kpriv/pkgsrc
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
pkgsrc/mk/bsd.pkg.install.mk
jlam dffc19378a Reorganize some of the files under pkgsrc/mk: 
(1) defs.${OPSYS}.mk --> platform/${OPSYS}.mk.

The "platform" subdirectory is where all of the ${OPSYS}-specific
infrastructure logic should reside.

    (2) bsd.pkg.defaults.mk --> defaults/mk.conf
        bsd.pkg.obsolete.mk --> defaults/obsolete.mk

Renaming bsd.pkg.defaults.mk to defaults/mk.conf is to mimic the way
that NetBSD has /etc/rc.conf as well as /etc/defaults/rc.conf, where
the latter is a full list of user-settable variables, and the two
files share the same name to reinforce the fact /etc/defaults/rc.conf
can be directly copied in place as /etc/rc.conf.  This is the same
relationship shared by defaults/mk.conf and /etc/mk.conf.
2004-10-06 20:51:47 +00:00

381 lines
14 KiB
Makefile
Raw Blame History

# $NetBSD: bsd.pkg.install.mk,v 1.63 2004/10/06 20:51:47 jlam Exp $
#
# This Makefile fragment is included by bsd.pkg.mk to use the common
# INSTALL/DEINSTALL scripts. To use this Makefile fragment, simply:
#
# (1) Set the variables to customize the install scripts to the package, and
# (2) Set USE_PKGINSTALL to YES in the package Makefile.
#
# NOTE: This file must _not_ be included from anything else than bsd.pkg.mk.
.if !defined(BSD_PKG_INSTALL_MK)
BSD_PKG_INSTALL_MK= 1
.include "../../mk/bsd.prefs.mk"
DEINSTALL_FILE= ${WRKDIR}/.DEINSTALL
INSTALL_FILE= ${WRKDIR}/.INSTALL
# These are the template scripts for the INSTALL/DEINSTALL scripts. Packages
# may do additional work in the INSTALL/DEINSTALL scripts by overriding the
# variables DEINSTALL_EXTRA_TMPL and INSTALL_EXTRA_TMPL to point to
# additional script fragments. These bits are included after the main
# install/deinstall script fragments. Packages may also override the
# variables DEINSTALL_TMPL and INSTALL_TMPL to completely customize the
# install/deinstall logic.
#
_HEADER_TMPL?= ${.CURDIR}/../../mk/install/header
.if !defined(HEADER_EXTRA_TMPL) && exists(${.CURDIR}/HEADER)
