`; \
CKSUM2=`${AWK} '$$1 == "'$$alg'" && $$2 == "('$$file')"{print $$4;}' ${DISTINFO_FILE}`; \
if [ "$$CKSUM2" = "IGNORE" ]; then \
${ECHO_MSG} "=> Checksum for $$file is set to IGNORE in checksum file even though"; \
${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \
OK="false"; \
elif [ "$$CKSUM" = "$$CKSUM2" ]; then \
${ECHO_MSG} "=> Checksum OK for $$file."; \
else \
${ECHO_MSG} "=> Checksum mismatch for $$file."; \
OK="false"; \
fi; \
fi; \
done; \
for file in "" ${_IGNOREFILES}; do \
if [ "X$$file" = X"" ]; then continue; fi; \
CKSUM2=`${AWK} 'NF == 4 && $$3 == "=" && $$2 == "('$$file')"{print $$4;}' ${DISTINFO_FILE}`; \
if [ "$$CKSUM2" = "" ]; then \
${ECHO_MSG} "=> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \
OK="false"; \
elif [ "$$CKSUM2" != "IGNORE" ]; then \
${ECHO_MSG} "=> Checksum for $$file is not set to IGNORE in checksum file even though"; \
${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \
OK="false"; \
fi; \
done; \
if [ "$$OK" != "true" ]; then \
${ECHO_MSG} "Make sure the Makefile and checksum file (${DISTINFO_FILE})"; \
${ECHO_MSG} "are up to date. If you want to override this check, type"; \
${ECHO_MSG} "\"${MAKE} NO_CHECKSUM=yes [other args]\"."; \
exit 1; \
fi) ; \
fi
.endif
# List of sites carrying binary pkgs. Variables "rel" and "arch" are
# replaced with OS release ("1.5", ...) and architecture ("mipsel", ...)
BINPKG_SITE?= \
ftp://ftp.netbsd.org/pub/NetBSD/packages/$${rel}/$${arch}
# List of flags to pass to pkg_add(8) for bin-install:
BIN_INSTALL_FLAGS?= # -v
# Install binary pkg, without strict uptodate-check first
bin-install:
@found="`${PKG_INFO} -e \"${PKGWILDCARD}\" || ${TRUE}`"; \
if [ "$$found" != "" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> $$found is already installed - perhaps an older version?"; \
${ECHO_MSG} "*** If so, you may wish to \`\`pkg_delete $$found'' and install"; \
${ECHO_MSG} "*** this package again by \`\`${MAKE} bin-install'' to upgrade it properly."; \
${SHCOMMENT} ${ECHO_MSG} "*** or use \`\`${MAKE} bin-update'' to upgrade it and all of its dependencies."; \
exit 1; \
fi
@if [ -f ${PKGFILE} ] ; then \
${ECHO_MSG} "Installing from binary pkg ${PKGFILE}" ; \
${PKG_ADD} ${PKGFILE} ; \
else \
rel=`${UNAME} -r | ${SED} 's@\.\([0-9]*\)[\._].*@\.\1@'`; \
arch=`sysctl -n hw.machine_arch`; \
for site in ${BINPKG_SITE} ; do \
${ECHO} Trying `eval ${ECHO} $$site`/All ; \
${SHCOMMENT} ${ECHO} ${SETENV} PKG_PATH="`eval ${ECHO} $$site`/All" ${PKG_ADD} ${BIN_INSTALL_FLAGS} ${PKGNAME}${PKG_SUFX} ; \
if ${SETENV} PKG_PATH="`eval ${ECHO} $$site`/All" ${PKG_ADD} ${BIN_INSTALL_FLAGS} ${PKGNAME}${PKG_SUFX} ; then \
${ECHO} "${PKGNAME} successfully installed." ; \
break ; \
fi ; \
done ; \
if ! ${PKG_INFO} -qe ${PKGNAME} ; then \
${SHCOMMENT} Cycle through some FTP server here ;\
${ECHO_MSG} "Installing from source" ; \
${MAKE} ${MAKEFLAGS} package && \
${MAKE} ${MAKEFLAGS} clean ; \
fi ; \
fi
################################################################
# The special package-building targets
# You probably won't need to touch these
################################################################
# Set to "html" by the README.html target to generate HTML code,
# or to "svr4" to print SVR4 (Solaris, ...) short package names, from
# SVR4_PKGNAME variable.
# This variable is passed down via build-depends-list and run-depends-list
PACKAGE_NAME_TYPE?= name
# Nobody should want to override this unless PKGNAME is simply bogus.
.if !target(package-name)
package-name:
. if (${PACKAGE_NAME_TYPE} == "html")
@${ECHO} '<a href="../../${PKGPATH:S/&/\&amp;/g:S/>/\&gt;/g:S/</\&lt;/g}/README.html">${PKGNAME:S/&/\&amp;/g:S/>/\&gt;/g:S/</\&lt;/g}</A>'
. elif (${PACKAGE_NAME_TYPE} == "svr4")
@${ECHO} ${SVR4_PKGNAME}
. else
@${ECHO} ${PKGNAME}
. endif # PACKAGE_NAME_TYPE
.endif # !target(package-name)
.if !target(make-readme-html-help)
make-readme-html-help:
@${ECHO} '${PKGNAME:S/&/\&amp;/g:S/>/\&gt;/g:S/</\&lt;/g}</a>: <TD>'${COMMENT:S/&/\&amp;/g:S/>/\&gt;/g:S/</\&lt;/g:Q}
.endif # !target(make-readme-html-help)
