lelgenio
/
dotfiles
Archived
3
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity
This repository has been archived on 2024-04-07. You can view files and clone it, but cannot push or open issues or pull requests.
dotfiles/neomutt/.config/neomutt/neomuttrc

6343 lines
168 KiB
Plaintext
Raw Blame History

#
# System configuration file for NeoMutt
#
set my_user = "lelgenio"
set my_provider = "disroot.org"
set my_email = "$my_user@$my_provider"
#set $my_pass
source "gpg -dq $HOME/.config/neomutt/password.gpg |"
# Default list of header fields to weed when displaying.
# Ignore all lines by default...
ignore *
# ... then allow these through.
unignore from: subject to cc date x-mailer x-url user-agent
# Display the fields in this order
hdr_order date from to cc subject
# imitate the old search-body function
macro index \eb "<search>~b " "search in message bodies"
# simulate the old url menu
macro index,pager,attach,compose \cb "\
<enter-command> set my_pipe_decode=\$pipe_decode pipe_decode<Enter>\
<pipe-message> urlview<Enter>\
<enter-command> set pipe_decode=\$my_pipe_decode; unset my_pipe_decode<Enter>" \
"call urlview to extract URLs out of a message"
# Show documentation when pressing F1
macro generic,pager <F1> "<shell-escape> less /usr/share/doc/neomutt/manual.txt<Enter>" "show NeoMutt documentation"
# show the incoming mailboxes list (just like "neomutt -y") and back when pressing "y"
macro index y "<change-folder>?" "show incoming mailboxes list"
macro pager y "<exit><change-folder>?" "show incoming mailboxes list"
bind browser y exit
# Handler for gzip compressed mailboxes
# open-hook '\.gz$' "gzip --stdout --decompress '%f' > '%t'"
# close-hook '\.gz$' "gzip --stdout '%t' > '%f'"
# append-hook '\.gz$' "gzip --stdout '%t' >> '%f'"
# If NeoMutt is unable to determine your site's domain name correctly, you can
# set the default here.
#
# set hostname=cs.hmc.edu
# If your sendmail supports the -B8BITMIME flag, enable the following
#
# set use_8bitmime
# Use mime.types to look up handlers for application/octet-stream. Can
# be undone with unmime_lookup.
mime_lookup application/octet-stream
##
## *** DEFAULT SETTINGS FOR THE ATTACHMENTS PATCH ***
##
##
## Please see the manual (section "attachments") for detailed
## documentation of the "attachments" command.
##
## Removing a pattern from a list removes that pattern literally. It
## does not remove any type matching the pattern.
##
## attachments +A */.*
## attachments +A image/jpeg
## unattachments +A */.*
##
## This leaves "attached" image/jpeg files on the allowed attachments
## list. It does not remove all items, as you might expect, because the
## second */.* is not a matching expression at this time.
##
## Remember: "unattachments" only undoes what "attachments" has done!
## It does not trigger any matching on actual messages.
## Qualify any MIME part with an "attachment" disposition, EXCEPT for
## text/x-vcard and application/pgp parts. (PGP parts are already known
## to neomutt, and can be searched for with ~g, ~G, and ~k.)
##
## I've added x-pkcs7 to this, since it functions (for S/MIME)
## analogously to PGP signature attachments. S/MIME isn't supported
## in a stock neomutt build, but we can still treat it specially here.
##
attachments +A */.*
attachments -A text/x-vcard application/pgp.*
attachments -A application/x-pkcs7-.*
## Discount all MIME parts with an "inline" disposition, unless they're
## text/plain. (Why inline a text/plain part unless it's external to the
## message flow?)
##
attachments +I text/plain
## These two lines make NeoMutt qualify MIME containers. (So, for example,
## a message/rfc822 forward will count as an attachment.) The first
## line is unnecessary if you already have "attach-allow */.*", of
## course. These are off by default! The MIME elements contained
## within a message/* or multipart/* are still examined, even if the
## containers themselves don't qualify.
##
#attachments +A message/.* multipart/.*
#attachments +I message/.* multipart/.*
## You probably don't really care to know about deleted attachments.
attachments -A message/external-body
attachments -I message/external-body
##
## More settings
##
# set abort_noattach=no
#
# Name: abort_noattach
# Type: quadoption
# Default: no
#
#
# If set to yes, when composing messages containing the regular
# expression specified by $abort_noattach_regex and no attachments are
# given, composition will be aborted. If set to no, composing messages
# as such will never be aborted.
#
# Example:
# set abort_noattach_regex = "\\<attach(|ed|ments?)\\>"
#
#
# set abort_noattach_regex="\\<(attach|attached|attachments?)\\>"
#
# Name: abort_noattach_regex
# Type: regular expression
# Default: "\\<(attach|attached|attachments?)\\>"
#
#
# Specifies a regular expression to match against the body of the message, to
# determine if an attachment was mentioned but mistakenly forgotten. If it
# matches, $abort_noattach will be consulted to determine if message sending
# will be aborted.
#
# Like other regular expressions in NeoMutt, the search is case sensitive
# if the pattern contains at least one upper case letter, and case
# insensitive otherwise.
#
#
# set abort_nosubject=ask-yes
#
# Name: abort_nosubject
# Type: quadoption
# Default: ask-yes
#
#
# If set to yes, when composing messages and no subject is given
# at the subject prompt, composition will be aborted. If set to
# no, composing messages with no subject given at the subject
# prompt will never be aborted.
#
#
# set abort_unmodified=yes
#
# Name: abort_unmodified
# Type: quadoption
# Default: yes
#
#
# If set to yes, composition will automatically abort after
# editing the message body if no changes are made to the file (this
# check only happens after the first edit of the file). When set
# to no, composition will never be aborted.
#
#
# set alias_file="~/.neomuttrc"
#
# Name: alias_file
# Type: path
# Default: "~/.neomuttrc"
#
#
# The default file in which to save aliases created by the
# <create-alias> function. Entries added to this file are
# encoded in the character set specified by $config_charset if it
# is set or the current character set otherwise.
#
# Note: NeoMutt will not automatically source this file; you must
# explicitly use the ``source'' command for it to be executed in case
# this option points to a dedicated alias file.
#
# The default for this option is the currently used neomuttrc file, or
# ``~/.neomuttrc'' if no user neomuttrc was found.
#
#
# set alias_format="%4n %2f %t %-10a %r"
#
# Name: alias_format
# Type: string
# Default: "%4n %2f %t %-10a %r"
#
#
# Specifies the format of the data displayed for the ``alias'' menu. The
# following printf(3)-style sequences are available:
# %a Alias name
# %f Flags - currently, a ``d'' for an alias marked for deletion
# %n Index number
# %r Address which alias expands to
# %t Character which indicates if the alias is tagged for inclusion
#
#
# set allow_8bit=yes
#
# Name: allow_8bit
# Type: boolean
# Default: yes
#
#
# Controls whether 8-bit data is converted to 7-bit using either Quoted-
# Printable or Base64 encoding when sending mail.
#
#
# set allow_ansi=no
#
# Name: allow_ansi
# Type: boolean
# Default: no
#
#
# Controls whether ANSI color codes in messages (and color tags in
# rich text messages) are to be interpreted.
# Messages containing these codes are rare, but if this option is set,
# their text will be colored accordingly. Note that this may override
# your color choices, and even present a security problem, since a
# message could include a line like
# [-- PGP output follows ...
#
# and give it the same color as your attachment color (see also
# $crypt_timestamp).
#
#
# set arrow_cursor=no
#
# Name: arrow_cursor
# Type: boolean
# Default: no
#
#
# When set, an arrow (``->'') will be used to indicate the current entry
# in menus instead of highlighting the whole line. On slow network or modem
# links this will make response faster because there is less that has to
# be redrawn on the screen when moving to the next or previous entries
# in the menu.
#
#
# set ascii_chars=no
#
# Name: ascii_chars
# Type: boolean
# Default: no
#
#
# If set, NeoMutt will use plain ASCII characters when displaying thread
# and attachment trees, instead of the default ACS characters.
#
#
# set ask_follow_up=no
#
# Name: ask_follow_up
# Type: boolean
# Default: no
#
#
# If set, NeoMutt will prompt you for follow-up groups before editing
# the body of an outgoing message.
#
#
# set ask_x_comment_to=no
#
# Name: ask_x_comment_to
# Type: boolean
# Default: no
#
#
# If set, NeoMutt will prompt you for x-comment-to field before editing
# the body of an outgoing message.
#
#
# set askbcc=no
#
# Name: askbcc
# Type: boolean
# Default: no
#
#
# If set, NeoMutt will prompt you for blind-carbon-copy (Bcc) recipients
# before editing an outgoing message.
#
#
# set askcc=no
#
# Name: askcc
# Type: boolean
# Default: no
#
#
# If set, NeoMutt will prompt you for carbon-copy (Cc) recipients before
# editing the body of an outgoing message.
#
#
# set assumed_charset=""
#
# Name: assumed_charset
# Type: string
# Default: ""
#
#
# This variable is a colon-separated list of character encoding
# schemes for messages without character encoding indication.
# Header field values and message body content without character encoding
# indication would be assumed that they are written in one of this list.
# By default, all the header fields and message body without any charset
# indication are assumed to be in ``us-ascii''.
#
# For example, Japanese users might prefer this:
# set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
#
# However, only the first content is valid for the message body.
#
#
# set attach_charset=""
#
# Name: attach_charset
# Type: string
# Default: ""
#
#
# This variable is a colon-separated list of character encoding
# schemes for text file attachments. NeoMutt uses this setting to guess
# which encoding files being attached are encoded in to convert them to
# a proper character set given in $send_charset.
#
# If unset, the value of $charset will be used instead.
# For example, the following configuration would work for Japanese
# text handling:
# set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
#
# Note: for Japanese users, ``iso-2022-*'' must be put at the head
# of the value as shown above if included.
#
#
# set attach_format="%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "
#
# Name: attach_format
# Type: string
# Default: "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "
#
#
# This variable describes the format of the ``attachment'' menu. The
# following printf(3)-style sequences are understood:
# %C Charset
# %c Requires charset conversion (``n'' or ``c'')
# %D Deleted flag
# %d Description (if none, falls back to %F)
# %e MIME content-transfer-encoding
# %f Filename
# %F Filename in content-disposition header (if none, falls back to %f)
# %I Disposition (``I'' for inline, ``A'' for attachment)
# %m Major MIME type
# %M MIME subtype
# %n Attachment number
# %Q ``Q'', if MIME part qualifies for attachment counting
# %s Size
# %T Graphic tree characters
# %t Tagged flag
# %u Unlink (=to delete) flag
# %X Number of qualifying MIME parts in this part and its children
# (please see the ``attachments'' section for possible speed effects)
# %>X Right justify the rest of the string and pad with character ``X''
# %|X Pad to the end of the line with character ``X''
# %*X Soft-fill with character ``X'' as pad
#
#
# For an explanation of ``soft-fill'', see the $index_format documentation.
#
#
# set attach_sep="\n"
#
# Name: attach_sep
# Type: string
# Default: "\n"
#
#
# The separator to add between attachments when operating (saving,
# printing, piping, etc) on a list of tagged attachments.
#
#
# set attach_split=yes
#
# Name: attach_split
# Type: boolean
# Default: yes
#
#
# If this variable is unset, when operating (saving, printing, piping,
# etc) on a list of tagged attachments, NeoMutt will concatenate the
# attachments and will operate on them as a single attachment. The
# $attach_sep separator is added after each attachment. When set,
# NeoMutt will operate on the attachments one by one.
#
#
# set attribution="On %d, %n wrote:"
#
# Name: attribution
# Type: string
# Default: "On %d, %n wrote:"
#
#
# This is the string that will precede a message which has been included
# in a reply. For a full listing of defined printf(3)-like sequences see
# the section on $index_format.
#
#
# set attribution_locale=""
#
# Name: attribution_locale
# Type: string
# Default: ""
#
#
# The locale used by strftime(3) to format dates in the
# attribution string. Legal values are the strings your system
# accepts for the locale environment variable $LC_TIME.
#
# This variable is to allow the attribution date format to be
# customized by recipient or folder using hooks. By default, NeoMutt
# will use your locale environment, so there is no need to set
# this except to override that default.
#
#
# set auto_tag=no
#
# Name: auto_tag
# Type: boolean
# Default: no
#
#
# When set, functions in the index menu which affect a message
# will be applied to all tagged messages (if there are any). When
# unset, you must first use the <tag-prefix> function (bound to ``;''
# by default) to make the next function apply to all tagged messages.
#
#
# set autoedit=no
#
# Name: autoedit
# Type: boolean
# Default: no
#
#
# When set along with $edit_headers, NeoMutt will skip the initial
# send-menu (prompting for subject and recipients) and allow you to
# immediately begin editing the body of your
# message. The send-menu may still be accessed once you have finished
# editing the body of your message.
#
# Note: when this option is set, you cannot use send-hooks that depend
# on the recipients when composing a new (non-reply) message, as the initial
# list of recipients is empty.
#
# Also see $fast_reply.
#
#
# set beep=yes
#
# Name: beep
# Type: boolean
# Default: yes
#
#
# When this variable is set, NeoMutt will beep when an error occurs.
#
#
# set beep_new=no
#
# Name: beep_new
# Type: boolean
# Default: no
#
#
# When this variable is set, NeoMutt will beep whenever it prints a message
# notifying you of new mail. This is independent of the setting of the
# $beep variable.
#
#
# set bounce=ask-yes
#
# Name: bounce
# Type: quadoption
# Default: ask-yes
#
#
# Controls whether you will be asked to confirm bouncing messages.
# If set to yes you don't get asked if you want to bounce a
# message. Setting this variable to no is not generally useful,
# and thus not recommended, because you are unable to bounce messages.
#
#
# set bounce_delivered=yes
#
# Name: bounce_delivered
# Type: boolean
# Default: yes
#
#
# When this variable is set, NeoMutt will include Delivered-To headers when
# bouncing messages. Postfix users may wish to unset this variable.
#
#
# set braille_friendly=no
#
# Name: braille_friendly
# Type: boolean
# Default: no
#
#
# When this variable is set, NeoMutt will place the cursor at the beginning
# of the current line in menus, even when the $arrow_cursor variable
# is unset, making it easier for blind persons using Braille displays to
# follow these menus. The option is unset by default because many
# visual terminals don't permit making the cursor invisible.
#
#
# set browser_abbreviate_mailboxes=yes
#
# Name: browser_abbreviate_mailboxes
# Type: boolean
# Default: yes
#
#
# When this variable is set, mutt will abbreviate mailbox
# names in the browser mailbox list, using '~' and '='
# shortcuts.
#
# The default "alpha" setting of $sort_browser uses
# locale-based sorting (using strcoll(3)), which ignores some
# punctuation. This can lead to some situations where the order
# doesn't make intuitive sense. In those cases, it may be
# desirable to unset this variable.
#
#
# set catchup_newsgroup=ask-yes
#
# Name: catchup_newsgroup
# Type: quadoption
# Default: ask-yes
#
#
# If this variable is set, NeoMutt will mark all articles in newsgroup
# as read when you quit the newsgroup (catchup newsgroup).
#
#
# set certificate_file="~/.mutt_certificates"
#
# Name: certificate_file
# Type: path
# Default: "~/.mutt_certificates"
#
#
# This variable specifies the file where the certificates you trust
# are saved. When an unknown certificate is encountered, you are asked
# if you accept it or not. If you accept it, the certificate can also
# be saved in this file and further connections are automatically
# accepted.
#
# You can also manually add CA certificates in this file. Any server
# certificate that is signed with one of these CA certificates is
# also automatically accepted.
#
# Example:
# set certificate_file=~/.neomutt/certificates
#
#
# set change_folder_next=no
#
# Name: change_folder_next
# Type: boolean
# Default: no
#
#
# When this variable is set, the <change-folder> function
# mailbox suggestion will start at the next folder in your ``mailboxes''
# list, instead of starting at the first folder in the list.
#
#
# set charset=""
#
# Name: charset
# Type: string
# Default: ""
#
#
# Character set your terminal uses to display and enter textual data.
# It is also the fallback for $send_charset.
#
# Upon startup NeoMutt tries to derive this value from environment variables
# such as $LC_CTYPE or $LANG.
#
# Note: It should only be set in case NeoMutt isn't able to determine the
# character set used correctly.
#
#
# set check_mbox_size=no
#
# Name: check_mbox_size
# Type: boolean
# Default: no
#
#
# When this variable is set, NeoMutt will use file size attribute instead of
# access time when checking for new mail in mbox and mmdf folders.
#
# This variable is unset by default and should only be enabled when
# new mail detection for these folder types is unreliable or doesn't work.
#
# Note that enabling this variable should happen before any ``mailboxes''
# directives occur in configuration files regarding mbox or mmdf folders
# because NeoMutt needs to determine the initial new mail status of such a
# mailbox by performing a fast mailbox scan when it is defined.
# Afterwards the new mail status is tracked by file size changes.
#
#
# set check_new=yes
#
# Name: check_new
# Type: boolean
# Default: yes
#
#
# Note: this option only affects maildir and MH style
# mailboxes.
#
# When set, NeoMutt will check for new mail delivered while the
# mailbox is open. Especially with MH mailboxes, this operation can
# take quite some time since it involves scanning the directory and
# checking each file to see if it has already been looked at. If
# this variable is unset, no check for new mail is performed
# while the mailbox is open.
#
#
# set collapse_all=no
#
# Name: collapse_all
# Type: boolean
# Default: no
#
#
# When set, NeoMutt will collapse all threads when entering a folder.
#
#
# set collapse_flagged=yes
#
# Name: collapse_flagged
# Type: boolean
# Default: yes
#
#
# When unset, NeoMutt will not collapse a thread if it contains any
# flagged messages.
#
#
# set collapse_unread=yes
#
# Name: collapse_unread
# Type: boolean
# Default: yes
#
#
# When unset, NeoMutt will not collapse a thread if it contains any
# unread messages.
#
#
# set compose_format="-- NeoMutt: Compose [Approx. msg size: %l Atts: %a]%>-"
#
# Name: compose_format
# Type: string
# Default: "-- NeoMutt: Compose [Approx. msg size: %l Atts: %a]%>-"
#
#
# Controls the format of the status line displayed in the ``compose''
# menu. This string is similar to $status_format, but has its own
# set of printf(3)-like sequences:
# %a Total number of attachments
# %h Local hostname
# %l Approximate size (in bytes) of the current message
# %v NeoMutt version string
#
#
# See the text describing the $status_format option for more
# information on how to set $compose_format.
#
#
# set config_charset=""
#
# Name: config_charset
# Type: string
# Default: ""
#
#
# When defined, NeoMutt will recode commands in rc files from this
# encoding to the current character set as specified by $charset
# and aliases written to $alias_file from the current character set.
#
# Please note that if setting $charset it must be done before
# setting $config_charset.
#
# Recoding should be avoided as it may render unconvertable
# characters as question marks which can lead to undesired
# side effects (for example in regular expressions).
#
#
# set confirmappend=yes
#
# Name: confirmappend
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will prompt for confirmation when appending messages to
# an existing mailbox.
#
#
# set confirmcreate=yes
#
# Name: confirmcreate
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will prompt for confirmation when saving messages to a