HEADER_EXTRA_TMPL?= ${.CURDIR}/HEADER
.else
HEADER_EXTRA_TMPL?= # empty
.endif
DEINSTALL_PRE_TMPL?= ${.CURDIR}/../../mk/install/deinstall-pre
DEINSTALL_EXTRA_TMPL?= # empty
DEINSTALL_TMPL?= ${.CURDIR}/../../mk/install/deinstall
INSTALL_TMPL?= ${.CURDIR}/../../mk/install/install
INSTALL_EXTRA_TMPL?= # empty
INSTALL_POST_TMPL?= ${.CURDIR}/../../mk/install/install-post
_FOOTER_TMPL?= ${.CURDIR}/../../mk/install/footer
# DEINSTALL_TEMPLATES and INSTALL_TEMPLATES are the default list of source
# files that are concatenated to form the DEINSTALL/INSTALL scripts.
#
DEINSTALL_TEMPLATES= ${_HEADER_TMPL}
DEINSTALL_TEMPLATES+= ${HEADER_EXTRA_TMPL}
DEINSTALL_TEMPLATES+= ${DEINSTALL_PRE_TMPL}
DEINSTALL_TEMPLATES+= ${DEINSTALL_EXTRA_TMPL}
DEINSTALL_TEMPLATES+= ${DEINSTALL_TMPL}
DEINSTALL_TEMPLATES+= ${_FOOTER_TMPL}
INSTALL_TEMPLATES= ${_HEADER_TMPL}
INSTALL_TEMPLATES+= ${HEADER_EXTRA_TMPL}
INSTALL_TEMPLATES+= ${INSTALL_TMPL}
INSTALL_TEMPLATES+= ${INSTALL_EXTRA_TMPL}
INSTALL_TEMPLATES+= ${INSTALL_POST_TMPL}
INSTALL_TEMPLATES+= ${_FOOTER_TMPL}
# These are the list of source files that are concatenated to form the
# INSTALL/DEINSTALL scripts.
#
DEINSTALL_SRC?= ${DEINSTALL_TEMPLATES}
INSTALL_SRC?= ${INSTALL_TEMPLATES}
# FILES_SUBST lists what to substitute in DEINSTALL/INSTALL scripts and in
# rc.d scripts.
#
FILES_SUBST+= PREFIX=${PREFIX}
FILES_SUBST+= LOCALBASE=${LOCALBASE}
FILES_SUBST+= X11BASE=${X11BASE}
FILES_SUBST+= DEPOTBASE=${DEPOTBASE}
FILES_SUBST+= VARBASE=${VARBASE}
FILES_SUBST+= PKG_SYSCONFBASE=${PKG_SYSCONFBASE}
FILES_SUBST+= PKG_SYSCONFDEPOTBASE=${PKG_SYSCONFDEPOTBASE}
FILES_SUBST+= PKG_SYSCONFBASEDIR=${PKG_SYSCONFBASEDIR}
FILES_SUBST+= PKG_SYSCONFDIR=${PKG_SYSCONFDIR}
FILES_SUBST+= CONF_DEPENDS=${CONF_DEPENDS:C/:.*//:Q}
FILES_SUBST+= PKGBASE=${PKGBASE}
FILES_SUBST+= PKG_INSTALLATION_TYPE=${PKG_INSTALLATION_TYPE}
# PKG_USERS represents the users to create for the package. It is a
# space-separated list of elements of the form
#
# user:group[:[userid][:[descr][:[home][:shell]]]]
#
# Only the user and group are required; everything else is optional,
# but the colons must be in the right places when specifying optional
# bits. Note that if the description contains spaces, then spaces
# should be double backslash-escaped, e.g.
#
# foo:foogrp::The\\ Foomister
#
# PKG_GROUPS represents the groups to create for the package. It is a
# space-separated list of elements of the form
#
# group[:groupid]
#
# Only the group is required; the groupid is optional.
#
PKG_USERS?= # empty
_PKG_USER_HOME?= /nonexistent
_PKG_USER_SHELL?= ${NOLOGIN}
PKG_GROUPS?= # empty
FILES_SUBST+= PKG_USERS=${PKG_USERS:Q}
FILES_SUBST+= PKG_USER_HOME=${_PKG_USER_HOME}
FILES_SUBST+= PKG_USER_SHELL=${_PKG_USER_SHELL}
FILES_SUBST+= PKG_GROUPS=${PKG_GROUPS:Q}
# Interix is very Special in that users are groups cannot have the
# same name. Interix.mk tries to work around this by overriding
# some specific package defaults. If we get here and there's still a
# conflict, add a breakage indicator to make sure the package won't
# compile without changing something.
#
.if !empty(OPSYS:MInterix)
. for user in ${PKG_USERS}
. if !defined(BROKEN) && !empty(PKG_GROUPS:M${user:C/:.*//})
BROKEN:= "User and group '${user:C/:.*//}' cannot have the same name on Interix"
. endif
. endfor
.endif
.if !empty(PKG_USERS)
USE_USERADD= YES
.endif
.if !empty(PKG_GROUPS)