# Show (recursively) all the packages this package depends on.
# If PACKAGE_DEPENDS_WITH_PATTERNS is set, print as pattern (if possible)
PACKAGE_DEPENDS_WITH_PATTERNS?=true
# To be used (-> true) ONLY if the pkg in question is known to be installed
# (i.e. when calling for pkg_create args, and for fake-pkg)
# Will probably not work with PACKAGE_DEPENDS_WITH_PATTERNS=false ...
PACKAGE_DEPENDS_QUICK?=false
.if !target(run-depends-list)
run-depends-list:
. for dep in ${DEPENDS}
@pkg="${dep:C/:.*//}"; \
dir="${dep:C/[^:]*://}"; \
cd ${.CURDIR}; \
if ${PACKAGE_DEPENDS_WITH_PATTERNS}; then \
${ECHO} "$$pkg"; \
else \
if cd $$dir 2>/dev/null; then \
${MAKE} ${MAKEFLAGS} package-name PACKAGE_NAME_TYPE=${PACKAGE_NAME_TYPE}; \
else \
${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \
fi; \
fi; \
if ${PACKAGE_DEPENDS_QUICK} ; then \
${PKG_INFO} -qf "$$pkg" | ${AWK} '/^@pkgdep/ {print $$2}'; \
else \
if cd $$dir 2>/dev/null; then \
${MAKE} ${MAKEFLAGS} run-depends-list PACKAGE_NAME_TYPE=${PACKAGE_NAME_TYPE} PACKAGE_DEPENDS_WITH_PATTERNS=${PACKAGE_DEPENDS_WITH_PATTERNS}; \
else \
${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \
fi; \
fi
. endfor
.endif # target(run-depends-list)
# Build a package but don't check the package cookie
.if !target(repackage)
repackage: pre-repackage package
pre-repackage:
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${PACKAGE_COOKIE}
.endif
# Build a package but don't check the cookie for installation, also don't
# install package cookie
.if !target(package-noinstall)
package-noinstall:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} PACKAGE_NOINSTALL=yes real-package
.endif
################################################################
# Dependency checking
################################################################
.if !target(install-depends)
# Tells whether to halt execution if the object formats differ
FATAL_OBJECT_FMT_SKEW?= yes
WARN_NO_OBJECT_FMT?= yes
install-depends: uptodate-pkgtools
. if defined(DEPENDS) || defined(BUILD_DEPENDS)
. if defined(NO_DEPENDS)
@${DO_NADA}
. else # !DEPENDS
. for dep in ${DEPENDS} ${BUILD_DEPENDS}
${_PKG_SILENT}${_PKG_DEBUG} \
pkg="${dep:C/:.*//}"; \
dir="${dep:C/[^:]*://:C/:.*$//}"; \
found=`${PKG_INFO} -e "$$pkg" || ${TRUE}`; \
if [ "X$$REBUILD_DOWNLEVEL_DEPENDS" != "X" ]; then \
pkgname=`cd $$dir ; ${MAKE} ${MAKEFLAGS} show-var VARNAME=PKGNAME`; \
if [ "X$$found" != "X" -a "X$$found" != "X$${pkgname}" ]; then \
${ECHO_MSG} "ignoring old installed package \"$$found\""; \
found=""; \
fi; \
fi; \
if [ "$$found" != "" ]; then \
instobjfmt=`${PKG_INFO} -B "$$pkg" | ${AWK} '/^OBJECT_FMT/ {print $$2}' | ${HEAD} -1`; \
if [ "$$instobjfmt" = "" ]; then \
if [ "X${WARN_NO_OBJECT_FMT}" != "Xno" ]; then \
${ECHO} "WARNING: Unknown object format for installed package $$pkg - continuing"; \
fi; \
elif [ "$$instobjfmt" != "${OBJECT_FMT}" ]; then \
${ECHO} "Installed package $$pkg is an $$instobjfmt package."; \
${ECHO} "You are building an ${OBJECT_FMT} package, which will not inter-operate."; \
${ECHO} "Please update the $$pkg package to ${OBJECT_FMT}"; \
if [ "X${FATAL_OBJECT_FMT_SKEW}" != "Xno" ]; then \
exit 1; \
fi; \
fi; \
if [ `${ECHO} $$found | ${WC} -w` -gt 1 ]; then \
${ECHO} '***' "WARNING: Dependency on '$$pkg' expands to several installed packages " ; \
${ECHO} " (" `${ECHO} $$found` ")." ; \
${ECHO} " Please check if this is really intended!" ; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> Required installed package $$pkg: $${found} found"; \
fi ; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> Required package $$pkg: NOT found"; \
target=${DEPENDS_TARGET}; \
${ECHO_MSG} "${_PKGSRC_IN}> Verifying $$target for $$dir"; \
if [ ! -d $$dir ]; then \
${ECHO_MSG} "=> No directory for $$dir. Skipping.."; \
else \
cd $$dir ; \
${MAKE} ${MAKEFLAGS} $$target _PKGSRC_DEPS=", ${PKGNAME}${_PKGSRC_DEPS}"; \
${ECHO_MSG} "${_PKGSRC_IN}> Returning to build of ${PKGNAME}"; \
fi; \
fi
. endfor # DEPENDS
. endif # !NO_DEPENDS
. endif # DEPENDS
.endif
real-fetch: check-depends
.if !target(check-depends)
check-depends:
. if (defined(DEPENDS) || defined(BUILD_DEPENDS)) && \
!defined(NO_DEPENDS) && !defined(NO_CHECK_DEPENDS) && !exists(${EXTRACT_COOKIE})
${_PKG_SILENT}${_PKG_DEBUG}\
${ECHO_MSG} "${_PKGSRC_IN}> Validating dependencies for ${PKGNAME}" ; \
${MAKE} ${MAKEFLAGS} DEPENDS_TARGET=check-depends ECHO_MSG=${TRUE:Q} IGNORE_FAIL=1 _DEPENDS_TARGET_OVERRIDE=1 install-depends || \
{ ${ECHO_MSG} "${_PKGSRC_IN}> ${PKGNAME} cannot build necessary dependencies."; ${FALSE}; }
. endif
.endif
.if !target(build-depends-list)
build-depends-list:
. for dir in ${BUILD_DEPENDS} ${DEPENDS}
${_PKG_SILENT}${_PKG_DEBUG} \
cd ${dir:C/^[^:]*://:C/:.*//}; \
${MAKE} ${MAKEFLAGS} package-name build-depends-list PACKAGE_NAME_TYPE=${PACKAGE_NAME_TYPE}
