lokinet/llarp/net/ip_packet.hpp

287 lines
5.8 KiB
C++
Raw Normal View History

#ifndef LLARP_IP_HPP
#define LLARP_IP_HPP
2019-01-11 02:19:36 +01:00
#include <ev/ev.h>
#include <net/net.hpp>
2019-02-03 00:12:42 +01:00
#include <util/buffer.hpp>
#include <util/time.hpp>
2018-09-19 15:24:36 +02:00
#ifndef _WIN32
// unix, linux
2018-09-21 16:36:06 +02:00
#include <sys/types.h> // FreeBSD needs this for uchar for ip.h
#include <netinet/in.h>
#include <netinet/ip.h>
// anything not win32
struct ip_header
{
#ifdef __LITTLE_ENDIAN__
unsigned int ihl : 4;
unsigned int version : 4;
#elif defined(__BIG_ENDIAN__)
unsigned int version : 4;
unsigned int ihl : 4;
#else
#error "Please fix <bits/endian.h>"
#endif
#if defined(__linux__)
#define ip_version version
#endif
uint8_t tos;
uint16_t tot_len;
uint16_t id;
uint16_t frag_off;
uint8_t ttl;
uint8_t protocol;
uint16_t check;
uint32_t saddr;
uint32_t daddr;
};
#else
// windows nt
#include <winsock2.h>
typedef struct ip_hdr
{
unsigned char ip_header_len : 4; // 4-bit header length (in 32-bit words) normally=5
// (Means 20 Bytes may be 24 also)
unsigned char version : 4; // 4-bit IPv4 version
unsigned char ip_tos; // IP type of service
unsigned short ip_total_length; // Total length
unsigned short ip_id; // Unique identifier
2018-08-20 12:52:47 +02:00
unsigned char ip_frag_offset : 5; // Fragment offset field
2018-08-20 12:52:47 +02:00
unsigned char ip_more_fragment : 1;
unsigned char ip_dont_fragment : 1;
unsigned char ip_reserved_zero : 1;
2018-08-20 12:52:47 +02:00
unsigned char ip_frag_offset1; // fragment offset
2018-08-20 12:52:47 +02:00
unsigned char ip_ttl; // Time to live
unsigned char ip_protocol; // Protocol(TCP,UDP etc)
unsigned short ip_checksum; // IP checksum
unsigned int ip_srcaddr; // Source address
unsigned int ip_destaddr; // Source address
} IPV4_HDR;
#define ip_header IPV4_HDR
2018-08-21 20:31:42 +02:00
#define saddr ip_srcaddr
#define daddr ip_destaddr
2018-08-21 20:33:27 +02:00
#define check ip_checksum
2018-08-21 15:02:05 +02:00
#define ihl ip_header_len
#define protocol ip_protocol
#define frag_off ip_frag_offset
2020-06-13 00:34:53 +02:00
#define tos ip_tos
#define ttl ip_ttl
#define tot_len ip_total_length
2018-09-19 15:24:36 +02:00
#endif
2020-06-17 15:07:05 +02:00
struct ipv6_header_preamble
2019-06-11 18:44:05 +02:00
{
unsigned char version : 4;
unsigned char pad_small : 4;
2019-06-11 23:28:55 +02:00
uint8_t pad[3];
2020-06-17 15:07:05 +02:00
};
struct ipv6_header
{
Config file improvements (#1397) * Config file API/comment improvements API improvements: ================= Make the config API use position-independent tag parameters (Required, Default{123}, MultiValue) rather than a sequence of bools with overloads. For example, instead of: conf.defineOption<int>("a", "b", false, true, 123, [] { ... }); you now write: conf.defineOption<int>("a", "b", MultiValue, Default{123}, [] { ... }); The tags are: - Required - MultiValue - Default{value} plus new abilities (see below): - Hidden - RelayOnly - ClientOnly - Comment{"line1", "line2", "line3"} Made option definition more powerful: ===================================== - `Hidden` allows you to define an option that won't show up in the generated config file if it isn't set. - `RelayOnly`/`ClientOnly` sets up an option that is only accepted and only shows up for relay or client configs. (If neither is specified the option shows up in both modes). - `Comment{...}` lets the option comments be specified as part of the defineOption. Comment improvements ==================== - Rewrote comments for various options to expand on details. - Inlined all the comments with the option definitions. - Several options that were missing comments got comments added. - Made various options for deprecated and or internal options hidden by default so that they don't show up in a default config file. - show the section comment (but not option comments) *after* the [section] tag instead of before it as it makes more sense that way (particularly for the [bind] section which has a new long comment to describe how it