Automatic conversion of the NetBSD pkgsrc CVS module, use with care
Find a file
itojun e28699f8b4 update to 8.11.4. security related change included (no exploit available yet)
8.11.4/8.11.4	2001/05/28
	Clean up signal handling routines to reduce the chances of heap
		corruption and other potential race conditions.
		Terminating and restarting the daemon may not be
		instantaneous due to this change.  Also, non-root users can
		no longer send out-of-band signals.  Problem reported by
		Michal Zalewski of BindView.
	If LogLevel is greater than 9 and SASL fails to negotiate an
		encryption layer, avoid core dump logging the encryption
		strength.  Problem noted by Miroslav Zubcic of Crol.
	If a server offers "AUTH=" and "AUTH " and the list of mechanisms is
		different in those two lines, sendmail might not have
		recognized (and used) all of the offered mechanisms.
	Fix an IP address lookup problem on Solaris 2.0 - 2.3.  Patch
		from Kenji Miyake.
	This time, really don't use the .. directory when expanding
		QueueDirectory wildcards.
	If a process is interrupted while closing a map, don't try to close
		the same map again while exiting.
	Allow local mailers (F=l) to contact remote hosts (e.g., via
		LMTP).  Problem noted by Norbert Klasen of the University
		of Tuebingen.
	If Timeout.QueueReturn was set to a value less the time it took
		to write a new queue file (e.g., 0 seconds), the bounce
		message would be lost.  Problem noted by Lorraine L Goff of
		Oklahoma State University.
	Pass map argument vector into map rewriting engine for the regex
		and prog map types.  Problem noted by Stephen Gildea of
		InTouch Systems, Inc.
	When closing an LDAP map due to a temporary error, close all of the
		other LDAP maps which share the original map's connection
		to the LDAP server.  Patch from Victor Duchovni of
		Morgan Stanley.
	To detect changes of NDBM aliases files check the timestamp of the
		.pag file instead of the .dir file.  Problem noted by Neil
		Rickert of Northern Illinois University.
	Don't treat temporary hesiod lookup failures as permanent.  Patch
		from Werner Wiethege.
	If ClientPortOptions is set, make sure to create the outgoing socket
		with the family set in that option.  Patch from Sean Farley.
	Avoid a segmentation fault trying to dereference a NULL pointer
		when logging a MaxHopCount exceeded error with an empty
		recipient list.  Problem noted by Chris Adams of HiWAAY
		Internet Services.
	Fix DSN for "Too many hops" bounces.  Problem noticed by Ulrich
		Windl of the Universitaet Regensburg.
	Fix DSN for "mail loops back to me" bounces.  Problem noticed by
		Kari Hurtta of the Finnish Meteorological Institute.
	Portability:
		OpenBSD has a broken setreuid() implementation.
	CONFIG: Undo change from 8.11.1: change 501 SMTP reply code back
		to 553 since it is allowed by DRUMS.
	CONFIG: Add OSTYPE(freebsd4) for FreeBSD 4.X.
	DEVTOOLS: install.sh did not properly handle paths in the source
		file name argument.  Noted by Kari Hurtta of the Finnish
		Meteorological Institute.
	DEVTOOLS: Add FAST_PID_RECYCLE to compile time options for OpenBSD
		since it generates random process ids.
	PRALIASES: Add back adaptive algorithm to deal with different endings
		of entries in the database (with/without trailing '\0').
		Patch from John Beck of Sun Microsystems.
	New Files:
		cf/ostype/freebsd4.m4
2001-05-29 03:31:26 +00:00
archivers Add and enable szdd 2001-05-14 13:03:47 +00:00
audio Standardize name of file to include for build-links to be "buildlink.mk". 2001-05-24 08:53:54 +00:00
benchmarks Add distinfo file. 2001-04-27 23:33:24 +00:00
biology Remove redundant echoing, quoting, and input redirection to sed. 2001-04-28 23:59:17 +00:00
