2019-04-12 06:36:43 +02:00
// Copyright (c) 2014-2019, The Monero Project
2018-04-10 06:49:20 +02:00
// Copyright (c) 2018, The Loki Project
2015-12-14 05:54:39 +01:00
//
2014-10-07 01:46:25 +02:00
// All rights reserved.
2015-12-14 05:54:39 +01:00
//
2014-10-07 01:46:25 +02:00
// Redistribution and use in source and binary forms, with or without modification, are
// permitted provided that the following conditions are met:
2015-12-14 05:54:39 +01:00
//
2014-10-07 01:46:25 +02:00
// 1. Redistributions of source code must retain the above copyright notice, this list of
// conditions and the following disclaimer.
2015-12-14 05:54:39 +01:00
//
2014-10-07 01:46:25 +02:00
// 2. Redistributions in binary form must reproduce the above copyright notice, this list
// of conditions and the following disclaimer in the documentation and/or other
// materials provided with the distribution.
2015-12-14 05:54:39 +01:00
//
2014-10-07 01:46:25 +02:00
// 3. Neither the name of the copyright holder nor the names of its contributors may be
// used to endorse or promote products derived from this software without specific
// prior written permission.
2015-12-14 05:54:39 +01:00
//
2014-10-07 01:46:25 +02:00
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
2015-12-14 05:54:39 +01:00
//
2014-10-07 01:46:25 +02:00
// Parts of this file are originally copyright (c) 2012-2013 The Cryptonote developers
# include <algorithm>
# include <cstdio>
2014-10-28 04:44:45 +01:00
# include <boost/filesystem.hpp>
2020-05-29 23:23:39 +02:00
# include <boost/endian/conversion.hpp>
2014-10-07 01:46:25 +02:00
2018-08-03 03:39:28 +02:00
# include "common/rules.h"
2014-10-07 01:46:25 +02:00
# include "include_base_utils.h"
2017-01-26 16:07:23 +01:00
# include "cryptonote_basic/cryptonote_basic_impl.h"
2019-06-27 11:15:58 +02:00
# include "cryptonote_core/cryptonote_tx_utils.h"
2014-10-28 04:44:45 +01:00
# include "tx_pool.h"
2014-10-07 01:46:25 +02:00
# include "blockchain.h"
2015-03-06 21:20:45 +01:00
# include "blockchain_db/blockchain_db.h"
2017-01-26 16:07:23 +01:00
# include "cryptonote_basic/cryptonote_boost_serialization.h"
2014-10-07 01:46:25 +02:00
# include "cryptonote_config.h"
2017-01-26 16:07:23 +01:00
# include "cryptonote_basic/miner.h"
2014-10-07 01:46:25 +02:00
# include "misc_language.h"
# include "profile_tools.h"
# include "file_io_utils.h"
2018-11-18 11:17:24 +01:00
# include "int-util.h"
2017-09-14 05:39:37 +02:00
# include "common/threadpool.h"
2014-10-07 01:46:25 +02:00
# include "common/boost_serialization_helper.h"
# include "warnings.h"
# include "crypto/hash.h"
2017-01-26 16:07:23 +01:00
# include "cryptonote_core.h"
2016-06-16 00:37:13 +02:00
# include "ringct/rctSigs.h"
2016-10-10 21:47:52 +02:00
# include "common/perf_timer.h"
2018-09-29 22:18:08 +02:00
# include "common/notify.h"
2019-05-31 03:06:42 +02:00
# include "service_node_voting.h"
2018-06-29 06:47:00 +02:00
# include "service_node_list.h"
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
# include "common/varint.h"
# include "common/pruning.h"
2019-12-24 18:36:52 +01:00
# include "common/lock.h"
2020-06-02 05:47:20 +02:00
# include "common/meta.h"
2020-05-30 06:06:16 +02:00
# include "common/sha256sum.h"
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2020-03-17 05:18:50 +01:00
# ifdef ENABLE_SYSTEMD
extern " C " {
# include <systemd / sd-daemon.h>
}
# endif
2018-04-10 06:49:20 +02:00
# undef LOKI_DEFAULT_LOG_CATEGORY
# define LOKI_DEFAULT_LOG_CATEGORY "blockchain"
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
2017-08-25 22:04:55 +02:00
# define FIND_BLOCKCHAIN_SUPPLEMENT_MAX_SIZE (100*1024*1024) // 100 MB
2017-10-10 16:47:08 +02:00
using namespace crypto ;
2014-10-07 01:46:25 +02:00
//#include "serialization/json_archive.h"
/* TODO:
* Clean up code :
* Possibly change how outputs are referred to / indexed in blockchain and wallets
*
*/
using namespace cryptonote ;
2014-10-30 05:58:14 +01:00
using epee : : string_tools : : pod_to_hex ;
2014-10-07 01:46:25 +02:00
DISABLE_VS_WARNINGS ( 4267 )
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
# define MERROR_VER(x) MCERROR("verify", x)
2016-12-01 11:28:46 +01:00
// used to overestimate the block reward when estimating a per kB to use
# define BLOCK_REWARD_OVERESTIMATE (10 * 1000000000000)
2019-09-10 09:52:52 +02:00
Blockchain : : block_extended_info : : block_extended_info ( const alt_block_data_t & src , block const & blk , checkpoint_t const * checkpoint )
{
assert ( ( src . checkpointed ) = = ( checkpoint ! = nullptr ) ) ;
* this = { } ;
this - > bl = blk ;
this - > checkpointed = src . checkpointed ;
if ( checkpoint ) this - > checkpoint = * checkpoint ;
this - > height = src . height ;
this - > block_cumulative_weight = src . cumulative_weight ;
this - > cumulative_difficulty = src . cumulative_difficulty ;
this - > already_generated_coins = src . already_generated_coins ;
}
2014-10-07 01:46:25 +02:00
//------------------------------------------------------------------
2019-05-31 03:06:42 +02:00
Blockchain : : Blockchain ( tx_memory_pool & tx_pool , service_nodes : : service_node_list & service_node_list ) :
2020-08-31 09:45:33 +02:00
m_db ( ) , m_tx_pool ( tx_pool ) , m_hardfork ( NULL ) , m_current_block_cumul_weight_limit ( 0 ) , m_current_block_cumul_weight_median ( 0 ) ,
2019-05-01 08:01:17 +02:00
m_max_prepare_blocks_threads ( 4 ) , m_db_sync_on_blocks ( true ) , m_db_sync_threshold ( 1 ) , m_db_sync_mode ( db_async ) , m_db_default_sync ( false ) , m_fast_sync ( true ) , m_show_time_stats ( false ) , m_sync_counter ( 0 ) , m_bytes_to_sync ( 0 ) , m_cancel ( false ) ,
2019-02-19 12:00:27 +01:00
m_long_term_block_weights_window ( CRYPTONOTE_LONG_TERM_BLOCK_WEIGHT_WINDOW_SIZE ) ,
m_long_term_effective_median_block_weight ( 0 ) ,
2019-03-26 12:51:13 +01:00
m_long_term_block_weights_cache_tip_hash ( crypto : : null_hash ) ,
2019-04-15 02:33:17 +02:00
m_long_term_block_weights_cache_rolling_median ( CRYPTONOTE_LONG_TERM_BLOCK_WEIGHT_WINDOW_SIZE ) ,
Service Node Deregister Part 5 (#89)
* Retrieve quorum list from height, reviewed
* Setup data structures for de/register TX
* Submit and validate partial/full deregisters
* Add P2P relaying of partial deregistration votes
* Code review adjustments for deregistration part 1
- Fix check_tx_semantic
- Remove signature_pod as votes are now stored as blobs. Serialization
overrides don't intefere with crypto::signature anymore.
* deregistration_vote_pool - changed sign/verify interface and removed repeated code
* Misc review, fix sign/verify api, vote threshold
* Deregister/tx edge case handling for combinatoric votes
* core, service_node_list: separated address from service node pubkey
* Retrieve quorum list from height, reviewed
* Setup data structures for de/register TX
* Submit and validate partial/full deregisters
* Add P2P relaying of partial deregistration votes
* Code review adjustments for deregistration part 1
- Fix check_tx_semantic
- Remove signature_pod as votes are now stored as blobs. Serialization
overrides don't intefere with crypto::signature anymore.
* deregistration_vote_pool - changed sign/verify interface and removed repeated code
* Misc review, fix sign/verify api, vote threshold
* Deregister/tx edge case handling for combinatoric votes
* Store service node lists for the duration of deregister lifetimes
* Quorum min/max bug, sort node list, fix node to test list
* Change quorum to store acc pub address, fix oob bug
* Code review for expiring votes, acc keys to pub_key, improve err msgs
* Add early out for is_deregistration_tx and protect against quorum changes
* Remove debug code, fix segfault
* Remove irrelevant check for tx v3 in blockchain, fix >= height for pruning quorum states
Incorrect assumption that a transaction can be kept in the chain if it could
eventually become invalid, because if it were the chain would be split and
eventually these transaction would be dropped. But also that we should not
override the pre-existing logic which handles this case anyway.
2018-07-18 04:42:47 +02:00
m_service_node_list ( service_node_list ) ,
2019-05-24 10:33:19 +02:00
m_btc_valid ( false ) ,
2019-06-01 17:23:22 +02:00
m_batch_success ( true ) ,
m_prepare_height ( 0 )
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2018-12-05 01:12:29 +01:00
Blockchain : : ~ Blockchain ( )
{
2019-01-07 17:31:13 +01:00
try { deinit ( ) ; }
catch ( const std : : exception & e ) { /* ignore */ }
2018-12-05 01:12:29 +01:00
}
//------------------------------------------------------------------
2014-12-06 23:40:33 +01:00
bool Blockchain : : have_tx ( const crypto : : hash & id ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2017-10-29 14:06:45 +01:00
// WARNING: this function does not take m_blockchain_lock, and thus should only call read only
// m_db functions which do not depend on one another (ie, no getheight + gethash(height-1), as
// well as not accessing class members, even read only (ie, m_invalid_blocks). The caller must
// lock if it is otherwise needed.
2015-12-14 06:40:16 +01:00
return m_db - > tx_exists ( id ) ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2014-12-06 23:40:33 +01:00
bool Blockchain : : have_tx_keyimg_as_spent ( const crypto : : key_image & key_im ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2017-10-29 14:06:45 +01:00
// WARNING: this function does not take m_blockchain_lock, and thus should only call read only
// m_db functions which do not depend on one another (ie, no getheight + gethash(height-1), as
// well as not accessing class members, even read only (ie, m_invalid_blocks). The caller must
// lock if it is otherwise needed.
2015-12-14 06:40:16 +01:00
return m_db - > has_key_image ( key_im ) ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
// This function makes sure that each "input" in an input (mixins) exists
// and collects the public key for each from the transaction it was included in
// via the visitor passed to it.
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
template < class visitor_t >
2019-06-11 20:53:46 +02:00
bool Blockchain : : scan_outputkeys_for_indexes ( const txin_to_key & tx_in_to_key , visitor_t & vis , const crypto : : hash & tx_prefix_hash , uint64_t * pmax_related_block_height ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2015-05-02 02:16:48 +02:00
2015-12-14 06:40:16 +01:00
// ND: Disable locking and make method private.
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
//std::unique_lock lock{*this};
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
// verify that the input has key offsets (that it exists properly, really)
if ( ! tx_in_to_key . key_offsets . size ( ) )
return false ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
// cryptonote_format_utils uses relative offsets for indexing to the global
// outputs list. that is to say that absolute offset #2 is absolute offset
// #1 plus relative offset #2.
// TODO: Investigate if this is necessary / why this is done.
std : : vector < uint64_t > absolute_offsets = relative_output_offsets_to_absolute ( tx_in_to_key . key_offsets ) ;
std : : vector < output_data_t > outputs ;
bool found = false ;
auto it = m_scan_table . find ( tx_prefix_hash ) ;
if ( it ! = m_scan_table . end ( ) )
{
auto its = it - > second . find ( tx_in_to_key . k_image ) ;
if ( its ! = it - > second . end ( ) )
{
outputs = its - > second ;
found = true ;
}
}
if ( ! found )
{
2015-12-25 22:59:26 +01:00
try
{
2018-11-07 22:13:00 +01:00
m_db - > get_output_key ( epee : : span < const uint64_t > ( & tx_in_to_key . amount , 1 ) , absolute_offsets , outputs , true ) ;
2017-10-12 14:27:20 +02:00
if ( absolute_offsets . size ( ) ! = outputs . size ( ) )
{
MERROR_VER ( " Output does not exist! amount = " < < tx_in_to_key . amount ) ;
return false ;
}
2015-12-25 22:59:26 +01:00
}
catch ( . . . )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Output does not exist! amount = " < < tx_in_to_key . amount ) ;
2015-12-25 22:59:26 +01:00
return false ;
}
2015-12-14 06:40:16 +01:00
}
else
{
// check for partial results and add the rest if needed;
if ( outputs . size ( ) < absolute_offsets . size ( ) & & outputs . size ( ) > 0 )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MDEBUG ( " Additional outputs needed: " < < absolute_offsets . size ( ) - outputs . size ( ) ) ;
2015-12-14 06:40:16 +01:00
std : : vector < uint64_t > add_offsets ;
std : : vector < output_data_t > add_outputs ;
2018-04-16 01:16:02 +02:00
add_outputs . reserve ( absolute_offsets . size ( ) - outputs . size ( ) ) ;
2015-12-14 06:40:16 +01:00
for ( size_t i = outputs . size ( ) ; i < absolute_offsets . size ( ) ; i + + )
add_offsets . push_back ( absolute_offsets [ i ] ) ;
2015-12-25 22:59:26 +01:00
try
{
2018-11-07 22:13:00 +01:00
m_db - > get_output_key ( epee : : span < const uint64_t > ( & tx_in_to_key . amount , 1 ) , add_offsets , add_outputs , true ) ;
2017-10-12 14:27:20 +02:00
if ( add_offsets . size ( ) ! = add_outputs . size ( ) )
{
MERROR_VER ( " Output does not exist! amount = " < < tx_in_to_key . amount ) ;
return false ;
}
2015-12-25 22:59:26 +01:00
}
catch ( . . . )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Output does not exist! amount = " < < tx_in_to_key . amount ) ;
2015-12-25 22:59:26 +01:00
return false ;
}
2015-12-14 06:40:16 +01:00
outputs . insert ( outputs . end ( ) , add_outputs . begin ( ) , add_outputs . end ( ) ) ;
}
}
size_t count = 0 ;
2018-10-24 02:33:48 +02:00
for ( const uint64_t & i : absolute_offsets )
2015-12-14 06:40:16 +01:00
{
try
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2015-12-14 06:40:16 +01:00
output_data_t output_index ;
try
{
// get tx hash and output index for output
if ( count < outputs . size ( ) )
output_index = outputs . at ( count ) ;
else
output_index = m_db - > get_output_key ( tx_in_to_key . amount , i ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
// call to the passed boost visitor to grab the public key for the output
2016-06-29 20:55:49 +02:00
if ( ! vis . handle_output ( output_index . unlock_time , output_index . pubkey , output_index . commitment ) )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to handle_output for output no = " < < count < < " , with absolute offset " < < i ) ;
2015-12-14 06:40:16 +01:00
return false ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2015-12-14 06:40:16 +01:00
}
catch ( . . . )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Output does not exist! amount = " < < tx_in_to_key . amount < < " , absolute_offset = " < < i ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
// if on last output and pmax_related_block_height not null pointer
if ( + + count = = absolute_offsets . size ( ) & & pmax_related_block_height )
{
// set *pmax_related_block_height to tx block height for this output
auto h = output_index . height ;
if ( * pmax_related_block_height < h )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2015-12-14 06:40:16 +01:00
* pmax_related_block_height = h ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2015-12-14 06:40:16 +01:00
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2015-12-14 06:40:16 +01:00
catch ( const OUTPUT_DNE & e )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Output does not exist: " < < e . what ( ) ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
catch ( const TX_DNE & e )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Transaction does not exist: " < < e . what ( ) ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
}
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2020-07-27 07:52:52 +02:00
uint64_t Blockchain : : get_current_blockchain_height ( bool lock ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2017-10-29 14:06:45 +01:00
// WARNING: this function does not take m_blockchain_lock, and thus should only call read only
// m_db functions which do not depend on one another (ie, no getheight + gethash(height-1), as
// well as not accessing class members, even read only (ie, m_invalid_blocks). The caller must
2020-08-06 09:21:00 +02:00
// lock if it is otherwise needed or set lock to true.
2020-07-27 07:52:52 +02:00
std : : unique_lock lock_ { * this , std : : defer_lock } ;
if ( lock ) lock_ . lock ( ) ;
2015-12-14 06:40:16 +01:00
return m_db - > height ( ) ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2020-01-30 00:03:24 +01:00
bool Blockchain : : load_missing_blocks_into_loki_subsystems ( )
2019-11-27 03:15:06 +01:00
{
2020-02-05 06:48:32 +01:00
uint64_t const snl_height = std : : max ( m_hardfork - > get_earliest_ideal_height_for_version ( network_version_9_service_nodes ) , m_service_node_list . height ( ) + 1 ) ;
uint64_t const lns_height = std : : max ( m_hardfork - > get_earliest_ideal_height_for_version ( network_version_15_lns ) , m_lns_db . height ( ) + 1 ) ;
uint64_t const end_height = m_db - > height ( ) ;
uint64_t const start_height = std : : min ( end_height , std : : min ( lns_height , snl_height ) ) ;
int64_t const total_blocks = static_cast < int64_t > ( end_height ) - static_cast < int64_t > ( start_height ) ;
if ( total_blocks < = 0 ) return true ;
if ( total_blocks > 1 )
2020-03-26 00:45:07 +01:00
MGINFO ( " Loading blocks into loki subsystems, scanning blockchain from height: " < < start_height < < " to: " < < end_height < < " (snl: " < < snl_height < < " , lns: " < < lns_height < < " ) " ) ;
2020-02-05 06:48:32 +01:00
using clock = std : : chrono : : steady_clock ;
using work_time = std : : chrono : : duration < float > ;
int64_t constexpr BLOCK_COUNT = 1000 ;
auto work_start = clock : : now ( ) ;
auto scan_start = work_start ;
work_time lns_duration { } , snl_duration { } , lns_iteration_duration { } , snl_iteration_duration { } ;
std : : vector < std : : pair < cryptonote : : blobdata , cryptonote : : block > > blocks ;
std : : vector < cryptonote : : transaction > txs ;
std : : vector < crypto : : hash > missed_txs ;
for ( int64_t block_count = total_blocks ,
index = 0 ;
block_count > 0 ;
block_count - = BLOCK_COUNT , index + + )
{
if ( index > 0 & & ( index % 10 = = 0 ) )
2019-11-27 03:15:06 +01:00
{
2020-02-05 06:48:32 +01:00
m_service_node_list . store ( ) ;
auto duration = work_time { clock : : now ( ) - work_start } ;
MGINFO ( " ... scanning height " < < start_height + ( index * BLOCK_COUNT ) < < " ( " < < duration . count ( ) < < " s) (snl: " < < snl_iteration_duration . count ( ) < < " s; lns: " < < lns_iteration_duration . count ( ) < < " s) " ) ;
2020-03-17 05:18:50 +01:00
# ifdef ENABLE_SYSTEMD
// Tell systemd that we're doing something so that it should let us continue starting up
// (giving us 120s until we have to send the next notification):
sd_notify ( 0 , ( " EXTEND_TIMEOUT_USEC=120000000 \n STATUS=Recanning blockchain; height " + std : : to_string ( start_height + ( index * BLOCK_COUNT ) ) ) . c_str ( ) ) ;
# endif
2020-02-05 06:48:32 +01:00
work_start = clock : : now ( ) ;
lns_duration + = lns_iteration_duration ;
snl_duration + = snl_iteration_duration ;
lns_iteration_duration = snl_iteration_duration = { } ;
2019-11-27 03:15:06 +01:00
}
2020-02-05 06:48:32 +01:00
blocks . clear ( ) ;
uint64_t height = start_height + ( index * BLOCK_COUNT ) ;
if ( ! get_blocks ( height , static_cast < uint64_t > ( BLOCK_COUNT ) , blocks ) )
2019-11-27 03:15:06 +01:00
{
2020-02-05 06:48:32 +01:00
LOG_ERROR ( " Unable to get checkpointed historical blocks for updating loki subsystems " ) ;
return false ;
2020-01-30 00:03:24 +01:00
}
2019-11-27 03:15:06 +01:00
2020-02-05 06:48:32 +01:00
for ( std : : pair < cryptonote : : blobdata , cryptonote : : block > const & pair : blocks )
2019-11-27 03:15:06 +01:00
{
2020-02-05 06:48:32 +01:00
cryptonote : : block const & blk = pair . second ;
uint64_t block_height = get_block_height ( blk ) ;
2019-11-27 03:15:06 +01:00
2020-02-05 06:48:32 +01:00
txs . clear ( ) ;
missed_txs . clear ( ) ;
if ( ! get_transactions ( blk . tx_hashes , txs , missed_txs ) )
2019-11-27 03:15:06 +01:00
{
2020-02-05 06:48:32 +01:00
MERROR ( " Unable to get transactions for block for updating LNS DB: " < < cryptonote : : get_block_hash ( blk ) ) ;
2019-11-27 03:15:06 +01:00
return false ;
}
2020-02-05 06:48:32 +01:00
if ( block_height > = snl_height )
2019-11-27 03:15:06 +01:00
{
2020-02-05 06:48:32 +01:00
auto snl_start = clock : : now ( ) ;
2019-11-27 03:15:06 +01:00
2020-02-05 06:48:32 +01:00
checkpoint_t * checkpoint_ptr = nullptr ;
checkpoint_t checkpoint ;
if ( blk . major_version > = cryptonote : : network_version_13_enforce_checkpoints & & get_checkpoint ( block_height , checkpoint ) )
checkpoint_ptr = & checkpoint ;
2019-11-27 03:15:06 +01:00
2020-02-05 06:48:32 +01:00
if ( ! m_service_node_list . block_added ( blk , txs , checkpoint_ptr ) )
2019-11-27 03:15:06 +01:00
{
2020-02-05 06:48:32 +01:00
MERROR ( " Unable to process block for updating service node list: " < < cryptonote : : get_block_hash ( blk ) ) ;
return false ;
2019-11-27 03:15:06 +01:00
}
2020-02-05 06:48:32 +01:00
snl_iteration_duration + = clock : : now ( ) - snl_start ;
}
2019-11-27 03:15:06 +01:00
2020-02-05 06:48:32 +01:00
if ( m_lns_db . db & & ( block_height > = lns_height ) )
{
auto lns_start = clock : : now ( ) ;
if ( ! m_lns_db . add_block ( pair . second , txs ) )
2019-11-27 03:15:06 +01:00
{
2020-02-05 06:48:32 +01:00
MERROR ( " Unable to process block for updating LNS DB: " < < cryptonote : : get_block_hash ( pair . second ) ) ;
return false ;
2019-11-27 03:15:06 +01:00
}
2020-02-05 06:48:32 +01:00
lns_iteration_duration + = clock : : now ( ) - lns_start ;
2019-11-27 03:15:06 +01:00
}
}
}
2020-02-05 06:48:32 +01:00
if ( total_blocks > 1 )
2020-01-17 06:31:52 +01:00
{
2020-02-05 06:48:32 +01:00
auto duration = work_time { clock : : now ( ) - scan_start } ;
MGINFO ( " Done recalculating loki subsystems ( " < < duration . count ( ) < < " s) (snl: " < < snl_duration . count ( ) < < " s; lns: " < < lns_duration . count ( ) < < " s) " ) ;
2020-01-17 06:31:52 +01:00
}
2020-02-05 06:48:32 +01:00
if ( total_blocks > 0 )
m_service_node_list . store ( ) ;
return true ;
2020-01-17 06:31:52 +01:00
}
2019-11-27 03:15:06 +01:00
//------------------------------------------------------------------
2014-10-07 01:46:25 +02:00
//FIXME: possibly move this into the constructor, to avoid accidentally
// dereferencing a null BlockchainDB pointer
2019-11-01 01:58:48 +01:00
bool Blockchain : : init ( BlockchainDB * db , sqlite3 * lns_db , const network_type nettype , bool offline , const cryptonote : : test_options * test_options , difficulty_type fixed_difficulty , const GetCheckpointsCallback & get_checkpoints /* = nullptr*/ )
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2018-10-08 12:34:24 +02:00
CHECK_AND_ASSERT_MES ( nettype ! = FAKECHAIN | | test_options , false , " fake chain network type used without options " ) ;
2019-12-24 18:36:52 +01:00
auto lock = tools : : unique_locks ( m_tx_pool , * this ) ;
2015-09-20 19:41:38 +02:00
2015-12-14 06:40:16 +01:00
if ( db = = nullptr )
{
LOG_ERROR ( " Attempted to init Blockchain with null DB " ) ;
return false ;
}
if ( ! db - > is_open ( ) )
{
LOG_ERROR ( " Attempted to init Blockchain with unopened DB " ) ;
2017-12-13 15:04:19 +01:00
delete db ;
2015-12-14 06:40:16 +01:00
return false ;
}
m_db = db ;
2018-11-16 05:13:03 +01:00
# if defined(LOKI_ENABLE_INTEGRATION_TEST_HOOKS)
// NOTE(doyle): Passing in test options in integration mode means we're
// overriding fork heights for any nettype in our integration tests using
// a command line argument. So m_nettype should just be nettype. In
// non-integration test mode passing in test options means you started the
// daemon with --regtest OR you're running core_tests. So don't run core tests
// in integration mode or --regtest
m_nettype = nettype ;
# else
2018-02-16 12:04:04 +01:00
m_nettype = test_options ! = NULL ? FAKECHAIN : nettype ;
2018-11-16 05:13:03 +01:00
# endif
2019-05-01 07:57:41 +02:00
if ( ! m_checkpoints . init ( m_nettype , m_db ) )
throw std : : runtime_error ( " Failed to initialize checkpoints " ) ;
2017-11-30 16:35:52 +01:00
m_offline = offline ;
2018-06-14 21:11:49 +02:00
m_fixed_difficulty = fixed_difficulty ;
2016-02-05 08:05:11 +01:00
if ( m_hardfork = = nullptr )
2018-11-16 05:13:03 +01:00
m_hardfork = new HardFork ( * db , 7 ) ;
2018-11-22 04:42:14 +01:00
2018-11-16 05:13:03 +01:00
if ( test_options ) // Fakechain mode or in integration testing mode we're overriding hardfork dates
2016-02-08 19:47:56 +01:00
{
2018-11-16 05:13:03 +01:00
for ( auto n = 0u ; n < test_options - > hard_forks . size ( ) ; + + n )
{
2018-10-10 08:51:16 +02:00
const auto & hf = test_options - > hard_forks . at ( n ) ;
m_hardfork - > add_fork ( hf . first , hf . second , 0 , n + 1 ) ;
}
2016-02-08 19:47:56 +01:00
}
2015-12-14 06:40:16 +01:00
else
{
2019-09-13 07:46:15 +02:00
for ( const auto & record : HardFork : : get_hardcoded_hard_forks ( m_nettype ) )
2018-11-22 04:42:14 +01:00
{
2019-09-13 07:46:15 +02:00
m_hardfork - > add_fork ( record . version , record . height , record . threshold , record . time ) ;
2018-11-22 04:42:14 +01:00
}
2015-12-14 06:40:16 +01:00
}
2018-11-22 04:42:14 +01:00
2015-12-14 06:40:16 +01:00
m_hardfork - > init ( ) ;
2016-02-08 16:51:57 +01:00
m_db - > set_hard_fork ( m_hardfork ) ;
2015-12-14 06:40:16 +01:00
// if the blockchain is new, add the genesis block
// this feels kinda kludgy to do it this way, but can be looked at later.
// TODO: add function to create and store genesis block,
// taking testnet into account
if ( ! m_db - > height ( ) )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MINFO ( " Blockchain not loaded, generating genesis block. " ) ;
2018-11-19 18:55:53 +01:00
block bl ;
2019-10-31 23:26:58 +01:00
block_verification_context bvc { } ;
2020-08-11 23:55:06 +02:00
generate_genesis_block ( bl , m_nettype ) ;
2019-04-05 11:28:30 +02:00
db_wtxn_guard wtxn_guard ( m_db ) ;
2019-06-26 06:00:05 +02:00
add_new_block ( bl , bvc , nullptr /*checkpoint*/ ) ;
2015-12-14 06:40:16 +01:00
CHECK_AND_ASSERT_MES ( ! bvc . m_verifivation_failed , false , " Failed to add genesis block to blockchain " ) ;
}
// TODO: if blockchain load successful, verify blockchain against both
// hard-coded and runtime-loaded (and enforced) checkpoints.
else
{
}
2014-10-07 01:46:25 +02:00
2018-02-16 12:04:04 +01:00
if ( m_nettype ! = FAKECHAIN )
2015-12-14 06:40:16 +01:00
{
2020-08-27 09:43:08 +02:00
cryptonote : : BlockchainDB : : fixup_context context = { } ;
2020-08-31 09:45:33 +02:00
context . nettype = m_nettype ;
2020-08-27 09:43:08 +02:00
m_db - > fixup ( context ) ;
2015-12-14 06:40:16 +01:00
}
2015-12-06 21:48:17 +01:00
2019-04-05 11:28:30 +02:00
db_rtxn_guard rtxn_guard ( m_db ) ;
2015-12-14 06:40:16 +01:00
// check how far behind we are
uint64_t top_block_timestamp = m_db - > get_top_block_timestamp ( ) ;
uint64_t timestamp_diff = time ( NULL ) - top_block_timestamp ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
// genesis block has no timestamp, could probably change it to have timestamp of 1341378000...
if ( ! top_block_timestamp )
timestamp_diff = time ( NULL ) - 1341378000 ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
// create general purpose async service queue
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
m_async_work_idle = std : : unique_ptr < boost : : asio : : io_service : : work > ( new boost : : asio : : io_service : : work ( m_async_service ) ) ;
2020-06-22 03:51:32 +02:00
m_async_thread = std : : thread { [ this ] { m_async_service . run ( ) ; } } ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
# if defined(PER_BLOCK_CHECKPOINT)
2018-02-16 12:04:04 +01:00
if ( m_nettype ! = FAKECHAIN )
2018-10-09 14:33:39 +02:00
load_compiled_in_block_hashes ( get_checkpoints ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
# endif
2014-10-07 01:46:25 +02:00
2020-08-31 09:45:33 +02:00
// TODO(doyle): I'm not sure that we want to cache difficulty right here
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MINFO ( " Blockchain initialized. last block: " < < m_db - > height ( ) - 1 < < " , " < < epee : : misc_utils : : get_time_interval_string ( timestamp_diff ) < < " time ago, current difficulty: " < < get_difficulty_for_next_block ( ) ) ;
2019-04-05 11:28:30 +02:00
rtxn_guard . stop ( ) ;
2014-10-07 01:46:25 +02:00
2018-05-03 19:04:47 +02:00
uint64_t num_popped_blocks = 0 ;
2018-06-04 13:46:24 +02:00
while ( ! m_db - > is_read_only ( ) )
2018-05-03 19:04:47 +02:00
{
2018-11-20 21:19:39 +01:00
uint64_t top_height ;
const crypto : : hash top_id = m_db - > top_block_hash ( & top_height ) ;
2018-05-03 19:04:47 +02:00
const block top_block = m_db - > get_top_block ( ) ;
const uint8_t ideal_hf_version = get_ideal_hard_fork_version ( top_height ) ;
if ( ideal_hf_version < = 1 | | ideal_hf_version = = top_block . major_version )
{
if ( num_popped_blocks > 0 )
MGINFO ( " Initial popping done, top block: " < < top_id < < " , top height: " < < top_height < < " , block version: " < < ( uint64_t ) top_block . major_version ) ;
break ;
}
else
{
if ( num_popped_blocks = = 0 )
MGINFO ( " Current top block " < < top_id < < " at height " < < top_height < < " has version " < < ( uint64_t ) top_block . major_version < < " which disagrees with the ideal version " < < ( uint64_t ) ideal_hf_version ) ;
if ( num_popped_blocks % 100 = = 0 )
MGINFO ( " Popping blocks... " < < top_height ) ;
+ + num_popped_blocks ;
block popped_block ;
std : : vector < transaction > popped_txs ;
try
{
m_db - > pop_block ( popped_block , popped_txs ) ;
}
// anything that could cause this to throw is likely catastrophic,
// so we re-throw
catch ( const std : : exception & e )
{
MERROR ( " Error popping block from blockchain: " < < e . what ( ) ) ;
throw ;
}
catch ( . . . )
{
MERROR ( " Error popping block from blockchain, throwing! " ) ;
throw ;
}
}
}
if ( num_popped_blocks > 0 )
{
2020-08-31 09:45:33 +02:00
m_cache . m_timestamps_and_difficulties_height = 0 ;
2018-05-03 19:04:47 +02:00
m_hardfork - > reorganize_from_chain_height ( get_current_blockchain_height ( ) ) ;
2019-08-12 01:48:47 +02:00
m_tx_pool . on_blockchain_dec ( ) ;
2018-05-03 19:04:47 +02:00
}
2019-01-21 18:18:50 +01:00
if ( test_options & & test_options - > long_term_block_weight_window )
2019-04-15 02:33:17 +02:00
{
2019-02-19 12:00:27 +01:00
m_long_term_block_weights_window = test_options - > long_term_block_weight_window ;
2019-04-15 02:33:17 +02:00
m_long_term_block_weights_cache_rolling_median = epee : : misc_utils : : rolling_median_t < uint64_t > ( m_long_term_block_weights_window ) ;
}
2019-01-21 18:18:50 +01:00
2019-04-05 11:28:30 +02:00
{
db_txn_guard txn_guard ( m_db , m_db - > is_read_only ( ) ) ;
if ( ! update_next_cumulative_weight_limit ( ) )
return false ;
}
2018-06-29 06:47:00 +02:00
2020-03-27 08:05:55 +01:00
if ( lns_db & & ! m_lns_db . init ( this , nettype , lns_db ) )
2020-01-17 02:32:45 +01:00
{
2020-03-27 08:05:55 +01:00
MERROR ( " LNS failed to initialise " ) ;
return false ;
2019-11-01 01:58:48 +01:00
}
2019-06-13 10:01:08 +02:00
hook_block_added ( m_checkpoints ) ;
hook_blockchain_detached ( m_checkpoints ) ;
2018-06-29 06:47:00 +02:00
for ( InitHook * hook : m_init_hooks )
hook - > init ( ) ;
2020-03-25 09:48:59 +01:00
if ( ! m_db - > is_read_only ( ) & & ! load_missing_blocks_into_loki_subsystems ( ) )
2019-11-27 03:15:06 +01:00
{
MERROR ( " Failed to load blocks into loki subsystems " ) ;
return false ;
}
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2019-11-01 01:58:48 +01:00
bool Blockchain : : init ( BlockchainDB * db , HardFork * & hf , sqlite3 * lns_db , const network_type nettype , bool offline )
2016-02-05 08:05:11 +01:00
{
if ( hf ! = nullptr )
m_hardfork = hf ;
2019-11-01 01:58:48 +01:00
bool res = init ( db , lns_db , nettype , offline , NULL ) ;
2016-02-05 08:05:11 +01:00
if ( hf = = nullptr )
hf = m_hardfork ;
return res ;
}
//------------------------------------------------------------------
2014-10-07 01:46:25 +02:00
bool Blockchain : : store_blockchain ( )
{
2016-10-03 23:11:00 +02:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2015-12-14 06:40:16 +01:00
// lock because the rpc_thread command handler also calls this
Purge epee::critical_crap and CRITICAL_CRAP
This purges epee::critical_region/epee::critical_section and the awful
CRITICAL_REGION_LOCAL and CRITICAL_REGION_LOCAL1 and
CRITICAL_REGION_BEGIN1 and all that crap from epee code.
This wrapper class around a mutex is just painful, macro-infested
indirection that accomplishes nothing (and, worse, forces all using code
to use a std::recursive_mutex even when a different mutex type is more
appropriate).
This commit purges it, replacing the "critical_section" mutex wrappers
with either std::mutex, std::recursive_mutex, or std::shared_mutex as
appropriate. I kept anything that looked uncertain as a
recursive_mutex, simple cases that obviously don't recurse as
std::mutex, and simple cases with reader/writing mechanics as a
shared_mutex.
Ideally all the recursive_mutexes should be eliminated because a
recursive_mutex is almost always a design flaw where someone has let the
locking code get impossibly tangled, but that requires a lot more time
to properly trace down all the ways the mutexes are used.
Other notable changes:
- There was one NIH promise/future-like class here that was used in
example one place in p2p/net_node; I replaced it with a
std::promise/future.
- moved the mutex for LMDB resizing into LMDB itself; having it in the
abstract base class is bad design, and also made it impossible to make a
moveable base class (which gets used for the fake db classes in the test
code).
2020-06-22 21:40:31 +02:00
std : : unique_lock lock { * m_db } ;
2015-12-14 06:40:16 +01:00
TIME_MEASURE_START ( save ) ;
// TODO: make sure sync(if this throws that it is not simply ignored higher
// up the call stack
try
{
m_db - > sync ( ) ;
}
catch ( const std : : exception & e )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR ( std : : string ( " Error syncing blockchain db: " ) + e . what ( ) + " -- shutting down now to prevent issues! " ) ;
2015-12-14 06:40:16 +01:00
throw ;
}
catch ( . . . )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR ( " There was an issue storing the blockchain, shutting down now to prevent issues! " ) ;
2015-12-14 06:40:16 +01:00
throw ;
}
TIME_MEASURE_FINISH ( save ) ;
if ( m_show_time_stats )
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MINFO ( " Blockchain stored OK, took: " < < save < < " ms " ) ;
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
bool Blockchain : : deinit ( )
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MTRACE ( " Stopping blockchain read/write activity " ) ;
2016-10-03 23:11:00 +02:00
// stop async service
m_async_work_idle . reset ( ) ;
2020-06-22 03:51:32 +02:00
m_async_thread . join ( ) ;
2015-12-14 06:40:16 +01:00
m_async_service . stop ( ) ;
// as this should be called if handling a SIGSEGV, need to check
// if m_db is a NULL pointer (and thus may have caused the illegal
// memory operation), otherwise we may cause a loop.
try
{
2018-12-05 01:12:29 +01:00
if ( m_db )
{
m_db - > close ( ) ;
MTRACE ( " Local blockchain read/write activity stopped successfully " ) ;
}
2015-12-14 06:40:16 +01:00
}
catch ( const std : : exception & e )
{
2016-10-03 23:11:00 +02:00
LOG_ERROR ( std : : string ( " Error closing blockchain db: " ) + e . what ( ) ) ;
2015-12-14 06:40:16 +01:00
}
catch ( . . . )
{
2016-10-03 23:11:00 +02:00
LOG_ERROR ( " There was an issue closing/storing the blockchain, shutting down now to prevent issues! " ) ;
2015-12-14 06:40:16 +01:00
}
delete m_hardfork ;
2017-12-13 19:44:18 +01:00
m_hardfork = NULL ;
2015-12-14 06:40:16 +01:00
delete m_db ;
2017-12-13 19:44:18 +01:00
m_db = NULL ;
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2018-11-25 22:08:07 +01:00
// This function removes blocks from the top of blockchain.
// It starts a batch and calls private method pop_block_from_blockchain().
void Blockchain : : pop_blocks ( uint64_t nblocks )
{
2019-07-01 02:10:03 +02:00
uint64_t i = 0 ;
2019-12-24 18:36:52 +01:00
auto lock = tools : : unique_locks ( m_tx_pool , * this ) ;
2018-11-25 22:08:07 +01:00
2019-05-24 10:33:19 +02:00
bool stop_batch = m_db - > batch_start ( ) ;
2018-11-25 22:08:07 +01:00
try
{
2019-05-26 18:50:35 +02:00
const uint64_t blockchain_height = m_db - > height ( ) ;
if ( blockchain_height > 0 )
nblocks = std : : min ( nblocks , blockchain_height - 1 ) ;
2019-08-07 03:43:39 +02:00
uint64_t constexpr PERCENT_PER_PROGRESS_UPDATE = 10 ;
uint64_t const blocks_per_update = ( nblocks / PERCENT_PER_PROGRESS_UPDATE ) ;
tools : : PerformanceTimer timer ;
for ( int progress = 0 ; i < nblocks ; + + i )
2018-11-25 22:08:07 +01:00
{
2019-08-07 03:43:39 +02:00
if ( nblocks > = BLOCKS_EXPECTED_IN_HOURS ( 24 ) & & ( i ! = 0 & & ( i % blocks_per_update = = 0 ) ) )
{
MGINFO ( " ... popping blocks " < < ( + + progress * PERCENT_PER_PROGRESS_UPDATE ) < < " % completed, height: " < < ( blockchain_height - i ) < < " ( " < < timer . seconds ( ) < < " s) " ) ;
timer . reset ( ) ;
}
2018-11-25 22:08:07 +01:00
pop_block_from_blockchain ( ) ;
}
}
catch ( const std : : exception & e )
{
2019-05-24 10:33:19 +02:00
LOG_ERROR ( " Error when popping blocks after processing " < < i < < " blocks: " < < e . what ( ) ) ;
if ( stop_batch )
m_db - > batch_abort ( ) ;
return ;
2018-11-25 22:08:07 +01:00
}
2019-06-26 06:00:05 +02:00
auto split_height = m_db - > height ( ) ;
for ( BlockchainDetachedHook * hook : m_blockchain_detached_hooks )
2019-10-16 01:25:04 +02:00
hook - > blockchain_detached ( split_height , true /*by_pop_blocks*/ ) ;
2020-01-30 00:03:24 +01:00
load_missing_blocks_into_loki_subsystems ( ) ;
2019-06-26 06:00:05 +02:00
2019-05-24 10:33:19 +02:00
if ( stop_batch )
m_db - > batch_stop ( ) ;
2018-11-25 22:08:07 +01:00
}
//------------------------------------------------------------------
2014-10-07 01:46:25 +02:00
// This function tells BlockchainDB to remove the top block from the
// blockchain and then returns all transactions (except the miner tx, of course)
// from it to the tx_pool
block Blockchain : : pop_block_from_blockchain ( )
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2015-12-14 06:40:16 +01:00
2020-08-31 09:45:33 +02:00
m_cache . m_timestamps_and_difficulties_height = 0 ;
2015-12-14 06:40:16 +01:00
block popped_block ;
std : : vector < transaction > popped_txs ;
2019-03-15 11:51:26 +01:00
CHECK_AND_ASSERT_THROW_MES ( m_db - > height ( ) > 1 , " Cannot pop the genesis block " ) ;
2015-12-14 06:40:16 +01:00
try
{
m_db - > pop_block ( popped_block , popped_txs ) ;
}
// anything that could cause this to throw is likely catastrophic,
// so we re-throw
catch ( const std : : exception & e )
{
LOG_ERROR ( " Error popping block from blockchain: " < < e . what ( ) ) ;
throw ;
}
catch ( . . . )
{
LOG_ERROR ( " Error popping block from blockchain, throwing! " ) ;
throw ;
}
2019-01-01 19:26:46 +01:00
// make sure the hard fork object updates its current version
m_hardfork - > on_block_popped ( 1 ) ;
2020-02-05 06:48:32 +01:00
m_lns_db . block_detach ( * this , m_db - > height ( ) ) ;
2019-01-01 19:26:46 +01:00
2015-12-14 06:40:16 +01:00
// return transactions from popped block to the tx_pool
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
size_t pruned = 0 ;
2015-12-14 06:40:16 +01:00
for ( transaction & tx : popped_txs )
{
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
if ( tx . pruned )
{
+ + pruned ;
continue ;
}
2015-12-14 06:40:16 +01:00
if ( ! is_coinbase ( tx ) )
{
2019-10-31 23:26:58 +01:00
cryptonote : : tx_verification_context tvc { } ;
2016-01-29 16:09:17 +01:00
2016-02-08 17:19:24 +01:00
// FIXME: HardFork
// Besides the below, popping a block should also remove the last entry
// in hf_versions.
2019-01-01 19:26:46 +01:00
uint8_t version = get_ideal_hard_fork_version ( m_db - > height ( ) ) ;
2016-01-29 16:09:17 +01:00
2015-12-14 06:40:16 +01:00
// We assume that if they were in a block, the transactions are already
// known to the network as a whole. However, if we had mined that block,
// that might not be always true. Unlikely though, and always relaying
// these again might cause a spike of traffic as many nodes re-relay
// all the transactions in a popped block when a reorg happens.
Generic burn fee checking + blink burn fee checking
This adds the ability for check_fee() to also check the burn amount.
This requires passing extra info through `add_tx()` (and the various
things that call it), so I took the:
bool keeped_by_block, bool relayed, bool do_not_relay
argument triplet, moved it into a struct in tx_pool.h, then added the other fee
options there (along with some static factory functions for generating the
typical sets of option).
The majority of this commit is chasing that change through the codebase and
test suite.
This is used by blink but should also help LNS and other future burn
transactions to verify a burn amount simply when adding the transation to the
mempool. It supports a fixed burn amount, a burn amount as a multiple of the
minimum tx fee, and also allows you to increase the minimum tx fee (so that,
for example, we could require blink txes to pay miners 250% of the usual
minimum (unimportant) priority tx fee.
- Removed a useless core::add_new_tx() overload that wasn't used anywhere.
Blink-specific changes:
(I'd normally separate these into a separate commit, but they got interwoven
fairly heavily with the above change).
- changed the way blink burning is specified so that we have three knobs for
fee adjustment (fixed burn fee; base fee multiple; and required miner tx fee).
The fixed amount is currently 0, base fee is 400%, and require miner tx fee is
simply 100% (i.e. no different than a normal transaction). This is the same as
before this commit, but is changing how they are being specified in
cryptonote_config.h.
- blink tx fee, burn amount, and miner tx fee (if > 100%) now get checked
before signing a blink tx. (These fee checks don't apply to anyone else --
when propagating over the network only the miner tx fee is checked).
- Added a couple of checks for blink quorums: 1) make sure they have reached
the blink hf; 2) make sure the submitted tx version conforms to the current hf
min/max tx version.
- print blink fee information in simplewallet's `fee` output
- add "typical" fee calculations in the `fee` output:
[wallet T6SCwL (has locked stakes)]: fee
Current fee is 0.000000850 loki per byte + 0.020000000 loki per output
No backlog at priority 1
No backlog at priority 2
No backlog at priority 3
No backlog at priority 4
Current blink fee is 0.000004250 loki per byte + 0.100000000 loki per output
Estimated typical small transaction fees: 0.042125000 (unimportant), 0.210625000 (normal), 1.053125000 (elevated), 5.265625000 (priority), 0.210625000 (blink)
where "small" here is the same tx size (2500 bytes + 2 outputs) used to
estimate backlogs.
2019-11-09 04:14:15 +01:00
bool r = m_tx_pool . add_tx ( tx , tvc , tx_pool_options : : from_block ( ) , version ) ;
2015-12-14 06:40:16 +01:00
if ( ! r )
{
LOG_ERROR ( " Error returning transaction to tx_pool " ) ;
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2015-12-14 06:40:16 +01:00
}
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
if ( pruned )
MWARNING ( pruned < < " pruned txes could not be added back to the txpool " ) ;
2018-05-08 23:58:53 +02:00
m_blocks_longhash_table . clear ( ) ;
m_scan_table . clear ( ) ;
m_blocks_txs_check . clear ( ) ;
2019-02-15 14:01:56 +01:00
CHECK_AND_ASSERT_THROW_MES ( update_next_cumulative_weight_limit ( ) , " Error updating next cumulative weight limit " ) ;
2019-08-12 01:48:47 +02:00
m_tx_pool . on_blockchain_dec ( ) ;
2016-04-17 12:04:01 +02:00
invalidate_block_template_cache ( ) ;
2015-12-14 06:40:16 +01:00
return popped_block ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
bool Blockchain : : reset_and_set_genesis_block ( const block & b )
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2020-08-31 09:45:33 +02:00
m_cache . m_timestamps_and_difficulties_height = 0 ;
2016-04-17 12:04:01 +02:00
invalidate_block_template_cache ( ) ;
2015-12-14 06:40:16 +01:00
m_db - > reset ( ) ;
2019-05-08 13:11:23 +02:00
m_db - > drop_alt_blocks ( ) ;
2016-02-08 19:21:42 +01:00
m_hardfork - > init ( ) ;
2014-10-07 01:46:25 +02:00
2018-08-10 06:15:47 +02:00
for ( InitHook * hook : m_init_hooks )
hook - > init ( ) ;
2019-04-05 11:28:30 +02:00
db_wtxn_guard wtxn_guard ( m_db ) ;
2019-10-31 23:26:58 +01:00
block_verification_context bvc { } ;
2019-06-26 06:00:05 +02:00
add_new_block ( b , bvc , nullptr /*checkpoint*/ ) ;
2019-02-15 14:01:56 +01:00
if ( ! update_next_cumulative_weight_limit ( ) )
return false ;
2015-12-14 06:40:16 +01:00
return bvc . m_added_to_main_chain & & ! bvc . m_verifivation_failed ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2014-12-06 23:40:33 +01:00
crypto : : hash Blockchain : : get_tail_id ( uint64_t & height ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2018-11-20 21:19:39 +01:00
return m_db - > top_block_hash ( & height ) ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2014-12-06 23:40:33 +01:00
crypto : : hash Blockchain : : get_tail_id ( ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2017-10-29 14:06:45 +01:00
// WARNING: this function does not take m_blockchain_lock, and thus should only call read only
// m_db functions which do not depend on one another (ie, no getheight + gethash(height-1), as
// well as not accessing class members, even read only (ie, m_invalid_blocks). The caller must
// lock if it is otherwise needed.