works). Disable profiling by default ============================ We had this weird state where we use and store profiling by default but never *load* it when starting up. This commit makes us just not use profiling at all unless explicitly enabled. Other misc changes: =================== - change default worker threads to 0 (= num cpus) instead of 1, and fix it to allow 0. - Actually apply worker-threads option - fixed default data-dir value erroneously having quotes around it - reordered ifname/ifaddr/mapaddr (was previously mapaddr/ifaddr/ifname) as mapaddr is a sort of specialization of ifaddr and so makes more sense to come after it (particularly because it now references ifaddr in its help message). - removed peer-stats option (since we always require it for relays and never use it for clients) - removed router profiles filename option (this doesn't need to be configurable) - removed defunct `service-node-seed` option - Change default logging output file to "" (which means stdout), and also made "-" work for stdout. * Router hive compilation fixes * Comments for SNApp SRV settings in ini file * Add extra blank line after section comments * Better deprecated option handling Allow {client,relay}-only options in {relay,client} configs to be specified as implicitly deprecated options: they warn, and don't set anything. Add an explicit `Deprecated` tag and move deprecated option handling into definition.cpp. * Move backwards compat options into section definitions Keep the "addBackwardsCompatibleConfigOptions" only for options in sections that no longer exist. * Fix INI parsing issues & C++17-ify - don't allow inline comments because it seems they aren't allowed in ini formats in general, and is going to cause problems if there is a comment character in a value (e.g. an exit auth string). Additionally it was breaking on a line such as: # some comment; see? because it was treating only `; see?` as the comment and then producing an error message about the rest of the line being invalid. - make section parsing stricter: the `[` and `]` have to be at the beginning at end of the line now (after stripping whitespace). - Move whitespace stripping to the top since everything in here does it. - chop off string_view suffix/prefix rather than maintaining position values - fix potential infinite loop/segfault when given a line such as `]foo[` * Make config parsing failure fatal Load() LogError's and returns false on failure, so we weren't aborting on config file errors. * Formatting: allow `{}` for empty functions/structs Instead of using two lines when empty: { } * Make default dns bind 127.0.0.1 on non-Linux * Don't show empty section; fix tests We can conceivably have sections that only make sense for clients or relays, and so want to completely omit that section if we have no options for the type of config being generated. Also fixes missing empty lines between tests. Co-authored-by: Thomas Winget <tewinget@gmail.com>
2020-10-08 00:22:58 +02:00
union
{
2020-06-17 15:07:05 +02:00
ipv6_header_preamble preamble;
uint32_t flowlabel;
} preamble;
2019-06-11 20:23:53 +02:00
uint16_t payload_len;
uint8_t proto;
uint8_t hoplimit;
2019-06-11 18:44:05 +02:00
in6_addr srcaddr;
in6_addr dstaddr;
2020-06-17 15:07:05 +02:00
/// get 20 bit truncated flow label in network order
llarp::nuint32_t
FlowLabel() const;
/// put 20 bit truncated flow label network order
void
FlowLabel(llarp::nuint32_t flowlabel);
2019-06-11 18:44:05 +02:00
};
#include <memory>
#include <service/protocol_type.hpp>
2019-07-31 01:42:13 +02:00
#include <utility>
struct llarp_ev_loop;
namespace llarp
{
namespace net
{
2019-06-11 18:44:05 +02:00
/// an Packet
struct IPPacket
{
static constexpr size_t MaxSize = 1500;
2018-08-22 17:52:10 +02:00
llarp_time_t timestamp;
size_t sz;
byte_t buf[MaxSize];
ManagedBuffer
2018-08-22 17:52:10 +02:00
Buffer();
2018-08-20 21:12:12 +02:00
ManagedBuffer
2018-11-29 22:19:20 +01:00
ConstBuffer() const;
2018-08-20 21:12:12 +02:00
bool
Load(const llarp_buffer_t& buf);
struct GetTime
{
llarp_time_t
2019-06-11 18:44:05 +02:00