. endfor
.endif
# If PACKAGES is set to the default (../../pkgsrc/packages), the current
# ${MACHINE_ARCH} and "release" (uname -r) will be used. Otherwise a directory
# structure of ...pkgsrc/packages/`uname -r`/${MACHINE_ARCH} is assumed.
# The PKG_URL is set from FTP_PKG_URL_* or CDROM_PKG_URL_*, depending on
# the target used to generate the README.html file.
.if !target(binpkg-list)
binpkg-list:
@if [ -e ${PACKAGES} ]; then \
cd ${PACKAGES}; \
case ${.CURDIR} in \
*/pkgsrc/packages) \
for pkg in ${PKGREPOSITORYSUBDIR}/${PKGWILDCARD}${PKG_SUFX} ; \
do \
if [ -f "$$pkg" ] ; then \
pkgname=`${ECHO} $$pkg | ${SED} 's@.*/@@'`; \
${ECHO} "<TR><TD>${MACHINE_ARCH}:<TD><a href=\"${PKG_URL}/$$pkg\">$$pkgname</a><TD>(${OPSYS} ${OS_VERSION})"; \
fi ; \
done ; \
;; \
*) \
cd ${PACKAGES}/../..; \
for i in [1-9].*/*; do \
if cd ${PACKAGES}/../../$$i/${PKGREPOSITORYSUBDIR} 2>/dev/null; then \
for j in ${PKGWILDCARD}${PKG_SUFX}; \
do \
if [ -f "$$j" ]; then \
${ECHO} $$i/$$j;\
fi; \
done; \
fi; \
done | ${AWK} -F/ ' \
{ \
release = $$1; \
arch = $$2; \
pkg = $$3; \
gsub("\.tgz","", pkg); \
if (arch != "m68k" && arch != "mipsel") { \
if (arch in urls) \
urls[arch "/" pkg "/" release] = "<a href=\"${PKG_URL}/" release "/" arch "/${PKGREPOSITORYSUBDIR}/" pkg "${PKG_SUFX}\">" pkg "</a>, " urls[arch]; \
else \
urls[arch "/" pkg "/" release] = "<a href=\"${PKG_URL}/" release "/" arch "/${PKGREPOSITORYSUBDIR}/" pkg "${PKG_SUFX}\">" pkg "</a> "; \
} \
} \
END { \
for (av in urls) { \
split(av, ava, "/"); \
arch=ava[1]; \
pkg=ava[2]; \
release=ava[3]; \
print "<TR><TD>" arch ":<TD>" urls[av] "<TD>(${OPSYS} " release ")"; \
} \
}' | ${SORT} \
;; \
esac; \
fi
.endif
################################################################
# Everything after here are internal targets and really
# shouldn't be touched by anybody but the release engineers.
################################################################
# This target generates an index entry suitable for aggregation into
# a large index. Format is:
#
# distribution-name|package-path|installation-prefix|comment| \
# description-file|maintainer|categories|build deps|run deps|for arch
#
.if !target(describe)
describe:
@${ECHO} -n "${PKGNAME}|${.CURDIR}|"; \
${ECHO} -n "${PREFIX}|"; \
${ECHO} -n ${COMMENT:Q}; \
if [ -f ${DESCR_SRC} ]; then \
${ECHO} -n "|${DESCR_SRC}"; \
else \
${ECHO} -n "|/dev/null"; \
fi; \
${ECHO} -n "|${MAINTAINER}|${CATEGORIES}|"; \
case "A${BUILD_DEPENDS}B${DEPENDS}C" in \
ABC) ;; \
*) cd ${.CURDIR} && ${ECHO} -n `${MAKE} ${MAKEFLAGS} build-depends-list | ${SORT} -u`;; \
esac; \
${ECHO} -n "|"; \
if [ "${DEPENDS}" != "" ]; then \
cd ${.CURDIR} && ${ECHO} -n `${MAKE} ${MAKEFLAGS} run-depends-list | ${SORT} -u`; \
fi; \
${ECHO} -n "|"; \
if [ "${ONLY_FOR_ARCHS}" = "" ]; then \
${ECHO} -n "any"; \
else \
${ECHO} -n "${ONLY_FOR_ARCHS}"; \
fi; \
${ECHO} -n "|"; \
if [ "${NOT_FOR_OPSYS}" = "" ]; then \
${ECHO} -n "any"; \
else \
${ECHO} -n "not ${NOT_FOR_OPSYS}"; \
fi; \
${ECHO} ""
.endif
.if !target(readmes)
readmes: readme
.endif
# This target is used to generate README.html files
.if !target(readme)
FTP_PKG_URL_HOST?= ftp://ftp.netbsd.org
FTP_PKG_URL_DIR?= /pub/NetBSD/packages
readme:
@cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} README.html PKG_URL=${FTP_PKG_URL_HOST}${FTP_PKG_URL_DIR}