2015-12-14 06:40:16 +01:00
return m_db - > top_block_hash ( ) ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2019-11-17 19:27:01 +01:00
/* Builds a list of block hashes representing certain blocks from the blockchain in reverse
* chronological order ; used when synchronizing to verify that a peer ' s chain matches ours .
2014-10-07 01:46:25 +02:00
*
2019-11-17 19:27:01 +01:00
* The blocks chosen for height H , are :
* - the most recent 11 ( H - 1 , H - 2 , . . . , H - 10 , H - 11 )
* - base - 2 exponential drop off from there , so : H - 13 , H - 17 , H - 25 , etc . . . ( going down to , at smallest , height 1 )
* - the genesis block ( height 0 )
2014-10-07 01:46:25 +02:00
*/
2019-11-17 19:27:01 +01:00
void Blockchain : : get_short_chain_history ( std : : list < crypto : : hash > & ids ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2015-12-14 06:40:16 +01:00
uint64_t sz = m_db - > height ( ) ;
if ( ! sz )
2019-11-17 19:27:01 +01:00
return ;
2014-10-30 05:58:14 +01:00
2019-04-05 11:28:30 +02:00
db_rtxn_guard rtxn_guard ( m_db ) ;
2019-11-17 19:27:01 +01:00
for ( uint64_t i = 0 , decr = 1 , offset = 1 ; offset < sz ; + + i )
2015-12-14 06:40:16 +01:00
{
2019-11-17 19:27:01 +01:00
ids . push_back ( m_db - > get_block_hash_from_height ( sz - offset ) ) ;
if ( i > = 10 ) decr * = 2 ;
offset + = decr ;
2015-12-14 06:40:16 +01:00
}
2019-11-17 19:27:01 +01:00
ids . push_back ( m_db - > get_block_hash_from_height ( 0 ) ) ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2014-12-06 23:40:33 +01:00
crypto : : hash Blockchain : : get_block_id_by_height ( uint64_t height ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2017-10-29 14:06:45 +01:00
// WARNING: this function does not take m_blockchain_lock, and thus should only call read only
// m_db functions which do not depend on one another (ie, no getheight + gethash(height-1), as
// well as not accessing class members, even read only (ie, m_invalid_blocks). The caller must
// lock if it is otherwise needed.
2015-12-14 06:40:16 +01:00
try
{
return m_db - > get_block_hash_from_height ( height ) ;
}
catch ( const BLOCK_DNE & e )
{
}
catch ( const std : : exception & e )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR ( std : : string ( " Something went wrong fetching block hash by height: " ) + e . what ( ) ) ;
2015-12-14 06:40:16 +01:00
throw ;
}
catch ( . . . )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR ( std : : string ( " Something went wrong fetching block hash by height " ) ) ;
2015-12-14 06:40:16 +01:00
throw ;
}
return null_hash ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2019-06-01 17:23:22 +02:00
crypto : : hash Blockchain : : get_pending_block_id_by_height ( uint64_t height ) const
{
if ( m_prepare_height & & height > = m_prepare_height & & height - m_prepare_height < m_prepare_nblocks )
return ( * m_prepare_blocks ) [ height - m_prepare_height ] . hash ;
return get_block_id_by_height ( height ) ;
}
//------------------------------------------------------------------
2017-01-22 13:20:55 +01:00
bool Blockchain : : get_block_by_hash ( const crypto : : hash & h , block & blk , bool * orphan ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
// try to find block in main chain
try
{
blk = m_db - > get_block ( h ) ;
2017-01-22 13:20:55 +01:00
if ( orphan )
* orphan = false ;
2015-12-14 06:40:16 +01:00
return true ;
}
// try to find block in alternative chain
catch ( const BLOCK_DNE & e )
{
2019-05-08 13:11:23 +02:00
alt_block_data_t data ;
cryptonote : : blobdata blob ;
2019-09-10 09:52:52 +02:00
if ( m_db - > get_alt_block ( h , & data , & blob , nullptr /*checkpoint*/ ) )
2015-12-14 06:40:16 +01:00
{
2019-05-08 13:11:23 +02:00
if ( ! cryptonote : : parse_and_validate_block_from_blob ( blob , blk ) )
{
MERROR ( " Found block " < < h < < " in alt chain, but failed to parse it " ) ;
throw std : : runtime_error ( " Found block in alt chain, but failed to parse it " ) ;
}
2017-01-22 13:20:55 +01:00
if ( orphan )
* orphan = true ;
2015-12-14 06:40:16 +01:00
return true ;
}
}
catch ( const std : : exception & e )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR ( std : : string ( " Something went wrong fetching block by hash: " ) + e . what ( ) ) ;
2015-12-14 06:40:16 +01:00
throw ;
}
catch ( . . . )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR ( std : : string ( " Something went wrong fetching block hash by hash " ) ) ;
2015-12-14 06:40:16 +01:00
throw ;
}
return false ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
// This function aggregates the cumulative difficulties and timestamps of the
2020-08-31 09:45:33 +02:00
// last DIFFICULTY_WINDOW blocks and passes them to next_difficulty,
2014-10-07 01:46:25 +02:00
// returning the result of that call. Ignores the genesis block, and can use
// less blocks than desired if there aren't enough.
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
difficulty_type Blockchain : : get_difficulty_for_next_block ( )
2014-10-07 01:46:25 +02:00
{
2020-08-31 09:45:33 +02:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2018-06-14 21:11:49 +02:00
if ( m_fixed_difficulty )
{
return m_db - > height ( ) ? m_fixed_difficulty : 1 ;
}
2020-08-31 09:45:33 +02:00
uint8_t const hf_version = get_current_hard_fork_version ( ) ;
2018-03-17 11:15:33 +01:00
crypto : : hash top_hash = get_tail_id ( ) ;
2018-06-06 11:37:26 +02:00
{
2020-08-31 09:45:33 +02:00
std : : unique_lock diff_lock { m_cache . m_difficulty_lock } ;
2018-06-06 11:37:26 +02:00
// we can call this without the blockchain lock, it might just give us
// something a bit out of date, but that's fine since anything which
// requires the blockchain lock will have acquired it in the first place,
// and it will be unlocked only when called from the getinfo RPC
2020-08-31 09:45:33 +02:00
if ( top_hash = = m_cache . m_difficulty_for_next_block_top_hash )
{
if ( hf_version > = cryptonote : : network_version_16 & & pulse : : clock : : now ( ) < m_cache . m_pulse_timings . miner_fallback_timestamp )
return PULSE_FIXED_DIFFICULTY ;
else
return m_cache . m_difficulty_for_next_block ;
}
2018-06-06 11:37:26 +02:00
}
2018-03-17 11:15:33 +01:00
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2020-08-31 09:45:33 +02:00
uint64_t top_block_height = 0 ;
top_hash = get_tail_id ( top_block_height ) ; // get it again now that we have the lock
uint64_t chain_height = top_block_height + 1 ;
bool pulse_override_difficulty = false ;
if ( hf_version > = cryptonote : : network_version_16 )
2015-12-14 06:40:16 +01:00
{
2020-08-31 09:45:33 +02:00
pulse : : get_round_timings ( * this , chain_height , m_cache . m_pulse_timings ) ;
pulse_override_difficulty = ( pulse : : clock : : now ( ) < m_cache . m_pulse_timings . miner_fallback_timestamp ) ;
}
2015-12-14 06:40:16 +01:00
2020-08-31 09:45:33 +02:00
difficulty_type diff = { } ;
m_cache . m_timestamps_and_difficulties_height = chain_height ;
2015-12-14 06:40:16 +01:00
2020-08-31 09:45:33 +02:00
if ( pulse_override_difficulty )
{
// All blocks generated by a Quorum in Pulse have difficulty fixed to
// 1'000'000 such that, when we have to fallback to PoW difficulty is
// a reasonable value to allow continuing the network onwards.
diff = PULSE_FIXED_DIFFICULTY ;
}
else
{
m_db - > fill_timestamps_and_difficulties_for_pow (
m_nettype , m_cache . m_timestamps , m_cache . m_difficulties , chain_height , m_cache . m_timestamps_and_difficulties_height ) ;
diff = next_difficulty_v2 ( m_cache . m_timestamps ,
m_cache . m_difficulties ,
tools : : to_seconds ( TARGET_BLOCK_TIME ) ,
difficulty_mode ( m_nettype , hf_version , chain_height ) ) ;
2015-12-14 06:40:16 +01:00
}
2019-06-27 09:05:32 +02:00
2020-08-31 09:45:33 +02:00
std : : unique_lock diff_lock { m_cache . m_difficulty_lock } ;
m_cache . m_difficulty_for_next_block_top_hash = top_hash ;
m_cache . m_difficulty_for_next_block = diff ;
2018-03-17 11:15:33 +01:00
return diff ;
2014-10-07 01:46:25 +02:00
}
2018-06-29 06:47:00 +02:00
//------------------------------------------------------------------
2018-09-20 15:31:45 +02:00
std : : vector < time_t > Blockchain : : get_last_block_timestamps ( unsigned int blocks ) const
{
uint64_t height = m_db - > height ( ) ;
2018-12-18 19:46:07 +01:00
if ( blocks > height )
blocks = height ;
std : : vector < time_t > timestamps ( blocks ) ;
2018-09-20 15:31:45 +02:00
while ( blocks - - )
timestamps [ blocks ] = m_db - > get_block_timestamp ( height - blocks - 1 ) ;
return timestamps ;
}
//------------------------------------------------------------------
2014-10-07 01:46:25 +02:00
// This function removes blocks from the blockchain until it gets to the
// position where the blockchain switch started and then re-adds the blocks
// that had been removed.
2019-09-10 09:52:52 +02:00
bool Blockchain : : rollback_blockchain_switching ( const std : : list < block_and_checkpoint > & original_chain , uint64_t rollback_height )
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2014-10-07 01:46:25 +02:00
2015-12-25 23:01:21 +01:00
// fail if rollback_height passed is too high
if ( rollback_height > m_db - > height ( ) )
{
return true ;
}
2020-08-31 09:45:33 +02:00
m_cache . m_timestamps_and_difficulties_height = 0 ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
// remove blocks from blockchain until we get back to where we should be.
while ( m_db - > height ( ) ! = rollback_height )
{
pop_block_from_blockchain ( ) ;
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2018-08-28 04:02:43 +02:00
// Revert all changes from switching to the alt chain before adding the original chain back in
for ( BlockchainDetachedHook * hook : m_blockchain_detached_hooks )
2019-10-16 01:25:04 +02:00
hook - > blockchain_detached ( rollback_height , false /*by_pop_blocks*/ ) ;
2020-01-30 00:03:24 +01:00
load_missing_blocks_into_loki_subsystems ( ) ;
2018-08-28 04:02:43 +02:00
2016-12-13 03:13:23 +01:00
// make sure the hard fork object updates its current version
m_hardfork - > reorganize_from_chain_height ( rollback_height ) ;
2015-12-14 06:40:16 +01:00
//return back original chain
2019-09-10 09:52:52 +02:00
for ( auto & entry : original_chain )
2015-12-14 06:40:16 +01:00
{
2019-10-31 23:26:58 +01:00
block_verification_context bvc { } ;
2020-05-28 07:36:46 +02:00
bool r = handle_block_to_main_chain ( entry . block , cryptonote : : get_block_hash ( entry . block ) , bvc , entry . checkpointed ? & entry . checkpoint : nullptr , false ) ;
2015-12-14 06:40:16 +01:00
CHECK_AND_ASSERT_MES ( r & & bvc . m_added_to_main_chain , false , " PANIC! failed to add (again) block while chain switching during the rollback! " ) ;
}
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
m_hardfork - > reorganize_from_chain_height ( rollback_height ) ;
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MINFO ( " Rollback to height " < < rollback_height < < " was successful. " ) ;
2018-11-23 14:25:15 +01:00
if ( ! original_chain . empty ( ) )
2015-12-14 06:40:16 +01:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MINFO ( " Restoration to previous blockchain successful as well. " ) ;
2015-12-14 06:40:16 +01:00
}
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2019-12-26 07:38:00 +01:00
bool Blockchain : : blink_rollback ( uint64_t rollback_height )
{
auto lock = tools : : unique_locks ( m_tx_pool , * this ) ;
bool stop_batch = m_db - > batch_start ( ) ;
MDEBUG ( " Rolling back to height " < < rollback_height ) ;
bool ret = rollback_blockchain_switching ( { } , rollback_height ) ;
if ( stop_batch )
m_db - > batch_stop ( ) ;
return ret ;
}
//------------------------------------------------------------------
2014-10-07 01:46:25 +02:00
// This function attempts to switch to an alternate chain, returning
// boolean based on success therein.
2019-09-10 09:52:52 +02:00
bool Blockchain : : switch_to_alternative_blockchain ( const std : : list < block_extended_info > & alt_chain , bool keep_disconnected_chain )
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2014-10-07 01:46:25 +02:00
2020-08-31 09:45:33 +02:00
m_cache . m_timestamps_and_difficulties_height = 0 ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
// if empty alt chain passed (not sure how that could happen), return false
CHECK_AND_ASSERT_MES ( alt_chain . size ( ) , false , " switch_to_alternative_blockchain: empty chain passed " ) ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
// verify that main chain has front of alt chain's parent block
2019-05-08 13:11:23 +02:00
if ( ! m_db - > block_exists ( alt_chain . front ( ) . bl . prev_id ) )
2015-12-14 06:40:16 +01:00
{
LOG_ERROR ( " Attempting to move to an alternate chain, but it doesn't appear to connect to the main chain! " ) ;
return false ;
}
// pop blocks from the blockchain until the top block is the parent
// of the front block of the alt chain.
2019-09-10 09:52:52 +02:00
std : : list < block_and_checkpoint > disconnected_chain ; // TODO(loki): use a vector and rbegin(), rend() because we don't have push_front
2019-05-08 13:11:23 +02:00
while ( m_db - > top_block_hash ( ) ! = alt_chain . front ( ) . bl . prev_id )
2015-12-14 06:40:16 +01:00
{
2019-09-10 09:52:52 +02:00
block_and_checkpoint entry = { } ;
entry . block = pop_block_from_blockchain ( ) ;
entry . checkpointed = m_db - > get_block_checkpoint ( cryptonote : : get_block_height ( entry . block ) , entry . checkpoint ) ;
disconnected_chain . push_front ( entry ) ;
2015-12-14 06:40:16 +01:00
}
auto split_height = m_db - > height ( ) ;
2018-06-29 06:47:00 +02:00
for ( BlockchainDetachedHook * hook : m_blockchain_detached_hooks )
2019-10-16 01:25:04 +02:00
hook - > blockchain_detached ( split_height , false /*by_pop_blocks*/ ) ;
2020-01-30 00:03:24 +01:00
load_missing_blocks_into_loki_subsystems ( ) ;
2018-06-29 06:47:00 +02:00
2015-12-14 06:40:16 +01:00
//connecting new alternative chain
for ( auto alt_ch_iter = alt_chain . begin ( ) ; alt_ch_iter ! = alt_chain . end ( ) ; alt_ch_iter + + )
{
2019-05-08 13:11:23 +02:00
const auto & bei = * alt_ch_iter ;
2019-10-31 23:26:58 +01:00
block_verification_context bvc { } ;
2014-10-13 06:31:21 +02:00
2015-12-14 06:40:16 +01:00
// add block to main chain
2020-05-28 07:36:46 +02:00
bool r = handle_block_to_main_chain ( bei . bl , cryptonote : : get_block_hash ( bei . bl ) , bvc , bei . checkpointed ? & bei . checkpoint : nullptr , false ) ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
// if adding block to main chain failed, rollback to previous state and
// return false
if ( ! r | | ! bvc . m_added_to_main_chain )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR ( " Failed to switch to alternative blockchain " ) ;
2015-12-14 06:40:16 +01:00
// rollback_blockchain_switching should be moved to two different
// functions: rollback and apply_chain, but for now we pretend it is
// just the latter (because the rollback was done above).
2015-12-25 23:02:07 +01:00
rollback_blockchain_switching ( disconnected_chain , split_height ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2019-05-08 13:11:23 +02:00
const crypto : : hash blkid = cryptonote : : get_block_hash ( bei . bl ) ;
2019-09-23 03:09:19 +02:00
add_block_as_invalid ( bei . bl ) ;
2019-05-08 13:11:23 +02:00
MERROR ( " The block was inserted as invalid while connecting new alternative chain, block_id: " < < blkid ) ;
m_db - > remove_alt_block ( blkid ) ;
alt_ch_iter + + ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2016-12-08 23:26:27 +01:00
for ( auto alt_ch_to_orph_iter = alt_ch_iter ; alt_ch_to_orph_iter ! = alt_chain . end ( ) ; )
2015-12-14 06:40:16 +01:00
{
2019-05-08 13:11:23 +02:00
const auto & bei = * alt_ch_to_orph_iter + + ;
2019-09-23 03:09:19 +02:00
add_block_as_invalid ( bei . bl ) ;
2019-05-08 13:11:23 +02:00
m_db - > remove_alt_block ( blkid ) ;
2015-12-14 06:40:16 +01:00
}
return false ;
2014-10-07 01:46:25 +02:00
}
2015-12-14 06:40:16 +01:00
}
2014-10-07 01:46:25 +02:00
2019-08-22 08:28:56 +02:00
if ( keep_disconnected_chain ) //pushing old chain as alternative chain
2015-12-14 06:40:16 +01:00
{
2019-08-22 08:28:56 +02:00
for ( auto & old_ch_ent : disconnected_chain )
2014-10-07 01:46:25 +02:00
{
2019-10-31 23:26:58 +01:00
block_verification_context bvc { } ;
2019-09-10 09:52:52 +02:00
bool r = handle_alternative_block ( old_ch_ent . block , cryptonote : : get_block_hash ( old_ch_ent . block ) , bvc , old_ch_ent . checkpointed ? & old_ch_ent . checkpoint : nullptr ) ;
2019-08-22 08:28:56 +02:00
if ( ! r )
{
MERROR ( " Failed to push ex-main chain blocks to alternative chain " ) ;
// previously this would fail the blockchain switching, but I don't
// think this is bad enough to warrant that.
}
2014-10-07 01:46:25 +02:00
}
2015-12-14 06:40:16 +01:00
}
2014-10-07 01:46:25 +02:00
2016-03-25 07:22:06 +01:00
//removing alt_chain entries from alternative chains container
2019-05-08 13:11:23 +02:00
for ( const auto & bei : alt_chain )
2015-12-14 06:40:16 +01:00
{
2019-05-08 13:11:23 +02:00
m_db - > remove_alt_block ( cryptonote : : get_block_hash ( bei . bl ) ) ;
2015-12-14 06:40:16 +01:00
}
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
m_hardfork - > reorganize_from_chain_height ( split_height ) ;
2019-04-23 21:32:27 +02:00
get_block_longhash_reorg ( split_height ) ;
2015-09-12 12:14:00 +02:00
2019-01-09 15:29:28 +01:00
std : : shared_ptr < tools : : Notify > reorg_notify = m_reorg_notify ;
if ( reorg_notify )
reorg_notify - > notify ( " %s " , std : : to_string ( split_height ) . c_str ( ) , " %h " , std : : to_string ( m_db - > height ( ) ) . c_str ( ) ,
" %n " , std : : to_string ( m_db - > height ( ) - split_height ) . c_str ( ) , NULL ) ;
2020-02-19 16:17:43 +01:00
std : : shared_ptr < tools : : Notify > block_notify = m_block_notify ;
if ( block_notify )
for ( const auto & bei : alt_chain )
block_notify - > notify ( " %s " , epee : : string_tools : : pod_to_hex ( get_block_hash ( bei . bl ) ) . c_str ( ) , NULL ) ;
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MGINFO_GREEN ( " REORGANIZE SUCCESS! on height: " < < split_height < < " , new blockchain size: " < < m_db - > height ( ) ) ;
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
// This function calculates the difficulty target for the block being added to
// an alternate chain.
2019-09-10 09:52:52 +02:00
difficulty_type Blockchain : : get_next_difficulty_for_alternative_chain ( const std : : list < block_extended_info > & alt_chain , uint64_t alt_block_height ) const
2014-10-07 01:46:25 +02:00
{
2018-06-14 21:11:49 +02:00
if ( m_fixed_difficulty )
{
return m_db - > height ( ) ? m_fixed_difficulty : 1 ;
}
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2020-08-31 09:45:33 +02:00
uint64_t block_count = 0 ;
{
bool before_hf16 = false ;
if ( alt_chain . size ( ) )
before_hf16 = alt_chain . back ( ) . bl . major_version < network_version_16 ;
else
{
static const uint64_t hf16_height = HardFork : : get_hardcoded_hard_fork_height ( m_nettype , cryptonote : : network_version_16 ) ;
before_hf16 = get_current_blockchain_height ( ) < hf16_height ;
}
block_count = DIFFICULTY_BLOCKS_COUNT ( before_hf16 ) ;
}
2015-12-14 06:40:16 +01:00
std : : vector < uint64_t > timestamps ;
std : : vector < difficulty_type > cumulative_difficulties ;
// if the alt chain isn't long enough to calculate the difficulty target
// based on its blocks alone, need to get more blocks from the main chain
2020-08-31 09:45:33 +02:00
if ( alt_chain . size ( ) < block_count )
2015-12-14 06:40:16 +01:00
{
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
// Figure out start and stop offsets for main chain blocks
2019-09-10 09:52:52 +02:00
size_t main_chain_stop_offset = alt_chain . size ( ) ? alt_chain . front ( ) . height : alt_block_height ;
2020-08-31 09:45:33 +02:00
size_t main_chain_count = block_count - std : : min ( static_cast < size_t > ( block_count ) , alt_chain . size ( ) ) ;
2015-12-14 06:40:16 +01:00
main_chain_count = std : : min ( main_chain_count , main_chain_stop_offset ) ;
size_t main_chain_start_offset = main_chain_stop_offset - main_chain_count ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
if ( ! main_chain_start_offset )
+ + main_chain_start_offset ; //skip genesis block
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
// get difficulties and timestamps from relevant main chain blocks
for ( ; main_chain_start_offset < main_chain_stop_offset ; + + main_chain_start_offset )
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
timestamps . push_back ( m_db - > get_block_timestamp ( main_chain_start_offset ) ) ;
cumulative_difficulties . push_back ( m_db - > get_block_cumulative_difficulty ( main_chain_start_offset ) ) ;
2014-10-07 01:46:25 +02:00
}
2015-12-14 06:40:16 +01:00
// make sure we haven't accidentally grabbed too many blocks...maybe don't need this check?
2020-08-31 09:45:33 +02:00
CHECK_AND_ASSERT_MES ( ( alt_chain . size ( ) + timestamps . size ( ) ) < = block_count , false , " Internal error, alt_chain.size()[ " < < alt_chain . size ( ) < < " ] + vtimestampsec.size()[ " < < timestamps . size ( ) < < " ] NOT <= DIFFICULTY_WINDOW[] " < < block_count ) ;
2015-11-13 09:24:47 +01:00
2019-05-08 13:11:23 +02:00
for ( const auto & bei : alt_chain )
2015-12-14 06:40:16 +01:00
{
2019-05-08 13:11:23 +02:00
timestamps . push_back ( bei . bl . timestamp ) ;
cumulative_difficulties . push_back ( bei . cumulative_difficulty ) ;
2015-12-14 06:40:16 +01:00
}
}
// if the alt chain is long enough for the difficulty calc, grab difficulties
// and timestamps from it alone
else
{
2020-08-31 09:45:33 +02:00
timestamps . resize ( static_cast < size_t > ( block_count ) ) ;
cumulative_difficulties . resize ( static_cast < size_t > ( block_count ) ) ;
2015-12-14 06:40:16 +01:00
size_t count = 0 ;
size_t max_i = timestamps . size ( ) - 1 ;
// get difficulties and timestamps from most recent blocks in alt chain
2020-06-02 06:42:27 +02:00
for ( auto it = alt_chain . rbegin ( ) ; it ! = alt_chain . rend ( ) ; + + it )
2015-12-14 06:40:16 +01:00
{
2020-06-02 06:42:27 +02:00
const auto & bei = * it ;
2019-05-08 13:11:23 +02:00
timestamps [ max_i - count ] = bei . bl . timestamp ;
cumulative_difficulties [ max_i - count ] = bei . cumulative_difficulty ;
2015-12-14 06:40:16 +01:00
count + + ;
2020-08-31 09:45:33 +02:00
if ( count > = block_count )
2015-12-14 06:40:16 +01:00
break ;
}
}
// calculate the difficulty target for the block and return it
2020-08-31 09:45:33 +02:00
uint64_t height = ( alt_chain . size ( ) ? alt_chain . front ( ) . height : alt_block_height ) + alt_chain . size ( ) + 1 ;
2020-08-27 09:43:08 +02:00
return next_difficulty_v2 ( timestamps ,
cumulative_difficulties ,
tools : : to_seconds ( TARGET_BLOCK_TIME ) ,
2020-08-31 09:45:33 +02:00
difficulty_mode ( m_nettype , get_current_hard_fork_version ( ) , height ) ) ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
// This function does a sanity check on basic things that all miner
// transactions have in common, such as:
// one input, of type txin_gen, with height set to the block's height
// correct miner tx unlock time
// a non-overflowing tx amount (dubious necessity on this check)
2020-05-21 06:54:01 +02:00
bool Blockchain : : prevalidate_miner_transaction ( const block & b , uint64_t height , uint8_t hf_version )
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
CHECK_AND_ASSERT_MES ( b . miner_tx . vin . size ( ) = = 1 , false , " coinbase transaction in the block has no inputs " ) ;
2020-06-02 05:47:20 +02:00
CHECK_AND_ASSERT_MES ( std : : holds_alternative < txin_gen > ( b . miner_tx . vin [ 0 ] ) , false , " coinbase transaction in the block has the wrong type " ) ;
if ( std : : get < txin_gen > ( b . miner_tx . vin [ 0 ] ) . height ! = height )
2015-12-14 06:40:16 +01:00
{
2020-06-02 05:47:20 +02:00
MWARNING ( " The miner transaction in block has invalid height: " < < std : : get < txin_gen > ( b . miner_tx . vin [ 0 ] ) . height < < " , expected: " < < height ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MDEBUG ( " Miner tx hash: " < < get_transaction_hash ( b . miner_tx ) ) ;
2015-12-14 06:40:16 +01:00
CHECK_AND_ASSERT_MES ( b . miner_tx . unlock_time = = height + CRYPTONOTE_MINED_MONEY_UNLOCK_WINDOW , false , " coinbase transaction transaction has the wrong unlock time= " < < b . miner_tx . unlock_time < < " , expected " < < height + CRYPTONOTE_MINED_MONEY_UNLOCK_WINDOW ) ;
2020-05-21 06:54:01 +02:00
if ( hf_version > = cryptonote : : network_version_12_checkpointing )
{
if ( b . miner_tx . type ! = txtype : : standard )
{
MERROR ( " Coinbase invalid transaction type for coinbase transaction. " ) ;
return false ;
}
txversion min_version = transaction : : get_max_version_for_hf ( hf_version ) ;
txversion max_version = transaction : : get_min_version_for_hf ( hf_version ) ;
if ( b . miner_tx . version < min_version | | b . miner_tx . version > max_version )
{
MERROR_VER ( " Coinbase invalid version: " < < b . miner_tx . version < < " for hardfork: " < < hf_version < < " min/max version: " < < min_version < < " / " < < max_version ) ;
return false ;
}
}
if ( hf_version > = HF_VERSION_REJECT_SIGS_IN_COINBASE ) // Enforce empty rct signatures for miner transactions,
CHECK_AND_ASSERT_MES ( b . miner_tx . rct_signatures . type = = rct : : RCTTypeNull , false , " RingCT signatures not allowed in coinbase transactions " ) ;
2015-12-14 06:40:16 +01:00
//check outs overflow
//NOTE: not entirely sure this is necessary, given that this function is
// designed simply to make sure the total amount for a transaction
// does not overflow a uint64_t, and this transaction *is* a uint64_t...
if ( ! check_outs_overflow ( b . miner_tx ) )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR ( " miner transaction has money overflow in block " < < get_block_hash ( b ) ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
// This function validates the miner transaction reward
2019-10-04 05:57:14 +02:00
bool Blockchain : : validate_miner_transaction ( const block & b , size_t cumulative_block_weight , uint64_t fee , uint64_t & base_reward , uint64_t already_generated_coins , uint8_t version )
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
//validate reward
uint64_t money_in_use = 0 ;
2015-10-08 04:28:11 +02:00
for ( auto & o : b . miner_tx . vout )
2014-10-07 01:46:25 +02:00
money_in_use + = o . amount ;
2018-08-29 02:55:56 +02:00
if ( b . miner_tx . vout . size ( ) = = 0 ) {
MERROR_VER ( " miner tx has no outputs " ) ;
return false ;
}
2019-10-09 22:01:48 +02:00
uint64_t median_weight ;
if ( version > = HF_VERSION_EFFECTIVE_SHORT_TERM_MEDIAN_IN_PENALTY )
{
median_weight = m_current_block_cumul_weight_median ;
}
else
{
std : : vector < uint64_t > last_blocks_weights ;
get_last_n_blocks_weights ( last_blocks_weights , CRYPTONOTE_REWARD_BLOCKS_WINDOW ) ;
median_weight = epee : : misc_utils : : median ( last_blocks_weights ) ;
}
2018-11-12 04:02:21 +01:00
2020-05-25 03:27:25 +02:00
uint64_t height = cryptonote : : get_block_height ( b ) ;
2018-11-12 04:02:21 +01:00
loki_block_reward_context block_reward_context = { } ;
block_reward_context . fee = fee ;
block_reward_context . height = height ;
if ( ! calc_batched_governance_reward ( height , block_reward_context . batched_governance ) )
{
MERROR_VER ( " Failed to calculate batched governance reward " ) ;
return false ;
}
block_reward_parts reward_parts ;
2020-05-25 03:27:25 +02:00
if ( ! get_loki_block_reward ( median_weight , cumulative_block_weight , already_generated_coins , version , reward_parts , block_reward_context ) )
2015-12-14 06:40:16 +01:00
{
2018-07-18 23:24:53 +02:00
MERROR_VER ( " block weight " < < cumulative_block_weight < < " is bigger than allowed for this blockchain " ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
2018-03-12 00:24:08 +01:00
2018-06-29 06:47:00 +02:00
for ( ValidateMinerTxHook * hook : m_validate_miner_tx_hooks )
2018-11-12 04:02:21 +01:00
{
2020-07-03 10:21:26 +02:00
if ( ! hook - > validate_miner_tx ( b , reward_parts ) )
2018-06-29 06:47:00 +02:00
return false ;
2018-11-12 04:02:21 +01:00
}
2018-06-29 06:47:00 +02:00
2018-11-12 04:02:21 +01:00
if ( already_generated_coins ! = 0 & & block_has_governance_output ( nettype ( ) , b ) )
2018-03-12 00:24:08 +01:00
{
2019-09-19 06:20:16 +02:00
if ( version > = network_version_10_bulletproofs & & reward_parts . governance_paid = = 0 )
2018-03-12 00:24:08 +01:00
{
2018-11-12 04:02:21 +01:00
MERROR ( " Governance reward should not be 0 after hardfork v10 if this height has a governance output because it is the batched payout height " ) ;
2018-03-12 00:24:08 +01:00
return false ;
}
2019-09-19 06:20:16 +02:00
if ( b . miner_tx . vout . back ( ) . amount ! = reward_parts . governance_paid )
2018-04-09 01:32:12 +02:00
{
2019-09-19 06:20:16 +02:00
MERROR ( " Governance reward amount incorrect. Should be: " < < print_money ( reward_parts . governance_paid ) < < " , is: " < < print_money ( b . miner_tx . vout . back ( ) . amount ) ) ;
2018-11-12 04:02:21 +01:00
return false ;
2018-04-09 01:32:12 +02:00
}
2020-06-02 05:47:20 +02:00
if ( ! validate_governance_reward_key (
m_db - > height ( ) ,
2020-07-21 22:40:17 +02:00
cryptonote : : get_config ( m_nettype ) . governance_wallet_address ( version ) ,
2020-06-02 05:47:20 +02:00
b . miner_tx . vout . size ( ) - 1 ,
std : : get < txout_to_key > ( b . miner_tx . vout . back ( ) . target ) . key ,
m_nettype ) )
2018-03-12 00:24:08 +01:00
{
MERROR ( " Governance reward public key incorrect. " ) ;
return false ;
}
}
2019-06-04 01:50:19 +02:00
2019-10-04 05:57:14 +02:00
// +1 here to allow a 1 atomic unit error in the calculation (which can happen because of floating point errors or rounding)
// TODO(loki): eliminate all floating point math in reward calculations.
uint64_t max_base_reward = reward_parts . base_miner + reward_parts . governance_paid + reward_parts . service_node_paid + 1 ;
uint64_t max_money_in_use = max_base_reward + fee ;
if ( money_in_use > max_money_in_use )
2015-12-14 06:40:16 +01:00
{
2019-10-04 05:57:14 +02:00
MERROR_VER ( " coinbase transaction spends too much money ( " < < print_money ( money_in_use ) < < " ). Maximum block reward is "
< < print_money ( max_money_in_use ) < < " (= " < < print_money ( max_base_reward ) < < " base + " < < print_money ( fee ) < < " fees) " ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
2018-11-12 04:02:21 +01:00
2019-10-04 05:57:14 +02:00
CHECK_AND_ASSERT_MES ( money_in_use > = fee , false , " base reward calculation bug " ) ;
2018-11-12 04:02:21 +01:00
base_reward = money_in_use - fee ;
2015-12-14 06:40:16 +01:00
return true ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
//------------------------------------------------------------------
2018-07-18 23:24:53 +02:00
// get the block weights of the last <count> blocks, and return by reference <sz>.
2019-02-25 08:33:06 +01:00
void Blockchain : : get_last_n_blocks_weights ( std : : vector < uint64_t > & weights , size_t count ) const
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2015-12-14 06:40:16 +01:00
auto h = m_db - > height ( ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
// this function is meaningless for an empty blockchain...granted it should never be empty
if ( h = = 0 )
return ;
2014-10-07 01:46:25 +02:00
2018-07-18 23:24:53 +02:00
// add weight of last <count> blocks to vector <weights> (or less, if blockchain size < count)
2015-12-14 06:40:16 +01:00
size_t start_offset = h - std : : min < size_t > ( h , count ) ;
2019-02-21 01:13:21 +01:00
weights = m_db - > get_block_weights ( start_offset , count ) ;
}
//------------------------------------------------------------------
2019-04-15 02:33:17 +02:00
uint64_t Blockchain : : get_long_term_block_weight_median ( uint64_t start_height , size_t count ) const
2019-02-21 01:13:21 +01:00
{
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2019-02-21 01:13:21 +01:00
2019-03-26 13:15:08 +01:00
PERF_TIMER ( get_long_term_block_weights ) ;
2019-04-15 02:33:17 +02:00
CHECK_AND_ASSERT_THROW_MES ( count > 0 , " count == 0 " ) ;
2019-03-26 12:51:13 +01:00
bool cached = false ;
uint64_t blockchain_height = m_db - > height ( ) ;
uint64_t tip_height = start_height + count - 1 ;
crypto : : hash tip_hash = crypto : : null_hash ;
2019-04-15 02:33:17 +02:00
if ( tip_height < blockchain_height & & count = = ( size_t ) m_long_term_block_weights_cache_rolling_median . size ( ) )
2019-03-26 12:51:13 +01:00
{
tip_hash = m_db - > get_block_hash_from_height ( tip_height ) ;
cached = tip_hash = = m_long_term_block_weights_cache_tip_hash ;
}
if ( cached )
{
2019-03-26 13:15:08 +01:00
MTRACE ( " requesting " < < count < < " from " < < start_height < < " , cached " ) ;
2019-04-15 02:33:17 +02:00
return m_long_term_block_weights_cache_rolling_median . median ( ) ;
2019-03-26 12:51:13 +01:00
}
2019-03-26 13:15:08 +01:00
// in the vast majority of uncached cases, most is still cached,
// as we just move the window one block up:
2019-04-15 02:33:17 +02:00
if ( tip_height > 0 & & count = = ( size_t ) m_long_term_block_weights_cache_rolling_median . size ( ) & & tip_height < blockchain_height )
2019-03-26 13:15:08 +01:00
{
crypto : : hash old_tip_hash = m_db - > get_block_hash_from_height ( tip_height - 1 ) ;
if ( old_tip_hash = = m_long_term_block_weights_cache_tip_hash )
{
MTRACE ( " requesting " < < count < < " from " < < start_height < < " , incremental " ) ;
m_long_term_block_weights_cache_tip_hash = tip_hash ;
2019-04-15 02:33:17 +02:00
m_long_term_block_weights_cache_rolling_median . insert ( m_db - > get_block_long_term_weight ( tip_height ) ) ;
return m_long_term_block_weights_cache_rolling_median . median ( ) ;
2019-03-26 13:15:08 +01:00
}
}
MTRACE ( " requesting " < < count < < " from " < < start_height < < " , uncached " ) ;
2019-04-15 02:33:17 +02:00
std : : vector < uint64_t > weights = m_db - > get_long_term_block_weights ( start_height , count ) ;
2019-03-26 12:51:13 +01:00
m_long_term_block_weights_cache_tip_hash = tip_hash ;
2019-04-15 02:33:17 +02:00
m_long_term_block_weights_cache_rolling_median . clear ( ) ;
for ( uint64_t w : weights )
m_long_term_block_weights_cache_rolling_median . insert ( w ) ;
return m_long_term_block_weights_cache_rolling_median . median ( ) ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2018-07-18 23:24:53 +02:00
uint64_t Blockchain : : get_current_cumulative_block_weight_limit ( ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2018-07-18 23:24:53 +02:00
return m_current_block_cumul_weight_limit ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2018-07-18 23:24:53 +02:00
uint64_t Blockchain : : get_current_cumulative_block_weight_median ( ) const
2018-01-17 11:47:05 +01:00
{
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2018-07-18 23:24:53 +02:00
return m_current_block_cumul_weight_median ;
2018-01-17 11:47:05 +01:00
}
//------------------------------------------------------------------
2014-10-07 01:46:25 +02:00
//TODO: This function only needed minor modification to work with BlockchainDB,
// and *works*. As such, to reduce the number of things that might break
// in moving to BlockchainDB, this function will remain otherwise
// unchanged for the time being.
//
// This function makes a new block for a miner to mine the hash for
2020-07-16 06:08:29 +02:00
bool Blockchain : : create_block_template_internal ( block & b , const crypto : : hash * from_block , const block_template_info & info , difficulty_type & diffic , uint64_t & height , uint64_t & expected_reward , const blobdata & ex_nonce )
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2018-07-18 23:24:53 +02:00
size_t median_weight ;
2015-12-14 06:40:16 +01:00
uint64_t already_generated_coins ;
2016-04-17 12:04:01 +02:00
uint64_t pool_cookie ;
2014-10-07 01:46:25 +02:00
2019-12-24 18:36:52 +01:00
auto lock = tools : : unique_locks ( m_tx_pool , * this ) ;
2020-08-27 06:52:31 +02:00
if ( m_btc_valid & & ! from_block )
2020-07-16 06:08:29 +02:00
{
2016-04-17 12:04:01 +02:00
// The pool cookie is atomic. The lack of locking is OK, as if it changes
// just as we compare it, we'll just use a slightly old template, but
// this would be the case anyway if we'd lock, and the change happened
// just after the block template was created
2020-08-06 09:21:00 +02:00
if ( info . miner_address ! = m_btc_address & & m_btc_nonce = = ex_nonce
2019-05-19 04:02:33 +02:00
& & m_btc_pool_cookie = = m_tx_pool . cookie ( ) & & m_btc . prev_id = = get_tail_id ( ) ) {
2016-04-17 12:04:01 +02:00
MDEBUG ( " Using cached template " ) ;
2019-09-10 15:36:09 +02:00
const uint64_t now = time ( NULL ) ;
if ( m_btc . timestamp < now ) // ensures it can't get below the median of the last few blocks
m_btc . timestamp = now ;
2016-04-17 12:04:01 +02:00
b = m_btc ;
diffic = m_btc_difficulty ;
2019-03-30 21:25:40 +01:00
height = m_btc_height ;
2016-04-17 12:04:01 +02:00
expected_reward = m_btc_expected_reward ;
return true ;
}
2020-08-06 09:21:00 +02:00
MDEBUG ( " Not using cached template: address " < < ( bool ) ( info . miner_address ! = m_btc_address ) < < " , nonce " < < ( m_btc_nonce = = ex_nonce ) < < " , cookie " < < ( m_btc_pool_cookie = = m_tx_pool . cookie ( ) ) < < " , from_block " < < ( ! ! from_block ) ) ;
2016-04-17 12:04:01 +02:00
invalidate_block_template_cache ( ) ;
}
2015-09-12 12:14:00 +02:00
2019-03-23 17:20:08 +01:00
if ( from_block )
{
//build alternative subchain, front -> mainchain, back -> alternative head
//block is not related with head of main chain
//first of all - look in alternative chains container
2019-05-08 13:11:23 +02:00
alt_block_data_t prev_data ;
2019-09-10 09:52:52 +02:00
bool parent_in_alt = m_db - > get_alt_block ( * from_block , & prev_data , NULL , nullptr /*checkpoint*/ ) ;
2019-03-23 17:20:08 +01:00
bool parent_in_main = m_db - > block_exists ( * from_block ) ;
2019-05-08 13:11:23 +02:00
if ( ! parent_in_alt & & ! parent_in_main )
2019-03-23 17:20:08 +01:00
{
MERROR ( " Unknown from block " ) ;
return false ;
}
//we have new block in alternative chain
2019-05-08 13:11:23 +02:00
std : : list < block_extended_info > alt_chain ;
2019-10-31 23:26:58 +01:00
block_verification_context bvc { } ;
2019-03-23 17:20:08 +01:00
std : : vector < uint64_t > timestamps ;
2019-10-28 04:03:13 +01:00
if ( ! build_alt_chain ( * from_block , alt_chain , timestamps , bvc , nullptr /*num_alt_checkpoints*/ , nullptr /*num_checkpoints*/ ) )
2019-03-23 17:20:08 +01:00
return false ;
if ( parent_in_main )
{
cryptonote : : block prev_block ;
CHECK_AND_ASSERT_MES ( get_block_by_hash ( * from_block , prev_block ) , false , " From block not found " ) ; // TODO
uint64_t from_block_height = cryptonote : : get_block_height ( prev_block ) ;
height = from_block_height + 1 ;
}
else
{
2019-05-08 13:11:23 +02:00
height = alt_chain . back ( ) . height + 1 ;
2019-03-23 17:20:08 +01:00
}
b . major_version = m_hardfork - > get_ideal_version ( height ) ;
b . minor_version = m_hardfork - > get_ideal_version ( ) ;
b . prev_id = * from_block ;
// cheat and use the weight of the block we start from, virtually certain to be acceptable
// and use 1.9 times rather than 2 times so we're even more sure
if ( parent_in_main )
{
median_weight = m_db - > get_block_weight ( height - 1 ) ;
already_generated_coins = m_db - > get_block_already_generated_coins ( height - 1 ) ;
}
else
{
2019-05-08 13:11:23 +02:00
median_weight = prev_data . cumulative_weight - prev_data . cumulative_weight / 20 ;
already_generated_coins = alt_chain . back ( ) . already_generated_coins ;
2019-03-23 17:20:08 +01:00
}
// FIXME: consider moving away from block_extended_info at some point
2019-10-31 23:26:58 +01:00
block_extended_info bei { } ;
2019-03-23 17:20:08 +01:00
bei . bl = b ;
2019-05-08 13:11:23 +02:00
bei . height = alt_chain . size ( ) ? prev_data . height + 1 : m_db - > get_block_height ( * from_block ) + 1 ;
2019-03-23 17:20:08 +01:00
2019-09-10 09:52:52 +02:00
diffic = get_next_difficulty_for_alternative_chain ( alt_chain , bei . height ) ;
2019-03-23 17:20:08 +01:00
}
else
{
2020-08-31 09:45:33 +02:00
height = m_db - > height ( ) ;
b . major_version = m_hardfork - > get_current_version ( ) ;
b . minor_version = m_hardfork - > get_ideal_version ( ) ;
b . prev_id = get_tail_id ( ) ;
median_weight = m_current_block_cumul_weight_limit / 2 ;
diffic = get_difficulty_for_next_block ( ) ;
2019-03-23 17:20:08 +01:00
already_generated_coins = m_db - > get_block_already_generated_coins ( height - 1 ) ;
}
2015-12-14 06:40:16 +01:00
b . timestamp = time ( NULL ) ;
2014-10-07 01:46:25 +02:00
2018-04-30 04:20:27 +02:00
uint64_t median_ts ;
if ( ! check_block_timestamp ( b , median_ts ) )
{
b . timestamp = median_ts ;
2018-04-15 19:01:18 +02:00
}
2015-12-14 06:42:19 +01:00
CHECK_AND_ASSERT_MES ( diffic , false , " difficulty overhead. " ) ;
2014-10-07 01:46:25 +02:00
2018-07-18 23:24:53 +02:00
size_t txs_weight ;
2015-12-14 06:40:16 +01:00
uint64_t fee ;
2019-04-12 11:04:00 +02:00
if ( ! m_tx_pool . fill_block_template ( b , median_weight , already_generated_coins , txs_weight , fee , expected_reward , b . major_version , height ) )
2015-12-14 06:40:16 +01:00
{
return false ;
}
2016-04-17 12:04:01 +02:00
pool_cookie = m_tx_pool . cookie ( ) ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
/*
2018-07-18 23:24:53 +02:00
two - phase miner transaction generation : we don ' t know exact block weight until we prepare block , but we don ' t know reward until we know
block weight , so first miner transaction generated with fake amount of money , and with phase we know think we know expected block weight
2015-12-14 06:40:16 +01:00
*/
2018-07-18 23:24:53 +02:00
//make blocks coin-base tx looks close to real coinbase tx to get truthful blob weight
2020-07-03 09:29:52 +02:00
uint8_t hf_version = b . major_version ;
2020-07-16 06:08:29 +02:00
auto miner_tx_context =
info . is_miner
? loki_miner_tx_context : : miner_block ( m_nettype , info . miner_address , m_service_node_list . get_block_leader ( ) )
: loki_miner_tx_context : : pulse_block ( m_nettype , info . service_node_payout , m_service_node_list . get_block_leader ( ) ) ;
2018-11-12 04:02:21 +01:00
if ( ! calc_batched_governance_reward ( height , miner_tx_context . batched_governance ) )
{
LOG_ERROR ( " Failed to calculate batched governance reward " ) ;
return false ;
}
2020-06-25 09:46:31 +02:00
bool r = construct_miner_tx ( height , median_weight , already_generated_coins , txs_weight , fee , b . miner_tx , miner_tx_context , ex_nonce , hf_version ) ;
2018-06-29 06:47:00 +02:00
2016-12-04 14:13:54 +01:00
CHECK_AND_ASSERT_MES ( r , false , " Failed to construct miner tx, first chance " ) ;
2018-07-18 23:24:53 +02:00
size_t cumulative_weight = txs_weight + get_transaction_weight ( b . miner_tx ) ;
2015-12-14 06:40:16 +01:00
for ( size_t try_count = 0 ; try_count ! = 10 ; + + try_count )
{
2020-06-25 09:46:31 +02:00
r = construct_miner_tx ( height , median_weight , already_generated_coins , cumulative_weight , fee , b . miner_tx , miner_tx_context , ex_nonce , hf_version ) ;
2014-10-07 01:46:25 +02:00
2016-12-04 14:13:54 +01:00
CHECK_AND_ASSERT_MES ( r , false , " Failed to construct miner tx, second chance " ) ;
2018-07-18 23:24:53 +02:00
size_t coinbase_weight = get_transaction_weight ( b . miner_tx ) ;
if ( coinbase_weight > cumulative_weight - txs_weight )
2015-12-14 06:40:16 +01:00
{
2018-07-18 23:24:53 +02:00
cumulative_weight = txs_weight + coinbase_weight ;
2015-12-14 06:40:16 +01:00
continue ;
}
2014-10-07 01:46:25 +02:00
2018-07-18 23:24:53 +02:00
if ( coinbase_weight < cumulative_weight - txs_weight )
2015-12-14 06:40:16 +01:00
{
2018-07-18 23:24:53 +02:00
size_t delta = cumulative_weight - txs_weight - coinbase_weight ;
2015-12-14 06:40:16 +01:00
b . miner_tx . extra . insert ( b . miner_tx . extra . end ( ) , delta , 0 ) ;
//here could be 1 byte difference, because of extra field counter is varint, and it can become from 1-byte len to 2-bytes len.