operator()(const IPPacket& pkt) const
{
2018-08-31 16:41:04 +02:00
return pkt.timestamp;
}
};
struct PutTime
{
2019-04-08 14:01:52 +02:00
llarp_ev_loop_ptr loop;
2019-07-31 01:42:13 +02:00
PutTime(llarp_ev_loop_ptr evloop) : loop(std::move(evloop))
Config file improvements (#1397) * Config file API/comment improvements API improvements: ================= Make the config API use position-independent tag parameters (Required, Default{123}, MultiValue) rather than a sequence of bools with overloads. For example, instead of: conf.defineOption<int>("a", "b", false, true, 123, [] { ... }); you now write: conf.defineOption<int>("a", "b", MultiValue, Default{123}, [] { ... }); The tags are: - Required - MultiValue - Default{value} plus new abilities (see below): - Hidden - RelayOnly - ClientOnly - Comment{"line1", "line2", "line3"} Made option definition more powerful: ===================================== - `Hidden` allows you to define an option that won't show up in the generated config file if it isn't set. - `RelayOnly`/`ClientOnly` sets up an option that is only accepted and only shows up for relay or client configs. (If neither is specified the option shows up in both modes). - `Comment{...}` lets the option comments be specified as part of the defineOption. Comment improvements ==================== - Rewrote comments for various options to expand on details. - Inlined all the comments with the option definitions. - Several options that were missing comments got comments added. - Made various options for deprecated and or internal options hidden by default so that they don't show up in a default config file. - show the section comment (but not option comments) *after* the [section] tag instead of before it as it makes more sense that way (particularly for the [bind] section which has a new long comment to describe how it works). Disable profiling by default ============================ We had this weird state where we use and store profiling by default but never *load* it when starting up. This commit makes us just not use profiling at all unless explicitly enabled. Other misc changes: =================== - change default worker threads to 0 (= num cpus) instead of 1, and fix it to allow 0. - Actually apply worker-threads option - fixed default data-dir value erroneously having quotes around it - reordered ifname/ifaddr/mapaddr (was previously mapaddr/ifaddr/ifname) as mapaddr is a sort of specialization of ifaddr and so makes more sense to come after it (particularly because it now references ifaddr in its help message). - removed peer-stats option (since we always require it for relays and never use it for clients) - removed router profiles filename option (this doesn't need to be configurable) - removed defunct `service-node-seed` option - Change default logging output file to "" (which means stdout), and also made "-" work for stdout. * Router hive compilation fixes * Comments for SNApp SRV settings in ini file * Add extra blank line after section comments * Better deprecated option handling Allow {client,relay}-only options in {relay,client} configs to be specified as implicitly deprecated options: they warn, and don't set anything. Add an explicit `Deprecated` tag and move deprecated option handling into definition.cpp. * Move backwards compat options into section definitions Keep the "addBackwardsCompatibleConfigOptions" only for options in sections that no longer exist. * Fix INI parsing issues & C++17-ify - don't allow inline comments because it seems they aren't allowed in ini formats in general, and is going to cause problems if there is a comment character in a value (e.g. an exit auth string). Additionally it was breaking on a line such as: # some comment; see? because it was treating only `; see?