.endif
# This target is used to generate README.html files, very like "readme"
# However, a different target was used for ease of use.
.if !target(cdrom-readme)
CDROM_PKG_URL_HOST?= file://localhost
CDROM_PKG_URL_DIR?= /usr/pkgsrc/packages
cdrom-readme:
@cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} README.html PKG_URL=${CDROM_PKG_URL_HOST}${CDROM_PKG_URL_DIR}
.endif
README_NAME= ${TEMPLATES}/README.pkg
# set up the correct license information as a sed expression
.ifdef LICENSE
SED_LICENSE_EXPR= -e 's|%%LICENSE%%|<p>Please note that this package has a ${LICENSE} license.</p>|'
.else
SED_LICENSE_EXPR= -e 's|%%LICENSE%%||'
.endif
# set up the "more info URL" information as a sed expression
.ifdef HOMEPAGE
SED_HOMEPAGE_EXPR= -e 's|%%HOMEPAGE%%|<p>This package has a home page at <a HREF="${HOMEPAGE}">${HOMEPAGE}</a>.</p>|'
.else
SED_HOMEPAGE_EXPR= -e 's|%%HOMEPAGE%%||'
.endif
show-vulnerabilities:
@if [ -f ${DISTDIR}/vulnerabilities ]; then \
${AWK} '/^${PKGBASE}/ { print $$0 }' ${DISTDIR}/vulnerabilities; \
else \
${ECHO} "No vulnerabilities list found."; \
fi
show-vulnerabilities-html:
@if [ -f ${DISTDIR}/vulnerabilities ]; then \
${AWK} '/^${PKGBASE}/ { gsub("\<", "\\&lt;", $$1); \
gsub("\>", "\\&gt;", $$1); \
printf("<STRONG><LI>%s has a %s exploit (see <a href=\"%s\">%s</a> for more details)</STRONG>\n", $$1, $$2, $$3, $$3) }' \
${DISTDIR}/vulnerabilities; \
fi
.PHONY: README.html
README.html: .PRECIOUS
@${MAKE} ${MAKEFLAGS} build-depends-list PACKAGE_NAME_TYPE=html | ${SORT} -u >> $@.tmp1
@[ -s $@.tmp1 ] || ${ECHO} "<I>(none)</I>" >> $@.tmp1
@${MAKE} ${MAKEFLAGS} run-depends-list PACKAGE_NAME_TYPE=html | ${SORT} -u >> $@.tmp2
@[ -s $@.tmp2 ] || ${ECHO} "<I>(none)</I>" >> $@.tmp2
@${MAKE} ${MAKEFLAGS} binpkg-list >> $@.tmp4
@[ -s $@.tmp4 ] || ${ECHO} "<TR><TD><I>(no precompiled binaries available)</I>" >> $@.tmp4
@${MAKE} ${MAKEFLAGS} show-vulnerabilities-html >> $@.tmp5
@[ -s $@.tmp5 ] || ${ECHO} "<I>(no vulnerabilities known)</I>" >> $@.tmp5
@${LS} -l ${DISTDIR}/vulnerabilities 2>&1 | ${AWK} 'NF > 7 { printf("at %s %s %s\n", $$6, $$7, $$8) }' >> $@.tmp6
@[ -s $@.tmp6 ] || ${ECHO} "<TR><TD><I>(no vulnerabilities list available)</I>" >> $@.tmp6
@${SED} -e 's|%%PORT%%|${PKGPATH}|g' \
-e 's|%%PKG%%|${PKGNAME}|' \
${SED_LICENSE_EXPR} \
${SED_HOMEPAGE_EXPR} \
-e '/%%VULNERABILITIES%%/r $@.tmp5' \
-e '/%%VULNERABILITIES%%/d' \
-e '/%%VULDATE%%/r $@.tmp6' \
-e '/%%VULDATE%%/d' \
-e "s/%%COMMENT%%/${COMMENT:S|/|\/|g:Q}/" \
-e '/%%BUILD_DEPENDS%%/r $@.tmp1' \
-e '/%%BUILD_DEPENDS%%/d' \
-e '/%%RUN_DEPENDS%%/r $@.tmp2' \
-e '/%%RUN_DEPENDS%%/d' \
-e '/%%BIN_PKGS%%/r $@.tmp4' \
-e '/%%BIN_PKGS%%/d' \
${README_NAME} >> $@.tmp
@${CMP} -s $@.tmp $@ || \
{ ${ECHO_MSG} "${_PKGSRC_IN}> Creating README.html for ${_THISDIR_}${PKGNAME}"; \
${MV} -f $@.tmp $@; }
@${RM} -f $@.tmp $@.tmp1 $@.tmp2 $@.tmp4 $@.tmp5 $@.tmp6
.if !target(show-pkgtools-version)
show-pkgtools-version:
@${ECHO} ${PKGTOOLS_VERSION}
.endif
# convenience target, to display make variables from command line
# i.e. "make show-var VARNAME=var", will print var's value
show-var:
@${ECHO} ${${VARNAME}:Q}
.if !target(print-build-depends-list)
print-build-depends-list:
. if defined(BUILD_DEPENDS) || defined(DEPENDS)
@${ECHO} -n 'This package requires package(s) "'
@${ECHO} -n `${MAKE} ${MAKEFLAGS} build-depends-list | ${SORT} -u`
@${ECHO} '" to build.'