2018-07-18 23:24:53 +02:00
if ( cumulative_weight ! = txs_weight + get_transaction_weight ( b . miner_tx ) )
2015-12-14 06:40:16 +01:00
{
2018-07-18 23:24:53 +02:00
CHECK_AND_ASSERT_MES ( cumulative_weight + 1 = = txs_weight + get_transaction_weight ( b . miner_tx ) , false , " unexpected case: cumulative_weight= " < < cumulative_weight < < " + 1 is not equal txs_cumulative_weight= " < < txs_weight < < " + get_transaction_weight(b.miner_tx)= " < < get_transaction_weight ( b . miner_tx ) ) ;
2015-12-14 06:40:16 +01:00
b . miner_tx . extra . resize ( b . miner_tx . extra . size ( ) - 1 ) ;
2018-07-18 23:24:53 +02:00
if ( cumulative_weight ! = txs_weight + get_transaction_weight ( b . miner_tx ) )
2015-12-14 06:40:16 +01:00
{
2018-07-18 23:24:53 +02:00
//fuck, not lucky, -1 makes varint-counter size smaller, in that case we continue to grow with cumulative_weight
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MDEBUG ( " Miner tx creation has no luck with delta_extra size = " < < delta < < " and " < < delta - 1 ) ;
2018-07-18 23:24:53 +02:00
cumulative_weight + = delta - 1 ;
2015-12-14 06:40:16 +01:00
continue ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MDEBUG ( " Setting extra for block: " < < b . miner_tx . extra . size ( ) < < " , try_count= " < < try_count ) ;
2015-12-14 06:40:16 +01:00
}
}
2018-07-18 23:24:53 +02:00
CHECK_AND_ASSERT_MES ( cumulative_weight = = txs_weight + get_transaction_weight ( b . miner_tx ) , false , " unexpected case: cumulative_weight= " < < cumulative_weight < < " is not equal txs_cumulative_weight= " < < txs_weight < < " + get_transaction_weight(b.miner_tx)= " < < get_transaction_weight ( b . miner_tx ) ) ;
2016-04-17 12:04:01 +02:00
2019-03-23 17:20:08 +01:00
if ( ! from_block )
2020-07-16 06:08:29 +02:00
cache_block_template ( b , info . miner_address , ex_nonce , diffic , height , expected_reward , pool_cookie ) ;
2015-12-14 06:40:16 +01:00
return true ;
}
LOG_ERROR ( " Failed to create_block_template with " < < 10 < < " tries " ) ;
return false ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2020-07-16 06:08:29 +02:00
bool Blockchain : : create_miner_block_template ( block & b , const crypto : : hash * from_block , const account_public_address & miner_address , difficulty_type & diffic , uint64_t & height , uint64_t & expected_reward , const blobdata & ex_nonce )
{
block_template_info info = { } ;
info . is_miner = true ;
info . miner_address = miner_address ;
return create_block_template_internal ( b , from_block , info , diffic , height , expected_reward , ex_nonce ) ;
}
//------------------------------------------------------------------
bool Blockchain : : create_next_miner_block_template ( block & b , const account_public_address & miner_address , difficulty_type & diffic , uint64_t & height , uint64_t & expected_reward , const blobdata & ex_nonce )
{
2020-08-06 09:21:00 +02:00
return create_miner_block_template ( b , nullptr /*from_block*/ , miner_address , diffic , height , expected_reward , ex_nonce ) ;
2020-07-16 06:08:29 +02:00
}
//------------------------------------------------------------------
2020-08-25 06:56:30 +02:00
bool Blockchain : : create_next_pulse_block_template ( block & b , const service_nodes : : payout & block_producer , uint8_t round , uint16_t validator_bitset , uint64_t & height )
2019-03-23 17:20:08 +01:00
{
2020-08-25 06:56:30 +02:00
uint64_t expected_reward = 0 ;
2020-07-16 06:08:29 +02:00
block_template_info info = { } ;
info . service_node_payout = block_producer ;
uint64_t diffic = 0 ;
blobdata nonce = { } ;
2020-08-25 06:56:30 +02:00
bool result = create_block_template_internal ( b , NULL /*from_block*/ , info , diffic , height , expected_reward , nonce ) ;
b . pulse . round = round ;
b . pulse . validator_bitset = validator_bitset ;
return result ;
2019-03-23 17:20:08 +01:00
}
//------------------------------------------------------------------
2014-10-07 01:46:25 +02:00
// for an alternate chain, get the timestamps from the main chain to complete
// the needed number of timestamps for the BLOCKCHAIN_TIMESTAMP_CHECK_WINDOW.
2019-03-23 17:20:08 +01:00
bool Blockchain : : complete_timestamps_vector ( uint64_t start_top_height , std : : vector < uint64_t > & timestamps ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
if ( timestamps . size ( ) > = BLOCKCHAIN_TIMESTAMP_CHECK_WINDOW )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
return true ;
2015-12-14 06:40:16 +01:00
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2015-12-14 06:40:16 +01:00
size_t need_elements = BLOCKCHAIN_TIMESTAMP_CHECK_WINDOW - timestamps . size ( ) ;
CHECK_AND_ASSERT_MES ( start_top_height < m_db - > height ( ) , false , " internal error: passed start_height not < " < < " m_db->height() -- " < < start_top_height < < " >= " < < m_db - > height ( ) ) ;
size_t stop_offset = start_top_height > need_elements ? start_top_height - need_elements : 0 ;
2018-04-16 01:16:02 +02:00
timestamps . reserve ( timestamps . size ( ) + start_top_height - stop_offset ) ;
2015-12-14 06:40:16 +01:00
while ( start_top_height ! = stop_offset )
{
timestamps . push_back ( m_db - > get_block_timestamp ( start_top_height ) ) ;
- - start_top_height ;
}
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2019-10-28 04:03:13 +01:00
bool Blockchain : : build_alt_chain ( const crypto : : hash & prev_id ,
std : : list < block_extended_info > & alt_chain ,
std : : vector < uint64_t > & timestamps ,
block_verification_context & bvc ,
int * num_alt_checkpoints ,
2019-12-04 07:07:00 +01:00
int * num_checkpoints )
2019-03-23 17:20:08 +01:00
{
//build alternative subchain, front -> mainchain, back -> alternative head
2019-05-08 13:11:23 +02:00
cryptonote : : alt_block_data_t data ;
cryptonote : : blobdata blob ;
2019-03-23 17:20:08 +01:00
timestamps . clear ( ) ;
2019-08-22 08:28:56 +02:00
2019-10-28 04:03:13 +01:00
int alt_checkpoint_count = 0 ;
int checkpoint_count = 0 ;
2019-08-22 08:28:56 +02:00
crypto : : hash prev_hash = crypto : : null_hash ;
block_extended_info bei = { } ;
2019-09-10 09:52:52 +02:00
blobdata checkpoint_blob ;
for ( bool found = m_db - > get_alt_block ( prev_id , & data , & blob , & checkpoint_blob ) ;
2019-08-22 08:28:56 +02:00
found ;
2019-09-10 09:52:52 +02:00
found = m_db - > get_alt_block ( prev_hash , & data , & blob , & checkpoint_blob ) )
2019-03-23 17:20:08 +01:00
{
2019-05-08 13:11:23 +02:00
CHECK_AND_ASSERT_MES ( cryptonote : : parse_and_validate_block_from_blob ( blob , bei . bl ) , false , " Failed to parse alt block " ) ;
2019-10-28 04:03:13 +01:00
if ( data . checkpointed ) // Take checkpoint from blob stored alongside alt block
2019-09-11 07:46:57 +02:00
{
CHECK_AND_ASSERT_MES ( t_serializable_object_from_blob ( bei . checkpoint , checkpoint_blob ) , false , " Failed to parse alt checkpoint from blob " ) ;
2019-10-28 04:03:13 +01:00
alt_checkpoint_count + + ;
2019-09-11 07:46:57 +02:00
}
2019-10-28 04:03:13 +01:00
// NOTE: If we receive or pre-define a checkpoint for a historical block
// that conflicts with current blocks on the blockchain, upon receipt of
// a new alt block, along this alt chain we should also double check all
// blocks that are checkpointed along this chain in m_checkpoints
// This is particularly relevant for receiving checkpoints via P2P votes
// Which can form checkpoints retrospectively, that may conflict with
// your canonical chain.
bool height_is_checkpointed = false ;
bool alt_block_matches_checkpoint = m_checkpoints . check_block ( data . height , get_block_hash ( bei . bl ) , & height_is_checkpointed , nullptr ) ;
if ( height_is_checkpointed )
2019-09-11 07:46:57 +02:00
{
2019-10-28 04:03:13 +01:00
if ( alt_block_matches_checkpoint )
2019-09-11 07:46:57 +02:00
{
2019-10-28 04:03:13 +01:00
if ( ! data . checkpointed )
{
data . checkpointed = true ;
CHECK_AND_ASSERT_MES ( get_checkpoint ( data . height , bei . checkpoint ) , false , " Unexpected failure to retrieve checkpoint after checking it existed " ) ;
alt_checkpoint_count + + ;
}
2019-09-11 07:46:57 +02:00
}
2019-10-28 04:03:13 +01:00
else
checkpoint_count + + ; // One of our stored-checkpoints references another block that's not this alt block.
2019-09-11 07:46:57 +02:00
}
2019-08-22 08:28:56 +02:00
bei . height = data . height ;
2019-05-08 13:11:23 +02:00
bei . block_cumulative_weight = data . cumulative_weight ;
2019-08-22 08:28:56 +02:00
bei . cumulative_difficulty = data . cumulative_difficulty ;
2019-05-08 13:11:23 +02:00
bei . already_generated_coins = data . already_generated_coins ;
2019-09-10 09:52:52 +02:00
bei . checkpointed = data . checkpointed ;
2019-08-22 08:28:56 +02:00
prev_hash = bei . bl . prev_id ;
2019-05-08 13:11:23 +02:00
timestamps . push_back ( bei . bl . timestamp ) ;
alt_chain . push_front ( std : : move ( bei ) ) ;
2019-08-22 08:28:56 +02:00
bei = { } ;
2019-03-23 17:20:08 +01:00
}
2019-10-28 04:03:13 +01:00
if ( num_alt_checkpoints ) * num_alt_checkpoints = alt_checkpoint_count ;
2019-09-11 07:46:57 +02:00
if ( num_checkpoints ) * num_checkpoints = checkpoint_count ;
2019-03-23 17:20:08 +01:00
// if block to be added connects to known blocks that aren't part of the
// main chain -- that is, if we're adding on to an alternate chain
if ( ! alt_chain . empty ( ) )
{
2019-10-15 08:36:23 +02:00
bool failed = false ;
2019-12-04 07:07:00 +01:00
uint64_t blockchain_height = m_db - > height ( ) ;
2019-03-23 17:20:08 +01:00
// make sure alt chain doesn't somehow start past the end of the main chain
2019-12-04 07:07:00 +01:00
if ( blockchain_height < alt_chain . front ( ) . height )
2019-10-15 08:36:23 +02:00
{
LOG_PRINT_L1 ( " main blockchain wrong height: " < < m_db - > height ( ) < < " , alt_chain: " < < alt_chain . front ( ) . height ) ;
failed = true ;
}
2019-03-23 17:20:08 +01:00
// make sure that the blockchain contains the block that should connect
// this alternate chain with it.
2019-10-15 08:36:23 +02:00
if ( ! failed & & ! m_db - > block_exists ( alt_chain . front ( ) . bl . prev_id ) )
2019-03-23 17:20:08 +01:00
{
2019-10-15 08:36:23 +02:00
LOG_PRINT_L1 ( " alternate chain does not appear to connect to main chain...: " < < alt_chain . front ( ) . bl . prev_id ) ;
failed = true ;
2019-03-23 17:20:08 +01:00
}
// make sure block connects correctly to the main chain
2019-05-08 13:11:23 +02:00
auto h = m_db - > get_block_hash_from_height ( alt_chain . front ( ) . height - 1 ) ;
2019-10-15 08:36:23 +02:00
if ( ! failed & & h ! = alt_chain . front ( ) . bl . prev_id )
{
LOG_PRINT_L1 ( " alternative chain has wrong connection to main chain: " < < h < < " , mismatched with: " < < alt_chain . front ( ) . bl . prev_id ) ;
failed = true ;
}
2019-12-04 07:07:00 +01:00
if ( ! failed & & ! m_checkpoints . is_alternative_block_allowed ( blockchain_height , alt_chain . front ( ) . height , nullptr /*service_node_checkpoint*/ ) )
{
LOG_PRINT_L2 ( " alternative chain is too old to consider: " < < h ) ;
failed = true ;
}
2019-10-15 08:36:23 +02:00
if ( failed )
{
// Cleanup alt chain, it's invalid
2019-12-04 07:07:00 +01:00
bvc . m_verifivation_failed = true ;
2019-10-15 08:36:23 +02:00
for ( auto const & bei : alt_chain )
m_db - > remove_alt_block ( cryptonote : : get_block_hash ( bei . bl ) ) ;
return false ;
}
2019-05-08 13:11:23 +02:00
complete_timestamps_vector ( m_db - > get_block_height ( alt_chain . front ( ) . bl . prev_id ) , timestamps ) ;
2019-03-23 17:20:08 +01:00
}
// if block not associated with known alternate chain
else
{
// if block parent is not part of main chain or an alternate chain,
// we ignore it
bool parent_in_main = m_db - > block_exists ( prev_id ) ;
CHECK_AND_ASSERT_MES ( parent_in_main , false , " internal error: broken imperative condition: parent_in_main " ) ;
complete_timestamps_vector ( m_db - > get_block_height ( prev_id ) , timestamps ) ;
}
return true ;
}
//------------------------------------------------------------------
2014-10-07 01:46:25 +02:00
// If a block is to be added and its parent block is not the current
// main chain top block, then we need to see if we know about its parent block.
// If its parent block is part of a known forked chain, then we need to see
// if that chain is long enough to become the main chain and re-org accordingly
// if so. If not, we need to hang on to the block in case it becomes part of
// a long forked chain eventually.
2019-08-28 07:54:02 +02:00
bool Blockchain : : handle_alternative_block ( const block & b , const crypto : : hash & id , block_verification_context & bvc , checkpoint_t const * checkpoint )
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2020-08-20 10:37:18 +02:00
2020-08-25 08:17:56 +02:00
uint64_t const blk_height = get_block_height ( b ) ;
uint64_t const chain_height = get_current_blockchain_height ( ) ;
2020-08-20 10:37:18 +02:00
// NOTE: Check block parent's existence
alt_block_data_t prev_data = { } ;
bool parent_in_alt = m_db - > get_alt_block ( b . prev_id , & prev_data , NULL , nullptr /*checkpoint_blob*/ ) ;
bool parent_in_main = m_db - > block_exists ( b . prev_id ) ;
if ( ! ( parent_in_main | | parent_in_alt ) )
2015-12-14 06:40:16 +01:00
{
2020-08-20 10:37:18 +02:00
bvc . m_marked_as_orphaned = true ;
MERROR_VER ( " Block recognized as orphaned and rejected, id = " < < id < < " , height " < < blk_height
< < " , parent in alt " < < parent_in_alt < < " , parent in main " < < parent_in_main
< < " (parent " < < b . prev_id < < " , current top " < < get_tail_id ( ) < < " , chain height " < < chain_height < < " ) " ) ;
return true ;
2015-12-14 06:40:16 +01:00
}
2019-07-11 08:16:16 +02:00
2020-08-20 10:37:18 +02:00
// NOTE: Basic sanity checks
if ( ! basic_block_checks ( b , true /*alt_block*/ ) )
2015-12-14 06:40:16 +01:00
{
2020-08-20 10:37:18 +02:00
bvc . m_verifivation_failed = true ;
return false ;
2015-12-14 06:40:16 +01:00
}
2020-08-20 10:37:18 +02:00
// NOTE: Reset timestamp/difficulty cache
2020-08-31 09:45:33 +02:00
m_cache . m_timestamps_and_difficulties_height = 0 ;
2020-08-20 10:37:18 +02:00
// NOTE: Build the alternative chain for checking reorg-ability
std : : list < block_extended_info > alt_chain ;
std : : vector < uint64_t > timestamps ;
int num_checkpoints_on_alt_chain = 0 ;
int num_checkpoints_on_chain = 0 ;
if ( ! build_alt_chain ( b . prev_id , alt_chain , timestamps , bvc , & num_checkpoints_on_alt_chain , & num_checkpoints_on_chain ) )
return false ;
2020-08-25 08:17:56 +02:00
// NOTE: verify that the block's timestamp is within the acceptable range
// (not earlier than the median of the last X blocks in the built alt chain)
if ( ! check_block_timestamp ( timestamps , b ) )
{
MERROR_VER ( " Block with id: " < < id < < std : : endl < < " for alternative chain, has invalid timestamp: " < < b . timestamp ) ;
bvc . m_verifivation_failed = true ;
return false ;
}
2020-08-20 10:37:18 +02:00
// NOTE: Check proof of work
difficulty_type const current_diff = get_next_difficulty_for_alternative_chain ( alt_chain , blk_height ) ;
block_pow_verified const blk_pow = verify_block_pow ( b , current_diff , chain_height , true /*alt_block*/ ) ;
if ( ! blk_pow . valid )
2017-01-14 23:41:14 +01:00
{
bvc . m_verifivation_failed = true ;
return false ;
}
2020-08-20 10:37:18 +02:00
// NOTE: Calculate cumulative difficulty
cryptonote : : alt_block_data_t alt_data = { } ;
2015-12-14 06:40:16 +01:00
{
2020-08-20 10:37:18 +02:00
alt_data . cumulative_difficulty = current_diff ;
if ( alt_chain . size ( ) )
alt_data . cumulative_difficulty + = prev_data . cumulative_difficulty ;
else // passed-in block's previous block's cumulative difficulty, found on the main chain
alt_data . cumulative_difficulty + = m_db - > get_block_cumulative_difficulty ( m_db - > get_block_height ( b . prev_id ) ) ;
}
2014-10-07 01:46:25 +02:00
2020-08-20 10:37:18 +02:00
// NOTE: Add alt block to DB storage and alt chain
{
CHECK_AND_ASSERT_MES ( ! m_db - > get_alt_block ( id , NULL , NULL , NULL ) , false , " insertion of new alternative block returned as it already exists " ) ;
2014-10-07 01:46:25 +02:00
2020-08-20 10:37:18 +02:00
cryptonote : : blobdata checkpoint_blob ;
if ( checkpoint )
2015-12-14 06:40:16 +01:00
{
2020-08-20 10:37:18 +02:00
alt_data . checkpointed = true ;
checkpoint_blob = t_serializable_object_to_blob ( * checkpoint ) ;
num_checkpoints_on_alt_chain + + ;
2015-12-14 06:40:16 +01:00
}
2014-10-07 01:46:25 +02:00
2020-08-20 10:37:18 +02:00
alt_data . height = blk_height ;
alt_data . cumulative_weight = cryptonote : : get_transaction_weight ( b . miner_tx ) ;
for ( const crypto : : hash & txid : b . tx_hashes )
2019-09-10 09:52:52 +02:00
{
2020-08-20 10:37:18 +02:00
cryptonote : : txpool_tx_meta_t tx_meta ;
cryptonote : : blobdata blob ;
if ( get_txpool_tx_meta ( txid , tx_meta ) )
2019-09-10 09:52:52 +02:00
{
2020-08-20 10:37:18 +02:00
alt_data . cumulative_weight + = tx_meta . weight ;
2019-09-10 09:52:52 +02:00
}
2020-08-20 10:37:18 +02:00
else if ( m_db - > get_pruned_tx_blob ( txid , blob ) )
2019-09-17 19:03:28 +02:00
{
2020-08-20 10:37:18 +02:00
cryptonote : : transaction tx ;
if ( ! cryptonote : : parse_and_validate_tx_base_from_blob ( blob , tx ) )
2020-05-25 03:03:31 +02:00
{
2020-08-20 10:37:18 +02:00
MERROR_VER ( " Block with id: " < < epee : : string_tools : : pod_to_hex ( id ) < < " (as alternative) refers to unparsable transaction hash " < < txid < < " . " ) ;
bvc . m_verifivation_failed = true ;
return false ;
2019-09-17 19:03:28 +02:00
}
2020-08-20 10:37:18 +02:00
alt_data . cumulative_weight + = cryptonote : : get_pruned_transaction_weight ( tx ) ;
2019-09-17 19:03:28 +02:00
}
2020-08-20 10:37:18 +02:00
else
2019-10-28 04:03:13 +01:00
{
2020-08-20 10:37:18 +02:00
// we can't determine the block weight, set it to 0 and break out of the loop
alt_data . cumulative_weight = 0 ;
break ;
2019-10-28 04:03:13 +01:00
}
2019-09-10 09:52:52 +02:00
}
2020-08-20 10:37:18 +02:00
uint64_t block_reward = get_outs_money_amount ( b . miner_tx ) ;
const uint64_t prev_generated_coins = alt_chain . size ( ) ? prev_data . already_generated_coins : m_db - > get_block_already_generated_coins ( blk_height - 1 ) ;
alt_data . already_generated_coins = ( block_reward < ( MONEY_SUPPLY - prev_generated_coins ) ) ? prev_generated_coins + block_reward : MONEY_SUPPLY ;
m_db - > add_alt_block ( id , alt_data , cryptonote : : block_to_blob ( b ) , checkpoint_blob . empty ( ) ? nullptr : & checkpoint_blob ) ;
// Check current height for pre-existing checkpoint
bool height_is_checkpointed = false ;
bool alt_block_matches_checkpoint = m_checkpoints . check_block ( alt_data . height , id , & height_is_checkpointed , nullptr ) ;
if ( height_is_checkpointed )
{
if ( ! alt_block_matches_checkpoint )
num_checkpoints_on_chain + + ;
}
2019-09-10 09:52:52 +02:00
alt_chain . push_back ( block_extended_info ( alt_data , b , checkpoint ) ) ;
2020-08-20 10:37:18 +02:00
}
2014-10-07 01:46:25 +02:00
2020-08-20 10:37:18 +02:00
// NOTE: Block is within the allowable service node reorg window due to passing is_alternative_block_allowed().
// So we don't need to check that this block matches the checkpoint unless it's a hardcoded checkpoint, in which
// case it must. Otherwise if it fails a Service Node checkpoint that's fine because we're allowed to replace it in
// this window
if ( bool service_node_checkpoint = false ;
! checkpoint & & ! m_checkpoints . check_block ( blk_height , id , nullptr , & service_node_checkpoint ) )
{
if ( ! service_node_checkpoint )
2019-06-26 06:00:05 +02:00
{
2020-08-20 10:37:18 +02:00
LOG_ERROR ( " CHECKPOINT VALIDATION FAILED FOR ALT BLOCK " ) ;
bvc . m_verifivation_failed = true ;
return false ;
2019-06-26 06:00:05 +02:00
}
2020-08-20 10:37:18 +02:00
}
difficulty_type const main_chain_cumulative_difficulty = m_db - > get_block_cumulative_difficulty ( m_db - > height ( ) - 1 ) ;
bool alt_chain_has_greater_pow = alt_data . cumulative_difficulty > main_chain_cumulative_difficulty ;
bool alt_chain_has_more_checkpoints = ( num_checkpoints_on_alt_chain > num_checkpoints_on_chain ) ;
bool alt_chain_has_equal_checkpoints = ( num_checkpoints_on_alt_chain = = num_checkpoints_on_chain ) ;
2019-06-26 06:00:05 +02:00
2020-08-20 10:37:18 +02:00
// NOTE: Execute Alt Block Hooks
{
std : : vector < transaction > txs ;
std : : vector < crypto : : hash > missed ;
if ( ! get_transactions ( b . tx_hashes , txs , missed ) )
2019-08-28 07:54:02 +02:00
{
2020-08-20 10:37:18 +02:00
bvc . m_verifivation_failed = true ;
return false ;
}
2019-08-28 07:54:02 +02:00
2020-08-20 10:37:18 +02:00
for ( AltBlockAddedHook * hook : m_alt_block_added_hooks )
{
if ( ! hook - > alt_block_added ( b , txs , checkpoint ) )
return false ;
2019-08-28 07:54:02 +02:00
}
2020-08-20 10:37:18 +02:00
}
2019-08-28 07:54:02 +02:00
2020-08-20 10:37:18 +02:00
if ( b . major_version > = network_version_13_enforce_checkpoints )
{
if ( alt_chain_has_more_checkpoints | | ( alt_chain_has_greater_pow & & alt_chain_has_equal_checkpoints ) )
2015-12-14 06:40:16 +01:00
{
2020-08-20 10:37:18 +02:00
bool keep_alt_chain = false ;
if ( alt_chain_has_more_checkpoints )
2019-07-11 08:16:16 +02:00
{
2020-08-20 10:37:18 +02:00
MGINFO_GREEN ( " ###### REORGANIZE on height: " < < alt_chain . front ( ) . height < < " of " < < m_db - > height ( ) - 1 < < " , checkpoint is found in alternative chain on height " < < blk_height ) ;
2019-08-22 08:28:56 +02:00
}
2015-12-14 06:40:16 +01:00
else
2019-08-22 08:28:56 +02:00
{
2020-08-20 10:37:18 +02:00
keep_alt_chain = true ;
MGINFO_GREEN ( " ###### REORGANIZE on height: " < < alt_chain . front ( ) . height < < " of " < < m_db - > height ( ) - 1 < < " with cum_difficulty " < < m_db - > get_block_cumulative_difficulty ( m_db - > height ( ) - 1 ) < < std : : endl < < " alternative blockchain size: " < < alt_chain . size ( ) < < " with cum_difficulty " < < alt_data . cumulative_difficulty ) ;
2019-08-22 08:28:56 +02:00
}
2020-08-20 10:37:18 +02:00
bool r = switch_to_alternative_blockchain ( alt_chain , keep_alt_chain ) ;
if ( r )
bvc . m_added_to_main_chain = true ;
else
bvc . m_verifivation_failed = true ;
return r ;
2014-10-07 01:46:25 +02:00
}
else
{
2020-08-20 10:37:18 +02:00
MGINFO_BLUE ( " ----- BLOCK ADDED AS ALTERNATIVE ON HEIGHT " < < blk_height < < std : : endl < < " id: \t " < < id < < std : : endl < < " PoW: \t " < < blk_pow . proof_of_work < < std : : endl < < " difficulty: \t " < < current_diff ) ;
return true ;
2014-10-07 01:46:25 +02:00
}
2015-12-14 06:40:16 +01:00
}
else
{
2020-08-20 10:37:18 +02:00
if ( alt_chain_has_greater_pow )
{
MGINFO_GREEN ( " ###### REORGANIZE on height: " < < alt_chain . front ( ) . height < < " of " < < m_db - > height ( ) - 1 < < " with cum_difficulty " < < m_db - > get_block_cumulative_difficulty ( m_db - > height ( ) - 1 ) < < std : : endl < < " alternative blockchain size: " < < alt_chain . size ( ) < < " with cum_difficulty " < < alt_data . cumulative_difficulty ) ;
bool r = switch_to_alternative_blockchain ( alt_chain , true ) ;
if ( r )
bvc . m_added_to_main_chain = true ;
else
bvc . m_verifivation_failed = true ;
return r ;
}
else
{
MGINFO_BLUE ( " ----- BLOCK ADDED AS ALTERNATIVE ON HEIGHT " < < blk_height < < std : : endl < < " id: \t " < < id < < std : : endl < < " PoW: \t " < < blk_pow . proof_of_work < < std : : endl < < " difficulty: \t " < < current_diff ) ;
return true ;
}
2015-12-14 06:40:16 +01:00
}
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2018-04-16 01:16:02 +02:00
bool Blockchain : : get_blocks ( uint64_t start_offset , size_t count , std : : vector < std : : pair < cryptonote : : blobdata , block > > & blocks , std : : vector < cryptonote : : blobdata > & txs ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2017-09-27 01:31:06 +02:00
if ( start_offset > = m_db - > height ( ) )
2015-12-14 06:40:16 +01:00
return false ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
if ( ! get_blocks ( start_offset , count , blocks ) )
{
return false ;
}
2014-10-07 01:46:25 +02:00
2017-01-15 17:05:55 +01:00
for ( const auto & blk : blocks )
2015-12-14 06:40:16 +01:00
{
2018-04-16 01:16:02 +02:00
std : : vector < crypto : : hash > missed_ids ;
2017-01-15 17:05:55 +01:00
get_transactions_blobs ( blk . second . tx_hashes , txs , missed_ids ) ;
2015-12-14 06:40:16 +01:00
CHECK_AND_ASSERT_MES ( ! missed_ids . size ( ) , false , " has missed transactions in own block in main blockchain " ) ;
}
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2018-04-16 01:16:02 +02:00
bool Blockchain : : get_blocks ( uint64_t start_offset , size_t count , std : : vector < std : : pair < cryptonote : : blobdata , block > > & blocks ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2018-04-16 01:16:02 +02:00
const uint64_t height = m_db - > height ( ) ;
if ( start_offset > = height )
2015-12-14 06:40:16 +01:00
return false ;
2014-10-07 01:46:25 +02:00
2019-08-11 05:46:59 +02:00
const size_t num_blocks = std : : min < uint64_t > ( height - start_offset , count ) ;
blocks . reserve ( blocks . size ( ) + num_blocks ) ;
for ( size_t i = 0 ; i < num_blocks ; i + + )
2015-12-14 06:40:16 +01:00
{
2019-08-11 05:46:59 +02:00
blocks . emplace_back ( m_db - > get_block_blob_from_height ( start_offset + i ) , block { } ) ;
2017-01-15 17:05:55 +01:00
if ( ! parse_and_validate_block_from_blob ( blocks . back ( ) . first , blocks . back ( ) . second ) )
{
LOG_ERROR ( " Invalid block " ) ;
return false ;
}
2015-12-14 06:40:16 +01:00
}
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
//TODO: This function *looks* like it won't need to be rewritten
// to use BlockchainDB, as it calls other functions that were,
// but it warrants some looking into later.
2016-03-25 07:22:06 +01:00
//
//FIXME: This function appears to want to return false if any transactions
// that belong with blocks are missing, but not if blocks themselves
// are missing.
2019-11-18 23:18:41 +01:00
bool Blockchain : : handle_get_blocks ( NOTIFY_REQUEST_GET_BLOCKS : : request & arg , NOTIFY_RESPONSE_GET_BLOCKS : : request & rsp )
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock blockchain_lock { m_blockchain_lock , std : : defer_lock } ;
2019-11-18 23:18:41 +01:00
auto blink_lock = m_tx_pool . blink_shared_lock ( std : : defer_lock ) ;
2020-01-18 18:56:31 +01:00
std : : lock ( blockchain_lock , blink_lock ) ;
2019-11-18 23:38:16 +01:00
2019-04-05 11:28:30 +02:00
db_rtxn_guard rtxn_guard ( m_db ) ;
2015-12-14 06:40:16 +01:00
rsp . current_blockchain_height = get_current_blockchain_height ( ) ;
2018-04-16 01:16:02 +02:00
std : : vector < std : : pair < cryptonote : : blobdata , block > > blocks ;
2015-12-14 06:40:16 +01:00
get_blocks ( arg . blocks , blocks , rsp . missed_ids ) ;
2014-10-07 01:46:25 +02:00
2019-06-13 10:01:08 +02:00
uint64_t const top_height = ( m_db - > height ( ) - 1 ) ;
uint64_t const earliest_height_to_sync_checkpoints_granularly =
( top_height < service_nodes : : CHECKPOINT_STORE_PERSISTENTLY_INTERVAL )
? 0
: top_height - service_nodes : : CHECKPOINT_STORE_PERSISTENTLY_INTERVAL ;
2018-04-18 12:41:52 +02:00
for ( auto & bl : blocks )
2015-12-14 06:40:16 +01:00
{
2019-11-06 07:00:49 +01:00
auto & block_blob = bl . first ;
auto & block = bl . second ;
2016-03-25 07:22:06 +01:00
2018-04-18 12:41:52 +02:00
rsp . blocks . push_back ( block_complete_entry ( ) ) ;
2019-11-06 07:00:49 +01:00
block_complete_entry & block_entry = rsp . blocks . back ( ) ;
2018-04-18 12:41:52 +02:00
2019-11-06 07:00:49 +01:00
uint64_t const block_height = get_block_height ( block ) ;
2019-06-13 10:01:08 +02:00
uint64_t checkpoint_interval = service_nodes : : CHECKPOINT_STORE_PERSISTENTLY_INTERVAL ;
if ( block_height > = earliest_height_to_sync_checkpoints_granularly )
checkpoint_interval = service_nodes : : CHECKPOINT_INTERVAL ;
if ( ( block_height % checkpoint_interval ) = = 0 )
2019-06-04 05:50:31 +02:00
{
try
{
checkpoint_t checkpoint ;
2019-08-14 05:41:46 +02:00
if ( get_checkpoint ( block_height , checkpoint ) )
2019-11-06 07:00:49 +01:00
block_entry . checkpoint = t_serializable_object_to_blob ( checkpoint ) ;
2019-06-04 05:50:31 +02:00
}
catch ( const std : : exception & e )
{
MERROR ( " Get block checkpoint from DB failed non-trivially at height: " < < block_height < < " , what = " < < e . what ( ) ) ;
return false ;
}
}
2016-03-25 07:22:06 +01:00
// FIXME: s/rsp.missed_ids/missed_tx_id/ ? Seems like rsp.missed_ids
// is for missed blocks, not missed transactions as well.
2019-11-18 23:18:41 +01:00
std : : vector < crypto : : hash > missed_tx_ids ;
2019-11-06 07:00:49 +01:00
get_transactions_blobs ( block . tx_hashes , block_entry . txs , missed_tx_ids ) ;
2015-10-08 04:28:11 +02:00
2020-01-18 18:56:31 +01:00
for ( auto & h : block . tx_hashes )
2019-11-18 23:18:41 +01:00
{
2020-01-18 18:56:31 +01:00
if ( auto blink = m_tx_pool . get_blink ( h ) )
2019-11-18 23:18:41 +01:00
{
2020-01-18 18:56:31 +01:00
auto l = blink - > shared_lock ( ) ;
block_entry . blinks . emplace_back ( ) ;
blink - > fill_serialization_data ( block_entry . blinks . back ( ) ) ;
2019-11-18 23:18:41 +01:00
}
}
2015-10-08 04:28:11 +02:00
if ( missed_tx_ids . size ( ) ! = 0 )
{
2019-06-16 12:57:38 +02:00
// do not display an error if the peer asked for an unpruned block which we are not meant to have
2020-04-06 07:47:49 +02:00
if ( tools : : has_unpruned_block ( get_block_height ( block ) , get_current_blockchain_height ( ) , get_blockchain_pruning_seed ( ) ) )
2019-06-16 12:57:38 +02:00
{
LOG_ERROR ( " Error retrieving blocks, missed " < < missed_tx_ids . size ( )
2020-04-06 07:47:49 +02:00
< < " transactions for block with hash: " < < get_block_hash ( block )
2019-06-16 12:57:38 +02:00
< < std : : endl
) ;
}
2015-10-08 04:28:11 +02:00
2018-04-16 01:16:02 +02:00
rsp . missed_ids . insert ( rsp . missed_ids . end ( ) , missed_tx_ids . begin ( ) , missed_tx_ids . end ( ) ) ;
2015-10-08 04:28:11 +02:00
return false ;
}
2015-12-14 06:40:16 +01:00
//pack block
2019-11-06 07:00:49 +01:00
block_entry . block = std : : move ( block_blob ) ;
2015-12-14 06:40:16 +01:00
}
2019-11-18 23:18:41 +01:00
return true ;
}
//------------------------------------------------------------------
bool Blockchain : : handle_get_txs ( NOTIFY_REQUEST_GET_TXS : : request & arg , NOTIFY_NEW_TRANSACTIONS : : request & rsp )
{
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock blockchain_lock { m_blockchain_lock , std : : defer_lock } ;
2019-11-18 23:18:41 +01:00
auto blink_lock = m_tx_pool . blink_shared_lock ( std : : defer_lock ) ;
2020-01-18 18:56:31 +01:00
std : : lock ( blockchain_lock , blink_lock ) ;
2019-11-18 23:38:16 +01:00
2019-11-18 23:18:41 +01:00
db_rtxn_guard rtxn_guard ( m_db ) ;
2019-11-20 01:24:48 +01:00
std : : vector < crypto : : hash > missed ;
2019-11-18 23:18:41 +01:00
2019-11-20 01:24:48 +01:00
// First check the blockchain for any txs:
get_transactions_blobs ( arg . txs , rsp . txs , missed ) ;
2019-11-18 23:18:41 +01:00
2019-11-20 01:24:48 +01:00
// Look for any missed txes in the mempool:
m_tx_pool . find_transactions ( missed , rsp . txs ) ;
2019-11-18 23:18:41 +01:00
2020-01-18 18:56:31 +01:00
for ( auto & h : arg . txs )
2019-11-18 23:18:41 +01:00
{
2020-01-18 18:56:31 +01:00
if ( auto blink = m_tx_pool . get_blink ( h ) )
2019-11-18 23:18:41 +01:00
{
2020-01-18 18:56:31 +01:00
rsp . blinks . emplace_back ( ) ;
auto l = blink - > shared_lock ( ) ;
blink - > fill_serialization_data ( rsp . blinks . back ( ) ) ;
2019-11-18 23:18:41 +01:00
}
}
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2018-04-16 01:16:02 +02:00
bool Blockchain : : get_alternative_blocks ( std : : vector < block > & blocks ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2014-10-07 01:46:25 +02:00
2019-05-08 13:11:23 +02:00
blocks . reserve ( m_db - > get_alt_block_count ( ) ) ;
2019-09-11 02:19:19 +02:00
m_db - > for_all_alt_blocks ( [ & blocks ] ( const crypto : : hash & blkid , const cryptonote : : alt_block_data_t & data , const cryptonote : : blobdata * block_blob , const cryptonote : : blobdata * checkpoint_blob ) {
if ( ! block_blob )
2019-05-08 13:11:23 +02:00
{
MERROR ( " No blob, but blobs were requested " ) ;
return false ;
}
cryptonote : : block bl ;
2019-09-11 02:19:19 +02:00
if ( cryptonote : : parse_and_validate_block_from_blob ( * block_blob , bl ) )
2019-05-08 13:11:23 +02:00
blocks . push_back ( std : : move ( bl ) ) ;
else
MERROR ( " Failed to parse block from blob " ) ;
return true ;
} , true ) ;
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2014-12-06 23:40:33 +01:00
size_t Blockchain : : get_alternative_blocks_count ( ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2019-05-08 13:11:23 +02:00
return m_db - > get_alt_block_count ( ) ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
// This function adds the output specified by <amount, i> to the result_outs container
// unlocked and other such checks should be done by here.
2017-04-06 21:01:29 +02:00
uint64_t Blockchain : : get_num_mature_outputs ( uint64_t amount ) const
{
2017-09-05 18:20:27 +02:00
uint64_t num_outs = m_db - > get_num_outputs ( amount ) ;
2017-04-06 21:01:29 +02:00
// ensure we don't include outputs that aren't yet eligible to be used
// outpouts are sorted by height
2018-11-20 21:19:39 +01:00
const uint64_t blockchain_height = m_db - > height ( ) ;
2017-04-06 21:01:29 +02:00
while ( num_outs > 0 )
{
const tx_out_index toi = m_db - > get_output_tx_and_index ( amount , num_outs - 1 ) ;
const uint64_t height = m_db - > get_tx_block_height ( toi . first ) ;
2018-11-20 21:19:39 +01:00
if ( height + CRYPTONOTE_DEFAULT_TX_SPENDABLE_AGE < = blockchain_height )
2017-04-06 21:01:29 +02:00
break ;
- - num_outs ;
}
return num_outs ;
}
crypto : : public_key Blockchain : : get_output_key ( uint64_t amount , uint64_t global_index ) const
{
output_data_t data = m_db - > get_output_key ( amount , global_index ) ;
return data . pubkey ;
}
2016-06-05 11:46:18 +02:00
//------------------------------------------------------------------
RPC overhaul
High-level details:
This redesigns the RPC layer to make it much easier to work with,
decouples it from an embedded HTTP server, and gets the vast majority of
the RPC serialization and dispatch code out of a very commonly included
header.
There is unfortunately rather a lot of interconnected code here that
cannot be easily separated out into separate commits. The full details
of what happens here are as follows:
Major details:
- All of the RPC code is now in a `cryptonote::rpc` namespace; this
renames quite a bit to be less verbose: e.g. CORE_RPC_STATUS_OK
becomes `rpc::STATUS_OK`, and `cryptonote::COMMAND_RPC_SOME_LONG_NAME`
becomes `rpc::SOME_LONG_NAME` (or just SOME_LONG_NAME for code already
working in the `rpc` namespace).
- `core_rpc_server` is now completely decoupled from providing any
request protocol: it is now *just* the core RPC call handler.
- The HTTP RPC interface now lives in a new rpc/http_server.h; this code
handles listening for HTTP requests and dispatching them to
core_rpc_server, then sending the results back to the caller.
- There is similarly a rpc/lmq_server.h for LMQ RPC code; more details
on this (and other LMQ specifics) below.
- RPC implementing code now returns the response object and throws when
things go wrong which simplifies much of the rpc error handling. They
can throw anything; generic exceptions get logged and a generic
"internal error" message gets returned to the caller, but there is
also an `rpc_error` class to return an error code and message used by
some json-rpc commands.
- RPC implementing functions now overload `core_rpc_server::invoke`
following the pattern:
RPC_BLAH_BLAH::response core_rpc_server::invoke(RPC_BLAH_BLAH::request&& req, rpc_context context);
This overloading makes the code vastly simpler: all instantiations are
now done with a small amount of generic instantiation code in a single
.cpp rather than needing to go to hell and back with a nest of epee
macros in a core header.
- each RPC endpoint is now defined by the RPC types themselves,
including its accessible names and permissions, in
core_rpc_server_commands_defs.h:
- every RPC structure now has a static `names()` function that returns
the names by which the end point is accessible. (The first one is
the primary, the others are for deprecated aliases).
- RPC command wrappers define their permissions and type by inheriting
from special tag classes:
- rpc::RPC_COMMAND is a basic, admin-only, JSON command, available
via JSON RPC. *All* JSON commands are now available via JSON RPC,
instead of the previous mix of some being at /foo and others at
/json_rpc. (Ones that were previously at /foo are still there for
backwards compatibility; see `rpc::LEGACY` below).
- rpc::PUBLIC specifies that the command should be available via a
restricted RPC connection.
- rpc::BINARY specifies that the command is not JSON, but rather is
accessible as /name and takes and returns values in the magic epee
binary "portable storage" (lol) data format.
- rpc::LEGACY specifies that the command should be available via the
non-json-rpc interface at `/name` for backwards compatibility (in
addition to the JSON-RPC interface).
- some epee serialization got unwrapped and de-templatized so that it
can be moved into a .cpp file with just declarations in the .h. (This
makes a *huge* difference for core_rpc_server_commands_defs.h and for
every compilation unit that includes it which previously had to
compile all the serialization code and then throw all by one copy away
at link time). This required some new macros so as to not break a ton
of places that will use the old way putting everything in the headers;
The RPC code uses this as does a few other places; there are comments
in contrib/epee/include/serialization/keyvalue_serialization.h as to
how to use it.
- Detemplatized a bunch of epee/storages code. Most of it should have
have been using templates at all (because it can only ever be called
with one type!), and now it isn't. This broke some things that didn't
properly compile because of missing headers or (in one case) a messed
up circular dependency.
- Significantly simplified a bunch of over-templatized serialization
code.
- All RPC serialization definitions is now out of
core_rpc_server_commands_defs.h and into a single .cpp file
(core_rpc_server_commands_defs.cpp).
- core RPC no longer uses the disgusting
BEGIN_URI_MAP2/MAP_URI_BLAH_BLAH macros. This was a terrible design
that forced slamming tons of code into a common header that didn't
need to be there.
- epee::struct_init is gone. It was a horrible hack that instiated
multiple templates just so the coder could be so lazy and write
`some_type var;` instead of properly value initializing with
`some_type var{};`.
- Removed a bunch of useless crap from epee. In particular, forcing
extra template instantiations all over the place in order to nest
return objects inside JSON RPC values is no longer needed, as are a
bunch of stuff related to the above de-macroization of the code.
- get_all_service_nodes, get_service_nodes, and get_n_service_nodes are
now combined into a single `get_service_nodes` (with deprecated
aliases for the others), which eliminates a fair amount of
duplication. The biggest obstacle here was getting the requested
fields reference passed through: this is now done by a new ability to
stash a context in the serialization object that can be retrieved by a
sub-serialized type.
LMQ-specifics:
- The LokiMQ instance moves into `cryptonote::core` rather than being
inside cryptonote_protocol. Currently the instance is used both for
qnet and rpc calls (and so needs to be in a common place), but I also
intend future PRs to use the batching code for job processing
(replacing the current threaded job queue).
- rpc/lmq_server.h handles the actual LMQ-request-to-core-RPC glue.
Unlike http_server it isn't technically running the whole LMQ stack
from here, but the parallel name with http_server seemed appropriate.
- All RPC endpoints are supported by LMQ under the same names as defined
generically, but prefixed with `rpc.` for public commands and `admin.`
for restricted ones.
- service node keys are now always available, even when not running in
`--service-node` mode: this is because we want the x25519 key for
being able to offer CURVE encryption for lmq RPC end-points, and
because it doesn't hurt to have them available all the time. In the
RPC layer this is now called "get_service_keys" (with
"get_service_node_key" as an alias) since they aren't strictly only
for service nodes. This also means code needs to check
m_service_node, and not m_service_node_keys, to tell if it is running
as a service node. (This is also easier to notice because
m_service_node_keys got renamed to `m_service_keys`).
- Added block and mempool monitoring LMQ RPC endpoints: `sub.block` and
`sub.mempool` subscribes the connection for new block and new mempool
TX notifications. The latter can notify on just blink txes, or all
new mempool txes (but only new ones -- txes dumped from a block don't
trigger it). The client gets pushed a [`notify.block`, `height`,
`hash`] or [`notify.tx`, `txhash`, `blob`] message when something
arrives.
Minor details:
- rpc::version_t is now a {major,minor} pair. Forcing everyone to pack
and unpack a uint32_t was gross.
- Changed some macros to constexprs (e.g. CORE_RPC_ERROR_CODE_...).
(This immediately revealed a couple of bugs in the RPC code that was
assigning CORE_RPC_ERROR_CODE_... to a string, and it worked because
the macro allows implicit conversion to a char).
- De-templatizing useless templates in epee (i.e. a bunch of templated
types that were never invoked with different types) revealed a painful
circular dependency between epee and non-epee code for tor_address and
i2p_address. This crap is now handled in a suitably named
`net/epee_network_address_hack.cpp` hack because it really isn't
trivial to extricate this mess.