USE_GROUPADD= YES
.endif
# SPECIAL_PERMS are lists that look like:
# file user group mode
# At post-install time, file (it may be a directory) is changed to be
# owned by user:group with mode permissions.
#
# SPECIAL_PERMS should be used primarily to change permissions of files or
# directories listed in the PLIST. This may be used to make certain files
# set-uid or to change the ownership or a directory.
#
# SETUID_ROOT_PERMS is a convenience definition to note an executable is
# meant to be setuid-root, and should be used as follows:
#
# SPECIAL_PERMS+= /path/to/suidroot ${SETUID_ROOT_PERMS}
#
SPECIAL_PERMS?= # empty
SETUID_ROOT_PERMS?= ${ROOT_USER} ${ROOT_GROUP} 4711
FILES_SUBST+= SPECIAL_PERMS=${SPECIAL_PERMS:Q}
# CONF_FILES are pairs of example and true config files, used much like
# MLINKS in the base system. At post-install time, if the true config
# file doesn't exist, then the example one is copied into place. At
# deinstall time, the true one is removed if it doesn't differ from the
# example one. SUPPORT_FILES is used the same way, but the package
# admin isn't prompted to customize the file at post-install time.
#
# CONF_FILES_MODE and SUPPORT_FILES_MODE are the file permissions for the
# files in CONF_FILES and SUPPORT_FILES, respectively.
#
# CONF_FILES_PERMS are lists that look like:
# example_file config_file user group mode
# and works like CONF_FILES, except the config files are owned by
# user:group have mode permissions. SUPPORT_FILES_PERMS is used in the
# same way, but the package admin isn't prompted to customize the file
# at post-install time.
#
# RCD_SCRIPTS works lists the basenames of the rc.d scripts. They are
# expected to be found in ${RCD_SCRIPTS_EXAMPLEDIR}, and the scripts
# will be copied into ${RCD_SCRIPTS_DIR} with ${RCD_SCRIPTS_MODE}
# permissions.
#
CONF_FILES?= # empty
CONF_FILES_MODE?= 0644
CONF_FILES_PERMS?= # empty
SUPPORT_FILES?= # empty
SUPPORT_FILES_MODE?= 0644
SUPPORT_FILES_PERMS?= # empty
RCD_SCRIPTS?= # empty
RCD_SCRIPTS_MODE?= 0755
RCD_SCRIPTS_EXAMPLEDIR?= ${PREFIX}/etc/rc.d
RCD_SCRIPTS_SHELL?= ${SH}
FILES_SUBST+= CONF_FILES=${CONF_FILES:Q}
FILES_SUBST+= CONF_FILES_MODE=${CONF_FILES_MODE}
FILES_SUBST+= CONF_FILES_PERMS=${CONF_FILES_PERMS:Q}
FILES_SUBST+= SUPPORT_FILES=${SUPPORT_FILES:Q}
FILES_SUBST+= SUPPORT_FILES_MODE=${SUPPORT_FILES_MODE}
FILES_SUBST+= SUPPORT_FILES_PERMS=${SUPPORT_FILES_PERMS:Q}
FILES_SUBST+= RCD_SCRIPTS=${RCD_SCRIPTS:Q}
FILES_SUBST+= RCD_SCRIPTS_MODE=${RCD_SCRIPTS_MODE}
FILES_SUBST+= RCD_SCRIPTS_DIR=${RCD_SCRIPTS_DIR}
FILES_SUBST+= RCD_SCRIPTS_EXAMPLEDIR=${RCD_SCRIPTS_EXAMPLEDIR}
FILES_SUBST+= RCD_SCRIPTS_SHELL=${RCD_SCRIPTS_SHELL}
MESSAGE_SUBST+= RCD_SCRIPTS_DIR=${RCD_SCRIPTS_DIR}
# OWN_DIRS contains a list of directories for this package that should be
# created and should attempt to be destroyed by the INSTALL/DEINSTALL
# scripts. MAKE_DIRS is used the same way, but the package admin
# isn't prompted to remove the directory at post-deinstall time if it
# isn't empty.
#
# OWN_DIRS_PERMS contains a list of "directory owner group mode" sublists
# representing directories for this package that should be
# created/destroyed by the INSTALL/DEINSTALL scripts. MAKE_DIRS_PERMS
# is used the same way but the package admin isn't prompted to remove
# the directory at post-deinstall time if it isn't empty.
#
MAKE_DIRS?= # empty