. endif
.endif
.if !target(print-run-depends-list)
print-run-depends-list:
. if defined(DEPENDS)
@${ECHO} -n 'This package requires package(s) "'
@${ECHO} -n `${MAKE} ${MAKEFLAGS} run-depends-list | ${SORT} -u`
@${ECHO} '" to run.'
. endif
.endif
.if !target(show-license)
show-license show-licence:
@if [ "${LICENSE}" != "" ]; then \
if [ -e ${PKGSRCDIR}/licenses/${LICENSE} ]; then \
${CAT} ${PKGSRCDIR}/licenses/${LICENSE}; \
else \
${ECHO} "Generic ${LICENSE} information not available"; \
${ECHO} "See the package description (pkg_info -d ${PKGNAME}) for more information."; \
fi \
fi
.endif
# Stat all the files of one pkg and sum the sizes up.
#
# XXX This is intended to be run before pkg_create is called, so the
# existence of ${PLIST} can be assumed.
print-pkg-size-this:
@${SHCOMMENT} "This pkg's files" ; \
${AWK} 'BEGIN { base = "${PREFIX}/" } \
/^@cwd/ { base = $$2 "/" } \
/^@ignore/ { next } \
NF == 1 { print base $$1 }' \
<${PLIST} \
| ${SORT} -u \
| ${SED} -e 's, ,\\ ,g' \
| ${XARGS} ${LS} -ld \
| ${AWK} 'BEGIN { print("0 "); } \
{ print($$5, " + "); } \
END { print("p"); }' \
| ${DC}
# Sizes of required pkgs (only)
#
# XXX This is intended to be run before pkg_create is called, so the
# dependencies are all installed.
print-pkg-size-depends:
@${MAKE} ${MAKEFLAGS} run-depends-list PACKAGE_DEPENDS_QUICK=true \
| ${XARGS} -n 1 ${SETENV} ${PKG_INFO} -e \
| ${SORT} -u \
| ${XARGS} -n 256 ${SETENV} ${PKG_INFO} -qs \
| ${AWK} -- 'BEGIN { print("0 "); } \
/^[0-9]+$$/ { print($$1, " + "); } \
END { print("p"); }' \
| ${DC}
###
### Automatic PLIST generation
### - files & symlinks first
### - @exec/@unexec calls are added for info files
### - @dirrm statements last
### - empty directories are handled properly
### - dirs from mtree files are excluded
###
### Usage:
### - make install
### - make print-PLIST | brain >pkg/PLIST
###
# Common (system) directories not to generate @dirrm statements for
# Reads MTREE_FILE and extracts a list of sed commands that will
# sort out which directories NOT to include into the PLIST @dirrm list
.if make(print-PLIST)
COMMON_DIRS!= ${AWK} 'BEGIN { \
i=0; \
stack[i]="${PREFIX}" ; \
cwd=""; \
} \
! ( /^\// || /^\#/ || /^$$/ ) { \
if ( $$1 == ".." ){ \
i=i-1; \
cwd = stack[i]; \
} else if ( $$1 == "." ){ \
} else { \
stack[i] = cwd ; \
if ( i == 0 ){ \
cwd = $$1 ; \
} else { \
cwd = cwd "\\\\/" $$1 ; \
} \
print "-e \"/^" cwd "$$$$/d\""; \
i=i+1 ; \
} \
} \
' <${MTREE_FILE}
.endif
# scan $PREFIX for any files/dirs modified since the package was extracted
# will emit "@exec mkdir"-statements for empty directories
# XXX will fail for data files that were copied using tar (e.g. emacs)!
# XXX should check $LOCALBASE and $X11BASE, and add @cwd statements
.if !target(print-PLIST)
print-PLIST:
${_PKG_SILENT}${_PKG_DEBUG}\
${ECHO} '@comment $$'NetBSD'$$'
${_PKG_SILENT}${_PKG_DEBUG}\
shlib_type=`${MAKE} ${MAKEFLAGS} show-shlib-type`; \
case $$shlib_type in \
"a.out") genlinks=1 ;; \
*) genlinks=0 ;; \
esac; \
${FIND} ${PREFIX}/. -newer ${EXTRACT_COOKIE} \! -type d \
| ${SED} \
-e 's@${PREFIX}/./@@' \
-e 's@${OPSYS}@\$${OPSYS}@' \
-e 's@${OS_VERSION:S/./\./}@\$${OS_VERSION}@' \
-e 's@${MACHINE_ARCH}@\$${MACHINE_ARCH}@' \
-e 's@${MACHINE_GNU_ARCH}@\$${MACHINE_GNU_ARCH}@' \
-e 's@${MACHINE_GNU_PLATFORM}@\$${MACHINE_GNU_PLATFORM}@' \
-e 's@${LOWER_VENDOR}@\$${LOWER_VENDOR}@' \
-e 's@${LOWER_OPSYS}@\$${LOWER_OPSYS}@' \
-e 's@${PKGNAME}@\$${PKGNAME}@' \
| ( ${GREP} -v emul/linux/proc || ${TRUE} ) \
| ${SORT} \
| ${AWK} ' \
/^@/ { print $$0; next } \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+\.[0-9]+$$/ { \