` as the comment and then producing an error message about the rest of the line being invalid. - make section parsing stricter: the `[` and `]` have to be at the beginning at end of the line now (after stripping whitespace). - Move whitespace stripping to the top since everything in here does it. - chop off string_view suffix/prefix rather than maintaining position values - fix potential infinite loop/segfault when given a line such as `]foo[` * Make config parsing failure fatal Load() LogError's and returns false on failure, so we weren't aborting on config file errors. * Formatting: allow `{}` for empty functions/structs Instead of using two lines when empty: { } * Make default dns bind 127.0.0.1 on non-Linux * Don't show empty section; fix tests We can conceivably have sections that only make sense for clients or relays, and so want to completely omit that section if we have no options for the type of config being generated. Also fixes missing empty lines between tests. Co-authored-by: Thomas Winget <tewinget@gmail.com>
2020-10-08 00:22:58 +02:00
{}
void
2019-06-11 18:44:05 +02:00
operator()(IPPacket& pkt) const
{
2018-10-29 17:48:36 +01:00
pkt.timestamp = llarp_ev_loop_time_now_ms(loop);
}
};
struct GetNow
{
2019-04-08 14:01:52 +02:00
llarp_ev_loop_ptr loop;
2019-07-31 01:42:13 +02:00
GetNow(llarp_ev_loop_ptr evloop) : loop(std::move(evloop))
Config file improvements (#1397) * Config file API/comment improvements API improvements: ================= Make the config API use position-independent tag parameters (Required, Default{123}, MultiValue) rather than a sequence of bools with overloads. For example, instead of: conf.defineOption<int>("a", "b", false, true, 123, [] { ... }); you now write: conf.defineOption<int>("a", "b", MultiValue, Default{123}, [] { ... }); The tags are: - Required - MultiValue - Default{value} plus new abilities (see below): - Hidden - RelayOnly - ClientOnly - Comment{"line1", "line2", "line3"} Made option definition more powerful: ===================================== - `Hidden` allows you to define an option that won't show up in the generated config file if it isn't set. - `RelayOnly`/`ClientOnly` sets up an option that is only accepted and only shows up for relay or client configs. (If neither is specified the option shows up in both modes). - `Comment{...}` lets the option comments be specified as part of the defineOption. Comment improvements ==================== - Rewrote comments for various options to expand on details. - Inlined all the comments with the option definitions. - Several options that were missing comments got comments added. - Made various options for deprecated and or internal options hidden by default so that they don't show up in a default config file. - show the section comment (but not option comments) *after* the [section] tag instead of before it as it makes more sense that way (particularly for the [bind] section which has a new long comment to describe how it works). Disable profiling by default ============================ We had this weird state where we use and store profiling by default but never *load* it when starting up. This commit makes us just not use profiling at all unless explicitly enabled. Other misc changes: =================== - change default worker threads to 0 (= num cpus) instead of 1, and fix it to allow 0. - Actually apply worker-threads option - fixed default data-dir value erroneously having quotes around it - reordered ifname/ifaddr/mapaddr (was previously mapaddr/ifaddr/ifname) as mapaddr is a sort of specialization of ifaddr and so makes more sense to come after it (particularly because it now references ifaddr in its help message). - removed peer-stats option (since we always require it for relays and never use it for clients) - removed router profiles filename option (this doesn't need to be configurable) - removed defunct `service-node-seed` option - Change default logging output file to "" (which means stdout), and also made "-" work for stdout. * Router hive compilation fixes * Comments for SNApp SRV settings in ini file * Add extra blank line after section comments * Better deprecated option handling Allow {client,relay}-only options in {relay,client} configs to be specified as implicitly deprecated options: they warn, and don't set anything. Add an explicit `Deprecated` tag and move deprecated option handling into definition.cpp. * Move backwards compat options into section definitions Keep the "addBackwardsCompatibleConfigOptions" only for options in sections that no longer exist. * Fix INI parsing issues & C++17-ify - don't allow inline comments because it seems they aren't allowed in ini formats in general, and is going to cause problems if there is a comment character in a value (e.g. an exit auth string). Additionally it was breaking on a line such as: # some comment; see? because it was treating only `; see?