- Removed `epee/include/serialization/serialize_base.h`. Amazingly the
code somehow still all works perfectly with this previously vital
header removed.
- Removed bitrotted, unused epee "crypted_storage" and
"gzipped_inmemstorage" code.
- Replaced a bunch of epee::misc_utils::auto_scope_leave_caller with
LOKI_DEFERs. The epee version involves quite a bit more instantiation
and is ugly as sin. Also made the `loki::defer` class invokable for
some edge cases that need calling before destruction in particular
conditions.
- Moved the systemd code around; it makes much more sense to do the
systemd started notification as in daemon.cpp as late as possible
rather than in core (when we can still have startup failures, e.g. if
the RPC layer can't start).
- Made the systemd short status string available in the get_info RPC
(and no longer require building with systemd).
- during startup, print (only) the x25519 when not in SN mode, and
continue to print all three when in SN mode.
- DRYed out some RPC implementation code (such as set_limit)
- Made wallet_rpc stop using a raw m_wallet pointer
2020-04-28 01:25:43 +02:00
bool Blockchain : : get_outs ( const rpc : : GET_OUTPUTS_BIN : : request & req , rpc : : GET_OUTPUTS_BIN : : response & res ) const
2016-08-02 22:48:09 +02:00
{
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2016-08-02 22:48:09 +02:00
res . outs . clear ( ) ;
res . outs . reserve ( req . outputs . size ( ) ) ;
2018-11-07 22:13:00 +01:00
std : : vector < cryptonote : : output_data_t > data ;
2018-06-01 22:52:04 +02:00
try
2016-08-02 22:48:09 +02:00
{
2018-11-07 22:13:00 +01:00
std : : vector < uint64_t > amounts , offsets ;
amounts . reserve ( req . outputs . size ( ) ) ;
offsets . reserve ( req . outputs . size ( ) ) ;
2018-06-01 22:52:04 +02:00
for ( const auto & i : req . outputs )
{
2018-11-07 22:13:00 +01:00
amounts . push_back ( i . amount ) ;
offsets . push_back ( i . index ) ;
}
m_db - > get_output_key ( epee : : span < const uint64_t > ( amounts . data ( ) , amounts . size ( ) ) , offsets , data ) ;
if ( data . size ( ) ! = req . outputs . size ( ) )
{
MERROR ( " Unexpected output data size: expected " < < req . outputs . size ( ) < < " , got " < < data . size ( ) ) ;
return false ;
}
for ( const auto & t : data )
2018-12-10 04:54:27 +01:00
res . outs . push_back ( { t . pubkey , t . commitment , is_output_spendtime_unlocked ( t . unlock_time ) , t . height , crypto : : null_hash } ) ;
2016-08-02 22:48:09 +02:00
2018-11-07 22:13:00 +01:00
if ( req . get_txid )
{
for ( size_t i = 0 ; i < req . outputs . size ( ) ; + + i )
{
tx_out_index toi = m_db - > get_output_tx_and_index ( req . outputs [ i ] . amount , req . outputs [ i ] . index ) ;
res . outs [ i ] . txid = toi . first ;
}
2018-06-01 22:52:04 +02:00
}
}
catch ( const std : : exception & e )
{
return false ;
2016-08-02 22:48:09 +02:00
}
return true ;
}
//------------------------------------------------------------------
2017-04-06 21:01:29 +02:00
void Blockchain : : get_output_key_mask_unlocked ( const uint64_t & amount , const uint64_t & index , crypto : : public_key & key , rct : : key & mask , bool & unlocked ) const
{
const auto o_data = m_db - > get_output_key ( amount , index ) ;
key = o_data . pubkey ;
mask = o_data . commitment ;
2018-08-03 03:39:28 +02:00
unlocked = is_output_spendtime_unlocked ( o_data . unlock_time ) ;
2017-04-06 21:01:29 +02:00
}
//------------------------------------------------------------------
2018-05-16 23:41:50 +02:00
bool Blockchain : : get_output_distribution ( uint64_t amount , uint64_t from_height , uint64_t to_height , uint64_t & start_height , std : : vector < uint64_t > & distribution , uint64_t & base ) const
2018-02-19 12:15:15 +01:00
{
2018-09-19 11:15:03 +02:00
// rct outputs don't exist before v4, NOTE(loki): we started from v7 so our start is always 0
start_height = 0 ;
2018-02-19 12:15:15 +01:00
base = 0 ;
2018-05-22 15:46:30 +02:00
if ( to_height > 0 & & to_height < from_height )
return false ;
2018-02-19 12:15:15 +01:00
if ( from_height > start_height )
start_height = from_height ;
2018-05-22 15:46:30 +02:00
distribution . clear ( ) ;
uint64_t db_height = m_db - > height ( ) ;
if ( db_height = = 0 )
return false ;
if ( start_height > = db_height | | to_height > = db_height )
return false ;
Infinite Staking Part 2 (#406)
* Cleanup and undoing some protocol breakages
* Simplify expiration of nodes
* Request unlock schedules entire node for expiration
* Fix off by one in expiring nodes
* Undo expiring code for pre v10 nodes
* Fix RPC returning register as unlock height and not checking 0
* Rename key image unlock height const
* Undo testnet hardfork debug changes
* Remove is_type for get_type, fix missing var rename
* Move serialisable data into public namespace
* Serialise tx types properly
* Fix typo in no service node known msg
* Code review
* Fix == to >= on serialising tx type
* Code review 2
* Fix tests and key image unlock
* Add command to print locked key images
* Update ui to display lock stakes, query in print cmd blacklist
* Modify print stakes to be less slow
* Remove autostaking code
* Refactor staking into sweep functions
It appears staking was derived off stake_main written separately at
implementation at the beginning. This merges them back into a common
code path, after removing autostake there's only some minor differences.
It also makes sure that any changes to sweeping upstream are going to be
considered in the staking process which we want.
* Display unlock height for stakes
* Begin creating output blacklist
* Make blacklist output a migration step
* Implement get_output_blacklist for lmdb
* In wallet output selection ignore blacklisted outputs
* Apply blacklisted outputs to output selection
* Fix broken tests, switch key image unlock
* Fix broken unit_tests
* Begin change to limit locked key images to 4 globally
* Revamp prepare registration for new min contribution rules
* Fix up old back case in prepare registration
* Remove debug code
* Cleanup debug code and some unecessary changes
* Fix migration step on mainnet db
* Fix blacklist outputs for pre-existing DB's
* Remove irrelevant note
* Tweak scanning addresses for locked stakes
Since we only now allow contributions from the primary address we can
skip checking all subaddress + lookahead to speed up wallet scanning
* Define macro for SCNu64 for Mingw
* Fix failure on empty DB
* Add missing error msg, remove contributor from stake
* Improve staking messages
* Flush prompt to always display
* Return the msg from stake failure and fix stake parsing error
* Tweak fork rules for smaller bulletproofs
* Tweak pooled nodes minimum amounts
* Fix crash on exit, there's no need to store on destructor
Since all information about service nodes is derived from the blockchain
and we store state every time we receive a block, storing in the
destructor is redundant as there is no new information to store.
* Make prompt be consistent with CLI
* Check max number of key images from per user to node
* Implement error message on get_output_blacklist failure
* Remove resolved TODO's/comments
* Handle infinite staking in print_sn
* Atoi->strtol, fix prepare_registration, virtual override, stale msgs
2019-02-14 02:12:57 +01:00
2018-05-22 15:46:30 +02:00
if ( amount = = 0 )
{
std : : vector < uint64_t > heights ;
heights . reserve ( to_height + 1 - start_height ) ;
2019-04-29 18:53:38 +02:00
const uint64_t real_start_height = start_height > 0 ? start_height - 1 : start_height ;
2018-11-06 12:02:27 +01:00
for ( uint64_t h = real_start_height ; h < = to_height ; + + h )
2018-05-22 15:46:30 +02:00
heights . push_back ( h ) ;
distribution = m_db - > get_block_cumulative_rct_outputs ( heights ) ;
2018-11-06 12:02:27 +01:00
if ( start_height > 0 )
{
base = distribution [ 0 ] ;
distribution . erase ( distribution . begin ( ) ) ;
}
2018-05-22 15:46:30 +02:00
return true ;
}
else
{
return m_db - > get_output_distribution ( amount , start_height , to_height , distribution , base ) ;
}
2018-02-19 12:15:15 +01:00
}
//------------------------------------------------------------------
2020-06-02 07:50:27 +02:00
void Blockchain : : get_output_blacklist ( std : : vector < uint64_t > & blacklist ) const
Infinite Staking Part 2 (#406)
* Cleanup and undoing some protocol breakages
* Simplify expiration of nodes
* Request unlock schedules entire node for expiration
* Fix off by one in expiring nodes
* Undo expiring code for pre v10 nodes
* Fix RPC returning register as unlock height and not checking 0
* Rename key image unlock height const
* Undo testnet hardfork debug changes
* Remove is_type for get_type, fix missing var rename
* Move serialisable data into public namespace
* Serialise tx types properly
* Fix typo in no service node known msg
* Code review
* Fix == to >= on serialising tx type
* Code review 2
* Fix tests and key image unlock
* Add command to print locked key images
* Update ui to display lock stakes, query in print cmd blacklist
* Modify print stakes to be less slow
* Remove autostaking code
* Refactor staking into sweep functions
It appears staking was derived off stake_main written separately at
implementation at the beginning. This merges them back into a common
code path, after removing autostake there's only some minor differences.
It also makes sure that any changes to sweeping upstream are going to be
considered in the staking process which we want.
* Display unlock height for stakes
* Begin creating output blacklist
* Make blacklist output a migration step
* Implement get_output_blacklist for lmdb
* In wallet output selection ignore blacklisted outputs
* Apply blacklisted outputs to output selection
* Fix broken tests, switch key image unlock
* Fix broken unit_tests
* Begin change to limit locked key images to 4 globally
* Revamp prepare registration for new min contribution rules
* Fix up old back case in prepare registration
* Remove debug code
* Cleanup debug code and some unecessary changes
* Fix migration step on mainnet db
* Fix blacklist outputs for pre-existing DB's
* Remove irrelevant note
* Tweak scanning addresses for locked stakes
Since we only now allow contributions from the primary address we can
skip checking all subaddress + lookahead to speed up wallet scanning
* Define macro for SCNu64 for Mingw
* Fix failure on empty DB
* Add missing error msg, remove contributor from stake
* Improve staking messages
* Flush prompt to always display
* Return the msg from stake failure and fix stake parsing error
* Tweak fork rules for smaller bulletproofs
* Tweak pooled nodes minimum amounts
* Fix crash on exit, there's no need to store on destructor
Since all information about service nodes is derived from the blockchain
and we store state every time we receive a block, storing in the
destructor is redundant as there is no new information to store.
* Make prompt be consistent with CLI
* Check max number of key images from per user to node
* Implement error message on get_output_blacklist failure
* Remove resolved TODO's/comments
* Handle infinite staking in print_sn
* Atoi->strtol, fix prepare_registration, virtual override, stale msgs
2019-02-14 02:12:57 +01:00
{
2020-06-02 07:50:27 +02:00
m_db - > get_output_blacklist ( blacklist ) ;
Infinite Staking Part 2 (#406)
* Cleanup and undoing some protocol breakages
* Simplify expiration of nodes
* Request unlock schedules entire node for expiration
* Fix off by one in expiring nodes
* Undo expiring code for pre v10 nodes
* Fix RPC returning register as unlock height and not checking 0
* Rename key image unlock height const
* Undo testnet hardfork debug changes
* Remove is_type for get_type, fix missing var rename
* Move serialisable data into public namespace
* Serialise tx types properly
* Fix typo in no service node known msg
* Code review
* Fix == to >= on serialising tx type
* Code review 2
* Fix tests and key image unlock
* Add command to print locked key images
* Update ui to display lock stakes, query in print cmd blacklist
* Modify print stakes to be less slow
* Remove autostaking code
* Refactor staking into sweep functions
It appears staking was derived off stake_main written separately at
implementation at the beginning. This merges them back into a common
code path, after removing autostake there's only some minor differences.
It also makes sure that any changes to sweeping upstream are going to be
considered in the staking process which we want.
* Display unlock height for stakes
* Begin creating output blacklist
* Make blacklist output a migration step
* Implement get_output_blacklist for lmdb
* In wallet output selection ignore blacklisted outputs
* Apply blacklisted outputs to output selection
* Fix broken tests, switch key image unlock
* Fix broken unit_tests
* Begin change to limit locked key images to 4 globally
* Revamp prepare registration for new min contribution rules
* Fix up old back case in prepare registration
* Remove debug code
* Cleanup debug code and some unecessary changes
* Fix migration step on mainnet db
* Fix blacklist outputs for pre-existing DB's
* Remove irrelevant note
* Tweak scanning addresses for locked stakes
Since we only now allow contributions from the primary address we can
skip checking all subaddress + lookahead to speed up wallet scanning
* Define macro for SCNu64 for Mingw
* Fix failure on empty DB
* Add missing error msg, remove contributor from stake
* Improve staking messages
* Flush prompt to always display
* Return the msg from stake failure and fix stake parsing error
* Tweak fork rules for smaller bulletproofs
* Tweak pooled nodes minimum amounts
* Fix crash on exit, there's no need to store on destructor
Since all information about service nodes is derived from the blockchain
and we store state every time we receive a block, storing in the
destructor is redundant as there is no new information to store.
* Make prompt be consistent with CLI
* Check max number of key images from per user to node
* Implement error message on get_output_blacklist failure
* Remove resolved TODO's/comments
* Handle infinite staking in print_sn
* Atoi->strtol, fix prepare_registration, virtual override, stale msgs
2019-02-14 02:12:57 +01:00
}
//------------------------------------------------------------------
2014-10-07 01:46:25 +02:00
// This function takes a list of block hashes from another node
// on the network to find where the split point is between us and them.
// This is used to see what to send another node that needs to sync.
2014-12-06 23:40:33 +01:00
bool Blockchain : : find_blockchain_supplement ( const std : : list < crypto : : hash > & qblock_ids , uint64_t & starter_offset ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
// make sure the request includes at least the genesis block, otherwise
// how can we expect to sync from the client that the block list came from?
2018-11-23 14:25:15 +01:00
if ( qblock_ids . empty ( ) )
2015-12-14 06:40:16 +01:00
{
2018-06-11 15:36:05 +02:00
MCERROR ( " net.p2p " , " Client sent wrong NOTIFY_REQUEST_CHAIN: m_block_ids.size()= " < < qblock_ids . size ( ) < < " , dropping connection " ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
2019-04-05 11:28:30 +02:00
db_rtxn_guard rtxn_guard ( m_db ) ;
2015-12-14 06:40:16 +01:00
// make sure that the last block in the request's block list matches
// the genesis block
auto gen_hash = m_db - > get_block_hash_from_height ( 0 ) ;
if ( qblock_ids . back ( ) ! = gen_hash )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MCERROR ( " net.p2p " , " Client sent wrong NOTIFY_REQUEST_CHAIN: genesis block mismatch: " < < std : : endl < < " id: " < < qblock_ids . back ( ) < < " , " < < std : : endl < < " expected: " < < gen_hash < < " , " < < std : : endl < < " dropping connection " ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
// Find the first block the foreign chain has that we also have.
// Assume qblock_ids is in reverse-chronological order.
auto bl_it = qblock_ids . begin ( ) ;
uint64_t split_height = 0 ;
for ( ; bl_it ! = qblock_ids . end ( ) ; bl_it + + )
{
try
2014-10-07 01:46:25 +02:00
{
2016-08-30 17:39:33 +02:00
if ( m_db - > block_exists ( * bl_it , & split_height ) )
break ;
2014-10-07 01:46:25 +02:00
}
2015-12-14 06:40:16 +01:00
catch ( const std : : exception & e )
2014-10-07 01:46:25 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MWARNING ( " Non-critical error trying to find block by hash in BlockchainDB, hash: " < < * bl_it ) ;
2015-12-14 06:40:16 +01:00
return false ;
2014-10-07 01:46:25 +02:00
}
2015-12-14 06:40:16 +01:00
}
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
// this should be impossible, as we checked that we share the genesis block,
// but just in case...
if ( bl_it = = qblock_ids . end ( ) )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR ( " Internal error handling connection, can't find split point " ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
//we start to put block ids INCLUDING last known id, just to make other side be sure
starter_offset = split_height ;
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2014-12-06 23:40:33 +01:00
uint64_t Blockchain : : block_difficulty ( uint64_t i ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2017-10-29 14:06:45 +01:00
// WARNING: this function does not take m_blockchain_lock, and thus should only call read only
// m_db functions which do not depend on one another (ie, no getheight + gethash(height-1), as
// well as not accessing class members, even read only (ie, m_invalid_blocks). The caller must
// lock if it is otherwise needed.
2015-12-14 06:40:16 +01:00
try
{
return m_db - > get_block_difficulty ( i ) ;
}
catch ( const BLOCK_DNE & e )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR ( " Attempted to get block difficulty for height above blockchain height " ) ;
2015-12-14 06:40:16 +01:00
}
return 0 ;
}
//------------------------------------------------------------------
2016-03-25 07:22:06 +01:00
//TODO: return type should be void, throw on exception
// alternatively, return true only if no blocks missed
2019-11-03 04:26:09 +01:00
bool Blockchain : : get_blocks ( const std : : vector < crypto : : hash > & block_ids , std : : vector < std : : pair < cryptonote : : blobdata , block > > & blocks , std : : vector < crypto : : hash > & missed_bs ) const
2015-12-14 06:40:16 +01:00
{
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2015-12-14 06:40:16 +01:00
2019-11-03 04:26:09 +01:00
blocks . reserve ( block_ids . size ( ) ) ;
2015-12-14 06:40:16 +01:00
for ( const auto & block_hash : block_ids )
{
2014-10-07 01:46:25 +02:00
try
{
2018-04-29 12:41:54 +02:00
uint64_t height = 0 ;
if ( m_db - > block_exists ( block_hash , & height ) )
2017-01-15 17:05:55 +01:00
{
2018-04-29 12:41:54 +02:00
blocks . push_back ( std : : make_pair ( m_db - > get_block_blob_from_height ( height ) , block ( ) ) ) ;
if ( ! parse_and_validate_block_from_blob ( blocks . back ( ) . first , blocks . back ( ) . second ) )
{
LOG_ERROR ( " Invalid block: " < < block_hash ) ;
blocks . pop_back ( ) ;
missed_bs . push_back ( block_hash ) ;
}
2017-01-15 17:05:55 +01:00
}
2018-04-29 12:41:54 +02:00
else
missed_bs . push_back ( block_hash ) ;
2015-12-14 06:40:16 +01:00
}
catch ( const std : : exception & e )
{
return false ;
2014-10-07 01:46:25 +02:00
}
2015-12-14 06:40:16 +01:00
}
return true ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
//------------------------------------------------------------------
2016-03-25 07:22:06 +01:00
//TODO: return type should be void, throw on exception
// alternatively, return true only if no transactions missed
2019-11-03 04:26:09 +01:00
bool Blockchain : : get_transactions_blobs ( const std : : vector < crypto : : hash > & txs_ids , std : : vector < cryptonote : : blobdata > & txs , std : : vector < crypto : : hash > & missed_txs , bool pruned ) const
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2019-11-03 04:26:09 +01:00
txs . reserve ( txs_ids . size ( ) ) ;
2015-12-14 06:40:16 +01:00
for ( const auto & tx_hash : txs_ids )
{
try
2014-10-28 04:44:45 +01:00
{
2017-01-15 17:05:55 +01:00
cryptonote : : blobdata tx ;
2017-10-01 12:24:33 +02:00
if ( pruned & & m_db - > get_pruned_tx_blob ( tx_hash , tx ) )
txs . push_back ( std : : move ( tx ) ) ;
else if ( ! pruned & & m_db - > get_tx_blob ( tx_hash , tx ) )
2016-12-23 17:38:28 +01:00
txs . push_back ( std : : move ( tx ) ) ;
else
missed_txs . push_back ( tx_hash ) ;
2014-10-28 04:44:45 +01:00
}
2015-12-14 06:40:16 +01:00
catch ( const std : : exception & e )
{
return false ;
}
}
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2019-11-06 07:02:39 +01:00
std : : vector < uint64_t > Blockchain : : get_transactions_heights ( const std : : vector < crypto : : hash > & txs_ids ) const
{
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2019-11-06 07:02:39 +01:00
2019-11-25 05:22:02 +01:00
auto heights = m_db - > get_tx_block_heights ( txs_ids ) ;
for ( auto & h : heights )
if ( h = = std : : numeric_limits < uint64_t > : : max ( ) )
h = 0 ;
2019-11-06 07:02:39 +01:00
return heights ;
}
//------------------------------------------------------------------
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
size_t get_transaction_version ( const cryptonote : : blobdata & bd )
{
size_t version ;
const char * begin = static_cast < const char * > ( bd . data ( ) ) ;
const char * end = begin + bd . size ( ) ;
int read = tools : : read_varint ( begin , end , version ) ;
if ( read < = 0 )
throw std : : runtime_error ( " Internal error getting transaction version " ) ;
return version ;
}
//------------------------------------------------------------------
2019-11-03 04:26:09 +01:00
bool Blockchain : : get_split_transactions_blobs ( const std : : vector < crypto : : hash > & txs_ids , std : : vector < std : : tuple < crypto : : hash , cryptonote : : blobdata , crypto : : hash , cryptonote : : blobdata > > & txs , std : : vector < crypto : : hash > & missed_txs ) const
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
{
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
2019-11-03 04:26:09 +01:00
txs . reserve ( txs_ids . size ( ) ) ;
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
for ( const auto & tx_hash : txs_ids )
{
try
{
cryptonote : : blobdata tx ;
if ( m_db - > get_pruned_tx_blob ( tx_hash , tx ) )
{
2020-08-16 03:29:49 +02:00
auto & [ hash , pruned , pruned_hash , prunable ] = txs . emplace_back ( tx_hash , std : : move ( tx ) , crypto : : null_hash , cryptonote : : blobdata ( ) ) ;
if ( ! is_v1_tx ( pruned ) & & ! m_db - > get_prunable_tx_hash ( tx_hash , pruned_hash ) )
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
{
MERROR ( " Prunable data hash not found for " < < tx_hash ) ;
return false ;
}
2020-08-16 03:29:49 +02:00
if ( ! m_db - > get_prunable_tx_blob ( tx_hash , prunable ) )
prunable . clear ( ) ;
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
}
else
missed_txs . push_back ( tx_hash ) ;
}
catch ( const std : : exception & e )
{
return false ;
}
}
return true ;
}
//------------------------------------------------------------------
2019-11-03 04:26:09 +01:00
bool Blockchain : : get_transactions ( const std : : vector < crypto : : hash > & txs_ids , std : : vector < transaction > & txs , std : : vector < crypto : : hash > & missed_txs ) const
2017-01-15 17:05:55 +01:00
{
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2017-01-15 17:05:55 +01:00
2019-11-03 04:26:09 +01:00
txs . reserve ( txs_ids . size ( ) ) ;
2017-01-15 17:05:55 +01:00
for ( const auto & tx_hash : txs_ids )
{
try
{
cryptonote : : blobdata tx ;
if ( m_db - > get_tx_blob ( tx_hash , tx ) )
{
2019-08-11 05:46:59 +02:00
txs . emplace_back ( ) ;
2017-01-15 17:05:55 +01:00
if ( ! parse_and_validate_tx_from_blob ( tx , txs . back ( ) ) )
{
LOG_ERROR ( " Invalid transaction " ) ;
return false ;
}
}
else
missed_txs . push_back ( tx_hash ) ;
}
catch ( const std : : exception & e )
{
return false ;
}
}
return true ;
}
//------------------------------------------------------------------
2014-10-07 01:46:25 +02:00
// Find the split point between us and foreign blockchain and return
// (by reference) the most recent common block hash along with up to
// BLOCKS_IDS_SYNCHRONIZING_DEFAULT_COUNT additional (more recent) hashes.
2019-04-15 14:29:47 +02:00
bool Blockchain : : find_blockchain_supplement ( const std : : list < crypto : : hash > & qblock_ids , std : : vector < crypto : : hash > & hashes , uint64_t & start_height , uint64_t & current_height , bool clip_pruned ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
// if we can't find the split point, return false
2017-04-06 21:01:29 +02:00
if ( ! find_blockchain_supplement ( qblock_ids , start_height ) )
2015-12-14 06:40:16 +01:00
{
return false ;
}
2014-10-07 01:46:25 +02:00
2019-04-05 11:28:30 +02:00
db_rtxn_guard rtxn_guard ( m_db ) ;
2017-04-06 21:01:29 +02:00
current_height = get_current_blockchain_height ( ) ;
2019-04-15 14:29:47 +02:00
uint64_t stop_height = current_height ;
if ( clip_pruned )
{
const uint32_t pruning_seed = get_blockchain_pruning_seed ( ) ;
start_height = tools : : get_next_unpruned_block_height ( start_height , current_height , pruning_seed ) ;
stop_height = tools : : get_next_pruned_block_height ( start_height , current_height , pruning_seed ) ;
}
2015-12-14 06:40:16 +01:00
size_t count = 0 ;
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
hashes . reserve ( std : : min ( ( size_t ) ( stop_height - start_height ) , ( size_t ) BLOCKS_IDS_SYNCHRONIZING_DEFAULT_COUNT ) ) ;
for ( size_t i = start_height ; i < stop_height & & count < BLOCKS_IDS_SYNCHRONIZING_DEFAULT_COUNT ; i + + , count + + )
2015-12-14 06:40:16 +01:00
{
2017-04-06 21:01:29 +02:00
hashes . push_back ( m_db - > get_block_hash_from_height ( i ) ) ;
2015-12-14 06:40:16 +01:00
}
2017-04-06 21:01:29 +02:00
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
2017-04-06 21:01:29 +02:00
bool Blockchain : : find_blockchain_supplement ( const std : : list < crypto : : hash > & qblock_ids , NOTIFY_RESPONSE_CHAIN_ENTRY : : request & resp ) const
{
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2017-04-06 21:01:29 +02:00
2019-04-15 14:29:47 +02:00
bool result = find_blockchain_supplement ( qblock_ids , resp . m_block_ids , resp . start_height , resp . total_height , true ) ;
2018-06-29 16:49:49 +02:00
if ( result )
resp . cumulative_difficulty = m_db - > get_block_cumulative_difficulty ( resp . total_height - 1 ) ;
2017-04-06 21:01:29 +02:00
return result ;
}
2014-10-07 01:46:25 +02:00
//------------------------------------------------------------------
//FIXME: change argument to std::vector, low priority
// find split point between ours and foreign blockchain (or start at
// blockchain height <req_start_block>), and return up to max_count FULL
// blocks by reference.
2018-04-16 21:16:00 +02:00
bool Blockchain : : find_blockchain_supplement ( const uint64_t req_start_block , const std : : list < crypto : : hash > & qblock_ids , std : : vector < std : : pair < std : : pair < cryptonote : : blobdata , crypto : : hash > , std : : vector < std : : pair < crypto : : hash , cryptonote : : blobdata > > > > & blocks , uint64_t & total_height , uint64_t & start_height , bool pruned , bool get_miner_tx_hash , size_t max_count ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
// if a specific start height has been requested
if ( req_start_block > 0 )
{
// if requested height is higher than our chain, return false -- we can't help
if ( req_start_block > = m_db - > height ( ) )
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
return false ;
2014-10-07 01:46:25 +02:00
}
2015-12-14 06:40:16 +01:00
start_height = req_start_block ;
}
else
{
if ( ! find_blockchain_supplement ( qblock_ids , start_height ) )
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
return false ;
2014-10-07 01:46:25 +02:00
}
2015-12-14 06:40:16 +01:00
}
2014-10-07 01:46:25 +02:00
2019-04-05 11:28:30 +02:00
db_rtxn_guard rtxn_guard ( m_db ) ;
2015-12-14 06:40:16 +01:00
total_height = get_current_blockchain_height ( ) ;
2017-08-25 22:04:55 +02:00
size_t count = 0 , size = 0 ;
2018-04-16 01:16:02 +02:00
blocks . reserve ( std : : min ( std : : min ( max_count , ( size_t ) 10000 ) , ( size_t ) ( total_height - start_height ) ) ) ;
2018-08-09 18:44:26 +02:00
for ( uint64_t i = start_height ; i < total_height & & count < max_count & & ( size < FIND_BLOCKCHAIN_SUPPLEMENT_MAX_SIZE | | count < 3 ) ; i + + , count + + )
2015-12-14 06:40:16 +01:00
{
blocks . resize ( blocks . size ( ) + 1 ) ;
2018-04-16 21:16:00 +02:00
blocks . back ( ) . first . first = m_db - > get_block_blob_from_height ( i ) ;
2017-01-15 17:05:55 +01:00
block b ;
2018-04-16 21:16:00 +02:00
CHECK_AND_ASSERT_MES ( parse_and_validate_block_from_blob ( blocks . back ( ) . first . first , b ) , false , " internal error, invalid block " ) ;
blocks . back ( ) . first . second = get_miner_tx_hash ? cryptonote : : get_transaction_hash ( b . miner_tx ) : crypto : : null_hash ;
std : : vector < cryptonote : : blobdata > txs ;
2019-11-12 19:40:37 +01:00
if ( pruned )
{
CHECK_AND_ASSERT_MES ( m_db - > get_pruned_tx_blobs_from ( b . tx_hashes . front ( ) , b . tx_hashes . size ( ) , txs ) , false , " Failed to retrieve all transactions needed " ) ;
}
else
{
std : : vector < crypto : : hash > mis ;
get_transactions_blobs ( b . tx_hashes , txs , mis , pruned ) ;
CHECK_AND_ASSERT_MES ( ! mis . size ( ) , false , " internal error, transaction from block not found " ) ;
}
2018-04-16 21:16:00 +02:00
size + = blocks . back ( ) . first . first . size ( ) ;
for ( const auto & t : txs )
2017-08-25 22:04:55 +02:00
size + = t . size ( ) ;
2018-04-16 21:16:00 +02:00
CHECK_AND_ASSERT_MES ( txs . size ( ) = = b . tx_hashes . size ( ) , false , " mismatched sizes of b.tx_hashes and txs " ) ;
blocks . back ( ) . second . reserve ( txs . size ( ) ) ;
for ( size_t i = 0 ; i < txs . size ( ) ; + + i )
{
blocks . back ( ) . second . push_back ( std : : make_pair ( b . tx_hashes [ i ] , std : : move ( txs [ i ] ) ) ) ;
}
2015-12-14 06:40:16 +01:00
}
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2019-09-23 03:09:19 +02:00
bool Blockchain : : add_block_as_invalid ( cryptonote : : block const & block )
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2019-09-23 03:09:19 +02:00
auto i_res = m_invalid_blocks . insert ( get_block_hash ( block ) ) ;
CHECK_AND_ASSERT_MES ( i_res . second , false , " at insertion invalid block returned status failed " ) ;
MINFO ( " BLOCK ADDED AS INVALID: " < < ( * i_res . first ) < < std : : endl < < " , prev_id= " < < block . prev_id < < " , m_invalid_blocks count= " < < m_invalid_blocks . size ( ) ) ;
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2019-12-02 19:51:28 +01:00
void Blockchain : : flush_invalid_blocks ( )
{
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
Purge epee::critical_crap and CRITICAL_CRAP
This purges epee::critical_region/epee::critical_section and the awful
CRITICAL_REGION_LOCAL and CRITICAL_REGION_LOCAL1 and
CRITICAL_REGION_BEGIN1 and all that crap from epee code.
This wrapper class around a mutex is just painful, macro-infested
indirection that accomplishes nothing (and, worse, forces all using code
to use a std::recursive_mutex even when a different mutex type is more
appropriate).
This commit purges it, replacing the "critical_section" mutex wrappers
with either std::mutex, std::recursive_mutex, or std::shared_mutex as
appropriate. I kept anything that looked uncertain as a
recursive_mutex, simple cases that obviously don't recurse as
std::mutex, and simple cases with reader/writing mechanics as a
shared_mutex.
Ideally all the recursive_mutexes should be eliminated because a
recursive_mutex is almost always a design flaw where someone has let the
locking code get impossibly tangled, but that requires a lot more time
to properly trace down all the ways the mutexes are used.
Other notable changes:
- There was one NIH promise/future-like class here that was used in
example one place in p2p/net_node; I replaced it with a
std::promise/future.
- moved the mutex for LMDB resizing into LMDB itself; having it in the
abstract base class is bad design, and also made it impossible to make a
moveable base class (which gets used for the fake db classes in the test
code).
2020-06-22 21:40:31 +02:00
std : : unique_lock lock { * this } ;
2019-12-02 19:51:28 +01:00
m_invalid_blocks . clear ( ) ;
}
//------------------------------------------------------------------
2014-12-06 23:40:33 +01:00
bool Blockchain : : have_block ( const crypto : : hash & id ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
if ( m_db - > block_exists ( id ) )
{
2018-04-23 12:43:12 +02:00
LOG_PRINT_L2 ( " block " < < id < < " found in main chain " ) ;
2015-12-14 06:40:16 +01:00
return true ;
}
2014-10-07 01:46:25 +02:00
2019-09-10 09:52:52 +02:00
if ( m_db - > get_alt_block ( id , NULL , NULL , NULL ) )
2015-12-14 06:40:16 +01:00
{
2019-05-08 13:11:23 +02:00
LOG_PRINT_L2 ( " block " < < id < < " found in alternative chains " ) ;
2015-12-14 06:40:16 +01:00
return true ;
}
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
if ( m_invalid_blocks . count ( id ) )
{
2018-04-23 12:43:12 +02:00
LOG_PRINT_L2 ( " block " < < id < < " found in m_invalid_blocks " ) ;
2015-12-14 06:40:16 +01:00
return true ;
}
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
return false ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2014-12-06 23:40:33 +01:00
size_t Blockchain : : get_total_transactions ( ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2017-10-29 14:06:45 +01:00
// WARNING: this function does not take m_blockchain_lock, and thus should only call read only
// m_db functions which do not depend on one another (ie, no getheight + gethash(height-1), as
// well as not accessing class members, even read only (ie, m_invalid_blocks). The caller must
// lock if it is otherwise needed.
2015-12-14 06:40:16 +01:00
return m_db - > get_tx_count ( ) ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
// This function checks each input in the transaction <tx> to make sure it
// has not been used already, and adds its key to the container <keys_this_block>.
//
// This container should be managed by the code that validates blocks so we don't
// have to store the used keys in a given block in the permanent storage only to
// remove them later if the block fails validation.
2014-12-06 23:40:33 +01:00
bool Blockchain : : check_for_double_spend ( const transaction & tx , key_images_container & keys_this_block ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2020-06-02 05:47:20 +02:00
auto add_transaction_input_visitor = [ & keys_this_block , this ] ( const auto & in ) {
using T = std : : decay_t < decltype ( in ) > ;
if constexpr ( std : : is_same_v < T , txin_to_key > )
2015-12-14 06:40:16 +01:00
{
// attempt to insert the newly-spent key into the container of
// keys spent this block. If this fails, the key was spent already
// in this block, return false to flag that a double spend was detected.
//
// if the insert into the block-wide spent keys container succeeds,
// check the blockchain-wide spent keys container and make sure the
// key wasn't used in another block already.
2020-06-02 05:47:20 +02:00
auto r = keys_this_block . insert ( in . k_image ) ;
return r . second & & ! m_db - > has_key_image ( in . k_image ) ;
2015-12-14 06:40:16 +01:00
}
2020-06-02 05:47:20 +02:00
else if constexpr ( std : : is_same_v < T , txin_gen > )
2015-12-14 06:40:16 +01:00
return true ;
2020-06-02 05:47:20 +02:00
else // txin_to_script*
2015-12-14 06:40:16 +01:00
return false ;
} ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
for ( const txin_v & in : tx . vin )
{
2020-06-02 05:47:20 +02:00
if ( ! std : : visit ( add_transaction_input_visitor , in ) )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_ERROR ( " Double spend detected! " ) ;
return false ;
2014-10-07 01:46:25 +02:00
}
2015-12-14 06:40:16 +01:00
}
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2018-12-16 14:28:49 +01:00
bool Blockchain : : get_tx_outputs_gindexs ( const crypto : : hash & tx_id , size_t n_txes , std : : vector < std : : vector < uint64_t > > & indexs ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2016-03-04 19:59:20 +01:00
uint64_t tx_index ;
if ( ! m_db - > tx_exists ( tx_id , tx_index ) )
2015-12-14 06:40:16 +01:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " get_tx_outputs_gindexs failed to find transaction with id = " < < tx_id ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
2018-12-16 14:28:49 +01:00
indexs = m_db - > get_tx_amount_output_indices ( tx_index , n_txes ) ;
CHECK_AND_ASSERT_MES ( n_txes = = indexs . size ( ) , false , " Wrong indexs size " ) ;
2014-10-07 01:46:25 +02:00
2018-12-16 14:28:49 +01:00
return true ;
}
//------------------------------------------------------------------
bool Blockchain : : get_tx_outputs_gindexs ( const crypto : : hash & tx_id , std : : vector < uint64_t > & indexs ) const
{
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2018-12-16 14:28:49 +01:00
uint64_t tx_index ;
if ( ! m_db - > tx_exists ( tx_id , tx_index ) )
2016-08-29 10:09:48 +02:00
{
2018-12-16 14:28:49 +01:00
MERROR_VER ( " get_tx_outputs_gindexs failed to find transaction with id = " < < tx_id ) ;
return false ;
2016-08-29 10:09:48 +02:00
}
2018-12-16 14:28:49 +01:00
std : : vector < std : : vector < uint64_t > > indices = m_db - > get_tx_amount_output_indices ( tx_index , 1 ) ;
CHECK_AND_ASSERT_MES ( indices . size ( ) = = 1 , false , " Wrong indices size " ) ;
indexs = indices . front ( ) ;
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2017-09-29 22:34:10 +02:00
void Blockchain : : on_new_tx_from_block ( const cryptonote : : transaction & tx )
{
# if defined(PER_BLOCK_CHECKPOINT)
// check if we're doing per-block checkpointing
if ( m_db - > height ( ) < m_blocks_hash_check . size ( ) )
{
TIME_MEASURE_START ( a ) ;
m_blocks_txs_check . push_back ( get_transaction_hash ( tx ) ) ;
TIME_MEASURE_FINISH ( a ) ;
if ( m_show_time_stats )
{
2020-06-02 05:47:20 +02:00
size_t ring_size = 0 ;
if ( ! tx . vin . empty ( ) & & std : : holds_alternative < txin_to_key > ( tx . vin [ 0 ] ) )
ring_size = std : : get < txin_to_key > ( tx . vin [ 0 ] ) . key_offsets . size ( ) ;
2017-09-29 22:34:10 +02:00
MINFO ( " HASH: " < < " - " < < " I/M/O: " < < tx . vin . size ( ) < < " / " < < ring_size < < " / " < < tx . vout . size ( ) < < " H: " < < 0 < < " chcktx: " < < a ) ;
}
}
# endif
}
//------------------------------------------------------------------
2016-03-25 07:22:06 +01:00
//FIXME: it seems this function is meant to be merely a wrapper around
// another function of the same name, this one adding one bit of
// functionality. Should probably move anything more than that
// (getting the hash of the block at height max_used_block_id)
// to the other function to keep everything in one place.
2014-10-07 01:46:25 +02:00
// This function overloads its sister function with
// an extra value (hash of highest block that holds an output used as input)
// as a return-by-reference.
2019-12-26 07:38:00 +01:00
bool Blockchain : : check_tx_inputs ( transaction & tx , uint64_t & max_used_block_height , crypto : : hash & max_used_block_id , tx_verification_context & tvc , bool kept_by_block , std : : unordered_set < crypto : : key_image > * key_image_conflicts )
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
# if defined(PER_BLOCK_CHECKPOINT)
2015-12-14 06:40:16 +01:00
// check if we're doing per-block checkpointing
if ( m_db - > height ( ) < m_blocks_hash_check . size ( ) & & kept_by_block )
{
max_used_block_id = null_hash ;
max_used_block_height = 0 ;
return true ;
}
# endif
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
TIME_MEASURE_START ( a ) ;
2019-12-26 07:38:00 +01:00
bool res = check_tx_inputs ( tx , tvc , & max_used_block_height , key_image_conflicts ) ;
2015-12-14 06:40:16 +01:00
TIME_MEASURE_FINISH ( a ) ;
if ( m_show_time_stats )
2016-12-22 02:20:49 +01:00
{
2020-06-02 05:47:20 +02:00
size_t ring_size = 0 ;
if ( ! tx . vin . empty ( ) & & std : : holds_alternative < txin_to_key > ( tx . vin [ 0 ] ) )
ring_size = std : : get < txin_to_key > ( tx . vin [ 0 ] ) . key_offsets . size ( ) ;
MINFO ( " HASH: " < < get_transaction_hash ( tx ) < < " I/M/O: " < < tx . vin . size ( ) < < " / " < < ring_size < < " / " < < tx . vout . size ( ) < <
" H: " < < max_used_block_height < < " ms: " < < a + m_fake_scan_time < < " B: " < < get_object_blobsize ( tx ) < < " W: " < < get_transaction_weight ( tx ) ) ;
2016-12-22 02:20:49 +01:00
}
2015-12-14 06:40:16 +01:00
if ( ! res )
return false ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2020-06-02 05:47:20 +02:00
CHECK_AND_ASSERT_MES ( max_used_block_height < m_db - > height ( ) , false ,
" internal error: max used block index= " < < max_used_block_height < < " is not less then blockchain size = " < < m_db - > height ( ) ) ;
2015-12-14 06:40:16 +01:00
max_used_block_id = m_db - > get_block_hash_from_height ( max_used_block_height ) ;
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2019-07-02 17:18:53 +02:00
bool Blockchain : : check_tx_outputs ( const transaction & tx , tx_verification_context & tvc ) const
2015-10-06 17:22:19 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2015-10-06 17:22:19 +02:00
2019-01-10 00:35:54 +01:00
for ( const auto & o : tx . vout ) {
if ( o . amount ! = 0 ) { // in a v2 tx, all outputs must have 0 amount NOTE(loki): All loki tx's are atleast v2 from the beginning
tvc . m_invalid_output = true ;
return false ;
2015-10-06 17:22:19 +02:00
}
2019-01-10 00:35:54 +01:00
// from hardfork v4, forbid invalid pubkeys NOTE(loki): We started from hf7 so always execute branch
2020-06-02 05:47:20 +02:00
if ( auto * out_to_key = std : : get_if < txout_to_key > ( & o . target ) ) {
if ( ! crypto : : check_key ( out_to_key - > key ) ) {
2019-01-10 00:35:54 +01:00
tvc . m_invalid_output = true ;
return false ;
2016-11-28 23:32:13 +01:00
}
}
}
2018-08-20 01:06:10 +02:00
// from v10, allow bulletproofs
2019-01-10 00:35:54 +01:00
const uint8_t hf_version = m_hardfork - > get_current_version ( ) ;
if ( hf_version < network_version_10_bulletproofs ) {
2018-03-30 21:29:42 +02:00
const bool bulletproof = rct : : is_rct_bulletproof ( tx . rct_signatures . type ) ;
2018-03-16 16:00:59 +01:00
if ( bulletproof | | ! tx . rct_signatures . p . bulletproofs . empty ( ) )
2017-12-02 22:17:42 +01:00
{
2018-10-22 06:43:00 +02:00
MERROR_VER ( " Bulletproofs are not allowed before v10 " ) ;
2017-12-02 22:17:42 +01:00
tvc . m_invalid_output = true ;
return false ;
}
}
2018-10-09 03:31:08 +02:00
else
{
const bool borromean = rct : : is_rct_borromean ( tx . rct_signatures . type ) ;
if ( borromean )
{
2018-12-15 11:19:45 +01:00
uint64_t hf10_height = m_hardfork - > get_earliest_ideal_height_for_version ( network_version_10_bulletproofs ) ;
uint64_t curr_height = this - > get_current_blockchain_height ( ) ;
if ( curr_height = = hf10_height )
{
// NOTE(loki): Allow the hardforking block to contain a borromean proof
// incase there were some transactions in the TX Pool that were
// generated pre-HF10 rules. Note, this isn't bulletproof. If there were
// more than 1 blocks worth of borromean proof TX's sitting in the pool
// this isn't going to work.
}
else
{
MERROR_VER ( " Borromean range proofs are not allowed after v10 " ) ;
tvc . m_invalid_output = true ;
return false ;
}
2017-12-02 22:17:42 +01:00
}
}
2019-01-06 14:47:16 +01:00
if ( hf_version < HF_VERSION_SMALLER_BP ) {
2019-01-30 04:44:00 +01:00
if ( tx . rct_signatures . type = = rct : : RCTTypeBulletproof2 )
{
2019-04-10 01:36:50 +02:00
MERROR_VER ( " Ringct type " < < ( unsigned ) rct : : RCTTypeBulletproof2 < < " is not allowed before v " < < HF_VERSION_SMALLER_BP ) ;
2019-01-30 04:44:00 +01:00
tvc . m_invalid_output = true ;
return false ;
2019-01-06 14:47:16 +01:00
}
}
2019-02-15 11:20:23 +01:00
if ( hf_version > HF_VERSION_SMALLER_BP ) {
2019-11-29 04:36:43 +01:00
if ( tx . version > = txversion : : v4_tx_types & & tx . is_transfer ( ) )
{
2019-02-15 11:20:23 +01:00
if ( tx . rct_signatures . type = = rct : : RCTTypeBulletproof )
{
MERROR_VER ( " Ringct type " < < ( unsigned ) rct : : RCTTypeBulletproof < < " is not allowed from v " < < ( HF_VERSION_SMALLER_BP + 1 ) ) ;
2019-01-06 14:47:16 +01:00
tvc . m_invalid_output = true ;
return false ;
}
}
}
2015-12-14 06:40:16 +01:00
return true ;
2015-10-06 17:22:19 +02:00
}
//------------------------------------------------------------------
2014-12-06 23:40:33 +01:00
bool Blockchain : : have_tx_keyimges_as_spent ( const transaction & tx ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2015-10-08 04:28:11 +02:00
for ( const txin_v & in : tx . vin )
2015-12-14 06:40:16 +01:00
{
2020-06-02 05:47:20 +02:00
CHECKED_GET_SPECIFIC_VARIANT ( in , txin_to_key , in_to_key , true ) ;
2015-12-14 06:40:16 +01:00
if ( have_tx_keyimg_as_spent ( in_to_key . k_image ) )
return true ;
}
return false ;
2014-10-07 01:46:25 +02:00
}
2019-07-02 17:18:53 +02:00
bool Blockchain : : expand_transaction_2 ( transaction & tx , const crypto : : hash & tx_prefix_hash , const std : : vector < std : : vector < rct : : ctkey > > & pubkeys ) const
2016-08-09 12:38:54 +02:00
{
2016-10-10 21:47:52 +02:00
PERF_TIMER ( expand_transaction_2 ) ;
2019-06-11 20:53:46 +02:00
CHECK_AND_ASSERT_MES ( tx . version > = txversion : : v2_ringct , false , " Transaction version is not 2 or greater " ) ;
2016-08-09 12:38:54 +02:00
rct : : rctSig & rv = tx . rct_signatures ;
// message - hash of the transaction prefix
rv . message = rct : : hash2rct ( tx_prefix_hash ) ;
// mixRing - full and simple store it in opposite ways
2018-03-30 21:29:42 +02:00
if ( rv . type = = rct : : RCTTypeFull )
2016-08-09 12:38:54 +02:00
{
2017-12-12 12:08:11 +01:00
CHECK_AND_ASSERT_MES ( ! pubkeys . empty ( ) & & ! pubkeys [ 0 ] . empty ( ) , false , " empty pubkeys " ) ;
2016-08-09 12:38:54 +02:00
rv . mixRing . resize ( pubkeys [ 0 ] . size ( ) ) ;
for ( size_t m = 0 ; m < pubkeys [ 0 ] . size ( ) ; + + m )
rv . mixRing [ m ] . clear ( ) ;
for ( size_t n = 0 ; n < pubkeys . size ( ) ; + + n )
{
CHECK_AND_ASSERT_MES ( pubkeys [ n ] . size ( ) < = pubkeys [ 0 ] . size ( ) , false , " More inputs that first ring " ) ;
for ( size_t m = 0 ; m < pubkeys [ n ] . size ( ) ; + + m )
{
rv . mixRing [ m ] . push_back ( pubkeys [ n ] [ m ] ) ;
}
}
}
2019-01-06 14:47:16 +01:00
else if ( rv . type = = rct : : RCTTypeSimple | | rv . type = = rct : : RCTTypeBulletproof | | rv . type = = rct : : RCTTypeBulletproof2 )
2016-08-09 12:38:54 +02:00
{
2017-12-12 12:08:11 +01:00
CHECK_AND_ASSERT_MES ( ! pubkeys . empty ( ) & & ! pubkeys [ 0 ] . empty ( ) , false , " empty pubkeys " ) ;
2016-08-09 12:38:54 +02:00
rv . mixRing . resize ( pubkeys . size ( ) ) ;
for ( size_t n = 0 ; n < pubkeys . size ( ) ; + + n )
{
rv . mixRing [ n ] . clear ( ) ;
for ( size_t m = 0 ; m < pubkeys [ n ] . size ( ) ; + + m )
{
rv . mixRing [ n ] . push_back ( pubkeys [ n ] [ m ] ) ;
}
}
}
else
{
CHECK_AND_ASSERT_MES ( false , false , " Unsupported rct tx type: " + boost : : lexical_cast < std : : string > ( rv . type ) ) ;
}
// II
2018-03-30 21:29:42 +02:00
if ( rv . type = = rct : : RCTTypeFull )
2016-08-09 12:38:54 +02:00
{
2016-08-09 22:34:09 +02:00
rv . p . MGs . resize ( 1 ) ;
rv . p . MGs [ 0 ] . II . resize ( tx . vin . size ( ) ) ;
2016-08-09 12:38:54 +02:00
for ( size_t n = 0 ; n < tx . vin . size ( ) ; + + n )
2020-06-02 05:47:20 +02:00
rv . p . MGs [ 0 ] . II [ n ] = rct : : ki2rct ( std : : get < txin_to_key > ( tx . vin [ n ] ) . k_image ) ;
2016-08-09 12:38:54 +02:00
}
2019-01-30 03:05:20 +01:00
else if ( rv . type = = rct : : RCTTypeSimple | | rv . type = = rct : : RCTTypeBulletproof | | rv . type = = rct : : RCTTypeBulletproof2 )
2016-08-09 12:38:54 +02:00
{
2016-08-09 22:34:09 +02:00
CHECK_AND_ASSERT_MES ( rv . p . MGs . size ( ) = = tx . vin . size ( ) , false , " Bad MGs size " ) ;
2016-08-09 12:38:54 +02:00
for ( size_t n = 0 ; n < tx . vin . size ( ) ; + + n )
{
2016-08-09 22:34:09 +02:00
rv . p . MGs [ n ] . II . resize ( 1 ) ;
2020-06-02 05:47:20 +02:00
rv . p . MGs [ n ] . II [ 0 ] = rct : : ki2rct ( std : : get < txin_to_key > ( tx . vin [ n ] ) . k_image ) ;
2016-08-09 12:38:54 +02:00
}
}
else
{
CHECK_AND_ASSERT_MES ( false , false , " Unsupported rct tx type: " + boost : : lexical_cast < std : : string > ( rv . type ) ) ;
}
2017-01-14 14:29:08 +01:00
// outPk was already done by handle_incoming_tx
2016-08-09 12:38:54 +02:00
return true ;
}
2014-10-07 01:46:25 +02:00
//------------------------------------------------------------------
2015-12-25 23:11:21 +01:00
// This function validates transaction inputs and their keys.
