003.013.001.000 Changelog
E320: Fix front panel GPIO readback
E320: Fix master_clock_rate setting
E320: Print extra ouptut for ref_clock BIST
E320: Fix gps_locked type
E320: Fix return value of get_fpga_type()
N3xx: Enable setting clock and time sources at runtime
N3xx: Add ref_clock BIST
N3xx: Improve set_time_source() and set_clock_source()
N3xx: Add exception for init failure
N3xx: Remove HA, XA images packages
N3xx: Change init() procedure to reduce configuration time
N310: Add frequency bounds
N310: Fix RX antenna mapping
N310: Add log messages when re-initializing dboards
N310: Add skip_rfic argument to reduce time of BIST
N310: Add initialization of TX bandwidth
E310: Fix initialization of antenna and frequency values
E310: Type-cast fix for Boost
X300: Improve firmware compat error message
X300: Updated niusrprio driver
X300: Add recovery for duplicate IP addresses in EEPROM
X300: Prevent duplicate MAC and IP addresses from being programmed
X300: New mode to configure master clock rate
X300: Implement RFNoC get antenna functions
B2xx: Fix values of MASK_GPIO_SHDN_SW and GPIO_AUX_PWR_ON in firmware
B2xx: Revert changes to DSP core to fix scaling factor adjustment
B2xx: Restore asynchronous reset of AD936x
(fixes LIBUSB_TRANSFER_OVERFLOW and unexpected sid errors)
TwinRX: enable ch1 lo amps if ch2 is using an external lo source
TwinRX: Correctly initialize antenna mapping on X300
TwinRX: Revise ADF5356 frac2 register calculation to prevent drifting spurs
TwinRX: Fix initialization
TwinRX: Tuning improvements
TwinRX: Enable phase resync on ADF535x
TwinRX: Make routing to LO1 and LO2 mutually exclusive
BasicRX/LFRX: Fix real mode in rx_frontend_core_3000
UHD: Define UHD_API as empty string when building static lib
UHD: Changed to 'all_matching' endpoint resolution for udp_simple transport
UHD: Add support for NEON SIMD
UHD: Fix usb_dummy_impl compilation in MSVC
UHD: Reconcile time_spec operators with boost concepts
UHD: Fix rounding in ddc/duc rate calculation
UHD: Increase MPMD RPC timeout when calling set_time_source()
UHD: Fix RX streamer SOB and EOB handling
UHD: Add UHD_SAFE_CALL to block_ctrl_base destructor
UHD: Change SOVERSION to ABI string and VERSION to full UHD version
UHD: Update cmake style to use lower case commands
UHD: Add SOURCE_DATE_EPOCH
UHD: Improve logic for UHD_IMAGES_DIR
UHD: Add RUNTIME_PYTHON_EXECUTABLE
UHD: Fix return value of get_rolloff() for filters
UHD: Properly register devtest
UHD: Fix log statement for Port number on RFNoC block
UHD: Use "MATCHES" instead of "STREQUAL" for "Clang"
UHD: Fix GPGGA string formatting for gpsd
Device3: Set default block control response SIDs
Device3: Fix block control flushing
RFNoC: Improved flushing mechanism in noc_shell and dma_fifo
RFNoC: Install missing dma_fifo_block_ctrl header
RFNoC: Replace some [] with .at() in radio_ctrl_impl
RFNoC: Fix graph traversal
MPM: Add Git hash, version to device info
MPM: Reset the RPC server upon reload
MPM: TDC: Update PDAC BIST and flatness test to use latest APIs
MPM: Fix handling of 0-valued dt-compat
MPM: Fix GPSD sensor names for N3xx and E320
MPM: Add args to update_ref_clock_freq to properly support dynamic setting
of clock and time references
MPM: Fix Pylint warnings
MPM: Identify sysfs gpios more generically
MPM: Add lock_guard() function
MPM: Factor E320 and N3xx BIST code into common module
MPM: Add gpsd error handling
MPM: Add FPGA git hash to device info
MPMD: Increase RPC timeout during readng mb sensor
MPMD: Improve error message for compat number mismatches
Python API: Enable Python API on Windows
Python API: Change .dll to .pyd for Win32
Python API: Fixing Boost.Python initializer visibility
Python API: Fix duration of benchmark rate
Python API: Add missing constructors of time_spec_t
Python API: Expose streamer timeouts
Python API: Tighten the scope of releasing the GIL
Python API: Add device_addr_t
Python API: Populate the tune_result_t binding
Utils: Many fixes and enhancements for uhd_images_downloader
Utils: Update query_gpsdo_sensors to work on E310
Examples: Removed some legacy code patterns from RFNoC examples
Examples: Fix channel argument for rx_samples_to_file
Examples: Fix benchmark_rate MIMO synchronization
Examples: Add phase alignment example
Examples: Fix RX antenna not being applied in txrx_loopback_to_file
Test: Add more env vars, make Py3k compatible
Test: Add multi_usrp_test.py to devtest
Test: Clean up, refactor, and improve devtest
Test: Enable rx_samples_to_file in E320 devtest and N3xx devtest
Test: Reduce sample rate for E320 1G devtest
Test: Add unit test for eeprom_utils
Docs: Add clock_source and time_source to n3xx argument list and fix WR clock_source call
Docs: Minor tweaks to the Python API manual page
Docs: Add E320 test procedures
Docs: Added TwinRX page
Docs: Fix N210 MIMO Phase Alignment test command
Docs: Add E320 information
Docs: Improve sections on clock/time references
Docs: Add section on X300 motherboard clocking
Docs: Add more information on Salt for N3xx and E320
Docs: Adjust E310 functional verification tests
Docs: Add documentation on GIL release
Debian: Update control files
Images: Add N3xx CPLD file to manifest
5235557f43