# mailbox which does not yet exist before creating it.
#
#
# set connect_timeout=30
#
# Name: connect_timeout
# Type: number
# Default: 30
#
#
# Causes NeoMutt to timeout a network connection (for IMAP, POP or SMTP) after this
# many seconds if the connection is not able to be established. A negative
# value causes NeoMutt to wait indefinitely for the connection attempt to succeed.
#
#
# set content_type="text/plain"
#
# Name: content_type
# Type: string
# Default: "text/plain"
#
#
# Sets the default Content-Type for the body of newly composed messages.
#
#
# set copy=yes
#
# Name: copy
# Type: quadoption
# Default: yes
#
#
# This variable controls whether or not copies of your outgoing messages
# will be saved for later references. Also see $record,
# $save_name, $force_name and ``fcc-hook''.
#
#
# set crypt_autoencrypt=no
#
# Name: crypt_autoencrypt
# Type: boolean
# Default: no
#
#
# Setting this variable will cause NeoMutt to always attempt to PGP
# encrypt outgoing messages. This is probably only useful in
# connection to the ``send-hook'' command. It can be overridden
# by use of the pgp menu, when encryption is not required or
# signing is requested as well. If $smime_is_default is set,
# then OpenSSL is used instead to create S/MIME messages and
# settings can be overridden by use of the smime menu instead.
# (Crypto only)
#
#
# set crypt_autopgp=yes
#
# Name: crypt_autopgp
# Type: boolean
# Default: yes
#
#
# This variable controls whether or not NeoMutt may automatically enable
# PGP encryption/signing for messages. See also $crypt_autoencrypt,
# $crypt_replyencrypt,
# $crypt_autosign, $crypt_replysign and $smime_is_default.
#
#
# set crypt_autosign=no
#
# Name: crypt_autosign
# Type: boolean
# Default: no
#
#
# Setting this variable will cause NeoMutt to always attempt to
# cryptographically sign outgoing messages. This can be overridden
# by use of the pgp menu, when signing is not required or
# encryption is requested as well. If $smime_is_default is set,
# then OpenSSL is used instead to create S/MIME messages and settings can
# be overridden by use of the smime menu instead of the pgp menu.
# (Crypto only)
#
#
# set crypt_autosmime=yes
#
# Name: crypt_autosmime
# Type: boolean
# Default: yes
#
#
# This variable controls whether or not NeoMutt may automatically enable
# S/MIME encryption/signing for messages. See also $crypt_autoencrypt,
# $crypt_replyencrypt,
# $crypt_autosign, $crypt_replysign and $smime_is_default.
#
#
# set crypt_confirmhook=yes
#
# Name: crypt_confirmhook
# Type: boolean
# Default: yes
#
#
# If set, then you will be prompted for confirmation of keys when using
# the crypt-hook command. If unset, no such confirmation prompt will
# be presented. This is generally considered unsafe, especially where
# typos are concerned.
#
#
# set crypt_opportunistic_encrypt=no
#
# Name: crypt_opportunistic_encrypt
# Type: boolean
# Default: no
#
#
# Setting this variable will cause NeoMutt to automatically enable and
# disable encryption, based on whether all message recipient keys
# can be located by NeoMutt.
#
# When this option is enabled, NeoMutt will enable/disable encryption
# each time the TO, CC, and BCC lists are edited. If
# $edit_headers is set, NeoMutt will also do so each time the message
# is edited.
#
# While this is set, encryption can't be manually enabled/disabled.
# The pgp or smime menus provide a selection to temporarily disable
# this option for the current message.
#
# If $crypt_autoencrypt or $crypt_replyencrypt enable encryption for
# a message, this option will be disabled for that message. It can
# be manually re-enabled in the pgp or smime menus.
# (Crypto only)
#
#
# set crypt_replyencrypt=yes
#
# Name: crypt_replyencrypt
# Type: boolean
# Default: yes
#
#
# If set, automatically PGP or OpenSSL encrypt replies to messages which are
# encrypted.
# (Crypto only)
#
#
# set crypt_replysign=no
#
# Name: crypt_replysign
# Type: boolean
# Default: no
#
#
# If set, automatically PGP or OpenSSL sign replies to messages which are
# signed.
#
# Note: this does not work on messages that are encrypted
# and signed!
# (Crypto only)
#
#
# set crypt_replysignencrypted=no
#
# Name: crypt_replysignencrypted
# Type: boolean
# Default: no
#
#
# If set, automatically PGP or OpenSSL sign replies to messages
# which are encrypted. This makes sense in combination with
# $crypt_replyencrypt, because it allows you to sign all
# messages which are automatically encrypted. This works around
# the problem noted in $crypt_replysign, that NeoMutt is not able
# to find out whether an encrypted message is also signed.
# (Crypto only)
#
#
# set crypt_timestamp=yes
#
# Name: crypt_timestamp
# Type: boolean
# Default: yes
#
#
# If set, NeoMutt will include a time stamp in the lines surrounding
# PGP or S/MIME output, so spoofing such lines is more difficult.
# If you are using colors to mark these lines, and rely on these,
# you may unset this setting.
# (Crypto only)
#
#
# set crypt_use_gpgme=no
#
# Name: crypt_use_gpgme
# Type: boolean
# Default: no
#
#
# This variable controls the use of the GPGME-enabled crypto backends.
# If it is set and NeoMutt was built with gpgme support, the gpgme code for
# S/MIME and PGP will be used instead of the classic code. Note that
# you need to set this option in .neomuttrc; it won't have any effect when
# used interactively.
#
# Note that the GPGME backend does not support creating old-style inline
# (traditional) PGP encrypted or signed messages (see $pgp_autoinline).
#
#
# set crypt_use_pka=no
#
# Name: crypt_use_pka
# Type: boolean
# Default: no
#
#
# Controls whether NeoMutt uses PKA
# (see http://www.g10code.de/docs/pka-intro.de.pdf) during signature
# verification (only supported by the GPGME backend).
#
#
# set crypt_verify_sig=yes
#
# Name: crypt_verify_sig
# Type: quadoption
# Default: yes
#
#
# If ``yes'', always attempt to verify PGP or S/MIME signatures.
# If ``ask-*'', ask whether or not to verify the signature.
# If ``no'', never attempt to verify cryptographic signatures.
# (Crypto only)
#
#
# set date_format="!%a, %b %d, %Y at %I:%M:%S%p %Z"
#
# Name: date_format
# Type: string
# Default: "!%a, %b %d, %Y at %I:%M:%S%p %Z"
#
#
# This variable controls the format of the date printed by the ``%d''
# sequence in $index_format. This is passed to the strftime(3)
# function to process the date, see the man page for the proper syntax.
#
# Unless the first character in the string is a bang (``!''), the month
# and week day names are expanded according to the locale.
# If the first character in the string is a
# bang, the bang is discarded, and the month and week day names in the
# rest of the string are expanded in the C locale (that is in US
# English).
#
#
# set debug_file="~/.neomuttdebug"
#
# Name: debug_file
# Type: path
# Default: "~/.neomuttdebug"
#
#
# Debug logging is controlled by the variables $debug_file and $debug_level.
# $debug_file specifies the root of the filename. NeoMutt will add ``0'' to the end.
# Each time NeoMutt is run with logging enabled, the log files are rotated.
# A maximum of five log files are kept, numbered 0 (most recent) to 4 (oldest).
#
# This option can be enabled on the command line, ``neomutt -l mylog''
#
# See also: $debug_level
#
#
# set debug_level=0
#
# Name: debug_level
# Type: number
# Default: 0
#
#
# Debug logging is controlled by the variables $debug_file and $debug_level.
#
# The debug level controls how much information is saved to the log file.
# If you have a problem with NeoMutt, then enabling logging may help find the cause.
# Levels 1-3 will usually provide enough information for writing a bug report.
# Levels 4,5 will be extremely verbose.
#
# Warning: Logging at high levels may save private information to the file.
#
# This option can be enabled on the command line, ``neomutt -d 2''
#
# See also: $debug_file
#
#
# set default_hook="~f %s !~P | (~P ~C %s)"
#
# Name: default_hook
# Type: string
# Default: "~f %s !~P | (~P ~C %s)"
#
#
# This variable controls how ``message-hook'', ``reply-hook'', ``send-hook'',
# ``send2-hook'', ``save-hook'', and ``fcc-hook'' will
# be interpreted if they are specified with only a simple regex,
# instead of a matching pattern. The hooks are expanded when they are
# declared, so a hook will be interpreted according to the value of this
# variable at the time the hook is declared.
#
# The default value matches
# if the message is either from a user matching the regular expression
# given, or if it is from you (if the from address matches
# ``alternates'') and is to or cc'ed to a user matching the given
# regular expression.
#
#
# set delete=ask-yes
#
# Name: delete
# Type: quadoption
# Default: ask-yes
#
#
# Controls whether or not messages are really deleted when closing or
# synchronizing a mailbox. If set to yes, messages marked for
# deleting will automatically be purged without prompting. If set to
# no, messages marked for deletion will be kept in the mailbox.
#
#
# set delete_untag=yes
#
# Name: delete_untag
# Type: boolean
# Default: yes
#
#
# If this option is set, NeoMutt will untag messages when marking them
# for deletion. This applies when you either explicitly delete a message,
# or when you save it to another folder.
#
#
# set digest_collapse=yes
#
# Name: digest_collapse
# Type: boolean
# Default: yes
#
#
# If this option is set, NeoMutt's received-attachments menu will not show the subparts of
# individual messages in a multipart/digest. To see these subparts, press ``v'' on that menu.
#
#
# set display_filter=""
#
# Name: display_filter
# Type: command
# Default: ""
#
#
# When set, specifies a command used to filter messages. When a message
# is viewed it is passed as standard input to $display_filter, and the
# filtered message is read from the standard output.
#
# When preparing the message, NeoMutt inserts some escape sequences into the
# text. They are of the form: <esc>]9;XXX<bel> where "XXX" is a random
# 64-bit number.
#
# If these escape sequences interfere with your filter, they can be removed
# using a tool like ansifilter or sed 's/^\x1b]9;[0-9]\+\x7//'
#
# If they are removed, then PGP and MIME headers will no longer be coloured.
# This can be fixed by adding this to your config:
# color body magenta default '^\[-- .* --\]$'.
#
#
# set dsn_notify=""
#
# Name: dsn_notify
# Type: string
# Default: ""
#
#
# This variable sets the request for when notification is returned. The
# string consists of a comma separated list (no spaces!) of one or more
# of the following: never, to never request notification,
# failure, to request notification on transmission failure,
# delay, to be notified of message delays, success, to be
# notified of successful transmission.
#
# Example:
# set dsn_notify="failure,delay"
#
# Note: when using $sendmail for delivery, you should not enable
# this unless you are either using Sendmail 8.8.x or greater or a MTA
# providing a sendmail(1)-compatible interface supporting the -N option
# for DSN. For SMTP delivery, DSN support is auto-detected so that it
# depends on the server whether DSN will be used or not.
#
#
# set dsn_return=""
#
# Name: dsn_return
# Type: string
# Default: ""
#
#
# This variable controls how much of your message is returned in DSN
# messages. It may be set to either hdrs to return just the
# message header, or full to return the full message.
#
# Example:
# set dsn_return=hdrs
#
# Note: when using $sendmail for delivery, you should not enable
# this unless you are either using Sendmail 8.8.x or greater or a MTA
# providing a sendmail(1)-compatible interface supporting the -R option
# for DSN. For SMTP delivery, DSN support is auto-detected so that it
# depends on the server whether DSN will be used or not.
#
#
# set duplicate_threads=yes
#
# Name: duplicate_threads
# Type: boolean
# Default: yes
#
#
# This variable controls whether NeoMutt, when $sort is set to threads, threads
# messages with the same Message-Id together. If it is set, it will indicate
# that it thinks they are duplicates of each other with an equals sign
# in the thread tree.
#
#
# set edit_headers=no
#
# Name: edit_headers
# Type: boolean
# Default: no
#
#
# This option allows you to edit the header of your outgoing messages
# along with the body of your message.
#
# Although the compose menu may have localized header labels, the
# labels passed to your editor will be standard RFC2822 headers,
# (e.g. To:, Cc:, Subject:). Headers added in your editor must
# also be RFC2822 headers, or one of the pseudo headers listed in
# ``edit-header''. NeoMutt will not understand localized header
# labels, just as it would not when parsing an actual email.
#
# Note that changes made to the References: and Date: headers are
# ignored for interoperability reasons.
#
#
# set editor="vi"
#
# Name: editor
# Type: command
# Default: "vi"
#
#
# This variable specifies which editor is used by NeoMutt.
# It defaults to the value of the $VISUAL, or $EDITOR, environment
# variable, or to the string ``vi'' if neither of those are set.
#
# The $editor string may contain a %s escape, which will be replaced by the name
# of the file to be edited. If the %s escape does not appear in $editor, a
# space and the name to be edited are appended.
#
# The resulting string is then executed by running
# sh -c 'string'
#
# where string is the expansion of $editor described above.
#
#
# set empty_subject="Re: your mail"
#
# Name: empty_subject
# Type: string
# Default: "Re: your mail"
#
#
# This variable specifies the subject to be used when replying to an email
# with an empty subject. It defaults to "Re: your mail".
#
#
# set encode_from=no
#
# Name: encode_from
# Type: boolean
# Default: no
#
#
# When set, NeoMutt will quoted-printable encode messages when
# they contain the string ``From '' (note the trailing space) in the beginning of a line.
# This is useful to avoid the tampering certain mail delivery and transport
# agents tend to do with messages (in order to prevent tools from
# misinterpreting the line as a mbox message separator).
#
#
# set entropy_file=""
#
# Name: entropy_file
# Type: path
# Default: ""
#
#
# The file which includes random data that is used to initialize SSL
# library functions.
#
#
# set envelope_from_address=""
#
# Name: envelope_from_address
# Type: e-mail address
# Default: ""
#
#
# Manually sets the envelope sender for outgoing messages.
# This value is ignored if $use_envelope_from is unset.
#
#
# set escape="~"
#
# Name: escape
# Type: string
# Default: "~"
#
#
# Escape character to use for functions in the built-in editor.
#
#
# set fast_reply=no
#
# Name: fast_reply
# Type: boolean
# Default: no
#
#
# When set, the initial prompt for recipients and subject are skipped
# when replying to messages, and the initial prompt for subject is
# skipped when forwarding messages.
#
# Note: this variable has no effect when the $autoedit
# variable is set.
#
#
# set fcc_attach=yes
#
# Name: fcc_attach
# Type: quadoption
# Default: yes
#
#
# This variable controls whether or not attachments on outgoing messages
# are saved along with the main body of your message.
#
#
# set fcc_clear=no
#
# Name: fcc_clear
# Type: boolean
# Default: no
#
#
# When this variable is set, FCCs will be stored unencrypted and
# unsigned, even when the actual message is encrypted and/or
# signed.
# (PGP only)
#
#
# set flag_chars="*!DdrONon- "
#
# Name: flag_chars
# Type: string
# Default: "*!DdrONon- "
#
#
# Controls the characters used in several flags.
# Character Default Description
# 1 * The mail is tagged.
# 2 ! The mail is flagged as important.
# 3 D The mail is marked for deletion.
# 4 d The mail has attachments marked for deletion.
# 5 r The mail has been replied to.
# 6 O The mail is Old (Unread but seen).
# 7 N The mail is New (Unread but not seen).
# 8 o The mail thread is Old (Unread but seen).
# 9 n The mail thread is New (Unread but not seen).
# 10 - The mail is read - %S expando.
# 11 <space> The mail is read - %Z expando.
#
#
# set flag_safe=no
#
# Name: flag_safe
# Type: boolean
# Default: no
#
#
# If set, flagged messages cannot be deleted.
#
#
set folder="imaps://$my_email"
