diff --git a/README.md b/README.md
new file mode 100644
index 0000000..2abcafe
--- /dev/null
+++ b/README.md
@@ -0,0 +1,67 @@
+# serial-to-tcp
+
+An app which reads data from a serial port and serves it on a TCP port.
+
+## How to use
+
+Clone this repo and build the app as outlined below (artifacts may be provided in the future).
+
+The app takes its configuration from the command line. Multiple instances of the app can be executed at once. The app can serve multiple clients at once.
+
+Root privileges are most likely needed to open the serial device (and to open a port under < 1024, if applicable).
+
+### Example
+
+Read from USB device `ttyUSB0` with a baud rate of 115200, and serve the data on TCP port 2022:
+
+```bash
+serial-to-tcp -s /dev/ttyUSB0 -b 115200 -p 2022
+```
+
+On another client in the network, assuming the server has the IP address `192.168.0.123`, test reading from the TCP port, e.g. using [socat](http://www.dest-unreach.org/socat/):
+
+```bash
+socat - TCP4:192.168.0.123:2022
+```
+
+### Usage
+
+```
+USAGE:
+    serial-to-tcp [OPTIONS] --serial-device <path> --baud-rate <number> --port <number>
+
+OPTIONS:
+    -n                            (optional) If set, do not poll the serial device: If the device
+                                  is/becomes unavailable, terminate immediately.
+    -s, --serial-device <path>    The serial device to read from, e.g. /dev/ttyUSB0
+    -b, --baud-rate <number>      The serial baud rate to use, e.g. 115200
+    -a, --address <ip>            The IP (v4 or v6) address to bind to [default: 0.0.0.0]
+    -p, --port <number>           The port to listen on
+    -h, --help                    Print help information
+    -V, --version                 Print version information
+```
+
+## Building
+
+You'll need a [rust toolchain](https://rustup.rs), a recent stable version is recommended.
+
+In the cloned repository:
+
+```bash
+cargo build --release
+```
+
+### Cross-building
+
+For targetting another platform, you could manually install the required toolchain and build respectively, e.g.:
+
+```bash
+cargo build --target=arm-unknown-linux-musleabihf
+```
+
+An easier way, if you have Podman or Docker installed, may be using [cross](https://github.com/cross-rs/cross), e.g.:
+
+```bash
+cargo install cross
+cross build --target=arm-unknown-linux-musleabihf
+```