` as the comment and then producing an error message about the rest of the line being invalid. - make section parsing stricter: the `[` and `]` have to be at the beginning at end of the line now (after stripping whitespace). - Move whitespace stripping to the top since everything in here does it. - chop off string_view suffix/prefix rather than maintaining position values - fix potential infinite loop/segfault when given a line such as `]foo[` * Make config parsing failure fatal Load() LogError's and returns false on failure, so we weren't aborting on config file errors. * Formatting: allow `{}` for empty functions/structs Instead of using two lines when empty: { } * Make default dns bind 127.0.0.1 on non-Linux * Don't show empty section; fix tests We can conceivably have sections that only make sense for clients or relays, and so want to completely omit that section if we have no options for the type of config being generated. Also fixes missing empty lines between tests. Co-authored-by: Thomas Winget <tewinget@gmail.com>
2020-10-08 00:22:58 +02:00
{}
llarp_time_t
operator()() const
{
return llarp_ev_loop_time_now_ms(loop);
}
};
struct CompareSize
{
bool
2019-06-11 18:44:05 +02:00
operator()(const IPPacket& left, const IPPacket& right)
{
return left.sz < right.sz;
}
};
struct CompareOrder
{
bool
2019-06-11 18:44:05 +02:00
operator()(const IPPacket& left, const IPPacket& right)
{
2018-08-31 16:41:04 +02:00
return left.timestamp < right.timestamp;
}
};
2018-10-10 14:06:28 +02:00
inline ip_header*
Header()
{
2018-09-17 22:18:11 +02:00
return (ip_header*)&buf[0];
}
2018-10-10 14:06:28 +02:00
inline const ip_header*
Header() const
{
2018-09-17 22:18:11 +02:00
return (ip_header*)&buf[0];
}
2019-06-11 18:44:05 +02:00
inline ipv6_header*
HeaderV6()
{
return (ipv6_header*)&buf[0];
}
inline const ipv6_header*
HeaderV6() const
{
2019-06-11 18:44:05 +02:00
return (ipv6_header*)&buf[0];
}
2019-06-11 18:44:05 +02:00
inline int
Version() const
{
2019-06-11 18:44:05 +02:00
return Header()->version;
}
2019-06-11 18:44:05 +02:00
inline bool
IsV4() const
{
2019-06-11 18:44:05 +02:00
return Version() == 4;
}
2019-06-11 18:44:05 +02:00
inline bool
IsV6() const
{
2019-06-11 18:44:05 +02:00
return Version() == 6;
}
2019-06-11 18:44:05 +02:00
inline service::ProtocolType
ServiceProtocol() const
{
if (IsV4())
2019-06-11 18:44:05 +02:00
return service::eProtocolTrafficV4;
if (IsV6())
2019-06-11 18:44:05 +02:00
return service::eProtocolTrafficV6;
2019-07-31 01:42:13 +02:00
return service::eProtocolControl;
2019-06-11 18:44:05 +02:00
}
huint128_t
srcv6() const;
huint128_t
dstv6() const;
huint32_t
srcv4() const;
huint32_t
dstv4() const;
huint128_t
src4to6() const;
huint128_t
dst4to6() const;
huint128_t
src4to6Lan() const;
huint128_t
dst4to6Lan() const;
2018-08-20 21:12:12 +02:00
void
2019-06-11 22:56:48 +02:00
UpdateIPv4Address(nuint32_t src, nuint32_t dst);
2018-10-09 16:09:03 +02:00
void
2020-06-17 15:07:05 +02:00
UpdateIPv6Address(
huint128_t src, huint128_t dst, std::optional<nuint32_t> flowlabel = std::nullopt);
2020-05-21 16:18:23 +02:00
/// set addresses to zero and recacluate checksums
void
2020-06-17 15:07:05 +02:00
ZeroAddresses(std::optional<nuint32_t> flowlabel = std::nullopt);
2020-05-21 16:18:23 +02:00
/// zero out source address
void
2020-06-17 15:07:05 +02:00
ZeroSourceAddress(std::optional<nuint32_t> flowlabel = std::nullopt);
2020-05-21 16:18:23 +02:00
/// make an icmp unreachable reply packet based of this ip packet
std::optional<IPPacket>
MakeICMPUnreachable() const;
};
} // namespace net
} // namespace llarp
#endif