pkgsrc/security/ccid/PLIST
pettai 5f712c6949 A major version bump gives a long changelog...
1.4.5:
    - Add support of Alcor Micro AU9540, Ubisys 13.56MHz RFID (CCID),
      BIFIT USB-Token iBank2key, BIFIT iBank2Key, Gemalto Ezio Shield
      PinPad reader, Gemalto SA .NET Dual, Precise Sense MC reader (with
      fingerprint), SDS DOMINO-Key TWIN Pro
    - Add support of bPPDUSupport and FEATURE_CCID_ESC_COMMAND
    - SCARD_ATTR_VENDOR_NAME and SCARD_ATTR_VENDOR_IFD_VERSION are not
      the vendor name and version of the driver but of the IFD:
      InterFace Device i.e. the smart card reader.  We then return the
      USB iManufacturer string as SCARD_ATTR_VENDOR_NAME and USB
      bcdDevice as SCARD_ATTR_VENDOR_IFD_VERSION
    - reduce binary size bu removing unused features from simclist
    - Fix some warnings reported bu Coverity

1.4.4:
    - Add support of Gemalto Ezio Shield, Gemalto Ezio CB+, Gemalto Ezio
      Shield Secure Channel, Gemalto Ezio Shield PinPad and Gemalto Ezio
      Generic
    - Activate USB automatic power suspend. The Linux kernel should
      power off the reader automatically if it is not used (pcscd is not
      running).
    - Add support of TLV Properties wLcdMaxCharacters and wLcdMaxLines.
      They just duplicate wLcdLayout
    - some minor bugs removed

1.4.3:
    - Add support of Neowave Weneo, Vasco DIGIPASS 920, SCM SCL011,
      Feitian ePass2003 readers
    - use :libudev: instead of :libhal: naming scheme.
    - Do not install RSA_SecurID_getpasswd and Kobil_mIDentity_switch
      and the associated documentation.
    - the Secure Pin Entry of the HP USB Smart Card Keyboard is bogus so
      disable it
    - some minor bugs removed

1.4.2:
    - Add support of Feitian SCR310 reader (also known as 301v2), ACS
      APG8201 PINhandy 1, Oberthur ID-ONE TOKEN SLIM v2, new Neowave
      Weneo token, Vasco DIGIPASS KEY 860, Vasco DIGIPASS KEY 200,
      Xiring Leo v2, Xiring MyLeo, Aktiv Rutoken lite readers
    - Add back support of "bogus" Oz776, REINER SCT and BLUDRIVE II
    - Ease detection of OpenCT by pcsc-lite
    - disable use of interrupt card events for multi slots readers (the
      algorithm is bogus and can't be used)
    - fix minor problems detected by the clang tool
    - some minor bugs removed

1.4.1:
    - Add support of Gemalto Smart Guardian (SG CCID), ReinerSCT
      cyberJack RFID basis, Akasa AK-CR-03, BZH uKeyCI800-K18, Free
      Software Initiative of Japan Gnuk token readers
    - Remove O2 Micro Oz776 and Blutronics Bludrive II CCID since they
      are no more supported since version 1.4.0
    - SecurePINVerify() & SecurePINModify(): Accept big and little
      endian byte orders for multibytes fields. The application
      should not use HOST_TO_CCID_16() and HOST_TO_CCID_32() any more
      and just use the normal byte order of the architecture.
    - Need pcsc-lite 1.6.5 for TAG_IFD_POLLING_THREAD_WITH_TIMEOUT
    - Add --enable-embedded (default is no) to build libccid for an
      embedded system.  This will activate the NO_LOG option to disable
      logging and limit RAM and disk consumption.
    - Remove --enable-udev option since it is not used anymore with
      libhal. The udev rules file is now used to change the access
      rights of the device and not send a hotplug signal to pcscd.
      See http://ludovicrousseau.blogspot.com/2010/09/pcscd-auto-start.html
    - some minor bugs removed

1.4.0:
    - add support of Kingtrust Multi-Reader, Dectel CI692, Todos CX00,
      C3PO LTC36, ACS AET65, Broadcom 5880, Tianyu Smart Card Reader,
      Gemalto Hybrid Smartcard Reader
    - Add support of the SCM SDI 010 again. At least the contact
      interface can be used.
    - Use libusb-1.0 instead of libusb-0.1
    - add support of TAG_IFD_STOP_POLLING_THREAD and use of the
      asynchronous libusb API to be able to stop a transfer.
    - Request pcsc-lite 1.6.2 minimum (instead of 1.6.0) to have
      TAG_IFD_STOP_POLLING_THREAD defined
    - The O2MICRO OZ776 patch (for OZ776, OZ776_7772, REINER_SCT and
      BLUDRIVEII_CCID) is no more supported with libusb-1.0
    - correctly get the IFSC from the ATR (ATR parsing was not always
      correct)
    - some minor bugs removed
2012-12-15 00:29:31 +00:00

9 lines
380 B
Text

@comment $NetBSD: PLIST,v 1.5 2012/12/15 00:29:31 pettai Exp $
bin/RSA_SecurID_getpasswd
man/man1/RSA_SecurID_getpasswd.1
man/man8/Kobil_mIDentity_switch.8
lib/pcsc-lite/drivers/ifd-ccid.bundle/Contents/Info.plist
lib/pcsc-lite/drivers/ifd-ccid.bundle/Contents/${OPSYS}/libccid.so
sbin/Kobil_mIDentity_switch
share/doc/ccid/README_Kobil_mIDentity_switch.txt
share/doc/ccid/README