print $$0; \
sub("\.[0-9]+$$", ""); \
if ('$$genlinks') print $$0; \
sub("\.[0-9]+$$", ""); \
if ('$$genlinks') print $$0; \
sub("\.[0-9]+$$", ""); \
if ('$$genlinks') print $$0; \
next; \
} \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+$$/ { \
print $$0; \
sub("\.[0-9]+$$", ""); \
if ('$$genlinks') print $$0; \
sub("\.[0-9]+$$", ""); \
if ('$$genlinks') print $$0; \
next; \
} \
{ \
if (/\.info$$/) { \
print "\@unexec install-info --delete --info-dir=%D/info %D/" $$0; \
print $$0; \
print "\@exec install-info --info-dir=%D/info %D/" $$0; \
} else if (!/^info\/dir$$/) { \
print $$0; \
} \
}'
${_PKG_SILENT}${_PKG_DEBUG}\
for i in `${FIND} ${PREFIX}/. -newer ${EXTRACT_COOKIE} -type d \
| ${SED} \
-e s@${PREFIX}/./@@ \
-e '/^${PREFIX:S/\//\\\//g}\/.$$/d' \
| ${SORT} -r | ${SED} ${COMMON_DIRS}` ; \
do \
if [ `${LS} -la ${PREFIX}/$$i | ${WC} -l` = 3 ]; then \
${ECHO} @exec ${MKDIR} ${PREFIX}/$$i ; \
fi ; \
${ECHO} @dirrm $$i ; \
done \
| ${SED} \
-e s@${OPSYS}@\$${OPSYS}@ \
-e s@${OS_VERSION}@\$${OS_VERSION}@ \
-e s@${MACHINE_ARCH}@\$${MACHINE_ARCH}@ \
-e s@${MACHINE_GNU_ARCH}@\$${MACHINE_GNU_ARCH}@ \
-e s@${MACHINE_GNU_PLATFORM}@\$${MACHINE_GNU_PLATFORM}@ \
-e s@${LOWER_VENDOR}@\$${LOWER_VENDOR}@ \
-e s@${LOWER_OPSYS}@\$${LOWER_OPSYS}@ \
-e s@${PKGNAME}@\$${PKGNAME}@ \
| ${GREP} -v emul/linux/proc || ${TRUE}
.endif # target(print-PLIST)
# Fake installation of package so that user can pkg_delete it later.
# Also, make sure that an installed package is recognized correctly in
# accordance to the @pkgdep directive in the packing lists
.if !target(fake-pkg)
fake-pkg: ${PLIST} ${DESCR} ${MESSAGE}
${_PKG_SILENT}${_PKG_DEBUG}\
if [ ! -f ${PLIST} -o ! -f ${DESCR} ]; then \
${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; \
exit 1; \
fi
${_PKG_SILENT}${_PKG_DEBUG}\
if [ ! -d ${PKG_DBDIR} ]; then \
${RM} -f ${PKG_DBDIR}; \
${MKDIR} ${PKG_DBDIR}; \
fi
. if defined(FORCE_PKG_REGISTER)
${_PKG_SILENT}${_PKG_DEBUG}${PKG_DELETE} -O ${PKGNAME}
${_PKG_SILENT}${_PKG_DEBUG}${RM} -rf ${PKG_DBDIR}/${PKGNAME}
. endif
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${BUILD_VERSION_FILE} ${BUILD_INFO_FILE}
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${SIZE_PKG_FILE} ${SIZE_ALL_FILE}
${_PKG_SILENT}${_PKG_DEBUG}\
files=""; \
for f in ${.CURDIR}/Makefile ${FILESDIR}/* ${PKGDIR}/*; do \
if [ -f $$f ]; then \
files="$$files $$f"; \
fi; \
done; \
if [ -f ${DISTINFO_FILE} ]; then \
for f in `${AWK} 'NF == 4 && $$3 == "=" { gsub("[()]", "", $$2); print $$2 }' < ${DISTINFO_FILE}`; do \
if [ -f ${PATCHDIR}/$$f ]; then \
files="$$files ${PATCHDIR}/$$f"; \
fi; \
done; \
fi; \
if [ -d ${PATCHDIR} ]; then \
for f in ${PATCHDIR}/patch-*; do \
case $$f in \
*.orig|*.rej|*~) ;; \
${PATCHDIR}/patch-local-*) \
files="$$files $$f" ;; \
esac; \
done; \
fi; \
${GREP} '\$$NetBSD' $$files | ${SED} -e 's|^${PKGSRCDIR}/||' > ${BUILD_VERSION_FILE};
. for def in ${BUILD_DEFS}
@${ECHO} ${def}= ${${def}:Q} | ${SED} -e 's|^PATH=[^ ]*|PATH=...|' >> ${BUILD_INFO_FILE}
. endfor
@if ${CC} --version >/dev/null 2>&1; then \
${ECHO} "CC= ${CC}-`${CC} --version`" >> ${BUILD_INFO_FILE}; \
fi
. ifdef USE_PERL5
@${ECHO} "PERL= `${PERL5} --version 2>/dev/null | ${GREP} 'This is perl'`" >> ${BUILD_INFO_FILE}
. endif
. ifdef USE_GMAKE
@${ECHO} "GMAKE= `${GMAKE} --version | ${GREP} version`" >> ${BUILD_INFO_FILE}
. endif
${_PKG_SILENT}${_PKG_DEBUG} \
${ECHO} "_PKGTOOLS_VER=${PKGTOOLS_VERSION}" >> ${BUILD_INFO_FILE}
${_PKG_SILENT}${_PKG_DEBUG} \
size_this=`${MAKE} ${MAKEFLAGS} print-pkg-size-this`; \
size_depends=`${MAKE} ${MAKEFLAGS} print-pkg-size-depends`; \