2016-03-25 07:22:06 +01:00
// FIXME: consider moving functionality specific to one input into
// check_tx_input() rather than here, and use this function simply
// to iterate the inputs as necessary (splitting the task
// using threads, etc.)
2019-12-26 07:38:00 +01:00
bool Blockchain : : check_tx_inputs ( transaction & tx , tx_verification_context & tvc , uint64_t * pmax_used_block_height , std : : unordered_set < crypto : : key_image > * key_image_conflicts )
2014-10-07 01:46:25 +02:00
{
2016-10-10 21:47:52 +02:00
PERF_TIMER ( check_tx_inputs ) ;
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2020-05-22 03:36:34 +02:00
uint64_t max_used_block_height = 0 ;
if ( ! pmax_used_block_height )
pmax_used_block_height = & max_used_block_height ;
* pmax_used_block_height = 0 ;
2014-10-07 01:46:25 +02:00
Relax deregistration rules
The replaces the deregistration mechanism with a new state change
mechanism (beginning at the v12 fork) which can change a service node's
network status via three potential values (and is extensible in the
future to handle more):
- deregistered -- this is the same as the existing deregistration; the
SN is instantly removed from the SN list.
- decommissioned -- this is a sort of temporary deregistration: your SN
remains in the service node list, but is removed from the rewards list
and from any network duties.
- recommissioned -- this tx is sent by a quorum if they observe a
decommissioned SN sending uptime proofs again. Upon reception, the SN
is reactivated and put on the end of the reward list.
Since this is broadening the quorum use, this also renames the relevant
quorum to a "obligations" quorum (since it validates SN obligations),
while the transactions are "state_change" transactions (since they
change the state of a registered SN).
The new parameters added to service_node_rules.h control how this works:
// Service node decommissioning: as service nodes stay up they earn "credits" (measured in blocks)
// towards a future outage. A new service node starts out with INITIAL_CREDIT, and then builds up
// CREDIT_PER_DAY for each day the service node remains active up to a maximum of
// DECOMMISSION_MAX_CREDIT.
//
// If a service node stops sending uptime proofs, a quorum will consider whether the service node
// has built up enough credits (at least MINIMUM): if so, instead of submitting a deregistration,
// it instead submits a decommission. This removes the service node from the list of active
// service nodes both for rewards and for any active network duties. If the service node comes
// back online (i.e. starts sending the required performance proofs again) before the credits run
// out then a quorum will reinstate the service node using a recommission transaction, which adds
// the service node back to the bottom of the service node reward list, and resets its accumulated
// credits to 0. If it does not come back online within the required number of blocks (i.e. the
// accumulated credit at the point of decommissioning) then a quorum will send a permanent
// deregistration transaction to the network, starting a 30-day deregistration count down.
This commit currently includes values (which are not necessarily
finalized):
- 8 hours (240 blocks) of credit required for activation of a
decommission (rather than a deregister)
- 0 initial credits at registration
- a maximum of 24 hours (720 blocks) of credits
- credits accumulate at a rate that you hit 24 hours of credits after 30
days of operation.
Miscellaneous other details of this PR:
- a new TX extra tag is used for the state change (including
deregistrations). The old extra tag has no version or type tag, so
couldn't be reused. The data in the new tag is slightly more
efficiently packed than the old deregistration transaction, so it gets
used for deregistrations (starting at the v12 fork) as well.
- Correct validator/worker selection required generalizing the shuffle
function to be able to shuffle just part of a vector. This lets us
stick any down service nodes at the end of the potential list, then
select validators by only shuffling the part of the index vector that
contains active service indices. Once the validators are selected, the
remainder of the list (this time including decommissioned SN indices) is
shuffled to select quorum workers to check, thus allowing decommisioned
nodes to be randomly included in the nodes to check without being
selected as a validator.
- Swarm recalculation was not quite right: swarms were recalculated on
SN registrations, even if those registrations were include shared node
registrations, but *not* recalculated on stakes. Starting with the
upgrade this behaviour is fixed (swarms aren't actually used currently
and aren't consensus-relevant so recalculating early won't hurt
anything).
- Details on decomm/dereg are added to RPC info and print_sn/print_sn_status
- Slightly improves the % of reward output in the print_sn output by
rounding it to two digits, and reserves space in the output string to
avoid excessive reallocations.
- Adds various debugging at higher debug levels to quorum voting (into
all of voting itself, vote transmission, and vote reception).
- Reset service node list internal data structure version to 0. The SN
list has to be rescanned anyway at upgrade (its size has changed), so we
might as well reset the version and remove the version-dependent
serialization code. (Note that the affected code here is for SN states
in lmdb storage, not for SN-to-SN communication serialization).
2019-06-18 23:57:02 +02:00
const auto hf_version = m_hardfork - > get_current_version ( ) ;
2018-08-03 02:52:01 +02:00
2019-01-25 04:15:52 +01:00
// Min/Max Type/Version Check
2015-12-14 06:40:16 +01:00
{
2019-11-29 04:36:43 +01:00
txtype max_type = transaction : : get_max_type_for_hf ( hf_version ) ;
txversion min_version = transaction : : get_min_version_for_hf ( hf_version ) ;
txversion max_version = transaction : : get_max_version_for_hf ( hf_version ) ;
tvc . m_invalid_type = ( tx . type > max_type ) ;
2019-01-25 04:15:52 +01:00
tvc . m_invalid_version = tx . version < min_version | | tx . version > max_version ;
if ( tvc . m_invalid_version | | tvc . m_invalid_type )
2015-12-25 23:11:21 +01:00
{
2019-11-29 04:36:43 +01:00
if ( tvc . m_invalid_version ) MERROR_VER ( " TX Invalid version: " < < tx . version < < " for hardfork: " < < ( int ) hf_version < < " min/max version: " < < min_version < < " / " < < max_version ) ;
if ( tvc . m_invalid_type ) MERROR_VER ( " TX Invalid type: " < < tx . type < < " for hardfork: " < < ( int ) hf_version < < " max type: " < < max_type ) ;
2015-12-25 23:11:21 +01:00
return false ;
}
2019-01-10 00:35:54 +01:00
}
2019-01-25 04:15:52 +01:00
2019-11-29 04:36:43 +01:00
if ( tx . is_transfer ( ) )
2019-01-10 00:35:54 +01:00
{
2020-06-03 03:27:47 +02:00
if ( tx . type ! = txtype : : loki_name_system & & hf_version > = HF_VERSION_MIN_2_OUTPUTS & & tx . vout . size ( ) < 2 )
2020-05-06 06:20:23 +02:00
{
MERROR_VER ( " Tx " < < get_transaction_hash ( tx ) < < " has fewer than two outputs " ) ;
tvc . m_too_few_outputs = true ;
return false ;
}
2019-01-10 00:35:54 +01:00
crypto : : hash tx_prefix_hash = get_transaction_prefix_hash ( tx ) ;
2014-10-07 01:46:25 +02:00
2019-01-10 00:35:54 +01:00
std : : vector < std : : vector < rct : : ctkey > > pubkeys ( tx . vin . size ( ) ) ;
2019-01-25 04:15:52 +01:00
size_t sig_index = 0 ;
2019-01-10 00:35:54 +01:00
const crypto : : key_image * last_key_image = NULL ;
2019-01-25 04:15:52 +01:00
for ( size_t sig_index = 0 ; sig_index < tx . vin . size ( ) ; sig_index + + )
2015-12-14 06:40:16 +01:00
{
2019-01-10 00:35:54 +01:00
const auto & txin = tx . vin [ sig_index ] ;
2019-01-25 04:15:52 +01:00
//
// Monero Checks
//
// make sure output being spent is of type txin_to_key, rather than e.g. txin_gen, which is only used for miner transactions
2020-06-02 05:47:20 +02:00
CHECK_AND_ASSERT_MES ( std : : holds_alternative < txin_to_key > ( txin ) , false , " wrong type id in tx input at Blockchain::check_tx_inputs " ) ;
const txin_to_key & in_to_key = std : : get < txin_to_key > ( txin ) ;
2019-01-25 04:15:52 +01:00
{
// make sure tx output has key offset(s) (is signed to be used)
CHECK_AND_ASSERT_MES ( in_to_key . key_offsets . size ( ) , false , " empty in_to_key.key_offsets in transaction with id " < < get_transaction_hash ( tx ) ) ;
2019-01-10 00:35:54 +01:00
2019-01-25 04:15:52 +01:00
// Mixin Check, from hard fork 7, we require mixin at least 9, always.
if ( in_to_key . key_offsets . size ( ) - 1 ! = CRYPTONOTE_DEFAULT_TX_MIXIN )
{
MERROR_VER ( " Tx " < < get_transaction_hash ( tx ) < < " has incorrect ring size ( " < < in_to_key . key_offsets . size ( ) - 1 < < " , expected ( " < < CRYPTONOTE_DEFAULT_TX_MIXIN < < " ) " ) ;
tvc . m_low_mixin = true ;
return false ;
}
2019-01-10 00:35:54 +01:00
2019-01-25 04:15:52 +01:00
// from v7, sorted ins
{
if ( last_key_image & & memcmp ( & in_to_key . k_image , last_key_image , sizeof ( * last_key_image ) ) > = 0 )
{
MERROR_VER ( " transaction has unsorted inputs " ) ;
tvc . m_verifivation_failed = true ;
return false ;
}
last_key_image = & in_to_key . k_image ;
}
2019-01-10 00:35:54 +01:00
2019-01-25 04:15:52 +01:00
if ( have_tx_keyimg_as_spent ( in_to_key . k_image ) )
2015-12-14 06:40:16 +01:00
{
2019-01-25 04:15:52 +01:00
MERROR_VER ( " Key image already spent in blockchain: " < < epee : : string_tools : : pod_to_hex ( in_to_key . k_image ) ) ;
2019-12-26 07:38:00 +01:00
if ( key_image_conflicts )
key_image_conflicts - > insert ( in_to_key . k_image ) ;
else
{
tvc . m_double_spend = true ;
return false ;
}
2016-06-16 00:37:13 +02:00
}
2015-12-14 06:40:16 +01:00
2019-01-25 04:15:52 +01:00
// make sure that output being spent matches up correctly with the
// signature spending it.
2019-10-23 07:12:29 +02:00
if ( ! check_tx_input ( in_to_key , tx_prefix_hash , pubkeys [ sig_index ] , pmax_used_block_height ) )
2019-01-25 04:15:52 +01:00
{
MERROR_VER ( " Failed to check ring signature for tx " < < get_transaction_hash ( tx ) < < " vin key with k_image: " < < in_to_key . k_image < < " sig_index: " < < sig_index ) ;
if ( pmax_used_block_height ) // a default value of NULL is used when called from Blockchain::handle_block_to_main_chain()
{
MERROR_VER ( " *pmax_used_block_height: " < < * pmax_used_block_height ) ;
}
return false ;
}
2016-06-16 00:37:13 +02:00
}
2019-01-25 04:15:52 +01:00
//
// Service Node Checks
//
2019-02-25 08:05:20 +01:00
if ( hf_version > = cryptonote : : network_version_11_infinite_staking )
2016-06-16 00:37:13 +02:00
{
2019-08-11 05:46:59 +02:00
const auto & blacklist = m_service_node_list . get_blacklisted_key_images ( ) ;
2019-01-25 04:15:52 +01:00
for ( const auto & entry : blacklist )
2019-01-10 00:35:54 +01:00
{
2019-01-25 04:15:52 +01:00
if ( in_to_key . k_image = = entry . key_image ) // Check if key image is on the blacklist
{
MERROR_VER ( " Key image: " < < epee : : string_tools : : pod_to_hex ( entry . key_image ) < < " is blacklisted by the service node network " ) ;
tvc . m_key_image_blacklisted = true ;
return false ;
}
2019-01-10 00:35:54 +01:00
}
2019-01-25 04:15:52 +01:00
uint64_t unlock_height = 0 ;
if ( m_service_node_list . is_key_image_locked ( in_to_key . k_image , & unlock_height ) )
{
MERROR_VER ( " Key image: " < < epee : : string_tools : : pod_to_hex ( in_to_key . k_image ) < < " is locked in a stake until height: " < < unlock_height ) ;
tvc . m_key_image_locked_by_snode = true ;
return false ;
}
2016-06-16 00:37:13 +02:00
}
2015-12-14 06:40:16 +01:00
}
2019-01-10 00:35:54 +01:00
2020-05-22 03:36:34 +02:00
if ( hf_version > = HF_VERSION_ENFORCE_MIN_AGE )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2020-05-22 03:36:34 +02:00
CHECK_AND_ASSERT_MES ( * pmax_used_block_height + CRYPTONOTE_DEFAULT_TX_SPENDABLE_AGE < = m_db - > height ( ) ,
false , " Transaction spends at least one output which is too young " ) ;
2015-12-14 06:40:16 +01:00
}
2020-05-22 03:36:34 +02:00
2016-08-09 12:38:54 +02:00
if ( ! expand_transaction_2 ( tx , tx_prefix_hash , pubkeys ) )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to expand rct signatures! " ) ;
2016-08-09 12:38:54 +02:00
return false ;
}
2016-06-16 00:37:13 +02:00
// from version 2, check ringct signatures
2016-07-10 13:57:22 +02:00
// obviously, the original and simple rct APIs use a mixRing that's indexes
// in opposite orders, because it'd be too simple otherwise...
2016-08-09 12:38:54 +02:00
const rct : : rctSig & rv = tx . rct_signatures ;
switch ( rv . type )
2015-12-14 06:40:16 +01:00
{
2016-08-12 19:45:07 +02:00
case rct : : RCTTypeNull : {
// we only accept no signatures for coinbase txes
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Null rct signature on non-coinbase tx " ) ;
2016-08-12 19:45:07 +02:00
return false ;
}
2017-12-02 22:17:42 +01:00
case rct : : RCTTypeSimple :
2018-03-30 21:29:42 +02:00
case rct : : RCTTypeBulletproof :
2019-01-06 14:47:16 +01:00
case rct : : RCTTypeBulletproof2 :
2017-12-02 22:17:42 +01:00
{
2018-01-19 08:54:14 +01:00
// check all this, either reconstructed (so should really pass), or not
2016-06-29 19:18:18 +02:00
{
2016-08-09 12:38:54 +02:00
if ( pubkeys . size ( ) ! = rv . mixRing . size ( ) )
2016-06-16 00:37:13 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to check ringct signatures: mismatched pubkeys/mixRing size " ) ;
2016-07-10 13:57:22 +02:00
return false ;
}
for ( size_t i = 0 ; i < pubkeys . size ( ) ; + + i )
{
2016-08-09 12:38:54 +02:00
if ( pubkeys [ i ] . size ( ) ! = rv . mixRing [ i ] . size ( ) )
2016-06-29 19:18:18 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to check ringct signatures: mismatched pubkeys/mixRing size " ) ;
2016-06-29 19:18:18 +02:00
return false ;
}
2016-07-10 13:57:22 +02:00
}
for ( size_t n = 0 ; n < pubkeys . size ( ) ; + + n )
{
for ( size_t m = 0 ; m < pubkeys [ n ] . size ( ) ; + + m )
2016-06-29 19:18:18 +02:00
{
2016-08-09 12:38:54 +02:00
if ( pubkeys [ n ] [ m ] . dest ! = rct : : rct2pk ( rv . mixRing [ n ] [ m ] . dest ) )
2016-07-10 13:57:22 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to check ringct signatures: mismatched pubkey at vin " < < n < < " , index " < < m ) ;
2016-07-10 13:57:22 +02:00
return false ;
}
2016-08-09 12:38:54 +02:00
if ( pubkeys [ n ] [ m ] . mask ! = rct : : rct2pk ( rv . mixRing [ n ] [ m ] . mask ) )
2016-07-10 13:57:22 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to check ringct signatures: mismatched commitment at vin " < < n < < " , index " < < m ) ;
2016-07-10 13:57:22 +02:00
return false ;
}
2016-06-29 19:18:18 +02:00
}
2016-06-16 00:37:13 +02:00
}
}
2016-08-09 22:34:09 +02:00
if ( rv . p . MGs . size ( ) ! = tx . vin . size ( ) )
2016-07-10 13:57:22 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to check ringct signatures: mismatched MGs/vin sizes " ) ;
2016-07-10 13:57:22 +02:00
return false ;
}
for ( size_t n = 0 ; n < tx . vin . size ( ) ; + + n )
{
2020-06-02 05:47:20 +02:00
if ( rv . p . MGs [ n ] . II . empty ( ) | | memcmp ( & std : : get < txin_to_key > ( tx . vin [ n ] ) . k_image , & rv . p . MGs [ n ] . II [ 0 ] , 32 ) )
2016-07-10 13:57:22 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to check ringct signatures: mismatched key image " ) ;
2016-07-10 13:57:22 +02:00
return false ;
}
}
2018-02-03 15:36:29 +01:00
if ( ! rct : : verRctNonSemanticsSimple ( rv ) )
2016-07-10 13:57:22 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to check ringct signatures! " ) ;
2016-07-10 13:57:22 +02:00
return false ;
}
2016-08-08 14:49:42 +02:00
break ;
2016-06-29 19:18:18 +02:00
}
2017-12-02 22:17:42 +01:00
case rct : : RCTTypeFull :
{
2018-01-19 08:54:14 +01:00
// check all this, either reconstructed (so should really pass), or not
2016-07-10 13:57:22 +02:00
{
bool size_matches = true ;
for ( size_t i = 0 ; i < pubkeys . size ( ) ; + + i )
2016-08-09 12:38:54 +02:00
size_matches & = pubkeys [ i ] . size ( ) = = rv . mixRing . size ( ) ;
for ( size_t i = 0 ; i < rv . mixRing . size ( ) ; + + i )
size_matches & = pubkeys . size ( ) = = rv . mixRing [ i ] . size ( ) ;
2016-07-10 13:57:22 +02:00
if ( ! size_matches )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to check ringct signatures: mismatched pubkeys/mixRing size " ) ;
2016-07-10 13:57:22 +02:00
return false ;
}
for ( size_t n = 0 ; n < pubkeys . size ( ) ; + + n )
{
for ( size_t m = 0 ; m < pubkeys [ n ] . size ( ) ; + + m )
{
2016-08-09 12:38:54 +02:00
if ( pubkeys [ n ] [ m ] . dest ! = rct : : rct2pk ( rv . mixRing [ m ] [ n ] . dest ) )
2016-07-10 13:57:22 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to check ringct signatures: mismatched pubkey at vin " < < n < < " , index " < < m ) ;
2016-07-10 13:57:22 +02:00
return false ;
}
2016-08-09 12:38:54 +02:00
if ( pubkeys [ n ] [ m ] . mask ! = rct : : rct2pk ( rv . mixRing [ m ] [ n ] . mask ) )
2016-07-10 13:57:22 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to check ringct signatures: mismatched commitment at vin " < < n < < " , index " < < m ) ;
2016-07-10 13:57:22 +02:00
return false ;
}
}
}
}
2016-08-09 22:34:09 +02:00
if ( rv . p . MGs . size ( ) ! = 1 )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to check ringct signatures: Bad MGs size " ) ;
2016-08-09 22:34:09 +02:00
return false ;
}
2017-12-12 12:08:11 +01:00
if ( rv . p . MGs . empty ( ) | | rv . p . MGs [ 0 ] . II . size ( ) ! = tx . vin . size ( ) )
2016-06-29 19:18:18 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to check ringct signatures: mismatched II/vin sizes " ) ;
2016-06-29 19:18:18 +02:00
return false ;
}
2016-07-10 13:57:22 +02:00
for ( size_t n = 0 ; n < tx . vin . size ( ) ; + + n )
{
2020-06-02 05:47:20 +02:00
if ( memcmp ( & std : : get < txin_to_key > ( tx . vin [ n ] ) . k_image , & rv . p . MGs [ 0 ] . II [ n ] , 32 ) )
2016-07-10 13:57:22 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to check ringct signatures: mismatched II/vin sizes " ) ;
2016-07-10 13:57:22 +02:00
return false ;
}
}
2016-06-29 19:18:18 +02:00
2017-01-14 14:29:08 +01:00
if ( ! rct : : verRct ( rv , false ) )
2016-07-10 13:57:22 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to check ringct signatures! " ) ;
2016-07-10 13:57:22 +02:00
return false ;
}
2016-08-08 14:49:42 +02:00
break ;
}
default :
2019-11-29 04:36:43 +01:00
MERROR_VER ( __func__ < < " : Unsupported rct type: " < < rv . type ) ;
2016-08-08 14:49:42 +02:00
return false ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2018-01-17 22:50:03 +01:00
// for bulletproofs, check they're only multi-output after v8
2019-01-10 00:35:54 +01:00
if ( rct : : is_rct_bulletproof ( rv . type ) & & hf_version < network_version_10_bulletproofs )
Service Node Deregister Part 5 (#89)
* Retrieve quorum list from height, reviewed
* Setup data structures for de/register TX
* Submit and validate partial/full deregisters
* Add P2P relaying of partial deregistration votes
* Code review adjustments for deregistration part 1
- Fix check_tx_semantic
- Remove signature_pod as votes are now stored as blobs. Serialization
overrides don't intefere with crypto::signature anymore.
* deregistration_vote_pool - changed sign/verify interface and removed repeated code
* Misc review, fix sign/verify api, vote threshold
* Deregister/tx edge case handling for combinatoric votes
* core, service_node_list: separated address from service node pubkey
* Retrieve quorum list from height, reviewed
* Setup data structures for de/register TX
* Submit and validate partial/full deregisters
* Add P2P relaying of partial deregistration votes
* Code review adjustments for deregistration part 1
- Fix check_tx_semantic
- Remove signature_pod as votes are now stored as blobs. Serialization
overrides don't intefere with crypto::signature anymore.
* deregistration_vote_pool - changed sign/verify interface and removed repeated code
* Misc review, fix sign/verify api, vote threshold
* Deregister/tx edge case handling for combinatoric votes
* Store service node lists for the duration of deregister lifetimes
* Quorum min/max bug, sort node list, fix node to test list
* Change quorum to store acc pub address, fix oob bug
* Code review for expiring votes, acc keys to pub_key, improve err msgs
* Add early out for is_deregistration_tx and protect against quorum changes
* Remove debug code, fix segfault
* Remove irrelevant check for tx v3 in blockchain, fix >= height for pruning quorum states
Incorrect assumption that a transaction can be kept in the chain if it could
eventually become invalid, because if it were the chain would be split and
eventually these transaction would be dropped. But also that we should not
override the pre-existing logic which handles this case anyway.
2018-07-18 04:42:47 +02:00
{
2019-01-10 00:35:54 +01:00
for ( const rct : : Bulletproof & proof : rv . p . bulletproofs )
Service Node Deregister Part 5 (#89)
* Retrieve quorum list from height, reviewed
* Setup data structures for de/register TX
* Submit and validate partial/full deregisters
* Add P2P relaying of partial deregistration votes
* Code review adjustments for deregistration part 1
- Fix check_tx_semantic
- Remove signature_pod as votes are now stored as blobs. Serialization
overrides don't intefere with crypto::signature anymore.
* deregistration_vote_pool - changed sign/verify interface and removed repeated code
* Misc review, fix sign/verify api, vote threshold
* Deregister/tx edge case handling for combinatoric votes
* core, service_node_list: separated address from service node pubkey
* Retrieve quorum list from height, reviewed
* Setup data structures for de/register TX
* Submit and validate partial/full deregisters
* Add P2P relaying of partial deregistration votes
* Code review adjustments for deregistration part 1
- Fix check_tx_semantic
- Remove signature_pod as votes are now stored as blobs. Serialization
overrides don't intefere with crypto::signature anymore.
* deregistration_vote_pool - changed sign/verify interface and removed repeated code
* Misc review, fix sign/verify api, vote threshold
* Deregister/tx edge case handling for combinatoric votes
* Store service node lists for the duration of deregister lifetimes
* Quorum min/max bug, sort node list, fix node to test list
* Change quorum to store acc pub address, fix oob bug
* Code review for expiring votes, acc keys to pub_key, improve err msgs
* Add early out for is_deregistration_tx and protect against quorum changes
* Remove debug code, fix segfault
* Remove irrelevant check for tx v3 in blockchain, fix >= height for pruning quorum states
Incorrect assumption that a transaction can be kept in the chain if it could
eventually become invalid, because if it were the chain would be split and
eventually these transaction would be dropped. But also that we should not
override the pre-existing logic which handles this case anyway.
2018-07-18 04:42:47 +02:00
{
2019-01-10 00:35:54 +01:00
if ( proof . V . size ( ) > 1 )
Service Node Deregister Part 5 (#89)
* Retrieve quorum list from height, reviewed
* Setup data structures for de/register TX
* Submit and validate partial/full deregisters
* Add P2P relaying of partial deregistration votes
* Code review adjustments for deregistration part 1
- Fix check_tx_semantic
- Remove signature_pod as votes are now stored as blobs. Serialization
overrides don't intefere with crypto::signature anymore.
* deregistration_vote_pool - changed sign/verify interface and removed repeated code
* Misc review, fix sign/verify api, vote threshold
* Deregister/tx edge case handling for combinatoric votes
* core, service_node_list: separated address from service node pubkey
* Retrieve quorum list from height, reviewed
* Setup data structures for de/register TX
* Submit and validate partial/full deregisters
* Add P2P relaying of partial deregistration votes
* Code review adjustments for deregistration part 1
- Fix check_tx_semantic
- Remove signature_pod as votes are now stored as blobs. Serialization
overrides don't intefere with crypto::signature anymore.
* deregistration_vote_pool - changed sign/verify interface and removed repeated code
* Misc review, fix sign/verify api, vote threshold
* Deregister/tx edge case handling for combinatoric votes
* Store service node lists for the duration of deregister lifetimes
* Quorum min/max bug, sort node list, fix node to test list
* Change quorum to store acc pub address, fix oob bug
* Code review for expiring votes, acc keys to pub_key, improve err msgs
* Add early out for is_deregistration_tx and protect against quorum changes
* Remove debug code, fix segfault
* Remove irrelevant check for tx v3 in blockchain, fix >= height for pruning quorum states
Incorrect assumption that a transaction can be kept in the chain if it could
eventually become invalid, because if it were the chain would be split and
eventually these transaction would be dropped. But also that we should not
override the pre-existing logic which handles this case anyway.
2018-07-18 04:42:47 +02:00
{
2019-01-10 00:35:54 +01:00
MERROR_VER ( " Multi output bulletproofs are invalid before v10 " ) ;
Service Node Deregister Part 5 (#89)
* Retrieve quorum list from height, reviewed
* Setup data structures for de/register TX
* Submit and validate partial/full deregisters
* Add P2P relaying of partial deregistration votes
* Code review adjustments for deregistration part 1
- Fix check_tx_semantic
- Remove signature_pod as votes are now stored as blobs. Serialization
overrides don't intefere with crypto::signature anymore.
* deregistration_vote_pool - changed sign/verify interface and removed repeated code
* Misc review, fix sign/verify api, vote threshold
* Deregister/tx edge case handling for combinatoric votes
* core, service_node_list: separated address from service node pubkey
* Retrieve quorum list from height, reviewed
* Setup data structures for de/register TX
* Submit and validate partial/full deregisters
* Add P2P relaying of partial deregistration votes
* Code review adjustments for deregistration part 1
- Fix check_tx_semantic
- Remove signature_pod as votes are now stored as blobs. Serialization
overrides don't intefere with crypto::signature anymore.
* deregistration_vote_pool - changed sign/verify interface and removed repeated code
* Misc review, fix sign/verify api, vote threshold
* Deregister/tx edge case handling for combinatoric votes
* Store service node lists for the duration of deregister lifetimes
* Quorum min/max bug, sort node list, fix node to test list
* Change quorum to store acc pub address, fix oob bug
* Code review for expiring votes, acc keys to pub_key, improve err msgs
* Add early out for is_deregistration_tx and protect against quorum changes
* Remove debug code, fix segfault
* Remove irrelevant check for tx v3 in blockchain, fix >= height for pruning quorum states
Incorrect assumption that a transaction can be kept in the chain if it could
eventually become invalid, because if it were the chain would be split and
eventually these transaction would be dropped. But also that we should not
override the pre-existing logic which handles this case anyway.
2018-07-18 04:42:47 +02:00
return false ;
}
}
}
2019-11-01 01:58:48 +01:00
if ( tx . type = = txtype : : loki_name_system )
{
cryptonote : : tx_extra_loki_name_system data ;
2020-01-23 05:56:09 +01:00
std : : string fail_reason ;
2020-02-04 04:00:53 +01:00
if ( ! m_lns_db . validate_lns_tx ( hf_version , get_current_blockchain_height ( ) , tx , & data , & fail_reason ) )
2019-11-01 01:58:48 +01:00
{
2020-02-18 02:52:03 +01:00
MERROR_VER ( " Failed to validate LNS TX reason: " < < fail_reason ) ;
2020-03-04 23:39:11 +01:00
tvc . m_verbose_error = std : : move ( fail_reason ) ;
2019-11-01 01:58:48 +01:00
return false ;
}
}
Service Node Deregister Part 5 (#89)
* Retrieve quorum list from height, reviewed
* Setup data structures for de/register TX
* Submit and validate partial/full deregisters
* Add P2P relaying of partial deregistration votes
* Code review adjustments for deregistration part 1
- Fix check_tx_semantic
- Remove signature_pod as votes are now stored as blobs. Serialization
overrides don't intefere with crypto::signature anymore.
* deregistration_vote_pool - changed sign/verify interface and removed repeated code
* Misc review, fix sign/verify api, vote threshold
* Deregister/tx edge case handling for combinatoric votes
* core, service_node_list: separated address from service node pubkey
* Retrieve quorum list from height, reviewed
* Setup data structures for de/register TX
* Submit and validate partial/full deregisters
* Add P2P relaying of partial deregistration votes
* Code review adjustments for deregistration part 1
- Fix check_tx_semantic
- Remove signature_pod as votes are now stored as blobs. Serialization
overrides don't intefere with crypto::signature anymore.
* deregistration_vote_pool - changed sign/verify interface and removed repeated code
* Misc review, fix sign/verify api, vote threshold
* Deregister/tx edge case handling for combinatoric votes
* Store service node lists for the duration of deregister lifetimes
* Quorum min/max bug, sort node list, fix node to test list
* Change quorum to store acc pub address, fix oob bug
* Code review for expiring votes, acc keys to pub_key, improve err msgs
* Add early out for is_deregistration_tx and protect against quorum changes
* Remove debug code, fix segfault
* Remove irrelevant check for tx v3 in blockchain, fix >= height for pruning quorum states
Incorrect assumption that a transaction can be kept in the chain if it could
eventually become invalid, because if it were the chain would be split and
eventually these transaction would be dropped. But also that we should not
override the pre-existing logic which handles this case anyway.
2018-07-18 04:42:47 +02:00
}
2019-01-25 04:15:52 +01:00
else
{
2019-06-11 20:53:46 +02:00
CHECK_AND_ASSERT_MES ( tx . vin . size ( ) = = 0 , false , " TX type: " < < tx . type < < " should have 0 inputs. This should have been rejected in check_tx_semantic! " ) ;
2019-01-25 04:15:52 +01:00
if ( tx . rct_signatures . txnFee ! = 0 )
{
tvc . m_invalid_input = true ;
tvc . m_verifivation_failed = true ;
2019-06-11 20:53:46 +02:00
MERROR_VER ( " TX type: " < < tx . type < < " should have 0 fee! " ) ;
2019-01-25 04:15:52 +01:00
return false ;
}
Relax deregistration rules
The replaces the deregistration mechanism with a new state change
mechanism (beginning at the v12 fork) which can change a service node's
network status via three potential values (and is extensible in the
future to handle more):
- deregistered -- this is the same as the existing deregistration; the
SN is instantly removed from the SN list.
- decommissioned -- this is a sort of temporary deregistration: your SN
remains in the service node list, but is removed from the rewards list
and from any network duties.
- recommissioned -- this tx is sent by a quorum if they observe a
decommissioned SN sending uptime proofs again. Upon reception, the SN
is reactivated and put on the end of the reward list.
Since this is broadening the quorum use, this also renames the relevant
quorum to a "obligations" quorum (since it validates SN obligations),
while the transactions are "state_change" transactions (since they
change the state of a registered SN).
The new parameters added to service_node_rules.h control how this works:
// Service node decommissioning: as service nodes stay up they earn "credits" (measured in blocks)
// towards a future outage. A new service node starts out with INITIAL_CREDIT, and then builds up
// CREDIT_PER_DAY for each day the service node remains active up to a maximum of
// DECOMMISSION_MAX_CREDIT.
//
// If a service node stops sending uptime proofs, a quorum will consider whether the service node
// has built up enough credits (at least MINIMUM): if so, instead of submitting a deregistration,
// it instead submits a decommission. This removes the service node from the list of active
// service nodes both for rewards and for any active network duties. If the service node comes
// back online (i.e. starts sending the required performance proofs again) before the credits run
// out then a quorum will reinstate the service node using a recommission transaction, which adds
// the service node back to the bottom of the service node reward list, and resets its accumulated
// credits to 0. If it does not come back online within the required number of blocks (i.e. the
// accumulated credit at the point of decommissioning) then a quorum will send a permanent
// deregistration transaction to the network, starting a 30-day deregistration count down.
This commit currently includes values (which are not necessarily
finalized):
- 8 hours (240 blocks) of credit required for activation of a
decommission (rather than a deregister)
- 0 initial credits at registration
- a maximum of 24 hours (720 blocks) of credits
- credits accumulate at a rate that you hit 24 hours of credits after 30
days of operation.
Miscellaneous other details of this PR:
- a new TX extra tag is used for the state change (including
deregistrations). The old extra tag has no version or type tag, so
couldn't be reused. The data in the new tag is slightly more
efficiently packed than the old deregistration transaction, so it gets
used for deregistrations (starting at the v12 fork) as well.
- Correct validator/worker selection required generalizing the shuffle
function to be able to shuffle just part of a vector. This lets us
stick any down service nodes at the end of the potential list, then
select validators by only shuffling the part of the index vector that
contains active service indices. Once the validators are selected, the
remainder of the list (this time including decommissioned SN indices) is
shuffled to select quorum workers to check, thus allowing decommisioned
nodes to be randomly included in the nodes to check without being
selected as a validator.
- Swarm recalculation was not quite right: swarms were recalculated on
SN registrations, even if those registrations were include shared node
registrations, but *not* recalculated on stakes. Starting with the
upgrade this behaviour is fixed (swarms aren't actually used currently
and aren't consensus-relevant so recalculating early won't hurt
anything).
- Details on decomm/dereg are added to RPC info and print_sn/print_sn_status
- Slightly improves the % of reward output in the print_sn output by
rounding it to two digits, and reserves space in the output string to
avoid excessive reallocations.
- Adds various debugging at higher debug levels to quorum voting (into
all of voting itself, vote transmission, and vote reception).
- Reset service node list internal data structure version to 0. The SN
list has to be rescanned anyway at upgrade (its size has changed), so we
might as well reset the version and remove the version-dependent
serialization code. (Note that the affected code here is for SN states
in lmdb storage, not for SN-to-SN communication serialization).
2019-06-18 23:57:02 +02:00
if ( tx . type = = txtype : : state_change )
2019-01-25 04:15:52 +01:00
{
Relax deregistration rules
The replaces the deregistration mechanism with a new state change
mechanism (beginning at the v12 fork) which can change a service node's
network status via three potential values (and is extensible in the
future to handle more):
- deregistered -- this is the same as the existing deregistration; the
SN is instantly removed from the SN list.
- decommissioned -- this is a sort of temporary deregistration: your SN
remains in the service node list, but is removed from the rewards list
and from any network duties.
- recommissioned -- this tx is sent by a quorum if they observe a
decommissioned SN sending uptime proofs again. Upon reception, the SN
is reactivated and put on the end of the reward list.
Since this is broadening the quorum use, this also renames the relevant
quorum to a "obligations" quorum (since it validates SN obligations),
while the transactions are "state_change" transactions (since they
change the state of a registered SN).
The new parameters added to service_node_rules.h control how this works:
// Service node decommissioning: as service nodes stay up they earn "credits" (measured in blocks)
// towards a future outage. A new service node starts out with INITIAL_CREDIT, and then builds up
// CREDIT_PER_DAY for each day the service node remains active up to a maximum of
// DECOMMISSION_MAX_CREDIT.
//
// If a service node stops sending uptime proofs, a quorum will consider whether the service node
// has built up enough credits (at least MINIMUM): if so, instead of submitting a deregistration,
// it instead submits a decommission. This removes the service node from the list of active
// service nodes both for rewards and for any active network duties. If the service node comes
// back online (i.e. starts sending the required performance proofs again) before the credits run
// out then a quorum will reinstate the service node using a recommission transaction, which adds
// the service node back to the bottom of the service node reward list, and resets its accumulated
// credits to 0. If it does not come back online within the required number of blocks (i.e. the
// accumulated credit at the point of decommissioning) then a quorum will send a permanent
// deregistration transaction to the network, starting a 30-day deregistration count down.
This commit currently includes values (which are not necessarily
finalized):
- 8 hours (240 blocks) of credit required for activation of a
decommission (rather than a deregister)
- 0 initial credits at registration
- a maximum of 24 hours (720 blocks) of credits
- credits accumulate at a rate that you hit 24 hours of credits after 30
days of operation.
Miscellaneous other details of this PR:
- a new TX extra tag is used for the state change (including
deregistrations). The old extra tag has no version or type tag, so
couldn't be reused. The data in the new tag is slightly more
efficiently packed than the old deregistration transaction, so it gets
used for deregistrations (starting at the v12 fork) as well.
- Correct validator/worker selection required generalizing the shuffle
function to be able to shuffle just part of a vector. This lets us
stick any down service nodes at the end of the potential list, then
select validators by only shuffling the part of the index vector that
contains active service indices. Once the validators are selected, the
remainder of the list (this time including decommissioned SN indices) is
shuffled to select quorum workers to check, thus allowing decommisioned
nodes to be randomly included in the nodes to check without being
selected as a validator.
- Swarm recalculation was not quite right: swarms were recalculated on
SN registrations, even if those registrations were include shared node
registrations, but *not* recalculated on stakes. Starting with the
upgrade this behaviour is fixed (swarms aren't actually used currently
and aren't consensus-relevant so recalculating early won't hurt
anything).
- Details on decomm/dereg are added to RPC info and print_sn/print_sn_status
- Slightly improves the % of reward output in the print_sn output by
rounding it to two digits, and reserves space in the output string to
avoid excessive reallocations.
- Adds various debugging at higher debug levels to quorum voting (into
all of voting itself, vote transmission, and vote reception).
- Reset service node list internal data structure version to 0. The SN
list has to be rescanned anyway at upgrade (its size has changed), so we
might as well reset the version and remove the version-dependent
serialization code. (Note that the affected code here is for SN states
in lmdb storage, not for SN-to-SN communication serialization).
2019-06-18 23:57:02 +02:00
tx_extra_service_node_state_change state_change ;
if ( ! get_service_node_state_change_from_tx_extra ( tx . extra , state_change , hf_version ) )
2019-01-25 04:15:52 +01:00
{
Relax deregistration rules
The replaces the deregistration mechanism with a new state change
mechanism (beginning at the v12 fork) which can change a service node's
network status via three potential values (and is extensible in the
future to handle more):
- deregistered -- this is the same as the existing deregistration; the
SN is instantly removed from the SN list.
- decommissioned -- this is a sort of temporary deregistration: your SN
remains in the service node list, but is removed from the rewards list
and from any network duties.
- recommissioned -- this tx is sent by a quorum if they observe a
decommissioned SN sending uptime proofs again. Upon reception, the SN
is reactivated and put on the end of the reward list.
Since this is broadening the quorum use, this also renames the relevant
quorum to a "obligations" quorum (since it validates SN obligations),
while the transactions are "state_change" transactions (since they
change the state of a registered SN).
The new parameters added to service_node_rules.h control how this works:
// Service node decommissioning: as service nodes stay up they earn "credits" (measured in blocks)
// towards a future outage. A new service node starts out with INITIAL_CREDIT, and then builds up
// CREDIT_PER_DAY for each day the service node remains active up to a maximum of
// DECOMMISSION_MAX_CREDIT.
//
// If a service node stops sending uptime proofs, a quorum will consider whether the service node
// has built up enough credits (at least MINIMUM): if so, instead of submitting a deregistration,
// it instead submits a decommission. This removes the service node from the list of active
// service nodes both for rewards and for any active network duties. If the service node comes
// back online (i.e. starts sending the required performance proofs again) before the credits run
// out then a quorum will reinstate the service node using a recommission transaction, which adds
// the service node back to the bottom of the service node reward list, and resets its accumulated
// credits to 0. If it does not come back online within the required number of blocks (i.e. the
// accumulated credit at the point of decommissioning) then a quorum will send a permanent
// deregistration transaction to the network, starting a 30-day deregistration count down.
This commit currently includes values (which are not necessarily
finalized):
- 8 hours (240 blocks) of credit required for activation of a
decommission (rather than a deregister)
- 0 initial credits at registration
- a maximum of 24 hours (720 blocks) of credits
- credits accumulate at a rate that you hit 24 hours of credits after 30
days of operation.
Miscellaneous other details of this PR:
- a new TX extra tag is used for the state change (including
deregistrations). The old extra tag has no version or type tag, so
couldn't be reused. The data in the new tag is slightly more
efficiently packed than the old deregistration transaction, so it gets
used for deregistrations (starting at the v12 fork) as well.
- Correct validator/worker selection required generalizing the shuffle
function to be able to shuffle just part of a vector. This lets us
stick any down service nodes at the end of the potential list, then
select validators by only shuffling the part of the index vector that
contains active service indices. Once the validators are selected, the
remainder of the list (this time including decommissioned SN indices) is
shuffled to select quorum workers to check, thus allowing decommisioned
nodes to be randomly included in the nodes to check without being
selected as a validator.
- Swarm recalculation was not quite right: swarms were recalculated on
SN registrations, even if those registrations were include shared node
registrations, but *not* recalculated on stakes. Starting with the
upgrade this behaviour is fixed (swarms aren't actually used currently
and aren't consensus-relevant so recalculating early won't hurt
anything).
- Details on decomm/dereg are added to RPC info and print_sn/print_sn_status
- Slightly improves the % of reward output in the print_sn output by
rounding it to two digits, and reserves space in the output string to
avoid excessive reallocations.
- Adds various debugging at higher debug levels to quorum voting (into
all of voting itself, vote transmission, and vote reception).
- Reset service node list internal data structure version to 0. The SN
list has to be rescanned anyway at upgrade (its size has changed), so we
might as well reset the version and remove the version-dependent
serialization code. (Note that the affected code here is for SN states
in lmdb storage, not for SN-to-SN communication serialization).
2019-06-18 23:57:02 +02:00
MERROR_VER ( " TX did not have the state change metadata in the tx_extra " ) ;
2019-01-25 04:15:52 +01:00
return false ;
}
2019-07-04 09:25:02 +02:00
auto const quorum_type = service_nodes : : quorum_type : : obligations ;
2019-10-15 19:52:49 +02:00
auto const quorum = m_service_node_list . get_quorum ( quorum_type , state_change . block_height ) ;
2019-01-25 04:15:52 +01:00
{
2019-07-04 09:25:02 +02:00
if ( ! quorum )
{
MERROR_VER ( " could not get obligations quorum for recent state change tx " ) ;
return false ;
}
2019-01-25 04:15:52 +01:00
2019-07-04 09:25:02 +02:00
if ( ! service_nodes : : verify_tx_state_change ( state_change , get_current_blockchain_height ( ) , tvc , * quorum , hf_version ) )
{
// will be set by the above on serious failures (i.e. illegal value), but not for less
// serious ones like state change heights slightly outside of allowed bounds:
//tvc.m_verifivation_failed = true;
MERROR_VER ( " tx " < < get_transaction_hash ( tx ) < < " : state change tx could not be completely verified reason: " < < print_vote_verification_context ( tvc . m_vote_ctx ) ) ;
return false ;
}
2019-01-25 04:15:52 +01:00
}
2019-07-04 09:25:02 +02:00
crypto : : public_key const & state_change_service_node_pubkey = quorum - > workers [ state_change . service_node_index ] ;
2019-08-12 01:48:47 +02:00
//
// NOTE: Query the Service Node List for the in question Service Node the state change is for and disallow if conflicting
//
std : : vector < service_nodes : : service_node_pubkey_info > service_node_array = m_service_node_list . get_service_node_list_state ( { state_change_service_node_pubkey } ) ;
if ( service_node_array . empty ( ) )
2019-01-25 04:15:52 +01:00
{
2019-08-12 01:48:47 +02:00
MERROR_VER ( " Service Node no longer exists on the network, state change can be ignored " ) ;
return hf_version < cryptonote : : network_version_12_checkpointing ; // NOTE: Used to be allowed pre HF12.