#
# Name: folder
# Type: path
# Default: "~/Mail"
#
#
# Specifies the default location of your mailboxes. A ``+'' or ``='' at the
# beginning of a pathname will be expanded to the value of this
# variable. Note that if you change this variable (from the default)
# value you need to make sure that the assignment occurs before
# you use ``+'' or ``='' for any other variables since expansion takes place
# when handling the ``mailboxes'' command.
#
#
# set folder_format="%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"
#
# Name: folder_format
# Type: string
# Default: "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"
#
#
# This variable allows you to customize the file browser display to your
# personal taste. This string is similar to $index_format, but has
# its own set of printf(3)-like sequences:
# %C Current file number
# %d Date/time folder was last modified
# %D Date/time folder was last modified using $date_format.
# %f Filename (``/'' is appended to directory names,
# ``@'' to symbolic links and ``*'' to executable files)
# %F File permissions
# %g Group name (or numeric gid, if missing)
# %l Number of hard links
# %m Number of messages in the mailbox *
# %n Number of unread messages in the mailbox *
# %N ``N'' if mailbox has new mail, blank otherwise
# %s Size in bytes
# %t ``*'' if the file is tagged, blank otherwise
# %u Owner name (or numeric uid, if missing)
# %>X Right justify the rest of the string and pad with character ``X''
# %|X Pad to the end of the line with character ``X''
# %*X Soft-fill with character ``X'' as pad
#
#
# For an explanation of ``soft-fill'', see the $index_format documentation.
#
# * = can be optionally printed if nonzero
#
# %m, %n, and %N only work for monitored mailboxes.
# %m requires $mail_check_stats to be set.
# %n requires $mail_check_stats to be set (except for IMAP mailboxes).
#
#
# set followup_to=yes
#
# Name: followup_to
# Type: boolean
# Default: yes
#
#
# Controls whether or not the ``Mail-Followup-To:'' header field is
# generated when sending mail. When set, NeoMutt will generate this
# field when you are replying to a known mailing list, specified with
# the ``subscribe'' or ``lists'' commands.
#
# This field has two purposes. First, preventing you from
# receiving duplicate copies of replies to messages which you send
# to mailing lists, and second, ensuring that you do get a reply
# separately for any messages sent to known lists to which you are
# not subscribed.
#
# The header will contain only the list's address
# for subscribed lists, and both the list address and your own
# email address for unsubscribed lists. Without this header, a
# group reply to your message sent to a subscribed list will be
# sent to both the list and your address, resulting in two copies
# of the same email for you.
#
#
# set followup_to_poster=ask-yes
#
# Name: followup_to_poster
# Type: quadoption
# Default: ask-yes
#
#
# If this variable is set and the keyword "poster" is present in
# Followup-To header, follow-up to newsgroup function is not
# permitted. The message will be mailed to the submitter of the
# message via mail.
#
#
# set force_name=no
#
# Name: force_name
# Type: boolean
# Default: no
#
#
# This variable is similar to $save_name, except that NeoMutt will
# store a copy of your outgoing message by the username of the address
# you are sending to even if that mailbox does not exist.
#
# Also see the $record variable.
#
#
# set forward_attribution_intro="----- Forwarded message from %f -----"
#
# Name: forward_attribution_intro
# Type: string
# Default: "----- Forwarded message from %f -----"
#
#
# This is the string that will precede a message which has been forwarded
# in the main body of a message (when $mime_forward is unset).
# For a full listing of defined printf(3)-like sequences see
# the section on $index_format. See also $attribution_locale.
#
#
# set forward_attribution_trailer="----- End forwarded message -----"
#
# Name: forward_attribution_trailer
# Type: string
# Default: "----- End forwarded message -----"
#
#
# This is the string that will follow a message which has been forwarded
# in the main body of a message (when $mime_forward is unset).
# For a full listing of defined printf(3)-like sequences see
# the section on $index_format. See also $attribution_locale.
#
#
# set forward_decode=yes
#
# Name: forward_decode
# Type: boolean
# Default: yes
#
#
# Controls the decoding of complex MIME messages into text/plain when
# forwarding a message. The message header is also RFC2047 decoded.
# This variable is only used, if $mime_forward is unset,
# otherwise $mime_forward_decode is used instead.
#
#
# set forward_decrypt=yes
#
# Name: forward_decrypt
# Type: boolean
# Default: yes
#
#
# Controls the handling of encrypted messages when forwarding a message.
# When set, the outer layer of encryption is stripped off. This
# variable is only used if $mime_forward is set and
# $mime_forward_decode is unset.
# (PGP only)
#
#
# set forward_edit=yes
#
# Name: forward_edit
# Type: quadoption
# Default: yes
#
#
# This quadoption controls whether or not the user is automatically
# placed in the editor when forwarding messages. For those who always want
# to forward with no modification, use a setting of ``no''.
#
#
# set forward_format="[%a: %s]"
#
# Name: forward_format
# Type: string
# Default: "[%a: %s]"
#
#
# This variable controls the default subject when forwarding a message.
# It uses the same format sequences as the $index_format variable.
#
#
# set forward_quote=no
#
# Name: forward_quote
# Type: boolean
# Default: no
#
#
# When set, forwarded messages included in the main body of the
# message (when $mime_forward is unset) will be quoted using
# $indent_string.
#
#
# set forward_references=no
#
# Name: forward_references
# Type: boolean
# Default: no
#
#
# When set, forwarded messages set the ``In-Reply-To:'' and
# ``References:'' headers in the same way as normal replies would. Hence the
# forwarded message becomes part of the original thread instead of starting
# a new one.
#
#
set from="$my_email"
set use_from= yes
#
# Name: from
# Type: e-mail address
# Default: ""
#
#
# When set, this variable contains a default ``from'' address. It
# can be overridden using ``my_hdr'' (including from a ``send-hook'') and
# $reverse_name. This variable is ignored if $use_from is unset.
#
# If not specified, then it may be read from the environment variable $EMAIL.
#
#
# set from_chars=""
#
# Name: from_chars
# Type: string
# Default: ""
#
#
# Controls the character used to prefix the %F and %L fields in the
# index.
# Character Description
# 1 Mail is written by you and has a To address, or has a known mailing list in the To address.
# 2 Mail is written by you and has a Cc address, or has a known mailing list in the Cc address.
# 3 Mail is written by you and has a Bcc address.
# 4 All remaining cases.
#
#
# If this is empty or unset (default), the traditional long "To ",
# "Cc " and "Bcc " prefixes are used. If set but too short to
# include a character for a particular case, a single space will be
# prepended to the field. To prevent any prefix at all from being
# added in a particular case, use the special value CR (aka ^M)
# for the corresponding character.
#
# This slightly odd interface is necessitated by NeoMutt's handling of
# string variables; one cannot tell a variable that is unset from one
# that is set to the empty string.
#
#
# set gecos_mask="^[^,]*"
#
# Name: gecos_mask
# Type: regular expression
# Default: "^[^,]*"
#
#
# A regular expression used by NeoMutt to parse the GECOS field of a password
# entry when expanding the alias. The default value
# will return the string up to the first ``,'' encountered.
# If the GECOS field contains a string like ``lastname, firstname'' then you
# should set it to ``.*''.
#
# This can be useful if you see the following behavior: you address an e-mail
# to user ID ``stevef'' whose full name is ``Steve Franklin''. If NeoMutt expands
# ``stevef'' to ``"Franklin" stevef@foo.bar'' then you should set the $gecos_mask to
# a regular expression that will match the whole name so NeoMutt will expand
# ``Franklin'' to ``Franklin, Steve''.
#
#
# set group_index_format="%4C %M%N %5s %-45.45f %d"
#
# Name: group_index_format
# Type: string
# Default: "%4C %M%N %5s %-45.45f %d"
#
#
# This variable allows you to customize the newsgroup browser display to
# your personal taste. This string is similar to ``index_format'', but
# has its own set of printf()-like sequences:
# %C Current newsgroup number
# %d Description of newsgroup (becomes from server)
# %f Newsgroup name
# %M - if newsgroup not allowed for direct post (moderated for example)
# %N N if newsgroup is new, u if unsubscribed, blank otherwise
# %n Number of new articles in newsgroup
# %s Number of unread articles in newsgroup
# %>X Right justify the rest of the string and pad with character "X"
# %|X Pad to the end of the line with character "X"
#
#
# set hdrs=yes
#
# Name: hdrs
# Type: boolean
# Default: yes
#
#
# When unset, the header fields normally added by the ``my_hdr''
# command are not created. This variable must be unset before
# composing a new message or replying in order to take effect. If set,
# the user defined header fields are added to every new message.
#
#
# set header=no
#
# Name: header
# Type: boolean
# Default: no
#
#
# When set, this variable causes NeoMutt to include the header
# of the message you are replying to into the edit buffer.
# The $weed setting applies.
#
#
set header_cache="~/.cache/neomutt"
#
# Name: header_cache
# Type: path
# Default: ""
#
#
# This variable points to the header cache database.
# If pointing to a directory NeoMutt will contain a header cache
# database file per folder, if pointing to a file that file will
# be a single global header cache. By default it is unset so no header
# caching will be used.
#
# Header caching can greatly improve speed when opening POP, IMAP
# MH or Maildir folders, see ``caching'' for details.
#
#
# set header_cache_backend=0
#
# Name: header_cache_backend
# Type: -none-
# Default: 0
#
#
# This variable specifies the header cache backend.
#
#
# set header_cache_compress=yes
#
# Name: header_cache_compress
# Type: boolean
# Default: yes
#
#
# When NeoMutt is compiled with qdbm, tokyocabinet or kyotocabinet
# as header cache backend, this option determines whether the
# database will be compressed. Compression results in database
# files roughly being one fifth of the usual diskspace, but the
# decompression can result in a slower opening of cached folder(s)
# which in general is still much faster than opening non header
# cached folders.
#
#
# set header_cache_pagesize="16384"
#
# Name: header_cache_pagesize
# Type: string
# Default: "16384"
#
#
# When NeoMutt is compiled with either gdbm or bdb4 as the header cache backend,
# this option changes the database page size. Too large or too small
# values can waste space, memory, or CPU time. The default should be more
# or less optimal for most use cases.
#
#
# set header_color_partial=no
#
# Name: header_color_partial
# Type: boolean
# Default: no
#
#
# When set, color header regexes behave like color body regexes:
# color is applied to the exact text matched by the regex. When
# unset, color is applied to the entire header.
#
# One use of this option might be to apply color to just the header labels.
#
# See ``color'' for more details.
#
#
# set help=yes
#
# Name: help
# Type: boolean
# Default: yes
#
#
# When set, help lines describing the bindings for the major functions
# provided by each menu are displayed on the first line of the screen.
#
# Note: The binding will not be displayed correctly if the
# function is bound to a sequence rather than a single keystroke. Also,
# the help line may not be updated if a binding is changed while NeoMutt is
# running. Since this variable is primarily aimed at new users, neither
# of these should present a major problem.
#
#
# set hidden_host=no
#
# Name: hidden_host
# Type: boolean
# Default: no
#
#
# When set, NeoMutt will skip the host name part of $hostname variable
# when adding the domain part to addresses. This variable does not
# affect the generation of Message-IDs, and it will not lead to the
# cut-off of first-level domains.
#
#
# set hidden_tags="unread,draft,flagged,passed,replied,attachment,signed,encrypted"
#
# Name: hidden_tags
# Type: string
# Default: "unread,draft,flagged,passed,replied,attachment,signed,encrypted"
#
#
# This variable specifies private notmuch/imap tags which should not be printed
# on screen.
#
#
# set hide_limited=no
#
# Name: hide_limited
# Type: boolean
# Default: no
#
#
# When set, NeoMutt will not show the presence of messages that are hidden
# by limiting, in the thread tree.
#
#
# set hide_missing=yes
#
# Name: hide_missing
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will not show the presence of missing messages in the
# thread tree.
#
#
# set hide_thread_subject=yes
#
# Name: hide_thread_subject
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will not show the subject of messages in the thread
# tree that have the same subject as their parent or closest previously
# displayed sibling.
#
#
# set hide_top_limited=no
#
# Name: hide_top_limited
# Type: boolean
# Default: no
#
#
# When set, NeoMutt will not show the presence of messages that are hidden
# by limiting, at the top of threads in the thread tree. Note that when
# $hide_limited is set, this option will have no effect.
#
#
# set hide_top_missing=yes
#
# Name: hide_top_missing
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will not show the presence of missing messages at the
# top of threads in the thread tree. Note that when $hide_missing is
# set, this option will have no effect.
#
#
# set history=10
#
# Name: history
# Type: number
# Default: 10
#
#
# This variable controls the size (in number of strings remembered) of
# the string history buffer per category. The buffer is cleared each time the
# variable is set.
#
#
# set history_file="~/.mutthistory"
#
# Name: history_file
# Type: path
# Default: "~/.mutthistory"
#
#
# The file in which NeoMutt will save its history.
#
# Also see $save_history.
#
#
# set history_remove_dups=no
#
# Name: history_remove_dups
# Type: boolean
# Default: no
#
#
# When set, all of the string history will be scanned for duplicates
# when a new entry is added. Duplicate entries in the $history_file will
# also be removed when it is periodically compacted.
#
#
# set honor_disposition=no
#
# Name: honor_disposition
# Type: boolean
# Default: no
#
#
# When set, NeoMutt will not display attachments with a
# disposition of ``attachment'' inline even if it could
# render the part to plain text. These MIME parts can only
# be viewed from the attachment menu.
#
# If unset, NeoMutt will render all MIME parts it can
# properly transform to plain text.
#
#
# set honor_followup_to=yes
#
# Name: honor_followup_to
# Type: quadoption
# Default: yes
#
#
# This variable controls whether or not a Mail-Followup-To header is
# honored when group-replying to a message.
#
#
# set hostname=""
#
# Name: hostname
# Type: string
# Default: ""
#
#
# Specifies the fully-qualified hostname of the system NeoMutt is running on
# containing the host's name and the DNS domain it belongs to. It is used
# as the domain part (after ``@'') for local email addresses as well as
# Message-Id headers.
#
# If not specified in a config file, then NeoMutt will try to determine the hostname itself.
#
# Optionally, NeoMutt can be compiled with a fixed domain name.
#
# Also see $use_domain and $hidden_host.
#
#
# set idn_decode=yes
#
# Name: idn_decode
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will show you international domain names decoded.
# Note: You can use IDNs for addresses even if this is unset.
# This variable only affects decoding. (IDN only)
#
#
# set idn_encode=yes
#
# Name: idn_encode
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will encode international domain names using
# IDN. Unset this if your SMTP server can handle newer (RFC6531)
# UTF-8 encoded domains. (IDN only)
#
#
# set ignore_list_reply_to=no
#
# Name: ignore_list_reply_to
# Type: boolean
# Default: no
#
#
# Affects the behavior of the <reply> function when replying to
# messages from mailing lists (as defined by the ``subscribe'' or
# ``lists'' commands). When set, if the ``Reply-To:'' field is
# set to the same value as the ``To:'' field, NeoMutt assumes that the
# ``Reply-To:'' field was set by the mailing list to automate responses
# to the list, and will ignore this field. To direct a response to the
# mailing list when this option is set, use the <list-reply>
# function; <group-reply> will reply to both the sender and the
# list.
#
#
# set imap_authenticators=""
#
# Name: imap_authenticators
# Type: string
# Default: ""
#
#
# This is a colon-delimited list of authentication methods NeoMutt may
# attempt to use to log in to an IMAP server, in the order NeoMutt should
# try them. Authentication methods are either ``login'' or the right
# side of an IMAP ``AUTH=xxx'' capability string, e.g. ``digest-md5'', ``gssapi''
# or ``cram-md5''. This option is case-insensitive. If it's
# unset (the default) NeoMutt will try all available methods,
# in order from most-secure to least-secure.
#
# Example:
# set imap_authenticators="gssapi:cram-md5:login"
#
# Note: NeoMutt will only fall back to other authentication methods if
# the previous methods are unavailable. If a method is available but
# authentication fails, NeoMutt will not connect to the IMAP server.
#
#
# set imap_check_subscribed=no
#
# Name: imap_check_subscribed
# Type: boolean
# Default: no
#
#
# When set, NeoMutt will fetch the set of subscribed folders from
# your server whenever a mailbox is selected, and add them to the set
# of mailboxes it polls for new mail just as if you had issued individual
# ``mailboxes'' commands.
#
#
# set imap_delim_chars="/."
#
# Name: imap_delim_chars
# Type: string
# Default: "/."
#
#
# This contains the list of characters which you would like to treat
# as folder separators for displaying IMAP paths. In particular it
# helps in using the ``='' shortcut for your folder variable.
#
#
# set imap_headers=""
#
# Name: imap_headers
# Type: string
# Default: ""
#
#
# NeoMutt requests these header fields in addition to the default headers
# (``Date:'', ``From:'', ``Subject:'', ``To:'', ``Cc:'', ``Message-Id:'',
# ``References:'', ``Content-Type:'', ``Content-Description:'', ``In-Reply-To:'',
# ``Reply-To:'', ``Lines:'', ``List-Post:'', ``X-Label:'') from IMAP
# servers before displaying the index menu. You may want to add more
# headers for spam detection.
#
# Note: This is a space separated list, items should be uppercase
# and not contain the colon, e.g. ``X-BOGOSITY X-SPAM-STATUS'' for the
# ``X-Bogosity:'' and ``X-Spam-Status:'' header fields.
#
#
# set imap_idle=no
#
# Name: imap_idle
# Type: boolean
# Default: no
#
#
# When set, NeoMutt will attempt to use the IMAP IDLE extension
# to check for new mail in the current mailbox. Some servers
# (dovecot was the inspiration for this option) react badly
# to NeoMutt's implementation. If your connection seems to freeze
# up periodically, try unsetting this.
#
#
# set imap_keepalive=300
#
# Name: imap_keepalive
# Type: number
# Default: 300
#
#
# This variable specifies the maximum amount of time in seconds that NeoMutt
# will wait before polling open IMAP connections, to prevent the server
# from closing them before NeoMutt has finished with them. The default is
# well within the RFC-specified minimum amount of time (30 minutes) before
# a server is allowed to do this, but in practice the RFC does get
# violated every now and then. Reduce this number if you find yourself
# getting disconnected from your IMAP server due to inactivity.
#
#
# set imap_list_subscribed=no
#
# Name: imap_list_subscribed
# Type: boolean
# Default: no
#
#
# This variable configures whether IMAP folder browsing will look for
# only subscribed folders or all folders. This can be toggled in the
# IMAP browser with the <toggle-subscribed> function.
#
#
# set imap_login=""
#
# Name: imap_login
# Type: string
# Default: ""
#
#
# Your login name on the IMAP server.
#
# This variable defaults to the value of $imap_user.
#
#
set imap_pass=$my_pass
#
# Name: imap_pass
# Type: string
# Default: ""
#
#
# Specifies the password for your IMAP account. If unset, NeoMutt will
# prompt you for your password when you invoke the <imap-fetch-mail> function
# or try to open an IMAP folder.
#
# Warning: you should only use this option when you are on a
# fairly secure machine, because the superuser can read your neomuttrc even
# if you are the only one who can read the file.
#
#
set imap_passive=yes
#
# Name: imap_passive
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will not open new IMAP connections to check for new
# mail. NeoMutt will only check for new mail over existing IMAP
# connections. This is useful if you don't want to be prompted to
# user/password pairs on NeoMutt invocation, or if opening the connection
# is slow.
#
#
# set imap_peek=yes
#
# Name: imap_peek
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will avoid implicitly marking your mail as read whenever
# you fetch a message from the server. This is generally a good thing,
# but can make closing an IMAP folder somewhat slower. This option
# exists to appease speed freaks.
#
#
# set imap_pipeline_depth=15
#
# Name: imap_pipeline_depth
# Type: number
# Default: 15
#
#
# Controls the number of IMAP commands that may be queued up before they
# are sent to the server. A deeper pipeline reduces the amount of time
# NeoMutt must wait for the server, and can make IMAP servers feel much
# more responsive. But not all servers correctly handle pipelined commands,
# so if you have problems you might want to try setting this variable to 0.
#
# Note: Changes to this variable have no effect on open connections.
#
#
# set imap_poll_timeout=15
#
# Name: imap_poll_timeout
# Type: number
# Default: 15
#
#
# This variable specifies the maximum amount of time in seconds
# that NeoMutt will wait for a response when polling IMAP connections
# for new mail, before timing out and closing the connection. Set
# to 0 to disable timing out.
#
#
# set imap_servernoise=yes
#
# Name: imap_servernoise
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will display warning messages from the IMAP
# server as error messages. Since these messages are often
# harmless, or generated due to configuration problems on the
# server which are out of the users' hands, you may wish to suppress
# them at some point.
#
#
set imap_user="$my_email"