${ECHO} $$size_this >${SIZE_PKG_FILE}; \
${ECHO} $$size_this $$size_depends + p | ${DC} >${SIZE_ALL_FILE}
${_PKG_SILENT}${_PKG_DEBUG} \
if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Registering installation for ${PKGNAME}"; \
${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \
${PKG_CREATE} ${PKG_ARGS_INSTALL} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \
${ECHO} ${COMMENT:Q} > ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \
${CP} ${BUILD_VERSION_FILE} ${PKG_DBDIR}/${PKGNAME}/+BUILD_VERSION; \
${CP} ${BUILD_INFO_FILE} ${PKG_DBDIR}/${PKGNAME}/+BUILD_INFO; \
if ${TEST} -e ${SIZE_PKG_FILE}; then \
${CP} ${SIZE_PKG_FILE} ${PKG_DBDIR}/${PKGNAME}/+SIZE_PKG; \
fi ; \
if ${TEST} -e ${SIZE_ALL_FILE}; then \
${CP} ${SIZE_ALL_FILE} ${PKG_DBDIR}/${PKGNAME}/+SIZE_ALL; \
fi ; \
if [ -n "${INSTALL_FILE}" ]; then \
if ${TEST} -e ${INSTALL_FILE}; then \
${CP} ${INSTALL_FILE} ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \
fi; \
fi; \
if [ -n "${DEINSTALL_FILE}" ]; then \
if ${TEST} -e ${DEINSTALL_FILE}; then \
${CP} ${DEINSTALL_FILE} ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \
fi; \
fi; \
if [ -n "${MESSAGE}" ]; then \
if ${TEST} -e ${MESSAGE}; then \
${CP} ${MESSAGE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \
fi; \
fi; \
list="`${MAKE} ${MAKEFLAGS} run-depends-list PACKAGE_DEPENDS_QUICK=true ECHO_MSG=${TRUE} | ${SORT} -u`" ; \
for dep in $$list; do \
realdep="`${PKG_INFO} -e \"$$dep\" || ${TRUE}`" ; \
if [ `${ECHO} $$realdep | ${WC} -w` -gt 1 ]; then \
${ECHO} '***' "WARNING: '$$dep' expands to several installed packages " ; \
${ECHO} " (" `${ECHO} $$realdep` ")." ; \
${ECHO} " Please check if this is really intended!" ; \
continue ; \
fi ; \
done ; \
for realdep in `${ECHO} $$list | ${XARGS} -n 1 ${SETENV} ${PKG_INFO} -e | ${SORT} -u`; do \
if ${TEST} -z "$$realdep"; then \
${ECHO} "$$dep not installed - dependency NOT registered" ; \
elif [ -d ${PKG_DBDIR}/$$realdep ]; then \
if ${TEST} ! -e ${PKG_DBDIR}/$$realdep/+REQUIRED_BY; then \
${TOUCH} ${PKG_DBDIR}/$$realdep/+REQUIRED_BY; \
fi; \
${AWK} 'BEGIN { found = 0; } \
$$0 == "${PKGNAME}" { found = 1; } \
{ print $$0; } \
END { if (!found) { printf("%s\n", "${PKGNAME}"); }}' \
< ${PKG_DBDIR}/$$realdep/+REQUIRED_BY > ${PKG_DBDIR}/$$realdep/reqby.$$$$; \
${MV} ${PKG_DBDIR}/$$realdep/reqby.$$$$ ${PKG_DBDIR}/$$realdep/+REQUIRED_BY; \
${ECHO} "${PKGNAME} requires installed package $$realdep"; \
fi; \
done; \
fi
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -f ${DISTDIR}/vulnerabilities ]; then \
allvul="`${AWK} '/#.*/ { next } NF > 0 { cmd = sprintf(\"${PKG_INFO} -e \\\"%s\\\"\", $$1); system(cmd) }' ${DISTDIR}/vulnerabilities`"; \
for vul in "" $$allvul; do \
if [ "X$$vul" = "X" ]; then continue; fi; \
if [ "$$vul" = "${PKGNAME}" ]; then \
${ECHO_MSG} '*** WARNING: This package (${PKGNAME}) has a security vulnerability ***'; \
${ECHO_MSG} "`${MAKE} show-vulnerabilities`"; \
${ECHO_MSG} '*** WARNING: You are strongly advised to deinstall ${PKGNAME} now ***'; \
fi; \
done; \
fi
.endif
# Depend is generally meaningless for arbitrary packages, but if someone wants
# one they can override this. This is just to catch people who've gotten into
# the habit of typing `${MAKE} depend all install' as a matter of course.
#
.if !target(depend)
depend:
.endif
# Same goes for tags
.if !target(tags)
tags:
.endif
# if automatic manual page compression is done by the package according
# to MANZ's value, set MANCOMPRESSED if MANZ is set
.if defined(MANCOMPRESSED_IF_MANZ) && defined(MANZ)
MANCOMPRESSED= yes
MAKE_ENV+= MANZ="${MANZ}"