2019-07-09 05:59:42 +02:00
}
2019-01-25 04:15:52 +01:00
Use shared_ptr storage for service_node_info
This converts the stored service_node_info value into a
`shared_ptr<const service_node_info>` rather than a plain
`service_node_info`. This yields a huge performance benefit by
significantly eliminating the vast majority of service_node_info
construction, destruction, and copying.
Most of the time when we copy a service_node_info nothing in it has
changed, which means we're storing exactly the same thing; this means an
extra construction for every SN info on every block *and* an extra
destruction when we cull old stored history. By using a
shared_ptr, the vast majority of those constructions and destructions
are eliminated.
The immediately previous commit (upon which this one builds) already
reduced a full rescan from 180s to 171s; this commit further reduces
that time to 104s, or about 42% reduced from the rescan time required
before this pair of commits. (All timings are from the dev.lokinet.org
box, tested over multiple runs with the entire lmdb cached in memory).
With the shared_ptr approach, we only make a copy when a change is
actually needed: because of infrequent (at the per-SN level) events like
a state_change, received reward, contribution, etc. The contained
reference is deliberately `const` so that values are not changeable;
there's a new function that does an explicit copying duplication,
returning the new non-const and storing the const ref in the shared
pointer.
Related to this is a small change (and fix) to how proof info and
public_ip/storage_port are stored: rather than store the values in the
service_node_info struct itself, they now gets stored in a shared_ptr
inside the service_node_info that intentionally gets shared among all
copies of the service_node_info (that is, a SN info copy deliberately
copies the pointer rather than the values). This also moves the ip/port
values into the proof struct, since that seemed much easier than
maintaining a separate shared_ptr for each value.
Previously, because these were stored as values in the service_node_info
they would actually get rolled back in the event of a reorg, but that
seems highly undesirable: you would end up rolling back to the old
values of the uptime proof and ip address (for example), but that should
not happen: those values are not dependent on the blockchain and so
should not be affected by a reorg/rollback. With this change they
aren't since there is only one actual proof stored.
Note that the shared storage here only applies to in-memory states;
states loaded from the db will still be duplicated.
2019-08-11 18:19:24 +02:00
service_nodes : : service_node_info const & service_node_info = * service_node_array [ 0 ] . info ;
2019-08-12 01:48:47 +02:00
if ( ! service_node_info . can_transition_to_state ( hf_version , state_change . block_height , state_change . state ) )
{
MERROR_VER ( " State change trying to vote Service Node into the same state it already is in, (aka double spend) " ) ;
tvc . m_double_spend = true ;
return false ;
2019-01-25 04:15:52 +01:00
}
}
2019-06-11 20:53:46 +02:00
else if ( tx . type = = txtype : : key_image_unlock )
2019-01-25 04:15:52 +01:00
{
cryptonote : : tx_extra_tx_key_image_unlock unlock ;
2020-06-02 05:47:20 +02:00
if ( ! cryptonote : : get_field_from_tx_extra ( tx . extra , unlock ) )
2019-01-25 04:15:52 +01:00
{
MERROR ( " TX extra didn't have key image unlock in the tx_extra " ) ;
return false ;
}
service_nodes : : service_node_info : : contribution_t contribution = { } ;
uint64_t unlock_height = 0 ;
if ( ! m_service_node_list . is_key_image_locked ( unlock . key_image , & unlock_height , & contribution ) )
{
MERROR_VER ( " Requested key image: " < < epee : : string_tools : : pod_to_hex ( unlock . key_image ) < < " to unlock is not locked " ) ;
tvc . m_invalid_input = true ;
return false ;
}
crypto : : hash const hash = service_nodes : : generate_request_stake_unlock_hash ( unlock . nonce ) ;
if ( ! crypto : : check_signature ( hash , contribution . key_image_pub_key , unlock . signature ) )
{
MERROR ( " Could not verify key image unlock transaction signature for tx: " < < get_transaction_hash ( tx ) ) ;
return false ;
}
// Otherwise is a locked key image, if the unlock_height is set, it has been previously requested to unlock
if ( unlock_height ! = service_nodes : : KEY_IMAGE_AWAITING_UNLOCK_HEIGHT )
{
tvc . m_double_spend = true ;
return false ;
}
}
else
{
MERROR_VER ( " Unhandled tx type: " < < tx . type < < " rejecting tx: " < < get_transaction_hash ( tx ) ) ;
tvc . m_invalid_type = true ; ;
return false ;
}
}
2015-12-14 06:40:16 +01:00
return true ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
//------------------------------------------------------------------
2019-07-02 17:18:53 +02:00
void Blockchain : : check_ring_signature ( const crypto : : hash & tx_prefix_hash , const crypto : : key_image & key_image , const std : : vector < rct : : ctkey > & pubkeys , const std : : vector < crypto : : signature > & sig , uint64_t & result ) const
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2015-12-14 06:40:16 +01:00
std : : vector < const crypto : : public_key * > p_output_keys ;
2018-04-16 01:16:02 +02:00
p_output_keys . reserve ( pubkeys . size ( ) ) ;
2015-12-14 06:40:16 +01:00
for ( auto & key : pubkeys )
{
2016-06-16 00:37:13 +02:00
// rct::key and crypto::public_key have the same structure, avoid object ctor/memcpy
p_output_keys . push_back ( & ( const crypto : : public_key & ) key . dest ) ;
2015-12-14 06:40:16 +01:00
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
result = crypto : : check_ring_signature ( tx_prefix_hash , key_image , p_output_keys , sig . data ( ) ) ? 1 : 0 ;
2014-10-07 01:46:25 +02:00
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2017-03-04 00:31:38 +01:00
//------------------------------------------------------------------
2018-07-18 23:24:53 +02:00
uint64_t Blockchain : : get_fee_quantization_mask ( )
2017-03-04 00:31:38 +01:00
{
static uint64_t mask = 0 ;
if ( mask = = 0 )
{
mask = 1 ;
for ( size_t n = PER_KB_FEE_QUANTIZATION_DECIMALS ; n < CRYPTONOTE_DISPLAY_DECIMAL_POINT ; + + n )
mask * = 10 ;
}
return mask ;
}
2016-10-28 00:43:44 +02:00
//------------------------------------------------------------------
2019-08-26 19:35:26 +02:00
byte_and_output_fees Blockchain : : get_dynamic_base_fee ( uint64_t block_reward , size_t median_block_weight , uint8_t version )
2016-10-28 00:43:44 +02:00
{
2018-07-18 23:24:53 +02:00
const uint64_t min_block_weight = get_min_block_weight ( version ) ;
if ( median_block_weight < min_block_weight )
median_block_weight = min_block_weight ;
2019-08-26 19:35:26 +02:00
byte_and_output_fees fees { 0 , 0 } ;
uint64_t hi , & lo = fees . first ;
2016-10-28 00:43:44 +02:00
2018-07-18 23:24:53 +02:00
if ( version > = HF_VERSION_PER_BYTE_FEE )
{
2019-06-25 11:22:43 +02:00
// fee = block_reward * DYNAMIC_FEE_REFERENCE_TRANSACTION_WEIGHT / min_block_weight / median_block_weight / 5
// (but done in 128-bit math). Note that the wallet uses FEE_PER_BYTE as a fallback if it can't
// get the dynamic fee from the daemon, so it needs to satisfy
// FEE_PER_BYTE >= BLOCK_REWARD * DYNAMIC_FEE_REFERENCE_TRANSACTION_WEIGHT / (min_block_weight)^2 / 5
// (The square because median_block_weight >= min_block_weight).
// As of writing we are past block 300000 with base block reward of ~32.04; and so the fee is below 214
// (hence the use of 215 in cryptonote_config.h).
//
2019-08-26 19:35:26 +02:00
// In v12 we increase the reference transaction fee by 80 (to 240000), and so the
2019-06-25 11:22:43 +02:00
// FEE_PER_BYTE fallback also goes up (to a conservative estimate of 17200).
//
2019-08-26 19:35:26 +02:00
// This calculation was painful for large txes (in particular sweeps and SN stakes), which
// wasn't intended, so in v13 we reduce the reference tx fee back to what it was before and
// introduce a per-output fee instead. (This is why this is an hard == instead of a >=).
const uint64_t reference_fee = version = = HF_VERSION_INCREASE_FEE ? DYNAMIC_FEE_REFERENCE_TRANSACTION_WEIGHT_V12 : DYNAMIC_FEE_REFERENCE_TRANSACTION_WEIGHT ;
2019-06-25 11:22:43 +02:00
lo = mul128 ( block_reward , reference_fee , & hi ) ;
2018-07-18 23:24:53 +02:00
div128_32 ( hi , lo , min_block_weight , & hi , & lo ) ;
div128_32 ( hi , lo , median_block_weight , & hi , & lo ) ;
assert ( hi = = 0 ) ;
lo / = 5 ;
2019-08-26 19:35:26 +02:00
if ( version > = HF_VERSION_PER_OUTPUT_FEE )
fees . second = FEE_PER_OUTPUT ;
return fees ;
2018-07-18 23:24:53 +02:00
}
2016-10-28 00:43:44 +02:00
2019-06-25 11:22:43 +02:00
constexpr uint64_t fee_base = DYNAMIC_FEE_PER_KB_BASE_FEE_V5 ;
2017-03-14 20:28:38 +01:00
2018-07-18 23:24:53 +02:00
uint64_t unscaled_fee_base = ( fee_base * min_block_weight / median_block_weight ) ;
lo = mul128 ( unscaled_fee_base , block_reward , & hi ) ;
2016-10-28 00:43:44 +02:00
static_assert ( DYNAMIC_FEE_PER_KB_BASE_BLOCK_REWARD % 1000000 = = 0 , " DYNAMIC_FEE_PER_KB_BASE_BLOCK_REWARD must be divisible by 1000000 " ) ;
static_assert ( DYNAMIC_FEE_PER_KB_BASE_BLOCK_REWARD / 1000000 < = std : : numeric_limits < uint32_t > : : max ( ) , " DYNAMIC_FEE_PER_KB_BASE_BLOCK_REWARD is too large " ) ;
2017-03-14 20:28:38 +01:00
2016-10-28 00:43:44 +02:00
// divide in two steps, since the divisor must be 32 bits, but DYNAMIC_FEE_PER_KB_BASE_BLOCK_REWARD isn't
div128_32 ( hi , lo , DYNAMIC_FEE_PER_KB_BASE_BLOCK_REWARD / 1000000 , & hi , & lo ) ;
div128_32 ( hi , lo , 1000000 , & hi , & lo ) ;
assert ( hi = = 0 ) ;
2017-03-04 00:31:38 +01:00
// quantize fee up to 8 decimals
uint64_t mask = get_fee_quantization_mask ( ) ;
uint64_t qlo = ( lo + mask - 1 ) / mask * mask ;
MDEBUG ( " lo " < < print_money ( lo ) < < " , qlo " < < print_money ( qlo ) < < " , mask " < < mask ) ;
2019-08-26 19:35:26 +02:00
fees . first = qlo ;
return fees ;
2016-10-28 00:43:44 +02:00
}
//------------------------------------------------------------------
Generic burn fee checking + blink burn fee checking
This adds the ability for check_fee() to also check the burn amount.
This requires passing extra info through `add_tx()` (and the various
things that call it), so I took the:
bool keeped_by_block, bool relayed, bool do_not_relay
argument triplet, moved it into a struct in tx_pool.h, then added the other fee
options there (along with some static factory functions for generating the
typical sets of option).
The majority of this commit is chasing that change through the codebase and
test suite.
This is used by blink but should also help LNS and other future burn
transactions to verify a burn amount simply when adding the transation to the
mempool. It supports a fixed burn amount, a burn amount as a multiple of the
minimum tx fee, and also allows you to increase the minimum tx fee (so that,
for example, we could require blink txes to pay miners 250% of the usual
minimum (unimportant) priority tx fee.
- Removed a useless core::add_new_tx() overload that wasn't used anywhere.
Blink-specific changes:
(I'd normally separate these into a separate commit, but they got interwoven
fairly heavily with the above change).
- changed the way blink burning is specified so that we have three knobs for
fee adjustment (fixed burn fee; base fee multiple; and required miner tx fee).
The fixed amount is currently 0, base fee is 400%, and require miner tx fee is
simply 100% (i.e. no different than a normal transaction). This is the same as
before this commit, but is changing how they are being specified in
cryptonote_config.h.
- blink tx fee, burn amount, and miner tx fee (if > 100%) now get checked
before signing a blink tx. (These fee checks don't apply to anyone else --
when propagating over the network only the miner tx fee is checked).
- Added a couple of checks for blink quorums: 1) make sure they have reached
the blink hf; 2) make sure the submitted tx version conforms to the current hf
min/max tx version.
- print blink fee information in simplewallet's `fee` output
- add "typical" fee calculations in the `fee` output:
[wallet T6SCwL (has locked stakes)]: fee
Current fee is 0.000000850 loki per byte + 0.020000000 loki per output
No backlog at priority 1
No backlog at priority 2
No backlog at priority 3
No backlog at priority 4
Current blink fee is 0.000004250 loki per byte + 0.100000000 loki per output
Estimated typical small transaction fees: 0.042125000 (unimportant), 0.210625000 (normal), 1.053125000 (elevated), 5.265625000 (priority), 0.210625000 (blink)
where "small" here is the same tx size (2500 bytes + 2 outputs) used to
estimate backlogs.
2019-11-09 04:14:15 +01:00
bool Blockchain : : check_fee ( size_t tx_weight , size_t tx_outs , uint64_t fee , uint64_t burned , const tx_pool_options & opts ) const
2016-10-28 00:43:44 +02:00
{
const uint8_t version = get_current_hard_fork_version ( ) ;
2020-04-07 07:21:50 +02:00
const uint64_t blockchain_height = get_current_blockchain_height ( ) ;
2016-10-28 00:43:44 +02:00
2019-08-23 02:32:34 +02:00
uint64_t median = m_current_block_cumul_weight_limit / 2 ;
Generic burn fee checking + blink burn fee checking
This adds the ability for check_fee() to also check the burn amount.
This requires passing extra info through `add_tx()` (and the various
things that call it), so I took the:
bool keeped_by_block, bool relayed, bool do_not_relay
argument triplet, moved it into a struct in tx_pool.h, then added the other fee
options there (along with some static factory functions for generating the
typical sets of option).
The majority of this commit is chasing that change through the codebase and
test suite.
This is used by blink but should also help LNS and other future burn
transactions to verify a burn amount simply when adding the transation to the
mempool. It supports a fixed burn amount, a burn amount as a multiple of the
minimum tx fee, and also allows you to increase the minimum tx fee (so that,
for example, we could require blink txes to pay miners 250% of the usual
minimum (unimportant) priority tx fee.
- Removed a useless core::add_new_tx() overload that wasn't used anywhere.
Blink-specific changes:
(I'd normally separate these into a separate commit, but they got interwoven
fairly heavily with the above change).
- changed the way blink burning is specified so that we have three knobs for
fee adjustment (fixed burn fee; base fee multiple; and required miner tx fee).
The fixed amount is currently 0, base fee is 400%, and require miner tx fee is
simply 100% (i.e. no different than a normal transaction). This is the same as
before this commit, but is changing how they are being specified in
cryptonote_config.h.
- blink tx fee, burn amount, and miner tx fee (if > 100%) now get checked
before signing a blink tx. (These fee checks don't apply to anyone else --
when propagating over the network only the miner tx fee is checked).
- Added a couple of checks for blink quorums: 1) make sure they have reached
the blink hf; 2) make sure the submitted tx version conforms to the current hf
min/max tx version.
- print blink fee information in simplewallet's `fee` output
- add "typical" fee calculations in the `fee` output:
[wallet T6SCwL (has locked stakes)]: fee
Current fee is 0.000000850 loki per byte + 0.020000000 loki per output
No backlog at priority 1
No backlog at priority 2
No backlog at priority 3
No backlog at priority 4
Current blink fee is 0.000004250 loki per byte + 0.100000000 loki per output
Estimated typical small transaction fees: 0.042125000 (unimportant), 0.210625000 (normal), 1.053125000 (elevated), 5.265625000 (priority), 0.210625000 (blink)
where "small" here is the same tx size (2500 bytes + 2 outputs) used to
estimate backlogs.
2019-11-09 04:14:15 +01:00
uint64_t already_generated_coins = blockchain_height ? m_db - > get_block_already_generated_coins ( blockchain_height - 1 ) : 0 ;
2019-09-19 04:20:33 +02:00
uint64_t base_reward , base_reward_unpenalized ;
if ( ! get_base_block_reward ( median , 1 , already_generated_coins , base_reward , base_reward_unpenalized , version , blockchain_height ) )
2019-08-23 02:32:34 +02:00
return false ;
2016-10-28 00:43:44 +02:00
2018-07-18 23:24:53 +02:00
uint64_t needed_fee ;
if ( version > = HF_VERSION_PER_BYTE_FEE )
{
2019-01-21 18:18:50 +01:00
const bool use_long_term_median_in_fee = version > = HF_VERSION_LONG_TERM_BLOCK_WEIGHT ;
2020-05-28 04:49:24 +02:00
auto fees = get_dynamic_base_fee ( base_reward , use_long_term_median_in_fee ? std : : min < uint64_t > ( median , m_long_term_effective_median_block_weight ) : median , version ) ;
2019-08-26 19:35:26 +02:00
MDEBUG ( " Using " < < print_money ( fees . first ) < < " /byte + " < < print_money ( fees . second ) < < " /out fee " ) ;
needed_fee = tx_weight * fees . first + tx_outs * fees . second ;
2018-07-18 23:24:53 +02:00
// quantize fee up to 8 decimals
const uint64_t mask = get_fee_quantization_mask ( ) ;
needed_fee = ( needed_fee + mask - 1 ) / mask * mask ;
}
else
{
2019-08-26 19:35:26 +02:00
auto fees = get_dynamic_base_fee ( base_reward , median , version ) ;
assert ( fees . second = = 0 ) ;
MDEBUG ( " Using " < < print_money ( fees . first ) < < " /kB fee " ) ;
2018-07-18 23:24:53 +02:00
needed_fee = tx_weight / 1024 ;
needed_fee + = ( tx_weight % 1024 ) ? 1 : 0 ;
2019-08-26 19:35:26 +02:00
needed_fee * = fees . first ;
2018-07-18 23:24:53 +02:00
}
2016-10-28 00:43:44 +02:00
Generic burn fee checking + blink burn fee checking
This adds the ability for check_fee() to also check the burn amount.
This requires passing extra info through `add_tx()` (and the various
things that call it), so I took the:
bool keeped_by_block, bool relayed, bool do_not_relay
argument triplet, moved it into a struct in tx_pool.h, then added the other fee
options there (along with some static factory functions for generating the
typical sets of option).
The majority of this commit is chasing that change through the codebase and
test suite.
This is used by blink but should also help LNS and other future burn
transactions to verify a burn amount simply when adding the transation to the
mempool. It supports a fixed burn amount, a burn amount as a multiple of the
minimum tx fee, and also allows you to increase the minimum tx fee (so that,
for example, we could require blink txes to pay miners 250% of the usual
minimum (unimportant) priority tx fee.
- Removed a useless core::add_new_tx() overload that wasn't used anywhere.
Blink-specific changes:
(I'd normally separate these into a separate commit, but they got interwoven
fairly heavily with the above change).
- changed the way blink burning is specified so that we have three knobs for
fee adjustment (fixed burn fee; base fee multiple; and required miner tx fee).
The fixed amount is currently 0, base fee is 400%, and require miner tx fee is
simply 100% (i.e. no different than a normal transaction). This is the same as
before this commit, but is changing how they are being specified in
cryptonote_config.h.
- blink tx fee, burn amount, and miner tx fee (if > 100%) now get checked
before signing a blink tx. (These fee checks don't apply to anyone else --
when propagating over the network only the miner tx fee is checked).
- Added a couple of checks for blink quorums: 1) make sure they have reached
the blink hf; 2) make sure the submitted tx version conforms to the current hf
min/max tx version.
- print blink fee information in simplewallet's `fee` output
- add "typical" fee calculations in the `fee` output:
[wallet T6SCwL (has locked stakes)]: fee
Current fee is 0.000000850 loki per byte + 0.020000000 loki per output
No backlog at priority 1
No backlog at priority 2
No backlog at priority 3
No backlog at priority 4
Current blink fee is 0.000004250 loki per byte + 0.100000000 loki per output
Estimated typical small transaction fees: 0.042125000 (unimportant), 0.210625000 (normal), 1.053125000 (elevated), 5.265625000 (priority), 0.210625000 (blink)
where "small" here is the same tx size (2500 bytes + 2 outputs) used to
estimate backlogs.
2019-11-09 04:14:15 +01:00
uint64_t required_percent = std : : max ( opts . fee_percent , uint64_t { 100 } ) ;
needed_fee - = needed_fee / 50 ; // keep a little 2% buffer on acceptance
uint64_t base_miner_fee = needed_fee ;
needed_fee = needed_fee * required_percent / 100 ;
if ( fee < needed_fee )
2016-10-28 00:43:44 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " transaction fee is not enough: " < < print_money ( fee ) < < " , minimum fee: " < < print_money ( needed_fee ) ) ;
2016-10-28 00:43:44 +02:00
return false ;
}
Generic burn fee checking + blink burn fee checking
This adds the ability for check_fee() to also check the burn amount.
This requires passing extra info through `add_tx()` (and the various
things that call it), so I took the:
bool keeped_by_block, bool relayed, bool do_not_relay
argument triplet, moved it into a struct in tx_pool.h, then added the other fee
options there (along with some static factory functions for generating the
typical sets of option).
The majority of this commit is chasing that change through the codebase and
test suite.
This is used by blink but should also help LNS and other future burn
transactions to verify a burn amount simply when adding the transation to the
mempool. It supports a fixed burn amount, a burn amount as a multiple of the
minimum tx fee, and also allows you to increase the minimum tx fee (so that,
for example, we could require blink txes to pay miners 250% of the usual
minimum (unimportant) priority tx fee.
- Removed a useless core::add_new_tx() overload that wasn't used anywhere.
Blink-specific changes:
(I'd normally separate these into a separate commit, but they got interwoven
fairly heavily with the above change).
- changed the way blink burning is specified so that we have three knobs for
fee adjustment (fixed burn fee; base fee multiple; and required miner tx fee).
The fixed amount is currently 0, base fee is 400%, and require miner tx fee is
simply 100% (i.e. no different than a normal transaction). This is the same as
before this commit, but is changing how they are being specified in
cryptonote_config.h.
- blink tx fee, burn amount, and miner tx fee (if > 100%) now get checked
before signing a blink tx. (These fee checks don't apply to anyone else --
when propagating over the network only the miner tx fee is checked).
- Added a couple of checks for blink quorums: 1) make sure they have reached
the blink hf; 2) make sure the submitted tx version conforms to the current hf
min/max tx version.
- print blink fee information in simplewallet's `fee` output
- add "typical" fee calculations in the `fee` output:
[wallet T6SCwL (has locked stakes)]: fee
Current fee is 0.000000850 loki per byte + 0.020000000 loki per output
No backlog at priority 1
No backlog at priority 2
No backlog at priority 3
No backlog at priority 4
Current blink fee is 0.000004250 loki per byte + 0.100000000 loki per output
Estimated typical small transaction fees: 0.042125000 (unimportant), 0.210625000 (normal), 1.053125000 (elevated), 5.265625000 (priority), 0.210625000 (blink)
where "small" here is the same tx size (2500 bytes + 2 outputs) used to
estimate backlogs.
2019-11-09 04:14:15 +01:00
if ( opts . burn_fixed | | opts . burn_percent )
{
uint64_t need_burned = opts . burn_fixed + base_miner_fee * opts . burn_percent / 100 ;
if ( burned < need_burned )
{
MERROR_VER ( " transaction burned fee is not enough: " < < print_money ( burned ) < < " , minimum fee: " < < print_money ( need_burned ) ) ;
return false ;
}
}
2016-10-28 00:43:44 +02:00
return true ;
}
2016-10-28 22:19:40 +02:00
//------------------------------------------------------------------
2019-08-26 19:35:26 +02:00
byte_and_output_fees Blockchain : : get_dynamic_base_fee_estimate ( uint64_t grace_blocks ) const
2016-10-28 22:19:40 +02:00
{
const uint8_t version = get_current_hard_fork_version ( ) ;
2019-02-19 12:00:27 +01:00
const uint64_t db_height = m_db - > height ( ) ;
2016-10-28 22:19:40 +02:00
if ( grace_blocks > = CRYPTONOTE_REWARD_BLOCKS_WINDOW )
grace_blocks = CRYPTONOTE_REWARD_BLOCKS_WINDOW - 1 ;
2018-07-18 23:24:53 +02:00
const uint64_t min_block_weight = get_min_block_weight ( version ) ;
2019-02-25 08:33:06 +01:00
std : : vector < uint64_t > weights ;
2018-07-18 23:24:53 +02:00
get_last_n_blocks_weights ( weights , CRYPTONOTE_REWARD_BLOCKS_WINDOW - grace_blocks ) ;
weights . reserve ( grace_blocks ) ;
2016-10-28 22:19:40 +02:00
for ( size_t i = 0 ; i < grace_blocks ; + + i )
2018-07-18 23:24:53 +02:00
weights . push_back ( min_block_weight ) ;
2016-10-28 22:19:40 +02:00
2018-07-18 23:24:53 +02:00
uint64_t median = epee : : misc_utils : : median ( weights ) ;
if ( median < = min_block_weight )
median = min_block_weight ;
2016-10-28 22:19:40 +02:00
2019-02-19 12:00:27 +01:00
uint64_t already_generated_coins = db_height ? m_db - > get_block_already_generated_coins ( db_height - 1 ) : 0 ;
2019-09-19 04:20:33 +02:00
uint64_t base_reward , base_reward_unpenalized ;
2020-05-28 04:49:24 +02:00
if ( ! get_base_block_reward ( m_current_block_cumul_weight_limit / 2 , 1 , already_generated_coins , base_reward , base_reward_unpenalized , version , m_db - > height ( ) ) )
2016-12-01 11:28:46 +01:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR ( " Failed to determine block reward, using placeholder " < < print_money ( BLOCK_REWARD_OVERESTIMATE ) < < " as a high bound " ) ;
2016-12-01 11:28:46 +01:00
base_reward = BLOCK_REWARD_OVERESTIMATE ;
}
2016-10-28 22:19:40 +02:00
2019-01-21 18:18:50 +01:00
const bool use_long_term_median_in_fee = version > = HF_VERSION_LONG_TERM_BLOCK_WEIGHT ;
2019-09-28 21:51:51 +02:00
const uint64_t use_median_value = use_long_term_median_in_fee ? std : : min < uint64_t > ( median , m_long_term_effective_median_block_weight ) : median ;
2020-05-22 07:05:43 +02:00
auto fee = get_dynamic_base_fee ( base_reward , use_median_value , version ) ;
2018-07-18 23:24:53 +02:00
const bool per_byte = version < HF_VERSION_PER_BYTE_FEE ;
2019-08-26 19:35:26 +02:00
MDEBUG ( " Estimating " < < grace_blocks < < " -block fee at " < < print_money ( fee . first ) < < " / " < < ( per_byte ? " byte " : " kB " ) < <
" + " < < print_money ( fee . second ) < < " /out " ) ;
2016-10-28 22:19:40 +02:00
return fee ;
}
2014-10-07 01:46:25 +02:00
//------------------------------------------------------------------
// This function checks to see if a tx is unlocked. unlock_time is either
// a block index or a unix time.
2018-08-03 03:39:28 +02:00
bool Blockchain : : is_output_spendtime_unlocked ( uint64_t unlock_time ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2018-08-03 03:39:28 +02:00
return cryptonote : : rules : : is_output_unlocked ( unlock_time , m_db - > height ( ) ) ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
// This function locates all outputs associated with a given input (mixins)
2019-10-23 07:12:29 +02:00
// and validates that they exist and are usable.
bool Blockchain : : check_tx_input ( const txin_to_key & txin , const crypto : : hash & tx_prefix_hash , std : : vector < rct : : ctkey > & output_keys , uint64_t * pmax_related_block_height )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
// ND:
// 1. Disable locking and make method private.
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
//std::unique_lock lock{*this};
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
struct outputs_visitor
{
2016-06-16 00:37:13 +02:00
std : : vector < rct : : ctkey > & m_output_keys ;
2015-12-14 06:40:16 +01:00
const Blockchain & m_bch ;
2016-06-16 00:37:13 +02:00
outputs_visitor ( std : : vector < rct : : ctkey > & output_keys , const Blockchain & bch ) :
2015-12-14 06:40:16 +01:00
m_output_keys ( output_keys ) , m_bch ( bch )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
}
2016-06-16 00:37:13 +02:00
bool handle_output ( uint64_t unlock_time , const crypto : : public_key & pubkey , const rct : : key & commitment )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2015-12-14 06:40:16 +01:00
//check tx unlock time
2018-08-03 03:39:28 +02:00
if ( ! m_bch . is_output_spendtime_unlocked ( unlock_time ) )
2015-12-14 06:40:16 +01:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " One of outputs for one of inputs has wrong tx.unlock_time = " < < unlock_time ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
return false ;
2015-12-14 06:40:16 +01:00
}
2015-12-25 22:56:37 +01:00
// The original code includes a check for the output corresponding to this input
// to be a txout_to_key. This is removed, as the database does not store this info,
// but only txout_to_key outputs are stored in the DB in the first place, done in
// Blockchain*::add_output
2016-06-16 00:37:13 +02:00
m_output_keys . push_back ( rct : : ctkey ( { rct : : pk2rct ( pubkey ) , commitment } ) ) ;
2015-12-14 06:40:16 +01:00
return true ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2015-12-14 06:40:16 +01:00
} ;
output_keys . clear ( ) ;
2016-03-25 07:22:06 +01:00
// collect output keys
2015-12-14 06:40:16 +01:00
outputs_visitor vi ( output_keys , * this ) ;
2019-06-11 20:53:46 +02:00
if ( ! scan_outputkeys_for_indexes ( txin , vi , tx_prefix_hash , pmax_related_block_height ) )
2015-12-14 06:40:16 +01:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Failed to get output keys for tx with amount = " < < print_money ( txin . amount ) < < " and count indexes " < < txin . key_offsets . size ( ) ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
if ( txin . key_offsets . size ( ) ! = output_keys . size ( ) )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Output keys for tx with amount = " < < txin . amount < < " and count indexes " < < txin . key_offsets . size ( ) < < " returned wrong keys count " < < output_keys . size ( ) ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
2016-08-09 12:38:54 +02:00
// rct_signatures will be expanded after this
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
//TODO: Is this intended to do something else? Need to look into the todo there.
2014-12-06 23:40:33 +01:00
uint64_t Blockchain : : get_adjusted_time ( ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
//TODO: add collecting median time
return time ( NULL ) ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2014-10-13 06:31:21 +02:00
//TODO: revisit, has changed a bit on upstream
2018-04-30 04:20:27 +02:00
bool Blockchain : : check_block_timestamp ( std : : vector < uint64_t > & timestamps , const block & b , uint64_t & median_ts ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2018-04-30 04:20:27 +02:00
median_ts = epee : : misc_utils : : median ( timestamps ) ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
if ( b . timestamp < median_ts )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Timestamp of block with id: " < < get_block_hash ( b ) < < " , " < < b . timestamp < < " , less than median of last " < < BLOCKCHAIN_TIMESTAMP_CHECK_WINDOW < < " blocks, " < < median_ts ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
// This function grabs the timestamps from the most recent <n> blocks,
// where n = BLOCKCHAIN_TIMESTAMP_CHECK_WINDOW. If there are not those many
// blocks in the blockchain, the timestap is assumed to be valid. If there
// are, this function returns:
// true if the block's timestamp is not less than the timestamp of the
// median of the selected blocks
// false otherwise
2018-04-30 04:20:27 +02:00
bool Blockchain : : check_block_timestamp ( const block & b , uint64_t & median_ts ) const
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2018-04-15 19:01:18 +02:00
uint64_t cryptonote_block_future_time_limit = CRYPTONOTE_BLOCK_FUTURE_TIME_LIMIT_V2 ;
if ( b . timestamp > get_adjusted_time ( ) + cryptonote_block_future_time_limit )
2015-12-14 06:40:16 +01:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Timestamp of block with id: " < < get_block_hash ( b ) < < " , " < < b . timestamp < < " , bigger than adjusted time + 2 hours " ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
2014-10-07 01:46:25 +02:00
2018-11-20 21:19:39 +01:00
const auto h = m_db - > height ( ) ;
2015-12-14 06:40:16 +01:00
// if not enough blocks, no proper median yet, return true
2018-11-20 21:19:39 +01:00
if ( h < BLOCKCHAIN_TIMESTAMP_CHECK_WINDOW )
2015-12-14 06:40:16 +01:00
{
return true ;
}
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
std : : vector < uint64_t > timestamps ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
// need most recent 60 blocks, get index of first of those
size_t offset = h - BLOCKCHAIN_TIMESTAMP_CHECK_WINDOW ;
2018-04-16 01:16:02 +02:00
timestamps . reserve ( h - offset ) ;
2015-12-14 06:40:16 +01:00
for ( ; offset < h ; + + offset )
{
timestamps . push_back ( m_db - > get_block_timestamp ( offset ) ) ;
}
2014-10-07 01:46:25 +02:00
2018-04-30 04:20:27 +02:00
return check_block_timestamp ( timestamps , b , median_ts ) ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2018-11-11 15:51:03 +01:00
void Blockchain : : return_tx_to_pool ( std : : vector < std : : pair < transaction , blobdata > > & txs )
blockchain: fix a few block addition bugs
If the block reward was too high, the verification failed flag
was set, but the function continued. The code which was supposed
to trap this flag and return failure failed to trap it, and,
while the block was not added to the chain, the function would
return success.
The reason for avoiding returning when the block reward problem
was detected was to be able to return any transactions to the
pool if needed. This is now mooted by moving the transaction
return code to a separate function, which is now called at all
appropriate points, making the logic much simpler, and hopefully
correct now.
We also move the hard fork version check after the prev_id check,
as block which does not go on the top of the chain might not
have the expected version there, without being invalid just for
this reason.
Last, we trap the case where a block fails to be added due to
using already spent key images, to set the verification failed
flag.
2015-12-25 23:13:38 +01:00
{
2016-01-29 16:09:17 +01:00
uint8_t version = get_current_hard_fork_version ( ) ;
blockchain: fix a few block addition bugs
If the block reward was too high, the verification failed flag
was set, but the function continued. The code which was supposed
to trap this flag and return failure failed to trap it, and,
while the block was not added to the chain, the function would
return success.
The reason for avoiding returning when the block reward problem
was detected was to be able to return any transactions to the
pool if needed. This is now mooted by moving the transaction
return code to a separate function, which is now called at all
appropriate points, making the logic much simpler, and hopefully
correct now.
We also move the hard fork version check after the prev_id check,
as block which does not go on the top of the chain might not
have the expected version there, without being invalid just for
this reason.
Last, we trap the case where a block fails to be added due to
using already spent key images, to set the verification failed
flag.
2015-12-25 23:13:38 +01:00
for ( auto & tx : txs )
{
2019-10-31 23:26:58 +01:00
cryptonote : : tx_verification_context tvc { } ;
blockchain: fix a few block addition bugs
If the block reward was too high, the verification failed flag
was set, but the function continued. The code which was supposed
to trap this flag and return failure failed to trap it, and,
while the block was not added to the chain, the function would
return success.
The reason for avoiding returning when the block reward problem
was detected was to be able to return any transactions to the
pool if needed. This is now mooted by moving the transaction
return code to a separate function, which is now called at all
appropriate points, making the logic much simpler, and hopefully
correct now.
We also move the hard fork version check after the prev_id check,
as block which does not go on the top of the chain might not
have the expected version there, without being invalid just for
this reason.
Last, we trap the case where a block fails to be added due to
using already spent key images, to set the verification failed
flag.
2015-12-25 23:13:38 +01:00
// We assume that if they were in a block, the transactions are already
// known to the network as a whole. However, if we had mined that block,
// that might not be always true. Unlikely though, and always relaying
// these again might cause a spike of traffic as many nodes re-relay
// all the transactions in a popped block when a reorg happens.
2018-11-11 15:51:03 +01:00
const size_t weight = get_transaction_weight ( tx . first , tx . second . size ( ) ) ;
const crypto : : hash tx_hash = get_transaction_hash ( tx . first ) ;
Generic burn fee checking + blink burn fee checking
This adds the ability for check_fee() to also check the burn amount.
This requires passing extra info through `add_tx()` (and the various
things that call it), so I took the:
bool keeped_by_block, bool relayed, bool do_not_relay
argument triplet, moved it into a struct in tx_pool.h, then added the other fee
options there (along with some static factory functions for generating the
typical sets of option).
The majority of this commit is chasing that change through the codebase and
test suite.
This is used by blink but should also help LNS and other future burn
transactions to verify a burn amount simply when adding the transation to the
mempool. It supports a fixed burn amount, a burn amount as a multiple of the
minimum tx fee, and also allows you to increase the minimum tx fee (so that,
for example, we could require blink txes to pay miners 250% of the usual
minimum (unimportant) priority tx fee.
- Removed a useless core::add_new_tx() overload that wasn't used anywhere.
Blink-specific changes:
(I'd normally separate these into a separate commit, but they got interwoven
fairly heavily with the above change).
- changed the way blink burning is specified so that we have three knobs for
fee adjustment (fixed burn fee; base fee multiple; and required miner tx fee).
The fixed amount is currently 0, base fee is 400%, and require miner tx fee is
simply 100% (i.e. no different than a normal transaction). This is the same as
before this commit, but is changing how they are being specified in
cryptonote_config.h.
- blink tx fee, burn amount, and miner tx fee (if > 100%) now get checked
before signing a blink tx. (These fee checks don't apply to anyone else --
when propagating over the network only the miner tx fee is checked).
- Added a couple of checks for blink quorums: 1) make sure they have reached
the blink hf; 2) make sure the submitted tx version conforms to the current hf
min/max tx version.
- print blink fee information in simplewallet's `fee` output
- add "typical" fee calculations in the `fee` output:
[wallet T6SCwL (has locked stakes)]: fee
Current fee is 0.000000850 loki per byte + 0.020000000 loki per output
No backlog at priority 1
No backlog at priority 2
No backlog at priority 3
No backlog at priority 4
Current blink fee is 0.000004250 loki per byte + 0.100000000 loki per output
Estimated typical small transaction fees: 0.042125000 (unimportant), 0.210625000 (normal), 1.053125000 (elevated), 5.265625000 (priority), 0.210625000 (blink)
where "small" here is the same tx size (2500 bytes + 2 outputs) used to
estimate backlogs.
2019-11-09 04:14:15 +01:00
if ( ! m_tx_pool . add_tx ( tx . first , tx_hash , tx . second , weight , tvc , tx_pool_options : : from_block ( ) , version ) )
blockchain: fix a few block addition bugs
If the block reward was too high, the verification failed flag
was set, but the function continued. The code which was supposed
to trap this flag and return failure failed to trap it, and,
while the block was not added to the chain, the function would
return success.
The reason for avoiding returning when the block reward problem
was detected was to be able to return any transactions to the
pool if needed. This is now mooted by moving the transaction
return code to a separate function, which is now called at all
appropriate points, making the logic much simpler, and hopefully
correct now.
We also move the hard fork version check after the prev_id check,
as block which does not go on the top of the chain might not
have the expected version there, without being invalid just for
this reason.
Last, we trap the case where a block fails to be added due to
using already spent key images, to set the verification failed
flag.
2015-12-25 23:13:38 +01:00
{
2018-11-11 15:51:03 +01:00
MERROR ( " Failed to return taken transaction with hash: " < < get_transaction_hash ( tx . first ) < < " to tx_pool " ) ;
blockchain: fix a few block addition bugs
If the block reward was too high, the verification failed flag
was set, but the function continued. The code which was supposed
to trap this flag and return failure failed to trap it, and,
while the block was not added to the chain, the function would
return success.
The reason for avoiding returning when the block reward problem
was detected was to be able to return any transactions to the
pool if needed. This is now mooted by moving the transaction
return code to a separate function, which is now called at all
appropriate points, making the logic much simpler, and hopefully
correct now.
We also move the hard fork version check after the prev_id check,
as block which does not go on the top of the chain might not
have the expected version there, without being invalid just for
this reason.
Last, we trap the case where a block fails to be added due to
using already spent key images, to set the verification failed
flag.
2015-12-25 23:13:38 +01:00
}
}
}
//------------------------------------------------------------------
2018-04-16 01:16:02 +02:00
bool Blockchain : : flush_txes_from_pool ( const std : : vector < crypto : : hash > & txids )
2016-01-30 14:28:26 +01:00
{
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { m_tx_pool } ;
2016-07-31 21:09:44 +02:00
2016-01-30 14:28:26 +01:00
bool res = true ;
for ( const auto & txid : txids )
{
cryptonote : : transaction tx ;
2018-11-11 15:51:03 +01:00
cryptonote : : blobdata txblob ;
2018-07-18 23:24:53 +02:00
size_t tx_weight ;
2016-01-30 14:28:26 +01:00
uint64_t fee ;
2017-09-22 14:57:20 +02:00
bool relayed , do_not_relay , double_spend_seen ;
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MINFO ( " Removing txid " < < txid < < " from the pool " ) ;
2018-11-11 15:51:03 +01:00
if ( m_tx_pool . have_tx ( txid ) & & ! m_tx_pool . take_tx ( txid , tx , txblob , tx_weight , fee , relayed , do_not_relay , double_spend_seen ) )
2016-01-30 14:28:26 +01:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR ( " Failed to remove txid " < < txid < < " from the pool " ) ;
2016-01-30 14:28:26 +01:00
res = false ;
}
}
return res ;
}
2020-08-20 09:08:17 +02:00
Blockchain : : block_pow_verified Blockchain : : verify_block_pow ( cryptonote : : block const & blk , difficulty_type difficulty , uint64_t chain_height , bool alt_block )
{
block_pow_verified result = { } ;
std : : memset ( result . proof_of_work . data , 0xff , sizeof ( result . proof_of_work . data ) ) ;
crypto : : hash const blk_hash = cryptonote : : get_block_hash ( blk ) ;
uint64_t const blk_height = cryptonote : : get_block_height ( blk ) ;
// There is a difficulty bug in lokid that caused a network disagreement at height 526483 where
// somewhere around half the network had a slightly-too-high difficulty value and accepted the
// block while nodes with the correct difficulty value rejected it. However this not-quite-enough
// difficulty chain had enough of the network following it that it got checkpointed several times
// and so cannot be rolled back.
//
// Hence this hack: starting at that block until the next hard fork, we allow a slight grace
// (0.2%) on the required difficulty (but we don't *change* the actual difficulty value used for
// diff calculation).
if ( cryptonote : : get_block_height ( blk ) > = 526483 & & m_hardfork - > get_current_version ( ) < network_version_16 )
difficulty = ( difficulty * 998 ) / 1000 ;
CHECK_AND_ASSERT_MES ( difficulty , result , " !!!!!!!!! difficulty overhead !!!!!!!!! " ) ;
if ( alt_block )
{
randomx_longhash_context randomx_context = { } ;
if ( blk . major_version > = cryptonote : : network_version_12_checkpointing )
{
randomx_context . current_blockchain_height = chain_height ;
randomx_context . seed_height = rx_seedheight ( blk_height ) ;
randomx_context . seed_block_hash = get_block_id_by_height ( randomx_context . seed_height ) ;
}
result . proof_of_work = get_altblock_longhash ( m_nettype , randomx_context , blk , blk_height ) ;
}
else
{
// Formerly the code below contained an if loop with the following condition
// !m_checkpoints.is_in_checkpoint_zone(get_current_blockchain_height())
// however, this caused the daemon to not bother checking PoW for blocks
// before checkpoints, which is very dangerous behaviour. We moved the PoW
// validation out of the next chunk of code to make sure that we correctly
// check PoW now.
// FIXME: height parameter is not used...should it be used or should it not
// be a parameter?
// validate proof_of_work versus difficulty target
# if defined(PER_BLOCK_CHECKPOINT)
if ( chain_height < m_blocks_hash_check . size ( ) )
{
const auto & expected_hash = m_blocks_hash_check [ chain_height ] ;
if ( expected_hash ! = crypto : : null_hash )
{
if ( blk_hash ! = expected_hash )
{
MERROR_VER ( " Block with id is INVALID: " < < blk_hash < < " , expected " < < expected_hash ) ;
result . valid = false ;
return result ;
}
result . per_block_checkpointed = true ;
}
else
{
MCINFO ( " verify " , " No pre-validated hash at height " < < chain_height < < " , verifying fully " ) ;
}
}
else
# endif
{
auto it = m_blocks_longhash_table . find ( blk_hash ) ;
if ( it ! = m_blocks_longhash_table . end ( ) )
{
result . precomputed = true ;
result . proof_of_work = it - > second ;
}
else
result . proof_of_work = get_block_longhash_w_blockchain ( m_nettype , this , blk , chain_height , 0 ) ;
}
}
// validate proof_of_work versus difficulty target
result . valid = check_hash ( result . proof_of_work , difficulty ) ;
if ( ! result . valid )
MGINFO_RED ( ( alt_block ? " Alternative block " : " Block " ) < < " with id: " < < blk_hash < < " \n does not have enough proof of work: " < < result . proof_of_work < < " at height " < < blk_height < < " , required difficulty: " < < difficulty ) ;
return result ;
}
2020-08-20 10:37:18 +02:00
bool Blockchain : : basic_block_checks ( cryptonote : : block const & blk , bool alt_block )
2014-10-07 01:46:25 +02:00
{
2020-08-20 10:37:18 +02:00
const crypto : : hash blk_hash = cryptonote : : get_block_hash ( blk ) ;
const uint64_t blk_height = cryptonote : : get_block_height ( blk ) ;
const uint64_t chain_height = get_current_blockchain_height ( ) ;
const uint8_t hf_version = get_current_hard_fork_version ( ) ;
2014-10-07 01:46:25 +02:00
2020-08-20 10:37:18 +02:00
if ( alt_block )
{
if ( cryptonote : : get_block_height ( blk ) = = 0 )
{
MERROR_VER ( " Block with id: " < < blk_hash < < " (as alternative), but miner tx says height is 0. " ) ;
return false ;
}
2014-10-07 01:46:25 +02:00
2020-08-20 10:37:18 +02:00
if ( ! m_checkpoints . is_alternative_block_allowed ( chain_height , blk_height , nullptr ) )
{
MERROR_VER ( " Block with id: " < < blk_hash < < " can't be accepted for alternative chain, block height: " < < blk_height < < " , chain height: " < < chain_height ) ;
return false ;
}
2017-07-24 16:25:46 +02:00
2020-08-20 10:37:18 +02:00
// this is a cheap test
if ( ! m_hardfork - > check_for_height ( blk , blk_height ) )
{
LOG_PRINT_L1 ( " Block with id: " < < blk_hash < < " , has old version: " < < + blk . major_version < < " , current: " < < + hf_version < < " for height " < < blk_height ) ;
return false ;
}
}
else
2015-12-14 06:40:16 +01:00
{
2020-08-20 10:37:18 +02:00
crypto : : hash top_hash = get_tail_id ( ) ;
if ( blk . prev_id ! = top_hash )
{
MGINFO_RED ( " Block with id: " < < blk_hash < < " , has wrong prev_id: " < < blk . prev_id < < " , expected: " < < top_hash ) ;
return false ;
}
for ( static bool seen_future_version = false ;
! seen_future_version & & blk . major_version > m_hardfork - > get_ideal_version ( ) ;
seen_future_version = true )
{
const el : : Level level = el : : Level : : Warning ;
MCLOG_RED ( level , " global " , " ********************************************************************** " ) ;
MCLOG_RED ( level , " global " , " A block was seen on the network with a version higher than the last " ) ;
MCLOG_RED ( level , " global " , " known one. This may be an old version of the daemon, and a software " ) ;
MCLOG_RED ( level , " global " , " update may be required to sync further. Try running: update check " ) ;
MCLOG_RED ( level , " global " , " ********************************************************************** " ) ;
}
if ( ! m_hardfork - > check ( blk ) )
{
MGINFO_RED ( " Block with id: " < < blk_hash < < " , has old version: " < < + blk . major_version < < " , current: " < < ( unsigned ) m_hardfork - > get_current_version ( ) ) ;
return false ;
}
// If we're at a checkpoint, ensure that our hardcoded checkpoint hash
// is correct.
if ( m_checkpoints . is_in_checkpoint_zone ( chain_height ) )
{
bool service_node_checkpoint = false ;
if ( ! m_checkpoints . check_block ( chain_height , blk_hash , nullptr , & service_node_checkpoint ) )
{
if ( ! service_node_checkpoint | | ( service_node_checkpoint & & blk . major_version > = cryptonote : : network_version_13_enforce_checkpoints ) )
{
MGINFO_RED ( " CHECKPOINT VALIDATION FAILED " ) ;
return false ;
}
}
}
2014-10-07 01:46:25 +02:00
2020-08-25 08:17:56 +02:00
// make sure block timestamp is not less than the median timestamp of a set
// number of the most recent blocks.
if ( ! check_block_timestamp ( blk ) )
{
MGINFO_RED ( " Block with id: " < < blk_hash < < " , has invalid timestamp: " < < blk . timestamp ) ;
return false ;
}
2017-07-24 16:25:46 +02:00
}
2020-08-25 08:17:56 +02:00
// When verifying an alt block, we're replacing the blk at blk_height, not
// adding a new block to the chain
2020-08-20 10:37:18 +02:00
// sanity check basic miner tx properties;
2020-08-25 08:17:56 +02:00
if ( ! prevalidate_miner_transaction ( blk , alt_block ? blk_height : chain_height , hf_version ) )
2015-12-14 06:40:16 +01:00
{
2020-08-20 10:37:18 +02:00
MGINFO_RED ( " Block with id: " < < blk_hash < < " failed to pass prevalidation " ) ;
2019-10-17 18:04:03 +02:00
return false ;
2015-12-14 06:40:16 +01:00
}
2014-10-07 01:46:25 +02:00
2020-08-20 10:37:18 +02:00
return true ;
}
//------------------------------------------------------------------
// Needs to validate the block and acquire each transaction from the
// transaction mem_pool, then pass the block and transactions to
// m_db->add_block()
bool Blockchain : : handle_block_to_main_chain ( const block & bl , const crypto : : hash & id , block_verification_context & bvc , checkpoint_t const * checkpoint , bool notify )
{
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2014-10-07 01:46:25 +02:00
2020-08-20 10:37:18 +02:00
TIME_MEASURE_START ( block_processing_time ) ;
std : : unique_lock lock { * this } ;
db_rtxn_guard rtxn_guard ( m_db ) ;
TIME_MEASURE_START ( t1 ) ;
if ( ! basic_block_checks ( bl , false /*alt_block*/ ) )
2015-12-14 06:40:16 +01:00
{
bvc . m_verifivation_failed = true ;
2019-10-17 18:04:03 +02:00
return false ;
2015-12-14 06:40:16 +01:00
}
2020-08-20 10:37:18 +02:00
TIME_MEASURE_FINISH ( t1 ) ;
2015-12-14 06:40:16 +01:00
2020-08-20 10:37:18 +02:00
uint64_t const chain_height = get_current_blockchain_height ( ) ;
2020-08-27 07:21:44 +02:00
struct
2020-08-20 04:02:26 +02:00
{
2020-08-27 07:21:44 +02:00
uint64_t verify_pow_time ;
uint64_t difficulty_calc_time ;
difficulty_type current_diffic ;
block_pow_verified blk_pow = { } ;
} miner = { } ;
2015-12-14 06:40:16 +01:00
2020-08-27 09:43:08 +02:00
bool const pulse_block = cryptonote : : block_has_pulse_components ( bl ) ;
if ( pulse_block )
2020-08-27 07:21:44 +02:00
{
// NOTE: Pulse blocks don't use PoW. They use Service Node signatures.