MAKE_DIRS_PERMS?= # empty
OWN_DIRS?= # empty
OWN_DIRS_PERMS?= # empty
FILES_SUBST+= MAKE_DIRS=${MAKE_DIRS:Q}
FILES_SUBST+= MAKE_DIRS_PERMS=${MAKE_DIRS_PERMS:Q}
FILES_SUBST+= OWN_DIRS=${OWN_DIRS:Q}
FILES_SUBST+= OWN_DIRS_PERMS=${OWN_DIRS_PERMS:Q}
# PKG_CREATE_USERGROUP indicates whether the INSTALL script should
# automatically add any needed users/groups to the system using
# useradd/groupadd. It is either YES or NO and defaults to YES.
#
# PKG_CONFIG indicates whether the INSTALL/DEINSTALL scripts should do
# automatic config file and directory handling, or if it should
# merely inform the admin of the list of required files and
# directories needed to use the package. It is either YES or NO
# and defaults to YES.
#
# PKG_RCD_SCRIPTS indicates whether to automatically install rc.d scripts
# to ${RCD_SCRIPTS_DIR}. It is either YES or NO and defaults to
# NO. This variable only takes effect if ${PKG_CONFIG} == "YES".
#
# These values merely set the defaults for INSTALL/DEINSTALL scripts, but
# they may be overridden by resetting them in the environment.
#
PKG_CREATE_USERGROUP?= YES
PKG_CONFIG?= YES
PKG_RCD_SCRIPTS?= NO
FILES_SUBST+= PKG_CREATE_USERGROUP=${PKG_CREATE_USERGROUP}
FILES_SUBST+= PKG_CONFIG=${PKG_CONFIG}
FILES_SUBST+= PKG_RCD_SCRIPTS=${PKG_RCD_SCRIPTS}
# PKG_REGISTER_SHELLS indicates whether to automatically register shells
# in /etc/shells. It is either YES or NO and defaults to YES.
#
# PKG_SHELL contains the full pathname of the shell being installed.
#
PKG_REGISTER_SHELLS?= YES
PKG_SHELL?= # empty
FILES_SUBST+= PKG_REGISTER_SHELLS=${PKG_REGISTER_SHELLS}
FILES_SUBST+= PKG_SHELL=${PKG_SHELL:Q}
# Substitute for various programs used in the DEINSTALL/INSTALL scripts and
# in the rc.d scripts.
#
FILES_SUBST+= AWK=${AWK:Q}
FILES_SUBST+= BASENAME=${BASENAME:Q}
FILES_SUBST+= CAT=${CAT:Q}
FILES_SUBST+= CHGRP=${CHGRP:Q}
FILES_SUBST+= CHMOD=${CHMOD:Q}
FILES_SUBST+= CHOWN=${CHOWN:Q}
FILES_SUBST+= CMP=${CMP:Q}
FILES_SUBST+= CP=${CP:Q}
FILES_SUBST+= DIRNAME=${DIRNAME:Q}
FILES_SUBST+= ECHO=${ECHO:Q}
FILES_SUBST+= ECHO_N=${ECHO_N:Q}
FILES_SUBST+= EGREP=${EGREP:Q}
FILES_SUBST+= EXPR=${EXPR:Q}
FILES_SUBST+= FALSE=${FALSE:Q}
FILES_SUBST+= FIND=${FIND:Q}
FILES_SUBST+= GREP=${GREP:Q}
FILES_SUBST+= GROUPADD=${GROUPADD:Q}
FILES_SUBST+= GTAR=${GTAR:Q}
FILES_SUBST+= HEAD=${HEAD:Q}
FILES_SUBST+= ID=${ID:Q}
FILES_SUBST+= INSTALL_INFO=${INSTALL_INFO:Q}
FILES_SUBST+= LINKFARM=${LINKFARM:Q}
FILES_SUBST+= LN=${LN:Q}
FILES_SUBST+= LS=${LS:Q}
FILES_SUBST+= MKDIR=${MKDIR:Q}
FILES_SUBST+= MV=${MV:Q}
FILES_SUBST+= PERL5=${PERL5:Q}
FILES_SUBST+= PKG_ADMIN=${PKG_ADMIN_CMD:Q}
FILES_SUBST+= PKG_INFO=${PKG_INFO_CMD:Q}
FILES_SUBST+= RM=${RM:Q}
FILES_SUBST+= RMDIR=${RMDIR:Q}
FILES_SUBST+= SED=${SED:Q}
FILES_SUBST+= SETENV=${SETENV:Q}
FILES_SUBST+= SH=${SH:Q}
FILES_SUBST+= SORT=${SORT:Q}
FILES_SUBST+= SU=${SU:Q}
FILES_SUBST+= TEST=${TEST:Q}