#
# Name: imap_user
# Type: string
# Default: ""
#
#
# The name of the user whose mail you intend to access on the IMAP
# server.
#
# This variable defaults to your user name on the local machine.
#
#
# set implicit_autoview=no
#
# Name: implicit_autoview
# Type: boolean
# Default: no
#
#
# If set to ``yes'', NeoMutt will look for a mailcap entry with the
# ``copiousoutput'' flag set for every MIME attachment it doesn't have
# an internal viewer defined for. If such an entry is found, NeoMutt will
# use the viewer defined in that entry to convert the body part to text
# form.
#
#
# set include=ask-yes
#
# Name: include
# Type: quadoption
# Default: ask-yes
#
#
# Controls whether or not a copy of the message(s) you are replying to
# is included in your reply.
#
#
# set include_onlyfirst=no
#
# Name: include_onlyfirst
# Type: boolean
# Default: no
#
#
# Controls whether or not NeoMutt includes only the first attachment
# of the message you are replying.
#
#
# set indent_string="> "
#
# Name: indent_string
# Type: string
# Default: "> "
#
#
# Specifies the string to prepend to each line of text quoted in a
# message to which you are replying. You are strongly encouraged not to
# change this value, as it tends to agitate the more fanatical netizens.
#
# The value of this option is ignored if $text_flowed is set, because
# the quoting mechanism is strictly defined for format=flowed.
#
# This option is a format string, please see the description of
# $index_format for supported printf(3)-style sequences.
#
#
# set index_format="%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
#
# Name: index_format
# Type: string
# Default: "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
#
#
# This variable allows you to customize the message index display to
# your personal taste.
#
# ``Format strings'' are similar to the strings used in the C
# function printf(3) to format output (see the man page for more details).
# For an explanation of the %? construct, see the status_format description.
# The following sequences are defined in NeoMutt:
# %a Address of the author
# %A Reply-to address (if present; otherwise: address of author)
# %b Filename of the original message folder (think mailbox)
# %B The list to which the letter was sent, or else the folder name (%b).
# %C Current message number
# %c Number of characters (bytes) in the message
# %D Date and time of message using date_format and local timezone
# %d Date and time of message using date_format and sender's timezone
# %e Current message number in thread
# %E Number of messages in current thread
# %F Author name, or recipient name if the message is from you
# %f Sender (address + real name), either From: or Return-Path:
# %g Newsgroup name (if compiled with NNTP support)
# %g Message tags (e.g. notmuch tags/imap flags)
# %Gx Individual message tag (e.g. notmuch tags/imap flags)
# %H Spam attribute(s) of this message
# %I Initials of author
# %i Message-id of the current message
# %J Message tags (if present, tree unfolded, and != parent's tags)
# %K The list to which the letter was sent (if any; otherwise: empty)
# %L If an address in the ``To:'' or ``Cc:'' header field matches an address
# Defined by the users ``subscribe'' command, this displays
# "To <list-name>", otherwise the same as %F
# %l Number of lines in the message (does not work with maildir,
# Mh, and possibly IMAP folders)
# %M Number of hidden messages if the thread is collapsed
# %m Total number of message in the mailbox
# %N Message score
# %n Author's real name (or address if missing)
# %O Original save folder where NeoMutt would formerly have
# Stashed the message: list name or recipient name
# If not sent to a list
# %P Progress indicator for the built-in pager (how much of the file has been displayed)
# %q Newsgroup name (if compiled with NNTP support)
# %R Comma separated list of ``Cc:'' recipients
# %r Comma separated list of ``To:'' recipients
# %S Single character status of the message (``N''/``O''/``D''/``d''/``!''/``r''/``*'')
# %s Subject of the message
# %T The appropriate character from the $to_chars string
# %t ``To:'' field (recipients)
# %u User (login) name of the author
# %v First name of the author, or the recipient if the message is from you
# %W Name of organization of author (``Organization:'' field)
# %x ``X-Comment-To:'' field (if present and compiled with NNTP support)
# %X Number of MIME attachments
# (please see the ``attachments'' section for possible speed effects)
# %Y ``X-Label:'' field, if present, and (1) not at part of a thread tree,
# (2) at the top of a thread, or (3) ``X-Label:'' is different from
# Preceding message's ``X-Label:''
# %y ``X-Label:'' field, if present
# %Z A three character set of message status flags.
# The first character is new/read/replied flags (``n''/``o''/``r''/``O''/``N'').
# The second is deleted or encryption flags (``D''/``d''/``S''/``P''/``s''/``K'').
# The third is either tagged/flagged (``*''/``!''), or one of the characters
# Listed in $to_chars.
# %zc Message crypto flags
# %zs Message status flags
# %zt Message tag flags
# %{fmt} the date and time of the message is converted to sender's
# time zone, and ``fmt'' is expanded by the library function
# strftime(3); a leading bang disables locales
# %[fmt] the date and time of the message is converted to the local
# time zone, and ``fmt'' is expanded by the library function
# strftime(3); a leading bang disables locales
# %(fmt) the local date and time when the message was received.
# ``fmt'' is expanded by the library function strftime(3);
# a leading bang disables locales
# %>X right justify the rest of the string and pad with character ``X''
# %|X pad to the end of the line with character ``X''
# %*X soft-fill with character ``X'' as pad
#
#
# Date format expressions can be constructed based on relative dates. Using
# the date formatting operators along with nested conditionals, the date
# format can be modified based on how old a message is. See the section on
# ``Conditional Dates'' for an explanation and examples
# ``Soft-fill'' deserves some explanation: Normal right-justification
# will print everything to the left of the ``%>'', displaying padding and
# whatever lies to the right only if there's room. By contrast,
# soft-fill gives priority to the right-hand side, guaranteeing space
# to display it and showing padding only if there's still room. If
# necessary, soft-fill will eat text leftwards to make room for
# rightward text.
#
# Note that these expandos are supported in
# ``save-hook'', ``fcc-hook'' and ``fcc-save-hook'', too.
#
#
# set inews=""
#
# Name: inews
# Type: command
# Default: ""
#
#
# If set, specifies the program and arguments used to deliver news posted
# by NeoMutt. Otherwise, NeoMutt posts article using current connection to
# news server. The following printf-style sequence is understood:
# %a account url
# %p port
# %P port if specified
# %s news server name
# %S url schema
# %u username
#
#
# Example:
# set inews="/usr/local/bin/inews -hS"
#
#
# set ispell="ispell"
#
# Name: ispell
# Type: command
# Default: "ispell"
#
#
# How to invoke ispell (GNU's spell-checking software).
#
#
# set keep_flagged=no
#
# Name: keep_flagged
# Type: boolean
# Default: no
#
#
# If set, read messages marked as flagged will not be moved
# from your spool mailbox to your $mbox mailbox, or as a result of
# a ``mbox-hook'' command.
#
#
set mail_check=5
#
# Name: mail_check
# Type: number
# Default: 5
#
#
# This variable configures how often (in seconds) NeoMutt should look for
# new mail. Also see the $timeout variable.
#
#
# set mail_check_recent=yes
#
# Name: mail_check_recent
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will only notify you about new mail that has been received
# since the last time you opened the mailbox. When unset, NeoMutt will notify you
# if any new mail exists in the mailbox, regardless of whether you have visited it
# recently.
#
# When $mark_old is set, NeoMutt does not consider the mailbox to contain new
# mail if only old messages exist.
#
#
# set mail_check_stats=no
#
# Name: mail_check_stats
# Type: boolean
# Default: no
#
#
# When set, NeoMutt will periodically calculate message
# statistics of a mailbox while polling for new mail. It will
# check for unread, flagged, and total message counts. Because
# this operation is more performance intensive, it defaults to
# unset, and has a separate option, $mail_check_stats_interval, to
# control how often to update these counts.
#
# Message statistics can also be explicitly calculated by invoking the
# <check-stats> function.
#
#
# set mail_check_stats_interval=60
#
# Name: mail_check_stats_interval
# Type: number
# Default: 60
#
#
# When $mail_check_stats is set, this variable configures
# how often (in seconds) NeoMutt will update message counts.
#
#
# set mailcap_path="~/.mailcap:/usr/share/neomutt/mailcap:/etc/mailcap:/etc/mailcap:/usr/etc/mailcap:/usr/local/etc/mailcap"
#
# Name: mailcap_path
# Type: string
# Default: "~/.mailcap:/usr/share/neomutt/mailcap:/etc/mailcap:/etc/mailcap:/usr/etc/mailcap:/usr/local/etc/mailcap"
#
#
# This variable specifies which files to consult when attempting to
# display MIME bodies not directly supported by NeoMutt.
#
# $mailcap_path is overridden by the environment variable $MAILCAPS.
#
# The default search path is from RFC1524.
#
#
# set mailcap_sanitize=yes
#
# Name: mailcap_sanitize
# Type: boolean
# Default: yes
#
#
# If set, NeoMutt will restrict possible characters in mailcap % expandos
# to a well-defined set of safe characters. This is the safe setting,
# but we are not sure it doesn't break some more advanced MIME stuff.
#
# DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE
# DOING!
#
#
# set maildir_check_cur=no
#
# Name: maildir_check_cur
# Type: boolean
# Default: no
#
#
# If set, NeoMutt will poll both the new and cur directories of
# a maildir folder for new messages. This might be useful if other
# programs interacting with the folder (e.g. dovecot) are moving new
# messages to the cur directory. Note that setting this option may
# slow down polling for new messages in large folders, since NeoMutt has
# to scan all cur messages.
#
#
# set maildir_header_cache_verify=yes
#
# Name: maildir_header_cache_verify
# Type: boolean
# Default: yes
#
#
# Check for Maildir unaware programs other than NeoMutt having modified maildir
# files when the header cache is in use. This incurs one stat(2) per
# message every time the folder is opened (which can be very slow for NFS
# folders).
#
#
# set maildir_trash=no
#
# Name: maildir_trash
# Type: boolean
# Default: no
#
#
# If set, messages marked as deleted will be saved with the maildir
# trashed flag instead of unlinked. Note: this only applies
# to maildir-style mailboxes. Setting it will have no effect on other
# mailbox types.
#
#
# set mark_macro_prefix="'"
#
# Name: mark_macro_prefix
# Type: string
# Default: "'"
#
#
# Prefix for macros created using mark-message. A new macro
# automatically generated with <mark-message>a will be composed
# from this prefix and the letter a.
#
#
# set mark_old=yes
#
# Name: mark_old
# Type: boolean
# Default: yes
#
#
# Controls whether or not NeoMutt marks new unread
# messages as old if you exit a mailbox without reading them.
# With this option set, the next time you start NeoMutt, the messages
# will show up with an ``O'' next to them in the index menu,
# indicating that they are old.
#
#
# set markers=yes
#
# Name: markers
# Type: boolean
# Default: yes
#
#
# Controls the display of wrapped lines in the internal pager. If set, a
# ``+'' marker is displayed at the beginning of wrapped lines.
#
# Also see the $smart_wrap variable.
#
#
# set mask="&Mask,IP!^\\.[^.]"
#
# Name: mask
# Type: regular expression
# Default: "&Mask,IP!^\\.[^.]"
#
#
# A regular expression used in the file browser, optionally preceded by
# the not operator ``!''. Only files whose names match this mask
# will be shown. The match is always case-sensitive.
#
#
# set mbox="~/mbox"
#
# Name: mbox
# Type: path
# Default: "~/mbox"
#
#
# This specifies the folder into which read mail in your $spoolfile
# folder will be appended.
#
# Also see the $move variable.
#
#
# set mbox_type=mbox
#
# Name: mbox_type
# Type: folder magic
# Default: mbox
#
#
# The default mailbox type used when creating new folders. May be any of
# ``mbox'', ``MMDF'', ``MH'' or ``Maildir''.
#
# This can also be set using the -m command-line option.
#
#
# set menu_context=0
#
# Name: menu_context
# Type: number
# Default: 0
#
#
# This variable controls the number of lines of context that are given
# when scrolling through menus. (Similar to $pager_context.)
#
#
# set menu_move_off=yes
#
# Name: menu_move_off
# Type: boolean
# Default: yes
#
#
# When unset, the bottom entry of menus will never scroll up past
# the bottom of the screen, unless there are less entries than lines.
# When set, the bottom entry may move off the bottom.
#
#
# set menu_scroll=no
#
# Name: menu_scroll
# Type: boolean
# Default: no
#
#
# When set, menus will be scrolled up or down one line when you
# attempt to move across a screen boundary. If unset, the screen
# is cleared and the next or previous page of the menu is displayed
# (useful for slow links to avoid many redraws).
#
#
# set message_cache_clean=no
#
# Name: message_cache_clean
# Type: boolean
# Default: no
#
#
# If set, NeoMutt will clean out obsolete entries from the message cache when
# the mailbox is synchronized. You probably only want to set it
# every once in a while, since it can be a little slow
# (especially for large folders).
#
#
set message_cachedir="~/.cache/neomutt/messages"
#
# Name: message_cachedir
# Type: path
# Default: ""
#
#
# Set this to a directory and NeoMutt will cache copies of messages from
# your IMAP and POP servers here. You are free to remove entries at any
# time.
#
# When setting this variable to a directory, NeoMutt needs to fetch every
# remote message only once and can perform regular expression searches
# as fast as for local folders.
#
# Also see the $message_cache_clean variable.
#
#
# set message_format="%s"
#
# Name: message_format
# Type: string
# Default: "%s"
#
#
# This is the string displayed in the ``attachment'' menu for
# attachments of type message/rfc822. For a full listing of defined
# printf(3)-like sequences see the section on $index_format.
#
#
# set meta_key=no
#
# Name: meta_key
# Type: boolean
# Default: no
#
#
# If set, forces NeoMutt to interpret keystrokes with the high bit (bit 8)
# set as if the user had pressed the Esc key and whatever key remains
# after having the high bit removed. For example, if the key pressed
# has an ASCII value of 0xf8, then this is treated as if the user had
# pressed Esc then ``x''. This is because the result of removing the
# high bit from 0xf8 is 0x78, which is the ASCII character
# ``x''.
#
#
# set metoo=no
#
# Name: metoo
# Type: boolean
# Default: no
#
#
# If unset, NeoMutt will remove your address (see the ``alternates''
# command) from the list of recipients when replying to a message.
#
#
# set mh_purge=no
#
# Name: mh_purge
# Type: boolean
# Default: no
#
#
# When unset, NeoMutt will mimic mh's behavior and rename deleted messages
# to ,<old file name> in mh folders instead of really deleting
# them. This leaves the message on disk but makes programs reading the folder
# ignore it. If the variable is set, the message files will simply be
# deleted.
#
# This option is similar to $maildir_trash for Maildir folders.
#
#
# set mh_seq_flagged="flagged"
#
# Name: mh_seq_flagged
# Type: string
# Default: "flagged"
#
#
# The name of the MH sequence used for flagged messages.
#
#
# set mh_seq_replied="replied"
#
# Name: mh_seq_replied
# Type: string
# Default: "replied"
#
#
# The name of the MH sequence used to tag replied messages.
#
#
# set mh_seq_unseen="unseen"
#
# Name: mh_seq_unseen
# Type: string
# Default: "unseen"
#
#
# The name of the MH sequence used for unseen messages.
#
#
# set mime_forward=no
#
# Name: mime_forward
# Type: quadoption
# Default: no
#
#
# When set, the message you are forwarding will be attached as a
# separate message/rfc822 MIME part instead of included in the main body of the
# message. This is useful for forwarding MIME messages so the receiver
# can properly view the message as it was delivered to you. If you like
# to switch between MIME and not MIME from mail to mail, set this
# variable to ``ask-no'' or ``ask-yes''.
#
# Also see $forward_decode and $mime_forward_decode.
#
#
# set mime_forward_decode=no
#
# Name: mime_forward_decode
# Type: boolean
# Default: no
#
#
# Controls the decoding of complex MIME messages into text/plain when
# forwarding a message while $mime_forward is set. Otherwise
# $forward_decode is used instead.
#
#
# set mime_forward_rest=yes
#
# Name: mime_forward_rest
# Type: quadoption
# Default: yes
#
#
# When forwarding multiple attachments of a MIME message from the attachment
# menu, attachments which cannot be decoded in a reasonable manner will
# be attached to the newly composed message if this option is set.
#
#
# set mime_subject=yes
#
# Name: mime_subject
# Type: boolean
# Default: yes
#
#
# If unset, 8-bit ``subject:'' line in article header will not be
# encoded according to RFC2047 to base64. This is useful when message
# is Usenet article, because MIME for news is nonstandard feature.
#
#
# set mime_type_query_command=""
#
# Name: mime_type_query_command
# Type: command
# Default: ""
#
#
# This specifies a command to run, to determine the mime type of a
# new attachment when composing a message. Unless
# $mime_type_query_first is set, this will only be run if the
# attachment's extension is not found in the mime.types file.
#
# The string may contain a ``%s'', which will be substituted with the
# attachment filename. NeoMutt will add quotes around the string substituted
# for ``%s'' automatically according to shell quoting rules, so you should
# avoid adding your own. If no ``%s'' is found in the string, NeoMutt will
# append the attachment filename to the end of the string.
#
# The command should output a single line containing the
# attachment's mime type.
#
# Suggested values are ``xdg-mime query filetype'' or
# ``file -bi''.
#
#
# set mime_type_query_first=no
#
# Name: mime_type_query_first
# Type: boolean
# Default: no
#
#
# When set, the $mime_type_query_command will be run before the
# mime.types lookup.
#
#
# set move=no
#
# Name: move
# Type: quadoption
# Default: no
#
#
# Controls whether or not NeoMutt will move read messages
# from your spool mailbox to your $mbox mailbox, or as a result of
# a ``mbox-hook'' command.
#
#
# set narrow_tree=no
#
# Name: narrow_tree
# Type: boolean
# Default: no
#
#
# This variable, when set, makes the thread tree narrower, allowing
# deeper threads to fit on the screen.
#
#
# set net_inc=10
#
# Name: net_inc
# Type: number
# Default: 10
#
#
# Operations that expect to transfer a large amount of data over the
# network will update their progress every $net_inc kilobytes.
# If set to 0, no progress messages will be displayed.
#
# See also $read_inc, $write_inc and $net_inc.
#
#
set new_mail_command="notify-send \
'New Email' '%n new messages, %u unread.' &"