// Delay signature verification until Service Node List adds the block in
// the block_added hook.
}
else // check proof of work
{
miner . difficulty_calc_time = epee : : misc_utils : : get_tick_count ( ) ;
miner . current_diffic = get_difficulty_for_next_block ( ) ;
miner . difficulty_calc_time = epee : : misc_utils : : get_tick_count ( ) - miner . difficulty_calc_time ;
2020-08-20 04:02:26 +02:00
2020-08-27 07:21:44 +02:00
miner . verify_pow_time = epee : : misc_utils : : get_tick_count ( ) ;
miner . blk_pow = verify_block_pow ( bl , miner . current_diffic , chain_height , false /*alt_block*/ ) ;
miner . verify_pow_time = epee : : misc_utils : : get_tick_count ( ) - miner . verify_pow_time ;
2014-10-07 01:46:25 +02:00
2020-08-27 07:21:44 +02:00
if ( ! miner . blk_pow . valid )
2020-08-20 09:08:17 +02:00
{
bvc . m_verifivation_failed = true ;
return false ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2020-08-27 07:21:44 +02:00
if ( miner . blk_pow . precomputed )
miner . verify_pow_time + = m_fake_pow_calc_time ;
2020-08-20 04:21:18 +02:00
}
2020-08-20 09:08:17 +02:00
2020-08-20 10:37:18 +02:00
size_t const coinbase_weight = get_transaction_weight ( bl . miner_tx ) ;
2018-07-18 23:24:53 +02:00
size_t cumulative_block_weight = coinbase_weight ;
2014-10-07 01:46:25 +02:00
2018-11-11 15:51:03 +01:00
std : : vector < std : : pair < transaction , blobdata > > txs ;
2015-12-14 06:40:16 +01:00
key_images_container keys ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
uint64_t fee_summary = 0 ;
uint64_t t_checktx = 0 ;
uint64_t t_exists = 0 ;
uint64_t t_pool = 0 ;
uint64_t t_dblspnd = 0 ;
2014-10-07 01:46:25 +02:00
2015-08-15 19:46:19 +02:00
// XXX old code adds miner tx here
2017-09-20 11:46:13 +02:00
size_t tx_index = 0 ;
2015-12-14 06:40:16 +01:00
// Iterate over the block's transaction hashes, grabbing each
// from the tx_pool and validating them. Each is then added
// to txs. Keys spent in each are added to <keys> by the double spend check.
2018-04-16 01:16:02 +02:00
txs . reserve ( bl . tx_hashes . size ( ) ) ;
2015-12-14 06:40:16 +01:00
for ( const crypto : : hash & tx_id : bl . tx_hashes )
{
2018-11-20 17:24:12 +01:00
transaction tx_tmp ;
2018-11-11 15:51:03 +01:00
blobdata txblob ;
2018-07-18 23:24:53 +02:00
size_t tx_weight = 0 ;
2015-12-14 06:40:16 +01:00
uint64_t fee = 0 ;
2017-09-22 14:57:20 +02:00
bool relayed = false , do_not_relay = false , double_spend_seen = false ;
2015-12-14 06:40:16 +01:00
TIME_MEASURE_START ( aa ) ;
2014-10-07 01:46:25 +02:00
2015-08-15 19:46:19 +02:00
// XXX old code does not check whether tx exists
2015-12-14 06:40:16 +01:00
if ( m_db - > tx_exists ( tx_id ) )
{
2020-08-20 03:21:40 +02:00
MGINFO_RED ( " Block with id: " < < id < < " attempting to add transaction already in blockchain with id: " < < tx_id ) ;
2015-12-14 06:40:16 +01:00
bvc . m_verifivation_failed = true ;
blockchain: fix a few block addition bugs
If the block reward was too high, the verification failed flag
was set, but the function continued. The code which was supposed
to trap this flag and return failure failed to trap it, and,
while the block was not added to the chain, the function would
return success.
The reason for avoiding returning when the block reward problem
was detected was to be able to return any transactions to the
pool if needed. This is now mooted by moving the transaction
return code to a separate function, which is now called at all
appropriate points, making the logic much simpler, and hopefully
correct now.
We also move the hard fork version check after the prev_id check,
as block which does not go on the top of the chain might not
have the expected version there, without being invalid just for
this reason.
Last, we trap the case where a block fails to be added due to
using already spent key images, to set the verification failed
flag.
2015-12-25 23:13:38 +01:00
return_tx_to_pool ( txs ) ;
2019-10-17 18:04:03 +02:00
return false ;
2015-12-14 06:40:16 +01:00
}
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
TIME_MEASURE_FINISH ( aa ) ;
t_exists + = aa ;
TIME_MEASURE_START ( bb ) ;
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
// get transaction with hash <tx_id> from tx_pool
2018-11-20 17:24:12 +01:00
if ( ! m_tx_pool . take_tx ( tx_id , tx_tmp , txblob , tx_weight , fee , relayed , do_not_relay , double_spend_seen ) )
2015-12-14 06:40:16 +01:00
{
2020-08-20 03:21:40 +02:00
MGINFO_RED ( " Block with id: " < < id < < " has at least one unknown transaction with id: " < < tx_id ) ;
2015-12-14 06:40:16 +01:00
bvc . m_verifivation_failed = true ;
blockchain: fix a few block addition bugs
If the block reward was too high, the verification failed flag
was set, but the function continued. The code which was supposed
to trap this flag and return failure failed to trap it, and,
while the block was not added to the chain, the function would
return success.
The reason for avoiding returning when the block reward problem
was detected was to be able to return any transactions to the
pool if needed. This is now mooted by moving the transaction
return code to a separate function, which is now called at all
appropriate points, making the logic much simpler, and hopefully
correct now.
We also move the hard fork version check after the prev_id check,
as block which does not go on the top of the chain might not
have the expected version there, without being invalid just for
this reason.
Last, we trap the case where a block fails to be added due to
using already spent key images, to set the verification failed
flag.
2015-12-25 23:13:38 +01:00
return_tx_to_pool ( txs ) ;
2019-10-17 18:04:03 +02:00
return false ;
2015-12-14 06:40:16 +01:00
}
2014-10-07 01:46:25 +02:00
2015-12-14 06:40:16 +01:00
TIME_MEASURE_FINISH ( bb ) ;
t_pool + = bb ;
// add the transaction to the temp list of transactions, so we can either
// store the list of transactions all at once or return the ones we've
// taken from the tx_pool back to it if the block fails verification.
2018-11-20 17:24:12 +01:00
txs . push_back ( std : : make_pair ( std : : move ( tx_tmp ) , std : : move ( txblob ) ) ) ;
transaction & tx = txs . back ( ) . first ;
2015-12-14 06:40:16 +01:00
TIME_MEASURE_START ( dd ) ;
2016-03-25 07:22:06 +01:00
// FIXME: the storage should not be responsible for validation.
// If it does any, it is merely a sanity check.
// Validation is the purview of the Blockchain class
// - TW
//
2015-12-14 06:40:16 +01:00
// ND: this is not needed, db->add_block() checks for duplicate k_images and fails accordingly.
// if (!check_for_double_spend(tx, keys))
// {
// LOG_PRINT_L0("Double spend detected in transaction (id: " << tx_id);
// bvc.m_verifivation_failed = true;
// break;
// }
TIME_MEASURE_FINISH ( dd ) ;
t_dblspnd + = dd ;
TIME_MEASURE_START ( cc ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
# if defined(PER_BLOCK_CHECKPOINT)
2020-08-27 07:21:44 +02:00
if ( ! miner . blk_pow . per_block_checkpointed )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
# endif
2015-12-14 06:40:16 +01:00
{
// validate that transaction inputs and the keys spending them are correct.
2019-10-31 23:26:58 +01:00
tx_verification_context tvc { } ;
2016-03-27 13:35:36 +02:00
if ( ! check_tx_inputs ( tx , tvc ) )
2015-12-14 06:40:16 +01:00
{
2020-08-20 03:21:40 +02:00
MGINFO_RED ( " Block with id: " < < id < < " has at least one transaction (id: " < < tx_id < < " ) with wrong inputs. " ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2019-09-23 03:09:19 +02:00
add_block_as_invalid ( bl ) ;
2020-08-20 03:21:40 +02:00
MGINFO_RED ( " Block with id " < < id < < " added as invalid because of wrong inputs in transactions " ) ;
MGINFO_RED ( " tx_index " < < tx_index < < " , m_blocks_txs_check " < < m_blocks_txs_check . size ( ) < < " : " ) ;
2018-12-05 12:30:07 +01:00
for ( const auto & h : m_blocks_txs_check ) MERROR_VER ( " " < < h ) ;
2015-12-14 06:40:16 +01:00
bvc . m_verifivation_failed = true ;
blockchain: fix a few block addition bugs
If the block reward was too high, the verification failed flag
was set, but the function continued. The code which was supposed
to trap this flag and return failure failed to trap it, and,
while the block was not added to the chain, the function would
return success.
The reason for avoiding returning when the block reward problem
was detected was to be able to return any transactions to the
pool if needed. This is now mooted by moving the transaction
return code to a separate function, which is now called at all
appropriate points, making the logic much simpler, and hopefully
correct now.
We also move the hard fork version check after the prev_id check,
as block which does not go on the top of the chain might not
have the expected version there, without being invalid just for
this reason.
Last, we trap the case where a block fails to be added due to
using already spent key images, to set the verification failed
flag.
2015-12-25 23:13:38 +01:00
return_tx_to_pool ( txs ) ;
2019-10-17 18:04:03 +02:00
return false ;
2015-12-14 06:40:16 +01:00
}
}
# if defined(PER_BLOCK_CHECKPOINT)
else
2014-10-29 03:25:03 +01:00
{
2015-12-14 06:40:16 +01:00
// ND: if fast_check is enabled for blocks, there is no need to check
// the transaction inputs, but do some sanity checks anyway.
2017-09-20 11:46:13 +02:00
if ( tx_index > = m_blocks_txs_check . size ( ) | | memcmp ( & m_blocks_txs_check [ tx_index + + ] , & tx_id , sizeof ( tx_id ) ) ! = 0 )
2015-12-14 06:40:16 +01:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Block with id: " < < id < < " has at least one transaction (id: " < < tx_id < < " ) with wrong inputs. " ) ;
2019-09-23 03:09:19 +02:00
add_block_as_invalid ( bl ) ;
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " Block with id " < < id < < " added as invalid because of wrong inputs in transactions " ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
bvc . m_verifivation_failed = true ;
blockchain: fix a few block addition bugs
If the block reward was too high, the verification failed flag
was set, but the function continued. The code which was supposed
to trap this flag and return failure failed to trap it, and,
while the block was not added to the chain, the function would
return success.
The reason for avoiding returning when the block reward problem
was detected was to be able to return any transactions to the
pool if needed. This is now mooted by moving the transaction
return code to a separate function, which is now called at all
appropriate points, making the logic much simpler, and hopefully
correct now.
We also move the hard fork version check after the prev_id check,
as block which does not go on the top of the chain might not
have the expected version there, without being invalid just for
this reason.
Last, we trap the case where a block fails to be added due to
using already spent key images, to set the verification failed
flag.
2015-12-25 23:13:38 +01:00
return_tx_to_pool ( txs ) ;
2019-10-17 18:04:03 +02:00
return false ;
2015-12-14 06:40:16 +01:00
}
2014-10-29 03:25:03 +01:00
}
2015-12-14 06:40:16 +01:00
# endif
TIME_MEASURE_FINISH ( cc ) ;
t_checktx + = cc ;
fee_summary + = fee ;
2018-07-18 23:24:53 +02:00
cumulative_block_weight + = tx_weight ;
2015-12-14 06:40:16 +01:00
}
m_blocks_txs_check . clear ( ) ;
TIME_MEASURE_START ( vmt ) ;
uint64_t base_reward = 0 ;
2020-08-20 10:37:18 +02:00
uint64_t already_generated_coins = chain_height ? m_db - > get_block_already_generated_coins ( chain_height - 1 ) : 0 ;
2019-10-04 05:57:14 +02:00
if ( ! validate_miner_transaction ( bl , cumulative_block_weight , fee_summary , base_reward , already_generated_coins , m_hardfork - > get_current_version ( ) ) )
2015-12-14 06:40:16 +01:00
{
2020-08-20 03:21:40 +02:00
MGINFO_RED ( " Block with id: " < < id < < " has incorrect miner transaction " ) ;
2015-12-14 06:40:16 +01:00
bvc . m_verifivation_failed = true ;
blockchain: fix a few block addition bugs
If the block reward was too high, the verification failed flag
was set, but the function continued. The code which was supposed
to trap this flag and return failure failed to trap it, and,
while the block was not added to the chain, the function would
return success.
The reason for avoiding returning when the block reward problem
was detected was to be able to return any transactions to the
pool if needed. This is now mooted by moving the transaction
return code to a separate function, which is now called at all
appropriate points, making the logic much simpler, and hopefully
correct now.
We also move the hard fork version check after the prev_id check,
as block which does not go on the top of the chain might not
have the expected version there, without being invalid just for
this reason.
Last, we trap the case where a block fails to be added due to
using already spent key images, to set the verification failed
flag.
2015-12-25 23:13:38 +01:00
return_tx_to_pool ( txs ) ;
2019-10-17 18:04:03 +02:00
return false ;
2015-12-14 06:40:16 +01:00
}
TIME_MEASURE_FINISH ( vmt ) ;
2018-07-18 23:24:53 +02:00
size_t block_weight ;
2015-12-14 06:40:16 +01:00
difficulty_type cumulative_difficulty ;
// populate various metadata about the block to be stored alongside it.
2018-07-18 23:24:53 +02:00
block_weight = cumulative_block_weight ;
2020-08-27 07:21:44 +02:00
cumulative_difficulty = miner . current_diffic ;
2016-04-17 15:43:16 +02:00
// In the "tail" state when the minimum subsidy (implemented in get_block_reward) is in effect, the number of
// coins will eventually exceed MONEY_SUPPLY and overflow a uint64. To prevent overflow, cap already_generated_coins
// at MONEY_SUPPLY. already_generated_coins is only used to compute the block subsidy and MONEY_SUPPLY yields a
// subsidy of 0 under the base formula and therefore the minimum subsidy >0 in the tail state.
already_generated_coins = base_reward < ( MONEY_SUPPLY - already_generated_coins ) ? already_generated_coins + base_reward : MONEY_SUPPLY ;
2020-08-20 10:37:18 +02:00
if ( chain_height )
cumulative_difficulty + = m_db - > get_block_cumulative_difficulty ( chain_height - 1 ) ;
2015-12-14 06:40:16 +01:00
TIME_MEASURE_FINISH ( block_processing_time ) ;
2020-08-27 07:21:44 +02:00
if ( miner . blk_pow . precomputed )
2015-12-14 06:40:16 +01:00
block_processing_time + = m_fake_pow_calc_time ;
2019-04-05 11:28:30 +02:00
rtxn_guard . stop ( ) ;
2015-12-14 06:40:16 +01:00
TIME_MEASURE_START ( addblock ) ;
uint64_t new_height = 0 ;
if ( ! bvc . m_verifivation_failed )
{
try
2014-10-29 03:25:03 +01:00
{
2019-01-21 18:18:50 +01:00
uint64_t long_term_block_weight = get_next_long_term_block_weight ( block_weight ) ;
2018-11-21 13:57:51 +01:00
cryptonote : : blobdata bd = cryptonote : : block_to_blob ( bl ) ;
new_height = m_db - > add_block ( std : : make_pair ( std : : move ( bl ) , std : : move ( bd ) ) , block_weight , long_term_block_weight , cumulative_difficulty , already_generated_coins , txs ) ;
2014-10-29 03:25:03 +01:00
}
blockchain: fix a few block addition bugs
If the block reward was too high, the verification failed flag
was set, but the function continued. The code which was supposed
to trap this flag and return failure failed to trap it, and,
while the block was not added to the chain, the function would
return success.
The reason for avoiding returning when the block reward problem
was detected was to be able to return any transactions to the
pool if needed. This is now mooted by moving the transaction
return code to a separate function, which is now called at all
appropriate points, making the logic much simpler, and hopefully
correct now.
We also move the hard fork version check after the prev_id check,
as block which does not go on the top of the chain might not
have the expected version there, without being invalid just for
this reason.
Last, we trap the case where a block fails to be added due to
using already spent key images, to set the verification failed
flag.
2015-12-25 23:13:38 +01:00
catch ( const KEY_IMAGE_EXISTS & e )
{
2020-08-20 03:21:40 +02:00
MGINFO_RED ( " Error adding block with hash: " < < id < < " to blockchain, what = " < < e . what ( ) ) ;
2019-05-24 10:33:19 +02:00
m_batch_success = false ;
blockchain: fix a few block addition bugs
If the block reward was too high, the verification failed flag
was set, but the function continued. The code which was supposed
to trap this flag and return failure failed to trap it, and,
while the block was not added to the chain, the function would
return success.
The reason for avoiding returning when the block reward problem
was detected was to be able to return any transactions to the
pool if needed. This is now mooted by moving the transaction
return code to a separate function, which is now called at all
appropriate points, making the logic much simpler, and hopefully
correct now.
We also move the hard fork version check after the prev_id check,
as block which does not go on the top of the chain might not
have the expected version there, without being invalid just for
this reason.
Last, we trap the case where a block fails to be added due to
using already spent key images, to set the verification failed
flag.
2015-12-25 23:13:38 +01:00
bvc . m_verifivation_failed = true ;
return_tx_to_pool ( txs ) ;
return false ;
}
2015-12-14 06:40:16 +01:00
catch ( const std : : exception & e )
2014-10-07 01:46:25 +02:00
{
2015-12-14 06:40:16 +01:00
//TODO: figure out the best way to deal with this failure
2020-08-20 03:21:40 +02:00
MGINFO_RED ( " Error adding block with hash: " < < id < < " to blockchain, what = " < < e . what ( ) ) ;
2019-05-24 10:33:19 +02:00
m_batch_success = false ;
2018-06-27 19:34:15 +02:00
bvc . m_verifivation_failed = true ;
blockchain: fix a few block addition bugs
If the block reward was too high, the verification failed flag
was set, but the function continued. The code which was supposed
to trap this flag and return failure failed to trap it, and,
while the block was not added to the chain, the function would
return success.
The reason for avoiding returning when the block reward problem
was detected was to be able to return any transactions to the
pool if needed. This is now mooted by moving the transaction
return code to a separate function, which is now called at all
appropriate points, making the logic much simpler, and hopefully
correct now.
We also move the hard fork version check after the prev_id check,
as block which does not go on the top of the chain might not
have the expected version there, without being invalid just for
this reason.
Last, we trap the case where a block fails to be added due to
using already spent key images, to set the verification failed
flag.
2015-12-25 23:13:38 +01:00
return_tx_to_pool ( txs ) ;
return false ;
2015-12-14 06:40:16 +01:00
}
}
blockchain: fix a few block addition bugs
If the block reward was too high, the verification failed flag
was set, but the function continued. The code which was supposed
to trap this flag and return failure failed to trap it, and,
while the block was not added to the chain, the function would
return success.
The reason for avoiding returning when the block reward problem
was detected was to be able to return any transactions to the
pool if needed. This is now mooted by moving the transaction
return code to a separate function, which is now called at all
appropriate points, making the logic much simpler, and hopefully
correct now.
We also move the hard fork version check after the prev_id check,
as block which does not go on the top of the chain might not
have the expected version there, without being invalid just for
this reason.
Last, we trap the case where a block fails to be added due to
using already spent key images, to set the verification failed
flag.
2015-12-25 23:13:38 +01:00
else
2015-12-14 06:40:16 +01:00
{
2020-08-20 03:21:40 +02:00
MGINFO_RED ( " Blocks that failed verification should not reach here " ) ;
2015-12-14 06:40:16 +01:00
}
2014-10-07 01:46:25 +02:00
2019-12-15 23:49:35 +01:00
auto abort_block = loki : : defer ( [ & ] ( ) {
pop_block_from_blockchain ( ) ;
auto old_height = m_db - > height ( ) ;
for ( BlockchainDetachedHook * hook : m_blockchain_detached_hooks )
hook - > blockchain_detached ( old_height , false /*by_pop_blocks*/ ) ;
} ) ;
2019-04-11 07:08:26 +02:00
// TODO(loki): Not nice, making the hook take in a vector of pair<transaction,
// blobdata> messes with service_node_list::init which only constructs
// a vector of transactions and then subsequently calls block_added, so the
// init step would have to intentionally allocate the blobs or retrieve them
// from the DB.
// Secondly we don't use the blobs at all in the hooks, so passing it in
// doesn't seem right.
std : : vector < transaction > only_txs ;
only_txs . reserve ( txs . size ( ) ) ;
for ( std : : pair < transaction , blobdata > const & tx_pair : txs )
only_txs . push_back ( tx_pair . first ) ;
2020-06-19 05:30:16 +02:00
if ( ! m_service_node_list . block_added ( bl , only_txs , checkpoint ) )
{
2020-08-20 03:21:40 +02:00
MGINFO_RED ( " Failed to add block to Service Node List. " ) ;
2020-06-23 04:35:30 +02:00
bvc . m_verifivation_failed = true ;
2020-06-19 05:30:16 +02:00
return false ;
}
if ( ! m_lns_db . add_block ( bl , only_txs ) )
{
2020-08-20 03:21:40 +02:00
MGINFO_RED ( " Failed to add block to LNS DB. " ) ;
2020-06-23 04:35:30 +02:00
bvc . m_verifivation_failed = true ;
2020-06-19 05:30:16 +02:00
return false ;
}
2019-11-27 03:15:06 +01:00
2018-06-29 06:47:00 +02:00
for ( BlockAddedHook * hook : m_block_added_hooks )
2019-08-28 07:54:02 +02:00
{
if ( ! hook - > block_added ( bl , only_txs , checkpoint ) )
{
2020-08-20 03:21:40 +02:00
MGINFO_RED ( " Block added hook signalled failure " ) ;
2020-06-23 04:35:30 +02:00
bvc . m_verifivation_failed = true ;
2019-08-28 07:54:02 +02:00
return false ;
}
}
2018-06-29 06:47:00 +02:00
2015-12-14 06:40:16 +01:00
TIME_MEASURE_FINISH ( addblock ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2019-09-13 07:46:15 +02:00
// TODO(loki): Temporary forking code.
2019-09-10 02:04:44 +02:00
{
2019-09-13 07:46:15 +02:00
// Rescan difficulty every N block we have a reocurring difficulty bug that causes daemons to miscalculate difficulty
2019-10-30 04:50:34 +01:00
uint64_t block_height = get_block_height ( bl ) ;
2019-09-13 07:46:15 +02:00
if ( nettype ( ) = = MAINNET & & ( block_height % BLOCKS_EXPECTED_IN_DAYS ( 1 ) = = 0 ) )
{
cryptonote : : BlockchainDB : : fixup_context context = { } ;
2020-08-31 09:45:33 +02:00
context . nettype = m_nettype ;
2020-08-27 09:43:08 +02:00
context . recalc_diff . start_height = block_height - BLOCKS_EXPECTED_IN_DAYS ( 1 ) ;
2019-09-13 07:46:15 +02:00
m_db - > fixup ( context ) ;
2019-09-10 02:04:44 +02:00
}
}
2018-07-18 23:24:53 +02:00
// do this after updating the hard fork state since the weight limit may change due to fork
2019-02-15 14:01:56 +01:00
if ( ! update_next_cumulative_weight_limit ( ) )
{
2020-08-20 03:21:40 +02:00
MGINFO_RED ( " Failed to update next cumulative weight limit " ) ;
2019-02-15 14:01:56 +01:00
return false ;
}
2015-11-05 10:58:47 +01:00
2019-12-15 23:49:35 +01:00
abort_block . cancel ( ) ;
2020-07-16 06:08:29 +02:00
if ( bl . signatures . size ( ) = = service_nodes : : PULSE_BLOCK_REQUIRED_SIGNATURES )
2020-07-09 06:51:44 +02:00
{
MINFO ( " +++++ PULSE BLOCK SUCCESSFULLY ADDED \n "
< < " id: \t " < < id < < " \n "
< < " HEIGHT " < < new_height - 1 < < " \n "
< < " block reward: " < < print_money ( fee_summary + base_reward ) < < " ( " < < print_money ( base_reward )
< < " + " < < print_money ( fee_summary ) < < " ), coinbase_weight: " < < coinbase_weight
2020-08-27 07:21:44 +02:00
< < " , cumulative weight: " < < cumulative_block_weight < < " , " < < block_processing_time ) ;
2020-07-09 06:51:44 +02:00
}
else
{
2020-07-28 05:53:19 +02:00
assert ( bl . signatures . empty ( ) & & " Signatures were supposed to be checked in Service Node List already. " ) ;
2020-07-09 06:51:44 +02:00
MINFO ( " +++++ MINER BLOCK SUCCESSFULLY ADDED \n "
2020-08-20 10:37:18 +02:00
< < " id: \t " < < id < < " \n "
2020-08-27 07:21:44 +02:00
< < " PoW: \t " < < miner . blk_pow . proof_of_work < < " \n "
< < " HEIGHT " < < new_height - 1 < < " , difficulty: \t " < < miner . current_diffic < < " \n "
2020-08-20 10:37:18 +02:00
< < " block reward: " < < print_money ( fee_summary + base_reward ) < < " ( " < < print_money ( base_reward ) < < " + "
< < print_money ( fee_summary ) < < " ), coinbase_weight: " < < coinbase_weight
< < " , cumulative weight: " < < cumulative_block_weight < < " , " < < block_processing_time < < " ( "
2020-08-27 07:21:44 +02:00
< < miner . difficulty_calc_time < < " / " < < miner . verify_pow_time < < " )ms " ) ;
2020-07-09 06:51:44 +02:00
}
2015-12-14 06:40:16 +01:00
if ( m_show_time_stats )
{
2018-07-18 23:24:53 +02:00
MINFO ( " Height: " < < new_height < < " coinbase weight: " < < coinbase_weight < < " cumm: "
< < cumulative_block_weight < < " p/t: " < < block_processing_time < < " ( "
2020-08-27 07:21:44 +02:00
< < miner . difficulty_calc_time < < " / " < < miner . verify_pow_time < < " / "
2020-08-20 10:37:18 +02:00
< < t1 < < " / " < < t_exists < < " / " < < t_pool
2015-12-14 06:40:16 +01:00
< < " / " < < t_checktx < < " / " < < t_dblspnd < < " / " < < vmt < < " / " < < addblock < < " )ms " ) ;
}
2014-10-07 01:46:25 +02:00
2019-04-11 07:08:26 +02:00
2015-12-14 06:40:16 +01:00
bvc . m_added_to_main_chain = true ;
+ + m_sync_counter ;
2014-10-07 01:46:25 +02:00
2019-10-27 23:26:38 +01:00
m_tx_pool . on_blockchain_inc ( bl ) ;
2020-08-31 09:45:33 +02:00
get_difficulty_for_next_block ( ) ; // just to cache it
2016-04-17 12:04:01 +02:00
invalidate_block_template_cache ( ) ;
Version 0.4.0 Release Candidate (#216)
* core: submit uptime proof immediately after registering
* Increase visibility of autostaking prompts
* quorum_cop: changed uptime proof prune timeout to 2 hours 10 minutes
* cleanup: removed scope limiting block
* check_tx_inputs: fix deregister double spend test to include deregisters from other heights
* config: new testnet network id, genesis tx, and version bump
* wallet2: fix testnet wallet blockheight approximation
* Fix change in address format in RPC which broke parsing and pooling contributors (#184)
* Fix service node endpoints for RPC to also use stdout (#185)
* fixed some further rct core tests (#180)
* Fix service node state by calling detached hooks on failure to switch to alt chain (#188)
* fixed block verification core tests (#186)
* fixed block verification core tests
* core tests: removed gen_block_miner_tx_out_is_small which is only relevant to hardfork version 1
* Don't consider expired deregistrations when filling block template
* Add unit tests for getting staking requirement (#191)
* First service node test (#190)
* core_tests: added service node tests
* core_tests: check balance after registration tx
* Fix underflow for popping rollback events (#189)
* Move deregistration age check into check_tx_inputs
* Zero initialise rct_signatures member txnFee is a uint64_t and has uninit values
* Enforce that deregisters must be 0 fee since we skip checks
* Add unit tests for vote validation (#193)
* Add unit tests for deregistration validation (#194)
* Mainnet checkpoint 86535, testnet 3591, 4166
* Bump version number
* Add print_sr for getting staking requirement (#198)
* Misc bugfixes (#203)
* removed unnecessary cast to double during txfee+coinbase calculation
* simplewallet: increased autostaking interval from 2 minutes to 40
* Fix casting issues from uint to int (#204)
* core_tests: check service node registration and expiration (#195)
* core_tests: check service node registration and deregistration
* core_tests for service nodes:
- include service nodes rewards when calculating account's balance
- check that service nodes rewards have been received
* fixed namespace error; reduced the scope of staking requirement constants
* On blockchain inc/dec mark deregisters relayble based on age (#201)
* Service nodes restore only 1 rollback bug (#206)
* Fix restore 1 rollback event, ensure prevent rollback is always added
* Remove adding prevent_rollback event at init
It gets called in on block added generic anyway.
* Log db exception, fix relation operators for vote/deregister lifetime (#207)
* Filter relayable deregisters w/ check_tx_inputs instead of blockchain callbacks
* Bump version to 0.3.7-beta
* fix build with GCC 8.1.0 (#211)
* Add temp hardfork rule in testnet for deregister lifetimes (#210)
* Update testnet, remove testnet forks, remove checkpoints, update blockheight estimate (#212)
* Don't ban peers for a bad vote, just drop their connection (#213)
* Update to version 0.3.0 release candidate (#215)
2018-09-07 07:14:28 +02:00
2020-02-19 16:17:43 +01:00
if ( notify )
{
std : : shared_ptr < tools : : Notify > block_notify = m_block_notify ;
if ( block_notify )
block_notify - > notify ( " %s " , epee : : string_tools : : pod_to_hex ( id ) . c_str ( ) , NULL ) ;
}
2018-09-29 22:18:08 +02:00
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
bool Blockchain : : prune_blockchain ( uint32_t pruning_seed )
{
2019-12-24 18:36:52 +01:00
auto lock = tools : : unique_locks ( m_tx_pool , * this ) ;
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
return m_db - > prune_blockchain ( pruning_seed ) ;
}
//------------------------------------------------------------------
bool Blockchain : : update_blockchain_pruning ( )
{
2019-12-24 18:36:52 +01:00
auto lock = tools : : unique_locks ( m_tx_pool , * this ) ;
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
return m_db - > update_pruning ( ) ;
}
//------------------------------------------------------------------
bool Blockchain : : check_blockchain_pruning ( )
{
2019-12-24 18:36:52 +01:00
auto lock = tools : : unique_locks ( m_tx_pool , * this ) ;
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
return m_db - > check_pruning ( ) ;
}
//------------------------------------------------------------------
2019-01-21 18:18:50 +01:00
uint64_t Blockchain : : get_next_long_term_block_weight ( uint64_t block_weight ) const
2014-10-07 01:46:25 +02:00
{
2019-01-21 18:18:50 +01:00
PERF_TIMER ( get_next_long_term_block_weight ) ;
2019-02-19 12:00:27 +01:00
const uint64_t db_height = m_db - > height ( ) ;
const uint64_t nblocks = std : : min < uint64_t > ( m_long_term_block_weights_window , db_height ) ;
2019-01-21 18:18:50 +01:00
const uint8_t hf_version = get_current_hard_fork_version ( ) ;
if ( hf_version < HF_VERSION_LONG_TERM_BLOCK_WEIGHT )
return block_weight ;
2019-04-15 02:33:17 +02:00
uint64_t long_term_median = get_long_term_block_weight_median ( db_height - nblocks , nblocks ) ;
2019-01-21 18:18:50 +01:00
uint64_t long_term_effective_median_block_weight = std : : max < uint64_t > ( CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5 , long_term_median ) ;
uint64_t short_term_constraint = long_term_effective_median_block_weight + long_term_effective_median_block_weight * 2 / 5 ;
uint64_t long_term_block_weight = std : : min < uint64_t > ( block_weight , short_term_constraint ) ;
return long_term_block_weight ;
}
//------------------------------------------------------------------
bool Blockchain : : update_next_cumulative_weight_limit ( uint64_t * long_term_effective_median_block_weight )
{
PERF_TIMER ( update_next_cumulative_weight_limit ) ;
2015-11-05 10:58:47 +01:00
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
2014-10-07 01:46:25 +02:00
2019-01-21 18:18:50 +01:00
// when we reach this, the last hf version is not yet written to the db
const uint64_t db_height = m_db - > height ( ) ;
2019-02-19 12:00:27 +01:00
const uint8_t hf_version = get_current_hard_fork_version ( ) ;
2019-01-21 18:18:50 +01:00
uint64_t full_reward_zone = get_min_block_weight ( hf_version ) ;
if ( hf_version < HF_VERSION_LONG_TERM_BLOCK_WEIGHT )
{
2019-02-25 08:33:06 +01:00
std : : vector < uint64_t > weights ;
2019-01-21 18:18:50 +01:00
get_last_n_blocks_weights ( weights , CRYPTONOTE_REWARD_BLOCKS_WINDOW ) ;
m_current_block_cumul_weight_median = epee : : misc_utils : : median ( weights ) ;
}
else
{
const uint64_t block_weight = m_db - > get_block_weight ( db_height - 1 ) ;
2019-02-27 00:34:15 +01:00
uint64_t long_term_median ;
if ( db_height = = 1 )
{
long_term_median = CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5 ;
}
else
2019-02-26 06:30:33 +01:00
{
2019-03-05 02:25:39 +01:00
uint64_t nblocks = std : : min < uint64_t > ( m_long_term_block_weights_window , db_height ) ;
if ( nblocks = = db_height )
- - nblocks ;
2019-04-15 02:33:17 +02:00
long_term_median = get_long_term_block_weight_median ( db_height - nblocks - 1 , nblocks ) ;
2019-02-26 06:30:33 +01:00
}
2019-02-19 12:00:27 +01:00
m_long_term_effective_median_block_weight = std : : max < uint64_t > ( CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5 , long_term_median ) ;
2019-01-21 18:18:50 +01:00
2019-02-19 12:00:27 +01:00
uint64_t short_term_constraint = m_long_term_effective_median_block_weight + m_long_term_effective_median_block_weight * 2 / 5 ;
2019-04-29 18:53:38 +02:00
uint64_t long_term_block_weight = std : : min < uint64_t > ( block_weight , short_term_constraint ) ;
2019-01-21 18:18:50 +01:00
2019-04-15 02:33:17 +02:00
if ( db_height = = 1 )
{
long_term_median = long_term_block_weight ;
}
else
{
m_long_term_block_weights_cache_tip_hash = m_db - > get_block_hash_from_height ( db_height - 1 ) ;
m_long_term_block_weights_cache_rolling_median . insert ( long_term_block_weight ) ;
long_term_median = m_long_term_block_weights_cache_rolling_median . median ( ) ;
}
2019-02-19 12:00:27 +01:00
m_long_term_effective_median_block_weight = std : : max < uint64_t > ( CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5 , long_term_median ) ;
2019-01-21 18:18:50 +01:00
2019-04-15 02:33:17 +02:00
std : : vector < uint64_t > weights ;
2019-01-21 18:18:50 +01:00
get_last_n_blocks_weights ( weights , CRYPTONOTE_REWARD_BLOCKS_WINDOW ) ;
uint64_t short_term_median = epee : : misc_utils : : median ( weights ) ;
2019-02-19 12:00:27 +01:00
uint64_t effective_median_block_weight = std : : min < uint64_t > ( std : : max < uint64_t > ( CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE_V5 , short_term_median ) , CRYPTONOTE_SHORT_TERM_BLOCK_WEIGHT_SURGE_FACTOR * m_long_term_effective_median_block_weight ) ;
2019-01-21 18:18:50 +01:00
m_current_block_cumul_weight_median = effective_median_block_weight ;
}
if ( m_current_block_cumul_weight_median < = full_reward_zone )
m_current_block_cumul_weight_median = full_reward_zone ;
m_current_block_cumul_weight_limit = m_current_block_cumul_weight_median * 2 ;
2014-10-07 01:46:25 +02:00
2019-02-19 12:00:27 +01:00
if ( long_term_effective_median_block_weight )
* long_term_effective_median_block_weight = m_long_term_effective_median_block_weight ;
2014-10-07 01:46:25 +02:00
2019-04-05 11:28:30 +02:00
if ( ! m_db - > is_read_only ( ) )
m_db - > add_max_block_size ( m_current_block_cumul_weight_limit ) ;
2019-04-04 02:15:57 +02:00
2015-12-14 06:40:16 +01:00
return true ;
2014-10-07 01:46:25 +02:00
}
//------------------------------------------------------------------
2019-06-26 06:00:05 +02:00
bool Blockchain : : add_new_block ( const block & bl , block_verification_context & bvc , checkpoint_t const * checkpoint )
2014-10-07 01:46:25 +02:00
{
2019-05-01 08:01:17 +02:00
2015-12-14 06:40:16 +01:00
LOG_PRINT_L3 ( " Blockchain:: " < < __func__ ) ;
crypto : : hash id = get_block_hash ( bl ) ;
2019-12-24 18:36:52 +01:00
auto lock = tools : : unique_locks ( m_tx_pool , * this ) ;
2019-04-05 11:28:30 +02:00
db_rtxn_guard rtxn_guard ( m_db ) ;
2015-12-14 06:40:16 +01:00
if ( have_block ( id ) )
{
LOG_PRINT_L3 ( " block with id = " < < id < < " already exists " ) ;
bvc . m_already_exists = true ;
2018-02-21 20:31:27 +01:00
m_blocks_txs_check . clear ( ) ;
2015-12-14 06:40:16 +01:00
return false ;
}
2014-10-07 01:46:25 +02:00
2019-06-26 06:00:05 +02:00
if ( checkpoint )
{
checkpoint_t existing_checkpoint ;
uint64_t block_height = get_block_height ( bl ) ;
try
{
2019-08-14 05:41:46 +02:00
if ( get_checkpoint ( block_height , existing_checkpoint ) )
2019-06-26 06:00:05 +02:00
{
if ( checkpoint - > signatures . size ( ) < existing_checkpoint . signatures . size ( ) )
checkpoint = nullptr ;
}
}
catch ( const std : : exception & e )
{
MERROR ( " Get block checkpoint from DB failed at height: " < < block_height < < " , what = " < < e . what ( ) ) ;
}
}
bool result = false ;
rtxn_guard . stop ( ) ;
2019-08-28 07:54:02 +02:00
if ( bl . prev_id = = get_tail_id ( ) ) //check that block refers to chain tail
{
result = handle_block_to_main_chain ( bl , id , bvc , checkpoint ) ;
}
else
2015-12-14 06:40:16 +01:00
{
//chain switching or wrong block
bvc . m_added_to_main_chain = false ;
2019-08-28 07:54:02 +02:00
result = handle_alternative_block ( bl , id , bvc , checkpoint ) ;
2018-02-21 20:31:27 +01:00
m_blocks_txs_check . clear ( ) ;
2015-12-14 06:40:16 +01:00
//never relay alternative blocks
}
2014-10-07 01:46:25 +02:00
2019-06-26 06:00:05 +02:00
return result ;
2014-10-07 01:46:25 +02:00
}
2014-11-02 00:03:37 +01:00
//------------------------------------------------------------------
2019-05-01 07:57:41 +02:00
// returns false if any of the checkpoints loading returns false.
// That should happen only if a checkpoint is added that conflicts
// with an existing checkpoint.
2019-07-11 06:16:55 +02:00
bool Blockchain : : update_checkpoints_from_json_file ( const std : : string & file_path )
2014-11-02 00:03:37 +01:00
{
2019-05-01 07:57:41 +02:00
std : : vector < height_to_hash > checkpoint_hashes ;
if ( ! cryptonote : : load_checkpoints_from_json ( file_path , checkpoint_hashes ) )
return false ;
2019-05-01 08:01:17 +02:00
2019-05-01 07:57:41 +02:00
std : : vector < height_to_hash > : : const_iterator first_to_check = checkpoint_hashes . end ( ) ;
std : : vector < height_to_hash > : : const_iterator one_past_last_to_check = checkpoint_hashes . end ( ) ;
uint64_t prev_max_height = m_checkpoints . get_max_height ( ) ;
LOG_PRINT_L1 ( " Adding checkpoints from blockchain hashfile: " < < file_path ) ;
LOG_PRINT_L1 ( " Hard-coded max checkpoint height is " < < prev_max_height ) ;
for ( std : : vector < height_to_hash > : : const_iterator it = checkpoint_hashes . begin ( ) ; it ! = one_past_last_to_check ; it + + )
2015-12-14 06:40:16 +01:00
{
2019-05-01 07:57:41 +02:00
uint64_t height ;
height = it - > height ;
if ( height < = prev_max_height ) {
LOG_PRINT_L1 ( " ignoring checkpoint height " < < height ) ;
} else {
if ( first_to_check = = checkpoint_hashes . end ( ) )
first_to_check = it ;
2019-05-01 08:01:17 +02:00
2019-05-01 07:57:41 +02:00
std : : string blockhash = it - > hash ;
LOG_PRINT_L1 ( " Adding checkpoint height " < < height < < " , hash= " < < blockhash ) ;
if ( ! m_checkpoints . add_checkpoint ( height , blockhash ) )
{
one_past_last_to_check = it ;
LOG_PRINT_L1 ( " Failed to add checkpoint at height " < < height < < " , hash= " < < blockhash ) ;
break ;
}
}
}
/*
* If a block fails a checkpoint the blockchain
* will be rolled back to two blocks prior to that block .
*/
//TODO: Refactor, consider returning a failure height and letting
// caller decide course of action.
bool result = true ;
{
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2019-05-01 07:57:41 +02:00
bool stop_batch = m_db - > batch_start ( ) ;
2014-11-02 00:03:37 +01:00
2019-05-01 07:57:41 +02:00
for ( std : : vector < height_to_hash > : : const_iterator it = first_to_check ; it ! = one_past_last_to_check ; it + + )
2015-12-14 06:40:16 +01:00
{
2019-05-01 07:57:41 +02:00
uint64_t block_height = it - > height ;
if ( block_height > = m_db - > height ( ) ) // if the checkpoint is for a block we don't have yet, move on
break ;
if ( ! m_checkpoints . check_block ( block_height , m_db - > get_block_hash_from_height ( block_height ) , nullptr ) )
2015-12-14 06:40:16 +01:00
{
2019-05-01 07:57:41 +02:00
// roll back to a couple of blocks before the checkpoint
2015-12-14 06:40:16 +01:00
LOG_ERROR ( " Local blockchain failed to pass a checkpoint, rolling back! " ) ;
2019-09-10 09:52:52 +02:00
std : : list < block_and_checkpoint > empty ;
2019-05-01 08:01:17 +02:00
rollback_blockchain_switching ( empty , block_height - 2 ) ;
2019-05-01 07:57:41 +02:00
result = false ;
2015-12-14 06:40:16 +01:00
}
2014-11-02 00:03:37 +01:00
}
2019-05-01 07:57:41 +02:00
if ( stop_batch )
m_db - > batch_stop ( ) ;
2015-12-14 06:40:16 +01:00
}
2019-05-01 08:01:17 +02:00
2019-05-01 07:57:41 +02:00
return result ;
2014-11-02 00:03:37 +01:00
}
//------------------------------------------------------------------
2019-05-31 03:06:42 +02:00
bool Blockchain : : update_checkpoint ( cryptonote : : checkpoint_t const & checkpoint )
2014-11-02 00:03:37 +01:00
{
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2019-08-12 01:49:14 +02:00
bool result = m_checkpoints . update_checkpoint ( checkpoint ) ;
2019-05-31 03:06:42 +02:00
return result ;
2019-05-01 08:01:17 +02:00
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
//------------------------------------------------------------------
2019-08-14 05:41:46 +02:00
bool Blockchain : : get_checkpoint ( uint64_t height , checkpoint_t & checkpoint ) const
{
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2019-08-14 05:41:46 +02:00
return m_checkpoints . get_checkpoint ( height , checkpoint ) ;
}
//------------------------------------------------------------------
2018-11-10 14:46:37 +01:00
void Blockchain : : block_longhash_worker ( uint64_t height , const epee : : span < const block > & blocks , std : : unordered_map < crypto : : hash , crypto : : hash > & map ) const
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2015-12-14 06:40:16 +01:00
TIME_MEASURE_START ( t ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
for ( const auto & block : blocks )
{
2016-12-04 13:27:45 +01:00
if ( m_cancel )
2019-05-01 08:01:17 +02:00
break ;
2015-12-14 06:40:16 +01:00
crypto : : hash id = get_block_hash ( block ) ;
2020-06-25 05:31:44 +02:00
crypto : : hash pow = get_block_longhash_w_blockchain ( m_nettype , this , block , height + + , 0 ) ;
2015-12-14 06:40:16 +01:00
map . emplace ( id , pow ) ;
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
TIME_MEASURE_FINISH ( t ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
//------------------------------------------------------------------
bool Blockchain : : cleanup_handle_incoming_blocks ( bool force_sync )
{
2017-08-29 16:43:32 +02:00
bool success = false ;
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MTRACE ( " Blockchain:: " < < __func__ ) ;
2015-12-14 06:40:16 +01:00
TIME_MEASURE_START ( t1 ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2017-08-29 16:43:32 +02:00
try
{
2019-05-24 10:33:19 +02:00
if ( m_batch_success )
m_db - > batch_stop ( ) ;
else
m_db - > batch_abort ( ) ;
2017-08-29 16:43:32 +02:00
success = true ;
}
catch ( const std : : exception & e )
{
MERROR ( " Exception in cleanup_handle_incoming_blocks: " < < e . what ( ) ) ;
}
if ( success & & m_sync_counter > 0 )
2015-12-14 06:40:16 +01:00
{
if ( force_sync )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2015-12-14 06:40:16 +01:00
if ( m_db_sync_mode ! = db_nosync )
store_blockchain ( ) ;
m_sync_counter = 0 ;
}
2018-08-01 12:09:35 +02:00
else if ( m_db_sync_threshold & & ( ( m_db_sync_on_blocks & & m_sync_counter > = m_db_sync_threshold ) | | ( ! m_db_sync_on_blocks & & m_bytes_to_sync > = m_db_sync_threshold ) ) )
2015-12-14 06:40:16 +01:00
{
2018-08-01 12:09:35 +02:00
MDEBUG ( " Sync threshold met, syncing " ) ;
2015-12-14 06:40:16 +01:00
if ( m_db_sync_mode = = db_async )
{
m_sync_counter = 0 ;
2018-08-01 12:09:35 +02:00
m_bytes_to_sync = 0 ;
2020-06-02 01:36:30 +02:00
m_async_service . dispatch ( [ this ] { return store_blockchain ( ) ; } ) ;
2015-12-14 06:40:16 +01:00
}
else if ( m_db_sync_mode = = db_sync )
{
store_blockchain ( ) ;
}
else // db_nosync
{
// DO NOTHING, not required to call sync.