cad Update to dinotrace-9.1d 2001-05-24 20:17:13 +00:00
chat Updated gaim to 0.11.0-pre11 2001-05-22 16:27:33 +00:00
comms Standardize name of file to include for build-links to be "buildlink.mk". 2001-05-24 08:53:54 +00:00
converters Add and enable dvi2tty. 2001-05-26 13:05:44 +00:00
cross work around a compiler bug (shocked i know) when building the 2001-05-27 15:17:36 +00:00
databases Add buildlink.mk file to link appropriate libraries and headers into 2001-05-28 05:38:04 +00:00
devel Fix mkdir for man pages. pkg/13055 by Ben Collver. 2001-05-28 12:40:26 +00:00
distfiles These files belong to $MASTER_SITE_LOCAL - moved them there! 2000-12-05 00:23:05 +00:00
editors Use buildlink.mk files to get libiconv and png dependencies, and, as a 2001-05-26 08:13:13 +00:00
emulators Update xmame to 0.37b15.1 2001-05-27 18:58:18 +00:00
finance Update to 1.4.12. Changes: 2001-05-26 01:35:54 +00:00
fonts Use SHA1, and add sizes. 2001-05-09 21:16:47 +00:00
games Standardize name of file to include for build-links to be "buildlink.mk". 2001-05-24 08:53:54 +00:00
graphics Rework build to use buildlink.mk files so that it won't pick up installed 2001-05-28 03:16:44 +00:00
ham Add an info dir entry to tntdoc.info and fix Makefile and PLIST accordingly. 2001-05-16 22:07:02 +00:00
japanese Cosmetic changes. 2001-05-28 03:27:17 +00:00
lang Use buildlink.mk files to get dependencies and to prevent unintended 2001-05-28 06:19:10 +00:00
licenses Add PalmOS SDK licenses. 2001-04-25 17:52:45 +00:00
mail update to 8.11.4. security related change included (no exploit available yet) 2001-05-29 03:31:26 +00:00
math Standardize name of file to include for build-links to be "buildlink.mk". 2001-05-24 08:53:54 +00:00
mbone Mechanical changes of tk DEPENDS: 2001-05-05 19:51:13 +00:00
meta-pkgs Update to new COMMENT style: COMMENT var in Makefile instead of pkg/COMMENT. 2001-02-17 17:52:59 +00:00
misc Drop maintainership 2001-05-26 09:56:10 +00:00
mk Introduce a new variable KJS_USE_PCRE that controls the regex library 2001-05-24 22:18:21 +00:00
net Use buildlink.mk to get readline dependency and use ${BUILDLINK_INCDIR} 2001-05-28 21:02:28 +00:00
news fix bug: Rereading active file doesn't reread active.mail (MH box 2001-05-23 13:15:34 +00:00
packages Add .cvsignore to stop cvs update listing every distfile and more 1999-11-24 11:53:24 +00:00
parallel forgot to cvs add these first. 2001-05-24 19:51:47 +00:00
pkgtools Update pkgdiff to 0.100 2001-05-24 17:02:44 +00:00
print Use buildlink.mk files to get dependencies and to find libraries and 2001-05-28 03:52:12 +00:00
security No functional change...just rework some code and re-sort some lines. 2001-05-26 07:26:51 +00:00
shells Pass --no-split option to makeinfo. Reported to packages@netbsd.org 2001-05-24 14:54:22 +00:00
sysutils Add and enable "koncd" package. 2001-05-24 14:45:07 +00:00
templates Note how to report problems, or send updates or suggestions. 2001-03-19 17:44:30 +00:00
textproc Use zlib's buildlink.mk to get dependency on zlib if needed. 2001-05-26 21:51:51 +00:00
time Update devtodo to 0.1.6.1 2001-05-15 06:54:23 +00:00
wm Remove patch obsoleted by last update. 2001-05-22 19:35:37 +00:00
www This should be the last fix to the sum (I'll stop fixing the distro). 2001-05-27 22:32:06 +00:00
x11 Updated xlockmore to 5.01.2. Changes: 2001-05-29 00:55:34 +00:00
Makefile echo -> ${ECHO} 2001-02-27 20:23:59 +00:00
Packages.txt make the bin-install target look at some FTP servers (stored in 2001-05-20 01:58:19 +00:00
pkglocate Update the usage message to explain what each option letter does. 2001-04-03 09:28:32 +00:00
README No paragraph (picking nits). 2000-07-23 18:02:33 +00:00
TODO Remove one (a2ps) 2001-05-22 13:12:40 +00:00