#
# Name: new_mail_command
# Type: command
# Default: ""
#
#
# If set, NeoMutt will call this command after a new message is received.
# See the $status_format documentation for the values that can be formatted
# into this command.
#
#
# set news_cache_dir="~/.neomutt"
#
# Name: news_cache_dir
# Type: path
# Default: "~/.neomutt"
#
#
# This variable pointing to directory where NeoMutt will save cached news
# articles and headers in. If unset, articles and headers will not be
# saved at all and will be reloaded from the server each time.
#
#
# set news_server=""
#
# Name: news_server
# Type: string
# Default: ""
#
#
# This variable specifies domain name or address of NNTP server.
#
# You can also specify username and an alternative port for each news server,
# e.g. [[s]news://][username[:password]@]server[:port]
#
# This option can also be set using the command line option ``-g'', the
# environment variable $NNTPSERVER, or putting the server name in the
# file ``/etc/nntpserver''.
#
#
# set newsgroups_charset="utf-8"
#
# Name: newsgroups_charset
# Type: string
# Default: "utf-8"
#
#
# Character set of newsgroups descriptions.
#
#
# set newsrc="~/.newsrc"
#
# Name: newsrc
# Type: path
# Default: "~/.newsrc"
#
#
# The file, containing info about subscribed newsgroups - names and
# indexes of read articles. The following printf-style sequence
# is understood:
# %a Account url
# %p Port
# %P Port if specified
# %s News server name
# %S Url schema
# %u Username
#
#
# set nm_db_limit=0
#
# Name: nm_db_limit
# Type: number
# Default: 0
#
#
# This variable specifies the default limit used in notmuch queries.
#
#
# set nm_default_uri=""
#
# Name: nm_default_uri
# Type: string
# Default: ""
#
#
# This variable specifies the default Notmuch database in format
# notmuch://<absolute path>.
#
#
# set nm_exclude_tags=""
#
# Name: nm_exclude_tags
# Type: string
# Default: ""
#
#
# The messages tagged with these tags are excluded and not loaded
# from notmuch DB to NeoMutt unless specified explicitly.
#
#
# set nm_open_timeout=5
#
# Name: nm_open_timeout
# Type: number
# Default: 5
#
#
# This variable specifies the timeout for database open in seconds.
#
#
# set nm_query_type="messages"
#
# Name: nm_query_type
# Type: string
# Default: "messages"
#
#
# This variable specifies the default query type (threads or messages) used in notmuch queries.
#
#
# set nm_query_window_current_position=0
#
# Name: nm_query_window_current_position
# Type: number
# Default: 0
#
#
# This variable contains the currently setup notmuch search for window based vfolder.
#
#
# set nm_query_window_current_search=""
#
# Name: nm_query_window_current_search
# Type: string
# Default: ""
#
#
# This variable sets the time duration of a windowed notmuch query.
# Accepted values all non negative integers. A value of 0 disables the feature.
#
#
# set nm_query_window_duration=0
#
# Name: nm_query_window_duration
# Type: number
# Default: 0
#
#
# This variable sets the time duration of a windowed notmuch query.
# Accepted values all non negative integers. A value of 0 disables the feature.
#
#
# set nm_query_window_timebase="week"
#
# Name: nm_query_window_timebase
# Type: string
# Default: "week"
#
#
# This variable sets the time base of a windowed notmuch query.
# Accepted values are 'minute', 'hour', 'day', 'week', 'month', 'year'
#
#
# set nm_record=no
#
# Name: nm_record
# Type: boolean
# Default: no
#
#
# This variable specifies if the NeoMutt record should indexed by notmuch.
#
#
# set nm_record_tags=""
#
# Name: nm_record_tags
# Type: string
# Default: ""
#
#
# This variable specifies the default tags applied to messages stored to the NeoMutt record.
# When set to 0 this variable disable the window feature.
#
#
# set nm_unread_tag="unread"
#
# Name: nm_unread_tag
# Type: string
# Default: "unread"
#
#
# This variable specifies notmuch tag which is used for unread messages. The
# variable is used to count unread messages in DB only. All other NeoMutt commands
# use standard (e.g. maildir) flags.
#
#
# set nntp_authenticators=""
#
# Name: nntp_authenticators
# Type: string
# Default: ""
#
#
# This is a colon-delimited list of authentication methods NeoMutt may
# attempt to use to log in to a news server, in the order NeoMutt should
# try them. Authentication methods are either ``user'' or any
# SASL mechanism, e.g. ``digest-md5'', ``gssapi'' or ``cram-md5''.
# This option is case-insensitive. If it's unset (the default)
# NeoMutt will try all available methods, in order from most-secure to
# least-secure.
#
# Example:
# set nntp_authenticators="digest-md5:user"
#
# Note: NeoMutt will only fall back to other authentication methods if
# the previous methods are unavailable. If a method is available but
# authentication fails, NeoMutt will not connect to the IMAP server.
#
#
# set nntp_context=1000
#
# Name: nntp_context
# Type: number
# Default: 1000
#
#
# This variable defines number of articles which will be in index when
# newsgroup entered. If active newsgroup have more articles than this
# number, oldest articles will be ignored. Also controls how many
# articles headers will be saved in cache when you quit newsgroup.
#
#
# set nntp_listgroup=yes
#
# Name: nntp_listgroup
# Type: boolean
# Default: yes
#
#
# This variable controls whether or not existence of each article is
# checked when newsgroup is entered.
#
#
# set nntp_load_description=yes
#
# Name: nntp_load_description
# Type: boolean
# Default: yes
#
#
# This variable controls whether or not descriptions for each newsgroup
# must be loaded when newsgroup is added to list (first time list
# loading or new newsgroup adding).
#
#
# set nntp_pass=""
#
# Name: nntp_pass
# Type: string
# Default: ""
#
#
# Your password for NNTP account.
#
#
# set nntp_poll=60
#
# Name: nntp_poll
# Type: number
# Default: 60
#
#
# The time in seconds until any operations on newsgroup except post new
# article will cause recheck for new news. If set to 0, NeoMutt will
# recheck newsgroup on each operation in index (stepping, read article,
# etc.).
#
#
# set nntp_user=""
#
# Name: nntp_user
# Type: string
# Default: ""
#
#
# Your login name on the NNTP server. If unset and NNTP server requires
# authentication, NeoMutt will prompt you for your account name when you
# connect to news server.
#
#
# set pager="builtin"
#
# Name: pager
# Type: command
# Default: "builtin"
#
#
# This variable specifies which pager you would like to use to view
# messages. The value ``builtin'' means to use the built-in pager, otherwise this
# variable should specify the pathname of the external pager you would
# like to use.
#
# Using an external pager may have some disadvantages: Additional
# keystrokes are necessary because you can't call NeoMutt functions
# directly from the pager, and screen resizes cause lines longer than
# the screen width to be badly formatted in the help menu.
#
#
# set pager_context=0
#
# Name: pager_context
# Type: number
# Default: 0
#
#
# This variable controls the number of lines of context that are given
# when displaying the next or previous page in the internal pager. By
# default, NeoMutt will display the line after the last one on the screen
# at the top of the next page (0 lines of context).
#
# This variable also specifies the amount of context given for search
# results. If positive, this many lines will be given before a match,
# if 0, the match will be top-aligned.
#
#
# set pager_format="-%Z- %C/%m: %-20.20n %s%* -- (%P)"
#
# Name: pager_format
# Type: string
# Default: "-%Z- %C/%m: %-20.20n %s%* -- (%P)"
#
#
# This variable controls the format of the one-line message ``status''
# displayed before each message in either the internal or an external
# pager. The valid sequences are listed in the $index_format
# section.
#
#
# set pager_index_lines=0
#
# Name: pager_index_lines
# Type: number
# Default: 0
#
#
# Determines the number of lines of a mini-index which is shown when in
# the pager. The current message, unless near the top or bottom of the
# folder, will be roughly one third of the way down this mini-index,
# giving the reader the context of a few messages before and after the
# message. This is useful, for example, to determine how many messages
# remain to be read in the current thread. One of the lines is reserved
# for the status bar from the index, so a setting of 6
# will only show 5 lines of the actual index. A value of 0 results in
# no index being shown. If the number of messages in the current folder
# is less than $pager_index_lines, then the index will only use as
# many lines as it needs.
#
#
# set pager_stop=no
#
# Name: pager_stop
# Type: boolean
# Default: no
#
#
# When set, the internal-pager will not move to the next message
# when you are at the end of a message and invoke the <next-page>
# function.
#
#
# set pgp_auto_decode=no
#
# Name: pgp_auto_decode
# Type: boolean
# Default: no
#
#
# If set, NeoMutt will automatically attempt to decrypt traditional PGP
# messages whenever the user performs an operation which ordinarily would
# result in the contents of the message being operated on. For example,
# if the user displays a pgp-traditional message which has not been manually
# checked with the <check-traditional-pgp> function, NeoMutt will automatically
# check the message for traditional pgp.
#
#
# set pgp_autoinline=no
#
# Name: pgp_autoinline
# Type: boolean
# Default: no
#
#
# This option controls whether NeoMutt generates old-style inline
# (traditional) PGP encrypted or signed messages under certain
# circumstances. This can be overridden by use of the pgp menu,
# when inline is not required. The GPGME backend does not support
# this option.
#
# Note that NeoMutt might automatically use PGP/MIME for messages
# which consist of more than a single MIME part. NeoMutt can be
# configured to ask before sending PGP/MIME messages when inline
# (traditional) would not work.
#
# Also see the $pgp_mime_auto variable.
#
# Also note that using the old-style PGP message format is strongly
# deprecated.
# (PGP only)
#
#
# set pgp_check_exit=yes
#
# Name: pgp_check_exit
# Type: boolean
# Default: yes
#
#
# If set, NeoMutt will check the exit code of the PGP subprocess when
# signing or encrypting. A non-zero exit code means that the
# subprocess failed.
# (PGP only)
#
#
# set pgp_check_gpg_decrypt_status_fd=yes
#
# Name: pgp_check_gpg_decrypt_status_fd
# Type: boolean
# Default: yes
#
#
# If set, mutt will check the status file descriptor output
# of $pgp_decrypt_command for GnuPG status codes indicating
# successful decryption. This will check for the presence of
# DECRYPTION_OKAY, absence of DECRYPTION_FAILED, and that all
# PLAINTEXT occurs between the BEGIN_DECRYPTION and END_DECRYPTION
# status codes.
#
# If unset, mutt will instead match the status fd output
# against $pgp_decryption_okay.
# (PGP only)
#
#
# set pgp_clearsign_command=""
#
# Name: pgp_clearsign_command
# Type: command
# Default: ""
#
#
# This format is used to create an old-style ``clearsigned'' PGP
# message. Note that the use of this format is strongly
# deprecated.
#
# This is a format string, see the $pgp_decode_command command for
# possible printf(3)-like sequences.
# (PGP only)
#
#
# set pgp_decode_command=""
#
# Name: pgp_decode_command
# Type: command
# Default: ""
#
#
# This format strings specifies a command which is used to decode
# application/pgp attachments.
#
# The PGP command formats have their own set of printf(3)-like sequences:
# %p Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty
# string otherwise. Note: This may be used with a %? construct.
# %f Expands to the name of a file containing a message.
# %s Expands to the name of a file containing the signature part
# of a multipart/signed attachment when verifying it.
# %a The value of $pgp_sign_as if set, otherwise the value
# of $pgp_default_key.
# %r One or more key IDs (or fingerprints if available).
#
#
# For examples on how to configure these formats for the various versions
# of PGP which are floating around, see the pgp and gpg sample configuration files in
# the samples/ subdirectory which has been installed on your system
# alongside the documentation.
# (PGP only)
#
#
# set pgp_decrypt_command=""
#
# Name: pgp_decrypt_command
# Type: command
# Default: ""
#
#
# This command is used to decrypt a PGP encrypted message.
#
# This is a format string, see the $pgp_decode_command command for
# possible printf(3)-like sequences.
# (PGP only)
#
#
# set pgp_decryption_okay=""
#
# Name: pgp_decryption_okay
# Type: regular expression
# Default: ""
#
#
# If you assign text to this variable, then an encrypted PGP
# message is only considered successfully decrypted if the output
# from $pgp_decrypt_command contains the text. This is used to
# protect against a spoofed encrypted message, with multipart/encrypted
# headers but containing a block that is not actually encrypted.
# (e.g. simply signed and ascii armored text).
#
# Note that if $pgp_check_gpg_decrypt_status_fd is set, this variable
# is ignored.
# (PGP only)
#
#
# set pgp_default_key=""
#
# Name: pgp_default_key
# Type: string
# Default: ""
#
#
# This is the default key-pair to use for PGP operations. It will be
# used for encryption (see $postpone_encrypt and $pgp_self_encrypt).
#
# It will also be used for signing unless $pgp_sign_as is set.
#
# The (now deprecated) pgp_self_encrypt_as is an alias for this
# variable, and should no longer be used.
# (PGP only)
#
#
# set pgp_encrypt_only_command=""
#
# Name: pgp_encrypt_only_command
# Type: command
# Default: ""
#
#
# This command is used to encrypt a body part without signing it.
#
# This is a format string, see the $pgp_decode_command command for
# possible printf(3)-like sequences.
# (PGP only)
#
#
# set pgp_encrypt_sign_command=""
#
# Name: pgp_encrypt_sign_command
# Type: command
# Default: ""
#
#
# This command is used to both sign and encrypt a body part.
#
# This is a format string, see the $pgp_decode_command command for
# possible printf(3)-like sequences.
# (PGP only)
#
#
# set pgp_entry_format="%4n %t%f %4l/0x%k %-4a %2c %u"
#
# Name: pgp_entry_format
# Type: string
# Default: "%4n %t%f %4l/0x%k %-4a %2c %u"
#
#
# This variable allows you to customize the PGP key selection menu to
# your personal taste. This string is similar to $index_format, but
# has its own set of printf(3)-like sequences:
# %a Algorithm
# %c Capabilities
# %f Flags
# %k Key id
# %l Key length
# %n Number
# %p Protocol
# %t Trust/validity of the key-uid association
# %u User id
# %[<s>] Date of the key where <s> is an strftime(3) expression
#
#
# (PGP only)
#
#
# set pgp_export_command=""
#
# Name: pgp_export_command
# Type: command
# Default: ""
#
#
# This command is used to export a public key from the user's
# key ring.
#
# This is a format string, see the $pgp_decode_command command for
# possible printf(3)-like sequences.
# (PGP only)
#
#
# set pgp_getkeys_command=""
#
# Name: pgp_getkeys_command
# Type: command
# Default: ""
#
#
# This command is invoked whenever NeoMutt needs to fetch the public key associated with
# an email address. Of the sequences supported by $pgp_decode_command, %r is
# the only printf(3)-like sequence used with this format. Note that
# in this case, %r expands to the email address, not the public key ID (the key ID is
# unknown, which is why NeoMutt is invoking this command).
# (PGP only)
#
#
# set pgp_good_sign=""
#
# Name: pgp_good_sign
# Type: regular expression
# Default: ""
#
#
# If you assign a text to this variable, then a PGP signature is only
# considered verified if the output from $pgp_verify_command contains
# the text. Use this variable if the exit code from the command is 0
# even for bad signatures.
# (PGP only)
#
#
# set pgp_ignore_subkeys=yes
#
# Name: pgp_ignore_subkeys
# Type: boolean
# Default: yes
#
#
# Setting this variable will cause NeoMutt to ignore OpenPGP subkeys. Instead,
# the principal key will inherit the subkeys' capabilities. Unset this
# if you want to play interesting key selection games.
# (PGP only)
#
#
# set pgp_import_command=""
#
# Name: pgp_import_command
# Type: command
# Default: ""
#
#
# This command is used to import a key from a message into
# the user's public key ring.
#
# This is a format string, see the $pgp_decode_command command for
# possible printf(3)-like sequences.
# (PGP only)
#
#
# set pgp_list_pubring_command=""
#
# Name: pgp_list_pubring_command
# Type: command
# Default: ""
#
#
# This command is used to list the public key ring's contents. The
# output format must be analogous to the one used by
# gpg --list-keys --with-colons --with-fingerprint
#
# Note: gpg's fixed-list-mode option should not be used. It
# produces a different date format which may result in NeoMutt showing
# incorrect key generation dates.
#
# This is a format string, see the $pgp_decode_command command for
# possible printf(3)-like sequences.
# (PGP only)
#
#
# set pgp_list_secring_command=""
#
# Name: pgp_list_secring_command
# Type: command
# Default: ""
#
#
# This command is used to list the secret key ring's contents. The
# output format must be analogous to the one used by:
# gpg --list-keys --with-colons --with-fingerprint
#
# Note: gpg's fixed-list-mode option should not be used. It
# produces a different date format which may result in NeoMutt showing
# incorrect key generation dates.
#
# This is a format string, see the $pgp_decode_command command for
# possible printf(3)-like sequences.
# (PGP only)
#
#
# set pgp_long_ids=yes
#
# Name: pgp_long_ids
# Type: boolean
# Default: yes
#
#
# If set, use 64 bit PGP key IDs, if unset use the normal 32 bit key IDs.
# NOTE: Internally, NeoMutt has transitioned to using fingerprints (or long key IDs
# as a fallback). This option now only controls the display of key IDs
# in the key selection menu and a few other places.