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2015-12-14 06:40:16 +01:00
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
TIME_MEASURE_FINISH ( t1 ) ;
m_blocks_longhash_table . clear ( ) ;
m_scan_table . clear ( ) ;
m_blocks_txs_check . clear ( ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2017-09-13 22:03:04 +02:00
// when we're well clear of the precomputed hashes, free the memory
if ( ! m_blocks_hash_check . empty ( ) & & m_db - > height ( ) > m_blocks_hash_check . size ( ) + 4096 )
{
MINFO ( " Dumping block hashes, we're now 4k past " < < m_blocks_hash_check . size ( ) ) ;
m_blocks_hash_check . clear ( ) ;
m_blocks_hash_check . shrink_to_fit ( ) ;
}
2019-12-24 18:36:52 +01:00
unlock ( ) ;
2017-05-14 15:06:55 +02:00
m_tx_pool . unlock ( ) ;
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
2018-04-30 00:30:51 +02:00
update_blockchain_pruning ( ) ;
2017-08-29 16:43:32 +02:00
return success ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
//------------------------------------------------------------------
2018-12-24 16:35:42 +01:00
void Blockchain : : output_scan_worker ( const uint64_t amount , const std : : vector < uint64_t > & offsets , std : : vector < output_data_t > & outputs ) const
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2015-12-14 06:40:16 +01:00
try
{
2018-11-07 22:13:00 +01:00
m_db - > get_output_key ( epee : : span < const uint64_t > ( & amount , 1 ) , offsets , outputs , true ) ;
2015-12-14 06:40:16 +01:00
}
catch ( const std : : exception & e )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MERROR_VER ( " EXCEPTION: " < < e . what ( ) ) ;
2015-12-14 06:40:16 +01:00
}
catch ( . . . )
{
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2018-04-16 01:16:02 +02:00
uint64_t Blockchain : : prevalidate_block_hashes ( uint64_t height , const std : : vector < crypto : : hash > & hashes )
2017-09-13 22:03:04 +02:00
{
// new: . . . . . X X X X X . . . . . .
// pre: A A A A B B B B C C C C D D D D
// easy case: height >= hashes
if ( height > = m_blocks_hash_of_hashes . size ( ) * HASH_OF_HASHES_STEP )
return hashes . size ( ) ;
2018-02-10 12:25:00 +01:00
// if we're getting old blocks, we might have jettisoned the hashes already
if ( m_blocks_hash_check . empty ( ) )
return hashes . size ( ) ;
2017-09-13 22:03:04 +02:00
// find hashes encompassing those block
size_t first_index = height / HASH_OF_HASHES_STEP ;
size_t last_index = ( height + hashes . size ( ) - 1 ) / HASH_OF_HASHES_STEP ;
MDEBUG ( " Blocks " < < height < < " - " < < ( height + hashes . size ( ) - 1 ) < < " start at " < < first_index < < " and end at " < < last_index ) ;
// case of not enough to calculate even a single hash
if ( first_index = = last_index & & hashes . size ( ) < HASH_OF_HASHES_STEP & & ( height + hashes . size ( ) ) % HASH_OF_HASHES_STEP )
return hashes . size ( ) ;
// build hashes vector to hash hashes together
std : : vector < crypto : : hash > data ;
data . reserve ( hashes . size ( ) + HASH_OF_HASHES_STEP - 1 ) ; // may be a bit too much
// we expect height to be either equal or a bit below db height
bool disconnected = ( height > m_db - > height ( ) ) ;
size_t pop ;
if ( disconnected & & height % HASH_OF_HASHES_STEP )
{
+ + first_index ;
pop = HASH_OF_HASHES_STEP - height % HASH_OF_HASHES_STEP ;
}
else
{
// we might need some already in the chain for the first part of the first hash
for ( uint64_t h = first_index * HASH_OF_HASHES_STEP ; h < height ; + + h )
{
data . push_back ( m_db - > get_block_hash_from_height ( h ) ) ;
}
pop = 0 ;
}
// push the data to check
for ( const auto & h : hashes )
{
if ( pop )
- - pop ;
else
data . push_back ( h ) ;
}
// hash and check
uint64_t usable = first_index * HASH_OF_HASHES_STEP - height ; // may start negative, but unsigned under/overflow is not UB
for ( size_t n = first_index ; n < = last_index ; + + n )
{
if ( n < m_blocks_hash_of_hashes . size ( ) )
{
// if the last index isn't fully filled, we can't tell if valid
if ( data . size ( ) < ( n - first_index ) * HASH_OF_HASHES_STEP + HASH_OF_HASHES_STEP )
break ;
crypto : : hash hash ;
cn_fast_hash ( data . data ( ) + ( n - first_index ) * HASH_OF_HASHES_STEP , HASH_OF_HASHES_STEP * sizeof ( crypto : : hash ) , hash ) ;
bool valid = hash = = m_blocks_hash_of_hashes [ n ] ;
// add to the known hashes array
if ( ! valid )
{
2018-06-03 00:48:12 +02:00
MDEBUG ( " invalid hash for blocks " < < n * HASH_OF_HASHES_STEP < < " - " < < ( n * HASH_OF_HASHES_STEP + HASH_OF_HASHES_STEP - 1 ) ) ;
2017-09-13 22:03:04 +02:00
break ;
}
size_t end = n * HASH_OF_HASHES_STEP + HASH_OF_HASHES_STEP ;
for ( size_t i = n * HASH_OF_HASHES_STEP ; i < end ; + + i )
{
2017-10-15 18:54:35 +02:00
CHECK_AND_ASSERT_MES ( m_blocks_hash_check [ i ] = = crypto : : null_hash | | m_blocks_hash_check [ i ] = = data [ i - first_index * HASH_OF_HASHES_STEP ] ,
2017-09-13 22:03:04 +02:00
0 , " Consistency failure in m_blocks_hash_check construction " ) ;
m_blocks_hash_check [ i ] = data [ i - first_index * HASH_OF_HASHES_STEP ] ;
}
usable + = HASH_OF_HASHES_STEP ;
}
else
{
// if after the end of the precomputed blocks, accept anything
usable + = HASH_OF_HASHES_STEP ;
if ( usable > hashes . size ( ) )
usable = hashes . size ( ) ;
}
}
MDEBUG ( " usable: " < < usable < < " / " < < hashes . size ( ) ) ;
CHECK_AND_ASSERT_MES ( usable < std : : numeric_limits < uint64_t > : : max ( ) / 2 , 0 , " usable is negative " ) ;
return usable ;
}
2018-11-12 04:02:21 +01:00
bool Blockchain : : calc_batched_governance_reward ( uint64_t height , uint64_t & reward ) const
{
reward = 0 ;
2020-03-10 20:40:21 +01:00
auto hard_fork_version = get_ideal_hard_fork_version ( height ) ;
2018-11-12 04:02:21 +01:00
if ( hard_fork_version < = network_version_9_service_nodes )
{
return true ;
}
if ( ! height_has_governance_output ( nettype ( ) , hard_fork_version , height ) )
{
return true ;
}
// Ignore governance reward and payout instead the last
// GOVERNANCE_BLOCK_REWARD_INTERVAL number of blocks governance rewards. We
// come back for this height's rewards in the next interval. The reward is
2020-03-10 20:40:21 +01:00
// 0 if it's not time to pay out the batched payments (in which case we
// already returned, above).
2018-11-12 04:02:21 +01:00
2020-07-21 22:40:17 +02:00
size_t num_blocks = cryptonote : : get_config ( nettype ( ) ) . GOVERNANCE_REWARD_INTERVAL_IN_BLOCKS ;
2018-11-12 04:02:21 +01:00
2020-03-10 20:40:21 +01:00
// Fixed reward starting at HF15
if ( hard_fork_version > = network_version_15_lns )
{
reward = num_blocks * (
hard_fork_version > = network_version_16 ? FOUNDATION_REWARD_HF16 : FOUNDATION_REWARD_HF15 ) ;
return true ;
}
uint64_t start_height = height - num_blocks ;
2018-11-12 04:02:21 +01:00
if ( height < num_blocks )
{
start_height = 0 ;
num_blocks = height ;
}
std : : vector < std : : pair < cryptonote : : blobdata , cryptonote : : block > > blocks ;
if ( ! get_blocks ( start_height , num_blocks , blocks ) )
{
LOG_ERROR ( " Unable to get historical blocks to calculated batched governance payment " ) ;
return false ;
}
for ( const auto & it : blocks )
{
cryptonote : : block const & block = it . second ;
if ( block . major_version > = network_version_10_bulletproofs )
2020-03-10 20:40:21 +01:00
reward + = derive_governance_from_block_reward ( nettype ( ) , block , hard_fork_version ) ;
2018-11-12 04:02:21 +01:00
}
return true ;
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
//------------------------------------------------------------------
// ND: Speedups:
// 1. Thread long_hash computations if possible (m_max_prepare_blocks_threads = nthreads, default = 4)
// 2. Group all amounts (from txs) and related absolute offsets and form a table of tx_prefix_hash
// vs [k_image, output_keys] (m_scan_table). This is faster because it takes advantage of bulk queries
// and is threaded if possible. The table (m_scan_table) will be used later when querying output
// keys.
2019-06-26 06:00:05 +02:00
bool Blockchain : : prepare_handle_incoming_blocks ( const std : : vector < block_complete_entry > & blocks_entry , std : : vector < block > & blocks )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MTRACE ( " Blockchain:: " < < __func__ ) ;
2015-12-14 06:40:16 +01:00
TIME_MEASURE_START ( prepare ) ;
2017-09-17 01:12:42 +02:00
uint64_t bytes = 0 ;
2018-07-21 12:54:48 +02:00
size_t total_txs = 0 ;
2018-11-23 12:15:04 +01:00
blocks . clear ( ) ;
2017-05-14 15:06:55 +02:00
// Order of locking must be:
// m_incoming_tx_lock (optional)
// m_tx_pool lock
// blockchain lock
//
// Something which takes the blockchain lock may never take the txpool lock
// if it has not provably taken the txpool lock earlier
//
2019-12-25 05:15:25 +01:00
// The txpool lock and blockchain lock are now taken here
2017-05-14 15:06:55 +02:00
// and released in cleanup_handle_incoming_blocks. This avoids issues
// when something uses the pool, which now uses the blockchain and
// needs a batch, since a batch could otherwise be active while the
// txpool and blockchain locks were not held
2019-12-24 18:36:52 +01:00
std : : lock ( m_tx_pool , * this ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
if ( blocks_entry . size ( ) = = 0 )
return false ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2017-09-17 01:12:42 +02:00
for ( const auto & entry : blocks_entry )
{
bytes + = entry . block . size ( ) ;
2019-06-04 05:50:31 +02:00
bytes + = entry . checkpoint . size ( ) ;
2017-09-17 01:12:42 +02:00
for ( const auto & tx_blob : entry . txs )
{
bytes + = tx_blob . size ( ) ;
}
2018-07-21 12:54:48 +02:00
total_txs + = entry . txs . size ( ) ;
2017-09-17 01:12:42 +02:00
}
2018-08-01 12:09:35 +02:00
m_bytes_to_sync + = bytes ;
2019-12-24 18:36:52 +01:00
while ( ! m_db - > batch_start ( blocks_entry . size ( ) , bytes ) ) {
unlock ( ) ;
2017-05-14 15:06:55 +02:00
m_tx_pool . unlock ( ) ;
2019-12-24 18:36:52 +01:00
epee : : misc_utils : : sleep_no_w ( 100 ) ;
std : : lock ( m_tx_pool , * this ) ;
2017-01-14 20:28:17 +01:00
}
2019-05-24 10:33:19 +02:00
m_batch_success = true ;
2016-12-26 23:29:46 +01:00
2018-11-10 14:46:37 +01:00
const uint64_t height = m_db - > height ( ) ;
if ( ( height + blocks_entry . size ( ) ) < m_blocks_hash_check . size ( ) )
2015-12-14 06:40:16 +01:00
return true ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
bool blocks_exist = false ;
2017-09-14 05:39:37 +02:00
tools : : threadpool & tpool = tools : : threadpool : : getInstance ( ) ;
2018-11-10 14:46:37 +01:00
unsigned threads = tpool . get_max_concurrency ( ) ;
blocks . resize ( blocks_entry . size ( ) ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
{
// limit threads, default limit = 4
if ( threads > m_max_prepare_blocks_threads )
threads = m_max_prepare_blocks_threads ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2018-11-10 14:46:37 +01:00
unsigned int batches = blocks_entry . size ( ) / threads ;
unsigned int extra = blocks_entry . size ( ) % threads ;
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MDEBUG ( " block_batches: " < < batches ) ;
2015-12-14 06:40:16 +01:00
std : : vector < std : : unordered_map < crypto : : hash , crypto : : hash > > maps ( threads ) ;
auto it = blocks_entry . begin ( ) ;
2018-11-10 14:46:37 +01:00
unsigned blockidx = 0 ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2018-11-20 21:19:39 +01:00
const crypto : : hash tophash = m_db - > top_block_hash ( ) ;
2018-11-10 14:46:37 +01:00
for ( unsigned i = 0 ; i < threads ; i + + )
2015-12-14 06:40:16 +01:00
{
2018-11-10 14:46:37 +01:00
for ( unsigned int j = 0 ; j < batches ; j + + , + + blockidx )
2015-12-14 06:40:16 +01:00
{
2018-11-10 14:46:37 +01:00
block & block = blocks [ blockidx ] ;
2018-12-13 20:47:47 +01:00
crypto : : hash block_hash ;
2015-12-14 06:40:16 +01:00
2018-12-13 20:47:47 +01:00
if ( ! parse_and_validate_block_from_blob ( it - > block , block , block_hash ) )
2018-11-10 14:46:37 +01:00
return false ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
// check first block and skip all blocks if its not chained properly
2018-11-10 14:46:37 +01:00
if ( blockidx = = 0 )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2015-12-14 06:40:16 +01:00
if ( block . prev_id ! = tophash )
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MDEBUG ( " Skipping prepare blocks. New blocks don't belong to chain. " ) ;
2018-11-23 14:05:48 +01:00
blocks . clear ( ) ;
2015-12-14 06:40:16 +01:00
return true ;
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2018-12-13 20:47:47 +01:00
if ( have_block ( block_hash ) )
2015-12-14 06:40:16 +01:00
blocks_exist = true ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
std : : advance ( it , 1 ) ;
}
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2018-11-10 14:46:37 +01:00
for ( unsigned i = 0 ; i < extra & & ! blocks_exist ; i + + , blockidx + + )
2015-12-14 06:40:16 +01:00
{
2018-11-10 14:46:37 +01:00
block & block = blocks [ blockidx ] ;
2018-12-13 20:47:47 +01:00
crypto : : hash block_hash ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2018-12-13 20:47:47 +01:00
if ( ! parse_and_validate_block_from_blob ( it - > block , block , block_hash ) )
2018-11-10 14:46:37 +01:00
return false ;
2015-12-14 06:40:16 +01:00
2018-12-13 20:47:47 +01:00
if ( have_block ( block_hash ) )
2015-12-14 06:40:16 +01:00
blocks_exist = true ;
std : : advance ( it , 1 ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2015-12-14 06:40:16 +01:00
if ( ! blocks_exist )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2015-12-14 06:40:16 +01:00
m_blocks_longhash_table . clear ( ) ;
2017-07-27 19:18:49 +02:00
uint64_t thread_height = height ;
2017-09-14 05:39:37 +02:00
tools : : threadpool : : waiter waiter ;
2019-06-01 17:23:22 +02:00
m_prepare_height = height ;
m_prepare_nblocks = blocks_entry . size ( ) ;
m_prepare_blocks = & blocks ;
2018-11-10 14:46:37 +01:00
for ( unsigned int i = 0 ; i < threads ; i + + )
2015-12-14 06:40:16 +01:00
{
2018-11-10 14:46:37 +01:00
unsigned nblocks = batches ;
if ( i < extra )
+ + nblocks ;
2020-06-02 01:36:30 +02:00
tpool . submit ( & waiter , [ this , thread_height , blocks = epee : : span < const block > ( & blocks [ thread_height - height ] , nblocks ) , & map = maps [ i ] ]
{ block_longhash_worker ( thread_height , blocks , map ) ; } , true ) ;
2018-11-10 14:46:37 +01:00
thread_height + = nblocks ;
2015-12-14 06:40:16 +01:00
}
2018-04-26 12:44:47 +02:00
waiter . wait ( & tpool ) ;
2019-06-01 17:23:22 +02:00
m_prepare_height = 0 ;
2015-12-14 06:40:16 +01:00
2016-12-04 13:27:45 +01:00
if ( m_cancel )
2019-06-04 05:50:31 +02:00
return false ;
2016-12-04 13:27:45 +01:00
2015-12-14 06:40:16 +01:00
for ( const auto & map : maps )
{
m_blocks_longhash_table . insert ( map . begin ( ) , map . end ( ) ) ;
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2015-12-14 06:40:16 +01:00
}
2016-12-04 13:27:45 +01:00
if ( m_cancel )
return false ;
2015-12-14 06:40:16 +01:00
if ( blocks_exist )
{
2018-11-23 14:05:48 +01:00
MDEBUG ( " Skipping remainder of prepare blocks. Blocks exist. " ) ;
2015-12-14 06:40:16 +01:00
return true ;
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
m_fake_scan_time = 0 ;
m_fake_pow_calc_time = 0 ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
m_scan_table . clear ( ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
TIME_MEASURE_FINISH ( prepare ) ;
m_fake_pow_calc_time = prepare / blocks_entry . size ( ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
if ( blocks_entry . size ( ) > 1 & & threads > 1 & & m_show_time_stats )
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MDEBUG ( " Prepare blocks took: " < < prepare < < " ms " ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
TIME_MEASURE_START ( scantable ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
// [input] stores all unique amounts found
std : : vector < uint64_t > amounts ;
// [input] stores all absolute_offsets for each amount
std : : map < uint64_t , std : : vector < uint64_t > > offset_map ;
// [output] stores all output_data_t for each absolute_offset
2018-12-24 16:35:42 +01:00
std : : map < uint64_t , std : : vector < output_data_t > > tx_map ;
2018-07-21 12:54:48 +02:00
std : : vector < std : : pair < cryptonote : : transaction , crypto : : hash > > txes ( total_txs ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
# define SCAN_TABLE_QUIT(m) \
2019-05-01 08:01:17 +02:00
do { \
MERROR_VER ( m ) ; \
m_scan_table . clear ( ) ; \
return false ; \
} while ( 0 ) ; \
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
// generate sorted tables for all amounts and absolute offsets
2018-11-10 14:46:37 +01:00
size_t tx_index = 0 , block_index = 0 ;
2015-12-14 06:40:16 +01:00
for ( const auto & entry : blocks_entry )
{
2016-12-04 13:27:45 +01:00
if ( m_cancel )
return false ;
2015-12-14 06:40:16 +01:00
for ( const auto & tx_blob : entry . txs )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2018-07-21 12:54:48 +02:00
if ( tx_index > = txes . size ( ) )
SCAN_TABLE_QUIT ( " tx_index is out of sync " ) ;
transaction & tx = txes [ tx_index ] . first ;
crypto : : hash & tx_prefix_hash = txes [ tx_index ] . second ;
+ + tx_index ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2018-07-21 12:54:48 +02:00
if ( ! parse_and_validate_tx_base_from_blob ( tx_blob , tx ) )
2015-12-14 06:40:16 +01:00
SCAN_TABLE_QUIT ( " Could not parse tx from incoming blocks. " ) ;
2018-07-21 12:54:48 +02:00
cryptonote : : get_transaction_prefix_hash ( tx , tx_prefix_hash ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
auto its = m_scan_table . find ( tx_prefix_hash ) ;
if ( its ! = m_scan_table . end ( ) )
SCAN_TABLE_QUIT ( " Duplicate tx found from incoming blocks. " ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
m_scan_table . emplace ( tx_prefix_hash , std : : unordered_map < crypto : : key_image , std : : vector < output_data_t > > ( ) ) ;
its = m_scan_table . find ( tx_prefix_hash ) ;
assert ( its ! = m_scan_table . end ( ) ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
// get all amounts from tx.vin(s)
for ( const auto & txin : tx . vin )
{
2020-06-02 05:47:20 +02:00
const auto & in_to_key = std : : get < txin_to_key > ( txin ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
// check for duplicate
auto it = its - > second . find ( in_to_key . k_image ) ;
if ( it ! = its - > second . end ( ) )
SCAN_TABLE_QUIT ( " Duplicate key_image found from incoming blocks. " ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
amounts . push_back ( in_to_key . amount ) ;
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
// sort and remove duplicate amounts from amounts list
std : : sort ( amounts . begin ( ) , amounts . end ( ) ) ;
auto last = std : : unique ( amounts . begin ( ) , amounts . end ( ) ) ;
amounts . erase ( last , amounts . end ( ) ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
// add amount to the offset_map and tx_map
for ( const uint64_t & amount : amounts )
{
if ( offset_map . find ( amount ) = = offset_map . end ( ) )
offset_map . emplace ( amount , std : : vector < uint64_t > ( ) ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
if ( tx_map . find ( amount ) = = tx_map . end ( ) )
tx_map . emplace ( amount , std : : vector < output_data_t > ( ) ) ;
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
// add new absolute_offsets to offset_map
for ( const auto & txin : tx . vin )
{
2020-06-02 05:47:20 +02:00
const auto & in_to_key = std : : get < txin_to_key > ( txin ) ;
2015-12-14 06:40:16 +01:00
// no need to check for duplicate here.
auto absolute_offsets = relative_output_offsets_to_absolute ( in_to_key . key_offsets ) ;
for ( const auto & offset : absolute_offsets )
offset_map [ in_to_key . amount ] . push_back ( offset ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2018-11-10 14:46:37 +01:00
+ + block_index ;
2015-12-14 06:40:16 +01:00
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2017-08-01 15:06:12 +02:00
// sort and remove duplicate absolute_offsets in offset_map
for ( auto & offsets : offset_map )
{
std : : sort ( offsets . second . begin ( ) , offsets . second . end ( ) ) ;
auto last = std : : unique ( offsets . second . begin ( ) , offsets . second . end ( ) ) ;
offsets . second . erase ( last , offsets . second . end ( ) ) ;
}
2018-11-01 18:24:35 +01:00
// gather all the output keys
2017-09-14 05:39:37 +02:00
threads = tpool . get_max_concurrency ( ) ;
2015-12-14 06:40:16 +01:00
if ( ! m_db - > can_thread_bulk_indices ( ) )
threads = 1 ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2018-10-31 20:02:47 +01:00
if ( threads > 1 & & amounts . size ( ) > 1 )
2015-12-14 06:40:16 +01:00
{
2017-09-14 05:39:37 +02:00
tools : : threadpool : : waiter waiter ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
for ( size_t i = 0 ; i < amounts . size ( ) ; i + + )
{
uint64_t amount = amounts [ i ] ;
2020-06-02 01:36:30 +02:00
tpool . submit ( & waiter , [ this , amount , & offsets = offset_map [ amount ] , & outputs = tx_map [ amount ] ]
{ output_scan_worker ( amount , offsets , outputs ) ; } , true ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2018-04-26 12:44:47 +02:00
waiter . wait ( & tpool ) ;
2015-12-14 06:40:16 +01:00
}
else
{
for ( size_t i = 0 ; i < amounts . size ( ) ; i + + )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2015-12-14 06:40:16 +01:00
uint64_t amount = amounts [ i ] ;
2018-12-24 16:35:42 +01:00
output_scan_worker ( amount , offset_map [ amount ] , tx_map [ amount ] ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2015-12-14 06:40:16 +01:00
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
// now generate a table for each tx_prefix and k_image hashes
2018-07-21 12:54:48 +02:00
tx_index = 0 ;
2015-12-14 06:40:16 +01:00
for ( const auto & entry : blocks_entry )
{
2016-12-04 13:27:45 +01:00
if ( m_cancel )
return false ;
2015-12-14 06:40:16 +01:00
for ( const auto & tx_blob : entry . txs )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2018-07-21 12:54:48 +02:00
if ( tx_index > = txes . size ( ) )
SCAN_TABLE_QUIT ( " tx_index is out of sync " ) ;
const transaction & tx = txes [ tx_index ] . first ;
const crypto : : hash & tx_prefix_hash = txes [ tx_index ] . second ;
+ + tx_index ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
auto its = m_scan_table . find ( tx_prefix_hash ) ;
if ( its = = m_scan_table . end ( ) )
SCAN_TABLE_QUIT ( " Tx not found on scan table from incoming blocks. " ) ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
for ( const auto & txin : tx . vin )
{
2020-06-02 05:47:20 +02:00
const txin_to_key & in_to_key = std : : get < txin_to_key > ( txin ) ;
2015-12-14 06:40:16 +01:00
auto needed_offsets = relative_output_offsets_to_absolute ( in_to_key . key_offsets ) ;
std : : vector < output_data_t > outputs ;
for ( const uint64_t & offset_needed : needed_offsets )
{
size_t pos = 0 ;
bool found = false ;
for ( const uint64_t & offset_found : offset_map [ in_to_key . amount ] )
{
if ( offset_needed = = offset_found )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2015-12-14 06:40:16 +01:00
found = true ;
break ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2015-12-14 06:40:16 +01:00
+ + pos ;
}
if ( found & & pos < tx_map [ in_to_key . amount ] . size ( ) )
outputs . push_back ( tx_map [ in_to_key . amount ] . at ( pos ) ) ;
else
break ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2015-12-14 06:40:16 +01:00
its - > second . emplace ( in_to_key . k_image , outputs ) ;
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2015-12-14 06:40:16 +01:00
}
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
2015-12-14 06:40:16 +01:00
TIME_MEASURE_FINISH ( scantable ) ;
if ( total_txs > 0 )
{
m_fake_scan_time = scantable / total_txs ;
if ( m_show_time_stats )
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 17:34:23 +01:00
MDEBUG ( " Prepare scantable took: " < < scantable < < " ms " ) ;
2015-12-14 06:40:16 +01:00
}
return true ;
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
}
2018-10-31 09:31:13 +01:00
void Blockchain : : add_txpool_tx ( const crypto : : hash & txid , const cryptonote : : blobdata & blob , const txpool_tx_meta_t & meta )
2017-05-14 15:06:55 +02:00
{
2018-10-31 09:31:13 +01:00
m_db - > add_txpool_tx ( txid , blob , meta ) ;
2017-05-14 15:06:55 +02:00
}
void Blockchain : : update_txpool_tx ( const crypto : : hash & txid , const txpool_tx_meta_t & meta )
{
m_db - > update_txpool_tx ( txid , meta ) ;
}
void Blockchain : : remove_txpool_tx ( const crypto : : hash & txid )
{
m_db - > remove_txpool_tx ( txid ) ;
}
2017-11-08 13:06:41 +01:00
uint64_t Blockchain : : get_txpool_tx_count ( bool include_unrelayed_txes ) const
2017-05-14 15:06:55 +02:00
{
2017-11-08 13:06:41 +01:00
return m_db - > get_txpool_tx_count ( include_unrelayed_txes ) ;
2017-05-14 15:06:55 +02:00
}
2017-12-14 18:09:30 +01:00
bool Blockchain : : get_txpool_tx_meta ( const crypto : : hash & txid , txpool_tx_meta_t & meta ) const
2017-05-14 15:06:55 +02:00
{
2017-12-14 18:09:30 +01:00
return m_db - > get_txpool_tx_meta ( txid , meta ) ;
2017-05-14 15:06:55 +02:00
}
2017-06-11 16:10:18 +02:00
bool Blockchain : : get_txpool_tx_blob ( const crypto : : hash & txid , cryptonote : : blobdata & bd ) const
{
return m_db - > get_txpool_tx_blob ( txid , bd ) ;
}
2017-05-14 15:06:55 +02:00
cryptonote : : blobdata Blockchain : : get_txpool_tx_blob ( const crypto : : hash & txid ) const
{
return m_db - > get_txpool_tx_blob ( txid ) ;
}
2017-11-08 13:06:41 +01:00
bool Blockchain : : for_all_txpool_txes ( std : : function < bool ( const crypto : : hash & , const txpool_tx_meta_t & , const cryptonote : : blobdata * ) > f , bool include_blob , bool include_unrelayed_txes ) const
2017-05-14 15:06:55 +02:00
{
2017-11-08 13:06:41 +01:00
return m_db - > for_all_txpool_txes ( f , include_blob , include_unrelayed_txes ) ;
2017-05-14 15:06:55 +02:00
}
2019-11-06 07:02:39 +01:00
uint64_t Blockchain : : get_immutable_height ( ) const
{
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { * this } ;
2019-11-06 07:02:39 +01:00
checkpoint_t checkpoint ;
if ( m_db - > get_immutable_checkpoint ( & checkpoint , get_current_blockchain_height ( ) ) )
return checkpoint . height ;
return 0 ;
}
2018-08-01 12:09:35 +02:00
void Blockchain : : set_user_options ( uint64_t maxthreads , bool sync_on_blocks , uint64_t sync_threshold , blockchain_db_sync_mode sync_mode , bool fast_sync )
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 22:09:32 +02:00
{
2017-08-19 20:36:51 +02:00
if ( sync_mode = = db_defaultsync )
{
m_db_default_sync = true ;
sync_mode = db_async ;
}
2015-12-14 06:40:16 +01:00
m_db_sync_mode = sync_mode ;
m_fast_sync = fast_sync ;
2018-08-01 12:09:35 +02:00
m_db_sync_on_blocks = sync_on_blocks ;
m_db_sync_threshold = sync_threshold ;
2015-12-14 06:40:16 +01:00
m_max_prepare_blocks_threads = maxthreads ;
2014-11-02 00:03:37 +01:00
}
2015-09-13 19:09:57 +02:00
2017-08-19 20:36:51 +02:00
void Blockchain : : safesyncmode ( const bool onoff )
{
/* all of this is no-op'd if the user set a specific
* - - db - sync - mode at startup .
*/
if ( m_db_default_sync )
{
m_db - > safesyncmode ( onoff ) ;
m_db_sync_mode = onoff ? db_nosync : db_async ;
}
}
2015-09-13 19:09:57 +02:00
HardFork : : State Blockchain : : get_hard_fork_state ( ) const
{
2015-12-14 06:40:16 +01:00
return m_hardfork - > get_state ( ) ;
2015-09-13 19:09:57 +02:00
}
2015-09-19 17:34:29 +02:00
2015-12-19 15:52:30 +01:00
bool Blockchain : : get_hard_fork_voting_info ( uint8_t version , uint32_t & window , uint32_t & votes , uint32_t & threshold , uint64_t & earliest_height , uint8_t & voting ) const
2015-09-19 17:34:29 +02:00
{
2015-12-19 15:52:30 +01:00
return m_hardfork - > get_voting_info ( version , window , votes , threshold , earliest_height , voting ) ;
2015-09-19 17:34:29 +02:00
}
2015-10-25 11:45:25 +01:00
2018-03-22 18:51:58 +01:00
std : : map < uint64_t , std : : tuple < uint64_t , uint64_t , uint64_t > > Blockchain : : get_output_histogram ( const std : : vector < uint64_t > & amounts , bool unlocked , uint64_t recent_cutoff , uint64_t min_count ) const
2016-03-26 15:30:23 +01:00
{
2018-03-22 18:51:58 +01:00
return m_db - > get_output_histogram ( amounts , unlocked , recent_cutoff , min_count ) ;
2016-03-26 15:30:23 +01:00
}
2019-05-03 00:23:00 +02:00
std : : vector < std : : pair < Blockchain : : block_extended_info , std : : vector < crypto : : hash > > > Blockchain : : get_alternative_chains ( ) const
2016-12-17 12:25:15 +01:00
{
2019-05-03 00:23:00 +02:00
std : : vector < std : : pair < Blockchain : : block_extended_info , std : : vector < crypto : : hash > > > chains ;
2016-12-17 12:25:15 +01:00
2019-05-08 13:11:23 +02:00
blocks_ext_by_hash alt_blocks ;
alt_blocks . reserve ( m_db - > get_alt_block_count ( ) ) ;
2019-09-11 02:19:19 +02:00
m_db - > for_all_alt_blocks ( [ & alt_blocks ] ( const crypto : : hash & blkid , const cryptonote : : alt_block_data_t & data , const cryptonote : : blobdata * block_blob , const cryptonote : : blobdata * checkpoint_blob ) {
if ( ! block_blob )
2019-05-08 13:11:23 +02:00
{
MERROR ( " No blob, but blobs were requested " ) ;
return false ;
}
2019-09-11 02:19:19 +02:00
checkpoint_t checkpoint = { } ;
2019-09-23 03:10:55 +02:00
if ( data . checkpointed & & checkpoint_blob )
2019-05-08 13:11:23 +02:00
{
2019-09-11 02:19:19 +02:00
if ( ! t_serializable_object_from_blob ( checkpoint , * checkpoint_blob ) )
MERROR ( " Failed to parse checkpoint from blob " ) ;
}
cryptonote : : block block ;
if ( cryptonote : : parse_and_validate_block_from_blob ( * block_blob , block ) )
{
2019-09-23 03:10:55 +02:00
block_extended_info bei ( data , std : : move ( block ) , data . checkpointed ? & checkpoint : nullptr ) ;
2019-05-08 13:11:23 +02:00
alt_blocks . insert ( std : : make_pair ( cryptonote : : get_block_hash ( bei . bl ) , std : : move ( bei ) ) ) ;
}
else
MERROR ( " Failed to parse block from blob " ) ;
return true ;
} , true ) ;
for ( const auto & i : alt_blocks )
2016-12-17 12:25:15 +01:00
{
2019-05-08 13:11:23 +02:00
const crypto : : hash top = cryptonote : : get_block_hash ( i . second . bl ) ;
2016-12-17 12:25:15 +01:00
bool found = false ;
2019-05-08 13:11:23 +02:00
for ( const auto & j : alt_blocks )
2016-12-17 12:25:15 +01:00
{
if ( j . second . bl . prev_id = = top )
{
found = true ;
break ;
}
}
if ( ! found )
{
2018-05-20 00:53:05 +02:00
std : : vector < crypto : : hash > chain ;
2016-12-17 12:25:15 +01:00
auto h = i . second . bl . prev_id ;
2018-05-20 00:53:05 +02:00
chain . push_back ( top ) ;
2016-12-17 12:25:15 +01:00
blocks_ext_by_hash : : const_iterator prev ;
2019-05-08 13:11:23 +02:00
while ( ( prev = alt_blocks . find ( h ) ) ! = alt_blocks . end ( ) )
2016-12-17 12:25:15 +01:00
{
2018-05-20 00:53:05 +02:00
chain . push_back ( h ) ;
2016-12-17 12:25:15 +01:00
h = prev - > second . bl . prev_id ;
}
2018-05-20 00:53:05 +02:00
chains . push_back ( std : : make_pair ( i . second , chain ) ) ;
2016-12-17 12:25:15 +01:00
}
}
return chains ;
}
2016-12-04 13:27:45 +01:00
void Blockchain : : cancel ( )
{
m_cancel = true ;
}
2016-09-15 22:55:07 +02:00
# if defined(PER_BLOCK_CHECKPOINT)
2019-10-16 06:05:32 +02:00
static const char expected_block_hashes_hash [ ] = " 8754309c4501f4b1c547c5c14d41dca30e0836a2942b09584ccc43b287040d07 " ;
2018-10-09 14:33:39 +02:00
void Blockchain : : load_compiled_in_block_hashes ( const GetCheckpointsCallback & get_checkpoints )
2015-10-08 04:28:11 +02:00
{
2020-05-29 23:23:39 +02:00
if ( ! get_checkpoints | | ! m_fast_sync )
2015-10-08 04:28:11 +02:00
{
2018-10-09 14:33:39 +02:00
return ;
}
2020-05-29 23:23:39 +02:00
std : : string_view checkpoints = get_checkpoints ( m_nettype ) ;
2018-10-09 14:33:39 +02:00
if ( ! checkpoints . empty ( ) )
{
MINFO ( " Loading precomputed blocks ( " < < checkpoints . size ( ) < < " bytes) " ) ;
2018-02-16 12:04:04 +01:00
if ( m_nettype = = MAINNET )
2017-02-24 00:18:10 +01:00
{
// first check hash
crypto : : hash hash ;
2020-06-01 05:23:11 +02:00
if ( ! tools : : sha256sum_str ( checkpoints , hash ) )
2017-02-24 00:18:10 +01:00
{
MERROR ( " Failed to hash precomputed blocks data " ) ;
return ;
}
MINFO ( " precomputed blocks hash: " < < hash < < " , expected " < < expected_block_hashes_hash ) ;
cryptonote : : blobdata expected_hash_data ;
if ( ! epee : : string_tools : : parse_hexstr_to_binbuff ( std : : string ( expected_block_hashes_hash ) , expected_hash_data ) | | expected_hash_data . size ( ) ! = sizeof ( crypto : : hash ) )
{
MERROR ( " Failed to parse expected block hashes hash " ) ;
return ;
}
const crypto : : hash expected_hash = * reinterpret_cast < const crypto : : hash * > ( expected_hash_data . data ( ) ) ;
if ( hash ! = expected_hash )
{
MERROR ( " Block hash data does not match expected hash " ) ;
return ;
}
}
2018-10-09 14:33:39 +02:00
if ( checkpoints . size ( ) > 4 )
2015-10-08 04:28:11 +02:00
{
2020-05-29 23:23:39 +02:00
uint32_t nblocks ;
std : : memcpy ( & nblocks , checkpoints . data ( ) , 4 ) ;
boost : : endian : : little_to_native_inplace ( nblocks ) ;
2018-02-02 17:50:35 +01:00
if ( nblocks > ( std : : numeric_limits < uint32_t > : : max ( ) - 4 ) / sizeof ( hash ) )
{
MERROR ( " Block hash data is too large " ) ;
return ;
}
2019-09-16 14:18:34 +02:00
const size_t size_needed = 4 + nblocks * ( sizeof ( crypto : : hash ) * 2 ) ;
2019-11-12 13:42:24 +01:00
if ( checkpoints . size ( ) ! = size_needed )
{
2020-06-09 20:18:32 +02:00
MERROR ( " Failed to load hashes - unexpected data size " < < checkpoints . size ( ) < < " , expected " < < size_needed ) ;
2019-11-12 13:42:24 +01:00
return ;
}
else if ( nblocks > 0 & & nblocks > ( m_db - > height ( ) + HASH_OF_HASHES_STEP - 1 ) / HASH_OF_HASHES_STEP )
2015-10-08 04:28:11 +02:00
{
2020-05-29 23:23:39 +02:00
checkpoints . remove_prefix ( 4 ) ;
2017-09-13 22:03:04 +02:00
m_blocks_hash_of_hashes . reserve ( nblocks ) ;
2015-10-08 04:28:11 +02:00
for ( uint32_t i = 0 ; i < nblocks ; i + + )
{
2020-05-29 23:23:39 +02:00
crypto : : hash & hash = m_blocks_hash_of_hashes . emplace_back ( ) ;
std : : memcpy ( hash . data , checkpoints . data ( ) , sizeof ( hash . data ) ) ;
checkpoints . remove_prefix ( sizeof ( hash . data ) ) ;
2015-10-08 04:28:11 +02:00
}
2017-10-15 18:54:35 +02:00
m_blocks_hash_check . resize ( m_blocks_hash_of_hashes . size ( ) * HASH_OF_HASHES_STEP , crypto : : null_hash ) ;
2017-02-24 00:18:10 +01:00
MINFO ( nblocks < < " block hashes loaded " ) ;
2015-10-08 04:28:11 +02:00
// FIXME: clear tx_pool because the process might have been
// terminated and caused it to store txs kept by blocks.
// The core will not call check_tx_inputs(..) for these
// transactions in this case. Consequently, the sanity check
// for tx hashes will fail in handle_block_to_main_chain(..)
C++17
Switch loki dev branch to C++17 compilation, and update the code with
various C++17 niceties.
- stop including the (deprecated) lokimq/string_view.h header and
instead switch everything to use std::string_view and `""sv` instead of
`""_sv`.
- std::string_view is much nicer than epee::span, so updated various
loki-specific code to use it instead.
- made epee "portable storage" serialization accept a std::string_view
instead of const lvalue std::string so that we can avoid copying.
- switched from mapbox::variant to std::variant
- use `auto [a, b] = whatever()` instead of `T1 a; T2 b; std::tie(a, b)
= whatever()` in a couple places (in the wallet code).
- switch to std::lock(...) instead of boost::lock(...) for simultaneous
lock acquisition. boost::lock() won't compile in C++17 mode when given
locks of different types.
- removed various pre-C++17 workarounds, e.g. for fold expressions,
unused argument attributes, and byte-spannable object detection.
- class template deduction means lock types no longer have to specify
the mutex, so `std::unique_lock<std::mutex> lock{mutex}` can become
`std::unique_lock lock{mutex}`. This will make switching any mutex
types (e.g. from boost to std mutexes) far easier as you just have to
update the type in the header and everything should work. This also
makes the tools::unique_lock and tools::shared_lock methods redundant
(which were a sort of poor-mans-pre-C++17 way to eliminate the
redundancy) so they are now gone and replaced with direct unique_lock or
shared_lock constructions.
- Redid the LNS validation using a string_view; instead of using raw
char pointers the code now uses a string view and chops off parts of the
view as it validates. So, for instance, it starts with "abcd.loki",
validates the ".loki" and chops the view to "abcd", then validates the
first character and chops to "bcd", validates the last and chops to
"bc", then can just check everything remaining for is-valid-middle-char.
- LNS validation gained a couple minor validation checks in the process:
- slightly tightened the requirement on lokinet addresses to require
that the last character of the mapped address is 'y' or 'o' (the
last base32z char holds only one significant bit).
- In parse_owner_to_generic_owner made sure that the owner value has
the correct size (otherwise we could up end not filling or
overfilling the pubkey buffer).
- Replaced base32z/base64/hex conversions with lokimq's versions which
have a nicer interface, are better optimized, and don't depend on epee.
2020-05-13 20:12:49 +02:00
std : : unique_lock lock { m_tx_pool } ;
2017-05-14 15:06:55 +02:00
2018-04-16 01:16:02 +02:00
std : : vector < transaction > txs ;
2015-10-08 04:28:11 +02:00
m_tx_pool . get_transactions ( txs ) ;
2018-07-18 23:24:53 +02:00
size_t tx_weight ;
2015-10-08 04:28:11 +02:00
uint64_t fee ;
2017-09-22 14:57:20 +02:00
bool relayed , do_not_relay , double_spend_seen ;
2015-10-08 04:28:11 +02:00
transaction pool_tx ;
2018-11-11 15:51:03 +01:00
blobdata txblob ;
2015-10-08 04:28:11 +02:00
for ( const transaction & tx : txs )
{
crypto : : hash tx_hash = get_transaction_hash ( tx ) ;
2018-11-11 15:51:03 +01:00
m_tx_pool . take_tx ( tx_hash , pool_tx , txblob , tx_weight , fee , relayed , do_not_relay , double_spend_seen ) ;
2015-10-08 04:28:11 +02:00
}
}
}
}
}
2016-09-15 22:55:07 +02:00
# endif
2015-10-08 04:28:11 +02:00
2017-07-30 10:45:55 +02:00
bool Blockchain : : is_within_compiled_block_hash_area ( uint64_t height ) const
{
# if defined(PER_BLOCK_CHECKPOINT)
2017-09-13 22:03:04 +02:00
return height < m_blocks_hash_of_hashes . size ( ) * HASH_OF_HASHES_STEP ;
2017-07-30 10:45:55 +02:00
# else
return false ;
# endif
}
2015-10-25 11:45:25 +01:00
bool Blockchain : : for_all_key_images ( std : : function < bool ( const crypto : : key_image & ) > f ) const
{
return m_db - > for_all_key_images ( f ) ;
}
2017-06-01 14:29:51 +02:00
bool Blockchain : : for_blocks_range ( const uint64_t & h1 , const uint64_t & h2 , std : : function < bool ( uint64_t , const crypto : : hash & , const block & ) > f ) const
2015-10-25 11:45:25 +01:00
{
2017-06-01 14:29:51 +02:00
return m_db - > for_blocks_range ( h1 , h2 , f ) ;
2015-10-25 11:45:25 +01:00
}
2017-10-01 12:24:33 +02:00
bool Blockchain : : for_all_transactions ( std : : function < bool ( const crypto : : hash & , const cryptonote : : transaction & ) > f , bool pruned ) const
2015-10-25 11:45:25 +01:00
{
2017-10-01 12:24:33 +02:00
return m_db - > for_all_transactions ( f , pruned ) ;
2015-10-25 11:45:25 +01:00
}
2018-02-19 12:15:15 +01:00
bool Blockchain : : for_all_outputs ( std : : function < bool ( uint64_t amount , const crypto : : hash & tx_hash , uint64_t height , size_t tx_idx ) > f ) const
2015-10-25 11:45:25 +01:00
{
2020-02-15 00:35:53 +01:00
return m_db - > for_all_outputs ( f ) ;
2015-10-25 11:45:25 +01:00
}
2017-01-15 17:05:55 +01:00
2018-02-19 12:15:15 +01:00
bool Blockchain : : for_all_outputs ( uint64_t amount , std : : function < bool ( uint64_t height ) > f ) const
{
2020-02-15 00:35:53 +01:00
return m_db - > for_all_outputs ( amount , f ) ;
2018-02-19 12:15:15 +01:00
}
2016-04-17 12:04:01 +02:00
void Blockchain : : invalidate_block_template_cache ( )
{
MDEBUG ( " Invalidating block template cache " ) ;
m_btc_valid = false ;
}
2019-03-30 21:25:40 +01:00
void Blockchain : : cache_block_template ( const block & b , const cryptonote : : account_public_address & address , const blobdata & nonce , const difficulty_type & diff , uint64_t height , uint64_t expected_reward , uint64_t pool_cookie )
2016-04-17 12:04:01 +02:00
{
MDEBUG ( " Setting block template cache " ) ;
m_btc = b ;
m_btc_address = address ;
m_btc_nonce = nonce ;
m_btc_difficulty = diff ;
2019-03-30 21:25:40 +01:00
m_btc_height = height ;
2016-04-17 12:04:01 +02:00
m_btc_expected_reward = expected_reward ;
m_btc_pool_cookie = pool_cookie ;
m_btc_valid = true ;
}