$NetBSD: README,v 1.11 2000/07/23 18:02:33 fredb Exp $

Welcome to the NetBSD Packages Collection
=========================================

In brief, the NetBSD Packages Collection is a set of software
utilities and libraries which have been ported to NetBSD.

The packages collection software can retrieve the software from its
home site, assuming you are connected in some way to the Internet,
verify its integrity, apply any patches, configure the software for
NetBSD, and build it.  Any prerequisite software will also be built
and installed for you.  Installation and de-installation of software
is managed by the packaging utilities.

The packages collection is made into a tar_file every week: 

	ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/tar_files/pkgsrc.tar.gz

and you can sup the pkgsrc tree using the `pkgsrc' name for the
collection.

The pkgsrc tree is laid out in various categories, and, within that,
the various packages themselves.

You need to have root privileges to install packages.  We are looking
at ways to remove this restriction.

+ To install a package on your system, you need to change into the
directory of the package, and type "make install".

+ If you've made a mistake, and decided that you don't want that
package on your system, then type "pkg_delete <pkg-name>", or "make
deinstall" while in the directory for the package.

+ To find out all the packages that you have installed on your system,
type "pkg_info".

+ To remove the work directory, type "make clean", and "make
clean-depends" will clean up any working directories for other
packages that are built in the process of making your package.

+ Optionally, you can periodically run "make clean" from the top
level pkgsrc directory. This will delete extracted and built files,
but will not affect the retreived source sets in pkgsrc/distfiles.

+ You can set variables to customise the behaviour (where packages are
installed, various options for individual packages etc), by setting
variables in /etc/mk.conf.  The pkgsrc/mk/mk.conf.example file
provides some examples for customisation.

The best way to find out what packages are in the collection is to
move to the top-level pkgsrc directory (this will usually be
/usr/pkgsrc), and type "make readme".  This will create a file called
README.html in the top-level pkgsrc directory, and also in all
category and package directories.  You can then see what packages are
available, along with a short (one-line) comment about the function of
the package, and a pointer to a fuller description, by using a browser
like lynx (see pkgsrc/www/lynx) or Mozilla (pkgsrc/www/mozilla), or
Communicator.  This is also available online as
ftp://ftp.netbsd.org/pub/NetBSD/packages/pkgsrc/README.html.

Another way to find out what packages are in the collection is to
move to the top-level pkgsrc directory and type "make index". This
will create pkgsrc/INDEX which can be viewed via "make print-index | more".
You can also search for particular packages or keywords via
"make search key=<somekeyword>".

It is also possible to use the packaging software to install
pre-compiled binary packages by typing "pkg_add <URL-of-binary-pkg>". 
To see what binary packages are available, see:

	ftp://ftp.netbsd.org/pub/NetBSD/packages/<release>/<arch>/All/

where <release> is the NetBSD release, and <arch> is the hardware
architecture.

One limitation of using binary packages provided from ftp.netbsd.org
is that all mk.conf options were set to the defaults at compile time.
LOCALBASE, in particular, defaults to /usr/pkg, so non-X binaries
will be installed in /usr/pkg/bin, man pages will be installed in
/usr/pkg/man...

When a packaged tool has major compile time choices, such as support
for multiple graphic toolkit libraries, the different options may
be available as separate packages.

For more information on the packages collection see the file
Packages.txt where you found this README, or in your top-level pkgsrc
directory.