# (PGP only)
#
#
# set pgp_mime_auto=ask-yes
#
# Name: pgp_mime_auto
# Type: quadoption
# Default: ask-yes
#
#
# This option controls whether NeoMutt will prompt you for
# automatically sending a (signed/encrypted) message using
# PGP/MIME when inline (traditional) fails (for any reason).
#
# Also note that using the old-style PGP message format is strongly
# deprecated.
# (PGP only)
#
#
# set pgp_replyinline=no
#
# Name: pgp_replyinline
# Type: boolean
# Default: no
#
#
# Setting this variable will cause NeoMutt to always attempt to
# create an inline (traditional) message when replying to a
# message which is PGP encrypted/signed inline. This can be
# overridden by use of the pgp menu, when inline is not
# required. This option does not automatically detect if the
# (replied-to) message is inline; instead it relies on NeoMutt
# internals for previously checked/flagged messages.
#
# Note that NeoMutt might automatically use PGP/MIME for messages
# which consist of more than a single MIME part. NeoMutt can be
# configured to ask before sending PGP/MIME messages when inline
# (traditional) would not work.
#
# Also see the $pgp_mime_auto variable.
#
# Also note that using the old-style PGP message format is strongly
# deprecated.
# (PGP only)
#
#
# set pgp_retainable_sigs=no
#
# Name: pgp_retainable_sigs
# Type: boolean
# Default: no
#
#
# If set, signed and encrypted messages will consist of nested
# multipart/signed and multipart/encrypted body parts.
#
# This is useful for applications like encrypted and signed mailing
# lists, where the outer layer (multipart/encrypted) can be easily
# removed, while the inner multipart/signed part is retained.
# (PGP only)
#
#
# set pgp_self_encrypt=yes
#
# Name: pgp_self_encrypt
# Type: boolean
# Default: yes
#
#
# When set, PGP encrypted messages will also be encrypted
# using the key in $pgp_default_key.
# (PGP only)
#
#
# set pgp_show_unusable=yes
#
# Name: pgp_show_unusable
# Type: boolean
# Default: yes
#
#
# If set, NeoMutt will display non-usable keys on the PGP key selection
# menu. This includes keys which have been revoked, have expired, or
# have been marked as ``disabled'' by the user.
# (PGP only)
#
#
# set pgp_sign_as=""
#
# Name: pgp_sign_as
# Type: string
# Default: ""
#
#
# If you have a different key pair to use for signing, you should
# set this to the signing key. Most people will only need to set
# $pgp_default_key. It is recommended that you use the keyid form
# to specify your key (e.g. 0x00112233).
# (PGP only)
#
#
# set pgp_sign_command=""
#
# Name: pgp_sign_command
# Type: command
# Default: ""
#
#
# This command is used to create the detached PGP signature for a
# multipart/signed PGP/MIME body part.
#
# This is a format string, see the $pgp_decode_command command for
# possible printf(3)-like sequences.
# (PGP only)
#
#
# set pgp_sort_keys=address
#
# Name: pgp_sort_keys
# Type: sort order
# Default: address
#
#
# Specifies how the entries in the pgp menu are sorted. The
# following are legal values:
# address sort alphabetically by user id
# keyid sort alphabetically by key id
# date sort by key creation date
# trust sort by the trust of the key
#
#
# If you prefer reverse order of the above values, prefix it with
# ``reverse-''.
# (PGP only)
#
#
# set pgp_strict_enc=yes
#
# Name: pgp_strict_enc
# Type: boolean
# Default: yes
#
#
# If set, NeoMutt will automatically encode PGP/MIME signed messages as
# quoted-printable. Please note that unsetting this variable may
# lead to problems with non-verifyable PGP signatures, so only change
# this if you know what you are doing.
# (PGP only)
#
#
# set pgp_timeout=300
#
# Name: pgp_timeout
# Type: number (long)
# Default: 300
#
#
# The number of seconds after which a cached passphrase will expire if
# not used.
# (PGP only)
#
#
# set pgp_use_gpg_agent=no
#
# Name: pgp_use_gpg_agent
# Type: boolean
# Default: no
#
#
# If set, NeoMutt will use a possibly-running gpg-agent(1) process.
# Note that as of version 2.1, GnuPG no longer exports GPG_AGENT_INFO, so
# NeoMutt no longer verifies if the agent is running.
# (PGP only)
#
#
# set pgp_verify_command=""
#
# Name: pgp_verify_command
# Type: command
# Default: ""
#
#
# This command is used to verify PGP signatures.
#
# This is a format string, see the $pgp_decode_command command for
# possible printf(3)-like sequences.
# (PGP only)
#
#
# set pgp_verify_key_command=""
#
# Name: pgp_verify_key_command
# Type: command
# Default: ""
#
#
# This command is used to verify key information from the key selection
# menu.
#
# This is a format string, see the $pgp_decode_command command for
# possible printf(3)-like sequences.
# (PGP only)
#
#
# set pipe_decode=no
#
# Name: pipe_decode
# Type: boolean
# Default: no
#
#
# Used in connection with the <pipe-message> command. When unset,
# NeoMutt will pipe the messages without any preprocessing. When set, NeoMutt
# will weed headers and will attempt to decode the messages
# first.
#
#
# set pipe_sep="\n"
#
# Name: pipe_sep
# Type: string
# Default: "\n"
#
#
# The separator to add between messages when piping a list of tagged
# messages to an external Unix command.
#
#
# set pipe_split=no
#
# Name: pipe_split
# Type: boolean
# Default: no
#
#
# Used in connection with the <pipe-message> function following
# <tag-prefix>. If this variable is unset, when piping a list of
# tagged messages NeoMutt will concatenate the messages and will pipe them
# all concatenated. When set, NeoMutt will pipe the messages one by one.
# In both cases the messages are piped in the current sorted order,
# and the $pipe_sep separator is added after each message.
#
#
# set pop_auth_try_all=yes
#
# Name: pop_auth_try_all
# Type: boolean
# Default: yes
#
#
# If set, NeoMutt will try all available authentication methods.
# When unset, NeoMutt will only fall back to other authentication
# methods if the previous methods are unavailable. If a method is
# available but authentication fails, NeoMutt will not connect to the POP server.
#
#
# set pop_authenticators=""
#
# Name: pop_authenticators
# Type: string
# Default: ""
#
#
# This is a colon-delimited list of authentication methods NeoMutt may
# attempt to use to log in to an POP server, in the order NeoMutt should
# try them. Authentication methods are either ``user'', ``apop'' or any
# SASL mechanism, e.g. ``digest-md5'', ``gssapi'' or ``cram-md5''.
# This option is case-insensitive. If this option is unset
# (the default) NeoMutt will try all available methods, in order from
# most-secure to least-secure.
#
# Example:
# set pop_authenticators="digest-md5:apop:user"
#
#
# set pop_checkinterval=60
#
# Name: pop_checkinterval
# Type: number
# Default: 60
#
#
# This variable configures how often (in seconds) NeoMutt should look for
# new mail in the currently selected mailbox if it is a POP mailbox.
#
#
# set pop_delete=ask-no
#
# Name: pop_delete
# Type: quadoption
# Default: ask-no
#
#
# If set, NeoMutt will delete successfully downloaded messages from the POP
# server when using the <fetch-mail> function. When unset, NeoMutt will
# download messages but also leave them on the POP server.
#
#
# set pop_host=""
#
# Name: pop_host
# Type: string
# Default: ""
#
#
# The name of your POP server for the <fetch-mail> function. You
# can also specify an alternative port, username and password, i.e.:
# [pop[s]://][username[:password]@]popserver[:port]
#
# where ``[...]'' denotes an optional part.
#
#
# set pop_last=no
#
# Name: pop_last
# Type: boolean
# Default: no
#
#
# If this variable is set, NeoMutt will try to use the ``LAST'' POP command
# for retrieving only unread messages from the POP server when using
# the <fetch-mail> function.
#
#
# set pop_pass=""
#
# Name: pop_pass
# Type: string
# Default: ""
#
#
# Specifies the password for your POP account. If unset, NeoMutt will
# prompt you for your password when you open a POP mailbox.
#
# Warning: you should only use this option when you are on a
# fairly secure machine, because the superuser can read your neomuttrc
# even if you are the only one who can read the file.
#
#
# set pop_reconnect=ask-yes
#
# Name: pop_reconnect
# Type: quadoption
# Default: ask-yes
#
#
# Controls whether or not NeoMutt will try to reconnect to the POP server if
# the connection is lost.
#
#
# set pop_user=""
#
# Name: pop_user
# Type: string
# Default: ""
#
#
# Your login name on the POP server.
#
# This variable defaults to your user name on the local machine.
#
#
# set post_indent_string=""
#
# Name: post_indent_string
# Type: string
# Default: ""
#
#
# Similar to the $attribution variable, NeoMutt will append this
# string after the inclusion of a message which is being replied to.
#
#
# set post_moderated=ask-yes
#
# Name: post_moderated
# Type: quadoption
# Default: ask-yes
#
#
# If set to yes, NeoMutt will post article to newsgroup that have
# not permissions to posting (e.g. moderated). Note: if news server
# does not support posting to that newsgroup or totally read-only, that
# posting will not have an effect.
#
#
# set postpone=ask-yes
#
# Name: postpone
# Type: quadoption
# Default: ask-yes
#
#
# Controls whether or not messages are saved in the $postponed
# mailbox when you elect not to send immediately.
#
# Also see the $recall variable.
#
#
# set postpone_encrypt=no
#
# Name: postpone_encrypt
# Type: boolean
# Default: no
#
#
# When set, postponed messages that are marked for encryption will be
# self-encrypted. NeoMutt will first try to encrypt using the value specified
# in $pgp_default_key or $smime_default_key. If those are not
# set, it will try the deprecated $postpone_encrypt_as.
# (Crypto only)
#
#
# set postpone_encrypt_as=""
#
# Name: postpone_encrypt_as
# Type: string
# Default: ""
#
#
# This is a deprecated fall-back variable for $postpone_encrypt.
# Please use $pgp_default_key or $smime_default_key.
# (Crypto only)
#
#
# set postponed="~/postponed"
#
# Name: postponed
# Type: path
# Default: "~/postponed"
#
#
# NeoMutt allows you to indefinitely ``postpone sending a message'' which
# you are editing. When you choose to postpone a message, NeoMutt saves it
# in the mailbox specified by this variable.
#
# Also see the $postpone variable.
#
#
# set preconnect=""
#
# Name: preconnect
# Type: string
# Default: ""
#
#
# If set, a shell command to be executed if NeoMutt fails to establish
# a connection to the server. This is useful for setting up secure
# connections, e.g. with ssh(1). If the command returns a nonzero
# status, NeoMutt gives up opening the server. Example:
# set preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net \
# sleep 20 < /dev/null > /dev/null"
#
# Mailbox ``foo'' on ``mailhost.net'' can now be reached
# as ``{localhost:1234}foo''.
#
# Note: For this example to work, you must be able to log in to the
# remote machine without having to enter a password.
#
#
# set preferred_languages=""
#
# Name: preferred_languages
# Type: string
# Default: ""
#
#
# RFC8255 : user preferred languages to be search in parts and display
# Ex. : set preferred_languages="en,fr,de"
#
#
# set print=ask-no
#
# Name: print
# Type: quadoption
# Default: ask-no
#
#
# Controls whether or not NeoMutt really prints messages.
# This is set to ``ask-no'' by default, because some people
# accidentally hit ``p'' often.
#
#
# set print_command="lpr"
#
# Name: print_command
# Type: command
# Default: "lpr"
#
#
# This specifies the command pipe that should be used to print messages.
#
#
# set print_decode=yes
#
# Name: print_decode
# Type: boolean
# Default: yes
#
#
# Used in connection with the <print-message> command. If this
# option is set, the message is decoded before it is passed to the
# external command specified by $print_command. If this option
# is unset, no processing will be applied to the message when
# printing it. The latter setting may be useful if you are using
# some advanced printer filter which is able to properly format
# e-mail messages for printing.
#
#
# set print_split=no
#
# Name: print_split
# Type: boolean
# Default: no
#
#
# Used in connection with the <print-message> command. If this option
# is set, the command specified by $print_command is executed once for
# each message which is to be printed. If this option is unset,
# the command specified by $print_command is executed only once, and
# all the messages are concatenated, with a form feed as the message
# separator.
#
# Those who use the enscript(1) program's mail-printing mode will
# most likely want to set this option.
#
#
# set prompt_after=yes
#
# Name: prompt_after
# Type: boolean
# Default: yes
#
#
# If you use an external $pager, setting this variable will
# cause NeoMutt to prompt you for a command when the pager exits rather
# than returning to the index menu. If unset, NeoMutt will return to the
# index menu when the external pager exits.
#
#
# set query_command=""
#
# Name: query_command
# Type: command
# Default: ""
#
#
# This specifies the command NeoMutt will use to make external address
# queries. The string may contain a ``%s'', which will be substituted
# with the query string the user types. NeoMutt will add quotes around the
# string substituted for ``%s'' automatically according to shell quoting
# rules, so you should avoid adding your own. If no ``%s'' is found in
# the string, NeoMutt will append the user's query to the end of the string.
# See ``query'' for more information.
#
#
# set query_format="%4c %t %-25.25a %-25.25n %?e?(%e)?"
#
# Name: query_format
# Type: string
# Default: "%4c %t %-25.25a %-25.25n %?e?(%e)?"
#
#
# This variable describes the format of the ``query'' menu. The
# following printf(3)-style sequences are understood:
# %a Destination address
# %c Current entry number
# %e Extra information *
# %n Destination name
# %t ``*'' if current entry is tagged, a space otherwise
# %>X Right justify the rest of the string and pad with ``X''
# %|X Pad to the end of the line with ``X''
# %*X Soft-fill with character ``X'' as pad
#
#
# For an explanation of ``soft-fill'', see the $index_format documentation.
#
# * = can be optionally printed if nonzero, see the $status_format documentation.
#
#
# set quit=yes
#
# Name: quit
# Type: quadoption
# Default: yes
#
#
# This variable controls whether ``quit'' and ``exit'' actually quit
# from NeoMutt. If this option is set, they do quit, if it is unset, they
# have no effect, and if it is set to ask-yes or ask-no, you are
# prompted for confirmation when you try to quit.
#
#
# set quote_regex="^([ \t]*[|>:}#])+"
#
# Name: quote_regex
# Type: regular expression
# Default: "^([ \t]*[|>:}#])+"
#
#
# A regular expression used in the internal pager to determine quoted
# sections of text in the body of a message. Quoted text may be filtered
# out using the <toggle-quoted> command, or colored according to the
# ``color quoted'' family of directives.
#
# Higher levels of quoting may be colored differently (``color quoted1'',
# ``color quoted2'', etc.). The quoting level is determined by removing
# the last character from the matched text and recursively reapplying
# the regular expression until it fails to produce a match.
#
# Match detection may be overridden by the $smileys regular expression.
#
#
# set read_inc=10
#
# Name: read_inc
# Type: number
# Default: 10
#
#
# If set to a value greater than 0, NeoMutt will display which message it
# is currently on when reading a mailbox or when performing search actions
# such as search and limit. The message is printed after
# this many messages have been read or searched (e.g., if set to 25, NeoMutt will
# print a message when it is at message 25, and then again when it gets
# to message 50). This variable is meant to indicate progress when
# reading or searching large mailboxes which may take some time.
# When set to 0, only a single message will appear before the reading
# the mailbox.
#
# Also see the $write_inc, $net_inc and $time_inc variables and the
# ``tuning'' section of the manual for performance considerations.
#
#
# set read_only=no
#
# Name: read_only
# Type: boolean
# Default: no
#
#
# If set, all folders are opened in read-only mode.
#
#
set realname="Leonardo da Rosa Eugenio"
#
# Name: realname
# Type: string
# Default: ""
#
#
# This variable specifies what ``real'' or ``personal'' name should be used
# when sending messages.
#
# If not specified, then the user's ``real name'' will be read from /etc/passwd.
# This option will not be used, if ``$from'' is set.
#
#
# set recall=ask-yes
#
# Name: recall
# Type: quadoption
# Default: ask-yes
#
#
# Controls whether or not NeoMutt recalls postponed messages
# when composing a new message.
#
# Setting this variable to yes is not generally useful, and thus not
# recommended. Note that the <recall-message> function can be used
# to manually recall postponed messages.
#
# Also see $postponed variable.
#
#
# set record="~/sent"
#
# Name: record
# Type: path
# Default: "~/sent"
#
#
# This specifies the file into which your outgoing messages should be
# appended. (This is meant as the primary method for saving a copy of
# your messages, but another way to do this is using the ``my_hdr''
# command to create a ``Bcc:'' field with your email address in it.)
#
# The value of $record is overridden by the $force_name and
# $save_name variables, and the ``fcc-hook'' command. Also see $copy.
#
#
# set reflow_space_quotes=yes
#
# Name: reflow_space_quotes
# Type: boolean
# Default: yes
#
#
# This option controls how quotes from format=flowed messages are displayed
# in the pager and when replying (with $text_flowed unset).
# When set, this option adds spaces after each level of quote marks, turning
# ">>>foo" into "> > > foo".
#
# Note: If $reflow_text is unset, this option has no effect.
# Also, this option does not affect replies when $text_flowed is set.
#
#
# set reflow_text=yes
#
# Name: reflow_text
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will reformat paragraphs in text/plain