.endif
# generate ${PLIST} from ${PLIST_SRC} by:
# - fixing list of man-pages according to MANCOMPRESSED/MANZ
# (we don't take any notice of MANCOMPRESSED as many packages have .gz
# pages in PLIST even when they install manpages without compressing them)
# - substituting by ${PLIST_SUBST}
# - adding files and appropriate rmdir statements for perl5 modules if
# PERL5_PACKLIST is defined
# - adding symlinks for shared libs (ELF) or ldconfig calls (a.out).
.if ${OPSYS} == "NetBSD"
IMAKE_MAN_CMD=
. ifdef MANZ
MANZ_EXPRESSION= -e 's|\(^\([^@/]*/\)*man/\([^/]*/\)\{0,1\}man[1-9ln]/.*[1-9ln]$$\)|\1.gz|' \
-e 's|\(^\([^@/]*/\)*man/\([^/]*/\)\{0,1\}cat[1-9ln]/.*0$$\)|\1.gz|'
. else
MANZ_EXPRESSION= -e 's|\(^\([^@/]*/\)*man/\([^/]*/\)\{0,1\}man[1-9ln]/.*[1-9ln]\)\.gz$$|\1|' \
-e 's|\(^\([^@/]*/\)*man/\([^/]*/\)\{0,1\}cat[1-9ln]/.*0\)\.gz$$|\1|'
. endif # MANZ
MANZ_NAWK_CMD=
.elif ${OPSYS} == "SunOS"
. ifdef USE_IMAKE
IMAKE_MAN_CMD= ${AWK} '/^([^\/]*\/)*man\/([^\/]*\/)?cat[1-9ln]\/.*0(\.gz)?$$/ { \
sect = $$0; n = match(sect, "/cat[1-9ln]"); \
sect = sprintf(".%s", substr(sect, n + 4, 1)); \
s = $$0; sub("/cat", "/man", s); sub("\.0(\.gz)?$$", sect, s); \
if (match($$0, "\.gz$$") > 0) { ext = ".gz";} else { ext = "";} \
$$0 = sprintf("%s%s", s, ext); \
} { print $$0; }' |
. else
IMAKE_MAN_CMD=
. endif # USE_IMAKE
. ifdef MANZ
MANZ_NAWK_CMD= ${AWK} '/^([^\/]*\/)*man\/([^\/]*\/)?man[1-9ln]\/.*[1-9ln]\.gz$$/ { \
$$0 = sprintf("%s.gz", $$0); \
} \
/^([^\/]*\/)*man\/([^\/]*\/)?cat[1-9ln]\/.*0\.gz$$/ { \
$$0 = sprintf("%s.gz", $$0); \
} \
{ print $$0; }' |
. else
MANZ_NAWK_CMD= ${AWK} '/^([^\/]*\/)*man\/([^\/]*\/)?man[1-9ln]\/.*[1-9ln]\.gz$$/ { \
$$0 = substr($$0, 1, length($$0) - 3); \
} \
/^([^\/]*\/)*man\/([^\/]*\/)?cat[1-9ln]\/.*0\.gz$$/ { \
$$0 = substr($$0, 1, length($$0) - 3); \
} \
{ print $$0; }' |
. endif # MANZ
MANZ_EXPRESSION=
.endif # SunOS
.if defined(PERL5_PACKLIST)
PERL5_COMMENT= ( ${ECHO} "@comment The following lines are automatically generated"; \
${ECHO} "@comment from the installed .packlist files." )
PERL5_PACKLIST_FILES= ( ${CAT} ${PERL5_PACKLIST}; for f in ${PERL5_PACKLIST}; do [ ! -f $$f ] || ${ECHO} $$f; done ) \
| ${SED} -e "s,[ ].*,," -e "s,/\./,/,g" -e "s,${PREFIX}/,," \
| ${SORT} -u
PERL5_PACKLIST_DIRS= ( ${CAT} ${PERL5_PACKLIST}; for f in ${PERL5_PACKLIST}; do [ ! -f $$f ] || ${ECHO} $$f; done ) \
| ${SED} -e "s,[ ].*,," -e "s,/\./,/,g" -e "s,${PREFIX}/,," \
-e "s,^,@unexec ${RMDIR} -p %D/," \
-e "s,/[^/]*$$, 2>/dev/null || true," \
| ${SORT} -ur
PERL5_GENERATE_PLIST= ${PERL5_COMMENT}; \
${PERL5_PACKLIST_FILES}; \
${PERL5_PACKLIST_DIRS}
.else
PERL5_GENERATE_PLIST= ${TRUE}
.endif
message: ${MESSAGE}
.ifdef MESSAGE
${MESSAGE}: ${MESSAGE_SRC}
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -z "${MESSAGE_SRC}" ]; then \
${ECHO} "${MESSAGE_SRC} not found."; \
${ECHO} "Please set MESSAGE_SRC correctly."; \
else \
${SED} ${MESSAGE_SUBST:S/=/}!/:S/$/!g/:S/^/ -e s!\\\${/}\
${MESSAGE_SRC} > ${MESSAGE}; \
fi
.endif
plist: ${PLIST}
${PLIST}: ${PLIST_SRC}
${_PKG_SILENT}${_PKG_DEBUG} \
{ ${CAT} ${PLIST_SRC}; \
${PERL5_GENERATE_PLIST}; } | \
${MANZ_NAWK_CMD} \
${IMAKE_MAN_CMD} \
${SED} ${MANZ_EXPRESSION} \
${PLIST_SUBST:S/=/}!/:S/$/!g/:S/^/ -e s!\\\${/} \
> ${PLIST}; \
${MAKE} ${MAKEFLAGS} do-shlib-handling \
SHLIB_PLIST_MODE=1 ; \
# generate ${DESCR} from ${DESCR_SRC} by:
# - Appending the homepage URL, if any
descr: ${DESCR}
${DESCR}: ${DESCR_SRC}
@${CAT} ${DESCR_SRC} >${DESCR}
.if defined(HOMEPAGE)
@\
${ECHO} >>${DESCR} ; \
${ECHO} "Homepage:" >>${DESCR} ; \
${ECHO} '${HOMEPAGE}' >>${DESCR}
.endif
#
# For bulk build targets (bulk-install, bulk-package), the
# BATCH variable must be set in /etc/mk.conf:
#
.if defined(BATCH)
. include "../../mk/bulk/bsd.bulk-pkg.mk"
.endif
Reference in a new issue View git blame Copy permalink