FILES_SUBST+= TOUCH=${TOUCH:Q}
FILES_SUBST+= TR=${TR:Q}
FILES_SUBST+= TRUE=${TRUE:Q}
FILES_SUBST+= USERADD=${USERADD:Q}
FILES_SUBST+= XARGS=${XARGS:Q}
FILES_SUBST_SED= ${FILES_SUBST:S/=/@!/:S/$/!g/:S/^/ -e s!@/}
INSTALL_SCRIPTS_ENV= PKG_PREFIX=${PREFIX}
.PHONY: pre-install-script post-install-script
pre-install-script: generate-install-scripts
${_PKG_SILENT}${_PKG_DEBUG}${SETENV} ${INSTALL_SCRIPTS_ENV} \
${_PKG_DEBUG_SCRIPT} ${INSTALL_FILE} ${PKGNAME} PRE-INSTALL
post-install-script:
${_PKG_SILENT}${_PKG_DEBUG}${SETENV} ${INSTALL_SCRIPTS_ENV} \
${_PKG_DEBUG_SCRIPT} ${INSTALL_FILE} ${PKGNAME} POST-INSTALL
.PHONY: generate-install-scripts
post-build: generate-install-scripts
generate-install-scripts: # do nothing
.if !empty(DEINSTALL_SRC)
generate-install-scripts: ${DEINSTALL_FILE}
${DEINSTALL_FILE}: ${DEINSTALL_SRC}
${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC} | \
${SED} ${FILES_SUBST_SED} > ${.TARGET}
${_PKG_SILENT}${_PKG_DEBUG}${CHMOD} +x ${.TARGET}
.endif
.if !empty(INSTALL_SRC)
generate-install-scripts: ${INSTALL_FILE}
${INSTALL_FILE}: ${INSTALL_SRC}
${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC} | \
${SED} ${FILES_SUBST_SED} > ${.TARGET}
${_PKG_SILENT}${_PKG_DEBUG}${CHMOD} +x ${.TARGET}
.endif
# rc.d scripts are automatically generated and installed into the rc.d
# scripts example directory at the post-install step. The following
# variables are relevent to this process:
#
# RCD_SCRIPTS lists the basenames of the rc.d scripts
#
# RCD_SCRIPT_SRC.<script> the source file for <script>; this will
# be run through FILES_SUBST to generate
# the rc.d script
#
# RCD_SCRIPTS_EXAMPLEDIR the directory in which to install the
# example rc.d scripts
#
# If the source rc.d script is not present, then the automatic handling
# doesn't occur.
.PHONY: generate-rcd-scripts
post-build: generate-rcd-scripts
generate-rcd-scripts: # do nothing
.PHONY: install-rcd-scripts
post-install: install-rcd-scripts
install-rcd-scripts: # do nothing
.for _script_ in ${RCD_SCRIPTS}
RCD_SCRIPT_SRC.${_script_}?= ${FILESDIR}/${_script_}.sh
RCD_SCRIPT_WRK.${_script_}?= ${WRKDIR}/${_script_}
GENERATE_PLIST+= ${ECHO} ${RCD_SCRIPTS_EXAMPLEDIR:S|${PREFIX}/||}/${_script_};
. if !empty(RCD_SCRIPT_SRC.${_script_})
. if exists(${RCD_SCRIPT_SRC.${_script_}})
generate-rcd-scripts: ${RCD_SCRIPT_WRK.${_script_}}
${RCD_SCRIPT_WRK.${_script_}}: ${RCD_SCRIPT_SRC.${_script_}}
${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC} | \
${SED} ${FILES_SUBST_SED} > ${.TARGET}
${_PKG_SILENT}${_PKG_DEBUG}${CHMOD} +x ${.TARGET}
install-rcd-scripts: install-rcd-${_script_}
install-rcd-${_script_}: ${RCD_SCRIPT_WRK.${_script_}}
${_PKG_SILENT}${_PKG_DEBUG} \
if [ ! -d ${RCD_SCRIPTS_EXAMPLEDIR} ]; then \
${INSTALL} -d -o ${SHAREOWN} -g ${SHAREGRP} \
-m 0755 ${RCD_SCRIPTS_EXAMPLEDIR}; \
fi
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -f ${RCD_SCRIPT_WRK.${_script_}} ]; then \
${INSTALL_SCRIPT} ${RCD_SCRIPT_WRK.${_script_}} \
${RCD_SCRIPTS_EXAMPLEDIR}/${_script_}; \
fi
. endif
. endif
.endfor
.endif # BSD_PKG_INSTALL_MK
Reference in a new issue View git blame Copy permalink