# parts marked format=flowed. If unset, NeoMutt will display paragraphs
# unaltered from how they appear in the message body. See RFC3676 for
# details on the format=flowed format.
#
# Also see $reflow_wrap, and $wrap.
#
#
# set reflow_wrap=78
#
# Name: reflow_wrap
# Type: number
# Default: 78
#
#
# This variable controls the maximum paragraph width when reformatting text/plain
# parts when $reflow_text is set. When the value is 0, paragraphs will
# be wrapped at the terminal's right margin. A positive value sets the
# paragraph width relative to the left margin. A negative value set the
# paragraph width relative to the right margin.
#
# Also see $wrap.
#
#
# set reply_regex="^((re|aw|sv)(\\[[0-9]+\\])*:[ \t]*)*"
#
# Name: reply_regex
# Type: regular expression
# Default: "^((re|aw|sv)(\\[[0-9]+\\])*:[ \t]*)*"
#
#
# A regular expression used to recognize reply messages when threading
# and replying. The default value corresponds to the English "Re:", the
# German "Aw:" and the Swedish "Sv:".
#
#
# set reply_self=no
#
# Name: reply_self
# Type: boolean
# Default: no
#
#
# If unset and you are replying to a message sent by you, NeoMutt will
# assume that you want to reply to the recipients of that message rather
# than to yourself.
#
# Also see the ``alternates'' command.
#
#
# set reply_to=ask-yes
#
# Name: reply_to
# Type: quadoption
# Default: ask-yes
#
#
# If set, when replying to a message, NeoMutt will use the address listed
# in the Reply-to: header as the recipient of the reply. If unset,
# it will use the address in the From: header field instead. This
# option is useful for reading a mailing list that sets the Reply-To:
# header field to the list address and you want to send a private
# message to the author of a message.
#
#
# set reply_with_xorig=no
#
# Name: reply_with_xorig
# Type: boolean
# Default: no
#
#
# This variable provides a toggle. When active, the From: header will be
# extracted from the current mail's `X-Original-To:' header. This setting
# does not have precedence over ``reverse_realname''.
#
# Assuming `fast_reply' is disabled, this option will prompt the user with a
# prefilled From: header.
#
#
# set resolve=yes
#
# Name: resolve
# Type: boolean
# Default: yes
#
#
# When set, the cursor will be automatically advanced to the next
# (possibly undeleted) message whenever a command that modifies the
# current message is executed.
#
#
# set resume_draft_files=no
#
# Name: resume_draft_files
# Type: boolean
# Default: no
#
#
# If set, draft files (specified by -H on the command
# line) are processed similarly to when resuming a postponed
# message. Recipients are not prompted for; send-hooks are not
# evaluated; no alias expansion takes place; user-defined headers
# and signatures are not added to the message.
#
#
# set resume_edited_draft_files=yes
#
# Name: resume_edited_draft_files
# Type: boolean
# Default: yes
#
#
# If set, draft files previously edited (via -E -H on
# the command line) will have $resume_draft_files automatically
# set when they are used as a draft file again.
#
# The first time a draft file is saved, NeoMutt will add a header,
# X-Mutt-Resume-Draft to the saved file. The next time the draft
# file is read in, if NeoMutt sees the header, it will set
# $resume_draft_files.
#
# This option is designed to prevent multiple signatures,
# user-defined headers, and other processing effects from being
# made multiple times to the draft file.
#
#
# set reverse_alias=no
#
# Name: reverse_alias
# Type: boolean
# Default: no
#
#
# This variable controls whether or not NeoMutt will display the ``personal''
# name from your aliases in the index menu if it finds an alias that
# matches the message's sender. For example, if you have the following
# alias:
# alias juser abd30425@somewhere.net (Joe User)
#
# and then you receive mail which contains the following header:
# From: abd30425@somewhere.net
#
# It would be displayed in the index menu as ``Joe User'' instead of
# ``abd30425@somewhere.net.'' This is useful when the person's e-mail
# address is not human friendly.
#
#
# set reverse_name=no
#
# Name: reverse_name
# Type: boolean
# Default: no
#
#
# It may sometimes arrive that you receive mail to a certain machine,
# move the messages to another machine, and reply to some the messages
# from there. If this variable is set, the default From: line of
# the reply messages is built using the address where you received the
# messages you are replying to if that address matches your
# ``alternates''. If the variable is unset, or the address that would be
# used doesn't match your ``alternates'', the From: line will use
# your address on the current machine.
#
# Also see the ``alternates'' command.
#
#
# set reverse_realname=yes
#
# Name: reverse_realname
# Type: boolean
# Default: yes
#
#
# This variable fine-tunes the behavior of the $reverse_name feature.
# When it is set, NeoMutt will use the address from incoming messages as-is,
# possibly including eventual real names. When it is unset, NeoMutt will
# override any such real names with the setting of the $realname variable.
#
#
# set rfc2047_parameters=no
#
# Name: rfc2047_parameters
# Type: boolean
# Default: no
#
#
# When this variable is set, NeoMutt will decode RFC2047-encoded MIME
# parameters. You want to set this variable when NeoMutt suggests you
# to save attachments to files named like:
# =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=
#
# When this variable is set interactively, the change won't be
# active until you change folders.
#
# Note that this use of RFC2047's encoding is explicitly
# prohibited by the standard, but nevertheless encountered in the
# wild.
#
# Also note that setting this parameter will not have the effect
# that NeoMutt generates this kind of encoding. Instead, NeoMutt will
# unconditionally use the encoding specified in RFC2231.
#
#
# set save_address=no
#
# Name: save_address
# Type: boolean
# Default: no
#
#
# If set, NeoMutt will take the sender's full address when choosing a
# default folder for saving a mail. If $save_name or $force_name
# is set too, the selection of the Fcc folder will be changed as well.
#
#
# set save_empty=yes
#
# Name: save_empty
# Type: boolean
# Default: yes
#
#
# When unset, mailboxes which contain no saved messages will be removed
# when closed (the exception is $spoolfile which is never removed).
# If set, mailboxes are never removed.
#
# Note: This only applies to mbox and MMDF folders, NeoMutt does not
# delete MH and Maildir directories.
#
#
# set save_history=0
#
# Name: save_history
# Type: number
# Default: 0
#
#
# This variable controls the size of the history (per category) saved in the
# $history_file file.
#
#
# set save_name=no
#
# Name: save_name
# Type: boolean
# Default: no
#
#
# This variable controls how copies of outgoing messages are saved.
# When set, a check is made to see if a mailbox specified by the
# recipient address exists (this is done by searching for a mailbox in
# the $folder directory with the username part of the
# recipient address). If the mailbox exists, the outgoing message will
# be saved to that mailbox, otherwise the message is saved to the
# $record mailbox.
#
# Also see the $force_name variable.
#
#
# set save_unsubscribed=no
#
# Name: save_unsubscribed
# Type: boolean
# Default: no
#
#
# When set, info about unsubscribed newsgroups will be saved into
# ``newsrc'' file and into cache.
#
#
# set score=yes
#
# Name: score
# Type: boolean
# Default: yes
#
#
# When this variable is unset, scoring is turned off. This can
# be useful to selectively disable scoring for certain folders when the
# $score_threshold_delete variable and related are used.
#
#
# set score_threshold_delete=-1
#
# Name: score_threshold_delete
# Type: number
# Default: -1
#
#
# Messages which have been assigned a score equal to or lower than the value
# of this variable are automatically marked for deletion by NeoMutt. Since
# NeoMutt scores are always greater than or equal to zero, the default setting
# of this variable will never mark a message for deletion.
#
#
# set score_threshold_flag=9999
#
# Name: score_threshold_flag
# Type: number
# Default: 9999
#
#
# Messages which have been assigned a score greater than or equal to this
# variable's value are automatically marked "flagged".
#
#
# set score_threshold_read=-1
#
# Name: score_threshold_read
# Type: number
# Default: -1
#
#
# Messages which have been assigned a score equal to or lower than the value
# of this variable are automatically marked as read by NeoMutt. Since
# NeoMutt scores are always greater than or equal to zero, the default setting
# of this variable will never mark a message read.
#
#
# set search_context=0
#
# Name: search_context
# Type: number
# Default: 0
#
#
# For the pager, this variable specifies the number of lines shown
# before search results. By default, search results will be top-aligned.
#
#
# set send_charset="us-ascii:iso-8859-1:utf-8"
#
# Name: send_charset
# Type: string
# Default: "us-ascii:iso-8859-1:utf-8"
#
#
# A colon-delimited list of character sets for outgoing messages. NeoMutt will use the
# first character set into which the text can be converted exactly.
# If your $charset is not ``iso-8859-1'' and recipients may not
# understand ``UTF-8'', it is advisable to include in the list an
# appropriate widely used standard character set (such as
# ``iso-8859-2'', ``koi8-r'' or ``iso-2022-jp'') either instead of or after
# ``iso-8859-1''.
#
# In case the text cannot be converted into one of these exactly,
# NeoMutt uses $charset as a fallback.
#
#
# set sendmail="/usr/sbin/sendmail -oem -oi"
#
# Name: sendmail
# Type: command
# Default: "/usr/sbin/sendmail -oem -oi"
#
#
# Specifies the program and arguments used to deliver mail sent by NeoMutt.
# NeoMutt expects that the specified program interprets additional
# arguments as recipient addresses. NeoMutt appends all recipients after
# adding a -- delimiter (if not already present). Additional
# flags, such as for $use_8bitmime, $use_envelope_from,
# $dsn_notify, or $dsn_return will be added before the delimiter.
#
#
# set sendmail_wait=0
#
# Name: sendmail_wait
# Type: number
# Default: 0
#
#
# Specifies the number of seconds to wait for the $sendmail process
# to finish before giving up and putting delivery in the background.
#
# NeoMutt interprets the value of this variable as follows:
# >0 number of seconds to wait for sendmail to finish before continuing
# 0 wait forever for sendmail to finish
# <0 always put sendmail in the background without waiting
#
#
# Note that if you specify a value other than 0, the output of the child
# process will be put in a temporary file. If there is some error, you
# will be informed as to where to find the output.
#
#
# set shell=""
#
# Name: shell
# Type: command
# Default: ""
#
#
# Command to use when spawning a subshell.
# If not specified, then the user's login shell from /etc/passwd is used.
#
#
# set show_multipart_alternative=""
#
# Name: show_multipart_alternative
# Type: string
# Default: ""
#
#
# When set to info, the multipart/alternative information is shown.
# When set to inline, all of the alternatives are displayed.
# When not set, the default behavior is to show only the chosen alternative.
#
#
# set show_new_news=yes
#
# Name: show_new_news
# Type: boolean
# Default: yes
#
#
# If set, news server will be asked for new newsgroups on entering
# the browser. Otherwise, it will be done only once for a news server.
# Also controls whether or not number of new articles of subscribed
# newsgroups will be then checked.
#
#
# set show_only_unread=no
#
# Name: show_only_unread
# Type: boolean
# Default: no
#
#
# If set, only subscribed newsgroups that contain unread articles
# will be displayed in browser.
#
#
# set sidebar_component_depth=0
#
# Name: sidebar_component_depth
# Type: number
# Default: 0
#
#
# By default the sidebar will show the mailbox's path, relative to the
# $folder variable. This specifies the number of parent directories to hide
# from display in the sidebar. For example: If a maildir is normally
# displayed in the sidebar as dir1/dir2/dir3/maildir, setting
# sidebar_component_depth=2 will display it as dir3/maildir, having
# truncated the 2 highest directories.
#
# See also: $sidebar_short_path
#
#
# set sidebar_delim_chars="/."
#
# Name: sidebar_delim_chars
# Type: string
# Default: "/."
#
#
# This contains the list of characters which you would like to treat
# as folder separators for displaying paths in the sidebar.
#
# Local mail is often arranged in directories: `dir1/dir2/mailbox'.
# set sidebar_delim_chars='/'
#
# IMAP mailboxes are often named: `folder1.folder2.mailbox'.
# set sidebar_delim_chars='.'
#
# See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_indent_string.
#
#
# set sidebar_divider_char=""
#
# Name: sidebar_divider_char
# Type: string
# Default: ""
#
#
# This specifies the characters to be drawn between the sidebar (when
# visible) and the other NeoMutt panels. ASCII and Unicode line-drawing
# characters are supported.
#
#
# set sidebar_folder_indent=no
#
# Name: sidebar_folder_indent
# Type: boolean
# Default: no
#
#
# Set this to indent mailboxes in the sidebar.
#
# See also: $sidebar_short_path, $sidebar_indent_string, $sidebar_delim_chars.
#
#
# set sidebar_format="%B%* %n"
#
# Name: sidebar_format
# Type: string
# Default: "%B%* %n"
#
#
# This variable allows you to customize the sidebar display. This string is
# similar to $index_format, but has its own set of printf(3)-like
# sequences:
# %B Name of the mailbox
# %S * Size of mailbox (total number of messages)
# %N * Number of unread messages in the mailbox
# %n N if mailbox has new mail, blank otherwise
# %F * Number of Flagged messages in the mailbox
# %! ``!'' : one flagged message;
# ``!!'' : two flagged messages;
# ``n!'' : n flagged messages (for n > 2).
# Otherwise prints nothing.
# %d * @ Number of deleted messages
# %L * @ Number of messages after limiting
# %t * @ Number of tagged messages
# %>X right justify the rest of the string and pad with ``X''
# %|X pad to the end of the line with ``X''
# %*X soft-fill with character ``X'' as pad
#
#
# * = Can be optionally printed if nonzero
# @ = Only applicable to the current folder
#
# In order to use %S, %N, %F, and %!, $mail_check_stats must
# be set. When thus set, a suggested value for this option is
# "%B%?F? [%F]?%* %?N?%N/?%S".
#
#
# set sidebar_indent_string=" "
#
# Name: sidebar_indent_string
# Type: string
# Default: " "
#
#
# This specifies the string that is used to indent mailboxes in the sidebar.
# It defaults to two spaces.
#
# See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_delim_chars.
#
#
# set sidebar_new_mail_only=no
#
# Name: sidebar_new_mail_only
# Type: boolean
# Default: no
#
#
# When set, the sidebar will only display mailboxes containing new, or
# flagged, mail.
#
# See also: sidebar_whitelist.
#
#
# set sidebar_next_new_wrap=no
#
# Name: sidebar_next_new_wrap
# Type: boolean
# Default: no
#
#
# When set, the <sidebar-next-new> command will not stop and the end of
# the list of mailboxes, but wrap around to the beginning. The
# <sidebar-prev-new> command is similarly affected, wrapping around to
# the end of the list.
#
#
# set sidebar_on_right=no
#
# Name: sidebar_on_right
# Type: boolean
# Default: no
#
#
# When set, the sidebar will appear on the right-hand side of the screen.
#
#
# set sidebar_short_path=no
#
# Name: sidebar_short_path
# Type: boolean
# Default: no
#
#
# By default the sidebar will show the mailbox's path, relative to the
# $folder variable. Setting sidebar_shortpath=yes will shorten the
# names relative to the previous name. Here's an example:
# shortpath=no shortpath=yes shortpath=yes, folderindent=yes, indentstr=".."
# fruit fruit fruit
# fruit.apple apple ..apple
# fruit.banana banana ..banana
# fruit.cherry cherry ..cherry
#
#
# See also: $sidebar_delim_chars, $sidebar_folder_indent,
# $sidebar_indent_string, $sidebar_component_depth.
#
#
# set sidebar_sort_method=order
#
# Name: sidebar_sort_method
# Type: sort order
# Default: order
#
#
# Specifies how to sort entries in the file browser. By default, the
# entries are sorted alphabetically. Valid values:
# - alpha (alphabetically)
# - count (all message count)
# - flagged (flagged message count)
# - name (alphabetically)
# - new (unread message count)
# - path (alphabetically)
# - unread (unread message count)
# - unsorted
#
#
# You may optionally use the ``reverse-'' prefix to specify reverse sorting
# order (example: ``set sort_browser=reverse-date'').
#
#
# set sidebar_visible=no
#
# Name: sidebar_visible
# Type: boolean
# Default: no
#
#
# This specifies whether or not to show sidebar. The sidebar shows a list of
# all your mailboxes.
#
# See also: $sidebar_format, $sidebar_width
#
#
# set sidebar_width=30
#
# Name: sidebar_width
# Type: number
# Default: 30
#
#
# This controls the width of the sidebar. It is measured in screen columns.
# For example: sidebar_width=20 could display 20 ASCII characters, or 10
# Chinese characters.
#
#
# set sig_dashes=yes
#
# Name: sig_dashes
# Type: boolean
# Default: yes
#
#
# If set, a line containing ``-- '' (note the trailing space) will be inserted before your
# $signature. It is strongly recommended that you not unset
# this variable unless your signature contains just your name. The
# reason for this is because many software packages use ``-- \n'' to
# detect your signature. For example, NeoMutt has the ability to highlight
# the signature in a different color in the built-in pager.
#
#
# set sig_on_top=no
#
# Name: sig_on_top
# Type: boolean
# Default: no
#
#
# If set, the signature will be included before any quoted or forwarded
# text. It is strongly recommended that you do not set this variable
# unless you really know what you are doing, and are prepared to take
# some heat from netiquette guardians.
#
#
# set signature="~/.signature"
#
# Name: signature
# Type: path
# Default: "~/.signature"
#
#
# Specifies the filename of your signature, which is appended to all
# outgoing messages. If the filename ends with a pipe (``|''), it is
# assumed that filename is a shell command and input should be read from
# its standard output.
#
#
# set simple_search="~f %s | ~s %s"
#
# Name: simple_search
# Type: string
# Default: "~f %s | ~s %s"
#
#
# Specifies how NeoMutt should expand a simple search into a real search
# pattern. A simple search is one that does not contain any of the ``~'' pattern
# operators. See ``patterns'' for more information on search patterns.
#
# For example, if you simply type ``joe'' at a search or limit prompt, NeoMutt
# will automatically expand it to the value specified by this variable by
# replacing ``%s'' with the supplied string.
# For the default value, ``joe'' would be expanded to: ``~f joe | ~s joe''.
#
#
# set skip_quoted_offset=0
#
# Name: skip_quoted_offset
# Type: number
# Default: 0
#
#
# Lines of quoted text that are displayed before the unquoted text after
# ``skip to quoted'' command (S)
#
#
# set sleep_time=1
#
# Name: sleep_time
# Type: number
# Default: 1
#
#
# Specifies time, in seconds, to pause while displaying certain informational
# messages, while moving from folder to folder and after expunging
# messages from the current folder. The default is to pause one second, so
# a value of zero for this option suppresses the pause.
#
#
# set smart_wrap=yes
#
# Name: smart_wrap
# Type: boolean
# Default: yes
#
#
# Controls the display of lines longer than the screen width in the
# internal pager. If set, long lines are wrapped at a word boundary. If
# unset, lines are simply wrapped at the screen edge. Also see the
# $markers variable.
#
#
# set smileys="(>From )|(:[-^]?[][)(><}{|/DP])"
#
# Name: smileys
# Type: regular expression
# Default: "(>From )|(:[-^]?[][)(><}{|/DP])"
#
#
# The pager uses this variable to catch some common false
# positives of $quote_regex, most notably smileys and not consider
# a line quoted text if it also matches $smileys. This mostly
# happens at the beginning of a line.
#
#
# set smime_ask_cert_label=yes
#
# Name: smime_ask_cert_label
# Type: boolean
# Default: yes
#
#
# This flag controls whether you want to be asked to enter a label
# for a certificate about to be added to the database or not. It is
# set by default.
# (S/MIME only)
#
#
# set smime_ca_location=""
#
# Name: smime_ca_location
# Type: path
# Default: ""
#
#
# This variable contains the name of either a directory, or a file which
# contains trusted certificates for use with OpenSSL.
# (S/MIME only)
#
#
# set smime_certificates=""
#
# Name: smime_certificates
# Type: path
# Default: ""
#
#
# Since for S/MIME there is no pubring/secring as with PGP, NeoMutt has to handle
# storage and retrieval of keys by itself. This is very basic right
# now, and keys and certificates are stored in two different
# directories, both named as the hash-value retrieved from
# OpenSSL. There is an index file which contains mailbox-address
# keyid pairs, and which can be manually edited. This option points to
# the location of the certificates.
# (S/MIME only)
#
#
# set smime_decrypt_command=""
#
# Name: smime_decrypt_command
# Type: command
# Default: ""
#
#
# This format string specifies a command which is used to decrypt
# application/x-pkcs7-mime attachments.
#
# The OpenSSL command formats have their own set of printf(3)-like sequences
# similar to PGP's:
# %f Expands to the name of a file containing a message.
# %s Expands to the name of a file containing the signature part
# of a multipart/signed attachment when verifying it.
# %k The key-pair specified with $smime_default_key
# %i Intermediate certificates
# %c One or more certificate IDs.
# %a The algorithm used for encryption.
# %d The message digest algorithm specified with $smime_sign_digest_alg.
# %C CA location: Depending on whether $smime_ca_location
# points to a directory or file, this expands to
# ``-CApath $smime_ca_location'' or ``-CAfile $smime_ca_location''.
#
#
# For examples on how to configure these formats, see the smime.rc in
# the samples/ subdirectory which has been installed on your system
# alongside the documentation.
# (S/MIME only)
#
#
# set smime_decrypt_use_default_key=yes
#
# Name: smime_decrypt_use_default_key
# Type: boolean
# Default: yes
#
#
# If set (default) this tells NeoMutt to use the default key for decryption. Otherwise,
# if managing multiple certificate-key-pairs, NeoMutt will try to use the mailbox-address
# to determine the key to use. It will ask you to supply a key, if it can't find one.
# (S/MIME only)
#
#
# set smime_default_key=""
#
# Name: smime_default_key
# Type: string
# Default: ""
#
#
# This is the default key-pair to use for S/MIME operations, and must be
# set to the keyid (the hash-value that OpenSSL generates) to work properly.
#
# It will be used for encryption (see $postpone_encrypt and
# $smime_self_encrypt).
#
# It will be used for decryption unless $smime_decrypt_use_default_key
# is unset.
#
# It will also be used for signing unless $smime_sign_as is set.
#
# The (now deprecated) smime_self_encrypt_as is an alias for this
# variable, and should no longer be used.
# (S/MIME only)
#
#
# set smime_encrypt_command=""
#
# Name: smime_encrypt_command
# Type: command
# Default: ""
#
#
# This command is used to create encrypted S/MIME messages.
#
# This is a format string, see the $smime_decrypt_command command for
# possible printf(3)-like sequences.
# (S/MIME only)
#
# Encrypt the message to $smime_default_key too.
# (S/MIME only)
#
#
# set smime_encrypt_with="aes256"
#
# Name: smime_encrypt_with
# Type: string
# Default: "aes256"
#
#
# This sets the algorithm that should be used for encryption.
# Valid choices are ``aes128'', ``aes192'', ``aes256'', ``des'', ``des3'', ``rc2-40'', ``rc2-64'', ``rc2-128''.
# (S/MIME only)
#
#
# set smime_get_cert_command=""
#
# Name: smime_get_cert_command
# Type: command
# Default: ""
#
#
# This command is used to extract X509 certificates from a PKCS7 structure.
#
# This is a format string, see the $smime_decrypt_command command for
# possible printf(3)-like sequences.
# (S/MIME only)
#
#
# set smime_get_cert_email_command=""
#
# Name: smime_get_cert_email_command
# Type: command
# Default: ""
#
#
# This command is used to extract the mail address(es) used for storing
# X509 certificates, and for verification purposes (to check whether the
# certificate was issued for the sender's mailbox).
#
# This is a format string, see the $smime_decrypt_command command for
# possible printf(3)-like sequences.
# (S/MIME only)
#
#
# set smime_get_signer_cert_command=""
#
# Name: smime_get_signer_cert_command
# Type: command
# Default: ""
#
#
# This command is used to extract only the signers X509 certificate from a S/MIME
# signature, so that the certificate's owner may get compared to the
# email's ``From:'' field.
#
# This is a format string, see the $smime_decrypt_command command for
# possible printf(3)-like sequences.
# (S/MIME only)
#
#
# set smime_import_cert_command=""
#
# Name: smime_import_cert_command
# Type: command
# Default: ""
#
#
# This command is used to import a certificate via smime_keys.
#
# This is a format string, see the $smime_decrypt_command command for
# possible printf(3)-like sequences. NOTE: %c and %k will default
# to $smime_sign_as if set, otherwise $smime_default_key.
# (S/MIME only)
#
#
# set smime_is_default=no
#
# Name: smime_is_default
# Type: boolean
# Default: no
#
#
# The default behavior of NeoMutt is to use PGP on all auto-sign/encryption
# operations. To override and to use OpenSSL instead this must be set.
# However, this has no effect while replying, since NeoMutt will automatically
# select the same application that was used to sign/encrypt the original
# message. (Note that this variable can be overridden by unsetting $crypt_autosmime.)
# (S/MIME only)
#
#
# set smime_keys=""
#
# Name: smime_keys
# Type: path
# Default: ""
#
#
# Since for S/MIME there is no pubring/secring as with PGP, NeoMutt has to handle
# storage and retrieval of keys/certs by itself. This is very basic right now,
# and stores keys and certificates in two different directories, both
# named as the hash-value retrieved from OpenSSL. There is an index file
# which contains mailbox-address keyid pair, and which can be manually
# edited. This option points to the location of the private keys.
# (S/MIME only)
#
#
# set smime_pk7out_command=""
#
# Name: smime_pk7out_command
# Type: command
# Default: ""
#
#
# This command is used to extract PKCS7 structures of S/MIME signatures,
# in order to extract the public X509 certificate(s).
#
# This is a format string, see the $smime_decrypt_command command for
# possible printf(3)-like sequences.
# (S/MIME only)
#
#
# set smime_self_encrypt=yes
#
# Name: smime_self_encrypt
# Type: boolean
# Default: yes
#
#
# When set, S/MIME encrypted messages will also be encrypted
# using the certificate in $smime_default_key.
# (S/MIME only)
#
#
# set smime_sign_as=""
#
# Name: smime_sign_as
# Type: string
# Default: ""
#
#
# If you have a separate key to use for signing, you should set this
# to the signing key. Most people will only need to set $smime_default_key.
# (S/MIME only)
#
#
# set smime_sign_command=""
#
# Name: smime_sign_command
# Type: command
# Default: ""
#
#
# This command is used to created S/MIME signatures of type
# multipart/signed, which can be read by all mail clients.
#
# This is a format string, see the $smime_decrypt_command command for
# possible printf(3)-like sequences.
# (S/MIME only)
#
#
# set smime_sign_digest_alg="sha256"
#
# Name: smime_sign_digest_alg
# Type: string
# Default: "sha256"
#
#
# This sets the algorithm that should be used for the signature message digest.
# Valid choices are ``md5'', ``sha1'', ``sha224'', ``sha256'', ``sha384'', ``sha512''.
# (S/MIME only)
#
#
# set smime_timeout=300
#
# Name: smime_timeout
# Type: number (long)
# Default: 300
#
#
# The number of seconds after which a cached passphrase will expire if
# not used.
# (S/MIME only)
#
#
# set smime_verify_command=""
#
# Name: smime_verify_command
# Type: command
# Default: ""
#
#
# This command is used to verify S/MIME signatures of type multipart/signed.
#
# This is a format string, see the $smime_decrypt_command command for
# possible printf(3)-like sequences.
# (S/MIME only)
#
#
# set smime_verify_opaque_command=""
#
# Name: smime_verify_opaque_command
# Type: command
# Default: ""
#
#
# This command is used to verify S/MIME signatures of type
# application/x-pkcs7-mime.
#
# This is a format string, see the $smime_decrypt_command command for
# possible printf(3)-like sequences.
# (S/MIME only)
#
#
# set smtp_authenticators=""
#
# Name: smtp_authenticators
# Type: string
# Default: ""
#
#
# This is a colon-delimited list of authentication methods NeoMutt may
# attempt to use to log in to an SMTP server, in the order NeoMutt should
# try them. Authentication methods are any SASL mechanism, e.g. ``plain'',
# ``digest-md5'', ``gssapi'' or ``cram-md5''.
# This option is case-insensitive. If it is ``unset''
# (the default) NeoMutt will try all available methods, in order from
# most-secure to least-secure. Support for the ``plain'' mechanism is
# bundled; other mechanisms are provided by an external SASL library (look
# for +USE_SASL in the output of neomutt -v).
#
# Example:
# set smtp_authenticators="digest-md5:cram-md5"
#
#
set smtp_pass=$my_pass
#
# Name: smtp_pass
# Type: string
# Default: ""
#
#
# Specifies the password for your SMTP account. If unset, NeoMutt will
# prompt you for your password when you first send mail via SMTP.
# See $smtp_url to configure NeoMutt to send mail via SMTP.
#
# Warning: you should only use this option when you are on a
# fairly secure machine, because the superuser can read your neomuttrc even
# if you are the only one who can read the file.
#
#
set smtp_url="smtps://$my_user:$my_pass@$my_provider"
#
# Name: smtp_url
# Type: string
# Default: ""
#
#
# Defines the SMTP smarthost where sent messages should relayed for
# delivery. This should take the form of an SMTP URL, e.g.:
# smtp[s]://[user[:pass]@]host[:port]
#
# where ``[...]'' denotes an optional part.
# Setting this variable overrides the value of the $sendmail
# variable.
#
#
# set sort=date
#
# Name: sort
# Type: sort order
# Default: date
#
#
# Specifies how to sort messages in the ``index'' menu. Valid values
# are:
# - date or date-sent
# - date-received
# - from
# - mailbox-order (unsorted)
# - score
# - size
# - spam
# - subject
# - threads
# - to
#
#
# You may optionally use the ``reverse-'' prefix to specify reverse sorting
# order.
#
# Example:
# set sort=reverse-date-sent
#
#
# set sort_alias=alias
#
# Name: sort_alias
# Type: sort order
# Default: alias
#
#
# Specifies how the entries in the ``alias'' menu are sorted. The
# following are legal values:
# - address (sort alphabetically by email address)
# - alias (sort alphabetically by alias name)
# - unsorted (leave in order specified in .neomuttrc)
#
#
# set sort_aux=date
#
# Name: sort_aux
# Type: sort order
# Default: date
#
#
# When sorting by threads, this variable controls how threads are sorted
# in relation to other threads, and how the branches of the thread trees
# are sorted. This can be set to any value that $sort can, except
# ``threads'' (in that case, NeoMutt will just use ``date-sent''). You can also
# specify the ``last-'' prefix in addition to the ``reverse-'' prefix, but ``last-''
# must come after ``reverse-''. The ``last-'' prefix causes messages to be
# sorted against its siblings by which has the last descendant, using
# the rest of $sort_aux as an ordering. For instance,
# set sort_aux=last-date-received
#
# would mean that if a new message is received in a
# thread, that thread becomes the last one displayed (or the first, if
# you have ``set sort=reverse-threads''.)
#
# Note: For reversed $sort
# order $sort_aux is reversed again (which is not the right thing to do,
# but kept to not break any existing configuration setting).
#
#
# set sort_browser=alpha
#
# Name: sort_browser
# Type: sort order
# Default: alpha
#
#
# Specifies how to sort entries in the file browser. By default, the
# entries are sorted alphabetically. Valid values:
# - alpha (alphabetically)
# - count (all message count)
# - date
# - desc (description)
# - new (new message count)
# - size
# - unsorted
#
#
# You may optionally use the ``reverse-'' prefix to specify reverse sorting
# order (example: ``set sort_browser=reverse-date'').
#
#
# set sort_re=yes
#
# Name: sort_re
# Type: boolean
# Default: yes
#
#
# This variable is only useful when sorting by mailboxes in sidebar. By default,
# entries are unsorted. Valid values:
# - count (all message count)
# - desc (virtual mailbox description)
# - new (new message count)
# - path
# - unsorted
#
#
# set spam_separator=","
#
# Name: spam_separator
# Type: string
# Default: ","
#
#
# This variable controls what happens when multiple spam headers
# are matched: if unset, each successive header will overwrite any
# previous matches value for the spam label. If set, each successive
# match will append to the previous, using this variable's value as a
# separator.
#
#
set spoolfile="+INBOX"
mailboxes = +INBOX
#
# Name: spoolfile
# Type: path
# Default: ""
#
#
# If your spool mailbox is in a non-default place where NeoMutt cannot find
# it, you can specify its location with this variable.
#
# If not specified, then the environment variables $MAIL and
# $MAILDIR will be checked.
#
#
# set ssl_ciphers=""
#
# Name: ssl_ciphers
# Type: string
# Default: ""
#
#
# Contains a colon-separated list of ciphers to use when using SSL.
# For OpenSSL, see ciphers(1) for the syntax of the string.
#
# For GnuTLS, this option will be used in place of "NORMAL" at the
# start of the priority string. See gnutls_priority_init(3) for the
# syntax and more details. (Note: GnuTLS version 2.1.7 or higher is
# required.)
#
#
# set ssl_client_cert=""
#
# Name: ssl_client_cert
# Type: path
# Default: ""
#
#
# The file containing a client certificate and its associated private
# key.
#
#
set ssl_force_tls=yes
#
# Name: ssl_force_tls
# Type: boolean
# Default: no
#
#
# If this variable is set, NeoMutt will require that all connections
# to remote servers be encrypted. Furthermore it will attempt to
# negotiate TLS even if the server does not advertise the capability,
# since it would otherwise have to abort the connection anyway. This
# option supersedes $ssl_starttls.
#
#
set ssl_starttls=yes
#
# Name: ssl_starttls
# Type: quadoption
# Default: yes
#
#
# If set (the default), NeoMutt will attempt to use STARTTLS on servers
# advertising the capability. When unset, NeoMutt will not attempt to
# use STARTTLS regardless of the server's capabilities.
#
#
# set ssl_use_sslv2=no
#
# Name: ssl_use_sslv2
# Type: boolean
# Default: no
#
#
# This variable specifies whether to attempt to use SSLv2 in the
# SSL authentication process. Note that SSLv2 and SSLv3 are now
# considered fundamentally insecure and are no longer recommended.
# (OpenSSL only)
#
#
# set ssl_use_sslv3=no
#
# Name: ssl_use_sslv3
# Type: boolean
# Default: no
#
#
# This variable specifies whether to attempt to use SSLv3 in the
# SSL authentication process. Note that SSLv2 and SSLv3 are now
# considered fundamentally insecure and are no longer recommended.
#
#
# set ssl_use_tlsv1=yes
#
# Name: ssl_use_tlsv1
# Type: boolean
# Default: yes
#
#
# This variable specifies whether to attempt to use TLSv1.0 in the
# SSL authentication process.
#
#
# set ssl_use_tlsv1_1=yes
#
# Name: ssl_use_tlsv1_1
# Type: boolean
# Default: yes
#
#
# This variable specifies whether to attempt to use TLSv1.1 in the
# SSL authentication process.
#
#
# set ssl_use_tlsv1_2=yes
#
# Name: ssl_use_tlsv1_2
# Type: boolean
# Default: yes
#
#
# This variable specifies whether to attempt to use TLSv1.2 in the
# SSL authentication process.
#
#
# set ssl_usesystemcerts=yes
#
# Name: ssl_usesystemcerts
# Type: boolean
# Default: yes
#
#
# If set to yes, NeoMutt will use CA certificates in the
# system-wide certificate store when checking if a server certificate
# is signed by a trusted CA. (OpenSSL only)
#
#
# set ssl_verify_dates=yes
#
# Name: ssl_verify_dates
# Type: boolean
# Default: yes
#
#
# If set (the default), NeoMutt will not automatically accept a server
# certificate that is either not yet valid or already expired. You should
# only unset this for particular known hosts, using the
# <account-hook> function.
#
#
# set ssl_verify_host=yes
#
# Name: ssl_verify_host
# Type: boolean
# Default: yes
#
#
# If set (the default), NeoMutt will not automatically accept a server
# certificate whose host name does not match the host used in your folder
# URL. You should only unset this for particular known hosts, using
# the <account-hook> function.
#
#
# set ssl_verify_partial_chains=no
#
# Name: ssl_verify_partial_chains
# Type: boolean
# Default: no
#
#
# This option should not be changed from the default unless you understand
# what you are doing.
#
# Setting this variable to yes will permit verifying partial
# certification chains, i. e. a certificate chain where not the root,
# but an intermediate certificate CA, or the host certificate, are
# marked trusted (in $certificate_file), without marking the root
# signing CA as trusted.
#
# (OpenSSL 1.0.2b and newer only).
#
#
# set status_chars="-*%A"
#
# Name: status_chars
# Type: string
# Default: "-*%A"
#
#
# Controls the characters used by the ``%r'' indicator in $status_format.
# Character Default Description
# 1 - Mailbox is unchanged
# 2 * Mailbox has been changed and needs to be resynchronized
# 3 % Mailbox is read-only, or will not be written when exiting.
# (You can toggle whether to write changes to a mailbox
# with the <toggle-write> operation, bound by default
# to ``%'')
# 4 A Folder opened in attach-message mode.
# (Certain operations like composing a new mail, replying,
# forwarding, etc. are not permitted in this mode)
#
#
# set status_format="-%r-NeoMutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"
#
# Name: status_format
# Type: string
# Default: "-%r-NeoMutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"
#
#
# Controls the format of the status line displayed in the ``index''
# menu. This string is similar to $index_format, but has its own
# set of printf(3)-like sequences:
# %b Number of mailboxes with new mail *
# %d Number of deleted messages *
# %f The full pathname of the current mailbox
# %F Number of flagged messages *
# %h Local hostname
# %l Size (in bytes) of the current mailbox *
# %L Size (in bytes) of the messages shown
# (i.e., which match the current limit) *
# %m The number of messages in the mailbox *
# %M The number of messages shown (i.e., which match the current limit) *
# %n Number of new messages in the mailbox *
# %o Number of old unread messages *
# %p Number of postponed messages *
# %P Percentage of the way through the index
# %r Modified/read-only/won't-write/attach-message indicator,
# According to $status_chars
# %R Number of read messages *
# %s Current sorting mode ($sort)
# %S Current aux sorting method ($sort_aux)
# %t Number of tagged messages *
# %u Number of unread messages *
# %v NeoMutt version string
# %V Currently active limit pattern, if any *
# %>X Right justify the rest of the string and pad with ``X''
# %|X Pad to the end of the line with ``X''
# %*X Soft-fill with character ``X'' as pad
#
#
# For an explanation of ``soft-fill'', see the $index_format documentation.
#
# * = can be optionally printed if nonzero
#
# Some of the above sequences can be used to optionally print a string
# if their value is nonzero. For example, you may only want to see the
# number of flagged messages if such messages exist, since zero is not
# particularly meaningful. To optionally print a string based upon one
# of the above sequences, the following construct is used:
#
# %?<sequence_char>?<optional_string>?
#
# where sequence_char is a character from the table above, and
# optional_string is the string you would like printed if
# sequence_char is nonzero. optional_string may contain
# other sequences as well as normal text, but you may not nest
# optional strings.
#
# Here is an example illustrating how to optionally print the number of
# new messages in a mailbox:
#
# %?n?%n new messages.?
#
# You can also switch between two strings using the following construct:
#
# %?<sequence_char>?<if_string>&<else_string>?
#
# If the value of sequence_char is non-zero, if_string will
# be expanded, otherwise else_string will be expanded.
#
# You can force the result of any printf(3)-like sequence to be lowercase
# by prefixing the sequence character with an underscore (``_'') sign.
# For example, if you want to display the local hostname in lowercase,
# you would use: ``%_h''.
#
# If you prefix the sequence character with a colon (``:'') character, NeoMutt
# will replace any dots in the expansion by underscores. This might be helpful
# with IMAP folders that don't like dots in folder names.
#
#
# set status_on_top=no
#
# Name: status_on_top
# Type: boolean
# Default: no
#
#
# Setting this variable causes the ``status bar'' to be displayed on
# the first line of the screen rather than near the bottom. If $help
# is set, too it'll be placed at the bottom.
#
#
# set strict_threads=no
#
# Name: strict_threads
# Type: boolean
# Default: no
#
#
# If set, threading will only make use of the ``In-Reply-To'' and
# ``References:'' fields when you $sort by message threads. By
# default, messages with the same subject are grouped together in
# ``pseudo threads.''. This may not always be desirable, such as in a
# personal mailbox where you might have several unrelated messages with
# the subjects like ``hi'' which will get grouped together. See also
# $sort_re for a less drastic way of controlling this
# behavior.
#
#
# set suspend=yes
#
# Name: suspend
# Type: boolean
# Default: yes
#
#
# When unset, NeoMutt won't stop when the user presses the terminal's
# susp key, usually ``^Z''. This is useful if you run NeoMutt
# inside an xterm using a command like ``xterm -e neomutt''.
#
#
# set text_flowed=no
#
# Name: text_flowed
# Type: boolean
# Default: no
#
#
# When set, NeoMutt will generate ``format=flowed'' bodies with a content type
# of ``text/plain; format=flowed''.
# This format is easier to handle for some mailing software, and generally
# just looks like ordinary text. To actually make use of this format's
# features, you'll need support in your editor.
#
# Note that $indent_string is ignored when this option is set.
#
#
# set thorough_search=yes
#
# Name: thorough_search
# Type: boolean
# Default: yes
#
#
# Affects the ~b and ~h search operations described in
# section ``patterns''. If set, the headers and body/attachments of
# messages to be searched are decoded before searching. If unset,
# messages are searched as they appear in the folder.
#
# Users searching attachments or for non-ASCII characters should set
# this value because decoding also includes MIME parsing/decoding and possible
# character set conversions. Otherwise NeoMutt will attempt to match against the
# raw message received (for example quoted-printable encoded or with encoded
# headers) which may lead to incorrect search results.
#
#
# set thread_received=no
#
# Name: thread_received
# Type: boolean
# Default: no
#
#
# When set, NeoMutt uses the date received rather than the date sent
# to thread messages by subject.
#
#
# set tilde=no
#
# Name: tilde
# Type: boolean
# Default: no
#
#
# When set, the internal-pager will pad blank lines to the bottom of the
# screen with a tilde (``~'').
#
#
# set time_inc=0
#
# Name: time_inc
# Type: number
# Default: 0
#
#
# Along with $read_inc, $write_inc, and $net_inc, this
# variable controls the frequency with which progress updates are
# displayed. It suppresses updates less than $time_inc milliseconds
# apart. This can improve throughput on systems with slow terminals,
# or when running NeoMutt on a remote system.
#
# Also see the ``tuning'' section of the manual for performance considerations.
#
#
# set timeout=600
#
# Name: timeout
# Type: number
# Default: 600
#
#
# When NeoMutt is waiting for user input either idling in menus or
# in an interactive prompt, NeoMutt would block until input is
# present. Depending on the context, this would prevent certain
# operations from working, like checking for new mail or keeping
# an IMAP connection alive.
#
# This variable controls how many seconds NeoMutt will at most wait
# until it aborts waiting for input, performs these operations and
# continues to wait for input.
#
# A value of zero or less will cause NeoMutt to never time out.
#
#
# set tmpdir="/tmp"
#
# Name: tmpdir
# Type: path
# Default: "/tmp"
#
#
# This variable allows you to specify where NeoMutt will place its
# temporary files needed for displaying and composing messages.
#
# If this variable is not set, the environment variable $TMPDIR is
# used. Failing that, then ``/tmp'' is used.
#
#
# set to_chars=" +TCFL"
#
# Name: to_chars
# Type: string
# Default: " +TCFL"
#
#
# Controls the character used to indicate mail addressed to you.
# Character Default Description
# 1 <space> The mail is not addressed to your address.
# 2 + You are the only recipient of the message.
# 3 T Your address appears in the ``To:'' header field, but you are not the only recipient of the message.
# 4 C Your address is specified in the ``Cc:'' header field, but you are not the only recipient.
# 5 F Indicates the mail that was sent by you.
# 6 L Indicates the mail was sent to a mailing-list you subscribe to.
#
#
# set trash=""
#
# Name: trash
# Type: path
# Default: ""
#
#
# If set, this variable specifies the path of the trash folder where the
# mails marked for deletion will be moved, instead of being irremediably
# purged.
#
# NOTE: When you delete a message in the trash folder, it is really
# deleted, so that you have a way to clean the trash.
#
#
# set ts_enabled=no
#
# Name: ts_enabled
# Type: boolean
# Default: no
#
#
# Controls whether NeoMutt tries to set the terminal status line and icon name.
# Most terminal emulators emulate the status line in the window title.
#
#
# set ts_icon_format="M%?n?AIL&ail?"
#
# Name: ts_icon_format
# Type: string
# Default: "M%?n?AIL&ail?"
#
#
# Controls the format of the icon title, as long as ``$ts_enabled'' is set.
# This string is identical in formatting to the one used by
# ``$status_format''.
#
#
# set ts_status_format="NeoMutt with %?m?%m messages&no messages?%?n? [%n NEW]?"
#
# Name: ts_status_format
# Type: string
# Default: "NeoMutt with %?m?%m messages&no messages?%?n? [%n NEW]?"
#
#
# Controls the format of the terminal status line (or window title),
# provided that ``$ts_enabled'' has been set. This string is identical in
# formatting to the one used by ``$status_format''.
#
#
# set tunnel=""
#
# Name: tunnel
# Type: string
# Default: ""
#
#
# Setting this variable will cause NeoMutt to open a pipe to a command
# instead of a raw socket. You may be able to use this to set up
# preauthenticated connections to your IMAP/POP3/SMTP server. Example:
# set tunnel="ssh -q mailhost.net /usr/local/libexec/imapd"
#
# Note: For this example to work you must be able to log in to the remote
# machine without having to enter a password.
#
# When set, NeoMutt uses the tunnel for all remote connections.
# Please see ``account-hook'' in the manual for how to use different
# tunnel commands per connection.
#
#
# set uncollapse_jump=no
#
# Name: uncollapse_jump
# Type: boolean
# Default: no
#
#
# When set, NeoMutt will jump to the next unread message, if any,
# when the current thread is uncollapsed.
#
#
# set uncollapse_new=yes
#
# Name: uncollapse_new
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will automatically uncollapse any collapsed thread
# that receives a new message. When unset, collapsed threads will
# remain collapsed. the presence of the new message will still affect
# index sorting, though.
#
#
# set use_8bitmime=no
#
# Name: use_8bitmime
# Type: boolean
# Default: no
#
#
# Warning: do not set this variable unless you are using a version
# of sendmail which supports the -B8BITMIME flag (such as sendmail
# 8.8.x) or you may not be able to send mail.
#
# When set, NeoMutt will invoke $sendmail with the -B8BITMIME
# flag when sending 8-bit messages to enable ESMTP negotiation.
#
#
# set use_domain=yes
#
# Name: use_domain
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will qualify all local addresses (ones without the
# ``@host'' portion) with the value of $hostname. If unset, no
# addresses will be qualified.
#
#
# set use_envelope_from=no
#
# Name: use_envelope_from
# Type: boolean
# Default: no
#
#
# When set, NeoMutt will set the envelope sender of the message.
# If $envelope_from_address is set, it will be used as the sender
# address. If unset, NeoMutt will attempt to derive the sender from the
# ``From:'' header.
#
# Note that this information is passed to sendmail command using the
# -f command line switch. Therefore setting this option is not useful
# if the $sendmail variable already contains -f or if the
# executable pointed to by $sendmail doesn't support the -f switch.
#
#
set use_from=yes
#
# Name: use_from
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will generate the ``From:'' header field when
# sending messages. If unset, no ``From:'' header field will be
# generated unless the user explicitly sets one using the ``my_hdr''
# command.
#
#
# set use_ipv6=yes
#
# Name: use_ipv6
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will look for IPv6 addresses of hosts it tries to
# contact. If this option is unset, NeoMutt will restrict itself to IPv4 addresses.
# Normally, the default should work.
#
#
# set user_agent=yes
#
# Name: user_agent
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will add a ``User-Agent:'' header to outgoing
# messages, indicating which version of NeoMutt was used for composing
# them.
#
#
# set vfolder_format="%2C %?n?%4n/& ?%4m %f"
#
# Name: vfolder_format
# Type: string
# Default: "%2C %?n?%4n/& ?%4m %f"
#
#
# This variable allows you to customize the file browser display for virtual
# folders to your personal taste. This string uses many of the same
# expandos as $folder_format.
#
#
# set virtual_spoolfile=no
#
# Name: virtual_spoolfile
# Type: boolean
# Default: no
#
#
# When set, NeoMutt will use the first defined virtual mailbox (see
# virtual-mailboxes) as a spool file.
#
#
# set visual="vi"
#
# Name: visual
# Type: command
# Default: "vi"
#
#
# Specifies the visual editor to invoke when the ``~v'' command is
# given in the built-in editor.
#
# $visual is overridden by the environment variable $VISUAL or $EDITOR.
#
#
# set wait_key=yes
#
# Name: wait_key
# Type: boolean
# Default: yes
#
#
# Controls whether NeoMutt will ask you to press a key after an external command
# has been invoked by these functions: <shell-escape>,
# <pipe-message>, <pipe-entry>, <print-message>,
# and <print-entry> commands.
#
# It is also used when viewing attachments with ``auto_view'', provided
# that the corresponding mailcap entry has a needsterminal flag,
# and the external program is interactive.
#
# When set, NeoMutt will always ask for a key. When unset, NeoMutt will wait
# for a key only if the external command returned a non-zero status.
#
#
# set weed=yes
#
# Name: weed
# Type: boolean
# Default: yes
#
#
# When set, NeoMutt will weed headers when displaying, forwarding,
# printing, or replying to messages.
#
#
# set wrap=0
#
# Name: wrap
# Type: number
# Default: 0
#
#
# When set to a positive value, NeoMutt will wrap text at $wrap characters.
# When set to a negative value, NeoMutt will wrap text so that there are $wrap
# characters of empty space on the right side of the terminal. Setting it
# to zero makes NeoMutt wrap at the terminal width.
#
# Also see $reflow_wrap.
#
#
# set wrap_headers=78
#
# Name: wrap_headers
# Type: number
# Default: 78
#
#
# This option specifies the number of characters to use for wrapping
# an outgoing message's headers. Allowed values are between 78 and 998
# inclusive.
#
# Note: This option usually shouldn't be changed. RFC5233
# recommends a line length of 78 (the default), so please only change
# this setting when you know what you're doing.
#
#
# set wrap_search=yes
#
# Name: wrap_search
# Type: boolean
# Default: yes
#
#
# Controls whether searches wrap around the end.
#
# When set, searches will wrap around the first (or last) item. When
# unset, incremental searches will not wrap.
#
#
# set write_bcc=yes
#
# Name: write_bcc
# Type: boolean
# Default: yes
#
#
# Controls whether NeoMutt writes out the ``Bcc:'' header when preparing
# messages to be sent. Exim users may wish to unset this. If NeoMutt
# is set to deliver directly via SMTP (see $smtp_url), this
# option does nothing: NeoMutt will never write out the ``Bcc:'' header
# in this case.
#
#
# set write_inc=10
#
# Name: write_inc
# Type: number
# Default: 10
#
#
# When writing a mailbox, a message will be printed every
# $write_inc messages to indicate progress. If set to 0, only a
# single message will be displayed before writing a mailbox.
#
# Also see the $read_inc, $net_inc and $time_inc variables and the
# ``tuning'' section of the manual for performance considerations.
#
#
# set x_comment_to=no
#
# Name: x_comment_to
# Type: boolean
# Default: no
#
#
# If set, NeoMutt will add ``X-Comment-To:'' field (that contains full
# name of original article author) to article that followuped to newsgroup.
#
#
# -*-muttrc-*-
# -*-muttrc-*-
# Colors for use with xterm and the like, white background.
# Use default for trasnparent background
color normal black default
color hdrdefault blue default
color quoted blue white
color signature red white
color attachment red white
color prompt brightmagenta default
color message brightred default
color error brightwhite brightred
color indicator brightwhite red
color status brightwhite default
color tree black white
color markers red white
color search white black
color tilde brightmagenta default
color index blue white ~F
color index red white "~N|~O"
# color body brightblack white '\*+[^*]+\*+'
# color body brightblack white '_+[^_]+_+'
Reference in New Issue View Git Blame Copy Permalink